[Q] Unable to flsh custom rom on Note 2 N7100 - Galaxy Note II Q&A, Help & Troubleshooting

Hi experts
Need you help. I am a noob and I am trying to flash JellyKatv3 (http://forum.xda-developers.com/showthread.php?t=2593200) Rom on my Note 2 N7100. It starts the installation and then aborts with the below error
Installing...
Setting Permissions..
set_perm: some changes failed
E:Error in /storage/sdcard1/JellyKatv3_N7100DDUENA1.zip
(Status 7)
Installation aborted
I check the logs and found the below
It extracts the files and then this happens
Setting Permissions
set_perm: chown of /system/etc/dbus.conf to 1002
1002 failed: No such file or directory
set_perm: chmod of /system/etc/dbus.conf to 440 failed: No such fi;le or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
E:Error in /storage/sdcard1/JellyKatv3_N7100DDUENA1.zip
(Status 7)
Installation aborted
Beloa are my phone details
Model : N7100
Android version : 4.3
Baseband version : N7100DDDMG1
Kernel version : 3.0.31-1750609 [email protected] #1
Wed Sep 25 18:06:49 KST 2013
Build number : Tigra Rom V3
DN3 ROM : XXUEMI6 v1.0
Recovery : Philz 6.12.8
Please let me know if any further details are needed. I was TWRP but flashed philz recently. I am able to restore using previous nandroid backups but not able to flash roms. I have flashed quite a few roms on my phone but this started happening after I flashed the DN3 rom.
I have attached the screenshots of the logs as well. Any help is much appreciated. Thanks in advance

zain.quraishi said:
Hi experts
Need you help. I am a noob and I am trying to flash JellyKatv3 (http://forum.xda-developers.com/showthread.php?t=2593200) Rom on my Note 2 N7100. It starts the installation and then aborts with the below error
Installing...
Setting Permissions..
set_perm: some changes failed
E:Error in /storage/sdcard1/JellyKatv3_N7100DDUENA1.zip
(Status 7)
Installation aborted
I check the logs and found the below
It extracts the files and then this happens
Setting Permissions
set_perm: chown of /system/etc/dbus.conf to 1002
1002 failed: No such file or directory
set_perm: chmod of /system/etc/dbus.conf to 440 failed: No such fi;le or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
E:Error in /storage/sdcard1/JellyKatv3_N7100DDUENA1.zip
(Status 7)
Installation aborted
Beloa are my phone details
Model : N7100
Android version : 4.3
Baseband version : N7100DDDMG1
Kernel version : 3.0.31-1750609 [email protected] #1
Wed Sep 25 18:06:49 KST 2013
Build number : Tigra Rom V3
DN3 ROM : XXUEMI6 v1.0
Recovery : Philz 6.12.8
Please let me know if any further details are needed. I was TWRP but flashed philz recently. I am able to restore using previous nandroid backups but not able to flash roms. I have flashed quite a few roms on my phone but this started happening after I flashed the DN3 rom.
I have attached the screenshots of the logs as well. Any help is much appreciated. Thanks in advance
Click to expand...
Click to collapse
CAn someone please help me out here

Try with philz v 5.15.
V6 has some bugs.
Do a full wipe before start flashing. Here is philz 5.15.
https://www.dropbox.com/s/9u8ndlypk8yuiky/philz_touch_5.15.0-n7100.zip
Hope it works for you.
Regards.
Sent from my GT-N7100 using XDA Premium 4 mobile app

Thanks Nitol
Actually I replaced philz recovery with CWM recovery and the installation was successful.
Thanks for your response
Sent from my GT-N7100 using XDA Premium App

Related

[Q] Unable to update. Missing Qik.apk

Im trying to update my phone and I the installation aborts. Looking at the recovery log it says that it can't find the qik.apk. Where can I get it so I can update the phone?
failed to stat "/system/app/qik.apk": No such file or directory
file "/system/app/qik.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/app/qik.apk", "5b256baeaa079afa6fbaa0bbed6c4ce1d8e5c938", "00a8ce96e19f6141ccd9d6564b11ad81958ec001")
I:read: ui_print assert failed: apply_patch_check("/system/app/qik.apk", "5b256baeaa079aassert failed: apply_patch_check("/system/app/qik.apk", "5b256baeaa079aI:read: fa6fbaa0bbed6c4ce1d8e5c938", "00a8ce96e19f6141ccd9d6564b11ad81958ec001")
E:unknown command [fa6fbaa0bbed6c4ce1d8e5c938",]
I:read: ui_print
E:Error in /cache/OTA_Supersonic_4.67.651.3-4.54.651.1_releaseecho5vr6xg5c1hzy.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Are you rooted? If so, you shouldn't be taking an update.
Either way, you can find it in any stock rom in the Dev section, however you will need to be rooted to push it to the system folder, which again, if you are rooted you shouldnt be taking an update.
Oh? I am rooted. I didn't know about not accepting updates. What do I do when new software updates come out? Are there rooted versions of them?
SabaBoBaba said:
Oh? I am rooted. I didn't know about not accepting updates. What do I do when new software updates come out? Are there rooted versions of them?
Click to expand...
Click to collapse
Yes there are rooted versions out actually multiple rooted versions of the 4.67 update just head over to the development section and look for them or use the search feature
Sent from my PC36100 using XDA

(solved)Status 7 When install Update

Hi
I Installed the sensation rom. But i allways have some wifi issue so i go back to stock. wiped everything included chache dalvic...
After i installed the custom rom i get an update OTA_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.7-1.28.401.9_release_259295wbmgoi0p47wgsfl6.zip
I tried to install but get an error status 7
I renamed it to update.zip and tried to install.
this didnt work
i download this file manual from a thread here. but this dindt work
what can i do to get the last update?
Running extendedcommand...
Waiting for SD Card to mount (20s)
SD Card mounted...
Verifying SD Card marker...
bbf1350144b25f6e51499717bf478006
I:Running script:
I:
ui_print("ROM Manager Version 5.0.0.6");
ui_print("5. Mai 2012");
ui_print("Preparing to install ROM...");
run_program("/cache/dowipedalvikcache.sh");
assert(install_zip("/sdcard/Download/OTA_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.7-1.28.401.9_release_259295wbmgoi0p47wgsfl6.zip"));
parse returned 0; 0 errors encountered
ROM Manager Version 5.0.0.6
5. Mai 2012
Preparing to install ROM...
about to run program [/cache/dowipedalvikcache.sh] with 1 args
mount: mounting /dev/block/mmcblk0p13 on /cache failed: Device or resource busy
mount: can't find /sd-ext in /etc/fstab
umount: can't umount /sd-ext: No such file or directory
run_program: child exited with status 1
-- Installing: /sdcard/Download/OTA_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.7-1.28.401.9_release_259295wbmgoi0p47wgsfl6.zip
Finding update package...
I:Update location: /sdcard/Download/OTA_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.7-1.28.401.9_release_259295wbmgoi0p47wgsfl6.zip
Opening update package...
Installing update...
checkmid: device mid = PJ4610000
Copying fotaBoot to /data/system for customize reload...
Verifying current system...
file "/system/app/AppSharing.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/app/AppSharing.apk", "afdd27bddd2ffffafeac22857e88b0cb49507f3c", "5b34f2af9b66e8c9a99a4b31224f086ebd293592")
assert failed: apply_patch_check("/system/app/AppSharing.apk", "afdd27bddd2ffffafeac22857e88b0cb49507f3c", "5b34f2af9b66e8c9a99a4b31224f086ebd293592")
E:Error in /sdcard/Download/OTA_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.7-1.28.401.9_release_259295wbmgoi0p47wgsfl6.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/Download/OTA_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.7-1.28.401.9_release_259295wbmgoi0p47wgsfl6.zip")
Click to expand...
Click to collapse
You need stock recovery.
I tried
i flashed the stock Rom. there comes the Update which i cant install
ok i get it i flashed the old boot.img and everythink worked fine...
i extracted it from the old custom rom...
Could you explain how you fixed this? I have exactly the same error: update failed due to error AppSharing.apk - status 7.
It seems OTA is verifying current applications for discrepancies - problem is I have stock recovery and stock ROM which I installed using this RUU from ShippedRoms with verified MD5 > RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed
I'm confused as OTA is perhaps informing itself that AppSharing.apk has been modified... but from a clean install??
Neutrino22 said:
Could you explain how you fixed this? I have exactly the same error: update failed due to error AppSharing.apk - status 7.
It seems OTA is verifying current applications for discrepancies - problem is I have stock recovery and stock ROM which I installed using this RUU from ShippedRoms with verified MD5 > RUU_PYRAMID_ICS_HTC_Europe_3.32.401.5_Radio_11.69.3504.00U_11.22.3504.07_M_release_246089_signed
I'm confused as OTA is perhaps informing itself that AppSharing.apk has been modified... but from a clean install??
Click to expand...
Click to collapse
Errrr... something is wrong here.
BenPope said:
Errrr... something is wrong here.
Click to expand...
Click to collapse
Lol... I'm in marvel at your attention to detail!
Since you're a senior member, could I call upon your wealth of knowledge which you may dispense here, in this very thread?
Warm regards
Neutrino22 said:
Lol... I'm in marvel at your attention to detail!
Click to expand...
Click to collapse
The One X is Endeavor, not Pyramid.
BenPope said:
The One X is Endeavor, not Pyramid.
Click to expand...
Click to collapse
Oh, how could I have missed that! I'm in the wrong forum! Many thanks for highlighting my stupidity (which appears to be boundless!)
Warms regards.
I guess the problem is still the same, but the solution and diagnostics might differ.
I would say you need to check your recovery and boot.img are stock, you are locked, and that you are not installing an RUU with a bootloader older than the currently installed one. But I know nothing of Pyramid.
BenPope said:
I guess the problem is still the same, but the solution and diagnostics might differ.
I would say you need to check your recovery and boot.img are stock, you are locked, and that you are not installing an RUU with a bootloader older than the currently installed one. But I know nothing of Pyramid.
Click to expand...
Click to collapse
It's all working now. Manage to obtain RUU. Thanks!

Delete post

Delete post
Delete post
There are two ROM's on the web, in one of them gets "fixed".
With that also get the error? What is the solution?
Wooow this is amazing work
Sent from my LG-E975 using Tapatalk 4
ZaWoK said:
There are two ROM's on the web, in one of them gets "fixed".
With that also get the error? What is the solution?
Click to expand...
Click to collapse
two ROM's Have stastus 7 error
Sent from my GT-I9300 using xda app-developers app
slg1119 said:
two ROM's Have stastus 7 error
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
This is the updater-script of the ROM: http://www.multiupload.nl/C41I7BMTOL. As someone may know what is the error.
My log of CWM:
Code:
Sense_5_Port_by_Sleepy
Mounting System & data...
Extracting system and data files...
Setting permissions...
set_perm: some changes failed
E:Error in /sdcard/ROMS/Sense5_for_OG_BETA_FIX.zip
(Status 7)
Installation aborted.
Original Thread: http://bbs.gfan.com/android-6210762-1-1.html
ZaWoK said:
This is the updater-script of the ROM: http://www.multiupload.nl/C41I7BMTOL. As someone may know what is the error.
My log of CWM:
Code:
Sense_5_Port_by_Sleepy
Mounting System & data...
Extracting system and data files...
Setting permissions...
set_perm: some changes failed
E:Error in /sdcard/ROMS/Sense5_for_OG_BETA_FIX.zip
(Status 7)
Installation aborted.
Original Thread: http://bbs.gfan.com/android-6210762-1-1.html
Click to expand...
Click to collapse
Please
Advanced -> Show log
and log 2 me
Sent from my GT-I9300 using xda app-developers app
slg1119 said:
Please
Advanced -> Show log
and log 2 me
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Code:
Sense_5_Port_by_Sleepy
Mounting System & data...
Extracting system and data files...
Setting permissions...
set_perm: some changes failed
E:Error in /sdcard/ROMS/Sense5_for_OG_BETA_FIX.zip
(Status 7)
Installation aborted.
set_perm: chown of /system/xbin/sysro to 1000 1000
failed: No such file or directory
set_perm: chmod of /system/xbin/sysro to 755 failed
script aborted: set_perm: some changes failed
set_perm: some changes failed
E:Erroin in /sdcard/ROMS/Sense5_for_OG_BETA_FIX.zip
(Status 7)
Installation aborted.
I:using /data/media for /sdcard/0/CLOCKWORKMOD/ .rec
overy_version.
I:using /data/media for /sdcard/CLOCKWORKMOD/ .recov
ery_version.
I:Can't partition non-vfat: datamedia
I:Can't format unknown volume: /external_sd
I:Can't format unknown volume: /emmc
ZaWoK said:
Code:
Sense_5_Port_by_Sleepy
Mounting System & data...
Extracting system and data files...
Setting permissions...
set_perm: some changes failed
E:Error in /sdcard/ROMS/Sense5_for_OG_BETA_FIX.zip
(Status 7)
Installation aborted.
set_perm: chown of /system/xbin/sysro to 1000 1000
failed: No such file or directory
set_perm: chmod of /system/xbin/sysro to 755 failed
script aborted: set_perm: some changes failed
set_perm: some changes failed
E:Erroin in /sdcard/ROMS/Sense5_for_OG_BETA_FIX.zip
(Status 7)
Installation aborted.
I:using /data/media for /sdcard/0/CLOCKWORKMOD/ .rec
overy_version.
I:using /data/media for /sdcard/CLOCKWORKMOD/ .recov
ery_version.
I:Can't partition non-vfat: datamedia
I:Can't format unknown volume: /external_sd
I:Can't format unknown volume: /emmc
Click to expand...
Click to collapse
Open updater-script
And
delete sysro permission
Sent from my GT-I9300 using xda app-developers app
Someone attach the update script here.... Ill look into this...!!...
Edit: got the file thanx...
Sent from my LG-E975 using xda premium
---------- Post added at 10:13 AM ---------- Previous post was at 10:10 AM ----------
slg1119 said:
sam_0829 May fix this rom
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Its bettr if yu include some more screenies... :thumbup:
Sent from my LG-E975 using xda premium
Is this really working? any more details?
Working?
Can anyone here confirm that this is working? before i download the file?
Thanks!!
any news about updater script?
set-perm fails.. classic
I'm testing the ROM. In short time I say if it works.
EDIT:
Error with:
set_perm(1000, 1000, 0755, "/system/xbin/sysrw");
EDIT2:
delete sysrw perm
edit3:
Load the ROM and appears lockscreen but screen gets totally in black. When sprend a few minutes the mobile reboot.
The ROM isn't functional.
This ROM is CURRENTLY NOT FUNCTIONAL AT ALL.
But It Boots To LockScreen & then it goes black , only status bar is visible.
This is Only Suitable for developers who want to help in this port.
I will work on this in my free time. Hopefully We will get at least somewhat usable PORT

CWM error (my first time)

i was using a nightly version of cm11 but i wanted to use a snapshot on my GT-i9190 i flashed it to stock ROM(tur) but i think i forget the uncheck F. reset time on odin after flashing stock rom i flashed CWM and root-kitv2 but suddenly supersu stops working i updated it from playstore and it backed to working normal but at the flashing CM11-Snapshot it says;
E:Error in /sdcard/0/cm-11-20141112-SNAPSHOT-M12-serrano3gxx.zip
(status 7)
Installation aborted
minzip: extracted file ''/system/xbin/vim''
ApplyParsedPerms: removexattr of /system/etc/install-cwm-recovery.sh to 0 failded: operation not supported on transport endpoint
script aborted: set_metadata_recurvise: some changes failded
E:Error in /sdcard/0/cm-11-20141112-SNAPSHOT-M12-serrano3gxx.zip
(status 7)
Installation aborted
I:using /data/media for /sdcard/0/clockworkmod/.recovery_version.
I:using /data/media for /sdcard/clockworkmod/.recovery_version.
I: can't partition on non v-fat: datamedia
I: can't partition on non v-fat: auto
I: can't format unknown volume: /emmc
what i should to do now?
UPDATE
i was really bored and i flashed original rom again after that flashed philz touch recovery and at the end flashed cm 12 w/o gapps it said stupid things at the start but it works perfect now have nice day!

Trying to flash cm13 on Huawei g7 l01

Hi, I am trying to flash cm13 cm-13.0-20160607-UNOFFICIAL-mparus-g760.zip from this site on my Huawei g7 l01.
I keep getting the following,
E:Error executing updater binary in zip '/
I am using twrp and I'm running lollipop 5.1.1 b331.
I have tried various fixes from Google, but none have worked.
Could someone please help?
Here is a section of the log,
environment initialized.
script aborted: This package is for device: g620s,G620S,hwg620s,hwG620S,G620S-L01,g760,G760,hwg760,G760-L01,G760-L03; this device is .
This package is for device: g620s,G620S,hwg620s,hwG620S,G620S-L01,g760,G760,hwg760,G760-L01,G760-L03; this device is .
I:Legacy property environment disabled
Error flashing zip '/external_sd/Download/cm-13.0-20160607-UNOFFICIAL-mparus-g760.zip
E:Error executing updater binary in zip '/
Hey there,
i had the same problem on my G7-L01 with kitkat 4.4.4. i couldnt find a solution and just gave up. have you had any luck?
Yes, I used another version of twrp (Google twrp Huawei g7) it won't let me post the link.
tupenix said:
Hi, I am trying to flash cm13 cm-13.0-20160607-UNOFFICIAL-mparus-g760.zip from this site on my Huawei g7 l01.
I keep getting the following,
E:Error executing updater binary in zip '/
I am using twrp and I'm running lollipop 5.1.1 b331.
I have tried various fixes from Google, but none have worked.
Could someone please help?
Here is a section of the log,
environment initialized.
script aborted: This package is for device: g620s,G620S,hwg620s,hwG620S,G620S-L01,g760,G760,hwg760,G760-L01,G760-L03; this device is .
This package is for device: g620s,G620S,hwg620s,hwG620S,G620S-L01,g760,G760,hwg760,G760-L01,G760-L03; this device is .
I:Legacy property environment disabled
Error flashing zip '/external_sd/Download/cm-13.0-20160607-UNOFFICIAL-mparus-g760.zip
E:Error executing updater binary in zip '/
Click to expand...
Click to collapse
thats my problem too...thats why id tried to install cm 12.1 and its good to go..... just try to install cm12.1 first before you flash cm13

Categories

Resources