Related
I came upon this device on Christmas (a gift from my girlfriend to her father) and wanted to root it and also install clockworkmod recovery, so I could mess with it a bit without bricking it. Since I found a lack of tailored guides for it, I decided to write this one, although I really did no actual development whatsoever. Normally I would be posting this on general, but given the spirit of this forum, I guess I'll just leave it here. Also, keep in mind I don't have the device anymore and am writing this from memory. If I missed anything or you have any doubts, please let me know (for example, I can't recall specifically the drivers I installed to make it work properly).
Please, please read the whole guide before trying anything, and if you are a novice user, just leave this be, I don't want you to turn your tablet into a paperweight because of my shoddy instructions written from memory and you probably don't need any of this anyway as there are no custom roms yet.
!!!DISCLAIMER!!!: As stated above, anything you do is at your own risk. I provided the procedures that worked for me on a Qilive 97r tablet, which is an Auchan branded ARCHOS 97b Platinum HD, so my step by step should work for all of you. There are probably easier ways to do this, and I hint at them in the guide, but beware I have not tried them and cannot vouch for them. In fact, I cannot and will not take any responsability if you brick your device following these instructions, correctly or otherwise. You do this at YOUR OWN RISK. You have been warned!
Rooting:
I followed this guide on Windows 7 x64 and it worked perfectly.
So thanks to dhigby for that. I would just like to make a couple of remarks:
When you get to step 7 (Installing Superuser by ChainDD), don't. Install SuperSU by Chainfire instead, Use it to update the superuser binary (I think a prompt shows up) and when asked, let it delete the "other" superuser applications, that is, the chinese one. Clean and easy, you don't need to follow any more steps.
Congratulations, you now have (english language) root!
Clockworkmod Recovery:
There is no specific recovery for this device. Fortunately, thanks to AndroTab.info, there's a generic version for 3188 devices that you'll see should work quite nicely, albeight with some caveats.
What works:
Nandroid backup to/from external SDCard (won't recognize internal)
Installing zip files should also work, although I didn't try it at the time, as the device wasn't mine and I can't since I don't have it anymore, but since it mounts system partitions perfectly well I wouldn't think there would be a problem. Try it at your own risk though.
Other things probably work, give it a try.
What doesn't work:
Internal SDCard access
Probably other things
Installation:
Now that you have a rooted tablet, installing clockworkmod recovery is easy-peasy. Go to developer options and enable USB Debugging, then make sure you have a working adb daemon (look it up) that recognizes your tablet.
NOTE: I'm not sure if I had to install any specific drivers for this to work, I think if so they were installed while rooting by the chinese app. Anyhow, here's the Rockchip drivers, you might want to try to install them if you can't get a connection: http://www.rockchip.nl/downloads/
Download the file RK30GENERIC_CWM.zip from here - that's the recovery.
Now extract flash_image and recovery.img from the downloaded file above to the folder where you have your adb and follow the following commands.
Push the files to /dev partition on the device:
Code:
adb push flash_image /dev/
adb push recovery.img /dev/
Then enter root shell, like so:
Code:
adb shell
su
Now flash recovery.img into recovery partition with flash_image:
Code:
chmod 755 /dev/flash_image
/dev/flash_image recovery /dev/recovery.img
Now power off your device. To enter recovery press volume down then the power button and keep them pressed until CWM boots. Voilá!
NOTE: The instructions above were adapted from here and all credit goes to AndroTab.info ; I posted these particular instructions because they are the ones I used and worked for me; there are other methods listed on that page which might or might not work, TRY THEM AT YOUR OWN RISK.
Backing up your original recovery (for warranty, if anything goes wrong, etc.)
To obtain a backup image of your recovery \ restore it back afterwards, follow this guide here. All credit goes to Originalas.
Don't follow it to the letter though: first and foremost, you need a working linux installation. If you don't have one, I recommend Wubi.
Then:
Follow step 1;
Ignore step 2 (it's outdated);
Follow 3;
Follow 4 - but don't expect the screen to turn on, it won't, just hold the volume down button for 10 seconds or so after plugging it in, don't press the power button!
Ignore 5, 6 and 7
Follow 8, but don't use the last command to flash the CWM recovery onto the device. This is because since it is a generic version, it relies on the original recovery kernel. Flashing the image like stated in step 8 would probably overwrite the kernel and result in no recovery at all (I might be wrong about this).
Do follow the last command to restore your own backup if you ever need to.
I am unsure if recovery dumps obtained in this way are device specific; I don't see a reason why they should be, so I'll provide you with my own backup:
ORIGINAL RECOVERY
Flash through any method of your choice, but keep in mind I haven't tried this on other devices, so, as you know by now DO IT AT YOUR OWN RISK.
Closing remarks:
There you have it. Sorry for not holding your hand through every step, but this is meant for people who know a bit of what they're doing, making it faster than having to look up and figure out all these things and quirks on their own. If you have any doubts don't hesitate to ask, but keep in mind I don't have the device anymore and don't know much more than what I have written here. I do appreciate feedback and corrections, and will gladly change the guide giving you full credit - if it's really urgent just PM me, I might not check this thread often.
Cheers!
thanks, works like a charm...do you have any news about updates\custom roms? I can't find anything even in the archos main site
Jammed_Death said:
thanks, works like a charm...do you have any news about updates\custom roms? I can't find anything even in the archos main site
Click to expand...
Click to collapse
I wouldn't keep my hopes up on custom roms. The software is really bad and what it does with the hardware is terrible. It's like a bunch of chipmunks put the code together by randomly typing into a keyboard.
That said, the likelihood of a new kernel to fix that is next to nil. However, since the ROM is as far as I can tell pretty near stock, you can get a pretty good experience from the device by installing gravity box xposed module. I also recommend trickstermod and changing the governor to performance, as well as some kernel tweaking if you know what you are doing.
Also, very important, limit the amount of processes running in the background to 3 in dev settings or change the used memory limit to something like 1.2 gb. It has 2 gb of RAM, but, as I said, the ROM sucks, the system eats away a full gigabyte, and it doesn't effectively kill background apps, leaving you with a sluggish device if you multitask.
Anyway, those are just some ideas, if you have some more or would like to code for this device, feel free to share Also, as I always say, give it time. You never know who is gonna get they're hands on the device and do something amazing with it.
Newbleeto said:
I wouldn't keep my hopes up on custom roms. The software is really bad and what it does with the hardware is terrible. It's like a bunch of chipmunks put the code together by randomly typing into a keyboard.
That said, the likelihood of a new kernel to fix that is next to nil. However, since the ROM is as far as I can tell pretty near stock, you can get a pretty good experience from the device by installing gravity box xposed module. I also recommend trickstermod and changing the governor to performance, as well as some kernel tweaking if you know what you are doing.
Also, very important, limit the amount of processes running in the background to 3 in dev settings or change the used memory limit to something like 1.2 gb. It has 2 gb of RAM, but, as I said, the ROM sucks, the system eats away a full gigabyte, and it doesn't effectively kill background apps, leaving you with a sluggish device if you multitask.
Anyway, those are just some ideas, if you have some more or would like to code for this device, feel free to share Also, as I always say, give it time. You never know who is gonna get they're hands on the device and do something amazing with it.
Click to expand...
Click to collapse
hi and thanx for the answer
yes i saw that it's almost stock but crappy optimized...in the very first start of the tablet i had 1.8gb occupied by nothing and clean master always notifies me that 90% of the ram is busy...meh
maybe just a kernel will fix like you say but you know, android 4.4 will be a must (rockchip already released sdk for 3188). I am not a coder (totally zero) but i will try your suggestion...just a question about the performance governor, does it drain more battery?
i am trying to backup my rom but cwm is so buggy...first was impossible, now i'm stuck on backing up boot image
there is a twrp available for this tablet?
solved
ehy can someone provide a stock rom for the qilive 97r? I'm using a omni 4.4.4 but i want to rever back
thank you
Dump stock ROM QiLive 97R
Jammed_Death said:
ehy can someone provide a stock rom for the qilive 97r? I'm using a omni 4.4.4 but i want to rever back
thank you
Click to expand...
Click to collapse
Yes, i have one. How could i send to you?
Could we change your Omni stock ROM by mine?
I have tried ROM Archos 97b Platinum but touch screen is not working. The only possibiliti to work is by a USB Mouse.
Many thanks.
Redinpais said:
Yes, i have one. How could i send to you?
Could we change your Omni stock ROM by mine?
I have tried ROM Archos 97b Platinum but touch screen is not working. The only possibiliti to work is by a USB Mouse.
Many thanks.
Click to expand...
Click to collapse
you can upload it on mega or gdrive or something like that
for the omni come here, http://forum.xda-developers.com/showthread.php?t=2310818
author thread with links and guides I think you can even try the fixes with your current rom but better ask oma
about the cwm, there is a way to mount sdcard?
Dump stock ROM QiLive 97R
Jammed_Death said:
you can upload it on mega or gdrive or something like that
Click to expand...
Click to collapse
Here he are...
https://www.wetransfer.com/download...556a9cf8fdbc6ddd7ab35ab820141126224717/09298e
Is only available until Decenber, 3 ,so Download it now.
Jammed_Death said:
for the omni come here, http://forum.xda-developers.com/showthread.php?t=2310818
author thread with links and guides I think you can even try the fixes with your current rom but better ask oma
Click to expand...
Click to collapse
I've been watching but I can not understand. Is confused. There are many files and do not know what to do to "fix".
If you are Portuguese, I would like to talk to you on Skype.
Can be?
Jammed_Death said:
about the cwm, there is a way to mount sdcard?
Click to expand...
Click to collapse
I don´t know how I can answer that. I'm new in android, so I sorry.
Jammed_Death said:
thanks, works like a charm...do you have any news about updates\custom roms? I can't find anything even in the archos main site
Click to expand...
Click to collapse
Try this. Sooooooooo beautiful.:good:
(Because this - "To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!" i can not put link now. So ask me by Skype) SORRY
:victory:
Follow the instrutions ther and enjoy KK 4.4.2 Oma ROM Iron KK v1.2 - 24-05-2013 (My QiLive say now - Nexus 7 :angel:
Regards
Qilive 97r
Hi guys , if any body can help me with my tablet Qilive 97r, when I tryed to install new rom via RK development tool there was an error, and my tablet do not booting any more, just black display, do not know what to do, maybe somebody know where I can download original rom , and original installer, I will be thankful for that's.
Denysorlyk said:
Hi guys , if any body can help me with my tablet Qilive 97r, when I tryed to install new rom via RK development tool there was an error, and my tablet do not booting any more, just black display, do not know what to do, maybe somebody know where I can download original rom , and original installer, I will be thankful for that's.
Click to expand...
Click to collapse
I'm interested
please ROM stock
Hello, i need help , if somebody know where I can download original rom , and original installer, I will be thankful for that's.
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
HPTesla said:
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
Click to expand...
Click to collapse
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Penley94 said:
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Click to expand...
Click to collapse
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
HPTesla said:
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
Click to expand...
Click to collapse
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Penley94 said:
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Click to expand...
Click to collapse
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
HPTesla said:
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
Click to expand...
Click to collapse
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Penley94 said:
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Click to expand...
Click to collapse
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
HPTesla said:
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
Click to expand...
Click to collapse
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Penley94 said:
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Click to expand...
Click to collapse
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly what he said, framaroot was quick and easy for me, but the lgog is so damn picky and fiddy seems to be the preferred method so use it just to be safe. I had zero issues with framaroot but I think I've just been lucky. And definitely update to zvc before doing either. I'd also update prl and profile for good measure.
That sucks that you lost all of your data, they must have actually did a hard reset where as BestBuy told me they did a hard reset and actually did a soft reset. But it's BestBuy so I never expect much. I softbricked my lgog the day after I got it using the GAIO tool(before finding out about FreeGee) and they fixed it with a soft reset. The guy called the manager over and the manager asked me if I tried unlocking the bootloader and I played dumb. My exact words were "What the hell is a bootloader?" and he immediately fixed it. But I was shocked anyone at BestBuy would even know that. Lmao.
As for my EVO, the micro usb port broke so I was charging it for two months like MacGyver, literally stipped the usb charging wire and hooked it straight into the positive/negative terminals in the battery while turned off! It was a fire hazard but it did the trick, lol. And luckily it had external sd(my one big gripe about the lgog) so I could still get my stuff off of it even without usb. I did love that phone, but you're right, it's incredibly slow now compared to the wonderful lgog.
And as always you are quite welcome!
---------- Post added at 07:39 PM ---------- Previous post was at 07:30 PM ----------
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I think the reason I say framaroot is bc its also super easy, install the app, pick gandalf exploit and it will do it's thing - done without ever connecting to a pc. But @engine95 is right, fiddy is more stable so use that. As for TWRP, I love 2.5.0.0 but for KK roms you have to use the one that comes with updated FreeGee, TWRP 2.6.3.x because of the SELinux changes Google made with 4.4. TWRP 2.6 was unstable originally but has since become just as stable as 2.5 according to most. OpTimuS DE was rock solid for me, as for getting some of the G2 apps, I'm not certain. It's doable but I don't know how difficult it would be because I've never tried to install them elsewhere. And I already gave you my choice of best current KK roms but today I found out a few guys are trying to get OMNI official for us. When that happens I think I will be switching to OMNI because they have been producing some impressive commits/tweaks that you won't find elsewhere. Just look through xda news to see what I mean, OMNI is on a roll!
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Again, I think you're right on all fronts. Liquid was smooth(heh) but it hasn't been long since we received an official 4.3 so I don't think they're up to 4.4. And same goes for the G2 apps, sometimes it's as simple as pulling an apk out of a zip and pushing it to system/apps and changing permissions but I think Lrod did a lot of work to get the G2 apps working on our phone because they required certain dependencies/modified frameworks.
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Penley94 said:
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Click to expand...
Click to collapse
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
engine95 said:
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
Click to expand...
Click to collapse
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Penley94 said:
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Click to expand...
Click to collapse
AOSP SuperNexus has been getting good reviews here in the forums but I haven't tried it yet. I would give that one a shot though. I'd flash GAPPS standard with it instead of GAPPS core as well. This is just generally speaking with any of the AOSP roms.
The directions @engine95 gave you for fiddy are spot on(as usual ), specifically having the phone in charge only mode instead of mtp. I think a lot of people have missed that step and it won't work in mtp. Using usb 2.0 is another good tip.
And if your phone didn't reboot, you probably arent rooted. Easiest way to check that you are rooted is by going into the app drawer and seeing either Superuser or SuperSu app. If it's there, you're rooted, if not, it didnt work. If it said it worked but didnt reboot, Im assuming you rebooted manually? It sounds silly but sometimes it's as simple as that. But again, after rebooting if one of those apps arent there, you are not rooted.
EDIT: I've never tried rooting with fiddy without being in charge only mode, Im wondering if being in mtp may install supersu/superuser app but not the binary? Probably not but I could be wrong. Just wondering if there is any possible way that the app could be there but you still wouldn't have root privileges. For me, if the app is there, I'm rooted but I don't pretend to know everything(far from it, lol).
EDIT#2: Once you are rooted and recovery is installed, here is the link to SuperNexus.
EDIT#3: And I can't stress this one enough....after rooting and unlocking the bootloader, before flashing ANYTHING, make a full backup of your stock AND copy the TWRP folder(with your backup in it) to a computer, JUST IN CASE! That way you will always have a backup elsewhere, even if something goes wrong with your phone's internal storage. Better safe than sorry!!! And it's also best to copy the entire TWRP folder.
@HPTesla You're on a roll!
Go with everything he's said.
I don't use Google music ,so I'm of little help there.
Almost every ROM has its quirks, and it's just a matter of finding the one that does what you need/want.
Our devs have given us a lot of options. And I know, I sure appreciate them.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
I ran OpTiMuS for a long time and every time I would try new roms, decide I didn't like or whatever and go back, I'd always have to 1. Dial ##72786# 2. Let it self activate sometimes twice, but usually just once before I would pick up 3g/4g. May have just been my phone but you may try that out if you go back to optimus De. Over all, my favorite stock like rom though.
Sent from my Optimus G using XDA Premium 4 mobile app
Where can it be found?
Found and installed. Now just have to figure how to get into recovery?
edekalil said:
Found and installed. Now just have to figure how to get into recovery?
Click to expand...
Click to collapse
1) If you have ADB, connect, allow adb and adb reboot recovery
2) Hardware key combo: Volume Up & Power until LG screen appears, then Volume Down twice, then Power (yeah, looks like game cheat code but it really works)
I thought I had the drivers loaded because I could see my phone in explorer but I must not have the drivers loaded.now how can I find the adb drivers and how do I set them up? Every time I think I am getting somewhere I get thrown way back again. All I want to do at this time is reload the firmware so I can access the ext sd card witch was lost while trying to root and install cwm. I am about to throw this **** aginest the wall wall that way this will be fixed for good.
Use LGUnifiedDriver, it should install both adb and LG drivers
Where can I get a clean download of it? I am running windows 8.1 . I do have a pc with windows xp as well just havent used it in a while.
LG's support site I think, I still use old version, from first time I've flashed something via LGFlashTools.. You can download that and LG Support Tool from there too.
I have the lg support tool installed as well as the lg pc suite and lg flash tool. I will give it a shot using the lgunifidedriver. I wonder when I origanly tring to root and install cwm and then lost the ability to access the ext sd and not being able to boot into recovery. Could it have made my phone not recognizably? I can see the phone in win explorer when plugged in. The pc does not recognize it in device manager. It says it has no drivers.
Other than that the phone works normal (makes calls,receives calls,and such.).
edekalil said:
I have the lg support tool installed as well as the lg pc suite and lg flash tool. I will give it a shot using the lgunifidedriver. I wonder when I origanly tring to root and install cwm and then lost the ability to access the ext sd and not being able to boot into recovery. Could it have made my phone not recognizably? I can see the phone in win explorer when plugged in. The pc does not recognize it ino device manager. It says it has no drivers.
Other than that the phone works normal (makes calls,receives calls,and such.).
Click to expand...
Click to collapse
That sounds like Windows problem more. You don't have any of those all-in-one driver packs for Android devices installed? How did you root it?
Well I read to use lg support tools to install drivers then used geefree app to root checked with root checker witch said it was rooted ok then used gprorecovery.apk to put cwm on it. Witch said it installed sussfully. After I had it done I noticed I could not access the ext sd card nor boot into cwm. I read on anouther android forum about a felle who had the same issues and someone said the geefree app caused the issues with the ext sd and not booting into recovery.the phone all works fine except for the issues. I figured if I could return back to stock 4.4.2 witch it is on now it should be back to stock and I could try again from the beginning. I also read something about not using a 3.0 usb in windows 8.1 to use a 2.0 usb port. I'll have to see what usb port is what on my laptop. I hope this is all making sense.
edekalil said:
Well I read to use lg support tools to install drivers then used geefree app to root checked with root checker witch said it was rooted ok then used gprorecovery.apk to put cwm on it. Witch said it installed sussfully. After I had it done I noticed I could not access the ext sd card nor boot into cwm. I read on anouther android forum about a felle who had the same issues and someone said the geefree app caused the issues with the ext sd and not booting into recovery.the phone all works fine except for the issues. I figured if I could return back to stock 4.4.2 witch it is on now it should be back to stock and I could try again from the beginning. I also read something about not using a 3.0 usb in windows 8.1 to use a 2.0 usb port. I'll have to see what usb port is what on my laptop. I hope this is all making sense.
Click to expand...
Click to collapse
Return it back to Jellybean if possible, use old Jellybean root metod available in the forums, install Freegee and flash TWRP from there, and later update it to newer TWRP on forums. Freegee is a step you can't avoid because it's the only way we can unlock our phones (that I know), and their TWRP doesn't support SDCard (not sure about CWM, but I think it also had that problem, it was long time ago I've used it). E980 can get a bit shady, but it's a great phone, so don't lose your patience yet.
Thanks for the info. I belive I have the drivers installed now, I can see the phone in the device manager of windows and it looks to be good. I will keep you informed as to how it go's.
Sent from my LG-E980 using XDA Free mobile app
Well I got the drivers loaded last night and dod tht lg flash tools tot program to put it back to 20g rather than 20h. Got root and installed cwn just need to see what it takes to get philz if so the first time it did not take. Anyway all is working except my xda apps. Other than that all is good so far as soon as I can figuer and get the phillz working I will search for some roms to put on it. The problem wsa the loose nut behind the steering wheel. I had the phone plugged into a 3.0 usb not a 2.0 and my IT friend helped me with how to deal with windows 8.1 so now I am sorry for all of my aggrovating all with my crazy rantting. So Thanks to all for putting up with me. And thanks to youSquirl man.
edekalil said:
Well I got the drivers loaded last night and dod tht lg flash tools tot program to put it back to 20g rather than 20h. Got root and installed cwn just need to see what it takes to get philz if so the first time it did not take. Anyway all is working except my xda apps. Other than that all is good so far as soon as I can figuer and get the phillz working I will search for some roms to put on it. The problem wsa the loose nut behind the steering wheel. I had the phone plugged into a 3.0 usb not a 2.0 and my IT friend helped me with how to deal with windows 8.1 so now I am sorry for all of my aggrovating all with my crazy rantting. So Thanks to all for putting up with me. And thanks to youSquirl man.
Click to expand...
Click to collapse
You're welcome, I'm glad I've helped.
About Philz recovery, I think you have full info on it's thread. If you need some more help, I'm around somewhere
Thanks again.
If you are on Lollipop, this guide is NOT for you!
Almost none of this is my work, I just collect it and put it together in one place and I'm writing a small how-to get things done.
PLEASE ONLY PROCEED AT YOUR OWN RISK!!!!!!!!!
ONLY FOR ZX551ML
Bootloader unlock:
Currently the only way I was able to get ROOT on the phone was by installing it from TWRP which required an unlocked bootloader, so the first step is to get the bootloader unlocked, to do this please follow this steps:
1) Enable USB debugging - If you do not know what is that and how to do it, you should probably STOP right here.
2) Download and extract: Unlock 6_ZX551ML.ZIP
3) From the extracted folder run unlock.bat (This will restart your phone into fastboot mode, downgrade the bootloader and unlock it)
4) When step 3 is completed, you need to run restore.bat
If everything went on correctly your boot screen should be inverted (white background, black Asus text). This was the most risky part. I only have my phone and it worked, but if something goes wrong here you might end up bricking your phone, so please take extreme care, always read the messages on the screen!!!!!
Custom Recovery:
1) Now to get a custom recovery, please download TWRP-3.0.2-M1-Z00A.img.
2) Put your phone into bootloader mode, if your phone is currently in use, just use the following commands:
Code:
adb reboot bootloader
Alternatively you can power off the phone, remove the USB cable. Power it back on while holding the volume up button.
3) once your phone if in bootloader mode please use the following command:
Code:
fastboot flash recovery TWRP-3.0.2-M1-Z00A.img
4) Use the vol up & down to select "RECOVERY"
5) Use the power button (short press) to reboot to TWRP
ROOTING
1) Download BETA-SuperSU-v2.74-2-20160519174328-patch-by-shakalaca-for-zenfone2-6.0_(1).zip
2) In recovery select Advanced -> Sideload
3) From your computer use the following commands:
Code:
adb sideload "BETA-SuperSU-v2.74-2-20160519174328-patch-by-shakalaca-for-zenfone2-6.0_(1).zip"
4) Once it's completed installing, restart the phone to system
FLASHABLE STOCK ROM
If you have TWRP installed and you want to flash the latest stock ROM, you will need to, make sure you un-root your phone from the supersu app, reboot to recovery and sideload the zip. You can also copy the zip to your phone and install it from twrp. When installing the stock rom, your bootloader will be locked again, so you will need to unlock it (if you wish), also you will need to root again, because the root is lost. However the modified stock rom will NOT remove the custom recovery giving you freedom to flash whatever you like in the future...
XPOSED
Xposed on our device won't work if we have SuperSu installed. If you want to use Xposed modules you will need to use PHH's SuperUser instead. All files required for Xposed/Magisk/Phh's SuperUser are available in the Xposed folder.
Available modified stock rom versions:
UL-Z00A-WW-4.21.40.141-user-TWRP.zip - Updated: 2016-Oct-07
UL-Z00A-WW-4.21.40.197-user-TWRP.zip - Updated: 2016-Dec-16
Files can be downloaded from: here
Again, please proceed on your own risk.
Special tanks and credits to all the guys who made this possible, namely:
@sorg @social-design-concepts @shakalaca - For bootloader unlock
@jrior001 for the TWRP
@shakalaca - For the modified SuperSU package.
Magisk / systemless should also work?
any way to get back the noninverted Bootscreen?
Tr4sHCr4fT said:
Magisk / systemless should also work?
any way to get back the noninverted Bootscreen?
Click to expand...
Click to collapse
Yes I'm using Magisk, but even with it I wasn't able to use Google Pay. To get back to non inverted, you will need to flash the locked bootloader.
Emil Borconi said:
Yes I'm using Magisk, but even with it I wasn't able to use Google Pay. To get back to non inverted, you will need to flash the locked bootloader.
Click to expand...
Click to collapse
While essentially true the user can always use a different boot animation by flashing one via twrp. There might even be one somewhere of the unmodified asus screen.
Can anyone confirm the flashable Rom mentioned in Post #1 is MM 6.0.1? I ask because my phone upgraded itself right after I booted it up and I wondered if it was on a newer version than the downloadable one. Pretty sure the update was only security updates given it was only around 80mb.
The actuall boot screen is only a couple of seconds long while the boot animation shown
---------- Post added at 10:00 PM ---------- Previous post was at 09:02 PM ----------
Well as usual the linux users drew the short straw. The shell script is for mac users. I decided to see about running the lines manually but never even reached the "danger zone". As soon as I did an "adb reboot bootloader" I followed up with "sudo fastboot devices" (some linux distro's need sudo..some don't)....and nothing shows up although I can clearly see the device is hooked up and in fastboot mode as well as the fact the adb reboot bootloader worked. I swap out one of my other devices and check things...they show up fine in fastboot....ok...so what's missing from this picture?
*update* solved by updating the ubuntu adb and fastboot binaries from here: https://github.com/simmac/minimal_adb_fastboot/tree/master/linux
*update2* bootloader unlocked, supersu flashed and verified. Much appreciated.
I ran the bootloader unlock and it appeared to work. Now it keeps booting back into the bootloader. I can't seem to get it to boot normal. Suggestions?
Nevermind, I didn't realize that I needed to run restore.bat while still in the bootloader. It is booting now! I was able to follow your guide and it is now rooted.
Regarding the marshmallow zip you include. I have a couple questions.
- For the modified stock version that will keep the recovery do I just need to flash it from recovery?
- Do I need to unroot before flashing this modified stock marshmallow?
Thanks!
slgooding said:
I ran the bootloader unlock and it appeared to work. Now it keeps booting back into the bootloader. I can't seem to get it to boot normal. Suggestions?
Nevermind, I didn't realize that I needed to run restore.bat while still in the bootloader. It is booting now! I was able to follow your guide and it is now rooted.
Regarding the marshmallow zip you include. I have a couple questions.
- For the modified stock version that will keep the recovery do I just need to flash it from recovery?
- Do I need to unroot before flashing this modified stock marshmallow?
Thanks!
Click to expand...
Click to collapse
Happy to read you got it booting, by the time I got to answer you seemed to git it figured out.
Regarding the zip, yes flash from recovery and you don't need to unroot before, but you will need to root after flashing.
However I do suggest you make a backup before flashing jsut in case....
Emil Borconi said:
Happy to read you got it booting, by the time I got to answer you seemed to git it figured out.
Regarding the zip, yes flash from recovery and you don't need to unroot before, but you will need to root after flashing.
However I do suggest you make a backup before flashing jsut in case....
Click to expand...
Click to collapse
I'm assuming the file is just for folks who are on lollipop who want to upgrade? Didn't see any need to flash it since already on 6.0.1 and have it rooted...unless I'm missing something again.
I read this after I went to 6.0.1 from Asus's manual download and update process. I can't get ADB to connect in the OS (developer mode never displays, even though it tells me I'm a developer after doing kernel ver. button process). I tried to get adb devices -l in fastboot and recovery, and it wont discover it. I've tried multiple windows drivers (including the one that worked when I flashed the firmware the first time) to no avail. Any ideas?
Irishman2020 said:
I read this after I went to 6.0.1 from Asus's manual download and update process. I can't get ADB to connect in the OS (developer mode never displays, even though it tells me I'm a developer after doing kernel ver. button process). I tried to get adb devices -l in fastboot and recovery, and it wont discover it. I've tried multiple windows drivers (including the one that worked when I flashed the firmware the first time) to no avail. Any ideas?
Click to expand...
Click to collapse
If windows doesn't see the phone when in recovery there is something wrong, this can be:
1) Wrong driver
2) Damaged USB cable
3) Damaged USB port.
When you are in recovery you should see the phone with adbm if you are in fastboot you should see the phone with:
Code:
fastboot devices
If nothing works you have the nuclear option.
Manually download the original firmware from Asus website: https://www.asus.com/support/Download/39/1/0/26/BXbNqJplzZiLmk6G/32/
copy the zip to an Sd card.
1) Now Turn Off your phone and boot into recovery mode by pressing Power+Volume UP.
2) Now in recovery mode choose to apply update from sdcard.
3) Now select the zip file.
4) Now wait until the process complete and then Reboot the phone.
5) Done!
famewolf said:
I'm assuming the file is just for folks who are on lollipop who want to upgrade? Didn't see any need to flash it since already on 6.0.1 and have it rooted...unless I'm missing something again.
Click to expand...
Click to collapse
More or less true, but somehow I was on a 6.0.1 version which is now gone from the firmware list of Zenfone, meaning I have updated from 6.0.1 to 6.0.1
Again now I see there is a new firmware released yesterday if I have the time I will patch that system image as well so it can be upgraded with TWRP.
famewolf said:
I'm assuming the file is just for folks who are on lollipop who want to upgrade? Didn't see any need to flash it since already on 6.0.1 and have it rooted...unless I'm missing something again.
Click to expand...
Click to collapse
Just for you I've just uploaded the 4.21.40.197 release as well... so now there is a point of the TWRP rom's
Emil Borconi said:
Just for you I've just uploaded the 4.21.40.197 release as well... so now there is a point of the TWRP rom's
Click to expand...
Click to collapse
Typical....now you've given me work I need to do on the phone. ;P
Appreciate your work!
Out of curiosity have you tried xposed?
famewolf said:
Typical....now you've given me work I need to do on the phone. ;P
Appreciate your work!
Out of curiosity have you tried xposed?
Click to expand...
Click to collapse
Yes and it works. I tried a few modules, but generally speaking I'm not a big xposed user myself. Nify doesn't work to well because of all the asus software on it and I wasn't able to get google assistant either. Android audo mod worked perfectly, so yeah generally speaking xposed work's
Emil Borconi said:
Yes and it works. I tried a few modules, but generally speaking I'm not a big xposed user myself. Nify doesn't work to well because of all the asus software on it and I wasn't able to get google assistant either. Android audo mod worked perfectly, so yeah generally speaking xposed work's
Click to expand...
Click to collapse
Thanks...that answers all my questions except for figuring out what's safe to disable. I put a post in q&a but no replies..the zoom appears to have a very small group on xda. I'll figure it out eventually.
famewolf said:
Thanks...that answers all my questions except for figuring out what's safe to disable. I put a post in q&a but no replies..the zoom appears to have a very small group on xda. I'll figure it out eventually.
Click to expand...
Click to collapse
Actually most if them can be. Here is a print screen of the ones I have disabled on my phone hover I have a zenpad z380c which I use as my car dashboard and on that one o have disabled almost of all of the apps, except zenhome, audio manager and the file manager.
Yes I was surprised to find out that there is almost no zoom community.
Emil Borconi said:
Actually most if them can be. Here is a print screen of the ones I have disabled on my phone hover I have a zenpad z380c which I use as my car dashboard and on that one o have disabled almost of all of the apps, except zenhome, audio manager and the file manager.
Yes I was surprised to find out that there is almost no zoom community.
Click to expand...
Click to collapse
I'm actually enjoying mobile managers auto startup managing...it's done a good job of keeping 10000 things from running at startup that don't need to although "Startup Manager" would do a similar job for free. I'm liking the zenui launcher and calling screen so don't want to break anything related to that...the phone's been performing exceptionally well for days on end with no required reboots. Been very impressed. Previously been fighting with a T-mobile V10 and an Alcatel Idol 3...the v10 had spontaneous reboots...the idol had a stock rom with a bunch of lag in it....tiny to nothing development on both of those.
What about Zentalk, ZenChoice, PhotoCollage, MyAsus Service center, Clean Master, Audiowizard and Bug Reporter?
famewolf said:
I'm actually enjoying mobile managers auto startup managing...it's done a good job of keeping 10000 things from running at startup that don't need to although "Startup Manager" would do a similar job for free. I'm liking the zenui launcher and calling screen so don't want to break anything related to that...the phone's been performing exceptionally well for days on end with no required reboots. Been very impressed. Previously been fighting with a T-mobile V10 and an Alcatel Idol 3...the v10 had spontaneous reboots...the idol had a stock rom with a bunch of lag in it....tiny to nothing development on both of those.
Click to expand...
Click to collapse
I use tasker for that, but yes I agree as a whole is not bad, this is my 4rd Asus product (Zenfone 4, Zenfone 2, Zoom and Zenpad) and overall I'm quite impressed with how they perform, just the support from Asus isn't really the top of the cream... they released MM when other were releasing N... so yeah a bit of sour taste, otherwise happy. And the camera, I think it's brilliant, not the best on the market, but the optical zoom is cool, as well as the camera app which allows you to do some nice manual shooting.
Emil Borconi said:
I use tasker for that, but yes I agree as a whole is not bad, this is my 4rd Asus product (Zenfone 4, Zenfone 2, Zoom and Zenpad) and overall I'm quite impressed with how they perform, just the support from Asus isn't really the top of the cream... they released MM when other were releasing N... so yeah a bit of sour taste, otherwise happy. And the camera, I think it's brilliant, not the best on the market, but the optical zoom is cool, as well as the camera app which allows you to do some nice manual shooting.
Click to expand...
Click to collapse
I listed a few apps in my previous post I wondered if you had looked at..it was a last minute addition so you may have missed it. I own tasker...I'm unaware of using it to stop tasks from running at bootup although I have used it to MAKE some apps run after "Boot Completed".
famewolf said:
I listed a few apps in my previous post I wondered if you had looked at..it was a last minute addition so you may have missed it. I own tasker...I'm unaware of using it to stop tasks from running at bootup although I have used it to MAKE some apps run after "Boot Completed".
Click to expand...
Click to collapse
Generally tasker can be used for almost anything.... but I'm doing most of the thing with root+shell scripts, but yes nothing wrong with the app provided by Asus. I think everybody uses the setup/software he/she is most comfortable using... and there is no right or wrong.... that's until you are NOT and iCrap user, because that is the ultimate WRONG! )
Emil Borconi said:
Generally tasker can be used for almost anything.... but I'm doing most of the thing with root+shell scripts, but yes nothing wrong with the app provided by Asus. I think everybody uses the setup/software he/she is most comfortable using... and there is no right or wrong.... that's until you are NOT and iCrap user, because that is the ultimate WRONG! )
Click to expand...
Click to collapse
Well from the lack of posts it appears you and I ARE the zenfone zoom community. Any idea where the system updates get stored after downloading? I thought in /cache based on regular zenfone posts but was unable to see it. I've got one available but it has to be modified for twrp compatibility as well as unrooting temporarily.
Hi,newbie here.My device isn't rooted.Yesterday, I downloaded Marshmallow update 6.0.1.At 43%,I started the update.I thought it will complete in that.you know,the logo and all came.I watched it updating till 85% then got on with my work.Then,I felt a vibration.I saw it rebooting and then it showed samsung logo in all white.It wouldn't move forwards after that.I heard 3 vibrations periodically.The 1st one...4 sec gap...and then the 2nd & 3rd vibrations in quick succession.And it would go on infinitely until the battery discharged.I plugged it in the wall charger and then I noticed the charging has also become very slow.I left it for charging at 6 AM and till now(12:14pm),its just 58%.I read in a thread about force restrat and quickly going into recovery mode.I wiped the cache partition hoping it would solve the problem but it didn't. I couldn't understand the rest of the part,so I didn't try.I selected power off option and right now it is charging.I have important data stored on the internal storage so I fear doing a factory reset.I also have fingerprint lock on it so I have no idea how to connect to PC and use.I got no idea about flashing roms.Is there any possible way to revert back to lollipop? I just want my data before I do something.Please help.Also,I had some pics(only pics) in the private mode.I also need to recover that.
Yea your going to have to flash a stock image via Odin.
Your going to have to do some reading on XDA, no way round it, there is no quick fix with a few buttons lol.
Here is the general flow, read on XDA to fill in your gapps.
1. Find load Samsung USB drivers
2. Find latest version of ODIN, Samsung flashing tool
3. Find and download stock image suitable for your version / country
4. Flash it
like I said read, read, and read again, all the info you need is here in good detail.
See,that is the problem.As I mentioned in the post,I have no idea what uou just said.I have only the slightest idea about yhus stuff.As I don't want to mess with my data,I am asking for a specific solution to this problemAny help would be greatly appreciated.
SSJB said:
See,that is the problem.As I mentioned in the post,I have no idea what uou just said.I have only the slightest idea about yhus stuff.As I don't want to mess with my data,I am asking for a specific solution to this problemAny help would be greatly appreciated.
Click to expand...
Click to collapse
Read this entire thread
https://forum.xda-developers.com/galaxy-tab-s/help/stuck-samsung-logo-t3067773
If you don't get it use Google to help.
Dude, you need to learn what all this stuff means , or pay someone to do it for you, simple as that.
Relax about your data, its still there. It can be recovered via adb , or even easier flash twrp recovery and use the inbuilt file manager and copy it to USB or SD card.
But before you do a shed load of study any further advice is useless, hows your PC skills?
vecna said:
Read this entire thread
https://forum.xda-developers.com/galaxy-tab-s/help/stuck-samsung-logo-t3067773
If you don't get it use Google to help.
Dude, you need to learn what all this stuff means , or pay someone to do it for you, simple as that.
Relax about your data, its still there. It can be recovered via adb , or even easier flash twrp recovery and use the inbuilt file manager and copy it to USB or SD card.
But before you do a shed load of study any further advice is useless, hows your PC skills?
Click to expand...
Click to collapse
Well,that depends on the definition of PC skills.I think I am aware of the basics
vecna said:
Read this entire thread
https://forum.xda-developers.com/galaxy-tab-s/help/stuck-samsung-logo-t3067773
If you don't get it use Google to help.
Dude, you need to learn what all this stuff means , or pay someone to do it for you, simple as that.
Relax about your data, its still there. It can be recovered via adb , or even easier flash twrp recovery and use the inbuilt file manager and copy it to USB or SD card.
But before you do a shed load of study any further advice is useless, hows your PC skills?
Click to expand...
Click to collapse
So,you mean to say by that I will get my data AS WELL AS tab? Will I get the data which was on private mode?
vecna said:
Read this entire thread
https://forum.xda-developers.com/galaxy-tab-s/help/stuck-samsung-logo-t3067773
If you don't get it use Google to help.
Dude, you need to learn what all this stuff means , or pay someone to do it for you, simple as that.
Relax about your data, its still there. It can be recovered via adb , or even easier flash twrp recovery and use the inbuilt file manager and copy it to USB or SD card.
But before you do a shed load of study any further advice is useless, hows your PC skills?
Click to expand...
Click to collapse
The thread which you mentioned has a stock recovery for T805 I think.I got T705.Will it work for mine or would i have to download for t705?
SSJB said:
The thread which you mentioned has a stock recovery for T805 I think.I got T705.Will it work for mine or would i have to download for t705?
Click to expand...
Click to collapse
Nope best get one for t705, but while you are here I would flash twrp custom recovery here,
https://forum.xda-developers.com/ga...recovery-twrp-2-7-1-0-touch-recovery-t2817100
That recovery has a file manager in it, you can copy files around before you ever get to booting android, which is exactly what you need for your data.
You seem to be progressing quite fine, another day or so an you will have the experience necessary, you put yourself down on the first post, there is nothing wrong with your technical skills, your obviously a bright chap.
I'm not at all sure of private mode, have zero clue what it is or how it works, but I'm confident it can be cracked somehow. After all most other parts of Samsung have been cracked including fingerprint/pin lock.
But if you first flash twrp and see if you can data off that way, then if that fails we can have a go at cracking Samsung propper.
Yes tab is fine, data is fine, both will be back with a little time and effort.
vecna said:
Nope best get one for t705, but while you are here I would flash twrp custom recovery here,
https://forum.xda-developers.com/ga...recovery-twrp-2-7-1-0-touch-recovery-t2817100
That recovery has a file manager in it, you can copy files around before you ever get to booting android, which is exactly what you need for your data.
You seem to be progressing quite fine, another day or so an you will have the experience necessary, you put yourself down on the first post, there is nothing wrong with your technical skills, your obviously a bright chap.
I'm not at all sure of private mode, have zero clue what it is or how it works, but I'm confident it can be cracked somehow. After all most other parts of Samsung have been cracked including fingerprint/pin lock.
But if you first flash twrp and see if you can data off that way, then if that fails we can have a go at cracking Samsung propper.
Yes tab is fine, data is fine, both will be back with a little time and effort.
Click to expand...
Click to collapse
So,basically..
1. I need to download twrp recovery on my pc.(Also,I don't think i had usb debugging enabled(i read that somewhere that it is needed to install twrp,i don't know)So,is that a issue or is it safe to proceed without it being enabled?)
2.Connect the tab to pc.
3.Download it to the tab via odin mode/flash it with sd card.
4.Take back up(one silly question: where will the back up get stored)(another one,just need to confirm: i will install twrp via odin mode and then boot into recovery mode and take back up,right?).
5.Then,Install stock rom via sd card(is that correct?)
And Then what?Am I good to go? Tab will just switch on then and I will have my data?help me here please.
SSJB said:
So,basically..
1. I need to download twrp recovery on my pc.(Also,I don't think i had usb debugging enabled(i read that somewhere that it is needed to install twrp,i don't know)So,is that a issue or is it safe to proceed without it being enabled?)
2.Connect the tab to pc.
3.Download it to the tab via odin mode/flash it with sd card.
4.Take back up(one silly question: where will the back up get stored)(another one,just need to confirm: i will install twrp via odin mode and then boot into recovery mode and take back up,right?).
5.Then,Install stock rom via sd card(is that correct?)
And Then what?Am I good to go? Tab will just switch on then and I will have my data?help me here please.
Click to expand...
Click to collapse
1. Nope do not need adb enabled etc, your fine there
2. yep
3. Yep, just make sure you have appropriate Samsung USB drivers installed, and most recent version of Odin would be nice, you flash it by selecting file on PC which is then flashed to device, no SD card used.
4 yep, In twrp you have choice of where to put backup, chose extrenal SD card and your good to go.
4.1 When in twrp, go to advanced>file manager, navigate to your internal storage, then you can copy your data directly to SD card.
STOP HERE.
When you have successfully flashed twrp. Stop, at this point we have all the tools you need installed to start hunting for your data, and proberly repair your current installation. If your data is encrypted somewhere we definitely need to repair the boot, that's going to be easiest method.
Once we have the data, then yes flash a standard image.
vecna said:
1. Nope do not need adb enabled etc, your fine there
2. yep
3. Yep, just make sure you have appropriate Samsung USB drivers installed, and most recent version of Odin would be nice, you flash it by selecting file on PC which is then flashed to device, no SD card used.
4 yep, In twrp you have choice of where to put backup, chose extrenal SD card and your good to go.
4.1 When in twrp, go to advanced>file manager, navigate to your internal storage, then you can copy your data directly to SD card.
STOP HERE.
When you have successfully flashed twrp. Stop, at this point we have all the tools you need installed to start hunting for your data, and proberly repair your current installation. If your data is encrypted somewhere we definitely need to repair the boot, that's going to be easiest method.
Once we have the data, then yes flash a standard image.
Click to expand...
Click to collapse
Do i need to flash twrp recovery specific for my device or is it same for everyone?If it is specific,where can I get one? And is it necessary for my device to be rooted in order to install twrp recovery? And by back up,will I be able to replicate my entire data including app data,files,documents,etc. which was stored before it went into bootloop or will twrp help me recover only selective stuff?
Yes you need t705 twrp https://forum.xda-developers.com/ga...recovery-twrp-2-7-1-0-touch-recovery-t2817100
Nope do not need root.
From twrp you can do anything you need, full backup, selective, Fix your current system, flash a new one without overwriting your data pretty much anything.
What avenue we need to take depends totally what your data is and where it was stored, the answers in the detail, if its sensitive you can pm me.
But first be VERY CONFIDENT you have read everything you can get about ODIN and flashing twrp. I can guide you but your there not me, its up to you to know what you are doing. Just read a bit more, I think another day or so of intensive reading and you will be there. As I keep saying your not stupid just focus, there is frigg all difference between you and an android developer, they have just obsessively read up on the subject, you have not lol
vecna said:
Yes you need t705 twrp https://forum.xda-developers.com/ga...recovery-twrp-2-7-1-0-touch-recovery-t2817100
Nope do not need root.
From twrp you can do anything you need, full backup, selective, Fix your current system, flash a new one without overwriting your data pretty much anything.
What avenue we need to take depends totally what your data is and where it was stored, the answers in the detail, if its sensitive you can pm me.
But first be VERY CONFIDENT you have read everything you can get about ODIN and flashing twrp. I can guide you but your there not me, its up to you to know what you are doing. Just read a bit more, I think another day or so of intensive reading and you will be there. As I keep saying your not stupid just focus, there is frigg all difference between you and an android developer, they have just obsessively read up on the subject, you have not lol
Click to expand...
Click to collapse
Could you be available to guide me along the way as I don't want to mess this up? I am pretty confident now that I know that my data is safe and can be recovered. Data mostly consists of some docs and rest are valuable photos.I am just worried about the data stored on private mode(just photos).whether I will be able to recover it or not.So,I really need an expert's way to get it done.I have been reading a lot and I think I am ready. I have messed up my exams due to this.I have an exam tomorrow LOL.And I am busy with this because I won't get settled before I fix it.Also,thanks a lot for your valuable info and attention.
SSJB said:
Could you be available to guide me along the way as I don't want to mess this up? I am pretty confident now that I know that my data is safe and can be recovered. Data mostly consists of some docs and rest are valuable photos.I am just worried about the data stored on private mode(just photos).whether I will be able to recover it or not.So,I really need an expert's way to get it done.I have been reading a lot and I think I am ready. I have messed up my exams due to this.I have an exam tomorrow LOL.And I am busy with this because I won't get settled before I fix it.Also,thanks a lot for your valuable info and attention.
Click to expand...
Click to collapse
Dude if I was there would do it for you lol, yes sure will help you all the way.
Now your up to speed, I will write you a detailed guide to get your data, with as many screenshots as can take, I'm 90% sure your data is not encrypted, hence is somewhere on the tab in plain format.
If you don't need the data for exams, drop this for a couple of days and concentrate on what's left of exams. I will have your detailed guide finished when you do.
vecna said:
Dude if I was there would do it for you lol, yes sure will help you all the way.
Now your up to speed, I will write you a detailed guide to get your data, with as many screenshots as can take, I'm 90% sure your data is not encrypted, hence is somewhere on the tab in plain format.
If you don't need the data for exams, drop this for a couple of days and concentrate on what's left of exams. I will have your detailed guide finished when you do.
Click to expand...
Click to collapse
I had some notes and assignments in that.Though,I can work somehow without them.But,I need to fix this within 3 to 4 days.
SSJB said:
I had some notes and assignments in that.Though,I can work somehow without them.But,I need to fix this within 3 to 4 days.
Click to expand...
Click to collapse
Just did a Google on private mode, the files under private mode ARE encrypted, that means although you can recover them you can't read them.
If we repair the tab they SHOULD. Be accessible ( once back in private mode) , but zero guarantees.
The other files, no problem.
vecna said:
Just did a Google on private mode, the files under private mode ARE encrypted, that means although you can recover them you can't read them.
If we repair the tab they SHOULD. Be accessible ( once back in private mode) , but zero guarantees.
The other files, no problem.
Click to expand...
Click to collapse
As long as there's hope,I am ready to try anything.
vecna said:
Just did a Google on private mode, the files under private mode ARE encrypted, that means although you can recover them you can't read them.
If we repair the tab they SHOULD. Be accessible ( once back in private mode) , but zero guarantees.
The other files, no problem.
Click to expand...
Click to collapse
Hey,my exams are finally over.Can you give a final walkthrough so that things don't go sideways? It would be really helpful.
SSJB said:
Hey,my exams are finally over.Can you give a final walkthrough so that things don't go sideways? It would be really helpful.
Click to expand...
Click to collapse
You seem to be blowing this out of proportion and making it more complicated than it actually is.
The first thing you should do is simply install the stock firmware via odin. There are literally hundreds of in depth guides how to do this. Even the websites you download the software from usually have a guide.
I suggest you install the same android version you originally had as this is safest. If that doesn't boot then move on to the Marshmallow update.
Dont expect instant boot after installing either as the update can take some time to boot.
If worse comes to worse then there is always the option of installing Twrp. However there should be no reason your device shouldn't boot after installing the stock firmware unless the device has had a hardware failure.
Your private folder files should also be accessible via Twrp. They aren't encrypted in my experience and I have accessed files in the private folder just fine.
SSJB said:
Hey,my exams are finally over.Can you give a final walkthrough so that things don't go sideways? It would be really helpful.
Click to expand...
Click to collapse
Yes i have finally done it
....... Installation software pack ( Odin Modem and BootLoader, everything needed )
Fenris_Instal_software_V01.rar ............... SHA256 .................... 352d75ba93107ba6413045503cbab0a1d83e24b5a9658c0e25ac3a7a890b5319
https://mega.nz/#!so4FAKjB!c4UbKNx7EM2XkQ0ejD74L56rh5VDaCOTxqQCSmLdgGU
....... Documentation
Fenris_Install_Documentation_v0.1.rar ............... SHA256 .................... 9fa83f640d5d4da0f3be0edf40de2ec6adae68abffc1a9f565c426c111dcc13a
https://mega.nz/#!8wJAkTAb!ibZ27umABKmdX_CaU0bVY3Czm8Rj9iZ8vj1npA3xVsY
This is TOTAL NOOB guide to flash TWRP , with shed load of screen shots, if you dont get it from this then hey
Although its also for Fenris users it should suit you just fine.
But this is just for flashing TWRP on a T705, its not covering flashing a standard image.
I would listen to Ashyx , that guy has forgotten more about the tab s than i will ever learn lol
---------- Post added at 10:21 PM ---------- Previous post was at 10:18 PM ----------
ashyx said:
You seem to be blowing this out of proportion and making it more complicated than it actually is.
The first thing you should do is simply install the stock firmware via odin. There are literally hundreds of in depth guides how to do this. Even the websites you download the software from usually have a guide.
I suggest you install the same android version you originally had as this is safest. If that doesn't boot then move on to the Marshmallow update.
Dont expect instant boot after installing either as the update can take some time to boot.
If worse comes to worse then there is always the option of installing Twrp. However there should be no reason your device shouldn't boot after installing the stock firmware unless the device has had a hardware failure.
Your private folder files should also be accessible via Twrp. They aren't encrypted in my experience and I have accessed files in the private folder just fine.
Click to expand...
Click to collapse
Yea and i have just created another guide for flashing TWRP, in my opinion a lot better quality then the ones you find around ( for a start using screenshots of up to date TWRP and Odin )
https://mega.nz/#!8wJAkTAb!ibZ27umABKmdX_CaU0bVY3Czm8Rj9iZ8vj1npA3xVsY
If your bored could you please take a look and post what you think ?
I would welcome some input from a guy with your experience.