Hi all,
first a big THANK YOU to husen4u for his excellent job he does on the p6 rom - very smooth and great experience and since he keeps his rom updated on a nearly daily basis :good: i got a question about updating the rom. Below are the steps I did
1. I flashed my phone to B118CN without bricking it
2. I flashed the V4 of his rom found in this thread: http://forum.xda-developers.com/showthread.php?t=2570602
3. The rom just got an update to V5 -
4. Here is my question - Do I need to install version B118CN again before i can install V5 of the rom? or can I just do a full wipe and install V5 from TWRP Recovery?
Since the Installation Instruction did not change for the latest update which are:
1. You Must Be On B118CN (CAN BRICK YOUR PHONE SO BE CAREFULL)
2. Install TWRP Recovery
3. Wipe Factory Reset
4. Install HYD52ROM-P6-V5.zip
5. Install Gapps
6. Wipe Cache Dalvik
7.Reboot
Thank you for the help - I appreciate this forum a lot
Would like to know the same.
Sent from my P6-U06 using xda app-developers app
tdslaine said:
Hi all,
first a big THANK YOU to husen4u for his excellent job he does on the p6 rom - very smooth and great experience and since he keeps his rom updated on a nearly daily basis :good: i got a question about updating the rom. Below are the steps I did
1. I flashed my phone to B118CN without bricking it
2. I flashed the V4 of his rom found in this thread: http://forum.xda-developers.com/showthread.php?t=2570602
3. The rom just got an update to V5 -
4. Here is my question - Do I need to install version B118CN again before i can install V5 of the rom? or can I just do a full wipe and install V5 from TWRP Recovery?
Since the Installation Instruction did not change for the latest update which are:
1. You Must Be On B118CN (CAN BRICK YOUR PHONE SO BE CAREFULL)
2. Install TWRP Recovery
3. Wipe Factory Reset
4. Install HYD52ROM-P6-V5.zip
5. Install Gapps
6. Wipe Cache Dalvik
7.Reboot
Thank you for the help - I appreciate this forum a lot
Click to expand...
Click to collapse
No you dont need to install B118cn again. You can directly flash without wipe anything. Just wipe dalvik and cache. But i recommend you wipe everything first then install.
Good luck
Thanks
Regards
Husen
Sent from my P6-U06 using xda app-developers app
Thanks, will try v5. Thanks your efforts on this nice Rom
Sent from my P6-U06 using xda app-developers app
edward0181 said:
Thanks, will try v5. Thanks your efforts on this nice Rom
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot. If you need any help feel free to ask.
Sent from my P6-U06 using xda app-developers app
husen4u said:
Thanks a lot. If you need any help feel free to ask.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
A big thanks goes to you husen4u - will try the new V5 tomorrow.
Again, super support from your side
Related
Hello every body , i am new in android OS ,
Tell me please , if i flash my GT-I9082 with costom ROM , does tke Kernel automatically be flashed ?
Thank you
It depends if the rom includes a custom kernel then yes, else no. Roms might be based on the stock kernels as well.
You may flash a custom kernel if there is one available for your device.
Sent from my GT-I9300
pulley06 said:
It depends if the rom includes a custom kernel then yes, else no. Roms might be based on the stock kernels as well.
You may flash a custom kernel if there is one available for your device.
Sent from my GT-I9300
Click to expand...
Click to collapse
thanks a lot for the reply,
- how to know if the rom includes kernel or not ?
- if rom don't includes kernel , and after flashing the device with new kernel should i flash the rom also ?
Thank you .
moumou android said:
thanks a lot for the reply,
- how to know if the rom includes kernel or not ?
- if rom don't includes kernel , and after flashing the device with new kernel should i flash the rom also ?
Thank you .
Click to expand...
Click to collapse
1) It should be mentioned in the ROM thread
2) No
Just flash Kernel and wipe cache and dalvik cache
No need to flash the ROM again
Sent from my GT-I9082 using xda premium
akiratoriyama said:
1) It should be mentioned in the ROM thread
2) No
Just flash Kernel and wipe cache and dalvik cache
No need to flash the ROM again
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Thank you very much Mr akiratoriyama .
Hitting the thanks button speaks volumes at XDa
Hi guys,
I want to install slimbean in my grand but which file should I download because there are 2 files available.. And do I still need to install the updates after installing the rom? thanks in advance.:
Lenov0S890 said:
Hi guys,
I want to install slimbean in my grand but which file should I download because there are 2 files available.. And do I still need to install the updates after installing the rom? thanks in advance.:
Click to expand...
Click to collapse
Whenever downloading ROMs check the dates, install the most recent one (November 15 in this case). It's a complete ROM you don't need any updates on it, just GAPPS for CM10.1 - http://goo.im/gapps/gapps-jb-20130812-signed.zip
Make sure you do these :
1. you are on 4.1.2 firmware
2. wipe data/factory reset
3. wipe cache/dalvik
Download first file which is 86mb...rom
Sent from my GT-I9100 using XDA Premium 4 mobile app
hi there! last day i saw this rom http://forum.xda-developers.com/showthread.php?p=51201303 and i wanted to prove it. Right now i have the hyd52rom JB installed. What do i have to do for installing it? On the post says that i have to install twrp recovery for kitkat, but im on jb. Do i have to first install kitkat and then the twrp? Thanks
roberto96.rr said:
hi there! last day i saw this rom http://forum.xda-developers.com/showthread.php?p=51201303 and i wanted to prove it. Right now i have the hyd52rom JB installed. What do i have to do for installing it? On the post says that i have to install twrp recovery for kitkat, but im on jb. Do i have to first install kitkat and then the twrp? Thanks
Click to expand...
Click to collapse
No just install twrp for kitkat and flash rom as instructed.
Sent from my P6-U06 using xda app-developers app
roberto96.rr said:
hi there! last day i saw this rom http://forum.xda-developers.com/showthread.php?p=51201303 and i wanted to prove it. Right now i have the hyd52rom JB installed. What do i have to do for installing it? On the post says that i have to install twrp recovery for kitkat, but im on jb. Do i have to first install kitkat and then the twrp? Thanks
Click to expand...
Click to collapse
Sorry i find out updating from jb will have some issues. So please flash kitkat beta than only flash omni rom. Thanks
Sent from my P6-U06 using xda app-developers app
husen4u said:
No just install twrp for kitkat and flash rom as instructed.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Well.. i think i have a problem because i dont know how to do all that of bootloader and that things. When i installed my actual rom, i did it looking some forums, but right now i dont find them... Could someone help me please? Thanks
DISCLAIMER: I ACCEPT NO RESPONSIBILITY WHATSOEVER IF YOU BRICK YOUR PHONE USING THIS METHOD. THE INFORMATION SHARED FOR HELPING THOSE HELP THEMSELVES. MADE ONLY FOR THE XDA PRINCIPLE OF "SHARING KNOWLEDGE"
Everyone is requested not to post unnecessary questions. I am making the OP very clear so you need no further assitance. Critics will be ignored and use of foul language and ungrateful words will be reported.
I am making this thread so as to save all the troublesome steps in making a flashable ROM and risk of bricking due to mistakes.The ROM is made following the instructions from @somboons thread I have made this ROM by myself using G2 kdz extractor which is also available in a thread in xda. The Kernel and the Baseband is made by @savoca and our dear @Cloudyfa for that we must thank them and give credit to them for that fine work.
Thanks to @Jeevandon92 for uploading the flashable 20b zip file
UPDATE -20B KK ROM FOR 802-32GB AND 16GB VERSIONS.
This is the latest Kitkat updated 20B ROM flashable on G2 802.
Rom(20B):
https://mega.co.nz/#!ts40zQyD!RdUSXCK3IMfKdpDriWh9kVX3aENsrxiMu5UQge7FacM
Baseband:
https://mega.co.nz/#!oURgCIha!-YJrFCqrLcGNILJjMUpWdcN1HnMrA2l9KvSEDtcIohM
Kernel:
https://mega.co.nz/#!9RBHGbIT!lHCCYGNB6EhLC0EOrweD4L395_f50gyIUJ4Up9VhI3s
IMP: YOU MUST FLASH THE FOLLOWING KERNEL FOR THIS ROM TO GET THE KNOCK CODE FULLY WORKING [thanks @Cloudyfa again for this]
Supersu:
https://mega.co.nz/#!MdQWBKIa!_xbY0diZfHEX3o4V3p_r-bDQbHrCoBAlF6jTNVONCEI
IMPORTANT: Install Busybox from Playstore so that you have a completly working root.
USE TWRP 2.7.0.0 FOR BEST RESULTS....OTHER FLASHING INSTRUCTIONS REMAIN THE SAME AS MENTIONED HEREIN BELOW
THIS ROM HAS FOLLOWING ADVANTAGES:
---KNOCK CODE FULLY WORKING(NEEDS KERNEL AS PROVIDED IN LINK ABOVE)
---TERRIFIC BATTERY BACKUP( I GET 2 FULL DAYS WITH 15% REMAINING)
--- NO MORE BLUETOOTH DRAINING BATTERY (FIXED FOR GOOD)
----AMAZING RAM MANAGEMENT(NOTICABLY 40-50% BETTER RAM MANAGEMENT- I HAVE ALMOST 1GB RAM FREE AT ALL TIMES AFTER DEBLOATING) [/I][/B][/COLOR][/FONT]
PREVIOUS RELEASE
Rom(20A):
https://mega.co.nz/#!TVJV0ajT!fnc1Kfjc7lgBn3jZZ2ukUHFE62EuW9-kgrCECwc1RJk
Baseband:
https://mega.co.nz/#!SBgnRaBT!TnRG7vvk9D7rLZfMatHDZX0zcyivtCo1vAbUoZFFHtQ
Kernel:
https://mega.co.nz/#!2YxVHRJJ!mKFBFJOEZofn-cAjX90RIa5IQOfsi9EUKT05GQmyIK8
Supersu:
https://mega.co.nz/#!SJx0VKbK!Nt3c1XxSzPCmZjijpTnGXPdJExzEfDZ6tSLCf3VQsVc
Requirements:
-A rooted G2 on JB 4.2.2 stock rom.
-Recovery installed : atleast TWRP 2.6.3.3 installed.http://forum.xda-developers.com/showthread.php?t=2472223
-PATIENCE
Please follow the instructions as below for a perfectly rooted Stock Kitkat with Recovery. If you do not follow the instructions, things will go wrong and you may have bricked your G2. Then you would have to flash kdz to restore back your phone.
FOLLOW THE STEPS AND YOU ARE FINE WITH A PERFECT ROOTED KK ROM WITH RECOVERY:-
> DOWNLOAD THE FILES FROM MY FOLDER ON MEGA.
> BACKUP ALL DATA AND INFORMATION, PREFERABLY A NANDROID BACKUP, JUST IN CASE.
1. Copy all the files downloaded from my Mega account to your SD card.
2. Reboot into TWRP recovery.
3. Perform an Advance wipe to wipe: Dalvik,Cache,Data & System. Do not wipe Internal Storage under any circumstances.
4. Flash in following Order one after another, dont boot or wipe in between:
ROM---- BaseBand---- Kernel----SuperSU
5. Wipe Cache/Dalvik (This option is displayed on TWRP after successful flashing)
6. Reboot and,
7. Enjoy KK stock rooted with recovery.
IMPORTANT: Install Busybox from Playstore so that you have a completly working root.
I have tried to give credit to all I am aware of. If you feel you deserve credit for any of your contributions PM me and I will acknowledge. Thank you.
I hope this thread helps everyone looking for rooted kitkat....It takes a negligible effort to press Thanks if this thread helped you or educated you.:good:
Use twrp 2.7.0.0. FOR BEST RESULTS
Sent from my LG-D802 using XDA Premium 4 mobile app
rastigo said:
Use twrp 2.6.3.3 only. Other recovery may not work
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hate to ask but Can we have one for the d803 and i will test it. Its been released a few days ago
If we flash this, does it allow for OTA updates from LG (if/when there are some) or does this 'disqualify' the ROM? Just interested in seeing stock again some day, I get lots of different wants, side effect from the mass dosage of pain meds for severe chronic pain hah.
Thanks for any questions answered.
Sent from my Nexus 7 using Tapatalk
You will get OTA BUT since you would be rooted with custom recovery it will bootloop. I suggest flash and wait. Xda will surely have someone posting any updates. I will make flash able zip rhen which you can use later
Sent from my LG-D802 using XDA Premium 4 mobile app
malek777 said:
Hate to ask but Can we have one for the d803 and i will test it. Its been released a few days ago
Click to expand...
Click to collapse
If i get the kdz file i will make one for you. I don't have the 803
Sent from my LG-D802 using XDA Premium 4 mobile app
rastigo said:
If i get the kdz file i will make one for you. I don't have the 803
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW057495432109876543213/D803R20D_00.kdz
---------- Post added at 06:13 AM ---------- Previous post was at 05:41 AM ----------
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW697495432109876543213/D803B20E_00.kdz
Or this one for bell I got it from bigboys thread
OP updated
OP updated with links to the files individually, as requested by few members here
Would I be able to flash this through that method from CM11?
arkain123 said:
Would I be able to flash this through that method from CM11?
Click to expand...
Click to collapse
I'm pretty sure.
Sent from my VS980 4G using Tapatalk
Enter The Nexus said:
I'm pretty sure.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
I'm wondering 'cause it does say a 4.2.2 rom is needed and CM11 is 4.4, right? Can I just sideload these files from CWM?
Yes you can, but root and twrp 2.6.3.3 is must needed
Sent from my LG-D802 using XDA Premium 4 mobile app
What Rom version is this ? I mean open Europe or something else... Thanks for your work..
Its a universal Rom, for all g2 802.supports all areas. Try it, enjoy
Sent from my LG-D802 using XDA Premium 4 mobile app
@rastigo thanks for this ROM!
Just wanted to report that the process works flawlessly with CWM custom recovery, too; I had it installed because was using Cloudyfa's ROM before.
I like this because is more stock-perfect than others.
Cheers!
Since this ROM have recovery, if we want go back to JB, can it be by flashing nandroid backup via recovery or should flash kdz file?
No you would be required to flash Know unless you have jb baseband
Sent from my LG-D802 using XDA Premium 4 mobile app
rastigo said:
Yes you can, but root and twrp 2.6.3.3 is must needed
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can't access twrp from my device (it's a d805 with a d802 rom), is there no way to flash it through CWM? Would downgrading the installed twrp work?
arkain123 said:
I can't access twrp from my device (it's a d805 with a d802 rom), is there no way to flash it through CWM? Would downgrading the installed twrp work?
Click to expand...
Click to collapse
As I wrote a couple of posts above, I went through the installation process starting from CWM, precisely this version modded by Cloudyfa.
I have TWRP 2.6.3.4 installed. Can I do it? if not how can I downgrade it to 2.6.3.3? thanks and does it matter if the phone 16gb or 32gb
Presenting
Lewa os 5.1 based
4.1.2 JB
All functions normal (excpet GPS & BT)
Excellent battery life
Plus OTA Updates
Download link
http://pan.baidu.com/wap/shareview?...WA&page=1&num=20&fsid=681611616405186&third=0
Installation fails,When i installed it via cwm recovery.what is the solution?
Sent from my LG-LU6200 using xda app-developers app
r.ifat381 said:
Installation fails,When i installed it via cwm recovery.what is the solution?
Sent from my LG-LU6200 using xda app-developers app
Click to expand...
Click to collapse
u have to do 4 wipes
install it via different recovery or do a fresh kdz flash then root/ recovery and install.
abuulala said:
u have to do 4 wipes
install it via different recovery or do a fresh kdz flash then root/ recovery and install.
Click to expand...
Click to collapse
I performed all things you have mentioned. But always the installation process failed. I tried it via hi-recovery,but the result was same. Which recovery you used to flash this rom? Tell me the source,name and version.
Sent from my LG-LU6200 using xda app-developers app
r.ifat381 said:
I performed all things you have mentioned. But always the installation process failed. I tried it via hi-recovery,but the result was same. Which recovery you used to flash this rom? Tell me the source,name and version.
Sent from my LG-LU6200 using xda app-developers app
Click to expand...
Click to collapse
Yse this link and use google to translate
http://lgviet.com/forum/threads/ton...uch-6-0-4-5-ngay-01-12-2013.7967/#post-230791
all recoveries available there. ill reflash this lewa os today and will post result as well as recovery which i used
I used Cwm recovery 6.0.4.5 and just flashed my mobile with lewa rom. its booted smoothly thougha bit slowly but its perfect colors welcomes u even on start screen. change language as well. dont try to use any other Kernel, it will not boot .
iv already posted a link in general section with modified Benjamanwan recovery set.It contains most of the recoveries available
here is download link
www.drive.google.com/file/d/0B7x-G59HLmofTnBVeVo0c3hhMW8/edit?usp=sharing
Hope ur successful this time. now Latest lewa OS is 12-6-2014 update. but unfortunatly i have no link for that but u can download it via OTA.
Best of luck
Tnx bro, now i successfully flash lewa os...its beautiful and bettery friendly.
Sent from my LG-LU6200 using xda app-developers app
r.ifat381 said:
Tnx bro, now i successfully flash lewa os...its beautiful and bettery friendly.
Sent from my LG-LU6200 using xda app-developers app
Click to expand...
Click to collapse
thats great.
abuulala said:
Presenting
Click to expand...
Click to collapse
I have just install Lewa on my phone. But not Vietnamese language. My sister not good in English.
phuongxuanhieu said:
I have just install Lewa on my phone. But not Vietnamese language. My sister not good in English.
Click to expand...
Click to collapse
sorry for late reply, i dont have this phone any more, but u can go to setting-> language and keyboard-> on top lannguage u can try changing language to see if Vietnamese is there.
lewa recovery is the best for flashing
Good