Root Required!!!!!!!!
Before Enabling Hidden Menus (Dialer) you will need a “File Manager/Explorer” that has Root Access, if you do not currently have one, follow my instructions below and I will provide you with one free of charge.
Root File Manager/Explorer
This app is called File Manager (Explorer) by Rhythm Software, click >>[HERE]<< to download once completed click open. Go into the “Settings”> go into the Set Home Directory and change the current path from: /storage/emulated/0 to / and hit the OK and it should display “/” in the Settings menu. Scroll down to Root Settings> Root Explorer and check the 1st box, Mount System Folders will become an option check this option as well, there should be 2 boxes checked total under Root Settings (Advanced Users). Congratulations, you have a FREE Root File Manager/Explorer.
It is also Recommended that you Backup your "EFS" Partition before making a changes....
Access Hidden Menu
1) To access the Hidden Menu you must open up the Root File Manager/Explorer (or similar Application) to “/” go into “efs”> “carrier”> “HiddenMenu” press down to Open> then select Text with Text Editor> ***IMPORTANT*** USE CAPITALS *** change the >OFF< to >ON<
2) Save the Changes
3) Exit, Exit, Exit, Exit, & Battey Pull/Reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All codes in post #2 should work with most Note2 devices. But if not then do the above^^^^^^^^^^^^ steps!!!!
All codes below confirmed working on Note 2....
WARNING THESE COMMANDS MAY ALTER THE SETTINGS OF YOUR DEVICE, CAN MAKE YOUR DEVICE FUNCTION IMPROPERLY DO NOT MAKE CHANGES TO SETTINGS IF YOU ARE UNSURE WHAT THE OUTCOME WILL BE. RESPONSIBILITY FOR ACTIONS ATTEMPTED ARE AT YOUR OWN RISK, NOT THE OP’S, AND CERTAINLY NOT THE RESPONSIBILITIES OF XDADEVELOPERS.COM (YOU HAVE BEEN WARNED)
Click to expand...
Click to collapse
*#06#
Click to expand...
Click to collapse
- IMEI/MEID -
*#2263#
Click to expand...
Click to collapse
- Service Mode[Toggle Auto/WCDMA/GSM/LTE bands and modes
-
*#*#4636#*#*
Click to expand...
Click to collapse
- Ping Test -
*#0*#
Click to expand...
Click to collapse
- Testing menu -
*#0228#
Click to expand...
Click to collapse
- BatteryStatus -
*#0011#
Click to expand...
Click to collapse
- Service Mode -
*#1234#
Click to expand...
Click to collapse
- Android Version -
*#2663#
Click to expand...
Click to collapse
- Firmware Version-
*#197328640#
Click to expand...
Click to collapse
- Service Mode Main Menu-
*#7353#
Click to expand...
Click to collapse
- Quick Test Menu -
*#12580*369#
Click to expand...
Click to collapse
- SW & HW Info -
*#9090#
Click to expand...
Click to collapse
- Diagnostic Configuration -
*#0283#
Click to expand...
Click to collapse
- Audio Loopback Control -
*#7284#
Click to expand...
Click to collapse
- USB I2C Mode Control -
Reserved..
Just in Case...
Bajanman said:
Reserved..
Click to expand...
Click to collapse
Thanks for the info bajanman. I'm sure there will be some here to find this thread useful.
:thumbup:
Sent from my Note 2 running MEAN MUTHA F'N BEAN????
Good information thanks! BTW.. feeling better these days?
Exelent...
Enviado desde mi SAMSUNG-SGH-I317 mediante Tapatalk
wargear said:
Good information thanks! BTW.. feeling better these days?
Click to expand...
Click to collapse
Thanx:thumbup:
Yeah feeling better, but still taking it easy...
SENT FROM MY SAMMY TO YOUR? EYES USING TAPTALK
Thanks, however, can someone shed some light on this, because all these codes are working on Note 2 even if you are not rooted on stock Rom.
So, what does changing the EFS from OFF to ON?
Sent from my SGH-T889 using xda premium
premiatul said:
Thanks, however, can someone shed some light on this, because all these codes are working on Note 2 even if you are not rooted on stock Rom.
So, what does changing the EFS from OFF to ON?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Your welcome...
I gave full instructions for those that it wasn't working for....
And some codes don't work on some note 2 btw...
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Can i sim unlock by doing this
Sent from my SGH-I317 using xda app-developers app
alquistador said:
Can i sim unlock by doing this
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Yes and if your on the correct firmware!
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
premiatul said:
Thanks, however, can someone shed some light on this, because all these codes are working on Note 2 even if you are not rooted on stock Rom.
So, what does changing the EFS from OFF to ON?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Ahem.....anyone wants to explain this?
Sent from my SGH-T889 using xda premium
I followed the instructions perfectly. It caused my data signal not to work.
Luckily, reversing the OFF to ON then rebooting restored data.
Sent from my GT-N7105 using xda app-developers app
Perry2547 said:
I followed the instructions perfectly. It caused my data signal not to work.
Luckily, reversing the OFF to ON then rebooting restored data.
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
That's weird cuz you said you reverted back to ON when it was OFF??
The instructions say turn it ON in the first place. But it's working now which is good.
Sent from my SAMSUNG-SGH-I317 using Forum Runner
It was OFF, then after reading this read, I changed it to ON, turned phone off, removed battery, restarted, no data. Waited several minutes, I might add.
Then, I went back in changed it to what it originally stated: OFF. Now everything working.
I'm running cm 11. Would that matter?
Sent from my GT-N7105 using xda app-developers app
---------- Post added at 05:57 PM ---------- Previous post was at 05:55 PM ----------
Ok, I see where I wrote the wrong thing on the first reply.
I should have wrote, " reversed the ON to OFF"
ADHD med hadn't kicked yet when I first posted.
Sent from my GT-N7105 using xda app-developers app
Perry2547 said:
It was OFF, then after reading this read, I changed it to ON, turned phone off, removed battery, restarted, no data. Waited several minutes, I might add.
Then, I went back in changed it to what it originally stated: OFF. Now everything working.
I'm running cm 11. Would that matter?
Sent from my GT-N7105 using xda app-developers app
---------- Post added at 05:57 PM ---------- Previous post was at 05:55 PM ----------
Ok, I see where I wrote the wrong thing on the first reply.
I should have wrote, " reversed the ON to OFF"
ADHD med hadn't kicked yet when I first posted.
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Lol.
Yeah cm 11 might be the problem... but not sure...
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Finally a way for us to use hidden menu in dialer mode. Thanks so much for this amazing thread. :good:
Delete.
Related
Hello all. I was wondering if anyone knew how to remove the 100 sms/hour limit?
I have seen other threads and searched on the web but none of the methods I found work.
Can someone please help.
Thank you.
UPDATE: Here is a how to guide I put together
http://forum.xda-developers.com/showthread.php?t=1835056
Hostage XII said:
Hello all. I was wondering if anyone knew how to remove the 100 sms/hour limit?
I have seen other threads and searched on the web but none of the methods I found work.
Can someone please help.
Thank you.
Click to expand...
Click to collapse
There's a limit? ill be damned.
what rom u on?
I use a text spammer and it still sends the texts even with the 100 limit warning
Sent from my SPH-L710 using xda app-developers app
I've never hit that limit....But have sent over 100 in a hour before.
Sent from Pluto.
Hostage XII said:
Hello all. I was wondering if anyone knew how to remove the 100 sms/hour limit?
I have seen other threads and searched on the web but none of the methods I found work.
Can someone please help.
Thank you.
Click to expand...
Click to collapse
It is in AOSP so I don't think you can change it. Although In the AOSP messaging app once you hit 100 it says something like messaging is sending too many sms do you wish to allow it
Sent from my SPH-L710 using xda app-developers app
billard412 said:
There's a limit? ill be damned.
what rom u on?
Click to expand...
Click to collapse
AOKP Jellybean
jamcar said:
It is in AOSP so I don't think you can change it. Although In the AOSP messaging app once you hit 100 it says something like messaging is sending too many sms do you wish to allow it
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Yeah thats the message I'm getting. I'm using GoSMS but I know the limit thing is within the OS itself.
Def. Can on tw lol.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First group
Second group.
First group
Second group
Lol yea I tested it haha
Sent from Pluto.
Sent from my SGH-I747 using xda app-developers app
Hostage XII said:
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
There is no way to remove it.
it's because AOKP is a port from another device... most likely the international GSM version.
This warning happens with GSM roms.
at least thats what i understood when i had the Gnex running Jelly Bean... which was a port from the international nexus.
Wolfbeef123 said:
There is no way to remove it.
it's because AOKP is a port from another device... most likely the international GSM version.
This warning happens with GSM roms.
at least thats what i understood when i had the Gnex running Jelly Bean... which was a port from the international nexus.
Click to expand...
Click to collapse
Alright. Thank you buddy. Oh well I guess I'll just have to deal with it for now.
Sent from my SGH-I747 using xda app-developers app
UPDATE: I finally was able to increase the sms limit.
I went into /data/data/com.google.android.gsf/databases/gservices.db
From there I went ahead and added the record "sms_outgoing_check_max_count" and set the value to "9999"
To be on the safe side I also went into /data/data/com.android.providers.settings/databases/settings.db
Opened the "system" table and added the record "sms_outgoing_check_max_count" and set the value to "9999"
Backed out once and went into the "secure" table and added the same record.
Then I rebooted and tested it out with SmsBomber and no more annoying message.
Thanks to this thread for pointing me in the right direction http://forum.xda-developers.com/showthread.php?t=626771
Hostage XII said:
Alright. Thank you buddy. Oh well I guess I'll just have to deal with it for now.
Sent from my SGH-I747 using xda app-developers app
UPDATE: I finally was able to increase the sms limit.
I went into /data/data/com.google.android.gsf/databases/gservices.db
From there I went ahead and added the record "sms_outgoing_check_max_count" and set the value to "9999"
To be on the safe side I also went into /data/data/com.android.providers.settings/databases/settings.db
Opened the "system" table and added the record "sms_outgoing_check_max_count" and set the value to "9999"
Backed out once and went into the "secure" table and added the same record.
Then I rebooted and tested it out with SmsBomber and no more annoying message.
Thanks to this thread for pointing me in the right direction http://forum.xda-developers.com/showthread.php?t=626771
Click to expand...
Click to collapse
I got this when trying to access /data/data/com.android.providers.settings/databases/settings.db
mulletcutter said:
I got this when trying to access /data/data/com.android.providers.settings/databases/settings.db
Click to expand...
Click to collapse
Are you using root explorer?
Sent from my SPH-L710 using xda app-developers app
Hostage XII said:
Are you using root explorer?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
yep and sqlite.
mulletcutter said:
yep and sqlite.
Click to expand...
Click to collapse
Hmm okay. I have gotten this message before. Im not sure how i fixed it.What ROM are you running?
Sent from my SPH-L710 using xda app-developers app
Hostage XII said:
Hmm okay. I have gotten this message before. Im not sure how i fixed it.What ROM are you running?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1803507
mulletcutter said:
http://forum.xda-developers.com/showthread.php?t=1803507
Click to expand...
Click to collapse
Okay do you have SuperSU or superuser installed?
Sent from my SPH-L710 using xda app-developers app
Hostage XII said:
Okay do you have SuperSU or superuser installed?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
superuser, do i need SuperSU?
mulletcutter said:
superuser, do i need SuperSU?
Click to expand...
Click to collapse
Yes. On the latest CM builds superuser tends to act funny so download supersu from the market (its free ) and launch it,it'll ask to update binaries, do it and once its done try opening the settings.db again.
Also if you don't have busy box installed install that as well. First install supersu though
Sent from my SPH-L710 using xda app-developers app
Hostage XII said:
Yes. On the latest CM builds superuser tends to act funny so download supersu from the market (its free ) and launch it,it'll ask to update binaries, do it and once its done try opening the settings.db again.
Also if you don't have busy box installed install that as well. First install supersu though
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
nope same, thing, supersu and busy box installed...
mulletcutter said:
nope same, thing, supersu and busy box installed...
Click to expand...
Click to collapse
Have you tried rebooting?
Sent from my SPH-L710 using xda app-developers app
First and foremost i would like to say that i did not do this alone. With the help of Ogdobber, we got it working! its only right that i give half the credit to him! Since the first day owning this device, i tried numerous times to try and get it working, and now finally here it is!!
[THIS SHOULD WORK ON ALL VARIANTS (VERIZON AND ATT) WITH A CUSTOM RECOVERY, HOWEVER ITS TESTED FOR SURE ON TMOBILE]--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTRUCTIONS.. (MUST BE ON A DEOXDED TOUCHWIZ ROM. stock odexed roms will not work with this fix! I am running wicked V2 and it is confirmed working..)
10/5/2013 update.... Due to the new wallet verson, a build.prop change is NOT necessary... this can now be simplified into 2 very easy setep.
Step 1 .. Download my lib fix file and the modified wallet zips here..
https://www.dropbox.com/s/gvm9pvjqmo1j9j1/sgs4-lib_fix-w1.6-R96-v13.zip
https://www.dropbox.com/s/y8x1w9v97whpcuq/Google Wallet 2.0-R133-v9-MODDED.zip
Step 2.... Flash both files in CWM
reboot and setup wallet and youre golden!
-------------------------------------------------------------------------------
HUGE THANKS TO OGDOBBER, Xeonox,romracer, and everyone who helped get this working!
Confirmed working on Wicked V2.
Thanks for all your hard work & weeks of fiddling around to get this up & working! :thumbup:
Sent from my SGH-M919 using xda premium
sorry but how do you mod prop files to sprints? with a rooted file manager? if so, where are the files located under?
cbbplanet said:
sorry but how do you mod prop files to sprints? with a rooted file manager? if so, where are the files located under?
Click to expand...
Click to collapse
Yes.. I prefer root explorer..
Long press system/build.prop, choose "open with text editor"
Find that string that I posted above and modify them 3 to the sprint names listed above.. Exit and save
Sent from my SPH-L720 using Tapatalk 2
UPDATE......
After following the instructions in the OP, download MoDaCo's xposed toolkit from here http://www.modaco.com/topic/361634-xmod-modaco-toolkit-for-xposed-framework/
Enable the module in xposed and reboot
load MoDaCo's toolkit, click Google, check "Disable Wallet checks" and "Prevent app disabling"
Reboot
change build.prop back to orginal
Reboot
Profit!
dannyben said:
UPDATE......
After following the instructions in the OP, download MoDaCo's xpsoded toolkit.
Enable the module in xposed and reboot
load MoDaCo's toolkit, click Google, check "Disable Wallet checks" and "Prevent app disabling"
Reboot
change build.prop back to orginal
Reboot
Profit!
Click to expand...
Click to collapse
Im gonna try this and edit the op
Sent from my SPH-L720 using Tapatalk 2
joemagistro said:
Im gonna try this and edit the op
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
Found an even easier way without modaco toolkit.. Will update in a little
Sent from my SGH-M919 using Tapatalk 2
Tried this on Wicked v2, and the first time I ran the Wallet app, it FC'd. However, launching it a second time, it succeeded. Not sure why, thought it was odd, but now it's up and running. Woot.
I do get the 'Unsupported Device' at top, but other than that it seems to fire off okay.
coyttl said:
Tried this on Wicked v2, and the first time I ran the Wallet app, it FC'd. However, launching it a second time, it succeeded. Not sure why, thought it was odd, but now it's up and running. Woot.
I do get the 'Unsupported Device' at top, but other than that it seems to fire off okay.
Click to expand...
Click to collapse
Yepp same here! Thanks!! Can't wait to test it out!
Sent from my SPH-L720 using XDA Premium HD app
OP updated if you would like to keep your tmo build prop.. Follow steps 7 and up of you already did the fix
Sent from my SGH-M919 using Tapatalk 2
coyttl said:
I do get the 'Unsupported Device' at top, but other than that it seems to fire off okay.
Click to expand...
Click to collapse
The unsupported device message goes away with the xposed installer mod.
Sent from my SGH-M919 using xda premium
Followed all steps, works like a charm ty.
joemagistro said:
Found an even easier way without modaco toolkit.. Will update in a little
Click to expand...
Click to collapse
I suppose it does the same hack, but found a couple of other very useful hacks in the toolbox....
1. Can removed the battery icon from the notifications bar (and just show %)
2. Enable NFC to always work... When the screen is off.
Sent from my SGH-M919 using xda premium
Thank you, both of you. My dreams of now being able to use my phone to buy a soda from a vending machine have come true. Thanks
joemagistro said:
OP updated if you would like to keep your tmo build prop.. Follow steps 7 and up of you already did the fix
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
First of all... congrats guys! Well done! :good:
Secondly... when you say "steps 7 and up of you already did the fix".... does that mean we only need to do steps 8 and on, if we have not done the fix?
luckyduck69 said:
First of all... congrats guys! Well done! :good:
Secondly... when you say "steps 7 and up of you already did the fix".... does that mean we only need to do steps 8 and on, if we have not done the fix?
Click to expand...
Click to collapse
If you did not do the fix, start from scratch
Sent from my SGH-M919 using Tapatalk 2
joemagistro said:
If you did not do the fix, start from scratch
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Cool. Thanks. One last question... If a black bear and a polar bear get it on... do they make a panda?
luckyduck69 said:
Cool. Thanks. One last question... If a black bear and a polar bear get it on... do they make a panda?
Click to expand...
Click to collapse
Nope itll be a grey bear. Duh!!!!
Sent from my SGH-M919 using xda app-developers app
bzlik88 said:
Nope itll be a grey bear. Duh!!!!
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
RAWR
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Okay, I'm done. Back on topic. LOL
:silly:
For those of you that jumped the gun like myself and forgot to note what the tmobile ones were...
ro.product.model=SGH-M919
ro.product.name=jfltetmo
ro.product.device=jfltetmo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CM10.1 is here for the E980, aka the ATT LG Optimus G Pro. Other varients will be brought online shortly.
This is a source build rom, which includes all the latest changes from cm. This is being co-developed by @madmack and myself.
Instructions
You MUST be using a recovery with loki support built in. IE twrp or cwm from freegee. The boot images are not pre-lokified and I will not be doing that. That is why I built loki into the recoveries .
Download cm-10.1, and gapps. Put them on your sdcard, reboot to recovery. Flash, and enjoy!
The current version is:
20130831
The latest will be avaliable at:
http://downloads.codefi.re/madmack/GPRO/CM10_1
Gapps:
Currently BaNkS Seems to work best:
http://forum.xda-developers.com/showthread.php?t=2012857
Click to expand...
Click to collapse
Known Issue
none
Click to expand...
Click to collapse
Change Log
Current Version: 20130826
Changelog:
20130826:
Fixes for lots of things.
20130802:
Fixed call bug
Fixed sensors
20130801:
Initial Release
Click to expand...
Click to collapse
Special Thanks To!
None of this would be possible without the following people:
madmack, for his co-development and testing!
gotroot
apascual89
thecubed
Click to expand...
Click to collapse
Source
Device repo, Vendor Blobs and kernel
http://github.com/TeamLGOG
Click to expand...
Click to collapse
Downloading now.
When the f*ck did we get ice cream??
Very nice work thanks foe your hard work def will donate asap
Sent from my LG-E980 using xda premium
Downloading now. Still wish there was a stock debloated deodexed rom
Sent from my LG-E980 using xda app-developers app
phillip_viado said:
Downloading now. Still wish there was a stock debloated deodexed rom
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Word.
Thank you thank you thank you!!!
sent from my OG PRO using tapatalk 4
Installed it. Its so fast.
Known issues that I noticed that wasn't mentioned. =
No boot animation
Notification light won't stop blinking
No vibration
No auto rotation
Sent from my LG-E980 using xda app-developers app
Downloaded! Thank you so much, I can't wait to see the completely working version!
phillip_viado said:
Installed it. Its so fast.
Known issues that I noticed that wasn't mentioned. =
No boot animation
Notification light won't stop blinking
No vibration
No auto rotation
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
yes there IS boot animation
---------- Post added at 06:44 AM ---------- Previous post was at 06:41 AM ----------
F240S: works great
but 3g/lte not working
cannot connect to service network.
I've been waiting to test this bad boy. Thank you guys so much. Donations will be coming August 16th!!!!!
Edit: bug: Call bug from LGOG where when you place a call, it shows it failed but it actually went through. I know there was a fix for it on the LGOG forums, but I don't remember what it is.
So issue of F240s:
no network connection
always button backlight shining
no vibration
no auto rotation
yes, works great except for that and what you mentioned
Thank you so much to everyone involved for getting us up and running!
The one quirk I've found so far is the Network Operator is set to Maritime (could just be me, though). When AT&T is selected I get a "Can not register" error and no signal. Data and cellular reception seem fine on Maritime.
mrfeuss said:
Thank you so much to everyone involved for getting us up and running!
The one quirk I've found so far is the Network Operator is set to Maritime (could just be me, though). When AT&T is selected I get a "Can not register" error and no signal. Data and cellular reception seem fine on Maritime.
Click to expand...
Click to collapse
Maritime is att. We had the same issues on the nexus 4 and lgog. Just a display bug. Its also why some people will and others will not have the call out bug.
One advantage I've found with it showing maritime is that I get service a lot more areas compared to being on the stock ROM.
Sent from my LG-E980 using xda app-developers app
Jammol said:
Maritime is att. We had the same issues on the nexus 4 and lgog. Just a display bug. Its also why some people will and others will not have the call out bug.
One advantage I've found with it showing maritime is that I get service a lot more areas compared to being on the stock ROM.
Click to expand...
Click to collapse
Awesome, thanks for the info. Other than that and the known issues, everything seems to be running like a top!
EDIT:
Torch does not light and force closes, but that's probably just camera-related.
Wifi Hotspot Tethering is working.
Only issues i had were camera & the notification light wouldnt shut off other than that its great !!!!!
Sent from my LG-E980 using xda app-developers app
Jammol said:
I've been waiting to test this bad boy. Thank you guys so much. Donations will be coming August 16th!!!!!
Edit: bug: Call bug from LGOG where when you place a call, it shows it failed but it actually went through. I know there was a fix for it on the LGOG forums, but I don't remember what it is.
Click to expand...
Click to collapse
That's fixed now, thanks for pointing it out.
Sent from my LG-LS970 using xda app-developers app
Shelnutt2 said:
That's fixed now, thanks for pointing it out.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Hmm.... I want to know why my phone is still no service even when I switched back to stock ROM(data, cache,etc wiped before flashing KDZ)
is there anything that touches except for system and boot partition?(such as baseband)
reider123 said:
Hmm.... I want to know why my phone is still no service even when I switched back to stock ROM(data, cache,etc wiped before flashing KDZ)
is there anything that touches except for system and boot partition?(such as baseband)
Click to expand...
Click to collapse
Are your imei fields populated? If no, en lies your reason. Also it could be the modem. Is the modem for the f240 the same as the e980?
Sent from my LG-E980 using xda app-developers app
Jammol said:
Are your imei fields populated? If no, en lies your reason. Also it could be the modem. Is the modem for the f240 the same as the e980?
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Imei is just normal.
Thought modem iwas the problem but when I installed chinese rom and flashed modem, nothing special happned
Only issues so far, only the flash home button and the camera the only issues I have. I was wondering if I used another camera apk if that would fix that issue? Thank you for your work.
---------- Post added at 10:04 AM ---------- Previous post was at 09:51 AM ----------
Data is working fine, the home button doesn't seem to work when phone is locked. I will keep testing.
I'm reading that Samsung disabled multi user support. Does rooting solve this?
rumatt said:
I'm reading that Samsung disabled multi user support. Does rooting solve this?
Click to expand...
Click to collapse
Nope
Sent from my EVO using xda app-developers app
Majin101 said:
Nope
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
So would there ever be hope of this? Eventually a stock android custom ROM or something?
rumatt said:
So would there ever be hope of this? Eventually a stock android custom ROM or something?
Click to expand...
Click to collapse
Touchwiz 4.2.2 ROM supports multi users. You just need to follow the instructions here:
http://www.pocketables.com/2013/03/how-to-enable-multiple-user-mode-on-cyanogenmod-10-1-and-some-other-android-4-2-2-roms.html
adding fw.max_users=8 to build.prop makes it permanent, otherwise you need to run the setprop each time you reboot.
Enjoy your new feature....
rmein said:
Touchwiz 4.2.2 ROM supports multi users. You just need to follow the instructions here:
http://www.pocketables.com/2013/03/...d-10-1-and-some-other-android-4-2-2-roms.html
adding fw.max_users=8 to build.prop makes it permanent, otherwise you need to run the setprop each time you reboot.
Enjoy your new feature....
Click to expand...
Click to collapse
Cool thanks. Has anyone actually tried this though? I tried it on my Cm 10.1 Samsung S3 and it didn't actually work. You can add the users, but the lock screen doesn't give you a way to select them.
rumatt said:
Cool thanks. Has anyone actually tried this though? I tried it on my Cm 10.1 Samsung S3 and it didn't actually work. You can add the users, but the lock screen doesn't give you a way to select them.
Click to expand...
Click to collapse
I've tried it and it works:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unlock screen:
I have a wifi only GT-N5110. It may not work with the 5100 and 5120 as they have phone capabilities, so if anyone cares to try it out on one of them, report back here.
That's great to know. Thanks!
I tried this method on my galaxy tab 2 (4.2.2 stock odexed) but I can't create new user .it's saying this ---->
Help me..plz...
Sent from my GT-P3100 using Tapatalk 4 Beta
openmatrix said:
I tried this method on my galaxy tab 2 (4.2.2 stock odexed) but I can't create new user .it's saying this ---->
Help me..plz...
Sent from my GT-P3100 using Tapatalk 4 Beta
Click to expand...
Click to collapse
It looks like the pm command is not working properly. What happens if you do a pm without any arguments? It should give you the pm help page.
If it still gives you an error try fixing permissions in recovery and see if that helps.
rmein said:
It looks like the pm command is not working properly. What happens if you do a pm without any arguments? It should give you the pm help page.
If it still gives you an error try fixing permissions in recovery and see if that helps.
Click to expand...
Click to collapse
No problem in pm command
Look here :
Sent from my GT-P3100 using Tapatalk 4 Beta
Do pm list users and pm get-max-users work ok?
It may just be that the tab 2 can't support user profiles, but I would have though you should still be able to set them up, even if the rom doesn't give you the ability to switch between them.
I'm glad this thread was bumped. I was lookin for the same thing
Sent from my GT-N5110 using Tapatalk 4
rmein said:
Do pm list users and pm get-max-users work ok?
It may just be that the tab 2 can't support user profiles, but I would have though you should still be able to set them up, even if the rom doesn't give you the ability to switch between them.
Click to expand...
Click to collapse
Yes it's working properly.
look this:
And I can see the users option in settings :
And the new user option works :
But I can't make the new user , the settings is force closing :
What to do now????
Sent from my GT-P3100 using xda premium
openmatrix said:
Yes it's working properly.
look this:
View attachment 2229854
And I can see the users option in settings :
View attachment 2229855
And the new user option works :
View attachment 2229862
But I can't make the new user , the settings is force closing :
View attachment 2229858
What to do now????
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Just as me in N5100
Rotry83 said:
Just as me in N5100
Click to expand...
Click to collapse
May be there's a fix .hope we will get it:sly:
Sent from my GT-P3100 using XDA Premium 4 mobile app
openmatrix said:
May be there's a fix .hope we will get it:sly:
Sent from my GT-P3100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is my error in terminal emulator...
Enviado desde mi GT-N5100
Rotry83 said:
Just as me in N5100
Click to expand...
Click to collapse
Obtained, just with a wipe data
Enviado desde mi GT-N5100 usando Tapatalk 4
Rotry83 said:
Obtained, just with a wipe data
Enviado desde mi GT-N5100 usando Tapatalk 4
Click to expand...
Click to collapse
Good , welldone bro:thumbup::thumbup::thumbup:
Sent from my GT-P3100 using XDA Premium 4 mobile app
Sent from my GT-P3100 using XDA Premium 4 mobile app
Worked for me but I couldn't tell if this sets up a whole new user folder like in windows, in turn eating the limited 16gb we have. I want to reinstall a bunch of apps I already have for my kids but I don't want them taking up double the disk space. Can anyone expand on this? Damn you Google for taking away app2sd
Sent from my HTCONE using Tapatalk 2
FrozenRiff said:
Worked for me but I couldn't tell if this sets up a whole new user folder like in windows, in turn eating the limited 16gb we have. I want to reinstall a bunch of apps I already have for my kids but I don't want them taking up double the disk space. Can anyone expand on this? Damn you Google for taking away app2sd
Sent from my HTCONE using Tapatalk 2
Click to expand...
Click to collapse
Yes, it sets up a whole new user folder, and eats up some space, but apps istalled for multiple users do not take up double the disk space. The application data is only downloaded once, but the user data takes up space for each user.
/data/app is shared between users. (where the application is)
/data/media/obb is shared between users. (where the extra application resources are for games, etc)
The only problem is if apps download extra data to /data/media/0 (primary account), or data/media/10, etc.. (secondary accounts). It would be worth watching out for those and avoiding them, but it will not happen with well behaved apps.
Hello I don't know about some of you guys, but I turn my MobileData off and on all day long.. And I noticed that there wasn't a toggle for data on the AT&T Variant of 4.3 so I did some research and I found out there is a way how to enable the MobileData toggle in the Notification Panel!
Here's how..
1. You'll want to download SQLite Editor from here... (http://d-h.st/MQD)
2. Then once the app opens and everything loads, you then want to scroll down until you see Settings storage click it.
3. Click "settings.db"
4. Click "system"
5. Now here is the tricky part your going to want to look for "notification_panel_active_app_list" NOT notification_panel_default_active_app_list
6. Long press on it and click "Edit Record"
7. Where it says value you'll see all your notification panel toggles..click all down and add "MobileData;"
8. Once you do that click save and reboot!
WIFIHOTSPOT:
Follow the same steps as above but Add "WiFiHotspot;" using the listed instructions no quotes and note the semicolon at the end. Also, its case-sensitive.
To add both mobile data and WiFi AP, it will look like this:
MobileData;WiFiHotspot;
Save, reboot, then add the toggles in settings. (thanks @taranis17)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IF YOU ARE GETTING THIS ERROR!!!
Please run TB restore fixer (link below), and try again as it SHOULD fix your problem.
LINKS
TB RESTORE FIXER
https://play.google.com/store/apps/details?id=com.viper.tbrestorefixerfree&hl=en
WANT 12 TOGGLES INSTEAD OF 10?
Another useful option here is:
notification_panel_active_number_of_apps
it can be set to a slightly larger number if there is not enough slots for all the switches you want (changed from 10 to 12 in my case). Both settings and the panel itself will reflect the change upon restart. (THANKS @avich)
Hello I don't know about some of you guys, but I turn my MobileData off and on all day long.. And I noticed that there wasn't a toggle for data on the AT&T Variant of 4.3 so I did some research and I found out there is a way how to enable the MobileData toggle in the Notification Panel!
Here's how..
1. You'll want to download SQLite Editor from here... (http://d-h.st/MQD)
2. Then once the app opens and everything loads, you then want to scroll down until you see Settings storage click it.
3. Click "settings.db"
4. Click "system"
5. Now here is the tricky part your going to want to look for "notification_panel_active_app_list" NOT notification_panel_default_active_app_list
6. Long press on it and click "Edit Record"
7. Where it says value you'll see all your notification panel toggles..click all down and add "MobileData;"
8. Once you do that click save and reboot!
Click to expand...
Click to collapse
Thank for this!
I also wanted the ;WiFiHotspot; in my toggle and found this: http://forum.xda-developers.com/showthread.php?t=2382496
Its video someone made for the S4 but it works perfect on the Note 2.
I am using Sky Note Air and it worked perfect!.
Excellent... thanks. I used PowerToggles to add the missing MobileData toggle but your method is much cleaner.
You guys are very welcome!!!
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Cbass15 said:
Hello I don't know about some of you guys, but I turn my MobileData off and on all day long.. And I noticed that there wasn't a toggle for data on the AT&T Variant of 4.3 so I did some research and I found out there is a way how to enable the MobileData toggle in the Notification Panel!
Here's how..
1. You'll want to download SQLite Editor from here... (http://d-h.st/MQD)
2. Then once the app opens and everything loads, you then want to scroll down until you see Settings storage click it.
3. Click "settings.db"
4. Click "system"
5. Now here is the tricky part your going to want to look for "notification_panel_active_app_list" NOT notification_panel_default_active_app_list
6. Long press on it and click "Edit Record"
7. Where it says value you'll see all your notification panel toggles..click all down and add "MobileData;"
8. Once you do that click save and reboot!
Click to expand...
Click to collapse
Thanks, you are a life saver..saves me the trouble to go through all the hoops to go data activated. Hmm I wonder what is the code for enabling the lock screen toggle.
Sent from my SGH-I317M using Tapatalk
menbaosusu said:
Thanks, you are a life saver..saves me the trouble to go through all the hoops to go data activated. Hmm I wonder what is the code for enabling the lock screen toggle.
Sent from my SGH-I317M using Tapatalk
Click to expand...
Click to collapse
What is the toggle called on the notification panel?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Cbass15 said:
What is the toggle called on the notification panel?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Lock screen? Is the code case sensitive? Sorry I'm new to this.
Sent from my SGH-I317M using Tapatalk
---------- Post added at 02:02 PM ---------- Previous post was at 01:36 PM ----------
http://forum.xda-developers.com/showthread.php?t=2342370&page=8
I found more codes for the notification bar add on..but I haven't found lock screen yet.
Hello guys, is there a way to change the position of the soft keys? I want the back key in the first place
Enviado desde mi SAMSUNG-SGH-I317 usando Tapatalk 2
phantomas40 said:
Hello guys, is there a way to change the position of the soft keys? I want the back key in the first place
Enviado desde mi SAMSUNG-SGH-I317 usando Tapatalk 2
Click to expand...
Click to collapse
My thread, hope this help:
http://forum.xda-developers.com/showthread.php?t=2021463
Is there a simple way to add others that I grew fond of under Lidroid 15 Toggle Mod, like Mobile Hot Spot, and Flash Light?
Thanks but it swap de capacitive buttons not the soft buttons
Enviado desde mi SAMSUNG-SGH-I317 usando Tapatalk 2
Error
I get below error when clicking on settings.db
Anyone get this error. I have rooted my phone
"An error occured while opening the database. unable to
open database file (code 14):, while compiling: SELECT *
FROM sqlite_master WHERE type in('table',view') ORDER
BY name"
Flame Red said:
Is there a simple way to add others that I grew fond of under Lidroid 15 Toggle Mod, like Mobile Hot Spot, and Flash Light?
Click to expand...
Click to collapse
I will find out that. I know I can add wifi hotspot and the flashlight toggle.
It's just if the Fiancé allows me to be on the computer... Had a little talk the other day and she said I've been ignoring her.. And spending to much time on computer
Sent from my SAMSUNG-SGH-I317 using Tapatalk
goofy22 said:
I get below error when clicking on settings.db
Anyone get this error. I have rooted my phone
"An error occured while opening the database. unable to
open database file (code 14):, while compiling: SELECT *
FROM sqlite_master WHERE type in('table',view') ORDER
BY name"
Click to expand...
Click to collapse
Are you on stock TouchWiz?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Cbass15 said:
Are you on stock TouchWiz?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Yes i'm on I317-UCUBMK6/MJ4
Thanks
goofy22 said:
Yes i'm on I317-UCUBMK6/MJ4
Thanks
Click to expand...
Click to collapse
Deodex?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Cbass15 said:
Deodex?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Yes its Deodexed ROM from this thread
http://forum.xda-developers.com/showthread.php?t=2589891
Thanks
Flame Red said:
Is there a simple way to add others that I grew fond of under Lidroid 15 Toggle Mod, like Mobile Hot Spot, and Flash Light?
Click to expand...
Click to collapse
Yes. Add "WiFiHotspot;" using the listed instructions No quotes and note the semicolon at the end. Also, its case-sensitive.
To add both mobile data and WiFi AP, it will look like this:
MobileData;WiFiHotspot;
Save, reboot, then add the toggles in settings.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
taranis17 said:
Yes. Add "WiFiHotspot;" using the listed instructions No quotes and note the semicolon at the end. Also, its case-sensitive.
To add both mobile data and WiFi AP, it will look like this:
MobileData;WiFiHotspot;
Save, reboot, then add the toggles in settings.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Yes sir! Thank you
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Added the WiFiHotspot toggle.
Sent from my SAMSUNG-SGH-I317 using Tapatalk