Recently i received my Xperia Z1C White. After some careful checking (that happens when you are a techy) i noticed that the frame bends slightly inwards at the back side. I made a small example of what i mean on a photo. The problem is. If you can press those parts of the frame inwards, what happens with the waterproof seal between that part of the frame and the plastic bezel on top of this? Is this the case with every Xperia Z1C or is this a rare problem?
I suspect this also is the reason why you can hear a sound while pressing the screen slightly.
Rinneh said:
Recently i received my Xperia Z1C White. After some careful checking (that happens when you are a techy) i noticed that the frame bends slightly inwards at the back side. I made a small example of what i mean on a photo. The problem is. If you can press those parts of the frame inwards, what happens with the waterproof seal between that part of the frame and the plastic bezel on top of this? Is this the case with every Xperia Z1C or is this a rare problem?
I suspect this also is the reason why you can hear a sound while pressing the screen slightly.
Click to expand...
Click to collapse
Same on my phone, but only the charging port side, and my phone squeaks too.
Me too - i can also press the frame inward. Oh my god, i´m a bit confused now...lets hope everything is ok and water is no problem for that...
*EDIT* But i have to say that this also is an issue to find on my Z1 !
Had a bit of convex shape on the back, barely noticeable. Hairdryer and pressing did the trick.
And no, don't be too harsh to the phone.
Glue seems to be unequally applicated.
Made in China after all.
I don't know why, but it doesn't seems any problem with my white phone.
I wonder hwo wide spread or problematic this is. On a normal phone this wouldnt be a problem at all. But on a waterproof phone every error can be a problem.
Mine seems to have the same microscopic gap on the back around the docking port.
I dunked it in a bowl of water and let it sit for 5 minutes. Took it out, dried it off - no problems.
The back of mine flexes when pressed hard in the center, but there are no gaps at the edges (even when pressed)
Is this something they'd accept a warranty replacement for? Where do you go about requesting such?
slvrarrow said:
Is this something they'd accept a warranty replacement for? Where do you go about requesting such?
Click to expand...
Click to collapse
I think no warranty on this, they will probably consider it normal.
The problem with high precision designed devices like this and iphones is, that if something is a bit off you notice it easier.
I do regret it a bit that i didnt exchange it within the 7 days that it is possible to exchange a product after buying it in holland. But if it is widespread, then the case of a phone without the flexing frame/misaligned frame would be very small.
For anyone worried about the waterproof nature of their device, the only thing I can say is - test it. If the product works as intended you're golden. If not, you're covered by warranty.
I'm avid photographer and diver and with all new waterproof equipment, the first thing I do is test their waterproofing by either dunking them in the tub or the sink full of water.
You've bought a device with a capability which you should be able to trust. No need to find out 1 year later when you drop it in the toilet that your device is faulty.
Hejnfelt said:
Mine seems to have the same microscopic gap on the back around the docking port.
Click to expand...
Click to collapse
Same here, only a small gap around docking port that can be ever so slightly pressed in under higher-than-normal pressure, never noticed it in every day handling.
Mine keeps pulling hairs out of my beard!
Sent from my Nexus 7 using Tapatalk
I believe there's a sensor-like surface when you open up one of the flaps (the micro-USB one I think). It's a small white square and it turns red when in contact with water.
This is how the service centres know that you are complying to proper usage. So do be careful not to get the internals wet
That would make sense
Sent from my D5503 using Tapatalk
I have exchanged mine, still a little flex around the charging port but the back is definitely more flush. No small gap and less cracking noise when pressing the back as well. Very content with the built quality of this phone now.
Related
Hi all,
I've recently bought a DEFY. It works quite brilliantly and very fast.
I've noticed that the USB rubber cover of my DEFY is not very firm when closed. There is a little seam between it and the phone body, and the seam grows a bit thicker as it approaches the USB port side. I've included some pics of it.
Higher res pics are at
ishuo.de/images/defy1.jpeg
ishuo.de/images/defy2.jpeg
ishuo.de/images/defy3.jpeg
(Sorry I don't have enough permission to directly link pics here.)
I've also spilled some water onto it under a water tap. When I opened it I could see some water drops on the edge of the inner side of the rubber closer to the back.
I don't know whether this is normal or defect and I'm not sure whether it will stay up against water which is one of its great and practical feature.
Can anyone compare it with yours? Are all DEFYs like this?
Thank loads and happy holidays!
Cheers,
Shuo
When I close mine I am careful to press it in firmly as otherwise it looks "not quite shut." It has to squeeze in there. I presume this what's suppose to keep water out and as I have dunked my phone countless times without incident. However, if you think yours is twisted or bulging when seated, I don't think that's right.
Mine doesn't have that small hump when in place. I think there is some extra rubber under the clip.
Sent from my MB525 using XDA App
s.yang said:
Hi all,
I've recently bought a DEFY. It works quite brilliantly and very fast.
I've noticed that the USB rubber cover of my DEFY is not very firm when closed. There is a little seam between it and the phone body, and the seam grows a bit thicker as it approaches the USB port side. I've included some pics of it.
Higher res pics are at
ishuo.de/images/defy1.jpeg
ishuo.de/images/defy2.jpeg
ishuo.de/images/defy3.jpeg
(Sorry I don't have enough permission to directly link pics here.)
I've also spilled some water onto it under a water tap. When I opened it I could see some water drops on the edge of the inner side of the rubber closer to the back.
I don't know whether this is normal or defect and I'm not sure whether it will stay up against water which is one of its great and practical feature.
Can anyone compare it with yours? Are all DEFYs like this?
Thank loads and happy holidays!
Cheers,
Shuo
Click to expand...
Click to collapse
yeah mines got that, you get the bump when the cover gets bent the other way when you move it to get the usb cable in
After charging mine looks like it will stay with the bulge like that when I put the cover back in place, but even so, I can press it firmly, and it actually snaps into place. Sort of even has a clicking sound. I only started noticing this as before I would press it in even, and the bulge would stay there for a while and slowly smooth itself out, but now if I press it in, and then press my thumb/finger all the way around the cover, it snaps into place very tightly.
EDIT - After looking closely at mine I see the hole is actually at an angle, so pressing it in straight would leave it with the bulge. You need to press it against the angle of the phone for it to snap into place.
bobbyphoenix said:
After looking closely at mine I see the hole is actually at an angle, so pressing it in straight would leave it with the bulge. You need to press it against the angle of the phone for it to snap into place.
Click to expand...
Click to collapse
exactly what i was about to say - works for me.
Wow you are so friendly guys.
Thanks lods! I'll look into it when I come back today!
I did get a slight feel of "snap in". Just dunked it shortly into water, and it still lives!
So I guess it's all right.
I get some moisture around the USB plug hole even when the cover is in place as well. Probably not a big deal. You can try using some grease to improve the seal as well.
Sent from my MB525 using XDA App
One review notes a small amount of "O-ring" sealant or grease around the battery cover rim. I supposed you could add a little. Just don't use vasoline, that's a pertroleum product and will degrade certain types of real and synthetic rubber.
Hello!
Has anyone seen a disassembly guide / dismantlling guide for an xperia play? I have had a quick look and havent seen one. A video one would be really good and one that looks at the digitizer / glass would be best for me as I seem to have broken mine already, oops!
Cheers
That sucks.
If you have Rogers they have a replacement policy. I would try that before you take it apart. Good luck. I haven't seen any guides yet. It is a pretty new phone.
You have a teardown here, it may be useful: http://www.ubmtechinsights.com/teardowns/sony-xperia-play-teardown/
I have found this, but would still like to see a video if one exists?
http://www.repairyourmobile.net/sony-ericsson-disassembly/sony-ericsson-xperia-play-disassembly/
Cheers
You can get a brand new OEM Sony Ericsson Touch Digitizer Screen on eBay from here: http://cgi.ebay.ca/OEM-Touch-Digiti...ultDomain_0&hash=item27bb11025c#ht_4868wt_905
I just ordered an OEM Xperia PLAY Black Housing Set from them and it's on its way. Funny how those "takedown" photos don't show you how they disconnected the sliding screen from the gamepad base. I got stuck at that part and have no idea how they were able to remove it. LOL
Rogers replacement policy doesn't give you the same model.... They have designated refurbished models available at no cost per person per life... You can only use it once... Unless the customer support was lying to me, that is what she told me.
Sent from my R800i using XDA App
Have you dealt with rogers before? The have no issue flatout lying to your face. I cant tell you how many times I got screwed over by those ****ers. So I get the feeling you'd be SOL
Sent from my R800i using XDA App
The only reason I switched over to Rogers was to get the Xperia PLAY for $99.99 on a 3 year agreement. I've been with Fido eversince and even though they're owned by Rogers now, I can say that Fido deals with their customers way better than Rogers does. When my 3 year agreement is done I'm going back with Fido. I already network unlocked my Xperia PLAY so if I still have it by then all I have to do is get a Fido SIM card.
Xperia Play disassembly pictures
Hey,
I am in the middle of taking apart my Xperia Play to replace the screen. Now, I got everything separated and taken apart except the screen half. I am having problem removing these silver rivets, which look like screws with a covering but the covering doesn't peel/come off. I have attached pictures of these in hopes that someone knows how to remove them.
Additionally, if anyone has experience replacing an Xperia Play screen, I'd love the advice.
Thanks in advance.
McD
Screen
Hi
Dont take the rivets OFF! If you just slide the control pad part off the metal casing you can get to the 2 screws you need to get to.
I have just finished replacing my screen and it is the scariest screen i have ever replaced as you need to go from back to front lol
I have attached a pic of my finished product, sorry i should of taken photos during it but i was shaking lol
Flava0ne said:
The only reason I switched over to Rogers was to get the Xperia PLAY for $99.99 on a 3 year agreement. I've been with Fido eversince and even though they're owned by Rogers now, I can say that Fido deals with their customers way better than Rogers does. When my 3 year agreement is done I'm going back with Fido. I already network unlocked my Xperia PLAY so if I still have it by then all I have to do is get a Fido SIM card.
Click to expand...
Click to collapse
I desperately hope that you did not get locked down to a 3 year agreement to just get this phone. As fun as this phone is (and likely to be used long past when I get another phone, just for Emulators and random games), it is not worth a 3 year contract. 2, I can understand. 1 would be more proper. 3 years is nuts in this industry. They have made back their offset of cost within 1.5 years usually.
Video!!
Hi
For anyone else who might benifit from this, here you go:
http://www.youtube.com/watch?v=-3n5ZfkqhzE
Edd
eddieo said:
Hi
For anyone else who might benifit from this, here you go:
http://www.youtube.com/watch?v=-3n5ZfkqhzE
Edd
Click to expand...
Click to collapse
Thanks for that video link, I think it'll really help other people who might need to do some repairs on their own to their Xperia PLAY. I just wish that I came across that video earlier when I had to disassemble mines, I was so nervous when I was doing it cause all I had to go by where those pictures posted earlier and it left out a whole lot that I had to figure out myself.
Replacing Digitizer
Hello, Flava0ne
Do I have to take entire phone apart to replace digitizer? Is there simpler way to do it? Screen is fine - only digitizer is broken. Can it be removed from the top or bottom top access only?
Thank you
WOW sorry, too many tabs open. Wrong topic!!!
(Disregard this post)
Two questions: How far can you go without breaking a warranty seal and how many internal water damage indicators / liquid sensors are there? I just need to check since they are threatening $300 if they find anything and I work in the cold and frequently see condensation. I do avoid condensation actively and don't even allow it in the bathroom when showering.
---------- Post added at 03:01 PM ---------- Previous post was at 02:03 PM ----------
OK, I went as far as I dared by completely taking apart the bottom piece (gamepad, camera, microSD slot, SIM slot, headset/remote jack, primary and secondary microphone, antennas, speakers, microUSB, etc) and, so far, I have found three. It was pretty easy up to this point and I didn't notice any kind of warranty seal.
I just removed all T6 screws from the back and lifted the catches along the bottom (headset/microUSB) side using my fingernail. One corner should be loose and you can start there and slide with no marring (didn't need my plastic pry tool). I don't know why, exactly, but the internal L & R switches are stuck to black adhesive films covering openings in this black piece but I was able to lift and unstick them without touching the films. Anyway, when you remove and flip this piece over, you should see a white square just below the mSD and SIM card slot. It's actually visible through a pinhole on the other side. If it's pink/red, you've got a problem, even if it's caused by condensation (they will still void your warranty for "water damage"). When I touched it, a plastic film on the back slipped off but stuck back on. The whole thing seems like it peels off quite easily.
Anyway, I would wiggle the power button loose before moving on. Next, there are now two tiny cross-head screws that I used a PH00x50 driver on. Yes, one of them was clearly accessible as soon as you removed the battery, but why remove it until you are ready to remove both? Once those are out, let the headphone jack dangle off its ribbon cable and lift the PCB enough to disconnect the display connector from the PCB... just stick something wide and flat in there and twist. Be careful not to damage the tiny ribbon cable that connects the touchpad area from the gamepad because it still needs to be disconnected. Now, this is OPPOSITE of how many larger but similar connectors work, so pay attention: To disconnect it, locate the tiny darker-colored flap of plastic on the opposite side of the connector from where the cable goes in. Lift it from the opposite side toward the side where the cable inserts. It will stand straight up and then you can slide the cable out. If you have to remove it, the headphone/remote jack appears to work the same way.
Anyway, this should completely free the PCB and leave the gamepad shell attached to the display. The gamepad shell should be free from the front half of the phone now as well, leaving only the sliding metal mounting bracket.
Now, a couple of interesting things here: I can clearly tell that one of the T6 screws by the volume button was protruding too far and caused a visible sliding scratch on the underside of my top shell. It may make sense to loosen these a bit on a new phone before this happens. You can also see if imperfections in the white Teflon sliding bumps are causing scratches on the front (my first phone did not, my second did in no time).
Now, let's go back to the gamepad faceplate. The buttons should easily fall out if you want them too, but I was only interested in finding the water sensors and here are two more: one is right by the microphone hole and the other in diagonally opposite under the Playstation Certified logo. They look identical to the one on the back piece.
I'm sure that there is at least one in the LCD assembly as well, but mine is well sealed and I didn't want to lift any of those silvery-gray stickers covering the screws when I have a warranty replacement on the way. I've gone far enough to satisfy my curiosity.
---------- Post added at 03:51 PM ---------- Previous post was at 03:01 PM ----------
A couple notes on re-assembly:
As expected, it's a bit more difficult, especially because you don't have leverage to reconnect the display when it is in place. The last fold of the cable it supposed to fit UNDER the metal bracket and the slide mechanism doesn't really work if it isn't (a certain panel will not slide back if it is not folded under). I'm not sure how it affects it but it does. You will need a thin, long, flat utensil like a plastic butter knife or something to either A) provide leverage to connect the connector or B) tuck the cable back under the bracket after connecting it. You need to have already connected the touchpads and oriented the gamepad faceplate around/under the bracket, though it will not be secured. The phone also needs to be in the open position. When you tuck the cable under, slide it to the closed position and back. If the cable seated properly, the PCB and gamepad faceplate should sit pretty flat and should no longer be falling off of the bracket even though it isn't really secured.
The D-pad needs to be arranged properly as well. One side is cut. If you look closely, there are three holes in the four inner corners that align with three plus-shaped pegs, so you can't get it wrong if you pay attention.
The power/lock button isn't going to stay in place until you secure the bottom housing, so leave it off until just before you are ready to do that to avoid losing it.
Be careful not to seal dust in the camera lens. Don't forget to put the cross-head screws back before you do the back housing because you can't easily access one. Remember to keep the four black screws by the L, R, and volume buttons a little loose if you had a problem with them scratching the other half of the phone.
Be sure to download the Xperia Play test program from the Google Market and verify that all buttons and touch inputs function properly.
I'll be sure to wear my Looxcie next time.
I feel sorry for you blokes taking apart the xperia
it's going to be a royal pain in the ass. especially when you reach that "point"
the point where you have **** all over the table and you are like god how did i get this deep into disassembly
then the part when you are shaking / nervous about breaking a part, or worse yet. you end up breaking it. i would be real scared lol.
all i can say is go real slow. REAL slow
and if anything wont move. dont force it lol
Hogwarts said:
I feel sorry for you blokes taking apart the xperia
it's going to be a royal pain in the ass. especially when you reach that "point"
the point where you have **** all over the table and you are like god how did i get this deep into disassembly
then the part when you are shaking / nervous about breaking a part, or worse yet. you end up breaking it. i would be real scared lol.
all i can say is go real slow. REAL slow
and if anything wont move. dont force it lol
Click to expand...
Click to collapse
Maybe I've just taken apart too many laptops and gadgets before but I never felt that way when I got the back piece completely apart... or maybe "that point" is only after you get into the front assembly. I did the rear in bed with the screws laying on the covers beside me and didn't even lose the arrangement of a single one.
Anyway, moments after getting my RMA replacement shipped email notification this morning, I dropped my R800at that is supposed to be getting sent back and now the touch digitizer is shattered. I've ordered a replacement but I'm hoping that I'll be sending it back with the original from the RMA replacement. Does anyone know if the R800a or R800at will fit a R800 Z1i chassis? These are all over eBay. Also, is there any tamper seal? I understand that there are screws under the silver/gray stickers on the front piece but those look easy enough to reapply.
Did I mention that they wanted to turn my RMA down for the flaking paint on the front buttons alone? The night before I called to RMA for an alarm issue (two days ago), the battery door cracked right at the pry point. I remove it more often than most because I carry a second official battery and a Sony Ericsson EP900 charger, so it failed under normal wear-and-tear, but they wanted to say that I couldn't RMA for my main issue (alarm dismisses itself) because of that EVEN THOUGH THE RMA UNITS DON'T INCLUDE A BATTERY COVER!
Damn. Sony Ericsson can be picky. I babied the thing and only just now dropped it. Perhaps AT&T is a little too cautious with the terms of Sony's warranty (it is processed through them but the rules come from Sony).
CZroe said:
Maybe I've just taken apart too many laptops and gadgets before but I never felt that way when I got the back piece completely apart... or maybe "that point" is only after you get into the front assembly. I did the rear in bed with the screws laying on the covers beside me and didn't even lose the arrangement of a single one.
Anyway, moments after getting my RMA replacement shipped email notification this morning, I dropped my R800at that is supposed to be getting sent back and now the touch digitizer is shattered. I've ordered a replacement but I'm hoping that I'll be sending it back with the original from the RMA replacement. Does anyone know if the R800a or R800at will fit a R800 Z1i chassis? These are all over eBay. Also, is there any tamper seal? I understand that there are screws under the silver/gray stickers on the front piece but those look easy enough to reapply.
Did I mention that they wanted to turn my RMA down for the flaking paint on the front buttons alone? The night before I called to RMA for an alarm issue (two days ago), the battery door cracked right at the pry point. I remove it more often than most because I carry a second official battery and a Sony Ericsson EP900 charger, so it failed under normal wear-and-tear, but they wanted to say that I couldn't RMA for my main issue (alarm dismisses itself) because of that EVEN THOUGH THE RMA UNITS DON'T INCLUDE A BATTERY COVER!
Damn. Sony Ericsson can be picky. I babied the thing and only just now dropped it. Perhaps AT&T is a little too cautious with the terms of Sony's warranty (it is processed through them but the rules come from Sony).
Click to expand...
Click to collapse
I've always said this phone is cheaply made and now i have more proof
mine came brand new out of the box with a blemish on the screen
I'm not picky so i just kept it.
Its a blemish in the LCD screen not the digitizer or glass
and yeah the cheap ass plastic assembly is not helping either.
they should have used aluminum or something. more durable
OK, so I finished the job. I did not see any more water indicators in the top shell and I did not find a single tamper-resistant label in the entire device. I left the slider assembly intact (I think it's riveted) and I didn't peel the flex PCB out of the top shell or off of the touchoads, but it was what anyone would consider "fully disassembled." I seem to have misplaced my camera but video will be coming when I find and edit it.
Is it safe to use it without a case (in case of a drop from like belt height), have you has drops like this and no signs of damage, or you have broken the screen or damaged something from less than that height.
And what about the trident case will it protect good from drops from belt height?
thanks
0mega007 said:
Is it safe to use it without a case (in case of a drop from like belt height), have you has drops like this and no signs of damage, or you have broken the screen or damaged something from less than that height.
And what about the trident case will it protect good from drops from belt height?
thanks
Click to expand...
Click to collapse
Screen is scratch proof basically, I dropped mine 3 times already at waist level still working fine and im not using any case protector as there is no available stuff like that here on my country yet. I advice you use I-shield for your phone.
I've dropped my play from a bit higher than belt height. The battery case popped off and the battery fell out, but once I snapped it back together, it's like it never fell
I have found that the R800x has been no more fragile than any other phone. I had one of those silicone covers on mine for a while but I had to take it off to use the docking station. So after a while I quit using it, and I haven't had any problems. YMMV.
I dropped mine and it fell face down and it hit the screen. It hit the corner of my desk where the those sharp corners are.
Still the screen works fine!
Sent from my R800i using XDA
Wow thanks, i didn't expect it to be so resistant, especially with a big glass screen.
On the other hand, the white plastic is not so fragile.
On my first drop, it hit the ground on the bottom right corner (the Search button area), and a small piece of the white plastic fell off.
vemoxy said:
On the other hand, the white plastic is not so fragile.
On my first drop, it hit the ground on the bottom right corner (the Search button area), and a small piece of the white plastic fell off.
Click to expand...
Click to collapse
What white plastic? The part that the battery back locks in to?
And I believe your choice of words should be "the white plastic is very fragile," indicating that it breaks easily.
It's not that good, I dropped mine on concrete and the digitizer broke straight away, LCD was fine though, before that i also dropped it on the bus and they have that special gritted rubber floor and it scratched the case and the bottons on the back (L1 and R1)
Guess i just have bad luck
ff7fan4eva said:
It's not that good, I dropped mine on concrete and the digitizer broke straight away, LCD was fine though, before that i also dropped it on the bus and they have that special gritted rubber floor and it scratched the case and the bottons on the back (L1 and R1)
Guess i just have bad luck
Click to expand...
Click to collapse
I'm a noob so have to ask this. What is the difference between the screen digitizer breaking and the LCD not ?
So you could see everything on screen but the touch screen wasn't working ?
sufy1000 said:
I'm a noob so have to ask this. What is the difference between the screen digitizer breaking and the LCD not ?
So you could see everything on screen but the touch screen wasn't working ?
Click to expand...
Click to collapse
Well digitizer registers screen touches and lcd displays everything, the digitizer is made from glass so it shatters, in my case it shattered but still registered touches
Dropped from belt level, Just some scratches on one corner, otherwise no damage.
I drop mine several times a week. Never from above 2 or 3 feet, and on carpet, but it's like I never did.
I also regularly wake up and find I'm lying on it.
The most I've dropped previous phones is once or twice (the whole time I've had them), if ever.
I don't know why I drop this phone all the time. Every time I do I think, "That's it, that's the one that ****s it up". Not yet though...
It's a tough phone.
Sent from my R800i using XDA
i droped mine on stairs ... digitizer fully broken, but still recgnoized the touch commands (good work se )
I buyed a new one at Ebay from HongKong for only 20€, open the play, droped out the old and insert the new digitizer and now i'm happy with this great phone again
It won't be as durable as keyboardless phones, I find the Samsung Galaxy phones to be much more durable with Gorilla glass. I can press against the screen to distort the liquid crystal. I have dirt under the screen also, which never happens with the Samsung.
I think all slide out phones require extra care so I will definitely get a case for it, especially the plastic seems easy to scratch.
Well my friend dropped it on the screen at sitting level. It worked fine. I threw it out of my hand once and it fell flat on the screen and it slid down the car ramp on the sidewalks. It survived with only one tiny scrape on the corner, close to the screen. Ever since I took my case off two weeks ago I've been dropping my phone many times. My friend knocked my phone straight out of my hand yesterday and I had chance to catch it. I got lucky.anyway tthis week has been the worst week for my phone because it has been dropped more than any electronic I ever had in aa year!!!
Sent from my R800x using XDA
In my opinion it's a pretty ****ty build quality. Yeah the screen does survive falls from waist height but you should be expecting that from any phone. The hard buttons on the front are quite badly scratched on mine just from normal use. Also I have some scrapes on the corners from the odd drop. And the game pad is scratched I think from sliding the screen up and down so I'm not impressed. I also hate how wobbly the screen is.
Sent from my R800i using XDA
MilkyJoePD said:
I also regularly wake up and find I'm lying on it.
Click to expand...
Click to collapse
LOL, that happens to me too! Good thing is that when you do, the screen becomes smooooth! Sadly it heats up the phone and the digitizer acts up crazy for at least 10 minutes. And yes, it's a tough phone, true that.
Sent from the best gaming android smartphone in the world with the best forum android app in the world
DanielEGVi said:
LOL, that happens to me too! Good thing is that when you do, the screen becomes smooooth! Sadly it heats up the phone and the digitizer acts up crazy for at least 10 minutes. And yes, it's a tough phone, true that.
Sent from the best gaming android smartphone in the world with the best forum android app in the world
Click to expand...
Click to collapse
I love my Xperia PLAY !
-josh- said:
In my opinion it's a pretty ****ty build quality. Yeah the screen does survive falls from waist height but you should be expecting that from any phone. The hard buttons on the front are quite badly scratched on mine just from normal use. Also I have some scrapes on the corners from the odd drop. And the game pad is scratched I think from sliding the screen up and down so I'm not impressed. I also hate how wobbly the screen is.
Sent from my R800i using XDA
Click to expand...
Click to collapse
Yes the gamepad on mine is pretty scratched and my screen is wobbly because I threw my phone in rage with the gamepad slid out.
Sent from my R800x using XDA
Hello there!
I bought my xperia m 10 days ago, and i am pleased so far, except for one thing..
I noticed yesterday that the removable cover has started creaking, especially on the side with no buttons where the usb port is.
Has anyone else noticed that with their device? Is this something that inevitably happens after a while, or should i try to get it replaced because of a defect?
Yes, it started happening a few days after I bought or... If it happens to others too, I'll assume it's inevitable
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Hmm I see..
Well I thought I'd ask because if it is something that is going to happen anyway, i will not bother taking it to the store.
They will have to send the phone to the service center and all that fuss just to replace the back cover, so it is not worth it.
If someone else can also confirm that this is the case with their phone I will be assured.
My phone also makes noises when pushed, most at top right and bottom left corners.
Well I take it there is nothing I can do about it then, so no point in returning it, I will have to live with it...
It is a shame though, because other than that the phone is outstanding in terms of value, I see no reason to spend any more that what I spent on this. It hits the sweet spot for me in the price/performance scale.
Has anyone found any solution to this problem?
I have tried putting little pieces of paper at the hotspots (bottom left and below the usb port in my case) but I had little success...
I am also curious to hear reports from others, maybe a silicon case can lessen the issue...
Cassius Away said:
Has anyone found any solution to this problem?
I have tried putting little pieces of paper at the hotspots (bottom left and below the usb port in my case) but I had little success...
I am also curious to hear reports from others, maybe a silicon case can lessen the issue...
Click to expand...
Click to collapse
I have silicone case, it is the same. I am thinking about using thin layer of hotglue. It can be peeled of easily.
After some experimenting I found that putting a small piece of paper (3mm tall and about 3cm long) between the phone and the cover eliminated the major creaks that where in the lower-middle left side of my phone. I just folded a piece of printer paper in two and cut it to the above dimensions. If you try it make sure to put it in a way that does not block the small plastic clips that clip on the phone.
after the first charge my rubber cover for the battery looks bent. i guess i pried it out and to the left instead of backwards towards the strap and that's how this happened. i have big fingers and it wasn't easy for me to pry it open at all. i tried to bend it back the other direction and it almost sits flush now. it doesn't appear the seal around the actual micro-usb port is damaged, just the outer rim standing up you see. wondering if this is normal, and if it will have any negative effects when it comes to waterproofing.
Yes...exactly the same.
Doesn't look right
tuffluck said:
after the first charge my rubber cover for the battery looks bent. i guess i pried it out and to the left instead of backwards towards the strap and that's how this happened. i have big fingers and it wasn't easy for me to pry it open at all. i tried to bend it back the other direction and it almost sits flush now. it doesn't appear the seal around the actual micro-usb port is damaged, just the outer rim standing up you see. wondering if this is normal, and if it will have any negative effects when it comes to waterproofing.
Click to expand...
Click to collapse
It looks to me like your usb port cover is damaged. I can't believe that pulling it out on the left side instead of the back would bend it permanently like that. I would guess it's defective. If the watch is new and still under warranty, I would probably try to exchange it for another.
I've had my SW3 for about 7 months and have taken the usb rubber cover off many times to charge the watch. So far, it has held up well and still looks new. Click on the below imgur link to see a couple of pics of my SW3 compared to yours.
http://imgur.com/a/Es97z
anyone else? i googled pics of this and all the pictures showed it to be bent the same as mine and onatepp
maybe even helpful if onatepp or others have tried this in the water with no damage...
No need to worry in my opinion. Mine looks the same and I bought mine 7 months ago and several times per week I am taking a shower with it after workout.... I do not think you need a perfect seal to have a waterproof watch, the usb port would not let the moisture into the main body. The rubber cover mainly serves to prevent electrical issues when charging, and maybe corrosion.
You can try with yours
Ok, getting serious, I do not think there is an issue with water. The USB port is sealed.
Will not leak water on the inside. The rubber is meant not to let dust/rubbish inside.
tuffluck said:
anyone else? i googled pics of this and all the pictures showed it to be bent the same as mine and onatepp
maybe even helpful if onatepp or others have tried this in the water with no damage...
Click to expand...
Click to collapse