Related
Hello guys
So a friend of mine gave my his phone.
This is the information I get from it:
Model Number: SGH-T999L
Android Version: 4.3
Baseband version: T999LUVUBMK4
Kernel version:
3.0.31-2106417
[email protected] #1
Build Number: JSS15J.T999LUVUBMK4
SE for Android status:
Enforcing
SEPF_SGH-T999L_4.3_0010
Click to expand...
Click to collapse
I've been reading tons of threads and I'm almost ready to root the device but I'd rather ask before doing anything.
1. Can I root this phone as it is? Can anyone point me to the correct thread for this particular setup?
2. I've been reading about KNOX and the "warranty bit" but I'm not in the US so if this "warranty" is just with T-Mobile, then I ready don't care if it's tripped or not. Unless tripping this bit means something else...like, will it prevent me from future rooting, flashing, etc?. Phone is unlocked by the way.
3. I'm pretty sure this 4.3 version was done OTA. I can see an icon that says KNOX (when I click it, it says something like: "click here to install").
4. I'm guessing that there is no way to go to a previous android version, correct?
5. Can I flash the device with a stock 4.3 without KNOX now that I already have 4.3 OTA with KNOX? (presumably since I do not know how to check for it)
6. So what are my options? For me stock rom + root is fine. So again, if someone can tell me the correct thread for my phone, I'd appreciate it.
7. If flashing to docholiday's rom is possible, then I presume I need TWRP or CWD. I'm familiar with TWRP since that is what I have on my Kindle. Do they basically do the same thing? Any advantage of one over the other? Which version? I see so many on Docholiday77's repo Is this the correct one for the T-Mobile T999L: TWRP_d2tmo_2.6.3.1.zip?
8. At this point, any custom recovery I use (TWRP or CWD) will trip the warranty bit. correct? What if I use GooManager?
Is this pretty much what I have to do?
http://www.androidayos.com/2013/12/17/root-tmo-galaxy-s3-t999l-uvubmk4-4-3-update-knox-free/
Sorry for so many questions, but as you can imagine... you can only brick your device once!
Many thanks!
PD: If you guys need for information, please tell me how to get it and I will post back.
EDIT: Ok, more info
ODIN MODE
Custom binary download: no
Current binary: samsung official
Qualcomm secureboot: enabled
Warranty bit: 0
Bootloader RP SWREV: 1
Cool. I soft bricked my phone when ODIN gave me some sort of error.
Trying to fix with Kies.
Back to square one.
Ok, nobody is helping so I guess I will tell you guys my findings.. maybe it helps someone else.
I tried using ODIN with Windows XP on a Vmware guest image on my MAC.
Something obviously went wrong with the usb communication between guest and host computers.
I tried flashing now with ODIN on a "real" Windows XP computer and it's working (half way through flash).
Ok, so I've had wifi issues for awhile with this thing, but apparently the 4.3 update sent it over the edge. (I just updated it last week, since I was out of the country when the update issued).
The issue is, I cannot connect to any wifi, other than my home. Before the update, I could connect to non-home wifi only through various router setting changes, that required admin access to the router. After the update, no matter what I've tried with regards to routers, my home router is the only one I can connect to, and the signal strength is pretty bad on my phone, while it shows very strongly for any other device.
I've tried all the suggestions in just about every thread I could find. I've done several factory resets, I've tried the *#0011# thing. I've tried using static IP addresses. But the phone will do one of two things. After I click connect, after selecting a network, it will say Saved. Or it will try to connect and then go back to Saved, or eventually give the Authentication error.
I'm not 100% familiar with how android is setup, but is there a specific file that I could try to install that might affect this? (Like a driver)
Would replacing the antenna be helpful, or maybe the chip on the mb? Or are those options too extreme?
Any ideas are appreciated.
Nobody has any ideas for me?
Please, I'll try anything.
Still looking for help. Thanks!
Did you try re flashing the firmware? Might be a bug in the software. You'll lose all your data but its worth a shot. I've seen a similar issue like this before on the S III and that took care of the problem.
Brian9391 said:
Did you try re flashing the firmware? Might be a bug in the software. You'll lose all your data but its worth a shot. I've seen a similar issue like this before on the S III and that took care of the problem.
Click to expand...
Click to collapse
Do I use odin to reflash....it's basically like installing a rom, right?
NwFl Griz said:
Do I use odin to reflash....it's basically like installing a rom, right?
Click to expand...
Click to collapse
Yes, you will use Odin to complete this process.
Few things you should consider though, by doing this it will completely reset your phone to a point as if you just un-boxed it (or a factory reset). I am uncertain about the fact that it may hinder you the ability to receive further OTA updates. Like i said I don't know exactly on that one but that will most likely be stated in a thread that you receive the firmware from. Also, this may be a good opportunity for you to root your phone if it was not previously. Doing this could be as simple as downloading one file vs. another to use in Odin. The choice is yours as there are threads regarding both Stock Rooted and Stock non rooted firmwares. Another thing, consider which version you want. Im guessing 4.3? I was once told going down a version on android (i.e. 4.4 to 4.2) could brick a device... also unclear on that. try doing some research if you wish.
If you have the AT&T 4.3 bootloader on your phone, do not use Odin to try and flash any stock ROMs as this may brick your phone. The 4.3 bootloader cannot be downgraded and attempts to do so with probably brick your phone.
Boot into download mode and tell us what it says on the download screen.
audit13 said:
If you have the AT&T 4.3 bootloader on your phone, do not use Odin to try and flash any stock ROMs as this may brick your phone. The 4.3 bootloader cannot be downgraded and attempts to do so with probably brick your phone.
Boot into download mode and tell us what it says on the download screen.
Click to expand...
Click to collapse
I have rooted this device, so when i boot into download mode, I get the android guy with the words "downloading do not turn off target" underneath him. In the top right it says:
Odin mode
product name: SGH-i747
custom binary download: Yes (2 counts)
current binary: custom
system status: custom
qualcomm secureboot: enable
warranty bit: 1
bootloader rp swrev:2
audit13 said:
If you have the AT&T 4.3 bootloader on your phone, do not use Odin to try and flash any stock ROMs as this may brick your phone. The 4.3 bootloader cannot be downgraded and attempts to do so with probably brick your phone.
Boot into download mode and tell us what it says on the download screen.
Click to expand...
Click to collapse
I replied above...still waiting to ensure I don't brick this thing.
I apologize if i am not as clear in this post as I need to be. My dad tried to root his note 2 sgh i371 using odin but said that once he did this, he was unable to access the internet outside of connecting to wifi, he could not get any cellular data. Because of this issue, he tried to then un-root his phone by flashing 4.1.2 stock rom. Unfortunately, the issue of not being able to get cellular data persists. In his frustration, my dad bought a note 3 and gave his note 2 to me saying that if I could fix it I could keep it. This is my first android and I would like to make it my primary phone if possible. what I would like to simply to reset the phone to factory default settings by flashing the latest stock rom for the phone. I have Odin, I was hoping that someone could tell me where I could get the latest stock rom and, if they believed that flashing it would fix the cellular data issue. I do not believe my dad made a backup at all. Thank you in advance.
GreatGrizzwald said:
I apologize if i am not as clear in this post as I need to be. My dad tried to root his note 2 sgh i371 using odin but said that once he did this, he was unable to access the internet outside of connecting to wifi, he could not get any cellular data. Because of this issue, he tried to then un-root his phone by flashing 4.1.2 stock rom. Unfortunately, the issue of not being able to get cellular data persists. In his frustration, my dad bought a note 3 and gave his note 2 to me saying that if I could fix it I could keep it. This is my first android and I would like to make it my primary phone if possible. what I would like to simply to reset the phone to factory default settings by flashing the latest stock rom for the phone. I have Odin, I was hoping that someone could tell me where I could get the latest stock rom and, if they believed that flashing it would fix the cellular data issue. I do not believe my dad made a backup at all. Thank you in advance.
Click to expand...
Click to collapse
Sammobile has all the stock firmwares for our phones, check there. Also check in about phone to see what it says, if it says Baseband unknown, then the EFS folder (and subsequently IMEI #, etc) have been corrupted. It's possible flashing the latest stock firmware will fix it (it includes a new modem and all), so try that first.
http://www.sammobile.com/
absinthesummer said:
Sammobile has all the stock firmwares for our phones, check there. Also check in about phone to see what it says, if it says Baseband unknown, then the EFS folder (and subsequently IMEI #, etc) have been corrupted. It's possible flashing the latest stock firmware will fix it (it includes a new modem and all), so try that first.
Thank you very much for the advice. I am downloading the firmware now. baseband version is showing i317ucama4. Right now the phone is not activated with AT&T, is there a way I could test if I will be able to get cellular data before going to AT&T and activating it?
Click to expand...
Click to collapse
Well you're baseband is good. Just get a little cheap prepaid sim card for testing purposes. The stock firmware should fix anything in the modem or system that could have been corrupted... So flash that and have a cheap at&t Sim handy for testing.
Just use your father's sim card. Either it connects to the GSM network or it doesn't.
absinthesummer said:
Well you're baseband is good. Just get a little cheap prepaid sim card for testing purposes. The stock firmware should fix anything in the modem or system that could have been corrupted... So flash that and have a cheap at&t Sim handy for testing.
Click to expand...
Click to collapse
I attempted to flash the stock rom via odin v. 307 but I get a failed message. The phone shows I have a custom binary download (12 counts), official Samsung binar but, my system status is custom and my knox warranty is void: 1. Then there is a red message stating "unsupported version" at the bottom. The date for the stock rom was Jan 2013 AT&T, US on the sammobile site. I can no longer boot into the phone's OS, I am stuck in download mode until I manually restart and then it displays a message that I need to connect to Kies recovery. Thank you for the help so far, Any chance I can salvage this phone still? I did try going into Kies, but it cannot connect with my phone for some reason?
1425
rangercaptain said:
Just use your father's sim card. Either it connects to the GSM network or it doesn't.
Click to expand...
Click to collapse
Unfortunately, I got the phone when I was visiting home, I currently live a few states away from him. It would definitely make things much simpler if I didn't right now though.
GreatGrizzwald said:
I attempted to flash the stock rom via odin v. 307 but I get a failed message. The phone shows I have a custom binary download (12 counts), official Samsung binar but, my system status is custom and my knox warranty is void: 1. Then there is a red message stating "unsupported version" at the bottom. The date for the stock rom was Jan 2013 AT&T, US on the sammobile site. I can no longer boot into the phone's OS, I am stuck in download mode until I manually restart and then it displays a message that I need to connect to Kies recovery. Thank you for the help so far, Any chance I can salvage this phone still? I did try going into Kies, but it cannot connect with my phone for some reason?
Click to expand...
Click to collapse
It sounds like the phone was updated previously to either 4.3 or 4.4.2, which have Knox and that pesky counter. Technically you can't directly downgrade, so be sure you're downloading firmware that is 4.3 or higher. I didn't realize sammobile only went to MA4 for US AT&T. (In a pinch you can use Canadian firmware, but we have other links for stock firmware). Also, don't worry too much about Kies. It can be helpful, but honestly I could never get my note 2 recognized by kies either.
When I get back from taking my kids to school, I'll gather some links that will help you revive this phone Links below:
@GreatGrizzwald:
More recent links to stock firmware: STOCK PACKAGES TO MK6 This is LJ2 (4.1.2), MK6 (4.3) and up. He's got all the stock firmwares, available for flashing either in recovery on via odin. I've highlighted the one I would use in the attached screenshot (MK6- ODIN)
He also has a thread for NE5 (The latest firmware, 4.4.2) HERE
So if MK6 doesn't work, try NE5. One of those two has to work. You're dad already updated to either 4.3 or 4.4.2, I don't know which so start with 4.3 (MK6) and if it doesn't work try 4.4.2 (NE5)
On those two threads, he has a TON of links that will be helpful to you in getting back to stock also.
And here's a reference page with some useful links: One Stop Shop
This one is dedicated to downgrading back to LJ2 (4.1.2) from 4.3+, it MIGHT come in handy for you: Downgrade Instructions
If you have trouble with the stock firmware, you can also try Chainfire's CF Auto Root. It's stock firmware but it's rooted. Try the other firmwares by Zen Arcade first though CF AUTO ROOT
We'll get it going for you The stock firmware will re-flash the modem and all the configuration files so you're data should work again. Then you can do whatever you want, root, recovery, flash other stuff, or leave it stock. You got this
---------- Post added at 07:51 AM ---------- Previous post was at 07:09 AM ----------
GreatGrizzwald said:
Unfortunately, I got the phone when I was visiting home, I currently live a few states away from him. It would definitely make things much simpler if I didn't right now though.
Click to expand...
Click to collapse
Also you have to figure out if it's software or hardware. I'm inclined to believe it's software so I think if you get it back to stock you'll be good. If it was hardware, it wouldn't even recognize a sim being inserted (recently repaired an htc one mini with this problem, it needed a new Sim tray, thankfully it was only $20).
But it sounds more like a bad flash corrupted some of those important files and configurations controlling data connections, it's all good, if it's software it can definitely be fixed. If it were hardware it could still be fixed it would just be a bit more time consuming.
One more thing, after you flash the stock firmware, and you have a sim card to test with, make sure your apn settings are correct for whichever carrier you're using. If the apn is wrong, or there is no apn listed, it won't connect. If you need assistance with that, let me know.
absinthesummer said:
One more thing, after you flash the stock firmware, and you have a sim card to test with, make sure your apn settings are correct for whichever carrier you're using. If the apn is wrong, or there is no apn listed, it won't connect. If you need assistance with that, let me know.
Click to expand...
Click to collapse
Thank you for all this, I will start working with it today. You have been a huge help.
GreatGrizzwald said:
Thank you for all this, I will start working with it today. You have been a huge help.
Click to expand...
Click to collapse
No problem, I know how much of a pain it can be when things just don't seem to be working. But you have all the resources you need now and I'm gonna talk to my friend who runs the one-stop shop page to see if he will update it and add some of these resources to make it easier for you, and others with similar problems, to find what they need. Good luck!
1100
absinthesummer said:
One more thing, after you flash the stock firmware, and you have a sim card to test with, make sure your apn settings are correct for whichever carrier you're using. If the apn is wrong, or there is no apn listed, it won't connect. If you need assistance with that, let me know.
Click to expand...
Click to collapse
Hey, I was able to flash the stock rom you recommended, everything is working fine. Took the phone to AT&T and got a new sim card, everything seems to be working perfectly. Thank you again for all your assistance. could not have done this without your help.
GreatGrizzwald said:
Hey, I was able to flash the stock rom you recommended, everything is working fine. Took the phone to AT&T and got a new sim card, everything seems to be working perfectly. Thank you again for all your assistance. could not have done this without your help.
Click to expand...
Click to collapse
That is great news! I'm so glad it's working for you. Enjoy your (new-to-you) note 2 and keep those files on hand in case you need them in the future!
absinthesummer said:
No problem, I know how much of a pain it can be when things just don't seem to be working. But you have all the resources you need now and I'm gonna talk to my friend who runs the one-stop shop page to see if he will update it and add some of these resources to make it easier for you, and others with similar problems, to find what they need. Good luck!
Click to expand...
Click to collapse
If I can ask one more question, the phone keeps trying to download and install a software update however, it is unable to complete the update. Could this be because my counter was tripped? or could I be missing something that I should have flashed along with the stock firmware?
GreatGrizzwald said:
If I can ask one more question, the phone keeps trying to download and install a software update however, it is unable to complete the update. Could this be because my counter was tripped? or could I be missing something that I should have flashed along with the stock firmware?
Click to expand...
Click to collapse
There are a few reasons it won't flash. If it still says custom in download mode, for instance, from when your dad tried to root it. You can check in your about phone section to see if it says modified or official. It should say official there but when you're in download mode it will tell you your status:custom.
Something like
Model : SGH-i317
Binary count:
Firmware: Samsung official
Status: Custom (it should say official to receive OTA)
Knox warranty bit: 0x1 (from where your dad tried to root)
^Either of those last two can prevent an OTA from completing. The update checks for certain things and then continues or rejects based on those checks.
Also (and this shouldn't apply to you) if you have a custom recovery installed or you've rooted and removed pre-installed apps, it won't flash. Check those things and your OTA should work. If it still doesn't, you can download the ne5 firmware I linked you to before. That's official 4.4.2 firmware and it will update you to the latest via Odin if you can't take the OTA for whatever reason.
The firmware you flashed should have taken everything back to stock for you, but it wouldn't really reset the Knox counter & custom status... and that very well could would an OTA. It seems it does anyway, so just update yourself with Odin.
Lastly, if you really want to reset completely, and be able to OTA, you can do that downgrade method I linked before to completely reset your phone and allow you receive OTAs again. (It would take you ALL the way back to 4.1.2 and you would OTA back to 4.3-4.4.2. Personally, I wouldn't do all that unless I planned to sell it, because the firmwares that are released for OTAs are usually available on here to flash with Odin within a day of release, so you'll always be able to have the latest firmware regardless.
Hope that helps you didn't miss anything, it's just the nature of the OTA.
---------- Post added at 09:08 PM ---------- Previous post was at 09:02 PM ----------
Edited to add, you can also go about it another way: root it and use triangle away to reset your custom status & flash counter and then reflash the same firmware you did yesterday. Then you should be able to OTA. (Although I'm not 100% on whether or not the Knox counter will interfere with the OTA update, I think it's just the flash counter that trips it).
And if you want the OTA notice to stop completely, you can root it and turn off the notifications entirely. I wasn't sure on whether you wanted to take the update or not... if you do, I'd just update with the latest via Odin. It's the simplest way to update and you wouldn't have any issues or surprises that people tend to get with OTAs.
absinthesummer said:
There are a few reasons it won't flash. If it still says custom in download mode, for instance, from when your dad tried to root it. You can check in your about phone section to see if it says modified or official. It should say official there but when you're in download mode it will tell you your status:custom.
Something like
Model : SGH-i317
Binary count:
Firmware: Samsung official
Status: Custom (it should say official to receive OTA)
Knox warranty bit: 0x1 (from where your dad tried to root)
^Either of those last two can prevent an OTA from completing. The update checks for certain things and then continues or rejects based on those checks.
Also (and this shouldn't apply to you) if you have a custom recovery installed or you've rooted and removed pre-installed apps, it won't flash. Check those things and your OTA should work. If it still doesn't, you can download the ne5 firmware I linked you to before. That's official 4.4.2 firmware and it will update you to the latest via Odin if you can't take the OTA for whatever reason.
The firmware you flashed should have taken everything back to stock for you, but it wouldn't really reset the Knox counter & custom status... and that very well could would an OTA. It seems it does anyway, so just update yourself with Odin.
Lastly, if you really want to reset completely, and be able to OTA, you can do that downgrade method I linked before to completely reset your phone and allow you receive OTAs again. (It would take you ALL the way back to 4.1.2 and you would OTA back to 4.3-4.4.2. Personally, I wouldn't do all that unless I planned to sell it, because the firmwares that are released for OTAs are usually available on here to flash with Odin within a day of release, so you'll always be able to have the latest firmware regardless.
Hope that helps you didn't miss anything, it's just the nature of the OTA.
---------- Post added at 09:08 PM ---------- Previous post was at 09:02 PM ----------
Edited to add, you can also go about it another way: root it and use triangle away to reset your custom status & flash counter and then reflash the same firmware you did yesterday. Then you should be able to OTA. (Although I'm not 100% on whether or not the Knox counter will interfere with the OTA update, I think it's just the flash counter that trips it).
And if you want the OTA notice to stop completely, you can root it and turn off the notifications entirely. I wasn't sure on whether you wanted to take the update or not... if you do, I'd just update with the latest via Odin. It's the simplest way to update and you wouldn't have any issues or surprises that people tend to get with OTAs.
Click to expand...
Click to collapse
Awesome, that makes a lot more sense now. Thanks again.
Hey I forgot you don't have custom recovery. Anyway, I sent you PMs,and you can do a search of this very forum- use the search term "update" or "ota" and you will find a LOT of threads on boot failures after OTA. Most people got their phones back.
If you can't get into DL mode (Vol-, Home, Power), try getting into the stock recovery (Vol+, Home, Power) because you should/could be able to factory reset the device from there. Also hold the button combo longer than usual. If one recovery option (DL mode) isn't working, than theoretically the other should still be accessible, through which you can adb sideload to the device or try factory reset. I know it's frustrating, but you're not the first nor the last to have an OTA go wrong ;/ We'll get ya back up & running.
You're not the only one in trouble after that update: http://forum.xda-developers.com/galaxy-note-2-att/help/todays-update-soft-bricked-phone-t2939649
Hi guys, I'll admit I'm a noob, but I'm trying my best to understand the ins and outs of flashing ROMs. I recently purchased a used S4 SGH-M919. The problem is the phone has i337 AT&T firmware on it. (I'm pretty sure it's a stock ROM and not rooted). I need to find a way to use the Tmobile network on this phone, so I have been trying revert to stock by flashing the stock M919 ROM on the phone using odin. Odin repeatedly fails before the flash begins. Odin dislays "FAIL! (Auth)" and the phone displays message "SECURE CHECK FAILED : aboot". I have tried several different .tar.md5 firmware files from sammobile. I have tried several USB cables and every USB port on my PC. The phone isn't quite bricked, it still boots fine it's just the network unusable with my t-mobile sim and the at&t firmware.
Do I need to wipe the phone and do a kernel flash? I'm lost and any advice would be appreciated
Thanks in advance,
Ryan
pull out the battery and MAKE SURE the PHYSICAL sticker behind the battery says model SGH-M919 (not SGH-M919V) but exacly SGH-M919.
if that has been confirmed then download the ODIN image from sammobile
Download the latest M919UVUFOH3
install via odin using the PDA or AP slot depending what version of odin u have it will say PDA or AP.
btw: you are getting SECURE CHECK FAILED : aboot". error because you are either flashing wrong image or too old of a image and the boot wont allow it.
are you sure that it is not a stock I337 ? If it is, it would be much easier to just obtain the SIM unlock code to use it with T-Mobile, I337s are really difficult to root and the sim unlock code is free and takes less than 5 minutes on the at&t website
XeoNoX said:
pull out the battery and MAKE SURE the PHYSICAL sticker behind the battery says model SGH-M919 (not SGH-M919V) but exacly SGH-M919.
if that has been confirmed then download the ODIN image from sammobile
Download the latest M919UVUFOH3
install via odin using the PDA or AP slot depending what version of odin u have it will say PDA or AP.
btw: you are getting SECURE CHECK FAILED : aboot". error because you are either flashing wrong image or too old of a image and the boot wont allow it.
Click to expand...
Click to collapse
c_irie said:
are you sure that it is not a stock I337 ? If it is, it would be much easier to just obtain the SIM unlock code to use it with T-Mobile, I337s are really difficult to root and the sim unlock code is free and takes less than 5 minutes on the at&t website
Click to expand...
Click to collapse
Thanks for the replies fellas. I am sure it's a stock SGH-M919. The sticker beneath the battery says so. I've already tried using the most recent firmware from sammobile (ending with OH3) with odin and I receive the same error no matter what. I've even tried multiple versions of odin and have used PDA or AP accordingly.
c_irie, It's not a stock i337, I've read about the bootloader issues and Loki regarding that model. I would really prefer to do a clean M919 flash, but do you think I could use a sim unlock code from at&t with my current situation?
This may not be useful information, but here's exactly what is displayed at the top of the screen when I boot into download mode:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD : ENABLE
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
rkham said:
This may not be useful information, but here's exactly what is displayed at the top of the screen when I boot into download mode:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD : ENABLE
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
Click to expand...
Click to collapse
seems like someone sold you a "hybrid S4" the casing with sticker of the m919 but the "motherboard" of a I337...
was probably a "fixer upper" normally from those shady mom and pop cell shops/ebay/craigslist. consider that you got yourself a sgh-i337 even tho the outside doesnt say so...the board inside matches that of a i337 i will gaurentee u.
XeoNoX said:
seems like someone sold you a "hybrid S4" the casing with sticker of the m919 but the "motherboard" of a I337...
was probably a "fixer upper" normally from those shady mom and pop cell shops/ebay/craigslist. consider that you got yourself a sgh-i337 even tho the outside doesnt say so...the board inside matches that of a i337 i will gaurentee u.
Click to expand...
Click to collapse
Thank you for opening up a new realm of possibilities for me. I hadn't thought of that. Why would someone re-brand a i337? Do you think odin is failing because I have the wrong image for a i337?
Problem solved for now. I went ahead and assumed that it's actually an i337. I followed the suggestion above and requested an unlock code from at&t using the imei found in settings. I didn't think it would work, i figured the phone was stolen, but the code from at&t worked and I can use the t mobile network! thanks guys. I'm kind of bummed that it's an i337 since it will be difficult to root if i ever go down that path.
glad we where able to help you out. Sorry to hear that someone kinda scammed you and sold you the wrong phone. To be honest with you tmobile phones have a slightly higher resale value too...i hope you didnt pay the extra premium..esp since it was a fixer upper phone. well anyways glad you got it all figured out. btw: the att s4 on tmo is missing a band but you can possibly unlock it to have all the tmo bands.
http://forum.xda-developers.com/showthread.php?t=2291589
Yeah it's definitely not the device I was hoping to receive. I've discovered a few issues. I haven't been able to use internet at all without wi-fi, and the mic doesn't work in calls for some reason so I use speaker phone. Other than that, it seems to be working very well.
rkham said:
Yeah it's definitely not the device I was hoping to receive. I've discovered a few issues. I haven't been able to use internet at all without wi-fi, and the mic doesn't work in calls for some reason so I use speaker phone. Other than that, it seems to be working very well.
Click to expand...
Click to collapse
if you have used a factory ODIN image and flashed it and you have all those problems then im sorry to say it was probably a "fixer upper" phone that wasnt fixed properly. sorry to hear you are having all those problems...that sux. i always thoroughly test new phones IN PERSON before i buy them. i do the sim card test, screen color test, mic test, speaker test, model number test. and a voice and data and wifi test.
installing tmobile on att version
f irst of all you have to have root second you need to install a custom recovery such as TWRP. then you need to download the Wicked V.10 zip.then boot into recovery mode white data cache partition and dalvik cache partition.actually install the zip file you downloaded for the wicked v10 Rom. But make sure download the tmobile version because it willautomatically change your CSC settings
maybes this will help
Ok first things first. You have to be rooted and already have a custom recovery installed like TWRP or CWM. If u aren't rooted then try the king root apk. Once u have root access then you can go to download mode on your phone. Most of the Phones the power button & volume down at the same time will take you to download mode you have to search on Xda for the custom recovery version that is for your phone model it also has to be the Odin compatible ".tar" file. I use Odin 3.9 just because it seems to work better but after u have everything I've listed the install Odin 3.9 on your computer. Once that is done u have to remember where the custom recovery u should have already downloaded is located. Right click on the odin icon and click run as administrator make sure that you click on the BL button because that is where you will place the custom recovery.tar file. when you click on the BL button it will open up a window where you can search for the custom recovery that you downloaded earlier once you find it click on it and it will automatically go to the BL box then you click Start and just let Odin finish doing what it has to do when it says complete unplug your cable from the computer out phone reboot your phone hold volume up that should take you to your custom recovery once you have your custom recovery installed you can backup your whole system install zip files custom roms. things of that nature I hope this helps feel free to msg me if u have problems
Hi. A few months ago I received a phone for my daughter from my mom. I reset the phone back to factory settings and it's working fine. I had to reset it back to factory again after locking myself out recently but other than that there hasn't been any issues until now. I picked up an activity tracker for my daughter recently and it wasn't connecting to the phone like it should even though it was listed as a compatible device.
Turns out the phone is at Android 4.1.1 and when I try to update it OTA it says there are no updates to download. So I tried updating through Kies and it isn't connecting the phone. At this time I started to do some more research.
The knox counter is at 2 and the device status is modified, which I have never rooted the phone and my mother can't even set up her wifi printer and most certainly can't root a phone. I installed triangle away but the phone needs to be rooted in order to do it's magic.
Do I need to root the phone in order to get the knox counter back to 0? Will this put the phone back where I can get android updates for it? I don't know where to start.
Boot into download mode. Do you see anything about warranty bit? If you do, the updates are working because it sounds like the phone has a stock 4.1.1 rom on a 4.3 or newer bootloader.
sarie15 said:
Hi. A few months ago I received a phone for my daughter from my mom. I reset the phone back to factory settings and it's working fine. I had to reset it back to factory again after locking myself out recently but other than that there hasn't been any issues until now. I picked up an activity tracker for my daughter recently and it wasn't connecting to the phone like it should even though it was listed as a compatible device.
Turns out the phone is at Android 4.1.1 and when I try to update it OTA it says there are no updates to download. So I tried updating through Kies and it isn't connecting the phone. At this time I started to do some more research.
The knox counter is at 2 and the device status is modified, which I have never rooted the phone and my mother can't even set up her wifi printer and most certainly can't root a phone. I installed triangle away but the phone needs to be rooted in order to do it's magic.
Do I need to root the phone in order to get the knox counter back to 0? Will this put the phone back where I can get android updates for it? I don't know where to start.
Click to expand...
Click to collapse
If you would to reset the knox counter to 0x0... yes, you have firstly to root your phone, then install triangle away.
delete
Knox cannot be reset to 0x0 once it has been changed to 0x1.
Since the word "modified" appears in download mode, this leads me to conclude that the phone may be rooted and cannot receive ota updates.
It is strange that the phone is running 4.1.1 with Knox as Knox was not introduced until 4.3.
Before flashing anything, you need to confirm the phone's current bootloader and modem.
audit13 said:
Knox cannot be reset to 0x0 once it has been changed to 0x1.
Since the word "modified" appears in download mode, this leads me to conclude that the phone may be rooted and cannot receive ota updates.
It is strange that the phone is running 4.1.1 with Knox as Knox was not introduced until 4.3.
Before flashing anything, you need to confirm the phone's current bootloader and modem.
Click to expand...
Click to collapse
How do I confirm the bootloader and modem? I literally am learning all the language and how all of this works as I go. All I know is I have a phone that is running 4.1.1 and won't update and when I went to the download odis (I think that's what it is called) said it was tripped 2 times where I was supposed to read the knox number.
I ran to the mobile store it's connected to and they said the T Mobile Galaxy S3 phone that I-Wireless puts out was never given an update past 4.1.1 Not sure how true that is. If that's the case, I probably need to root the phone anyway to force an update (Is that what I would need to do to get it at least to 4.3?
there is an app in the playstore called samsung info. download it and it should tell you bootloader and modem.
pretty sure it is true that 4.1.1 was the last.
heres the link to the xda thread , which of course will lead you to the playstore ; but will tell more detail about the app :
http://forum.xda-developers.com/showthread.php?t=2609045
[tp_noparse]W2NlbnRlcl1baW1nXWH0dHBzOi8vZGwuZHJvcGJveHVzZXJjb25OZW50LmNvbS91LzlzNjl3OTl3L0ltYWdlcy9TaWduYXR1cmVzL3ZhcmlvdXMvcmRiLmdpZlsvaW1nXVsvY2VudGVyXQ==[/tp_noparse]
Bootlegger version: T999UVDLJA
Modem Board: MSM8260A
Some other info that might help
Root Existence: No
Latest Firmware: Not Found
Knox Warranty Void: Warranty bit not found
Try flashing the stock lja firmware from here: http://www.sammobile.com/firmwares/database/SGH-T999/
way way off topic. @audit13 , is your avatar your cat & is its name audit13.
[tp_noparse]W2NlbnRlcl1baW1nXWH0dHBzOi8vZGwuZHJvcGJveHVzZXJjb25OZW50LmNvbS91LzlzNjl3OTl3L0ltYWdlcy9TaWduYXR1cmVzL3ZhcmlvdXMvcmRiLmdpZlsvaW1nXVsvY2VudGVyXQ==[/tp_noparse]
Avatar is a cat named Arthur.
I've never flashed something. Sorry if I ask a hundred questions as I go through this.
So you want me to flash the 4.1.1 that's already on the phone? Is that correct? Can I ask why? (I'm just wanting to know the meaning behind the action so understand what your thought process is so I can understand for next time.)
Just follow the directions underneath?
Is this what we're doing?
[GUIDE] How-To Completely Unroot Your Galaxy SIII |Zero Flash Counter|"Normal" Status http://forum.xda-developers.com/showthread.php?t=2136921
if i'm guessing right about what @audit13 & @ arthur (lol) are asking you to do is flash that firmware since the samsung info app said "firmware not found".
you might be confusing firmware version with android version. you say your on 4.1.1 which is the android version.
also if i'm not mistaken that firmware will match your bootloader which is a good thing.
[tp_noparse]W2NlbnRlcl1baW1nXWH0dHBzOi8vZGwuZHJvcGJveHVzZXJjb25OZW50LmNvbS91LzlzNjl3OTl3L0ltYWdlcy9TaWduYXR1cmVzL3ZhcmlvdXMvcmRiLmdpZlsvaW1nXVsvY2VudGVyXQ==[/tp_noparse]
Ah! That makes sense. In the process of it now. We'll see what happens and if I'm successful with it.
Success. It has auto updated to Android 4.3 after this. Thanks for your help.
good to hear.
that @ arthur (a.k.a. @audit13) knows his androids/tech/uhh...stuff.:good:
[tp_noparse]W2NlbnRlcl1baW1nXWH0dHBzOi8vZGwuZHJvcGJveHVzZXJjb25OZW50LmNvbS91LzlzNjl3OTl3L0ltYWdlcy9TaWduYXR1cmVzL3ZhcmlvdXMvcmRiLmdpZlsvaW1nXVsvY2VudGVyXQ==[/tp_noparse]