I have a TracFone (Straight Talk) Sprint Samsung Galaxy S3 variant. (SCH-S960L d2tfnspr) Whenever I used a custom ROM made for Sprint devices LTE/Data and/or MMS never worked properly. This is because the APNs the SCH-S960L uses differs from the standard Sprint APNs. It was extremely difficult trying to figure out what the APNs were since the TracFone APNs floating around on the internet are for Straight Talk BYOP. (AT&T and T-Mobile)
Finally I discovered a solution. Someone else in my household uses the same model phone but theirs is on stock TouchWiz. Using APN Backup and Restore I backed that phone's APNs.
Now for what I did after backing up the working APNs and for you need to do to fix your phone. You're ROM must support root access. While I'm not quite sure I believe you also need a custom recovery. (You probably have one already since you flashed your custom ROM) So I would recommend using CWM or TWRP. This may be necessary to convert a user app into system app.
Once you have this download the file I've attached. Do not rename it since the app you will be using requires it to be named that way. Go to the Play store and download HiAPN. You will need to give it root access and make it a system app. It will prompt you to do so. The reason it needs all these permissions is to access the APNs. Once you've done this use the restore feature and select the file. The file you downloaded must be in the folder for HiAPN. ~/HiDroid_Net/HiAPN Once this completes, check that the Network Mode in your settings is set to LTE/CDMA/EvDo. HiAPN may change it to a GSM mode which is incorrect. Then just go ahead and restart your phone. The final step is demote HiAPN and remove it if you choose to. It's requesting many permissions and it's partially in a foreign language. (What you need to do is in English) You can use an app like Titanium Backup to remove it since you can't the normal way because it's currently a system app.
I truly hoped this helped you since it helped me. Feel free to ask questions and I will answer them to the best of my knowledge.
Download Link:
https://dl.dropboxusercontent.com/s...AEA1_EegEUyZ2qJCfOUGVYhYgBMRcEExkIoI7ySne3rMg
-SirBenjamin
Sent from my SCH-S960L using Tapatalk
Is it safe to use and install xposed on sprint galaxy s3 sch-s960l?? If is where could i fine modules for my phone? Cant find any!
SLUDER4 said:
Is it safe to use and install xposed on sprint galaxy s3 sch-s960l?? If is where could i fine modules for my phone? Cant find any!
Click to expand...
Click to collapse
This thread has nothing to do with your question, mate. But you can install Xposed on any rooted phone. After you install it, the Xposed app will have a list of modules, although not all modules will work with all phones. Nandroid backup before anything.
Recovery FLASHABLE version now posted near the bottom of the first post of the 3Minit Battery Mod for Conquest-Singularity and both Stock ND8 and NDC with 1000+ animated battery icons..
[BATTERY] Plasma Battery! ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v7.0, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
I can't find hiApn
Sent from my SCH-S960L using XDA Free mobile app
Related
ok, most of you might think what is this good for, i like to have the arabic language on a samsung rom, not a cyangenmod rom or anything like that ,
this is also good for many languages. SCREENSHOTS OF LANGUAGES BELOW, and its good for you people who have switched from att to t-mobile, and want better service,
i live in iraq. so i dont use either, so lets start on how this works , we will be using I747UCDLK3 rom for this tutorial, because its the only rom i have tested
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THINGS YOU WILL NEED
A ROOTED T-MOBILE T999
MOBILE ODIN PRO
THE I747UCDLK3 ATT STOCK PREROOTED ROM
AND THE UVLJA MODEM FOR T-MOBILE
Language Enabler by Wanam
How to
step 1: move the att rom to the internal sd card
step 2: open mobile odin, and download needed files from the app. then choose "open file" choose the rom tar.
step 3: press flash firmware then and all wipes
step 4: after it boots up you will have no imei, not to worry, open mobile odin and this time choose "OTA / Update zip" and choose our downloaded modem, then flash with no wipes
step 5: then after it boots up install Language Enabler, and press menu and choose save after granting root rights
step 6: enjoy
This is cool. But why not just flashing any att rom and just changed the build.prop from d2att to d2tmo? I have done it multiple times with no issues and flashed em out of the box
gypsy214 said:
This is cool. But why not just flashing any att rom and just changed the build.prop from d2att to d2tmo? I have done it multiple times with no issues and flashed em out of the box
Click to expand...
Click to collapse
that will only work with aosp and cyangenmod roms, and this is how you can get the samsung rom on your phone
cabloomi said:
that will only work with aosp and cyangenmod roms, and this is how you can get the samsung rom on your phone
Click to expand...
Click to collapse
I have flashed pretty much every TW base roms from att out of the box and it works. And just changed build.prop with root explorer.
And AOSP roms flash good sometimes need to change the updater.scrip
How about the modem?? how will that work
cabloomi said:
How about the modem?? how will that work
Click to expand...
Click to collapse
AT&T Galaxy S3 is the same 99% hardware than the T-Mobile Galaxy S3. Same as the Sprint and Verizon S3's.
Porting CDMA Galaxy s3 needs to do more work other wise you will have bugs but it will still boot.
But its been done several times and like I said I have flash several TW roms to my T-Mobile S3 out of the box with no problems at all.
i concur.... but thanks for sharing.
anytime
Besides bro, flashing a rom doesn't change ur modem, unless it's included in the rom zip and devs don't do that unless it's a firmware update for that particular carrier and comes with it. Most separate rom from modem even then..but thanks for trying to contribute to us all
sent from a Galaxy far far away...
First off, I apologize for posting this in the T-Mobile section, but there is not a TracFone S4 section so I'm posting it here in hopes that other pre-paid S4 users will find this. I've managed to root, install custom recovery, and flash a T-Mobile rom to my TracFone S4.
Basically, what I've done is tricked the phone into believing it's a T-Mobile version and installed the TMo TWRP. I've tested this on a SGH-S970G without issues. I don't have service on it yet. I'm hoping to find an unlock (with the help of others) and be able to use this on other GSM networks.
I'm not responsible for what you do but if you'd like to try it, here's the steps:
Root your phone. I used Kingo Root - http://forum.xda-developers.com/showthread.php?t=2473747
Change your build.prop so that it reads as a T-Mobile S4. I used Root Explorer to navigate to /system/build.prop. Change:
ro.product.model to "SGH-M919"
ro.product.name to "jfltetmo"
ro.product.device to "jfltetmo"
Remove the quotations.
Reboot your phone so the changes will take place.
Install GooManager from the Play Store. Click menu, "Install OpenRecoveryScript", and "Yes" on the menu prompt. Your phone will download TWRP Recovery and flash it to your phone.
Click Reboot Recovery in Goo Manager and make a backup of your stock rom.
Download a TW Based 4.3 T-Mobile rom. Here's a stock deodexed one that seems to work nicely - http://forum.xda-developers.com/showthread.php?t=2545711
Enjoy your awesome phone!
I've also tried to install a T-Mobile and/or AT&T radio without luck. Here's that thread - http://forum.xda-developers.com/showthread.php?t=2324667.
I've tried flashing the radio through Odin, Mobile Odin, and TWRP. The Odin flashings fail and the TWRP seems to flash successfully but when I reboot, the old modem is still there. Using this tutorial, I've also pulled the modem for anyone who'd like to try to modify it or otherwise figure out how to change modems on this phone.
https://dl.dropboxusercontent.com/u/21738380/modem.bin
https://dl.dropboxusercontent.com/u/21738380/NON-HLOS.bin
I'm attaching a screenshot of my current build status.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hopefully, we can stir some development for the SGH-S970G!
Update - I flashed a 4.2.2 rom and was able to access the hidden menu per this article - http://forum.xda-developers.com/showthread.php?t=2283068. At step 6, [3] PERSO SHA256 OFF is not there. I don't think this phone is unlockable.
Sent from my SM-N900V using Tapatalk
I have succesfully unlocked this phone
im working on a tutorial so as soon as its done ill post it on xda, thanks.
robhuffster said:
im working on a tutorial so as soon as its done ill post it on xda, thanks.
Click to expand...
Click to collapse
What is your progress with this?
---------- Post added at 02:03 PM ---------- Previous post was at 01:48 PM ----------
http://forum.xda-developers.com/showthread.php?t=2763160 ??? Try that?
Who is in to flash this bad boy like was done to the tracfone s2. I have a strong believe it can be done.
can you post how you unlocked this phone?
Thanks!
Shanghai.Knight said:
can you post how you unlocked this phone?
Thanks!
Click to expand...
Click to collapse
You can't fully unlock this phone. Even with unlock code after the phone restarts you have to enter the code again. The radio does not allow it to be permanent. TracFone would need to either upgrade or apply some sort of firmware update to allow the phone to accept the unlock permanent. I've tried is 100% pure stock and still does the same thing. You are able to use normal but as soon as you restart is locks again. January 2015 is fast approaching, so am waiting as to what TracFone will do to fix this issue, otherwise people are going to complain.
i take no credit but the "wifi tether router" app works fine with the same adjustments in the configure option. need help just ask
Or you could just use the native one-http://forum.xda-developers.com/showthread.php?t=2224083
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hotspot not working
bilgerryan said:
Or you could just use the native one-http://forum.xda-developers.com/showthread.php?t=2224083
Click to expand...
Click to collapse
I am on a stock unrooted ND8 4.4.2 rom. Tried to update the odex version from my external sd card and it failed. I checked the MD5 and it is correct but the error message is that the "footer Is wrong" and "signature verification failed". What am I doing wrong or does the native hotspot odex file not work with a stock unrooted ND8?
Aussie44 said:
I am on a stock unrooted ND8 4.4.2 rom. Tried to update the odex version from my external sd card and it failed. I checked the MD5 and it is correct but the error message is that the "footer Is wrong" and "signature verification failed". What am I doing wrong or does the native hotspot odex file not work with a stock unrooted ND8?
Click to expand...
Click to collapse
You have to be rooted and using a custom recovery like Philz to flash the hotspot mod or anything else but an official update.zip made to work with the stock recovery.
Use Odin on a PC to flash the latest Philz recovery tar.
Technically, you could flash it with just a custom recovery without being rooted, but someone else would have to answer (or you'd have to test) if it would actually work without being rooted.
You should proudly ask this in the mod's thread.
Sent from my Sprint Samsung Galaxy SIII with M.O.A.R. v9.0, dkp kernel dated 3/20/2014 and TWRP v2.7.0.0.
thanks
Thanks for the quick response... I rooted and applied the hotspot mod and everything is working great now.
bobbyjohnson said:
i take no credit but the "wifi tether router" app works fine with the same adjustments in the configure option. need help just ask
Click to expand...
Click to collapse
I've been using PDANET+ FoxFi without a problem. 4.4.2 Stock Rooted.
Which adjustments in the configure option need to be made? I installed the app and am rooted, the app loads and says a network is set up, but doesn't show up anywhere. Thanks
Rasmusuperfan said:
Which adjustments in the configure option need to be made? I installed the app and am rooted, the app loads and says a network is set up, but doesn't show up anywhere. Thanks
Click to expand...
Click to collapse
You could just use the native one in the second post, no setup needed. Just flash and go.
bilgerryan said:
You could just use the native one in the second post, no setup needed. Just flash and go.
Click to expand...
Click to collapse
I was looking at using an app like that because I am nervous of making a mistake because I have never flashed or used a custom recoery. I'll look into it more thanks.
Rasmusuperfan said:
I was looking at using an app like that because I am nervous of making a mistake because I have never flashed or used a custom recoery. I'll look into it more thanks.
Click to expand...
Click to collapse
Just grab the Philz recovery that ends in ".tar" and use Odin to flash it.... Or you can just extract the services.jar from the Hotspot mod and replace yours with it with a root browser, set permissions and reboot.
KNOX-FREE SCRIPT -> SAFELY REMOVE KNOX FROM YOUR STOCK N4 LOLLIPOP 5.1.1 -> TEKHDway!
SAFELY REMOVE KNOX FROM YOUR STOCK N4 LOLLIPOP 5.1.1
FLASHABLE ZIP THRU TWRP
KNOX-FREE_TEKHD.zip
https://www.androidfilehost.com/?fid=24052804347792751
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Q: Hey TEKHD, Does this work with Android 5.0.1?
A: Probably... but I haven't tested it on 5.0.1...
Q: Hey TEKHD, but I think I still have Knox after flashing the file...!
A: I never completely remove Knox... I simply disable it in a way that it does not affect the OS in any negative way.
> > > I just ask for a simple . . .
FYI: for those of us using dark themes, the blue colored text is unreadable.
Thank you. You're the best.
Sent from my SM-N910T3 using XDA Free mobile app
im flashing this as soon as i get root thanks
Short of a Nandroid restore, is there a .ZIP to flash that backs this out?
Also, has anyone tried this on v5.0.1?
Sent from my Note 4 with Tapatalk
Thanks, worked great on the N910T3 on 5.1.1
I don't get this actually. what do I benefit of disabling Knox ? can I install TWRP and flash a rom without knox detecting it now ?
Link doesn't work anymore. How does one find the .zip for disabling Knox? Is rooting possible if that second to last step is done a different way?
don't care for knox since i have no need for it. thank you!
Can I use this on a Samsung Galaxy J5 with stock 5.1.1 ?
Does this also work on a Note 3 Neo with stock 5.1.1 ?
Thanks ? ??
Please can i use it on my note edge 6.0.1?
I have Edge S7 T-Mobile with TitaniumBackup Pro vs.7.5
I have first backed up and froze and then completely uninstalled blow listed packages. I after freezing Knox, I found out through the GSam that all or some were still running behind the scenes. As you are aware, Knox is an enterprise security system that impacts the overall performance and slows the system down. It also has a significant impact on the battery consumption and battery life.
I am not responsible for your actions and if you do so, make sure you know what you are doing. Make a complete backup of your system before doing making changes via TWRP. I have downloaded ‘Stock Edge S7 SM G935 T ROM (G935TUVU3APG1)’ from https://samsung-firmware.org/ prior to doing this due to the fact that TWRP does not support Snap Dragon yet. Moreover, I have SOFT BRICKED my phone at my 1st trial !!!
p.s. Your version numbers might be different from mine. I uninstalled these files two weeks ago. Also, you might have different packages based on your provider's settings.
SOFT BRICKED: I have forgotten to freeze the “Frozen” apps, listed below prior to uninstallation of Knox and Kies
Uninstalled com.samsung.android.bbc.fileprovider
Uninstalled com.samsung.knox.knoxtrustagent
Uninstalled com.samsung.knox.kss
Uninstalled com.sec.enterprise.knox.attestation.1.0.2
Uninstalled com.sec.knox.enterprise.knox.shareddevice.keyguard
Uninstalled com.sec.knox.bluetooth
Uninstalled com.sec.knox.containeragent.2
Uninstalled com.sec.knox.shortcut.sms
Uninstalled Kies Application BnR 1.0.17
Uninstalled KNOX SetupWizardClient2.6.04001002
Uninstalled KnoxAppsUpdateAgent2.6.04001008
Uninstalled KnoxFolderContainer2.6.04001002
Froze Security policy updates1.4.69
Froze Security storage1.0.01
Froze SecurityLogAgent4.3.34
Froze SecurityManagerSercive1.2.8
galaxy tab 2
Hello! I want to disable knox for a galaxy tab 2 (SM-T851Y)... Do you know where I can find for my model?
So last week my note started to receive the networksystemprovider error and the only way I can get it to stop popping up every 5 seconds is to freeze it, but then I cannot receive any text. So I was hoping to just update the phone but it has been so long since I did anything to it I am very confused on how.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is what my phone is currently running and I do have TRWP installed. Any help would be greatly appreciated. Thanks
Sent from my SM-N910P using Tapatalk
What are you currently running? Stock rooted OG5 with initial release of Beastmode?
You should remove ItsOn if running custom kernel- unless you know how to remove it. I've seen ItsOn try to repeatedly to activate itself- but can't with custom kernel. It prompts or forces reboots with no end after the user factory resets in recovery when leaving fragments of ItsOn in internal memory.
I don't know what you want to do but there's many choices:
If you're looking for customization on lollipop, checkout Moar 2.1b One day marshmallow will have a ported ROM of this caliber or better.
If you're looking for stability and maybe something a bit faster, try a marshmallow custom ROM.
Just a couple of examples. Find a ROM and follow the OP install instructions closely. That most likely means using the stock tar flash in Odin to update to suggested update and turning off automatic updates before the update nag starts. But don't go back any farther than OG5 with Odin; the bootloader won't allow the older stock tars to flash.
I was actually to go to stock marshmallow but with root like I have know. I have never been really into trying all the different roms I just want to have root for the Hotspot. I tried to look through the thread but I just get more confused.
Sent from my SM-N910P using Tapatalk
swiftyfrommi said:
I was actually to go to stock marshmallow but with root like I have know. I have never been really into trying all the different roms I just want to have root for the Hotspot. I tried to look through the thread but I just get more confused.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Which thread is confusing? Hotspot, update and root (aka stock tar thread in general forum) or custom ROM threads?
Which hotspot method are you using or prefer? I believe the non root method requires a do over on each boot. Don't use much at all but I prefer permanent myself for the other benefits custom services.jar provides.
That network error is caused by ItsOn not being fully removed and the custom kernel not supporting it. If you use stock kernel, you could leave ItsOn intact but some consider it a privacy and battery liability: unneeded bloat and potentially problematic.
Sent from my SM-N930P using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2941853
This is how I got the Hotspot to work. So all I need help with is updating from lollipop to stock marshmallow. Is it just downloading the rooted stock marshmallow and use Odin to install?
Sent from my SM-N910P using Tapatalk
swiftyfrommi said:
http://forum.xda-developers.com/showthread.php?t=2941853
This is how I got the Hotspot to work. So all I need help with is updating from lollipop to stock marshmallow. Is it just downloading the rooted stock marshmallow and use Odin to install?
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Yes.This thread should get you started with that.
http://forum.xda-developers.com/showthread.php?p=63868221
Sent from my SM-N930P using Tapatalk