Develop Bugs

[Q] Can't boot flashmode or flashboot mode

Phone with official rom , never isntalled CWM or any unofficial stuff. It boots ok to standard mode but not any other mode. I have tried in two different pcs with Windows XP and Windows 8. Phone doesn't even seem to try to boot in those modes, is not like the PC isn't detecting it.
I'm totally lost on how to recover the flashmode functionality to be able to unlck bootloader and install CM, any help will be welcome.

madmalkav said:
Phone with official rom , never isntalled CWM or any unofficial stuff. It boots ok to standard mode but not any other mode. I have tried in two different pcs with Windows XP and Windows 8. Phone doesn't even seem to try to boot in those modes, is not like the PC isn't detecting it.
I'm totally lost on how to recover the flashmode functionality to be able to unlck bootloader and install CM, any help will be welcome.
Click to expand...
Click to collapse
You must be doing something wrong.
Flashmode - turn the phone off, connect USB cable to PC, hold down Back button, connect USB cable to the phone. Green LED should light up, then phone is in flashmode.
Fastboot mode - turn the phone off, connect USB cable to PC, hold down Menu/Option button, connect USB cable to the phone. Blue LED should light up, then phone is in fastboot mode.

Nah, it didn't worked. I got it to still a recovery with X-parts app. Booted to the recovery, wiped everything, did a factory restore, since that moment it won't boot at all, Sony logo and it won't power off without taking off the battery. Of course, still won't enter flashmode or flashboot.

madmalkav said:
Nah, it didn't worked. I got it to still a recovery with X-parts app. Booted to the recovery, wiped everything, did a factory restore, since that moment it won't boot at all, Sony logo and it won't power off without taking off the battery. Of course, still won't enter flashmode or flashboot.
Click to expand...
Click to collapse
Did you install the drivers for it? If you want to use either flashtool or fastboot you need to install these programs along with the drivers. Also, ignore the prompt by Sony PC Companion when prompted. If you can boot into ROM, check that USB debugging is enabled.
僕のLT18iから送られてきた

popthosegaskets said:
Did you install the drivers for it? If you want to use either flashtool or fastboot you need to install these programs along with the drivers. Also, ignore the prompt by Sony PC Companion when prompted. If you can boot into ROM, check that USB debugging is enabled.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Drivers installed, USB debugging enabled, tried on two diferent computers.
I have some experience not only in flashing roms but also in rom cooking, kernel compilation, etc... and after all day I couldn't get it to go to flashmode. My girlfriend -she is the owner of the phone- remembered me we already have problems being unabled to access flasmode when she bought the phone and wanted to update it with sony software, so I finally took it to the shop so they can send it to repair service.
Thanks guys for your prompt replies.

[Q] hardbrick repair

Hello,
how to create a semc emergency package for the z1c to unbrick a hardbricked phone by using s1 tool emergency mode? My phone is only detected as semc device (no flashmode, no fastboot, no recovery) and I miss a suitable emergency package (in a former thread it is available for z ultra and z1, but not for z1c). I wood be glad for help

http://forum.xda-developers.com/showthread.php?t=2682255

hardbrick repair
XperienceD said:
http://forum.xda-developers.com/showthread.php?t=2682255
Click to expand...
Click to collapse
Thanks for your thread.
But I spent hours now, to find a method to reanimate my phone. Still I didnt find a suitable semc package or sin_file_set to flash in s1tool.
In other thread I read a hint that maybe I destroyed my trim area. First of all I made a backup of trim area with backupTA program. The backup is a .zip file or .img file. Is there a possibility to restore my phone?

mar10777 said:
Thanks for your thread.
But I spent hours now, to find a method to reanimate my phone. Still I didnt find a suitable semc package or sin_file_set to flash in s1tool.
In other thread I read a hint that maybe I destroyed my trim area. First of all I made a backup of trim area with backupTA program. The backup is a .zip file or .img file. Is there a possibility to restore my phone?
Click to expand...
Click to collapse
Maybe there is some help, when I attach the log files of s1tool and the TA-backup

Which s1tool are you using? Have you tried the one from this post? http://forum.xda-developers.com/showpost.php?p=52139322&postcount=171

zxz0O0 said:
Which s1tool are you using? Have you tried the one from this post? http://forum.xda-developers.com/showpost.php?p=52139322&postcount=171
Click to expand...
Click to collapse
Yes, I tried thisone

mar10777 said:
Yes, I tried thisone
Click to expand...
Click to collapse
I want to give a big thankyou to the_laser, senior member.
He finally solved my hardbrick problem by creating a emergency file, which I could flash in s1tool. The phone is fully alive now!!
Excellent work!!! Most impressed me however his patience with me as quite Noob. Thank you.

Some guidance would be appreciated
mar10777 said:
I want to give a big thankyou to the_laser, senior member.
He finally solved my hardbrick problem by creating a emergency file, which I could flash in s1tool. The phone is fully alive now!!
Excellent work!!! Most impressed me however his patience with me as quite Noob. Thank you.
Click to expand...
Click to collapse
Hi there,
I believe I hard bricked my phone as well (screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash).
However when connecting to the S1 tool Emma from Sony it detects the phone (see below screen shot) and says the bootloader wasn't unlocked. I am pretty sure I have done this. (It is my first attempt to install a custom ROM).
The S1tool in the description below seems not to recognize the device.
After ploughing through some threads and reading about opening the device looking for test points I thought your thread here seems to be more fit for purpose.
I used EasyRootTool and LockedDualRecovery. I also created a back up file with Backup-TA before bricking it. I got this on my other machine and can attach this if needed tomorrow.
Some help and guidance would be very much appreciated.

lefu said:
Hi there,
I believe I hard bricked my phone as well (screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash).
However when connecting to the S1 tool Emma from Sony it detects the phone (see below screen shot) and says the bootloader wasn't unlocked. I am pretty sure I have done this. (It is my first attempt to install a custom ROM).
The S1tool in the description below seems not to recognize the device.
After ploughing through some threads and reading about opening the device looking for test points I thought your thread here seems to be more fit for purpose.
I used EasyRootTool and LockedDualRecovery. I also created a back up file with Backup-TA before bricking it. I got this on my other machine and can attach this if needed tomorrow.
Some help and guidance would be very much appreciated.
Click to expand...
Click to collapse
Another point: in flashtool you can also unlock and lock the bootloader BLU button). (http://forum.xda-developers.com/showthread.php?t=2440597) (http://xperiafirmware.com/8-firmware/46-sony-xperia-z1-compact-d5503) (http://forum.xda-developers.com/showthread.php?t=2642081) (Type in phone *#*#7378423#*#* and go to Service Info => Configuration. If bootloader is unlocked it will say: "Bootloader unlocked: Yes". If it says something else like "Bootloader unlock allowed: Yes", it means the bootloader is locked.). So you can check, if your bootloader is really unlocked

lefu said:
Hi there,
I believe I hard bricked my phone as well (screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash).
I dont believe, that your phone is ahrdbricked. It seems to be a soft brick: screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash.
So, you can boot in flashmode. Use flashtool (latest version 9.18), its a powerful tool. (http://forum.xda-developers.com/showthread.php?t=2658952) (http://www.xperiablog.net/2014/09/0...allows-you-to-download-xperia-firmware-files/) (http://www.flashtool.net/downloads.php) If you have installed flashtool, change to the flashtool folder (C:\flashtool), then drivers, execute the .exe and choose the drivers (fastboot, flashmode and for phone model), then run flashtool. In the links above you can see how to use it. Just boot your phone in flashmode (volume down and usb connecting, run flashtool, click the flash button, choose flashmode and choose a stock rom (which you must download before and copy as .ftf file in the folder firmware in flashtool folder, or type the button device, checkdevice updates, choose your device and download a appropriate stock rom ), then reboot, root yout device again with easyroottool or newroot, reboot in recovery and flash a custom rom. I think it should be possible.
Click to expand...
Click to collapse

mar10777 said:
lefu said:
Hi there,
I believe I hard bricked my phone as well (screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash).
I dont believe, that your phone is ahrdbricked. It seems to be a soft brick: screen stays black, phone vibrates once when keeping the power button pressed, cant get into recovery, volume down button pressed connecting via USB shows green red light flash.
So, you can boot in flashmode. Use flashtool (latest version 9.18), its a powerful tool. (http://forum.xda-developers.com/showthread.php?t=2658952) (http://www.xperiablog.net/2014/09/0...allows-you-to-download-xperia-firmware-files/) (http://www.flashtool.net/downloads.php) If you have installed flashtool, change to the flashtool folder (C:\flashtool), then drivers, execute the .exe and choose the drivers (fastboot, flashmode and for phone model), then run flashtool. In the links above you can see how to use it. Just boot your phone in flashmode (volume down and usb connecting, run flashtool, click the flash button, choose flashmode and choose a stock rom (which you must download before and copy as .ftf file in the folder firmware in flashtool folder, or type the button device, checkdevice updates, choose your device and download a appropriate stock rom ), then reboot, root yout device again with easyroottool or newroot, reboot in recovery and flash a custom rom. I think it should be possible.
Click to expand...
Click to collapse
Woowoop
That was as easy and pleasant as a stroll in the park.
Thanks a lot @mar10777
Click to expand...
Click to collapse

my devices is not booting into flashmode

Qhssub_bulk
Hi Everyone,
My Z1c hard bricked i thing. it is not response switch on, charging and etc.
When i plug it to pc via USB ı can see only QHSUSB_BULK on device manager list.
is it possible to repair it somehow or do ı have tı use as a BRICK anymore ?
Many thanks for help.

Gobizi said:
Qhssub_bulk
Hi Everyone,
My Z1c hard bricked i thing. it is not response switch on, charging and etc.
When i plug it to pc via USB ı can see only QHSUSB_BULK on device manager list.
is it possible to repair it somehow or do ı have tı use as a BRICK anymore ?
Many thanks for help.
Click to expand...
Click to collapse
Hi! Did you have any luck?

[Q] how to enter to flash mode?!

hey everyone
i have a problem with my z1c
i have unlocked the bootloader and changed the rom to cm11
but now i want to back to the stock rom
so i need to boot my device in flash mode but i can't
usb debugging is on and i press the volume down when plug in the usb
but its LED turn green for a moment and then turn off
what should i do?!

semolation said:
what should i do?!
Click to expand...
Click to collapse
Connect when the flashtool tells you to.

XperienceD said:
Connect when the flashtool tells you to.
Click to expand...
Click to collapse
i tried it too
didn't work

semolation said:
i tried it too
didn't work
Click to expand...
Click to collapse
If the led turns green for a second flashmode works, so you're doing something wrong.

Have you turned off the phone before?
USB debugging is irrelevant for entering flash mode.

Could also be a matter of drivers not installed? There are flashmode-specific drivers. There is a folder in Flashtool's folder called "drivers". You can install from there. Choose the Flashmode driver from the list, and also (maybe optional) the one from the list that is for your phone. The fastboot one wouldn't hurt either.
If you are running Windows 8, it may refuse to install these drivers. You can get around that easily... more info about it in this thread: http://forum.xda-developers.com/showthread.php?t=2378530

You probably already know this but I just want to mention it, for the sake of covering all bases..
the screen doesn't turn on when your in flashmode, it stays black.
The led should stay on but the screen doesn't.

I have the very same problem. Nothing helps. I have tried win7, 8 with no luck. bypassed the problem by creating own flashable zips

[Q] I have accidentally wiped system with TWRP and now the phone won't boot... :(

Hi All,
My phone was shutting itself down yesterday for no reason, so I boot into TWRP, thinking I should do something there, maybe restore to a previous backup, or wipe cache, etc...
I was in a hurry to go to the game (GO WARRIORS!), so I was just trying to get the phone ready for the game...
I tried the "Regular" wipe, and when it didn't work, I went into advanced wipe, and chose system wipe and REBOOT the phone (BAD IDEA!)....
so now my phone won't go past the SONY logo, because there is no system to boot into
What can be done here? Flashtool won't recognize my phone, and kept telling me I need to install the correct driver, and I can't boot into recovery.
Any help is much appreciated! Thanks!

Try connecting your phone to Sony PC companion it has all the device drivers. It may not recognize your phone when you connect it but proceed to the update/renew tab and follow the on screen prompts.

Nope ,won't connect, it turns on for like 1 second when the cable is plugged in... then it turns off again
is there any other way?

Connect it with fastboot.
To do this, hold the volume up button while connecting it with your PC, the LED will go blue.
Now you can either flash a rom via flashtool, repair it with PC Companion, or emma.
But since you have TWIRP, I would guess PC companion won't help you. You will likely also whipe all your backups stored on the phone by doing this, unless they're on the SD card, but that's better than having no phone at all.

,,,
1) install flash tool by androxyde
2) open the flash tool.
3) click thunder button and select flashmode.
4) connect your phone via usb (if message: device status no found [is ok])
5) press reset button 30 seconds( 1 vibrate and again 3-4 vibrates)
6) and now your phone is connected via flashmode.
7) Download original rom and put in any folder. [PM ME IF NOT HAVE ORIGINAL ROM .ftf]
8) Select "any" folder in source folder firmware selector
8) Press flash and wait.

sasu22 said:
1) install flash tool by androxyde
2) open the flash tool.
3) click thunder button and select flashmode.
4) connect your phone via usb (if message: device status no found [is ok])
5) press reset button 30 seconds( 1 vibrate and again 3-4 vibrates)
6) and now your phone is connected via flashmode.
7) Download original rom and put in any folder. [PM ME IF NOT HAVE ORIGINAL ROM .ftf]
8) Select "any" folder in source folder firmware selector
8) Press flash and wait.
Click to expand...
Click to collapse
I was able to flash "C6506_10.6.A.0.454 R2E_Customized US" to the phone, however ,after the process is done, it still won't get past the SONY screen.
Xperia shows underneath SONY logo this time though, so something was done to the phone.

ohhh
go to service gsm, maybe your motherboard/sd memory is die.

ah_hin said:
Hi All,
My phone was shutting itself down yesterday for no reason, so I boot into TWRP, thinking I should do something there, maybe restore to a previous backup, or wipe cache, etc...
I was in a hurry to go to the game (GO WARRIORS!), so I was just trying to get the phone ready for the game...
I tried the "Regular" wipe, and when it didn't work, I went into advanced wipe, and chose system wipe and REBOOT the phone (BAD IDEA!)....
so now my phone won't go past the SONY logo, because there is no system to boot into
What can be done here? Flashtool won't recognize my phone, and kept telling me I need to install the correct driver, and I can't boot into recovery.
Any help is much appreciated! Thanks!
Click to expand...
Click to collapse
If you use Windows 8, you must disable driver signature before installing flashtool, for this, hold shift key while restart your computer, enter in the proper settings and choose "disable signature driver", after this, install flashtool, then go to its folder and find folder driver and install the Xperia Z family driver. After these processes your phone will be recognized by flashtool
Sent from my Xperia ZL using XDA Free mobile app

sasu22 said:
go to service gsm, maybe your motherboard/sd memory is die.
Click to expand...
Click to collapse
Krllo said:
If you use Windows 8, you must disable driver signature before installing flashtool, for this, hold shift key while restart your computer, enter in the proper settings and choose "disable signature driver", after this, install flashtool, then go to its folder and find folder driver and install the Xperia Z family driver. After these processes your phone will be recognized by flashtool
Sent from my Xperia ZL using XDA Free mobile app
Click to expand...
Click to collapse
Try what @Krllo said if u have windows 8.& if u have 'Bluestack or any other android thing instlled ,unistall it.Install drivers from flashtool folders.Install them via selecting ANYWAY.
Try to reflash Kitkat.& if doesn't work I am afraid you got the issue which @sasu22 said.
I had sasme issue.Stuck @ sony logo.Seems something gets damaged.

dev neo said:
Try what @Krllo said if u have windows 8.& if u have 'Bluestack or any other android thing instlled ,unistall it.Install drivers from flashtool folders.Install them via selecting ANYWAY.
Try to reflash Kitkat.& if doesn't work I am afraid you got the issue which @sasu22 said.
I had sasme issue.Stuck @ sony logo.Seems something gets damaged.
Click to expand...
Click to collapse
My Phone is stuck on Sony Logo and rebooring again and again. With Fastboot I am getting simlock.ta file warning. After that phone is useless as of now. Do you recommend anything?

Krllo said:
If you use Windows 8, you must disable driver signature before installing flashtool, for this, hold shift key while restart your computer, enter in the proper settings and choose "disable signature driver", after this, install flashtool, then go to its folder and find folder driver and install the Xperia Z family driver. After these processes your phone will be recognized by flashtool
Sent from my Xperia ZL using XDA Free mobile app
Click to expand...
Click to collapse
dev neo said:
Try what @Krllo said if u have windows 8.& if u have 'Bluestack or any other android thing instlled ,unistall it.Install drivers from flashtool folders.Install them via selecting ANYWAY.
Try to reflash Kitkat.& if doesn't work I am afraid you got the issue which @sasu22 said.
I had sasme issue.Stuck @ sony logo.Seems something gets damaged.
Click to expand...
Click to collapse
anshumangoyal said:
My Phone is stuck on Sony Logo and rebooring again and again. With Fastboot I am getting simlock.ta file warning. After that phone is useless as of now. Do you recommend anything?
Click to expand...
Click to collapse
I couldn't get it fixed, so I bought a Z3 Compact, great phone, way faster than the ZL.

anshumangoyal said:
My Phone is stuck on Sony Logo and rebooring again and again. With Fastboot I am getting simlock.ta file warning. After that phone is useless as of now. Do you recommend anything?
Click to expand...
Click to collapse
Does your phone start to home screen when you put in AC charging from wall socket?
I think you mean Flashmode...If you didn't try flashmode.Install needed drivers from flashtool folder.Connect you phone in flashmode (volume down+cable into).disconnect it.
load ftf-exclude any .TA files if you r not locked to any carrier.--click on 'No final verification'.
flash and connect when asked when displays .Hope it helps.Keep us updated.
ah_hin said:
I couldn't get it fixed, so I bought a Z3 Compact, great phone, way faster than the ZL.
Click to expand...
Click to collapse
Nicely done.But if i were you i would never go with Sony once again.You will see what i am talking about.

brick after format data

Hello,
I think I bricked my phone
I wanted to upgrade from 4.4.2 to Lollipop http://forum.xda-developers.com/sony-xperia-z1-compact/general/stock-14-6-1-236-customized-lollipop-5-t3264557
And before that I did a factory reset and format data (I got some issues on my phone and wanted to get rid of them).
Now I can not enter TWRP, I can not enter any thing. At the time beeing, after many restarts my red button is broken, I switch it off by "Power/Vol+". When I connect USB or push Power it starts and showing "SONY"-Logo, and that's it.
I can not enter flash-mode by swith off, hold Vol- and connect USB :crying:
What can I do to revive my Z1c?
Thanks for advices
BerWatch!

BerWatch said:
Hello,
I think I bricked my phone
I wanted to upgrade from 4.4.2 to Lollipop http://forum.xda-developers.com/sony-xperia-z1-compact/general/stock-14-6-1-236-customized-lollipop-5-t3264557
And before that I did a factory reset and format data (I got some issues on my phone and wanted to get rid of them).
Now I can not enter TWRP, I can not enter any thing. At the time beeing, after many restarts my red button is broken, I switch it off by "Power/Vol+". When I connect USB or push Power it starts and showing "SONY"-Logo, and that's it.
I can not enter flash-mode by swith off, hold Vol- and connect USB :crying:
What can I do to revive my Z1c?
Thanks for advices
BerWatch!
Click to expand...
Click to collapse
Do you have adb / fastboot on your computer?

levone1 said:
Do you have adb / fastboot on your computer?
Click to expand...
Click to collapse
Yes, I have, but can not enter my phone/don't know how to enter.
I tried switch off (by Power and Vol+), holding Vol- (the same with Vol+) and plug in USB - it starts by showing red light for 2 sec than "SONY", and than stps - no vibration, no light, only steady "SONY"
cmd shows: D:\Programme\Android-Tools\ADB>adb reboot recovery
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot recovery
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot bootloader
error: device not found
Phhu, hopefully I do something wrong?!

Install these:
http://developer.sonymobile.com/downloads/drivers/xperia-z1-compact-driver/
and try again

BerWatch said:
Yes, I have, but can not enter my phone/don't know how to enter.
I tried switch off (by Power and Vol+), holding Vol- (the same with Vol+) and plug in USB - it starts by showing red light for 2 sec than "SONY", and than stps - no vibration, no light, only steady "SONY"
cmd shows: D:\Programme\Android-Tools\ADB>adb reboot recovery
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot recovery
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot bootloader
error: device not found
Phhu, hopefully I do something wrong?!
Click to expand...
Click to collapse
Power off by holding power and volume up, just wait until it turns off. When it's totally shut off, just hold volume up while plugging in cable and don't let go of volume until you see blue led. Then you're in fastboot mode. If you have drivers installed, it's very easy to get into recovery from there. Report back.

If everything fails...
Install Flashtool on your PC, install the necessary drivers (flashtool helps you with that), download the current firmware in .ftf format and apply it with Flashtool to your phone.
No worries, we all were at your point sometime but you can always recover

Thanks for your hints, folks!
I'll try them tomorrow and give feedback than.

Happened to me once.. Accidentally wiped my data..
Only thing I managed to do is reinstall kk via flashtool
Xperia Z1 Compact .386 rooted

...nothing works.
I have almost everything installed: adb.exe (800kb from 25.07.2013), fastboot.exe (157kb from 25.07.2013), Flashtool (Version 0.9.14.0 built on 12-02-2014 22:45:00), Xperia Companion (Vers. 1.1.24.0), Z1 Compact drivers (device manager says: Sony sa0109 ADB Interface Driver Vers. 2.0.10.30018 from 13.05.2013).
Nothing can connect my Win10-PC via USB3.0 to my phone, it always starts (when I connect it to USB by holding wether Vol+ or Vol-) with red (...pink?) light for about 4sec, followed by showing "SONY" - end of anything.
I'm desperate :crying:

Do you get the green led light when connected in flash mode (vol down when connecting)?
Xperia Z1 Compact LP .386 rooted

No, only red light, than "SONY" without any vibration...
May it be, that usb-debugging was off, whenn I did format data?

BerWatch said:
No, only red light, than "SONY" without any vibration...
May it be, that usb-debugging was off, whenn I did format data?
Click to expand...
Click to collapse
I don't think it's related..
Maybe you don't have the right drivers on pc?
Xperia Z1 Compact LP .386 rooted

The fastboot or flashmode mode should always work - regardless of what you did regarding ROMs or setting or wipe etc.
It is there to save your phone if you messed up.
It is strange that you cant enter these modes. Normally its really a driver issue and you PC does not recognize your phone.
But it seems that you have tried installing them already.
Just to make sure... Your phone charges normally when you plug it in right? So it cant be a broken cable or broken micro-USB connection on your phone?
Also make sure your phone is really shut down - try resetting it with the red button next to your SIM-card slot.
Your volume buttons were fine before right?

Schlengge said:
The fastboot or flashmode mode should always work - regardless of what you did regarding ROMs or setting or wipe etc.
It is there to save your phone if you messed up.
It is strange that you cant enter these modes. Normally its really a driver issue and you PC does not recognize your phone.
But it seems that you have tried installing them already.
Just to make sure... Your phone charges normally when you plug it in right? So it cant be a broken cable or broken micro-USB connection on your phone?
Also make sure your phone is really shut down - try resetting it with the red button next to your SIM-card slot.
Your volume buttons were fine before right?
Click to expand...
Click to collapse
BINGO!!! ...the usb-cable, it's a pretty new one, but I know, the Z1c doesn't like every cable
Now I can enter Flashtools flash and fastboot mode.
I think I lost almost everything on my Z1c, even my TWRP, don't I?
What is now for noobs like me the best way to install this? http://forum.xda-developers.com/sony-xperia-z1-compact/general/stock-14-6-1-236-customized-lollipop-5-t3264557
Many Thanks!

Flash kitkat, root with pc, install twrp recovery, and flash lp rom from recovery
Xperia Z1 Compact LP .386 rooted

Oreltub said:
Flash kitkat, root with pc, install twrp recovery, and flash lp rom from recover/QUOTE]
...uuumpf, but thanks!
Does kiktkat mean 14.4.A.0.108 Android 4.4.4?
Click to expand...
Click to collapse

Yes
Xperia Z1 Compact LP .386 rooted

Thank you all for your input!
It was the usb-cable which did load my Z1c and in this case (no other data on the phone) light the purple LED and display the "SONY"-logo - but nothing else!
All the future problems are more on the software-side (my head) than on the hardware (the cable)...

Haha glad you sorted it out. I don't know why but I also have USB cables in my collection that just won't work with my Z1C... But now you know
If you need further help in restoring with flashtool you can also look up this thread for some helpful links : http://forum.xda-developers.com/showthread.php?t=2631291
Try to get your hands on a .108 firmware (I always keep one on my PC in case I f*** up ). They are easy to root with EasyRoot and from there you can flash dualrecovery. With TWRP you are good to access your backups or flash anything you want again.
Sent from my D5503 using XDA-Developers mobile app

Schlengge said:
Haha glad you sorted it out. I don't know why but I also have USB cables in my collection that just won't work with my Z1C... But now you know
If you need further help in restoring with flashtool you can also look up this thread for some helpful links : http://forum.xda-developers.com/showthread.php?t=2631291
Try to get your hands on a .108 firmware (I always keep one on my PC in case I f*** up ). They are easy to root with EasyRoot and from there you can flash dualrecovery. With TWRP you are good to access your backups or flash anything you want again.
Sent from my D5503 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks - I'll give a feedback when i'm through!