Related
I just got my Incipio Feather in the mail, and I must say I am very let down. When I looked at the picture on the website, I really thought that the case was going to wrap around the front but it does not. In all fairness, I did look at the picture again and it doesn't wrap around in it like I thought it did. The picture is very deceiving, the way they shade the Evo makes it look like the case wraps around, at least to me it does. Anyways...
The Incipio is a lot thicker than the Barely There, and doesn't come up as high on the sides either. That actually makes it feel rather awkward in the hand because there is a very pronounced lip around the whole phone. Also, the Incipio case has a full cutout, like a bite, from the front of the case for the volume rocker whereas the Barely There has a rectangular hole and covers the plastic in front of the rocker.
The Incipio also provides far less protection for the camera lens. With the Barely There, the lens is completely protected, it covers the edge of the glass, fully recessing the lens into the case. It has a separate cutout for the flash, lens, and speaker. The Incipio just has one gaping hole for all three to share.
My biggest complaint about the Incipio is that because it doesn't come up all the way around the sides, the face of the Evo sticks out from it and consequently the corners are not fully protected. If this thing takes a tumble on to concrete, there is a good chance your corner could still get scratched. With the Barely There case, while still not very protective, at least your corners won't get beat up.
The only positive about the Incipio is that I like the way the material feels better than the Barely There. It has a softer, almost velvety finish to it. The Barely There still has a nice rubberized texture to it, just not as nice as the Incipio's.
I see no reason at all to purchase the Incipio case when you can buy the Barely There case instead. The Barely There is thinner, feels more comfortable in the hand, and provides more coverage/protection. I am sticking with my Barely There case and will probably give the Incipio away.
Casemate Barely There
Incipio Feather
Both cases cost $19.99.
Thanks for the review ... appreciate it. Have you looked at the other Case Mate Evo case that is two part (Tough Case)? Just wondering about the protection and quality.
No I haven't, at least not in person. I'm sure it's a great case, and I know other people have had good experiences with it, but I personally don't like the way it looks compared to the OB Commuter case or the Seidio Active Limited, and I already have both of those.
_MetalHead_ said:
No I haven't, at least not in person. I'm sure it's a great case, and I know other people have had good experiences with it, but I personally don't like the way it looks compared to the OB Commuter case or the Seidio Active Limited, and I already have both of those.
Click to expand...
Click to collapse
Couple of quick questions for you ... since you have both. I had the Seidio Active Limited from Amazon, really liked the feel of it, but the plastic back began to peel off. I didn't replace it with another ... afraid the same thing would happen. Any issues for you? So I've been using the Otter Box Impact case, but since I keep my phone in my front pocket ... it can be a lint magnet. If you don't mind ... tell me about your experience with the Commuter case from OB. Thanks.
wmdunn said:
Couple of quick questions for you ... since you have both. I had the Seidio Active Limited from Amazon, really liked the feel of it, but the plastic back began to peel off. I didn't replace it with another ... afraid the same thing would happen. Any issues for you? So I've been using the Otter Box Impact case, but since I keep my phone in my front pocket ... it can be a lint magnet. If you don't mind ... tell me about your experience with the Commuter case from OB. Thanks.
Click to expand...
Click to collapse
I have the exact same issue as you with the Seidio. I have actually gone through 3 of them now, and they all started peeling within a week. The first one I had one of the tabs broke off while putting the case on. It's a shame that the build quality is so crappy on them because I really like the design, and I think it's a little more rugged than the OB Commuter. Not by much though, it just has thicker silicone.
My only complaint about the Commuter, and I know a lot of people share the same feeling, is that the cover for the charging and HDMI ports was poorly designed. It is a pain to get it closed, and it never stays in place for very long. Also, the way they cut the silicone for that cover, it is subject to tearing. Mine hasn't torn, and neither has my buddy's, but I know some people have had that issue. The good news is that Otterbox, unlike Seidio, has no problem whatsoever sending out a replacement case if by some chance that piece tears off, or any other defect for that matter. Overall I think it is a great case and I use it regularly, and even with the small issue of that cover, I can still recommend it to people.
Thank you ... I'm thinking about trying the "Barely There" since I'm an "in pocket" guy.
You can barely tell that there is a case on the phone with the Barely There, hence the name. If you're an in pocket guy, then that is definitely the case you want. I use it way more than all my other cases combined.
get the barely there case, i have it and love it, and as they say, its hardly noticable. plus case-mate came out with a full frontal screen cover, so you have case protection on back and sides and a full screen cover to cover the remaining parts
wmdunn said:
Thank you ... I'm thinking about trying the "Barely There" since I'm an "in pocket" guy.
Click to expand...
Click to collapse
You said my words exactly. I too am very let down with the Incipio Feather case. I also thought that it would at least have a lip that came over the front edge but nothing. I dropped my phone on the carpet(fortunately it was carpet) and it popped right out of the case. If you want protection I don't think this is the case to use. They could have done much better. I would have preferred one of the Incipio NGP cases to this thing.
I've been using the Barely There case for almost 2 months. I love the feel of it. The material holds well. The screen protector it came with is awesome. I hated the way stealthguards and invisible shield felt on the glass. The screen protector that the Barely There came with feels just like glass when it's on.
The only thing is that this case is just to protect against scratches and minor drops on carpet maybe. I dropped it once on concrete and the case flew off and I have a small dent on the top front corner of my Evo.
This is my experience exactly
dcfella said:
I've been using the Barely There case for almost 2 months. I love the feel of it. The material holds well. The screen protector it came with is awesome. I hated the way stealthguards and invisible shield felt on the glass. The screen protector that the Barely There came with feels just like glass when it's on.
The only thing is that this case is just to protect against scratches and minor drops on carpet maybe. I dropped it once on concrete and the case flew off and I have a small dent on the top front corner of my Evo.
Click to expand...
Click to collapse
I have the Seidio Rugged and it comes with the Innocase Surface as well and I really like the Surface, its not too thick and protects the camera lenses from scratches. I just need to get the belt clip for the Surface so outside of work I don't have all the bulk.
Sent from my PC36100 using XDA App
Get the Otterbox Impact. I love it. High quality silicone and nice thick screen protector.
Sent from my PC36100 using XDA App
Those aren't really barely there cases
xlGmanlx said:
Those aren't really barely there cases
Click to expand...
Click to collapse
Barely there cases are counter-intuitive. If you want to protect a case against impact should you drop it, the case needs to be heavy enough to absorb most of the impact itself and not the phone. These barely there cases may protect from scratches on the phone body but that's it. So I guess you can safely slide the phone around on your desk but don't drop it.
Sent from my PC36100 using XDA App
Case mate barely-there case on newegg for $9.99. I would post the link but I don't have 8 posts yet.
Not really applicable in a thin case review check op as the subject isn't the merits of thin cases versus other types
mitchellvii said:
Barely there cases are counter-intuitive. If you want to protect a case against impact should you drop it, the case needs to be heavy enough to absorb most of the impact itself and not the phone. These barely there cases may protect from scratches on the phone body but that's it. So I guess you can safely slide the phone around on your desk but don't drop it.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
the bottom flap on my commuter stays in place fine, also fits great in your pocket, unless your female and wear them skin tight the barely there doesn't have any lay on the table protection for the front glass, which is just too risky in my opinion.
Sent from my PC36100 using XDA App
Poetik said:
Case mate barely-there case on newegg for $9.99. I would post the link but I don't have 8 posts yet.
Click to expand...
Click to collapse
Thanks, just order it. I had the ID case for the iPhone from them and that thing took a beating and never gave up. Hope to expect the same from them again
I still think the Otterbox Commuter is the best case out there. It doesn't add that much bulk, feels sturdy and protects like none other. Well worth the money.
So I've got to give credit to the fine folks over at the Nexus S forum for giving inspiring the idea. I am a fan of keeping my phone caseless but I'm also a fan of keeping the scratches away. I bought a can of plasti dip in black and sprayed the back cover of the phone. The inside I sprayed 3 coats and the outside I believe 5. I held the can away from the cover about 15 inches while spraying for an even coat. Let it dry 30 mins between coats and sit 4-5 hours when I was finished just as the can said. It turned out great as you can see and now has a scratch proof rubberized cover. The rubber simply peels off if I ever want to remove it.
Looks good, not a bad idea at all. You say you sprayed the inside of the cover as well? Wouldn't think you would need to bother with the inside, why did you cover the inside. Take care.
smsparks said:
Looks good, not a bad idea at all. You say you sprayed the inside of the cover as well? Wouldn't think you would need to bother with the inside, why did you cover the inside. Take care.
Click to expand...
Click to collapse
I sprayed the inside as well so it wouldn't start to peel on the edges. It fits just as snug as it did before despite being sprayed inside too. =) I did cover the hole for the speaker before spraying
How well does it slide in and out of your pocket? Is there any spray that would be more of a soft-touch rubber feel?
icedwhiskey said:
How well does it slide in and out of your pocket? Is there any spray that would be more of a soft-touch rubber feel?
Click to expand...
Click to collapse
It slides in and out just fine. It's just grippy enough to not slide around on my seat as I'm driving. The best thing is if it gets annoying or I want to change it the stuff just simply peels off
i've used plastidip plenty of times on things, and i dont know about the durability of that over time. I use it on emblems on cars to black them out and stuff and small rock chips etc pull it off fairly easily. Plus the finish usually isnt too smooth. i'd rather spend 20 and get the feather case....i can peel that off too
seriouslyjeff said:
I am a fan of keeping my phone caseless but I'm also a fan of keeping the scratches away.
Click to expand...
Click to collapse
How do you plan to keep that arpo over 70 if you don't sell any cases? lol.
link12245 said:
How do you plan to keep that arpo over 70 if you don't sell any cases? lol.
Click to expand...
Click to collapse
Lmao! If we had more than zero cases in the store I would sell em! I take it you work for att too?
poor phone looks like my grandpa's truck bed now.
falconeight said:
poor phone looks like my grandpa's truck bed now.
Click to expand...
Click to collapse
Too bad it can't haul
case companies need to stop making ugly ass cases and make some back cover replacements.
First one to make a soft-touch back cover with kick stands wins my money
Very cool idea! I decided just to wet sand the back cover to keep it looking like carbon fiber AND to make it a little easier to grip on to - pics are in the link on my signature.
I don't know if I agree with spraying the inside too just to get the edges uniform.... spraying the inside (and, well, the outside too I guess) will help trap in heat, something you don't want when charging a phone with a dead battery because this thing gets HOT as it is!
Also, I don't know if I would advertise the ability to simply peel the rubberized coating right off if you want to remove it. I've used this stuff dozens of times, I actually have my race car's tow hook covered in it, and that thing sees a LOT of abuse, but doesn't come right off.... If you can use this stuff to protect against giant metal hooks scratching off the coating with exactly as many dips in the can as you have layers of spray, I doubt this stuff would come off completely without a fight!
seriouslyjeff said:
Lmao! If we had more than zero cases in the store I would sell em! I take it you work for att too?
Click to expand...
Click to collapse
Yes sir. We also have no cases, no accessories, but do have a few of the phones left.
GarciaM25 said:
Very cool idea! I decided just to wet sand the back cover to keep it looking like carbon fiber AND to make it a little easier to grip on to - pics are in the link on my signature.
I don't know if I agree with spraying the inside too just to get the edges uniform.... spraying the inside (and, well, the outside too I guess) will help trap in heat, something you don't want when charging a phone with a dead battery because this thing gets HOT as it is!
Also, I don't know if I would advertise the ability to simply peel the rubberized coating right off if you want to remove it. I've used this stuff dozens of times, I actually have my race car's tow hook covered in it, and that thing sees a LOT of abuse, but doesn't come right off.... If you can use this stuff to protect against giant metal hooks scratching off the coating with exactly as many dips in the can as you have layers of spray, I doubt this stuff would come off completely without a fight!
Click to expand...
Click to collapse
I don't know about it overheating at all although I haven't noticed any problems. As far as it peeling off it peels off without a hitch.. almost too easy, I am going to sand the back of the case in hopes that it will stick a little better. I assume the glossy cover makes it easy to peel but I've peeled it off and sprayed it again already once.
andy2na said:
case companies need to stop making ugly ass cases and make some back cover replacements.
First one to make a soft-touch back cover with kick stands wins my money
Click to expand...
Click to collapse
Dude yes I am totally with you!
andy2na said:
case companies need to stop making ugly ass cases and make some back cover replacements.
First one to make a soft-touch back cover with kick stands wins my money
Click to expand...
Click to collapse
+2 !!!!!!!
How is it holding up, 2 weeks later?
Ah sorry for the late response. It was holing up pretty well. I peeled it off a few days ago due to it peeling.. I think I might lightly sand the back first this time
Sent from my Google Nexus S using XDA App
Good idea and all but why would you not buy a rubberized case instead (replaces battery door). I have seen a dozen shops selling them in the US but none that ship (or none afford-ably yet) to Australia.
mrinternet said:
Good idea and all but why would you not buy a rubberized case instead (replaces battery door). I have seen a dozen shops selling them in the US but none that ship (or none afford-ably yet) to Australia.[/QUOeditTE]
Oh because when I did it 6 weeks ago (right after release of the phone) there were none available
Edit: I misread. I don't like cases. They make the phone too bulky. I now use best skins ever. This peeled off after about a week each time I did it.
Click to expand...
Click to collapse
Do all silicon cases when you put it in your pocket the screen collects a lot more dust and lint around the phone where the case meets the bezel?
I got this case from Verizon wireless, i think it the high gloss one.
I love the case because it fits perfectly doesn't make the phone too big. While not sure how well it will protect if i drop it, the biggest plus is, it gives me a better grip and does not slide out of hand so i will not drop it.
Every time I pull the phone out of pocket has tons of dust and lint and so hard to clean without taking the case off.
So I am curious anyone have any recommendations for a similar silicon case that will not attract all that dust while in the pocket?
Thanks
I have the same case and don't really have an issue. Maybe you should put a canned air in your other pocket to blow it off each time you pull it out. ^_^
Sent from my Galaxy Nexus using xda premium
I have a S-line TPU case from ebay, I find a lot of dust and fluff sticking to the edges in my pocket, but it doesn't bother me, maybe I just have really dirty pockets!
Yeah, I get a lot of dust and lint in there too. I use the amzer case with the Verizon screen protectors.
Sent from my GSM Galaxy Nexus using Tapatalk
Interesting thing is if I go naked with nexus it does not attract much dust.
Something to do with the silicon.
Sent from my Galaxy Nexus using Tapatalk
Should avoid silicone cases. They are dust magnets and will start stretching soon. Tpu's are way better and cost the same.
Sent from my Nexus in Texas.
@rbiter said:
Should avoid silicone cases. They are dust magnets and will start stretching soon. Tpu's are way better and cost the same.
Sent from my Nexus in Texas.
Click to expand...
Click to collapse
Thanks any recommendation which one?
I never heard of TPU that is new to me. What does that stand for?
Maybe I will return this case since it was $24.99
TPU wikipedia link, fantastic material! Plenty of cases on eBay for only a few pounds!
@rbiter said:
Should avoid silicone cases.
Click to expand...
Click to collapse
Very much so. Silicone is always a lint magnet especially if you pocket your phone.
I got myself the Barely There Case in black by Case-Mate. Was about to get the Otterbox Commuter but was worried that it would make the phone too big to hold with one hand.
Thanks everyone I went for one of the TPU forgot name starts with a D, rev 3..for I think $10 off amazon.
Will return this one at verizon once I get it
I use the Verizon silicon case too and found the same issue. Thats why I empty out my jacket's pocket completely before putting my phone in.
All the Same
I find the TPU cases to be nearly as good at concentrating dust on screens as silicone. It seems more a function of the protective lip protruding around the edge of the screen than the material it's made of. A dirty phone is just the price one pays for trying to protect it.
Alright so I'm sure everyone who has the leather back and has not put a cover on it yet can see that the leather back is getting dirty.
It might be just me but i have the brown leather back. The stitches have gotten blackish and not white like they were in the beginning and the back just keeps getting a darker shade!
Any of you guys try to clean it? If so how'd you do it?
Is it okay to take the back off and clean it under water?
Or should i use windex.
I don't wanna ruin the leather attempting to clean it!
Areebkhan said:
Alright so I'm sure everyone who has the leather back and has not put a cover on it yet can see that the leather back is getting dirty.
It might be just me but i have the brown leather back. The stitches have gotten blackish and not white like they were in the beginning and the back just keeps getting a darker shade!
Any of you guys try to clean it? If so how'd you do it?
Is it okay to take the back off and clean it under water?
Or should i use windex.
I don't wanna ruin the leather attempting to clean it!
Click to expand...
Click to collapse
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
I bought a cheap bottle of leather treatment from CVS for about $6. You spray two coats on it, and you're good to go. It actually gave the leather a nice, grippy-er, feel. And it helps protect from wetness. After that, you should be able to use any type of leather cleaner to keep it looking fresh.
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
I bought a cheap bottle of leather treatment from CVS for about $6. You spray two coats on it, and you're good to go. It actually gave the leather a nice, grippy-er, feel. And it helps protect from wetness. After that, you should be able to use any type of leather cleaner to keep it looking fresh.
Click to expand...
Click to collapse
HAHAHA!!
THANK YOUU!
I knew it was good to ask before doing something!
So cleaning it with that leather treatment gives it the shine back aswell?
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
Click to expand...
Click to collapse
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
Click to expand...
Click to collapse
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
Click to expand...
Click to collapse
Quoted for emphasis. Definitely a very good thing that the OP asked.
I use Meguiar's Gold Class Rich Leather Aloe Cleaner followed by Meguiar's Gold Class Rich Leather Aloe Conditioner. Yes, I do my own auto detailing, and yes, I hate it when people use cleaners inappropriately and screw up whatever they were trying to clean. My parents are seriously guilty of that and it left me with cleaning-related faux-PTSD flashbacks decades later.
The G4's back wasn't shiny from the factory, but certain cleaners will produce a slight matte sheen on the leather.
Areebkhan said:
HAHAHA!!
THANK YOUU!
I knew it was good to ask before doing something!
So cleaning it with that leather treatment gives it the shine back aswell?
Click to expand...
Click to collapse
Yes, it will keep your leather back looking mostly new. Most importantly it will protect against getting wet, which will stain your leather.
Any kind of leather treatment that adds a "shine" is no good in my eyes. I have had a few european luxury cars and i can tell you this...best thing i have ever used to clean my seats and other areas has been...BABYWIPES!!
Seriously it does not take away from the natural state or satin look of the leather and actually clean it very well. If it good enough for your babys ass.....its good enough for the skin on your phone!
You dont have to take my word for it though.
BTW got it wet today. there was a slight dark spot for a fe minutes but went away fully
Snakecharmed said:
I use Meguiar's Gold Class Rich Leather Aloe Cleaner followed by Meguiar's Gold Class Rich Leather Aloe Conditioner. Yes, I do my own auto detailing, and yes, I hate it when people use cleaners inappropriately and screw up whatever they were trying to clean. My parents are seriously guilty of that and it left me with cleaning-related faux-PTSD flashbacks decades later.
The G4's back wasn't shiny from the factory, but certain cleaners will produce a slight matte sheen on the leather.
Click to expand...
Click to collapse
These kinds of products are unavailable outside the US so we need alternatives.
What do you make of the advice given in this video ?
House hold items available in any country.
white vinegar to clean
shaving foam to remove ink stains
corn starch to remove grease
From the user manual
This product is made of cattle hide and may have different creases and patterns due to the properties of natural leather. If the product gets wet with any liquid (water, soda, seawater, rain, sweat, sunscreen, cosmetics, moisture, etc.), it may lose colour, change colour, or deform in shape.
When this product gets wet or contaminated, get rid of the water by pressing it gently with a dry towel, or wipe it with leather cream and leave it to dry in shade. When the product is exposed to a wet environment for a long time, it may cause creases or mould. The shape of the leather may not be restored to its original state after cleaning because of the properties of leather, and any contamination or deformity may get worse when using regular detergent or an organic solvent.
When the leather is wet with rain or sweat, use caution and avoid contact with clothes. It can cause any dye to become a stain.
Due to the nature of leather, friction for long periods of time or excessive force may damage the surface of the leather.
Click to expand...
Click to collapse
This is an important thread or there's going to be a few unhappy people later on.
I used new baseball glove condtioner.
Sent from my VS986 using XDA Free mobile app
what i got is you need a cleaner and then a conditioner.
the cleaner to remove stains and a conditioner to maintain the material.
Mr clean magic eraser to clean it. That's what we use in the automotive detailing world
Sent from my LG-LS980 using Tapatalk
I don't know how I feel about the advice in the video. Those suggestions are very common, but I haven't tried them personally. People have conflicting things to say about the extreme acidity of vinegar against the mild acidity of leather, which is why you need to dilute the vinegar in the first place. One alternate suggestion I've read is to use Woolite 10:1 to 6:1 (water:Woolite). Another I've read is Dove soap. Don't use saddle soap, which has a pH level way too basic for leather cleaning.
What I can say is that you should use a soft terry or microfiber cloth to apply the cleaning solution, then wipe it off with a dry cloth. Don't apply a solution directly to the leather and don't apply too much at once. Even the moisture from a water-dampened cloth isn't the worst thing in the world if you're just quickly wiping on and off. Just don't soak the leather in anything, like running it under a stream of water. It's too porous to not absorb it. Once it's clean, condition it so you have some kind of protection from future stains.
As clichéd as this sounds, an ounce of prevention is worth a pound of cure. I'm not a super clean freak, but I try to keep my hands clean when I handle the G4. I don't touch the back of it while eating and I try to keep it away from beverages. However, I'm planning to get a plastic back for the G4 as my regular back cover and only use the leather occasionally.
Snakecharmed said:
I don't know how I feel about the advice in the video. Those suggestions are very common, but I haven't tried them personally. People have conflicting things to say about the extreme acidity of vinegar against the mild acidity of leather, which is why you need to dilute the vinegar in the first place. One alternate suggestion I've read is to use Woolite 10:1 to 6:1 (water:Woolite). Another I've read is Dove soap. Don't use saddle soap, which has a pH level way too basic for leather cleaning.
What I can say is that you should use a soft terry or microfiber cloth to apply the cleaning solution, then wipe it off with a dry cloth. Don't apply a solution directly to the leather and don't apply too much at once. Even the moisture from a water-dampened cloth isn't the worst thing in the world if you're just quickly wiping on and off. Just don't soak the leather in anything, like running it under a stream of water. It's too porous to not absorb it. Once it's clean, condition it so you have some kind of protection from future stains.
Click to expand...
Click to collapse
Thanks. Even with various leather cleaners around its a tricky affair to do it properly for the layperson. Not impossible. As long as one is aware.
As clichéd as this sounds, an ounce of prevention is worth a pound of cure. I'm not a super clean freak, but I try to keep my hands clean when I handle the G4. I don't touch the back of it while eating and I try to keep it away from beverages.
Click to expand...
Click to collapse
hehe, this advice will fall on deaf ears as its impossible to follow. Force of habit. it no secret that keyboards and touch screens contain more bacteria than toilet seats
However, I'm planning to get a plastic back for the G4 as my regular back cover and only use the leather occasionally.
Click to expand...
Click to collapse
Bingo! thats is the conclusion i'm reaching too. The idea of leather is fantastic but if you want to look good then be prepared to put in the work.
Leather is just not that practical for day to day in a phone usage scenario..
But it looks so good <sigh>
One of the things I've learned in both buffing/polishing and interior detailing is to not work too large of a surface area at once. You don't want to let a product set or dry before you can work on it. The product ends up being harder to remove and/or stains your surface.
When it comes to patina, the issue for me is that the leather surface is small, so any marks will be more visible. I look at my travel wallet, which I haven't used much, and I'm annoyed that there is wear on one of its corners and the color has rubbed off. I'm far less concerned about a scuff on the seat in my car. Still, I don't own any leather furniture because of the upkeep required.
There are photos one of the Android Central staff posted of a used brown leather Moto X. I don't think it looks bad, and if it came that way out of the box, I don't think anyone would have thought it was dirty. If you're like me though, you like keeping things looking like new. I'm getting better about conditioning or protecting new leather products before wearing them or breaking them in.
The black leather G4 cover would be much more forgiving with stains, but aside from lack of carrier availability, I only would have preferred that version if it had contrasting stitching.
Can someone point me in the right direction? I'm a complete noob at this and have no idea where to start. I was thinking of getting the leather honey conditioner from Amazon, but still wasn't sure if that would be appropriate. No clue where to begin on cleaners. I have the black leather back btw
xbayyx said:
Can someone point me in the right direction? I'm a complete noob at this and have no idea where to start. I was thinking of getting the leather honey conditioner from Amazon, but still wasn't sure if that would be appropriate. No clue where to begin on cleaners. I have the black leather back btw
Click to expand...
Click to collapse
I've had a bottle of Leather Honey since about 2000 (before they changed the name), and that's what I used on my leather back. It didn't darken the tan leather (unfortunately), though it did make it a bit sticky for a bit. If you go this route, apply it sparingly before going to bed.
Since this is a thread about cleaning, I feel obligated to mention that product is for protecting leather only, although I believe the same company makes a cleaning product as well.
My Pixel 6 Pro doesn't seem to do a good job with heat dissipation in Arizona heat while having bulky cases on. I need some good recommendations of thin yet protective cases to switch to. Also one with a kickstand if possible, but it's not a deal breaker. Thank you in advance and hope to hear from you guys soon to alleviate the overheating problems and I've been having.
The UK hit 40c (104f) yesterday and i have to admit my Spigen Tough Armor case isn't the best choice for such weather what with all its foam padding etc. so i am thinking the same thing, a less bulky case, so I'm all ears as well.
MrBelter said:
The UK hit 40c (104f) yesterday and i have to admit my Spigen Tough Armor case isn't the best choice for such weather what with all its foam padding etc. so i am thinking the same thing, a less bulky case, so I'm all ears as well.
Click to expand...
Click to collapse
104 is normal for where I live so I feel bad for you guys that aren't used to it. Hope you're gonna be ok though
Metalhead520 said:
104 is normal for where I live so I feel bad for you guys that aren't used to it. Hope you're gonna be ok though
Click to expand...
Click to collapse
It has dropped to a more normal for a UK summer 75f today much to everyone's relief.
Here's an idea for you;
I'm using a phone case that is made out of a combination of rubber and aluminum.
https://www.amazon.ca/gp/product/B09G1JW7TV
What you can probably do quite effectively, is cut out some of the rubber and replace it with a THERMAL PAD;
https://www.amazon.ca/gp/product/B00UYTTMNI
Aluminum is very conductive, so switching the material between the phone and the aluminum case to another conductive material should do a pretty good job of bringing that heat out to the case and allowing it to dissipate effectively rather than trapping it under a non-conductive rubber/tpu/whatever case.
And if you really want to get effective with the heat dissipation and don't use magnetic charging, then add a piece of copper foil over the back of the phone below the camera where you can't trim the rubber, especially over the charging coil.
Been using this since day 2...
No heating issues and provides sufficient protection and is much less likely to fall from my hands compared to caseless which is about as slippery as if it were made from ice!
https://www.amazon.com/TIMECAT-Lightweight-Carbon-Google-Protective/dp/B09L6F72W2/ref=sr_1_1?crid=2A3LBS6IAQU85&keywords=pixel+6+pro+aramid&qid=1658347262&sprefix=pixel+6+pro+aramid%2Caps%2C66&sr=8-1
What the Pixel 6 range needs is something like a Spigen Tough Armour with loads of holes / slots in the back of it so it offers protection and cooling.
cpufrost said:
Been using this since day 2...
No heating issues and provides sufficient protection and is much less likely to fall from my hands compared to caseless which is about as slippery as if it were made from ice!
https://www.amazon.com/TIMECAT-Lightweight-Carbon-Google-Protective/dp/B09L6F72W2/ref=sr_1_1?crid=2A3LBS6IAQU85&keywords=pixel+6+pro+aramid&qid=1658347262&sprefix=pixel+6+pro+aramid%2Caps%2C66&sr=8-1
Click to expand...
Click to collapse
That looks nice but might be slippery with my constantly dry hands lol
It actually is quite grippy compared to naked!
With nothing on it, this phone is downright SCARY to hold. All that glass feels very fragile, and way to small of bezels to get a proper grip on it without putting your fingers over the screen.
cpufrost said:
It actually is quite grippy compared to naked!
Click to expand...
Click to collapse
To be fair wet ice has more grip than the pixel 6 pro
Love this case on mine.
www.amazon.com/Spigen-Rugged-Armor-Designed-Google/dp/B0964G4TLW/ref=sr_1_2?crid=IF0CADTQM8NZ&keywords=pixel+6+pro+spigen&qid=1658480080&sprefix=pixel+6+pro+spigen%2Caps%2C486&sr=8-2
I use this case along with whitestone dome have it in black and red
I usually go with Spigen Liquid Air or Rugged Armor. Core Armor also seems to be a newcomer.
Pair with a Whitestone or other suitable tempered glass screen protector. I have never shattered a screen with the tempered glass and TPU case combo. I don't like hybrid or polycarbonate cases.
For people that need extreme performance or frequently drop their phones or throw them at walls, there's always the Otterbox Defender.
I'm a massive fan of Spigen cases but I got one of these by FTRONGRT mainly because of the camera bar protection, the fit is fine but I'd say the grip just isn't quite as good as a Spigen Rugged Armor. I'll just go back to my Spigen Tough Armor when autumn comes.
{Mod edit: Quoted post has been deleted}
Huh, sounds very familiar, right down to a spelling error.
96carboard said:
Here's an idea for you;
I'm using a phone case that is made out of a combination of rubber and aluminum.
https://www.amazon.ca/gp/product/B09G1JW7TV
What you can probably do quite effectively, is cut out some of the rubber and replace it with a THERMAL PAD;
https://www.amazon.ca/gp/product/B00UYTTMNI
Aluminum is very conductive, so switching the material between the phone and the aluminum case to another conductive material should do a pretty good job of bringing that heat out to the case and allowing it to dissipate effectively rather than trapping it under a non-conductive rubber/tpu/whatever case.
And if you really want to get effective with the heat dissipation and don't use magnetic charging, then add a piece of copper foil over the back of the phone below the camera where you can't trim the rubber, especially over the charging coil.
Click to expand...
Click to collapse
This actually sounds like a good idea. I might try this thermal pad thing out in the near future.