Hi!
I want to try Vanir ROM and i need to upgrade my bootloader.
- Where can i find the latest version?
- And how do i updgrade it? Do i flash it from recovery?
Here is what i got from booting from bootloader:
HW VERSION - 9
BOOTLOADER VERSION - PRIMELC03
BASEBAND VERSION - I9250XXLF1
Thanks!
I don't think you need the latest bootloader even for KitKat ROMs (correct me if I'm wrong, never used Vanir), I'm on LC03 and CM11 works without a hiccup.
Sent from Google Nexus 4 @ crSimple
Related
I have a question concerning my bootloader :
I have a GT-N7100 (French version)
I have Cyanogen 10.1 ROM
I have Devil Kernel
I have N7100XXDLK7 Modem
My bootloader is N7100XXALJ1 which is quite an old version
I would like to upgrade it to the latest N7100XXDMB6
Is there a way to upgrade my bootloader From N7100XXALJ1 to N7100XXDMA6 without going back to Stock Rom and keeping my Cyanogen 10.1 ROM?
up
Colleagues,
I have an SGH-i317 AT&T Galaxy Note II. It is rooted, has TWRP 2.8.1.0 and SuperSU 2.46 and TitaniumBackup all of which work just fine. I used Odin 3.10. I'm about to flash custom ROMSs CM10.2 and CM11. I have a couple things I don't quite understand before I flash. Hopefully someone can help. In the past, AT&T forced OTA upgrades so I'm at runnign rooted 4.4.2. (Specifics on my firmware are below.)
1. I know Android has broken a third party app's ability to save files to the external SIM. Is this problem inherent ONLY to vendor 4.4.2 builds like AT&T's, or does CM and other custom ROMS that are based upon 4.3 and 4.4 suffer from the same dumb limitation?
2. I've read online that the boot loader software became vendor-signed-package aware and is now a "locked" bootloader. AT&T forced my perfectly good 4.1.2 to go to 4.3 and consequently to 4.4.2. Is it not possible to actually replace that bootloader? If not, why not? Is that not possible at this time?
3. I noticed that for my SGHi317 that there is no such thing a an t0lteatt anymore for CM11 since they have merged their development branches. So will the latest t0lte work for SGH-i317? Do I need to do anything special other that flash it and the correct gapps to the phone?
Thanks for the help!
Model SGH-i317
Android 4.4.2
Baseband I317UCUCNJ1
Kernal Version 3.0.31-1728680
Buil number KOT49H.I317UCUCNJ1
SGH-i747M 4.4.2 i747MVLUFOB3 3.4.0-1784548 [email protected]" BUILD KOT49H.I747MVLUFOB
Good Evening, Everyone,
I just bought a used SGH-i747M 4.4.2 i747MVLUFOB3 3.4.0-1784548 [email protected]" BUILD KOT49H.I747MVLUFOB
Seller said It was on Koodo.
Might I ask you a few questions ?
1) Are there advantages to flash Rogers radio as I'm on Rogers ?
2) What is the newest Rom (Lollipop ? Marshmallow ?) that you have been using Without-Losing the Stock driver to enable the use of a MHL Cable (I have one) ? MHL means: USB->HDMI .
3) Any steps you feel I should know before ? Ok, immediately flash TWRP, then Full backup with TWRP.
Any signed TWRP flashable with stock recovery ?
4) Flashing this will Unlock the Provider ? Rogers' modem: https://forum.xda-developers.com/galaxy-s3-att/general/modem-4-4-2-modems-i747-i747m-t2856577
Thank you All.
Flash the latest stock ROM from Sam mobile which can be found here: https://www.sammobile.com/firmwares/database/SGH-I747M/RWC/
Rogers, bell, and telus all use the same bootloader and modem. The only difference between the carrier firmware is some app customisation included with each ROM.
Kit kat is the last official ROM.
Once the phone is running the latest bootloader and modem, you can flash twrp to install a custom ROM.
How can I find out what bootloader I'm on? Baseband is G955USQS5CRF5
Thx
i think its v5
version 5
Hello together,
I'm currently using AlexisROM (Android 10) and want to try Noble ROM (Android 11) on my Galaxy S9 (G960F). On the how-to theres a point regarding kernel and bootloader: "4. Update your MODEM AND BOOTLOADER BEFORE INSTALLING THIS ROM".
Can someone explain me what that mean in detail for my S9? How can I find the latest Bootloader and Kernel?
My current software details:
Baseband: G960FXXUFFUE1
Kernel: 4.9.118-21637096
Build: AR2.7.1_G960FXXUFFUE1
Thanks in advanced.
Chris
The modem ( CP ) and bootloader ( BL ) comes with your firmware
If your on latest stock firmware then you have the latest version of everything
If on a different rom then flash latest stock rom
spawnlives said:
The modem ( CP ) and bootloader ( BL ) comes with your firmware
If your on latest stock firmware then you have the latest version of everything
If on a different rom then flash latest stock rom
Click to expand...
Click to collapse
Thanks for your reply. I will do that.
Assume that the manufacturer no longer provides firmware updates. Assuming the last update came along with Android 10.
Can I also install newer, custom ROMs with this latest Android (e.g. with Android 11 or soon also Android 12) or what must then be done to ensure that the latest BL and CL are in place?
Starbase 12 said:
Thanks for your reply. I will do that.
Assume that the manufacturer no longer provides firmware updates. Assuming the last update came along with Android 10.
Can I also install newer, custom ROMs with this latest Android (e.g. with Android 11 or soon also Android 12) or what must then be done to ensure that the latest BL and CL are in place?
Click to expand...
Click to collapse
Samsung devices i believe only get two majors updates to the OS ie: 8 ( original )-9-10. So android version 10 will be the latest that you get, any updates after that will be minor and security.
As for customs roms you will have to look in the rom section for more information.
The latest firmware is G960FXXUGFUG4 ( android 10 ). If you do a full flash you will have to start from scratch again. ie: unlock bootloader, flash twrp etc