Develop Bugs

[Guide]To UnBrick (a Soft Brick) SGS GT-I9000

Hey Users
I wanted to create this guide as I'm seeing allot of SGS users bricking there phone..This guide works for SGS GT-I9000 only..
ALSO USE THIS GUIDE IF AND ONLY IF U SEE THE FOLLOWING IMAGE WHNE BOOTING YOUR PHONE(attached image:1)
Downloads:
1. Odin3_v1.00 download here
2.The PIT file here
3.USB Drivers form here(This Is Optional if it is already installed by your phone, else you need to download it and install it)
Steps:
1.Run Odin3
2.Select "pit" and add the pit file u downloaded
3.Put ur SGS to download mode
--Do so by Pressing the 3 button combo Volume Down+Home(Center) Button+Power button
--Hold it till you see the Download screen(attached image:3)
Then go back to odin and see if your phone is connected (attached image:2)
Make sure re-partition is un-checked
Hit the Start button and wait..it'll unbrick your phone and load the previous Fimrware/Rom...
Enjoy
- - - - - - - - - - - -
Hit the Thanks Button if my thread helped...

yes,that's a soft brick.

Haha I was being stupid and repartitioned my phone and flashed the new stock rom every time that happened. Thanks man!
Sent from my GT-I9000

senotrius said:
yes,that's a soft brick.
Click to expand...
Click to collapse
+1
This will not solve anything if u cant get into download mode, and usually if your phone is bricked then u cant access download mode, so your thread should be called how to fix your phone when its soft bricked

you sir, are a gentleman and a scholar!!!! Got my dad's phone back from the black-screen-of-death.
That pit file saved my life, otherwise i would of had one angry Dad, lol.
Thank you!!

Way better than flashing Darky 10.2 RE every single time like I did. Thanks I'll try it as i get a softbrick frequently.

I hate to be that guy, but this "guide" is somewhat incomplete and misleading:
first of all the very first and important step is making sure one has installed the appropriate drivers and that the OS recognizes the phone through DL mode, otherwise Odin will suck on "setting up connection" (this is the most common cause for soft brick during flashing)!
second: if there's no re-partition, there's no need for pit neither, because that's exactly it's used for: it contains the partition table structure layout for the official firmwares.

What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app

gevamran said:
What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
garbage.
Sent from my GT-I9000 using xda app-developers app

gevamran said:
What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Then it's JTAG time! maybe it's still salvageable!
Tapatalked from TsunamICS

gevamran said:
What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showthread.php?t=1153310
@tchindalia: your odin is really old https://dl.dropbox.com/u/16395058/Odin3 V1.85.zip

( V ) said:
Then it's JTAG time! maybe it's still salvageable!
Tapatalked from TsunamICS
Click to expand...
Click to collapse
I solved it by a strange way! I put the usb jig and just the screen showed the phone and computer with that sign then i attached phone to computer and i opened Odin and it showed "added!" I was shocked!! I installed the software while it was on that screen! And it works so great! Wish it can help anybody
Sent from my GT-I9000 using xda app-developers app

plz help
my samsung galaxy s gt i9000 had the korean software i tried to root it fro CF root. after that it wont turning on....it showd a weaired screen with various colors.. finally i managed to go to odin and upgraded to gingerbread i worked fine....
but....
phone unknown no imie ,base band unknown, wont detect sim card , no sounds and home button doset work plz any one can help me to fix this.....plz frens......(some of them say its a type of soft brick,so plz ,how can i fix it)

tchindalia said:
Hit the Start button and wait..it'll unbrick your phone and load the previous Fimrware/Rom...
Click to expand...
Click to collapse
Definitely NOT true!

[HELP] Phone bricked

Hello dear users of xda. I have a serious problem. My phone is bricked after installing Chainfire 3d driver on jellybean ( i forgot it will not work on JB)
So then i wanted to reflash the Jb MC8 but odin does'nt detect my phone ;(. Tried on 3 pc's tried reinstalling drivers, tried Heimdall still the same.
Recovery mode works, but i dont have a backup. (BTW i have stock recovery of JB MC8) Tried my friend's cable (she has ace 2 too) did'nt work. My flash counter is 2 so i am afraid i might even have to buy a new phone. Can anyone help???

Rihis said:
Hello dear users of xda. I have a serious problem. My phone is bricked after installing Chainfire 3d driver on jellybean ( i forgot it will not work on JB)
So then i wanted to reflash the Jb MC8 but odin does'nt detect my phone ;(. Tried on 3 pc's tried reinstalling drivers, tried Heimdall still the same.
Recovery mode works, but i dont have a backup. (BTW i have stock recovery of JB MC8) Tried my friend's cable (she has ace 2 too) did'nt work. My flash counter is 2 so i am afraid i might even have to buy a new phone. Can anyone help???
Click to expand...
Click to collapse
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550

Allready tried
Rooobertinhooo said:
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Click to expand...
Click to collapse
Dude i allready tried that 3 times ;(

I dont know chainfire, but have you already tried to flash Italian job or kyryllos Rom via temporary cwm again?
Sent from my GT-I8160 using xda app-developers app

One more thing
Rooobertinhooo said:
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Click to expand...
Click to collapse
Would it matter if i had disabled usb debug before the brick happened ?

Rihis said:
Would it matter if i had disabled usb debug before the brick happened ?
Click to expand...
Click to collapse
Flash via odin you can don't tick usb debugging, if odin cannot see your device you must reinstall samsung usb driver
You can copy rom cook to extarnal card and flash it via cwm or twrp i hope it work again
Sent from my GT-I8160 using xda premium

Don't have TWRP or CWM
shine911 said:
Flash via odin you can don't tick usb debugging, if odin cannot see your device you must reinstall samsung usb driver
You can copy rom cook to extarnal card and flash it via cwm or twrp i hope it work again
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
Dude i said i dont have any cwm or twrp installed. Odin does'nt detect phone even after reinstalling drivers 3 times. I have only stock recovery for my phone.

Can you tell me how?
forgottnxd said:
I dont know chainfire, but have you already tried to flash Italian job or kyryllos Rom via temporary cwm again?
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Please can you tell me how to enable temp cwm ? i am a complete noob and really want to get my phone back.

Rihis said:
Dude i said i dont have any cwm or twrp installed. Odin does'nt detect phone even after reinstalling drivers 3 times. I have only stock recovery for my phone.
Click to expand...
Click to collapse
You can copy cwm (the zip file) to the external card and rom cook try flash rom cook via cwm.
Sent from my GT-I8160 using xda premium

Give it to Samsung.

loof13 said:
Give it to Samsung.
Click to expand...
Click to collapse
Easy and simple way!
Sent from my GT-I8160 using xda premium

Seriously?
shine911 said:
Easy and simple way!
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
It's not funny my flash counter is 2 and i guarantee that they arent going to exchange mah old phone to a new one. Unless i think of a uber story of how i dont know what is flash counter and so on

Rihis said:
It's not funny my flash counter is 2 and i guarantee that they arent going to exchange mah old phone to a new one. Unless i think of a uber story of how i dont know what is flash counter and so on
Click to expand...
Click to collapse
I've given my old phone plenty of times to Samsung. It had flash counter 38! Most service centers don't look at it. Give it a shot.

I dont thing it will work dude
loof13 said:
I've given my old phone plenty of times to Samsung. It had flash counter 38! Most service centers don't look at it. Give it a shot.
Click to expand...
Click to collapse
The problem is, I am in Latvia and i dont think people here would'nt check the counter. Do you know any cwm flashable rom that could finally let me have my phone back ??

@Rihis : http://db.tt/m3Wje1qV CWM File Good luck
Search Before POSTING !

Any rom ?
Rikxzdjz said:
@Rihis : http://db.tt/m3Wje1qV CWM File Good luck
Search Before POSTING !
Click to expand...
Click to collapse
But what do i flash in cwm ? I dont think you can flash a .md5 in recovery

Md5 ? CWM backup files ? Yes u can ...
-Create a new file "clockworkmod"
-Move ur CWM Backup files to Clockworkmod folder
-Open CWM
-Restore
Search Before POSTING
http://forum.xda-developers.com/showthread.php?t=2000417 Q and A Thread !

Quick update : I installed Italian job 1.0 and it went past the Model screen but now it is just stuck on the samsung logo help again ???

Download CWM 6 from here : http://d-h.st/oZD
Installation :
1. Download the zip.
2. Put it in the sdcard.
3. Reboot to recovery.
4. Flash update.zip from the recovery.
5. Flash the Italian Job ROM [ HERE ]
---------- Post added at 03:43 AM ---------- Previous post was at 03:39 AM ----------
Rihis said:
Quick update : I installed Italian job 1.0 and it went past the Model screen but now it is just stuck on the samsung logo help again ???
Click to expand...
Click to collapse
u must Mount /system, /data, /cache, /preload to install Italian job
Reinstall it again

Master-ZizO said:
Download CWM 6 from here : http://d-h.st/oZD
Installation :
1. Download the zip.
2. Put it in the sdcard.
3. Reboot to recovery.
4. Flash update.zip from the recovery.
5. Flash the Italian Job ROM [ HERE ]
---------- Post added at 03:43 AM ---------- Previous post was at 03:39 AM ----------
u must Mount /system, /data, /cache, /preload to install Italian job
Reinstall it again
Click to expand...
Click to collapse
Thanks dude!!! (Can any mod close this thread???)

[ls970][CWM Advanced Edition] PhilZ Touch

PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
LG Optimus G Sprint (ls970)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse

Thanks!

Wow seems cool I'll give it a spin
Sent from my LG-LS970 using xda app-developers app

sharkboy0901 said:
Wow seems cool I'll give it a spin
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
+1 as soon as they release ReVolt I am all over it and this.

Phil3759 said:
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Click to expand...
Click to collapse
assert failed: getprop("ro.product.device") == "ls970"
|| getprop("ro.build.product") == "ls970"
E:Error executing updater binary in zip ' /sdcard/Download/philz_touch_5.
Error flashing zip
Updating partition details...
That's what i get when i try and flash it, May it be that i need to redownload it or something else?

desert54 said:
assert failed: getprop("ro.product.device") == "ls970"
|| getprop("ro.build.product") == "ls970"
E:Error executing updater binary in zip ' /sdcard/Download/philz_touch_5.
Error flashing zip
Updating partition details...
That's what i get when i try and flash it, May it be that i need to redownload it or something else?
Click to expand...
Click to collapse
If you open it on your computer without extracting it go to the updater script and remove that line should be good to go after that.
Sent from my LG-LS970 using xda app-developers app

sharkboy0901 said:
If you open it on your computer without extracting it go to the updater script and remove that line should be good to go after that.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
ui_print(" ###################### ");
ui_print("");
ui_print("");
show_progress(1.000000, 0);
assert(getprop("ro.product.device") == "ls970"
|| getprop("ro.build.product") == "ls970");
ui_print("Flashing Recovery...");
set_progress(0.100000);
package_extract_file("recovery.img", "/dev/block/platform/msm_sdcc.1/by-name/recovery");
set_progress(1.000000);
So i assume all of that line that has the ls970, Delete it, And ill be fine? The script will run as intended after?

Only this: assert(getprop("ro.product.device") == "ls970"
|| getprop("ro.build.product") == "ls970");
Then it will flash.
Looks really nice haven't gotten a chance to flash a anything tho but will do tomorrow
Sent from my LG-LS970 using xda app-developers app

Can't install with Xionia recovery.

+1
Sent from my LG-LS970 using XDA Premium 4 mobile app

Flashed with fastboot. Kicking butt
Sent from my Optimus G using xda app-developers app

I have a version I installed around Dec last year. (6.07.9) Is that the most recent?

Nay. Goeth ye to your Internet. Have ye times of merth and merriment as the link in the OP is clickéd, and surely clicks shall follow. Go that way. Recover what lies there.
May ye not be borked.
Sent from my LG-LS970 using xda app-developers app
---------- Post added at 11:01 PM ---------- Previous post was at 11:00 PM ----------
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/ls970
Here go
Sent from my LG-LS970 using xda app-developers app

Thank ye matey! Ya know what a pirate's favorite letter is?

Wondering if previous "regular" cwm backups will still be recognized with this recovery. I'm assuming they will be but wanna make sure. Thanks
Sent from my LG-LS970 using xda app-developers app

I think it recognized my old ones if I'm not mistaken. They're long gone as I'm a neat freak with memory. I've never used more than half the 32G this phone has, but it's nice to know I have it.

Cannot seem to boot to recovery to install this!
I read that for the Optimus G ls970, you hold Vol-up, Home, and Power to boot to recovery so you can install this zip, but it's not working for me at all. the screen just stays black, and I am at 90+% charged. I have tried a dozen times now. Is the stock boot to recovery just different?

agentjonnyb said:
I read that for the Optimus G ls970, you hold Vol-up, Home, and Power to boot to recovery so you can install this zip, but it's not working for me at all. the screen just stays black, and I am at 90+% charged. I have tried a dozen times now. Is the stock boot to recovery just different?
Click to expand...
Click to collapse
I always just go into recovery from goomanager. Get it on the play store and it will reboot u right into recovery
Sent from my LG-LS970 using xda app-developers app

agentjonnyb said:
I read that for the Optimus G ls970, you hold Vol-up, Home, and Power to boot to recovery so you can install this zip, but it's not working for me at all. the screen just stays black, and I am at 90+% charged. I have tried a dozen times now. Is the stock boot to recovery just different?
Click to expand...
Click to collapse
As far as I know this can't be flashed from stock recovery. Root your lg, install freegee from the play store, use it to unlock your bootloader and install one of the given recoveries, I used nandroid manager to boot to recovery but if goo manager has that option too then go for it, but once in your new custom recovery select install zip (from SD card) and choose the philz zip you downloaded. Follow the prompts to complete the install, then select reboot recovery. It will then load to philz. It works. That's exactly how I did it. Don't forget you need to be rooted before using freegee. Framaroot works for that on this phone.

TWRP installation for Galaxy ace 2

How to install Twrp ([Team Win Recovery Project)
Now first of all credits goes out to Team Win for making this amazing custom recovery, secondly make sure you have root if not you could find it on the forum somewhere. Anyway you might want to backup contacts and data and stuff like that in case you accidentally brick your phone or something. Lets get straight in!
Requirements:
A clear thinking brain
Galaxy ace 2 (attempting to do this on another device might suffer unforeseen consequences)
mod editload mode by clicking (Volume up+Home button+Power button) at the same time
then it should come up with some warning then click continue.
4) Plug the phone into the computer via USB cable
5) Open up Odin and click on PDA then open up the file GT-I8160-TWRP-Kernel.tar.md5
6) Hopefully you have install the USB driver because the rectangle just above should appear as COM(number)
7) Then if you are staisfied and checked everything is in order, go ahead and click start!:fingers-crossed:
8) Hopefully after it finnishes it should reboot if you wanna check go ahead and boot into recovery mode and hopefully it should install!:laugh:
If you have any problems or issues make sure to post your questions below.
If this has helped you click thanks rather than just saying it!:good:
Credits goes out to Samsung for making Odin, Team Win and people who ported twrp for galaxy ace 2!

what kernel is this? you should state else people will brick their phones

OK
chimaeragh said:
what kernel is this? you should state else people will brick their phones
Click to expand...
Click to collapse
Has it worked for you? This is only for Gt-I8160 Gingerbread 2.3.6 if it works for other kernels please put them down below in the comments.

doctorwho201 said:
Has it worked for you? This is only for Gt-I8160 Gingerbread 2.3.6 if it works for other kernels please put them down below in the comments.
Click to expand...
Click to collapse
lol who uses gingerbread anymore? :laugh: haven't installed it and don't think i will now

chimaeragh said:
lol who uses gingerbread anymore? :laugh: haven't installed it and don't think i will now
Click to expand...
Click to collapse
Ace 2 users with the HK region model
Sent from my GT-I8160 using Tapatalk
---------- Post added at 06:41 AM ---------- Previous post was at 06:39 AM ----------
doctorwho201 said:
How to install Twrp ([Team Win Recovery Project)
Now first of all credits goes out to Team Win for making this amazing custom recovery, secondly make sure you have root if not you could find it on the forum somewhere. Anyway you might want to backup contacts and data and stuff like that in case you accidentally brick your phone or something. Lets get straight in!
Requirements:
A clear thinking brain
Galaxy ace 2 (attempting to do this on another device might suffer unforeseen consequences)
Twrp for galaxy ace 2 (download)
Odin (download)
A computer
Also install USB driver for galaxy ace 2 on the computer or you can just install Kies (both takes about 5-10 mins)
Instruction:
1) Backup data and files
2) Download all required files.
3) Put phone into download mode by clicking (Volume up+Home button+Power button) at the same time
then it should come up with some warning then click continue.
4) Plug the phone into the computer via USB cable
5) Open up Odin and click on PDA then open up the file GT-I8160-TWRP-Kernel.tar.md5
6) Hopefully you have install the USB driver because the rectangle just above should appear as COM(number)
7) Then if you are staisfied and checked everything is in order, go ahead and click start!:fingers-crossed:
8) Hopefully after it finnishes it should reboot if you wanna check go ahead and boot into recovery mode and hopefully it should install!:laugh:
If you have any problems or issues make sure to post your questions below.
If this has helped you click thanks rather than just saying it!:good:
Credits goes out to Samsung for making Odin, Team Win and people who ported twrp for galaxy ace 2!
Click to expand...
Click to collapse
You found this kernel on the net? Or you built it yourself
Sent from my GT-I8160 using Tapatalk

doctorwho201 said:
How to install Twrp ([Team Win Recovery Project)
Now first of all credits goes out to Team Win for making this amazing custom recovery, secondly make sure you have root if not you could find it on the forum somewhere. Anyway you might want to backup contacts and data and stuff like that in case you accidentally brick your phone or something. Lets get straight in!
Requirements:
A clear thinking brain
Galaxy ace 2 (attempting to do this on another device might suffer unforeseen consequences)
Twrp for galaxy ace 2 (download)
Odin (download)
A computer
Also install USB driver for galaxy ace 2 on the computer or you can just install Kies (both takes about 5-10 mins)
Instruction:
1) Backup data and files
2) Download all required files.
3) Put phone into download mode by clicking (Volume up+Home button+Power button) at the same time
then it should come up with some warning then click continue.
4) Plug the phone into the computer via USB cable
5) Open up Odin and click on PDA then open up the file GT-I8160-TWRP-Kernel.tar.md5
6) Hopefully you have install the USB driver because the rectangle just above should appear as COM(number)
7) Then if you are staisfied and checked everything is in order, go ahead and click start!:fingers-crossed:
8) Hopefully after it finnishes it should reboot if you wanna check go ahead and boot into recovery mode and hopefully it should install!:laugh:
If you have any problems or issues make sure to post your questions below.
If this has helped you click thanks rather than just saying it!:good:
Credits goes out to Samsung for making Odin, Team Win and people who ported twrp for galaxy ace 2!
Click to expand...
Click to collapse
Can you give us the zip version which could be flashable with any recovery???
Sent from my GT-I8160 using Tapatalk

thank's very helpfull..:good:

One JB ROM has a kernel with TWRP (probably OmniROM), but ADB in recovery is broken...

works with KK

ACE2_99 said:
works with KK
Click to expand...
Click to collapse
What??
Sent from my GT-I8160 using Tapatalk

Sorry
I forgat to add "?"

ACE2_99 said:
I forgat to add "?"
Click to expand...
Click to collapse
No. Of course not
Sent from my GT-I8160 using Tapatalk

Can i use this with Android 4.3? (Cyanogenmod10.2 Unoffical from TeamJanica)

any_body said:
Can i use this with Android 4.3? (Cyanogenmod10.2 Unoffical from TeamJanica)
Click to expand...
Click to collapse
NO
Wysłane z mojego GT-I8160 przy użyciu Tapatalka

Samsung Galaxy Ace GT-S5830
Hello I am wondering if this twerp installation can work on my Samsung Galaxy Ace GT-S5830

Amalh said:
Hello I am wondering if this twerp installation can work on my Samsung Galaxy Ace GT-S5830
Click to expand...
Click to collapse
Dont try :/ anyways doesnt cooper have their own twrp? :/

Samsung Galaxy Ace Gt-S5830
I am really new at this can you give me the link to that

i will try this,fb later tnx

Thanks for this, flashed it to my stock rooted ace2, HK band yo~ It rockz~!
then i flashed cm11, it run nicely. so i try to make a backup and found that twrp was replaced by cwm, so i went striaght to flash twrp back. then the phone refuse to boot... it hang at "SAMSUNG GT-I8160" screeen
anybody experiencing the same, or it this just me doing the step wrong?
I factory reset before flashing cm11, the flash gapp, then factory reset again before cm11 first boot.
after that i flash twrp again via odin and then hang at boot.
Thank you.

thank You OP
thank you, thank you,. thank you!
I have had a bit of a nightmare recently with my Ace 2 as one of my recent posting shows.
there are far too many hits on Google to so called tutorials that simply do not work and I have spent years (or is that weeks?)
in getting my phone downgraded/rooted and with my preferred CWM.
the last straw was all the none working advice to get CWM installed, and then I found your thread.
10 minutes later TWRP was installed (a permanent one also!) - and my phone backup up.
all together now -
"happy days are here again -the skies above are clear again - dum de dum de dum de dum! :good::laugh:

Custom Rom: Android 6.0 P8000 Network A & B zip

I'm not good at this at all so if someone wants to clean up the post they can. Anyway, I took the stock rom and converted to zip.
I was also able to do the following:
Add Root
Add Busybox (updated)
Add su.d support
Add Init.d Support via boot.img
Add /data/app support
Add insecure boot.img
Removed dm-verity from boot.img
Removed forceencrypt from boot.img
All this was made possible via SuperR's Kitchen (which is pretty awesome by the way)
Many thanks for his work, that made this all possible. Now I as able to make this same rom
work for the network B versions as well (I have network B). I added the script and files needed to the
ROM for it to work. Let me know how it works out.
Network A
Network B
And found this over at 4pda.ru. Its working great so far!
MyBeats

Is this ROM for p8000 2015 or 2016? What about the fingerprint and the Lag on wake up?
Which recovery do u use for flashing?
And, good job!

Its for the 2015, I did just notice the lag and I haven't tried the finger print yet but would assume those are not fixed. You should use the TWRP 3.0.2 from needrom.com to flash this.
Sent from my P8000 using Tapatalk

Of course after I say that the lag stops
Sent from my P8000 using Tapatalk

Would you be willing to build this for the 2016 version? (Stock 6.0)
In any case thank you for your contribution!

Dvalin21 said:
Of course after I say that the lag stops
Sent from my P8000 using Tapatalk
Click to expand...
Click to collapse
Im sorry i did not uderstand that. I was reffering to the Lag on wake up. You know when the phone is locked, and u press the power button. It takes ~2.5 secounds for the display to light up. That bug is still present?

Dvalin21 said:
I'm not good at this at all so if someone wants to clean up the post they can. Anyway, I took the stock rom and converted to zip.
I was also able to do the following:
Add Root
Add Busybox (updated)
Add su.d support
Add Init.d Support via boot.img
Add /data/app support
Add insecure boot.img
Removed dm-verity from boot.img
Removed forceencrypt from boot.img
All this was made possible via SuperR's Kitchen (which is pretty awesome by the way)
Many thanks for his work, that made this all possible. Now I as able to make this same rom
work for the network B versions as well (I have network B). I added the script and files needed to the
ROM for it to work. Let me know how it works out.
Network A
Network B
And found this over at 4pda.ru. Its working great so far!
MyBeats
Click to expand...
Click to collapse
sorry i am not able to install your rom first if i tryed i got twrp error 7 (this is for p8000 you have a k05ts_a) so i changed the updater-script to k05ts_a than i got twrp error 6 what to do please? or could you change the updater script?
thx
Edit:
I had to chane the two lines:
format("ext4", "EMMC", "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system", "0", "/system");
set_progress(0.100000);
mount("ext4", "EMMC", "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system", "/system");
set_progress(0.200000);
to:
format("ext4", "EMMC", "/dev/block/platform/mtk-msdc.0/by-name/system", "0", "/system");
set_progress(0.100000);
mount("ext4", "EMMC", "/dev/block/platform/mtk-msdc.0/by-name/system", "/system");
set_progress(0.200000);
with that the setup worked well but after that i got a bootloop

Try installing the image version of 6.0, format when you do, and then install it. This worked for me when I came from lollipop
Sent from my P8000 using Tapatalk

Dvalin21 said:
Try installing the image version of 6.0, format when you do, and then install it. This worked for me when I came from lollipop
Sent from my P8000 using Tapatalk
Click to expand...
Click to collapse
is the ROM good? Does it have the wake up bug again?

It doesn't seem to have that. I haven't experienced it but I've only been running it for two days now
Sent from my P8000 using Tapatalk

Dvalin21 said:
It doesn't seem to have that. I haven't experienced it but I've only been running it for two days now
Sent from my P8000 using Tapatalk
Click to expand...
Click to collapse
so when the phone is locked and the screen is off, once you click on the power button it wakes up normally? Without delay?

Dvalin21 said:
Try installing the image version of 6.0, format when you do, and then install it. This worked for me when I came from lollipop
Sent from my P8000 using Tapatalk
Click to expand...
Click to collapse
You mean format not factory reset? I only did a factory reset ...

Using the spftool format and install 6.0. Then install the twrp recovery with the tool and then install the zip. Make sure to wipe everything except your mico SD card
Sent from my P8000 using Tapatalk

Wake up delay is a kernel issue. No fixable for now.

boka18 said:
Im sorry i did not uderstand that. I was reffering to the Lag on wake up. You know when the phone is locked, and u press the power button. It takes ~2.5 secounds for the display to light up. That bug is still present?
Click to expand...
Click to collapse
Sorry, I do experience lag when waking up the phone from lock

No 4g Network
I installed this ROM for the P8000 version B, and I have managed to retrieve the IMEI , but I can not get 4G ... any idea how to solve it?

AispuroR said:
I installed this ROM for the P8000 version B, and I have managed to retrieve the IMEI , but I can not get 4G ... any idea how to solve it?
Click to expand...
Click to collapse
So you was able to install...but when you say retrieve IMEI, what do you mean?
Sent from my P8000 using Tapatalk

Dvalin21 said:
So you was able to install...but when you say retrieve IMEI, what do you mean?
Sent from my P8000 using Tapatalk
Click to expand...
Click to collapse
An apology for my English , I only speak Spanish ... I meant " recover the imeis " with a terminal. When I install a new ROM always I need to insert the IMEI again. I have already achieved in this ROM , but I could not turn on 4g . Engineer mode does not allow me to select the bands of my mobile operator (and it is a fact that is supported, as in android 5.1 I can definitely have 4g) . I need Band 4 for 4g and Band 2 and 5 for 3g. Thanks in advance, and hopefully someone can help with this.

So when you go into engineering mode, does it force close when you try to select Band and then Sim 1?
Sent from my P8000 using Tapatalk

Dvalin21 said:
So when you go into engineering mode, does it force close when you try to select Band and then Sim 1?
Sent from my P8000 using Tapatalk
Click to expand...
Click to collapse
It is not closed, simply are disabled for selection. Simply these are grayed out . I do not know how to post images , but could send a screenshot .