radio jacked up on CM 10 & 11 on SCH-T989 - T-Mobile Samsung Galaxy S II SGH-T989

What more can I say? ... That would be helpful anyways.
It started about CM 11(ending in 14) I have no voice or data service. The cell radio strength bars go from ful to 3g, to empty in a matter of seconds and then repeats, cycljn through full to nothing again .
I've tried flashing the ULVM6(I think) radio and no help.
Any suggestions would be greatly appreciated.
Thanks in advance!

First suggestion would be to read the Forum Rules on posting please, as this does not belong in the Development Section. Move here, thanks.

Judge Joseph Dredd said:
First suggestion would be to read the Forum Rules on posting please, as this does not belong in the Development Section. Move here, thanks.
Click to expand...
Click to collapse
Thanks for the move.
My radio is still jacked up. I'm trying to figure out how to tell if I have the T989 or the T989. I may have the t989 radio instaled.
But a more pressing problem is that I'm getting a Status 7 error when I try to flash. I found the thread on fixing it so I'm going to go down to a stock rom and radio and start from there.

Related

voice recognition not working!!!

my voice search or voice text isnt working i never had this issue before i flashed to fresh 1.0.1 and also my accounts and sync button in the settings page fc, any help thanks!
i had the same issue on fresh, the old version it worked just fine, but i am sure it will be fixed in the next update, his roms have been very good
ok, you should expect this thread to be moved very quickly. Not trying to flame you or anything, just to let you know why...
First, this forum is for development related topics. Building a rom, kernel, app, etc... then here is where you should post a thread.
Looking for general help, post in the Q&A forum. Help with this or that, help my whatever isn't working, etc... those are Q&A type thread topics. They don't belong in development.
In this case however... your best bet for finding a solution would be to search the Fresh 1.0.1 thread. See if anyone else has had the issue with the rom and if a fix is already posted there. It seems your issue is a function of trying the fresh 1.0.1 rom which is discussed in that thread so use that thread.
If your search doesn't turn up anything, then post your question in the fresh thread, not as it's own thread in the development forum. Doing so cluters up the forum and makes it hard to find relevant info (relevant to development topics) and won't be welcomed in general.
You should always start by using the search function of the forum before posting a new thread. Can't say if you did or didn't, just saying this is always the place to start.
Be prepared for this thread to get moved out of dev in short order for the reasons I've stated. It's probably already happening as I type this.
Good luck in your search for a solution...
Just use the included ES File Explorer and browse to the fresh-removed-apks inside you will see VoiceSearch. Just install that apk file and your voice seach should work once more.
To the above poster thank you so much for being so polite while at the same time telling the OP what he did wrong.

Tip: Call delay patch

Hi,
There is a patch for the call delay bug i gingerbread roms like cm7.
Search for call delay patch in market.
Works fine for me
sent from my Desire.
ROM: CM7
TABLE: CM
Doesn't work with me.
what a thread!
failax said:
Doesn't work with me.
Click to expand...
Click to collapse
I use CM7, Coutts .38 kernel. Latest (.08) radio.
Works fine for me
sent from my Desire.
ROM: CM7
TABLE: CM
MOD EDIT: BEFORE POSTING ANY THREAD IN THE DEVELOPMENT SECTION, PLEASE READ THE FOLLOWING:
If you have developed a ROM, or are working with others to do so, the development forum is somewhere to discuss and share ideas, post useful feedback and logs or crash dumps, and to discuss a common goal developers are trying to achieve.
It is NOT the place to post your question because it gets higher traffic, or because more experienced users frequent it. Doing this just annoys those who are working on the device, and drives them away. Developers don't want to wade through 20 threads of "Help me urgently" to find their threads for porting and fixing camera issues etc. Similarly, if a thread is designated as discussion for developers say, porting a camera fix, please do not post in there asking "When will it be ready?", "Can I flash this yet?" etc. This is both completely disrespectful to those working on the project (you evidently haven't read the important posts in the thread), and also is making it harder for developers to find comments from other developers or testers when required.
Similarly, don't make loads of "Thanks for your work here" posts in an active development thread. It's just as annoying to developers as asking when something will be ready. If a ROM is complete, then go ahead and thank the developer if you wish, but don't go into threads for devs only, and interrupt it to post "thanks". It's basically spamming, and is treated as such.
If you are posting in development, you should have read every sticky and notice there, and should be actively developing or helping in the development of something. Developing isn't installing a ROM, or using a tweak, it's creating a ROM or other hack or tweak. If you haven't read for several days before starting out on XDA, you are likely about to ask something already solved. I registered on XDA when I first wanted to post, and that was to join in a discussion on something. Sure, join up and ask a question, but read the information available in General and Q&A first, as your question will have been asked before. Search is your friend here, become familiar with it.
Regarding when to post in development if you are not actually developing something, there is one occasion where it's acceptable. If you find a leak of a new ROM, which isn't already posted, and you verify it's legitimacy via either running it, or based on the source you obtained it from, then this is assisting in development, and should be posted in development. If you want to ask when a leak will be available use search first, then if not already in discussion, open a thread in general or Q&A.
If you have a problem flashing a ROM, this is NOT related to development. It's up to you to determine if it is specific to a particular ROM, and post useful information in that developer's existing thread for the ROM. If it happens on more than one ROM, and isn't a known issue (remember you should read several times more words than you post), then find out what you are doing wrong. Check guides written by others, try to repeat the problem and see if it happens every time. Something needs to be reproducible to be fixed effectively.
Once you have identified what you need help with go to the device Q&A forum (general if device lacks one), and make a clear, informative thread that explains the issue, and what you have tried doing to fix it. Did you re-download the ROM? Did you ask a friend to flash it for you, to reduce chance of user error? What steps (exactly) did you follow? What errors did you see (exact wording)? Did you double check all the steps? Did you do a wipe or hard reset?
If you make a clear, concise, yet detailed post, you will find help forthcoming, and should get the problem sorted very quickly. If someone suggests you try something, report back on what happened, did it work etc. Then, next time someone has this issue and searches, they will find this and have a verified and tested solution.
So remember... before you start a thread in development, ask yourself what you are developing. If you can't answer, then stop, step away from the post button, and think about where you are posting. Would it be better in General or Q&A, or is some more time with your best friend, search, required?
Click to expand...
Click to collapse
so huh? 10chars
As I said before, if you format everything ant then fresh install CM7 and gapps, you have no call delay... I dont have it... you can only restore SMS, no settings, NOTHING
Midian666 said:
so huh? 10chars
Click to expand...
Click to collapse
Im sorry. Plz remove this thred.
I shall do my homework and read the rules again.
sent from my Desire.
ROM: CM7
TABLE: CM

[Q] No Wifi after CWM9 Beta1 upgrade

Hi,
This is an issue which im not finding any answers too anywhere. My previous attempts all failed making me try again and wait hopefully.
After i upgraded to ics (= CWM9 Beta1 of course) i have lost my ability to use Wifi... that means that when i turn on my wifi on the phone it doesnt find my connection.
Wifi is a must and this is strange why there isnt an answer to this question. What must i do to get my wifi up and running or at least find where the problem lays? I asked my ISP support so that they MIGHT be able to help but the dude on the line said that it seems ics isnt very good at wifis... i dont know if he was right or not but this definitely isnt a wide spread issue since internet search didnt show me anything much and it doesnt seem to be a complex problem either (i might be wrong). So please help me if you can.
Thanks in advance
The general section is the right place to post this kind of question and I guess you've already posted there a thread asking on a "how to" and have replied a thread on where you can find tons of information.
Basically, you need to flash your phone to a better baseband XXLM6 or XXLM8 to which will help you fix your wifi problem. Find a stock ROM with that baseband. Use the given thread I suggested in your other post.
Sent from my GT-I8150 using xda premium
i didnt see any posts on my other thread, unless you posted after i left... i was waiting for hours to get this fixed.
So how do i upgrade? Does this mean i will lose my ics?
Nope. there is no topic which can help me there.
sevenmad said:
Nope. there is no topic which can help me there.
Click to expand...
Click to collapse
Simply try to do a wipe cache and devil cache then reflash the rom

My e973 phone has no signal

My phone(e973 bell) had no signal when I came back 4.0.4 from 4.2.2. I tried to install other KDZ files but the problem still hasn't been solved. My phone now has no signal. Help me:crying:
solution might be to flash another modem? I'm not sure though. One thing I would recommend is probably to post this in the QA section instead because it doesn't seem related to a specific ROM or any Canadian ROM development.
mk_ln said:
solution might be to flash another modem? I'm not sure though. One thing I would recommend is probably to post this in the QA section instead because it doesn't seem related to a specific ROM or any Canadian ROM development.
Click to expand...
Click to collapse
I'm sorry about that, could you tell me where I can download modem for e973? thanks a lot
No need to create the same thread in multiple forums... Q&A, Help & Troubleshooting thread should be sufficient. Thread Closed.

forum etiquiet

am i not posting things properly? have made several posts but not really getting many replies or help. Am i not posting properly or clearly enough? need help with new phone that will not boot proper or factory reset...see my other post for more info
galaxys4rooted said:
am i not posting things properly? have made several posts but not really getting many replies or help. Am i not posting properly or clearly enough? need help with new phone that will not boot proper or factory reset...see my other post for more info
Click to expand...
Click to collapse
You may have better luck if you go to your device forum. Below are links to the S4 international forum and the ATT S4 forum but all of your phones should have their own forums.
https://forum.xda-developers.com/galaxy-s4
https://forum.xda-developers.com/galaxy-s4-att

Categories

Resources