Hey,
I have now but a bigger problem with my HTC OneX .
It was rooted ( after which instructions unfortunately I do not remember ) .
We played on a Rome and it was wonderful . These Rome did not please me more especially the next day , so I got myself another .
And then the problems started :
I constantly got a status 7 error and it could be no more flash Rome. After a few hours I got the tip to use a different CWM version and then try again .
That actually worked ... at least with the CM11 .
Today I went again to work in the belief that it has actually located only at the CMW version . Meanwhile, I 've tried 4 different Rome ... I just keep getting the status 7 error .
I 've tried other versions of CMW , I have also tried TWRP ... always the same. The only Rome that I can flash is CM11 ... and then only with CMW 6.0.4.5 .
In all Rome I did the wipe and flashed the appropriate boot.img via fastboot .
Can someone maybe tell me what I 'm doing wrong ?
Unlocked
ENDEVORU PVT SHIP S-ON RL
HBOOT-1.72.0000
CPLD-None
MICROP-None
RADIO: 5.1204.167.31
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
Modem Path: OFF
Flash the other roms with philz 5.15 !
Flash boot.img, full wipe, install rom
Full wipe means :
Factory reset
Wipe cache partition
Advanced-wipe dalvik cache
Mounts & storage-format cache,data and system
Then install the rom and reboot
Mr Hofs said:
Flash the other roms with philz 5.15 !
Flash boot.img, full wipe, install rom
Full wipe means :
Factory reset
Wipe cache partition
Advanced-wipe dalvik cache
Mounts & storage-format cache,data and system
Then install the rom and reboot
Click to expand...
Click to collapse
Hey,
tanks for answer.
This is a zip File...flash via CMW or extract and flash the recovery.img with fastboot?
Edit:
Hey,
it is bewitched.
I have now tried to flash via CWM where I immediately get an error (Status7).
So I flashed the recovery.img via fastboot, started the boot loader again and am in recovery. I still have CWM 6.0.4.5 on it ...
I also did fastboot erase cache
Then you flashed wrong. Rename this recovery to just recovery.img
https://www.dropbox.com/s/yqzlpqo8illa53j/Philz recovery 5.15.9.img
And flash it via command
Fastboot flash recovery recovery.img
Related
i was on stock hboot 0.93.001, s-off with Runnymede rom and i wanted to install CM7r2 hboot
i put the file PB99IMG_cm7r2 file on root sd and i rename it to PB99IMG
i update it like it says on alpharev.nl but now i cant boot into the rom
i restore the nadroid but nothing.... i also flash again the Runnymede but nothing again
bootloader now is this
Uploaded with ImageShack.us
desire stack here
please some help
Uploaded with ImageShack.us
Because your nandroid is setup to work on a Stock Hboot is the reason it's not working. The system partition space is not enough for your nandbackup file.
did you wipe cache via fastboot after rebooting of bootloader?
fastboot erase cache
you need to wipe/format all partitions including dalvik except sdcard
then flash it again...
Nandroid back up will be not working because you changed system partition size as backup from stock hboot is way too big to fit onto cm7/r2 system partition
kotag82 said:
did you wipe cache via fastboot after rebooting of bootloader?
fastboot erase cache
you need to wipe/format all partitions including dalvik except sdcard
then flash it again...
Nandroid back up will be not working because you changed system partition size as backup from stock hboot is way too big to fit onto cm7/r2 system partition
Click to expand...
Click to collapse
ok i didnt the "fastboot erase cache" cause i cant find the erase cache under the fastboot menu
where is this "fastboot erase cache"?
thank you for your quick answers
You have to type this command in CMD. For installing / using Fastboot / ADB, check my guide.
MatDrOiD said:
You have to type this command in CMD. For installing / using Fastboot / ADB, check my guide.
Click to expand...
Click to collapse
trust me i did look your guide but i founded too much....
i was looking for easyest method to upgreat the hboot but now i will read your guide again ....i guess i have no choice
Easiest to flash things radio, recovery, bootloader or splash screen is IMHO Android Flasher:
http://forum.xda-developers.com/showthread.php?t=794638
EDIT: You use CM7r2-version of Runnymede, do you?
ok i did it more carefully and i flash the rom after upgrate ... so it booted ....
i just got scared i thought i broke it
thank you all
Hello,
Id appreciate any help with my problem:
After wishing to upgrade to JB from ARHD 9 (ICS), I flashed the correct Hboot and upgraded CWM to 5.8.4.0. However, when trying to flash the ARHD ROM, im getting a "failed installation" message after selecting the zip on the SD card. I thought it might be the boot.img i was using (from the download section), so used the one from the ROM zip instead. No luck. I erase the cache etc very time I can.
Any ideas to what might be the problem?
Thanks in advance
so you have a hboot 1.3* and you flashed the boot.img with fastboot command
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
then entered recovery and did a FULL wipe (also dalvik cache under the advanced tab)
then trying to install the rom.zip ?
install failed, redownload the rom, might be corrupted !
Mr Hofs said:
so you have a hboot 1.3* and you flashed the boot.img with fastboot command
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
then entered recovery and did a FULL wipe (also dalvik cache under the advanced tab)
then trying to install the rom.zip ?
install failed, redownload the rom, might be corrupted !
Click to expand...
Click to collapse
exactly - all steps followed. currently downloading it again...
Hi guys ,
For first i don't have many posts becouse my english is not very good and better is reading for me
I have problem with my HOX from few days and need yours help ...
I have branded phone from Orange , in these branded unit is only two languages so i need flashed it with any custom stocked rom ...
I download few diffrent roms and try to use them but always after flash my phone hang on logo ...
Some specyfic information :
Endeavoru PVT SHIP S-ON RL
HBOOT-1.36.0000
3.16.69.3 Stock Orange PL
I unlock bootloader whitout problem.
I flash recovery with CWM 6.0.2.7
I use Viper and Revolutionary HD roms without succes
Yes , I always use wipe / wipe dalvic / format / erace
Yes , I alvays flash boot from rom zip ...
And still have bootloop ...
Please help
Try this
Boot in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery
Factory reset
Wipe cache partition
Wipe dalvik cache
Format cache
Format data
Format system
Unhook the usb cable !!!
Then install the rom.zip and reboot
Hi, this is my first post, and I have a problem with bricked HOX.
I tried to put custom ROM, ViperX, with CWM (previously I unlocked bootloader and flashed with custom CWM recovery.img). After installation, I flashed with boot.img, but I couldn't boot. Now I have bricked, unlocked, HOX. I tried to unbrick with ruu, but ruu warned that my bootloader version is not good for ruu.
So how can I unbrick my HOX, is there ruu version for my HOX (and is there any way to unbrick it at all?)?
My HOX's specs:
CID: HTC__032
version-main: 3.20.401.3
HBOOT-1.39.0000
RADIO-5.1204.162A.29
Please help, and sorry for my bad English. I hope you understood
I think its not bricked.
Do this :
Flash the Viper X boot.img :
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and do this :
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache,data,system
Then install the viper X rom.zip and reboot
Mr Hofs said:
I think its not bricked.
Do this :
Flash the Viper X boot.img :
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and do this :
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache,data,system
Then install the viper X rom.zip and reboot
Click to expand...
Click to collapse
I did, many times, but nothing worked -- after every reboot HOX stayed in boot loop and only thing I could was boot into bootloader mode and recovery.
Then you must have missed a step somewhere .....
Mr Hofs said:
Then you must have missed a step somewhere .....
Click to expand...
Click to collapse
Yes, it seems I really did forget one step.
Thank you very much, works like a charm :good::good:
:thumbup:
CASE CLOSED !
hello
have flashed cynagonmod 10.2 endeavor to my htc one x -> all good , but after autoupdate to the suggested new version via download
my htc was in boot loop
-> so i flashed a recovery , i think the wrong one
now it shows:
relocked
hboot -1.72.0000
endeverou pvt ship s-on RL
radio 5.1204
can`t switch in recovery mode
which recovery should i flash via minimal adb and fastboot?
which command to unlock boot?
1000 thank`s for help
how can i get s-off to flash new recovery?
have downloaded recovery clockworktouch 5.8.4.0 endeavor for new flash
and
Ressurection Remixunoff20140622-endeavor for image
is this the wright one for me?
noobtotal said:
hello
have flashed cynagonmod 10.2 endeavor to my htc one x -> all good , but after autoupdate to the suggested new version via download
my htc was in boot loop
-> so i flashed a recovery , i think the wrong one
now it shows:
relocked
hboot -1.72.0000
endeverou pvt ship s-on RL
radio 5.1204
can`t switch in recovery mode
which recovery should i flash via minimal adb and fastboot?
which command to unlock boot?
1000 thank`s for help
how can i get s-off to flash new recovery?
have downloaded recovery clockworktouch 5.8.4.0 endeavor for new flash
and
Ressurection Remixunoff20140622-endeavor for image
is this the wright one for me?
Click to expand...
Click to collapse
Just go to HTCDEV.com unlock your bootloader via site and after this flash recovery philz 5.15.9 and after this new rom
thanks
Thant said:
Just go to HTCDEV.com unlock your bootloader via site and after this flash recovery philz 5.15.9 and after this new rom
Click to expand...
Click to collapse
Thanks for answer,
bootloader now unlocked,
now:
endeavoru pvt ship s-on RL
hboot -1.72.0000
cpld-none
microp-none
radio-5.1204.164d3.31
emmc dis
cpu dis
hw sec enabled
modem p off
now i can go to fastboot mode -> but after showing checking sd card: update P46IMG tries to install and failed
-> always i go into fastboot mode
-> now i have installed clockworkMod Recovery 5.8.4.0
can reach into recovery
can flash boot now also
but cant flash another os , always fails with 24 verifying android txt failed and aborted
-> i think the custom rom i have tried to install always tries to install after reboot
cid is vodap102
ty for help
noobtotal said:
Thanks for answer,
bootloader now unlocked,
now:
endeavoru pvt ship s-on RL
hboot -1.72.0000
cpld-none
microp-none
radio-5.1204.164d3.31
emmc dis
cpu dis
hw sec enabled
modem p off
now i can go to fastboot mode -> but after showing checking sd card: update P46IMG tries to install and failed
-> always i go into fastboot mode
-> now i have installed clockworkMod Recovery 5.8.4.0
can reach into recovery
can flash boot now also
but cant flash another os , always fails with 24 verifying android txt failed and aborted
-> i think the custom rom i have tried to install always tries to install after reboot
cid is vodap102
ty for help
Click to expand...
Click to collapse
install philz 5.15.9 recovery after this mount sd card and copy your custom rom to sd card after this flash boot.img from fastboot after this go in recovery and flash the rom if you want KK rom you must flash latest TWRP or CWM but ther have problem with mount sd card.
And sonmething else when you go to bootloader your phone must be disconnected from PC and when you are in bootloader conect to PC and you will see fastboot usb
problem solved!TY!
Thant said:
install philz 5.15.9 recovery after this mount sd card and copy your custom rom to sd card after this flash boot.img from fastboot after this go in recovery and flash the rom if you want KK rom you must flash latest TWRP or CWM but ther have problem with mount sd card.
And sonmething else when you go to bootloader your phone must be disconnected from PC and when you are in bootloader conect to PC and you will see fastboot usb
Click to expand...
Click to collapse
Thanks for help!
now on CM 10.2.1 endeavoru again tried philz and there i could see my sdcard , so i can push new rom to sd card;tried to flash the cm version, always failed code 23 or 7 ->
-> flash was possible after i haved deleted "asserts...............................; in the android-txt file (found here in xda forum) , i think there is proofed which version of rom and h-boot is on the phone . i deleted it (the first 4 lines up to :good: and saved it to the rom.zip-> then , no prob to flash the cm.zip via sd card; then flashed boot image from cm , deleted cache and factory reset , restart and now cm again
thanks for help !!!!!! great job! great forum here!