Hello, here is my problem I have tried to do a system restore but my g pro software lg flashtools is crached, So the phone will not turn on and not want to get to recovery mode and mode download the windows detected as the
QHUSB_Dload
My phone LG European version E986
Thanks help me
Related
My LG F240K stuck on LG Logo. Now i am unable to even charge my cell. When i tried to flash .kdz file through LG Flash Tool it says Battery level is low. hard Reset also not working for me. i can only go to download mod now or on LG logo.. Please some body help me to get out of this problem. thanks
Dear All,
May I ask a help for my G Pad.
After flash the rom , my g pad stay in LG logo,
I tried using download mode , In PC the LG mobile tools show "Waiting connection" but the firmware version can show "10018A upgradable".
When I click option --> upgrade recovery in LG mobile tools , its pop up a Model and SN, even I entered ,it also cant do a recovery.
Confirmed that I have install LG G pad driver in windows.
Also I tried a factory reset , after reboot also stay in LG logo.
Could all the xda gay can advise what can I do ?
Many Many hanks for all of great help.
jacky169 said:
Dear All,
May I ask a help for my G Pad.
After flash the rom , my g pad stay in LG logo,
I tried using download mode , In PC the LG mobile tools show "Waiting connection" but the firmware version can show "10018A upgradable".
When I click option --> upgrade recovery in LG mobile tools , its pop up a Model and SN, even I entered ,it also cant do a recovery.
Confirmed that I have install LG G pad driver in windows.
Also I tried a factory reset , after reboot also stay in LG logo.
Could all the xda gay can advise what can I do ?
Many Many hanks for all of great help.
Click to expand...
Click to collapse
Are you sure you're in download mode when you run LG mobile support tool? I was in a similar situation last week and it worked flawlessly for me. Follow these steps to get into download mode:
With Device Powered Off And Unplugged
Press and hold Volume Up + Volume Down --> this gets you in download mode
Now Plug In USB Cable --> after this, LG tool should recognize your pad
HI , first post , so here goes....have an old optimus g which i tried putting recovery on it....when phone rebooted , it had the secure booting error on it ....i went to the xda unbricking guide and have been stopped by the fact that the lg mobile support tool does not see my phone , and after i have downloaded and installed the drivers for my phone the lg optimus e973 .....
Verify that your phone is recognized and connected by checking the LG Mobile Support Tool. The text "Waiting for connection...." should be replaced by your model version LGE975 LGE970 or similar
..........i think i put the right drivers because i looked for them under the driver options for my phone ...but it still will not recognize my phone ...thanks for the help ...if any....have a great day.:cyclops:
zeus11111zeus said:
HI , first post , so here goes....have an old optimus g which i tried putting recovery on it....when phone rebooted , it had the secure booting error on it ....i went to the xda unbricking guide and have been stopped by the fact that the lg mobile support tool does not see my phone , and after i have downloaded and installed the drivers for my phone the lg optimus e973 .....
Verify that your phone is recognized and connected by checking the LG Mobile Support Tool. The text "Waiting for connection...." should be replaced by your model version LGE975 LGE970 or similar
..........i think i put the right drivers because i looked for them under the driver options for my phone ...but it still will not recognize my phone ...thanks for the help ...if any....have a great day.:cyclops:
Click to expand...
Click to collapse
reinstall the drivers.. or install the usb drivers using support tool...
Hello,
I have a lg g pad 8.3. Today I've tried to do the downgrade Lollipop -> Kitkat, but something wrong and I have the boot logo restart. But I've put my G PAD in download mode and now I'm trying to install various version of stock version through LG Flash Tool. But on my Windows 10, I receive the error "LGUserCSTool LG Mobile has stopped working........", while on my Windows XP pc, the .kdz of the version 30a.kdz stop the installation at the 95% and the LGMobile Support Tool tell me to retry the installation, while with the version 10b.kdz, finish at the 45%.
What I have to do now?
I see only DOWNLOAD MODE on my tablet, If I shutdown the tablet, reappears the Download Mode, no LG Logo.
Sorry for my bad english.
I followed this guide but used the 10b.kdz instead of 30a
http://forum.xda-developers.com/lg-g-pad-83/general/tutorial-korea-v30a-how-to-flash-t3076576
I noted that using 3GQCT worked fine (but required a hard reset)
CDMA caused "LGUserCSTool LG Mobile has stopped working"
Hello Everyone,
i need help reviving my lg g4 and i search all the forms but no avail. I just got a G4 4 days ago only it was running lollipop and working fine i just check for the MM update in phone but there was no update so as i previously own a lg g4 with flumics rom so i decided to flash a kdz with MM update. I see my model no. as h815 so i download H81520h_00_0516.kdz and flashed it through lg flash tool 2014 it flashed without no error but after the flash i got no display in phone just blue led flashes and i hear lg boot sound and then just nothing on phone display it switched off itself. I try to go into hard reset but again no display i try to go into download mode again no display. I attached it to pc it shows LGE Mobile USB Composite Device. Although it shows in lgup tool as H815 and port no. as well.I search my model no. through IMEI i found that it is actually F500L model as i see Korean as it flashed 1st time in download mode. After some research i manage to go into download mode by removing the battery and attaching the phone to pc as it shows empty battery icon so i inserted the battery by pressing the vol up button it goes into download mode. So i try to flash the right firmware which is F500L20u_00_0504.kdz bhut lgup says it invalid kdz i try to flash it through lg flashtool2014 but it says cannot connect to server and failed with contact system administrator. Although it flashes H815_EU_10C_00.kdz and India H818N10d_00.kdz firmware's but those give no display at all i tried it with Lg Bridge as it shows update avalable F500l and it download it but failed to flash it. I try flashing korean tot file LGF500LAT-00-V11d-LGU-KR-SEP-21-2015+0.tot through lgup tool but again it said invalid tot file So friends i am stuck and looking for 5 days to find any solution So anyone can please help me i just used it for 1 day . So can anyone help me.
You have to edit a F500L kdz with a hex editor and replace every F500L to H815 or something that flashes without error
First, if it's H815, you're to flash an H815 kdz with LG up
http://storagecow.eu/index.php?dir=Xda/LG+G4/H815/
Put into download mode and refurbish the kdz accordingly.