Develop Bugs

Fashed New Caulkins 2.0, and now phone won't boot

So, I flashed Caulks new EK02 Rom, and, when I went to restart, phone is stuck on boot screen; Wiped everything as normal before flashing, but stuck on the yellow triangle screen.
I tried all the normal stuff to get into recovery, but phone won't go past the initial boot screen.
I have a mac computer, and thats all there are in the house, so I can't use Odin..
Can someone help me get the phone back to a state where it starts up?
Thanks so much for your help!

Use heimdall.
Sent from the future.

did that, flashed to stock, and we are back in business!
I did think about the hammer though...
MOD, please close!

HELP!!! SGS2 root fail, now stuck

i just got this phone and tried to root it. i installed the kernal using oden and it went over without a hitch... but then after the phone turned off it got stuck at the boot screen with the yellow triangle and wouldnt go any further. after some time i unpluged it and turned it off and on. same thing happened. so i flashed the kernal again. this time when i turn it on it sais "firmware update encountered an issue- connect to keis in recovery mode.
i tried connecting to keis but it sais the device will not respond. i cant enter clockwork recovery mode cuz it just goes to the same error screen. i can only get into oden mode. i have a i9100 mugkg2 on tellus. nothing is working. i also tried using oden to install the stock rom but it fails every time. please help! how can i just get it back to factory

It sounds like you've bricked your phone, have you tried a USB jig to try and reset it yet? Try ebay, look for i9100 usb jig

teck2100 said:
i just got this phone and tried to root it. i installed the kernal using oden and it went over without a hitch... but then after the phone turned off it got stuck at the boot screen with the yellow triangle and wouldnt go any further. after some time i unpluged it and turned it off and on. same thing happened. so i flashed the kernal again. this time when i turn it on it sais "firmware update encountered an issue- connect to keis in recovery mode.
i tried connecting to keis but it sais the device will not respond. i cant enter clockwork recovery mode cuz it just goes to the same error screen. i can only get into oden mode. i have a i9100 mugkg2 on tellus. nothing is working. i also tried using oden to install the stock rom but it fails every time. please help! how can i just get it back to factory
Click to expand...
Click to collapse
Install KIES, then use the Unlock Root

teck2100 said:
i just got this phone and tried to root it. i installed the kernal using oden and it went over without a hitch... but then after the phone turned off it got stuck at the boot screen with the yellow triangle and wouldnt go any further. after some time i unpluged it and turned it off and on. same thing happened. so i flashed the kernal again. this time when i turn it on it sais "firmware update encountered an issue- connect to keis in recovery mode.
i tried connecting to keis but it sais the device will not respond. i cant enter clockwork recovery mode cuz it just goes to the same error screen. i can only get into oden mode. i have a i9100 mugkg2 on tellus. nothing is working. i also tried using oden to install the stock rom but it fails every time. please help! how can i just get it back to factory
Click to expand...
Click to collapse
Hi teck2100,
If you can get into odin mode (aka download mode) then you're fine. You should be able to flash a stock rom using odin.
Look here for a list of roms: http://forum.xda-developers.com/showthread.php?t=1113928 and pick one that you can root using D00ml0rd's method (zergrush), it's the simplest way I've found for root and Mobile Odin is the best app for custom rom's in my opinion.
Good luck and if it helped please use thanks,
Stefan.

Won't boot or anything

Hey,
My sisters galaxy gio won't boot. whenever i try to turn it on, the only thing that happens is that the screens goes on for half a second and then off and back on again forever. I already tried to flash a stock froyo, eclair & gingerbread but nothing works.
I only can go in to download mode (sometimes whitout the pink screen). I can NOT go into RECOVERY mode in any way. I wasn't able to flash cwm through odin either. Changing USB ports and usb cables didn't help either.
I am using the odin (4.4.2).
Is there any way to force it into recovery mode?
Thanks in advance

fluxerik said:
Hey,
My sisters galaxy gio won't boot. whenever i try to turn it on, the only thing that happens is that the screens goes on for half a second and then off and back on again forever. I already tried to flash a stock froyo, eclair & gingerbread but nothing works.
I only can go in to download mode (sometimes whitout the pink screen). I can NOT go into RECOVERY mode in any way. I wasn't able to flash cwm through odin either. Changing USB ports and usb cables didn't help either.
I am using the odin (4.4.2).
Is there any way to force it into recovery mode?
Thanks in advance
Click to expand...
Click to collapse
i had a similar problem about a month ago. i took it to my provider and they said that its power circuit was damaged due to liquids.
Do you get any errors with odin?

Locthe said:
i had a similar problem about a month ago. i took it to my provider and they said that its power circuit was damaged due to liquids.
Do you get any errors with odin?
Click to expand...
Click to collapse
Odin goes all well. It gets to the poiunt where it says "waiting for reboot" and that's when the phones screen starts flashing again.
I'm 100% it hasn't has anything to do with liquids, I think it began when changing the sd-card. But it was doing strange things before that.

Try this one
try this

Put your phone into recovery then do a factory reset and reboot your phone, it should work

[Q] [P5210] As soon as it boots to Stock Recovery, it Reboots!

I've got a Galaxy Tab P5210 that's stuck in a constant boot loop. I flashed it with the correct stock firmware from SamMobile using Odin, but it fails to boot properly. It automatically boots to the stock recovery screen, but the problem is it will instantly reboot as soon as it reaches this screen. I see the dead android with the red triangle and exclamation point for just a second, and it instantly reboots. Is that normal? I don't think that's normal. From what I've been reading, this screen is supposed to stay there until you push the volume keys to bring up a menu, but it reboots so fast that I don't have a chance to even push anything.
I've tried flashing it with other recovery images. I tried using CWM, and it almost worked. With that, as soon as the tablet booted, I'd see the CWM splash screen, and it would instantly reboot. Similarly to how it's booting now but with stock recovery.
I'd like to point out that I've never messed with anything like this before. I work in a computer/small electronic repair shop and a customer brought it to me. She ended up getting into stock recovery and a friend of hers did some serious damage in there which prevented it from booting properly. Normally we don't mess with things like this but, with it being how it was, I figured there was no way I could make it even worse than it already is by working on it. I thought if I flashed the original stock firmware back to it, it would fix it, but that looks like a no-go since it's still booting the same way it was when she first brought it to me.
Is this thing completely broken or is there still hope for it?

No - it should be recoverable. However - any data will most likely be lost.
When you flash with Odin, make sure only F. Reset Time is checked. Use Odin 3.07. Make sure again that firmware is correct before you flash. After it flashes, power off and then on again
Latest KK firmware for the US version of the 5210 is P5210UEU0CNK1_P5210XAR0CNK1_HOME.TAR
Good luck. If you're trying to root, then there are threads in the 10.1 Dev section that should help

M,
this firmware was always my goto for device recovery/restoration https://www.androidfilehost.com/?fid=23060877490005046
posted by user chpettit , flash with odin 3.07
m

OKAstro said:
No - it should be recoverable. However - any data will most likely be lost.
When you flash with Odin, make sure only F. Reset Time is checked. Use Odin 3.07. Make sure again that firmware is correct before you flash. After it flashes, power off and then on again
Latest KK firmware for the US version of the 5210 is P5210UEU0CNK1_P5210XAR0CNK1_HOME.TAR
Good luck. If you're trying to root, then there are threads in the 10.1 Dev section that should help
Click to expand...
Click to collapse
Not interested in rooting, just wanna get the stock firmware back on. Maintaining data isn't a necessity, the customer just wants it back in working order. I tried using that firmware, but I had Auto-Reboot checked.
EDIT
Yeah, it's still doing the same thing. When I first boot it up post-firmware flash I see an Android with a loading bar underneath it, and then it reboots. When it boots again, I see the same Android and then it suddenly changes to the dead one with the red triangle. Maybe I'm just doing something wrong here with the button presses following the flash?
EDIT2
It looks to me like the stock recovery image is just broken, since the tablet just automatically reboots the instant it attempts to load it up. Flashing a new firmware replaces that though, so I don't know how or why it would even be corrupted. Odin reports no errors, so I don't know what's going on. And every guide I'm reading with fixing bootloops all say "go into stock recovery and clear the cache", but I can't even boot into stock recovery. It's like it's not even there. And I know it's not a power button issue causing it to shut down, I can power the device off fully with it, and it will stay off until I press it again. I'm banging my head against the desk here.

What if you flashed a TWRP recovery in Odin. Then if that's successful, boot into recovery and wipe/format everything except ext SD, Then try the ODIN flash again with filr your stock tar

I'm having the same problem and that didn't work for me. It shows the twrp splash screen and reboots. I'm looking for the .pit file it has to be the recovery partition right?
Sent from my LG-D851 using Tapatalk

s3 t999l unable to flash any rom with twrp 3.1.1-0

I did a search and maybe not correctly but I did not find my particular problem.
So I have stock root66 rom flashed with odin 3.11 on my phone goes into boot loop.
I flashed twrp 3.1.1-0 with odin and I can go into recovery but as soon as I select any rom (OCT-N-WEEKLY-20170811-1427-d2tmo) it starts to do something and just reboots the phone and back into the boot loop. I reboots to fast for me to even figure out what it says on the phone.
Has anyone else experienced this? Battery is charged to 80%+
edit: tried CWM same symptoms reboots right away. Only thing I can flash with is odin otherwise with any recovery reboots right away. I was able to flash a modem with twrp and that works but no roms work.
update 2: I finally was able to get root66 installed. Gets to the set up part. Once I finish the setup the phone turned off on its own. It never turns on on its own so leads me to believe the power button isnot stuck but why does it turn off on its own? I turned back on and goes into bootloop.

The power button may be stuck in the "pressed" position.
Have you tried TWRP 2.87? You're sure you are flashing the correct TWRP version for the phone?

audit13 said:
The power button may be stuck in the "pressed" position.
Have you tried TWRP 2.87? You're sure you are flashing the correct TWRP version for the phone?
Click to expand...
Click to collapse
Thanks for the reply. I have tried 6.0.1.2_CWM_Touch-recovery-image & twrp-3.0.2-0-d2tmo.img but not 2.87.
However, as I stated above I was able to flash a modem but just not flash any roms which is weird.
If the power button pressed and the phone reboots when i pull the battery and put back in wouldn't the phone turn back on? I'm just finding it odd the phone keeps rebooting but when I pull the battery and put back in it doesnt turn on automatically.
update: So 2.8.6 twrp worked which is odd installing as we speak phone has not rebooted yet so lets see how it does once rom is flashed. I did odin root66 and after that installed it kept rebooting so fingers crossed this works. Using OCT-N-WEEKLY-20170811-1427-d2tmo hopefully this works

so after the flash seems to just back to the bootloop. I'm still not convinced my power button is stuck since it doesnt auto turn on and during the whole process of flashing it didnt reboot on its own only after the flash. Any ideas?
Literally gets to the samsung galaxy siii logo and reboots right away.

Try flashing the latest stock ROM, not a rooted stock ROM.

audit13 said:
Try flashing the latest stock ROM, not a rooted stock ROM.
Click to expand...
Click to collapse
same bootloop. Gets to the tmobile animation and then reboots.

It's possible that the memory chip is damaged. You could take it to a repair shop and have it flashed via jtag.