Lacks loadness though 3.5mm output. - Huawei Ascend P6, Mate

Hi all. Is there lag on my P6 or all of them have issue with low volume through 3.5mm jack? Before had plenty phone running my Dr. Dre Monster Studios and all of them had good vol level. Only my current P6 lacks output power. Have tried various headphones (Sennheisers, Samsung galaxy s3 oem, Huawei P6 oem, iPhone 5 oem, and Monster Studios) but still cant reach same volume level. Have tried couple Google Play apps to increase volume, but they doesn't to job they suppose to do..

Hi! It sounds you are running an old firmware. Which one do you have ? Have you updated ? After I updated to B120 (and then to B125) from B111 or smth similar, the sound went to normal.

klincharov said:
Hi! It sounds you are running an old firmware. Which one do you have ? Have you updated ? After I updated to B120 (and then to B125) from B111 or smth similar, the sound went to normal.
Click to expand...
Click to collapse
Lol - just googled little bit more - and yes - you are right - im running B111.. Will perform update and will see - how does it works after :laugh:

ChewyLV said:
Lol - just googled little bit more - and yes - you are right - im running B111.. Will perform update and will see - how does it works after :laugh:
Click to expand...
Click to collapse
Much better, but for really good audio, I'd advise you to flash HYD52ROM, trust me. It's just awesome.
Sent from my P6-U06 using XDA Premium 4 mobile app

The stock rom got really low poweroutput, and why I don't know.
But as you said, flashing a custom rom will solve that problem and get back to "normal" volume!

Well - B125 aint much louder then B111. Thats quite sad as whole point of Beats Studios are loudness. Will look for some fast custom rom.

ChewyLV said:
Well - B125 aint much louder then B111. Thats quite sad as whole point of Beats Studios are loudness. Will look for some fast custom rom.
Click to expand...
Click to collapse
Try this:
Root
Use root expoler app(es files expoler,etc)
Go folder:ETC/AUDIO/CODEC
Enable root expoler settings your root app set premission RW
And delete asound_UEDGE_ce_NDL.dat files
Set back premission
Rebbot
And now loud as hell

kabirjedi said:
Try this:
Root
Use root expoler app(es files expoler,etc)
Go folder:ETC/AUDIO/CODEC
Enable root expoler settings your root app set premission RW
And delete asound_UEDGE_ce_NDL.dat files
Set back premission
Rebbot
And now loud as hell
Click to expand...
Click to collapse
No need to delete this file, just rename it into asound_UEDGE_ce_NDL.dat.bak , and it will do the job and u wont lose DOLBY DIGITAL sound

mirop1984 said:
No need to delete this file, just rename it into asound_UEDGE_ce_NDL.dat.bak , and it will do the job and u wont lose DOLBY DIGITAL sound
Click to expand...
Click to collapse
If delet this files no lose Dolby Digital.This files about europe ear gurad law.Usless files safe for delete
So delete or rename same effect :Higher volume.
Anyway root need
You're welcome

Worked for me + installed V4A and now runns as hell

ChewyLV said:
Worked for me + installed V4A and now runns as hell
Click to expand...
Click to collapse
V4A is amazing!!
Sent from my P6-U00 using Tapatalk

mirop1984 said:
No need to delete this file, just rename it into asound_UEDGE_ce_NDL.dat.bak , and it will do the job and u wont lose DOLBY DIGITAL sound
Click to expand...
Click to collapse
Just did this, worked and the difference is ridiculous, had to turn off V4A because otherwise it would be too much.
The volume through headphones on 1 (of 15) was louder than my ipod on 4 (of 16)!
With this fix and V4A turned off it's like any other phone.

onmi rom
lmc5b said:
Just did this, worked and the difference is ridiculous, had to turn off V4A because otherwise it would be too much.
The volume through headphones on 1 (of 15) was louder than my ipod on 4 (of 16)!
With this fix and V4A turned off it's like any other phone.
Click to expand...
Click to collapse
whith omnirom you have no problem
and your device is verry fast!

N!ELS huawei p6 said:
whith omnirom you have no problem
and your device is verry fast!
Click to expand...
Click to collapse
Can you hide the navbar on omnirom like you can on the roms based on Huawei's KitKat Beta?
That's the only thing that keeps me from flashing it because I'm really used to that feature.

lmc5b said:
Can you hide the navbar on omnirom like you can on the roms based on Huawei's KitKat Beta?
That's the only thing that keeps me from flashing it because I'm really used to that feature.
Click to expand...
Click to collapse
You can use immersive mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my P6-U06 using Tapatalk

lootjelo said:
You can use immersive mode.
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
Thanks man, I really wanted to try a rom that isn't based on Huawei's stuff but because of low post count I couldn't ask this in the development forum...
Sent from my P6-U06 using xda app-developers app

Related

[MOD][JB] Enable callrecording

In the past i had a Sony-Ericsson C905 Cyber-Shot phone modded with lots of pathces that give my phone a lot of functionalities, one of them was the ability of recording calls, a feature that is ristricted in some countries, ofcorse as all devs know and AFAIK call recording is kernel depedent, to be specific the 3.4.0 kernel witch is the Jelly Bean kernel.
So i whant to share to you the ability to record calls.
Its a port from Xperia V, and tested by myself on Xperia S 6.2.B.0.197 Jelly Bean and works flawlessly
tested on Xperia V JellyBean, and I can make sure it works on Xperia Z and other JB devices.
not tested on ICS but I thought it would work
how does it work:
press menu during the phonecall, you'll find a new "turn on recording" option
record will be auto saved in sdcard/record after you stop it or hang the phone
flash it in CWM
port from LT25c ICS
================================================
update:
Fixed LTE network support in Settings-More-Mobile networks-NetworkMode, LTE mode now is available for ur device, sorry for last version 'cause we don't have LTE network in China.
Enable dual mic noise suppression in "Settings-Call settings", I didn't notice this section in last version for that I apologize
Disable that annoying notify said"disable mobile data blablabla" when you press the Mobiledata toggle in status bar, I used to decompile SemcPhone.apk but it seems too complicated to modify smali by every update, can be solved by this patch.
================================================
like what Samsung did in his own Offical Rom, different patches are used like a switch for different function, as u all know call record is illegal in numbers of countries but not in China, I just accidentally found this patch in Chinese version FTF file, so, it's not my great work actually.
I once woked for gameloft, now I'm a cell phone reseller but still have interested in Android developping, I learned so much from xda, so EVERYONE are welcomed to use this patch in ur rom, it might be fit for all SONY JB device, no necessary to get my permission or inform me, all for one and one for all isn't it?
Click to expand...
Click to collapse
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All credits go to nicemblem
BUGS: it adds the LTE option to networks, but selecting it does nothing sence we dont have LTE,other than that it works with no problem.
The recording is saved in SDcard in "Recorder" folder via .MP3 extension. YES no AMR
IF YOU LIKE THE SHARE PLEASE PRESS THE THX BUTTON
It's fantastic, thanks man.
You are welcome, please test it and report back
beniamin24 said:
You are welcome, please test it and report back
Click to expand...
Click to collapse
i had installed it on my SXS JB leaked version via CWM recovery, i check those option in your screenshot but it doesnt appear and no menu for call recording while calling.
sorry for my bad English...
sorry i got this working now, trying to test to record both side.
thank you
iruganisan said:
i had installed it on my SXS JB leaked version via CWM recovery, i check those option in your screenshot but it doesnt appear and no menu for call recording while calling.
sorry for my bad English...
sorry i got this working now, trying to test to record both side.
thank you
Click to expand...
Click to collapse
Flash the zip then clear cache and dalvik
Nice. Could someone post screenshots in English I can understand it, please?
Gonna install when I actually move to JB.
Felimenta97 said:
Nice. Could someone post screenshots in English I can understand it, please?
Gonna install when I actually move to JB.
Click to expand...
Click to collapse
Here you are
Sent from my LT26i using xda app-developers app
Forzaferrarileo said:
Here you are
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Thank you. Would be even better if it auto recorded every call (or there is an option for that that I missed?)
The miui rom for the Ion has call recording, so shouldn't this work on my phone?
Sent from my stock lt28at(I)
Is there a way too undo this without having to restore a full backup?
Skickat från min LT26i via Tapatalk 2
Galaxen said:
Is there a way too undo this without having to restore a full backup?
Skickat från min LT26i via Tapatalk 2
Click to expand...
Click to collapse
Yes restore your original com.android.phone-res.apk from sistem/ventor/overlay if you had one
would it be possible to make it autocall recorder?
Works great :good:
Galaxen said:
Is there a way too undo this without having to restore a full backup?
Skickat från min LT26i via Tapatalk 2
Click to expand...
Click to collapse
Use semcphone.apk from stock leaked
Sent from my LT26i using xda app-developers app
I'm flashing the zip, but nothing comes up. There is no phone.android-res.apk in system/vendor/overlay so i guess thats why it doesnt work.
andreaspe said:
I'm flashing the zip, but nothing comes up. There is no phone.android-res.apk in system/vendor/overlay so i guess thats why it doesnt work.
Click to expand...
Click to collapse
You should know its for JB only, and during call tick the 3 dots menu then it appears
Yeah its ok. I just thought that it might work on ICS like you said in the OP. Anyway thanks for the post, as soon as i upgrade its gonna be useful !!
andreaspe said:
Yeah its ok. I just thought that it might work on ICS like you said in the OP. Anyway thanks for the post, as soon as i upgrade its gonna be useful !!
Click to expand...
Click to collapse
It works on xperia v ics but not on s, ived tested it on ics after you told me but its worth a try in jb
Sent from my LT26i using xda premium
Hey Ben may I ask one thing?
Why it's all doubled in zip?
It's not problem, I'm just curious.
I'll try to delete one "pair" because I can't see nothing in scripts that explains doubled folders and files.
Ufff...
I just saw this:
This zip is in total mess...
Again, I'll repeat.
This is just bad optimised - zip is good for flashing.
I just saying this.
I guess this file should be 50kb large if it was optimised
Sent from my LT26i using Tapatalk 4
tekk3r said:
Works fine in .96 :good:
Is a autostart zip available?
Click to expand...
Click to collapse
Yeap it does
funky0308 said:
Hey Ben may I ask one thing?
Why it's all doubled in zip?
It's not problem, I'm just curious.
I'll try to delete one "pair" because I can't see nothing in scripts that explains doubled folders and files.
Ufff...
I just saw this:
This zip is in total mess...
Again, I'll repeat.
This is just bad optimised - zip is good for flashing.
I just saying this.
I guess this file should be 50kb large if it was optimised
Sent from my LT26i using Tapatalk 4
Click to expand...
Click to collapse
My bad but it works even like that
Sent from my LT26i using xda app-developers app

[DEV]ART Enabler - Kitkat B506 // This is insane speed!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Huawei said no. PulseDroid said YES!
Hi guys, I've got it right to enable ART on the new B506 CN Firmware!
Wait how..?
Well, when Huawei said they wont give us ART since it is too unstable, they were to lazy to edit the source code, so all they did was hide the "select_runtime" section in Smali. - Unfortunately for them PulseDroid knows Smali.
They've also modified:
Code:
libart.so
libart-compiler.so
core-libart.jar
To act as if they are complete, but it's basically unfinished code.
So what I did was recompile those three from www.github.com/android and edited the development settings smali to show the option in settings.
​
How to get ART
Don't flash this after a clean install, Settings.apk will stop, since it will be the first time loading the ROM and won't recognize the change in apk's. Flash the ROM first, go through the setup, then reboot at flash this.
____________________
Make sure your device is on B506, it will crash other versions.
Download this zip
Flash the zip via TWRP
Reboot
It will say "Android is upgrading", two apps will upgrade.
Go to Settings -> About -> tap Build number seven ( 7 ) times.
Go to Settings -> Developer options -> Select runtime -> Select ART
Reboot ( Boot will take some time )
It will say "Android is upgrading" and upgrade all of the apps ( This will take some time )
Seriously it uses a modified Settings.apk / Provider.apk if you flash this on a Rom not based on B506 you will have problems.
____________________
Revert to stock ( First select Dalvik again )
I wouldn't be able to say if this is Placebo, but it feels really, really fast. NOTE:- Benchmarks wont show improvement since they test Dalvik, not art!
Thanks to @SpaceCaker for the idea to compile from github.com/android
If you add ART this way / with my zip , please credit me
Have fun!
So... How do we enable art ? And is it really that fast ? What about gaming performance ?
Great news :good:
The question now is how to do this?
Ohh godd.. Please don't tell me this is an April fools joke
PulseDroid said:
BRB MUMS CALLING THREAD IN PROGRESS​
Click to expand...
Click to collapse
Tell her, that this thread is with high priority
Ajith Prabhu said:
Ohh godd.. Please don't tell me this is an April fools joke
Click to expand...
Click to collapse
Lol, would be funny as hell! But no
can install install that with Stock Firmware Huawei KitKat B506 CN by surdu_petru ?
relvas18 said:
can install install that with Stock Firmware Huawei KitKat B506 CN by surdu_petru ?
Click to expand...
Click to collapse
That's what it's made for. Yes.
BTW: B506 is stock, Surdu only modded it a bit, like added Root and made it flashable.
It's not a placebo! It's really insane!!!
Thanks!!!
amonev said:
It's not a placebo! It's really insane!!!
Thanks!!!
Click to expand...
Click to collapse
Right?!
Opening apps and transitions are like WHAAT.
It can be used with any rom that has b506 as base? Thanks
Sent from my P6-U06 using Tapatalk 2
Is it stable because it will have a reason why they disabled it I think, on beta art doesn't work why it is working here but hidden?
Gesendet von meinem P6-U06
taaeem said:
Is it stable because it will have a reason why they disabled it I think, on beta art doesn't work why it is working here but hidden?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
It didn't work here either, I recompiled some stuffs to make it work. - I don't yet know how stable it is, haven't used it long enough.
Although I agree it is not quite perfect yet, I think the reason Huawei keeps this from us could be linked to the same reasons we have slow performance, no LTE even tough we could, etc.
cpx07 said:
It can be used with any rom that has b506 as base? Thanks
Sent from my P6-U06 using Tapatalk 2
Click to expand...
Click to collapse
Yes.
taaeem said:
Is it stable because it will have a reason why they disabled it I think, on beta art doesn't work why it is working here but hidden?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
I don't know why is hidden, but it work like a charm! It just FLY! Browser is opening and loading Facebook in just 2 sec. and this is when so many other apps are started!
Ajith Prabhu said:
So... How do we enable art ? And is it really that fast ? What about gaming performance ?
Click to expand...
Click to collapse
Will try that now! wondering about gamming performance
A question: since with ART rom performs faster, also batery drains faster with art enabled?
For gammers: how to get a bit more FPS's: Control your Ascend P6 through Init.d -> http://forum.xda-developers.com/showthread.php?t=2580436
thanks PulseDroid!
RicardoA said:
Will try that now! wondering about gamming performance
A question: since with ART rom performs faster, also batery drains faster with art enabled?
For gammers: how to get a bit more FPS's: Control your Ascend P6 through Init.d -> http://forum.xda-developers.com/showthread.php?t=2580436
thanks PulseDroid!
Click to expand...
Click to collapse
As said before I don't know yet, will check and report back.
But seriously now, I am wondering why it is so much faster, could this have been the P6 problem all along? Bad Dalvik support or something.. hmm.
Whatsapp plus is working? Would be great thx so far
Just found out something: Don't flash this after a clean install, Settings.apk will stop, since it will be the first time loading the ROM and won't recognize the change in apk's.
Also after a bit of play it doesn't seem as fast anymore, will install some games and see how it goes.
Thank you PulseDroid for your work.
I folowed the steps and installed.
For me the results are not spectacular. I didn't seen any changes in speed. In games it is a litlle better but not more.
Maybe do another restart of the system or wipe cash?
I have seen that your results after ART where WOW so why not for me too? I followed the exact steps and installed.
PulseDroid maybe you can give me more advices?
Thank you and congratiolations for your work.

Volume Mod

Here is my edited mixer paths file
It makes your headphones(3 levels) , bluetooth(1 level) and speaker(1 level) louder. Simply Open an explorer I use es file Explorer and go to device and remove the mixer paths xml file and replace it with mine.Make sure you fix permissions before you reboot or you may go to a bootloop.The file is located on device at system folder then etc folder then find the file mixer paths file and move or replace it then put my file in it's place.Then fix permissions on the file or just flash zip in Twrp and reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is file: https://www.dropbox.com/s/2ocsij0cmzynqfe/mixer_paths.xml?dl=0
Here is v1 flashable zip : https://www.dropbox.com/s/1kmm32mrsw0h2bf/GSEdgeTmoVol.zip?dl=0
Here is v2 flashable zip : https://www.dropbox.com/s/zjo5anrx11plh3w/TmoEdgeLoudMod.zip?dl=0
Here is the mixer paths file if you prefer
https://www.dropbox.com/s/2fpvm62e7br4abf/mixer_paths.xml?dl=0
Here is v3 flashable zip : https://www.dropbox.com/s/68cd8iaplmsmcam/TmoEdgeV3Sound.zip?dl=0
Here is mixer paths for v3 : https://www.dropbox.com/s/msym0i1cfbx4rzx/mixer_paths.xml?dl=0
V5 TmoEdgeV5SoundMod:https://www.dropbox.com/s/n9j01cef0m2304c/TmoEdgeV5SoundMod.zip?dl=0
7 levels higher on headphones and bluetooth higher also speaker and ringtones 3 levels higher
Here is V6 Final Zip:https://www.dropbox.com/s/8ppkwuwshng8tty/TmoEdgeV6FinalSound.zip?dl=0
Speaker optimized and headphones louder everything else the same as V5 Enjoy and here is the mixer path file if you rather push:https://www.dropbox.com/s/waxf4rmvkalqwsd/mixer_paths.xml?dl=0
Here is stock one in case you messed it up https://www.dropbox.com/s/5rgory0ppb6aut3/mixer_paths.xml?dl=0
Tested only on the T'Mobile Galaxy S6 Edge variant don't know if it will work on others.
Instructions for viper4android
http://forum.xda-developers.com/showthread.php?t=3072183
raw2000j said:
Here is my edited mixer paths file
It makes your headphones and speaker louder. Simply Open an explorer I use es file Explorer and go to device and remove the mixer paths xml file and replace it with mine.Make sure you fix permissions before you reboot or you may go to a bootloop.The file is located on device at system folder then etc folder then find the file mixer paths file and move or replace it then put my file in it's place.Then fix permission on the file
View attachment 3262539
View attachment 3262542
Here is file: https://www.dropbox.com/s/2ocsij0cmzynqfe/mixer_paths.xml?dl=0
Here is stock one in case you messed it up https://www.dropbox.com/s/5rgory0ppb6aut3/mixer_paths.xml?dl=0
Tested only on the T'Mobile Galaxy S6 Edge variant don't know if it will work on others.
Click to expand...
Click to collapse
Just ended up in a bootloop uuuuugghhhhhh...... So annoyed of hard-reseting this phone over and over again....... I FEEL like I'm going to stop till I'm able to make a backup lol
gdmlaz said:
Just ended up in a bootloop uuuuugghhhhhh...... So annoyed of hard-reseting this phone over and over again....... I FEEL like I'm going to stop till I'm able to make a backup lol
Click to expand...
Click to collapse
Did you fix permissions if you didnt thats why you have a tmobile galaxy s6 edge right I dont know if other variamts have same file.Mine works great
raw2000j said:
Did you fix permissions if you didnt thats why you have a tmobile galaxy s6 edge right I dont know if other variamts have same file.Mine works great
Click to expand...
Click to collapse
Yeap tmobile edge fixed permission checked like 4 times before restarting got stuck on the tmobile boot up part had to Odin back to stock
gdmlaz said:
Yeap tmobile edge fixed permission checked like 4 times before restarting got stuck on the tmobile boot up part had to Odin back to stock
Click to expand...
Click to collapse
Strange mine works you put it same place the other one was?
Good thing I have twrp just in case this messes up SM-G925T
ktetreault14 said:
Good thing I have twrp just in case this messes up SM-G925T
Click to expand...
Click to collapse
Twrp works? Deep sleep works with twrp now?
ktetreault14 said:
Good thing I have twrp just in case this messes up SM-G925T
Click to expand...
Click to collapse
Hope deep sleep works
raw2000j said:
Hope deep sleep works
Click to expand...
Click to collapse
Works fine with his kernel
gdmlaz said:
Works fine with his kernel
Click to expand...
Click to collapse
so u have twrp and stock kernel and phone deep sleeps?
raw2000j said:
so u have twrp and stock kernel and phone deep sleeps?
Click to expand...
Click to collapse
I think the answer to all 25 of your questions is Yes. Deep Sleep with TWRP.
no deep sleep with stock kernel and twrp for me either..
wase4711 said:
no deep sleep with stock kernel and twrp for me either..
Click to expand...
Click to collapse
Modified kernel.
ktetreault14 said:
Modified kernel.
Click to expand...
Click to collapse
which version?
TWRP also work with stock Kernel . The Trick is to flash with flashify. But the modded kernel is smother anyway. Can't wait for development to really take off . (64 bit xposed would be great)
tiboric said:
TWRP also work with stock Kernel . The Trick is to flash with flashify. But the modded kernel is smother anyway. Can't wait for development to really take off . (64 bit xposed would be great)
Click to expand...
Click to collapse
Your telling me!
ktetreault14 said:
Modified kernel.
Click to expand...
Click to collapse
Where is the modified kernel and twrp for the edge?
yup facing bootloop too !!!
dammit !!!!
how do we know if it worked.. i did everything stated and didnt get a boot loop. (sorry i been out the modding for a while.. decided to take the iphone route lol) It been a while
classified_noob said:
how do we know if it worked.. i did everything stated and didnt get a boot loop. (sorry i been out the modding for a while.. decided to take the iphone route lol) It been a while
Click to expand...
Click to collapse
you can tell if its louder than before if it isnt didnt work mine and wifes is louder especially the headphones and it should be louder when you hear tmobile aound on bootup

[170505] [5.1-6.x] [7.x] Xperia X Music and All other Sony Apps by Luncer

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sony Apps for 5.1-6.x Here
Sony Apps for 7.x Here
Play store updates
Notes:
Now there are two different versions for LP, MM and N
To disable automatic headphone detector and get old headphone selection just go to System/build.prop and delete sony.ahc.supported=true (If applicable)
Go Here for Developer Discussion
Instructions
1)Delete Eleven from system/priv-app & Audiofx from system/priv-app.
2)Flash the Main Port zip file and flash update if you want to.
Credits:
@Luncer for everything
eswarvf said:
Works perfect on cm13 and for audio effects to work play song lock and unlock your device
Before flashing delete eleven and audio fx from app and priv-app folder​Go here for other sony apps
For walkman here​
Credits: @Luncer for everything
Click to expand...
Click to collapse
Can we update this app from playstore???
vicky romero said:
Can we update this app from playstore???
Click to expand...
Click to collapse
Update it manually with the given link
eswarvf said:
Update it manually with the given link
Click to expand...
Click to collapse
I think this app is the latest version of sony music but i've flashed some other apps like album and audio recorder. They got an update via playstore. So may be music will also get updates from playstore in future.
vicky romero said:
I think this app is the latest version of sony music but i've flashed some other apps like album and audio recorder. They got an update via playstore. So may be music will also get updates from playstore in future.
Click to expand...
Click to collapse
You are right but playstore wont update music as its saying its incompatible for me. There is something to do with buildprop i think and lets wait if it updates by itself
eswarvf said:
You are right but playstore wont update music as its saying its incompatible for me. There is something to do with buildprop i think and lets wait if it updates by itself
Click to expand...
Click to collapse
Yes! You are right. We have to tweak the build.prop to get the updates.
good job
is it compatible with the CM12.1 Redmi 1s? Using Xcelerate kernel
Ronnie.mac94 said:
is it compatible with the CM12.1 Redmi 1s? Using Xcelerate kernel
Click to expand...
Click to collapse
I am pretty sure it works on cm12.1. Follow the same process and try it
AWesome
i tried this on my redmi 1s running cm 13.0 R19..and it worked!!
Devs have definitely put a lot of effort on this....the music bug which was persistent in all the cm versions and miui too is now vanished just because of this awesome xperia ported music player
I recommend all the redmi 1s users to flash this and give it a try at least
works well with me
eswarvf said:
Works perfect on cm13
Main Port
Update : 9.1.6.A.2.1​
Instructions
1)Delete Eleven from system/priv-app & Audiofx from system/priv-app.
2)Flash the Main Port zip file and flash update if you want to.
Note: For audio effects to work play any song lock and wait 2 sec and unlock your device
For other sony apps go Here​
Credits:
@Luncer for main port
@hkjareda for updates​
Click to expand...
Click to collapse
Thanks bro working flawlessly ...I love your Mods. keep it up.
eswarvf said:
Works perfect on cm13
Main Port
Update : 9.1.6.A.2.1​
Instructions
1)Delete Eleven from system/priv-app & Audiofx from system/priv-app.
2)Flash the Main Port zip file and flash update if you want to.
Note: For audio effects to work play any song lock and wait 2 sec and unlock your device
For other sony apps go Here​
Credits:
@Luncer for main port
@hkjareda for updates​
Click to expand...
Click to collapse
Sometimes Volume rockers not working means we cant decrease volume its very horrible please do the needful.
cpglbitm said:
Sometimes Volume rockers not working means we cant decrease volume its very horrible please do the needful.
Click to expand...
Click to collapse
Just lock screen and wait 2 sec and you will be fine and by the way this is not my work.
Could not turn down volume button
kangramdan666 said:
Could not turn down volume button
Click to expand...
Click to collapse
why? is your vol down button not working or a software issue? and which rom are you using?
eswarvf said:
why? is your vol down button not working or a software issue? and which rom are you using?
Click to expand...
Click to collapse
I use ROM CM12.1 by Kairi
When I tried to turn down the volume, the sound is still the same, can only raise the volume
kangramdan666 said:
I use ROM CM12.1 by Kairi
When I tried to turn down the volume, the sound is still the same, can only raise the volume
Click to expand...
Click to collapse
lock the screen and vol down or vol up and wait 2 sec and unlock you will notice changes in hearing too
eswarvf said:
lock the screen and vol down or vol up and wait 2 sec and unlock you will notice changes in hearing too
Click to expand...
Click to collapse
still the same , nothing changes :crying:
kangramdan666 said:
still the same , nothing changes :crying:
Click to expand...
Click to collapse
Ok use this port for 5.0 then
always looking for walkman music player, but this is nice either.

[MAGISK] SONY BRAVIA ENGINE AND X-RELAITY PORT for Mi A1

Okay, have been out of any kind of development for quite sometime and was just sucking XDA. So, I've something to give back.
I noticed that the Screen of the Mi A1 is (kinda) washed out [maybe cause am generally using the LG G6 and the iPhone 6S]. So, here is the Bravia Engine and X-Reality ports for you guys. I had them ported long ago for the Optimus Black and the SGS Advance as recovery flashables and now I've made a small Magisk Module out of it.
Tested in Oreo and if possible, kindly attest whether it works at all or not.
Zip in attachment. Simply Magisk Flash and reboot. Mine boots back normally.
I flashed it in Oreo stable and booted normally. How to test? I am an old Xperia Z/Z2/Z3 user.
Rajeev said:
I flashed it in Oreo stable and booted normally. How to test? I am an old Xperia Z/Z2/Z3 user.
Click to expand...
Click to collapse
IDK man, See if the Contrast and Saturation is boosted. Am currently making some custom system animation modules for Magisk. Will test them together.
achyut said:
IDK man, See if the Contrast and Saturation is boosted. Am currently making some custom system animation modules for Magisk. Will test them together.
Click to expand...
Click to collapse
Then its not working man. I tested with Sony Album and video app. Nothing changes. Same as old. I disabled ur module then also checked. Same as old. Nothing changes. Same old contrast and saturation...
Rajeev said:
I flashed it in Oreo stable and booted normally. How to test? I am an old Xperia Z/Z2/Z3 user.
Click to expand...
Click to collapse
Rajeev said:
Then its not working man. I tested with Sony Album and video app. Nothing changes. Same as old. I disabled ur module then also checked. Same as old. Nothing changes. Same old contrast and saturation...
Click to expand...
Click to collapse
okay, Thanks. I'll keep this thread and update with something am trying. If am successful Speakers of the A1 is going dual
achyut said:
okay, Thanks. I'll keep this thread and update with something am trying. If am successful Speakers of the A1 is going dual
Click to expand...
Click to collapse
Best of luck brother..
Work on MiA1 ?
Rifqi Huzaini Amrillah said:
Work on MiA1 ?
Click to expand...
Click to collapse
Can't u read some chats in this small thread brother ?
Rajeev said:
Can't u read some chats in this small thread brother ?
Click to expand...
Click to collapse
+1
Enviado desde mi MI PAD 3 mediante Tapatalk
achyut said:
Okay, have been out of any kind of development for quite sometime and was just sucking XDA. So, I've something to give back.
I noticed that the Screen of the Mi A1 is (kinda) washed out [maybe cause am generally using the LG G6 and the iPhone 6S]. So, here is the Bravia Engine and X-Reality ports for you guys. I had them ported long ago for the Optimus Black and the SGS Advance as recovery flashables and now I've made a small Magisk Module out of it.
Tested in Oreo and if possible, kindly attest whether it works at all or not.
Zip in attachment. Simply Magisk Flash and reboot. Mine boots back normally.
Click to expand...
Click to collapse
How to notice different ?
Eqram Slayerz said:
How to notice different ?
Click to expand...
Click to collapse
Its not working....
Rajeev said:
Its not working....
Click to expand...
Click to collapse
I see , thnks
Eqram Slayerz said:
How to notice different ?
Click to expand...
Click to collapse
My experience from Xperia Z2/Z3 compact: on Sony phones, when you browse through pictures via Sony gallery app, it will enhance currently viewed picture. It takes a second to kick in, so first you see "standard" picture and then it "enhances" in front of your eyes, it's quite obvious and can't be missed. However as it's limited to Sony gallery app only and other apps can't utilize this feature, it's quite useless (at least in stock setup, no idea if mods are different).
@achyut @Rajeev
Hi achyut its a big work keep it up,
i think its need hard work to get this dream true. like modify system Setting.apk to add "image enhancement" > in Display like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and a magisk module, system libraries and ....
if you do all these with magisk module i wish you goodluck.
also @Rajeev can better guide you.
excuse me for any ....
Eqram Slayerz said:
How to notice different ?
Click to expand...
Click to collapse
This doesn't work. Read post from rajeev as he has tried it and knows the difference with and without bravia engine.
Frankly i would root A1 without any thought for Bravia engine
achyut said:
Okay, have been out of any kind of development for quite sometime and was just sucking XDA. So, I've something to give back.
I noticed that the Screen of the Mi A1 is (kinda) washed out [maybe cause am generally using the LG G6 and the iPhone 6S]. So, here is the Bravia Engine and X-Reality ports for you guys. I had them ported long ago for the Optimus Black and the SGS Advance as recovery flashables and now I've made a small Magisk Module out of it.
Tested in Oreo and if possible, kindly attest whether it works at all or not.
Zip in attachment. Simply Magisk Flash and reboot. Mine boots back normally.
Click to expand...
Click to collapse
Achyut, any plans to get it working for mi A1? Eagerly waiting for this port. Will root immediately after this mod is available
failed to install

Categories

Resources