Related
Never thought I'd be the one to create a thread like this..
After I flashed the OKV4 ROM, strange things started to happen (this was after a full wipe). Apps kept force closing, etc. Later that day, when I picked up my phone, I saw the samsung logo flashing over and over. Making me unable to enter recovery.
Download mode still worked though and I proceeded to flash a stock firmware via ODIN. This did not help. Oh, and the Odin flash succeeded, without rebooting my phone though...
So, I'm still stuck with my phone which can't seem to get out of this strange loop.
HELP :C
I remember reading somewhere here that if you have flashed a diff FW now and then a possibility the last recent kernel is still in the system folder etc....this is maybe the cause of the bootloop.
Since you had confirmed going to download mode is possible..this may work logically... Why not do the following :
Get your phone rooted via Recovery (there is a thread here by The-E)..Once done flash arco68's CWM Recovery....Boot to recovery n do this :
Factory Format....Wipe n Clear including Delvik...Then go to Mount n Storage wipe every single folder...System...Data...Etc (this will wipe every single data left behind but I assure you the CWM will not be wiped) once done reboot n put the device into DL mode and use Odin to flash back to the stock FW.
From this moment the recovery will be replaced by stock version and the stock FW will be restored....once it boot up..Walla as I had done this over two times :
Best of Luck !!
Sent from my GT-I8150 using xda premium
I think you misunderstood me :/
This isn't the ordinary bootloop where the boot animation plays. It resets literally 2 seconds after starting. This makes me unable to enter the recovery at all. Thanks for the effort tho.
Tl;dr:I can not enter recovery mode.
treUse said:
I think you misunderstood me :/
This isn't the ordinary bootloop where the boot animation plays. It resets literally 2 seconds after starting. This makes me unable to enter the recovery at all. Thanks for the effort tho.
Tl;dr:I can not enter recovery mode.
Click to expand...
Click to collapse
Hi Bro...
I already discuss it in this Tread couple a days a go
You not alone bro
I ask The-E to mention all Wonder user to get safety flashing
Until this time we didn't get way to fix it yet
I have Cyanogenmod 10.1 (stable) installed; the other day it crashed while I was on Instagram, rebooted itself, and wouldn't go past the spinning circle screen. Tried rebooting it, now it won't go past the screen before that, with the blue Cyanogenmod man and the Samsung logo.
I have TWRP 2.5.0.0 installed with it, which I don't know how is possible being that the file systems are incompatible, so unless I used Odin to install CM10.1, I don't know how I did it without installing Clockworkmod Recovery over TWRP.
I've been trying to fix it for a couple days now (I'm kicking myself for not getting around to posting here sooner). When I go into TWRP it asks me for a password (which I've never set, I assume it's asking me because that's all it knows to do when the file system is incompatible), which I click cancel at every time, and when I try to do just about anything (including installing new ROMs or recoveries from within TWRP) it gets errors when trying to mount any partitions on the device, so I can't change anything on the phone at all.
I've tried re-installing TWRP AND Clockworkmod Recovery with Odin, and they succeed, but when the phone tries to reboot, the screen just turns off and nothing happens, and I have to take the battery out to do anything else.
So right now I'm totally screwed unless I can fix this thing. I'd like to not have to drop 200 on a Nexus 4 after only a year or having this phone I bought brand new, especially with the Nexus 5 already coming out later this year...can somebody help me???
EDIT: I should clarify that I can access recovery and download mode
If you can get into download mode you can flash a stock image to your phone and restart from scratch. Download the proper stock image from here http://forum.xda-developers.com/showthread.php?t=1968625 and flash it in odin.
FoxTrotz said:
If you can get into download mode you can flash a stock image to your phone and restart from scratch. Download the proper stock image from here http://forum.xda-developers.com/showthread.php?t=1968625 and flash it in odin.
Click to expand...
Click to collapse
I should've clarified that I've tried this with a bunch of roms, and it just shows SBA2 in the status box forever. I left it for a full hour before and it never changed.
According to this page http://www.alliance-rom.com/community/wiki/bricked-android/ reformating your external sd card may help. It also links to something I personally have never heard of but apparently this: http://forum.xda-developers.com/showthread.php?p=15330252 can help unbrick any samsung phone that's flashable with odin.
Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
gica69 said:
Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I found out that the phone had 4.1.1 on it and the guy tried to flash 4.2.2 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
gica69 said:
I found out that the phone had 4.11 on it and the guy tried to flash 4.22 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
Click to expand...
Click to collapse
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3
PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Larry2999 said:
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Click to expand...
Click to collapse
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
gica69 said:
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
Click to expand...
Click to collapse
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Larry2999 said:
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Click to expand...
Click to collapse
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
gica69 said:
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
Click to expand...
Click to collapse
You didn't mention if you tried the Kies option. I had a similar problem once when upgrade to 4.1.1 via Kies failed during the process and that was how I was able to recover. However, since you bought this from the secondary market, there is no way of telling for certain what the previous owner did wrong which would have been useful for recovery options.
One of the nice things about Odin is that you usually know the results immediately. If it says Pass, therefore, that's likely what it means. So Odin did flash something. But what did it flash? The counter you saw in download mode shows how many custom system installations there have been and 6 does show there has been some previous heavy tinkering with the phone. As you are still able to get into download modes, I would suggest you try flashing custom recovery (TWRP or CWM) via Odin. If this works and you are able to get into recovery mode, you may then try doing a hard wipe/reset via recovery. You may also try flashing the other (rooted) 4.1.1 file via Odin. At this stage, you really have nothing to lose in trying all options. I guess if you can get into recovery mode, the problem is almost solved as this leaves plenty of options.
A jig wouldn't help as that only gets you to download mode which, for now, you don't have a problem with. JTag should always be a last resort option only. Let me know how far it goes and good luck!
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
audit13 said:
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
Click to expand...
Click to collapse
This damn phone is starting to annoy me. I can still get into download mode but my phone gets usb device not recognized now. I have access to another I747 phone so my question is if I have access to the pit file from that phone can anything be done with the Debrick utility and a SD card with only download mode access? Thanks in advance.
Go into download and let us know what is shown on the screen.
audit13 said:
Go into download and let us know what is shown on the screen.
Click to expand...
Click to collapse
Odin Mode
Product Name: SGH-I747
Custom Binary Downloads: Yes (6 Counts)
Current Binary: Samsung Official
System Status: Official
Qualcomm Secure Boot: Enable
Green Android Icon Downloading...
Do not turn off target!!!
OK I plugged the USB in and out a few times and it allows to write every few tries. Back to my question can I do something in download mode if I have another i747 that I can copy stuff from? I also tried the suggestion to uncheck auto-reset pull the usb cable then the battery and try to go to recovery but it doesn't.Any suggestions are welcomed.
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
audit13 said:
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
Click to expand...
Click to collapse
I will try it again I think I already did but when I put the battery back and click the Vol+ Home Power I get the blue writing and then black screen. Should I wait like 10 min on the black screen or it should be quick. Thanks
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
audit13 said:
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
Click to expand...
Click to collapse
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
If u can get it into download mode u are never ever hard bricked my friend...take it from a guy who had to dust off his old galaxy sll last weekend & still can't get into d/l mode on my s3 after a week & even with a jig lol
Sent from my SGH-T989 using xda app-developers app
gica69 said:
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
Click to expand...
Click to collapse
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Larry2999 said:
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Click to expand...
Click to collapse
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
gica69 said:
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
Click to expand...
Click to collapse
I couldn't find one either although you may be able to create yours using the command line posted in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
You may also try using a jig to get back into download mode. Have you, however, considered exercising any buyer protection options you have on the phone since, it would appear, the guy sold you a lemon?
Is there any solution for boot loop in gt-i9192?
My phone was rooted. I was using s5 rom proyect and my recovery was Philz Touch Recovery. I was happily using this rom for arround 8 months. Recently my phone was responding slow and my storage was almost full. One day while watching youtube videos my phone got hang! I just removed the battery and tried to restart. But there was a failure and no vibration. The phone is simply dead. I connected my charger and of :crying:course there was no indication. Later I went through several post to learn how to revive my phone from hard brick. I downloaded debrick.img file and made a bootable memory card. This time I was able to switch on my phone but it went through bootloop. The recovery mode takes too long to load and wiping cache and dalvik cache or even reset was not possible because of some error like E: failed to mount ......
Then I went into the download mode. and installed a firmware from sam mobile. Later I flashed CWM recovery through odin successfully.
But this bootloop still exists. Whenever I try to go into recovery mode it still takes a long time. And istead of loading CWM recovery it loads philz recovery mode that was previously installed
Please help I am tired
mbiotanveer said:
Is there any solution for boot loop in gt-i9192?
My phone was rooted. I was using s5 rom proyect and my recovery was Philz Touch Recovery. I was happily using this rom for arround 8 months. Recently my phone was responding slow and my storage was almost full. One day while watching youtube videos my phone got hang! I just removed the battery and tried to restart. But there was a failure and no vibration. The phone is simply dead. I connected my charger and of :crying:course there was no indication. Later I went through several post to learn how to revive my phone from hard brick. I downloaded debrick.img file and made a bootable memory card. This time I was able to switch on my phone but it went through bootloop. The recovery mode takes too long to load and wiping cache and dalvik cache or even reset was not possible because of some error like E: failed to mount ......
Then I went into the download mode. and installed a firmware from sam mobile. Later I flashed CWM recovery through odin successfully.
But this bootloop still exists. Whenever I try to go into recovery mode it still takes a long time. And istead of loading CWM recovery it loads philz recovery mode that was previously installed
Please help I am tired
Click to expand...
Click to collapse
Dude,
I am also having a bootloop problem on my S4 Mini GT-I9192...
My TWRP recovery was working, I was using version 3.0.0.0 for serrano3gxx, but when I tried installing a custom rom, the right rom for gt-i9192!!!! for some stupid reason the twrp recovery keeps thinking that my phone is gt-i9190 !!!! it is so stupid!!!
for this stupid reason I couldn't install the ROM !!!
I decided to install the right recovery for my gt-i9192, so I downloaded openrecovery-twrp-2.8.7.0-serranodsxx-STABLE-signed
now, there was a warning to not install the zip using the recovery, but how could I install the recovery if I am unable to install anything with Odin!!!!
Nothing at all!!! I can't install anything with Odin, it just gets stuck!!!! So frustrating!!!!
And now afer I installed it said the installation completed successfully, but..... I can not even get the phone in recovery mode!!!!
What happened??? can anyone please help!!!
I am stuck in this stupid bootloop problem, and now on top of it I can't even go to recovery mode!!!! Nothing!!!
It is useless to do anything with Odin either, it recognises the phone, it says Added! but cannot install anything, it just gets stuck
WHAT CAN I DO?????
PLEASE HELP IF YOU CAN.
Check out
You can try this:
1. Download this file: openrecovery-twrp-3.0.0-0-serranodsxx-STABLE-signed.zip and copy the file in sd card
2. Then go to recovery mood.
3. Install the zip file from sd card.
4. hope you will be able to install the correct recovery mood.
mbiotanveer said:
You can try this:
1. Download this file: openrecovery-twrp-3.0.0-0-serranodsxx-STABLE-signed.zip and copy the file in sd card
2. Then go to recovery mood.
3. Install the zip file from sd card.
4. hope you will be able to install the correct recovery mood.
Click to expand...
Click to collapse
I think you didn't understand... My phone is not going into recovery at all!!!
I had this problem once when I flashed an incompatible kernel, but I forgot how I got out of it. Best suggestion I have is take out the battery and put it back.
The "hard brick" you suffer the first time was likely a dead battery. The phone looks hard bricked when a battery is below critical energy, and not enough power is available to charge it with an USB. At that point, you had to wait for the energy in the battery to store up again, and then plug it into the USB to charge. Just a little power was necessary to get it charged again.
If you can still access download mode, flash the stock ROM baseband of your phone (you should know what this is). Your data will be wipe but at least you will be able to use the phone again.
Teracotta said:
I had this problem once when I flashed an incompatible kernel, but I forgot how I got out of it. Best suggestion I have is take out the battery and put it back.
The "hard brick" you suffer the first time was likely a dead battery. The phone looks hard bricked when a battery is below critical energy, and not enough power is available to charge it with an USB. At that point, you had to wait for the energy in the battery to store up again, and then plug it into the USB to charge. Just a little power was necessary to get it charged again.
If you can still access download mode, flash the stock ROM baseband of your phone (you should know what this is). Your data will be wipe but at least you will be able to use the phone again.
Click to expand...
Click to collapse
Bro hard brick was not a low battery case. I kept it connected to the charger for almost a day. Can you please just say how to solve the problem. I am totally disappointed.
Samsung Galaxy s4 mini (GT-I9192)
Also help me please i wanted to flash the firmware that i just downloaded from sammobile but if i started flashing, my phone stays the same like nothing happen. please help meee.. I've working on it since last month
Hi, anybody here can solve the problem? I have a S4 Mini I9195, is in a bootloop, can enter Download Mode, but not in Recovery Mode, I try flash stock ROM, Recovery y Custom Recory, I used both ODIN and Haindell, always said OK in both flash, but I still canĀ“t enter in Recovery Mode
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Blaccko said:
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Click to expand...
Click to collapse
Have you tried to reflash twrp via odin ? If that works go into twrp reformat your partitions, then flash a custom rom.
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Blaccko said:
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Click to expand...
Click to collapse
Are you trying to get to twrp from powered off state ? If not , get to power off state, then use key combo again to try to get into twrp.
Also when you flash twrp, in odi , there is a setting to prevent auto reboot, use that and try to get to twrp via key combo from download. Mode., finally tripple chech the key combo you are using is correct
Hi,
Thanks for the help. I tried to get to TWRP from power off state. The TWRP splash screen appears, and stays on for about 5-10 sec. After that, the splash screen disappear and the tablet reboot to get stuck on the Samsung logo again. It's like if the TWRP booting process doesn't go through...
Thanks again for your help,
Ouch !!
Looks like you got a real problem , and getting into territory I'm not expert in, Ashyx is the real authority with twrp for this device, you can try to pm him and hope he takes pity on you ( he has been helping guys on this qa thread tirelessly for over a year, and is prob taking a well deserved break ).
Otherwise a few more suggestions,
Maybe your PIT is messed up , ( but you prob would not make it to twrp splash screen in that case )
Twrp may still be trying to execute the script from the original linage update and not finding something bails ( total guess ).
Try flashing a stock ( downloaded from sammobile or somwhere you trust ) rom via odin, and see if you can get into the stock recovery. From there do a factory reset and see if you can get stock running.
Try getting into twrp with device connected to pc ( helped in some wierd cases, you never know lol ).
When TWRP splash screen comes up, try some key combos , maybe twrp checks for a script abbort key combo ?
Checkout the TWRP github issues page, see if your bug is there and a solution, create a bug report or mail a dev directly.
Have a look at the TWRP code, maybe some clues ??
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Blaccko said:
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Click to expand...
Click to collapse
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Hi, thanks a lot for your time.
I will try that at work tomorrow as I don't have Windows at home. However, I did try to flash stock ROM with Windows initially (see first post for more info) and it didn't solve my problem. I wasn't able to access recovery mode after the stock ROM was flashed. Hope it's gonna work now and I'll be able to factory reset.
I'll let you know tomorrow afternoon.
Thanks,
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse
WOW!!! Thank you so much Ashyx. I can now finally use my Tab S. I'm so grateful!!! Thousand time thank you! I deeply appreciate your help for resolving my problem.
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse