HELLO FRIENDS
I HAVE N7100 AND OVER 1 YEAR I HAD 32GB MICRO SD CALSS 10
I HAD 13MB\S WRITE SPEED AND EVERYTHING WAS GREAT
LAST MONTH I HAD TO USE MORE THEN 40GB SO I Bought SANDISK 64GB MICRO SDXC
I FORMATED IT TO EXFAT AND THE DEVICE WORKS GREAT WITH HIM
BUT WHEN I CONNECTING THE DEVICE TO PC THE WRITE SPEED IS 7MB\S
AND WHEN I OPEN THE GALLERY APP IN THE DEVICE -- THE PICTURES LOADS VERY SLOW...
THE CARD IS GENUINE AND ORIGINAL
WHAT CAN I DO?
http://www.ebay.com/itm/New-SanDisk...ass-10-30MB-s-SDSDQUA-064G-U46A-/251144066147
help?
please?
I'll take a stab at this...
lidor578 said:
HELLO FRIENDS
I HAVE N7100 AND OVER 1 YEAR I HAD 32GB MICRO SD CALSS 10
I HAD 13MB\S WRITE SPEED AND EVERYTHING WAS GREAT
LAST MONTH I HAD TO USE MORE THEN 40GB SO I Bought SANDISK 64GB MICRO SDXC
I FORMATED IT TO EXFAT AND THE DEVICE WORKS GREAT WITH HIM
BUT WHEN I CONNECTING THE DEVICE TO PC THE WRITE SPEED IS 7MB\S
AND WHEN I OPEN THE GALLERY APP IN THE DEVICE -- THE PICTURES LOADS VERY SLOW...
THE CARD IS GENUINE AND ORIGINAL
WHAT CAN I DO?
http://www.ebay.com/itm/New-SanDisk...ass-10-30MB-s-SDSDQUA-064G-U46A-/251144066147
Click to expand...
Click to collapse
When connecting the device via USB cable, don't expect the transfer speeds to be that great. MTP is the default transfer protocol if you didn't change it. If you need to move files off of your MicroSD card quickly, its best to remove the media card from the Note 2 and put it into a card reader. As for the gallery app on the device, from what I have experienced is if you are using the card for the first few times it may take some time for the picture thumb nails to enumerate completely, especially when you have a lot of photos/videos.
This is purely from experience. I hope this helps a bit.
flashred said:
When connecting the device via USB cable, don't expect the transfer speeds to be that great. MTP is the default transfer protocol if you didn't change it. If you need to move files off of your MicroSD card quickly, its best to remove the media card from the Note 2 and put it into a card reader. As for the gallery app on the device, from what I have experienced is if you are using the card for the first few times it may take some time for the picture thumb nails to enumerate completely, especially when you have a lot of photos/videos.
This is purely from experience. I hope this helps a bit.
Click to expand...
Click to collapse
but why ?
if i use the reader the speed is up to 10mb
if i use the reader with the adata 32gb the speed is 18mb !
about the reading pictures ---# why its happens ?
and why the thums sits on my internal memory ?
i dont know what to do )-:
lidor578 said:
but why ?
if i use the reader the speed is up to 10mb
if i use the reader with the adata 32gb the speed is 18mb !
about the reading pictures ---# why its happens ?
and why the thums sits on my internal memory ?
i dont know what to do )-:
Click to expand...
Click to collapse
?????????????????????
Related
Hi guys,
I'm thinking of upgrading my 512mb SD card to 2gb, but I'm not certain that the phone (Qtek 9090) will be able to work with such a large card.
Does anyone here have a 2gb card working? Any brands/models that are known to work or fail?
Thanks in advance for your help.
2gb SDCard...
Hi!
I'm currently using a 2gb SanDisk SD Card, everything works great. Oddly enough, I cannot find a card reader to connect to my PC that can read them!?!? I'm still using 2003SE and transfer movies and MP3's to the phone by using the painful multi-hour process of Exploring via ActiveSync. Uggh! This is fixed in ActiveSync 4.1 but ONLY if you are running WM5... Just having 2003SE and 4.1 will still be totally laggy for file copy.
Enjoy!
2gb SDCard...
Hi there, I also have a 2Gb Sandisk card in my XDAIIs, I also have a card reader which I purchased from PC World for £10.
Works a treat!!
Re: 2gb SDCard...
terryd1980 said:
I also have a card reader which I purchased from PC World for £10.
Works a treat!!
Click to expand...
Click to collapse
Hi! Do you have a brand name or model number of the card reader you mentioned so I can search for it on the Internet? So far I've purchased 2 different readers and neither can speak "2gb" :shock: The one I can use for 1gb cards but not 2gb cards is Belkin F5U248 rev.2, so I know that one wont work!
Thanks in advance!
Does anyone know what speed the BA supports for its SD cards?
The transfer speed is limited by the SD card type
The transfer speed should be contained within the card specification sheet
As I understand it, the maximum transfer speed is 22.5MB per second
This is for a 133X SD card, so compare accordingly
thanks for the reply. I just wanted to make sure that there wasnt a limit on the SDIO bus on the BA.
I'm planning to buy a 2gb Sandisk, but i'm not too sure whether the ultra version will work, as the compatibility list on their website only shows the standard. So i might just get the standard one to be on the safe side.
I currently use 4Gb SD card! I had only hard time finding flash card reader for my PC, which can read such a big card
I believe PPC devices has no problem with big SD cards. At least my Mio 168 PPC with GPS (PPC 2003) understand 4G card too.
But I do not believe flash manufacturers X rating. I NEVER seen real speed more than 3 Mb/s on any type of device. My card have rating x133 (22.5Mb/s). And I have no idea on what device and how did they measure that speed?
From the 2g->4gb reports it sounds like sd card size is not so much an issue for the BA, more for the SD->USB adaptor.
I have the same awful USB activesync file transfer rates reported on this thread, despite running WM5, so it sounds like my current adaptor might need upgrading.
Anyway, thanks for helping out, and I now have a 2gb 133x SD on order for next week ;-)
The typical transfer rate is 2MBps
Quotes like 133X and 150X are NOT a multiple of this but the coefficient comparison between the read and write speed
As an example for a 2MB SD card
Uploading 2MB data takes 1 second
Reading data, for that same setup, takes 1 second
For the 133X the write speed is the same, but the read time is 0.4 seconds and for the 150X card it is 0.33 seconds
This also assumes the SD interface meets SDIO v1.01
If not then the 133X and 150X cards take the same time to read as the standard card
2gb Card Reader
Hi there ottGalaen,
My card reader is made by PC Line, I think it's PC World's own brand, the Model number on the back is PCL-CR400.
Here's a link to it...
http://www.pcworld.co.uk/martprd/st...null&sm=null&tm=null&sku=818835&category_oid=
If that doesn't work just go to www.pcworld.co.uk and search for PCL-CR400
I hope this helps
Kind regards
Terry
4GB SD here with a cheapie card reader/writer. No problems at all.
2gb sd
i use a 2gb sd card sandisk with no problems
Re: 2gb SDCard...
ottGalaen said:
Hi!
I'm currently using a 2gb SanDisk SD Card, everything works great. Oddly enough, I cannot find a card reader to connect to my PC that can read them!?!? I'm still using 2003SE and transfer movies and MP3's to the phone by using the painful multi-hour process of Exploring via ActiveSync. Uggh! This is fixed in ActiveSync 4.1 but ONLY if you are running WM5... Just having 2003SE and 4.1 will still be totally laggy for file copy.
Enjoy!
Click to expand...
Click to collapse
Yo, what type of SD card that you using now (Sandisk Ultra II) ?
Just so you guys know my 4GB SD card is a Transcend 150x.
Well, I just bought an 8 Gig Class 6 Ridata Lightning microsdhc card...that got pretty good reviews, actually... and which also tests out to be a Class 6 card on SD Card Speed Test. The huge problem, for me, is that when I plug the card into my card reader on my pc, which is rather new..., I get TERRIBLE transfer speeds...even slower than any Class 2 that I've used. Any ideas? Should I request a replacement even though it's testing out as a Class 6? Is it my card reader? Is there any requirement for an internal card reader to read sdhc cards? Anyone with any insight would be very much appreciated. Thanks!
jreed3786 said:
Well, I just bought an 8 Gig Class 6 Ridata Lightning microsdhc card...that got pretty good reviews, actually... and which also tests out to be a Class 6 card on SD Card Speed Test. The huge problem, for me, is that when I plug the card into my card reader on my pc, which is rather new..., I get TERRIBLE transfer speeds...even slower than any Class 2 that I've used. Any ideas? Should I request a replacement even though it's testing out as a Class 6? Is it my card reader? Is there any requirement for an internal card reader to read sdhc cards? Anyone with any insight would be very much appreciated. Thanks!
Click to expand...
Click to collapse
It might be your card reader/computer. On my Class 4 I get speeds that surpass the transfer regular speed. If you have a sd card reader in your laptop/desktop try updating the drivers. If the reader goes into the usb slot, then get a new reader, or try out a different computer...This will help isolate the problem and your headaches.
Thanks, bro...
Ace42 said:
It might be your card reader/computer. On my Class 4 I get speeds that surpass the transfer regular speed. If you have a sd card reader in your laptop/desktop try updating the drivers. If the reader goes into the usb slot, then get a new reader, or try out a different computer...This will help isolate the problem and your headaches.
Click to expand...
Click to collapse
Yeah, thanks, I'll try finding drivers for it, there's an ! in device manager under USB...so I'll try to get it to recognize the hub drivers.
Goo day to you all
as the title i got today a new sandisk ultra for my galaxy s3.
when i inserted it into the phone i see i have a storage of 58.7 or something.
but when i use my card reader and windows i see only 27.8Gb.
i want to format the card to exFat for the option to transfer larger then 4Gb files but i can't because i want to use all the 64Gb space.
the card is original for sure!
thanks
Try mount the card via the phone by usb mass storage to the pc
Maybe its your reader
Sent from my GT-I9300 using xda premium
james341 said:
Goo day to you all
as the title i got today a new sandisk ultra for my galaxy s3.
when i inserted it into the phone i see i have a storage of 58.7 or something.
but when i use my card reader and windows i see only 27.8Gb.
i want to format the card to exFat for the option to transfer larger then 4Gb files but i can't because i want to use all the 64Gb space.
the card is original for sure!
thanks
Click to expand...
Click to collapse
I had this issue too, it was because my card reader didn't support SDXC specifications. I had to use the built in reader in my fairly new laptop to format.
Ricey said:
I had this issue too, it was because my card reader didn't support SDXC specifications. I had to use the built in reader in my fairly new laptop to format.
Click to expand...
Click to collapse
What version of Window you are using?
First of all the card reader is old so maybe you are right and I'm using windows 7.
I have also an old mac book.
Maybe I will try with my wife Acer laptop in the evening
james341 said:
Goo day to you all
as the title i got today a new sandisk ultra for my galaxy s3.
when i inserted it into the phone i see i have a storage of 58.7 or something.
but when i use my card reader and windows i see only 27.8Gb.
i want to format the card to exFat for the option to transfer larger then 4Gb files but i can't because i want to use all the 64Gb space.
the card is original for sure!
thanks
Click to expand...
Click to collapse
you won't get the full 64GB, after formatting you should about 59.5GB.
used my wife laptop
everything went well
it was the card reader
thanks
likwaiw said:
What version of Window you are using?
Click to expand...
Click to collapse
Windows 7 x64
I have the 64GB class 10 from BB when they ran the 49.99 promotion a couple of weeks ago. I used the Easeus to format the card as FAT32 in one minute. And it had 59.48GB , which is what it's supposed to be. Idk if it's the same for the ultra . Just FYI
Sent from my SPH-L710 using xda app-developers app
So I have this SanDisk Ultra 16GB Class 10 microSDHC Card from Best Buy, which was on sale for $20 when I bought it two months ago. Formatted the card as soon as I put it inside the phone. I started to transfer some music albums from my PC and the write speeds are very slow, averaging only 1.8 MB/s. I'm not getting anywhere near Class 10 write speeds. Don't have a USB SD card reader that supports SDHC, so I don't have the option to take it out and use the SD adapter. I tried using an SD speed increase app and changed the cache to 2048 KB, but same result. Didn't want to bring up this issue until now.
Anyone have any solutions to this? If it helps, I'm running CM 10.1 (Android 4.2.1), Nitest 12-31 kernel for CM 10.1 Preview Build.
Makes a huge difference because you will need a usb 3.0 port on your computer for that to work
Sent from my SPH-D700 using Tapatalk 2
phonehunter59 said:
Makes a huge difference because you will need a usb 3.0 port on your computer for that to work
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
I don't think so. My Transcend 4GB C10 and Lexar 16GB C10 are writing at 10MB/s just fine on USB 2.0 reader and ports.
Sent from HTC Incredible S @ CM10
AndyYan said:
I don't think so. My Transcend 4GB C10 and Lexar 16GB C10 are writing at 10MB/s just fine on USB 2.0 reader and ports.
Sent from HTC Incredible S @ CM10
Click to expand...
Click to collapse
I get about 6-8 MB with a class 4 on usb 2.0 ports
Sent from my SPH-D700 using Tapatalk 2
InsaneHien said:
So I have this SanDisk Ultra 16GB Class 10 microSDHC Card from Best Buy, which was on sale for $20 when I bought it two months ago. Formatted the card as soon as I put it inside the phone. I started to transfer some music albums from my PC and the write speeds are very slow, averaging only 1.8 MB/s. I'm not getting anywhere near Class 10 write speeds. Don't have a USB SD card reader that supports SDHC, so I don't have the option to take it out and use the SD adapter. I tried using an SD speed increase app and changed the cache to 2048 KB, but same result. Didn't want to bring up this issue until now.
Anyone have any solutions to this? If it helps, I'm running CM 10.1 (Android 4.2.1), Nitest 12-31 kernel for CM 10.1 Preview Build.
Click to expand...
Click to collapse
My Take...
1.Transferring multiple small files will always be slower in transferring speed than a single big file.
2. Using your phone as an alternative to sd card reader will be a lot slower at transferring files to your PC. I always prefer to take out the memory card out of my phone and connect it with an sd card reader instead of attaching a direct usb cable to my phone.
3. install "SD Card Tester" from the play store, try to close all the other open apps and test your memory card with it within your phone. My results with my Micro Center branded class 10 card were ~6MB for Writing and ~7MB for reading of 348MB test file... I'm sure though if I test it again with my PC it would meet the advertised 10MB writing speed.
First, sorry for my bad english. i hope you will understand my problem.
I am using a genunie sandisk 32gb micro sdhc card. used it with my old xperia t too...
Started using it with my Note 2 since 2 months. But i got an error yesterday, that my card is removed because format is not ok. i did nothing with the card or not removed from my phone. My phone was also turned on since 4 days. And today asked me for formatting micro sd card. i had no time to check it on my computer so i choosed format it. Note 2 has formatted it. After that it didnt see my card.
In the storage menu it shows no ext.card. i tried to format my micro sd card on windows and on macbook but they dont see my card.
I lost my photos and some files... i dont care about them now, i just want to format my card but i think its dead now...
Anyone has experience? What shall i do now?
Now i see this again, choosing format but nothing happens...
Sent from my GT-N7100 using Tapatalk 2
Do you see it listed in Disk Management in Windows? It could be that it is not being mounted as a drive, but seen as a RAW partition by the system, in which case you can format it from Disk Management and start using it again. Don't look for the card under Volumes, but where disks are listed, in which section you'll see Disk 0, Disk 1 and so on. Good luck
Try to format your card using SD Formatter https://www.sdcard.org/downloads/formatter_3/
Thanks for your replies. I will try it when i arrive to home from my work.
Sent from my GT-N7100 using Tapatalk 2
mr.inter said:
Do you see it listed in Disk Management in Windows? It could be that it is not being mounted as a drive, but seen as a RAW partition by the system, in which case you can format it from Disk Management and start using it again. Don't look for the card under Volumes, but where disks are listed, in which section you'll see Disk 0, Disk 1 and so on. Good luck
Click to expand...
Click to collapse
nope, shows nothing. no luck.
if i insert sd card to note 2 than i see that notification. (i attached screenshot.) i am trying again format on note 2 but nothing happens. i will be crazy
I had a 64GB SanDisk card. I bought it in December. Last week, somehow, it became write protected! I could not format it, either in the phone or Windows and could not write any data to it.
I phoned SanDisk and they said they would replace it. I managed to copy the data off it. I told them I couldn't send the card back to them, as I couldn't delete the data. They just asked me to photograph the card before and after I cut it in half. Now they are sending me a new card.
However, as there seem to be many problems with SanDisk cards, I will never use one again. I bought a Samsung 64GB instead.
sent from somewhere
Don't think its the phone, rather the SD card itself.
after getting a Samsung MicroSD card, there are no further problems.
the Sandisk card even has problem being detected by a windows 7 machine
Sandisk and Lexar are both garbage! They have the worst quality control ever. I don't even understand how they are so popular.
I have mailed to Sandisk support, they wanted photos of card with serial number and where i bought it.
than they want me to break my card and send again photos of broken card. Now, they will send me new card...
Had the problem myself with a 32 gb sandisk class 10. The phone said the card was damaged. I used the card adapter that came with the card and when inserted in my pc card reader, surprise: it worked like nothing happened! Saved data, format it with sdformater and i use it now.
I mention a kingston card adapter didn't do the job. It kept saying the card was not formatted.
voyager20021 said:
Had the problem myself with a 32 gb sandisk class 10. The phone said the card was damaged. I used the card adapter that came with the card and when inserted in my pc card reader, surprise: it worked like nothing happened! Saved data, format it with sdformater and i use it now.
I mention a kingston card adapter didn't do the job. It kept saying the card was not formatted.
Click to expand...
Click to collapse
Yes SD Formatter is kind a low level formatter. If flash storage is not physically damaged, SD Formatter solves most of the problems
defo not the phone but the card itself. Has happened to me more then once. Some card's are just ****
well from personal experience. I have to say first hand, i honestly think its the phone. the same thing happened to me. i have the att note 2 and a centon 32gb class4 card and out of nowhere, i get a message that my card was removed unexpectedly and now my card doesn't work on ANY DEVICE. I've tried multiple card readers, different software, different computers, even tried a mac, took my memory card to s specialist. NO DEVICE recognizes anything even connected. now i thought, ok maybe a faulty card but my wife with same phone and a sandisk 32gb class 10, SAME THING happened. my friend with a Kingston 32 gb and a sprint note 2, his memory card died as well. THREE different brands, and same type of phone. too much of a coincidence, could be it really cant handle 32gb. now im using i think 8 and its working fine for now.
google this problem and youll see its a bigger problem then you think. BACKUP YOUR DATA, i had to learn hard way. :crying:
luilui8812 said:
well from personal experience. I have to say first hand, i honestly think its the phone. the same thing happened to me. i have the att note 2 and a centon 32gb class4 card and out of nowhere, i get a message that my card was removed unexpectedly and now my card doesn't work on ANY DEVICE. I've tried multiple card readers, different software, different computers, even tried a mac, took my memory card to s specialist. NO DEVICE recognizes anything even connected. now i thought, ok maybe a faulty card but my wife with same phone and a sandisk 32gb class 10, SAME THING happened. my friend with a Kingston 32 gb and a sprint note 2, his memory card died as well. THREE different brands, and same type of phone. too much of a coincidence, could be it really cant handle 32gb. now im using i think 8 and its working fine for now.
google this problem and youll see its a bigger problem then you think. BACKUP YOUR DATA, i had to learn hard way. :crying:
Click to expand...
Click to collapse
Happened the same yesterday. Trascend class 4 32Gb SDHC. Completely dead.
Checked with a macbook, but the card isn't detected anymore.
In my opinion, the NoteII may haves some problem with sd card (maybe the voltage regulators aren't correctly programmed, or something similar).
But frankly, I do not have any proof to support this, just a sensation.
Cheers
chkdsk
erhangulsum said:
First, sorry for my bad english. i hope you will understand my problem.
I am using a genunie sandisk 32gb micro sdhc card. used it with my old xperia t too...
Started using it with my Note 2 since 2 months. But i got an error yesterday, that my card is removed because format is not ok. i did nothing with the card or not removed from my phone. My phone was also turned on since 4 days. And today asked me for formatting micro sd card. i had no time to check it on my computer so i choosed format it. Note 2 has formatted it. After that it didnt see my card.
In the storage menu it shows no ext.card. i tried to format my micro sd card on windows and on macbook but they dont see my card.
I lost my photos and some files... i dont care about them now, i just want to format my card but i think its dead now...
Anyone has experience? What shall i do now?
Click to expand...
Click to collapse
I had the same thing happen to me. Put the card on a windows machine, and run
chkdsk /f
this makes the disk readable again. At least, it did for me. One problem was that even though the disk was readable, it seems some
files had errors, so the media scanner ran forever and used up lots of battery when the fixed card was used. I ended up not using that card any
more.
Same problem with me... 32gb microsd hc class 10 sandisk... In sn2 n7100 it says blank card or unsupported filesystem... In windows 7 laptop... It is not detected.... Chkdsk does not work in cmd prompt as the card is not detected... Unable to do anything with the card as it is not detected... Cannot format, cannot see in disk manager. Card is also not read in other phones.
PLEASE help as it had a lot of information and i have NO money to buy a new card.
Sent from my GT-N7100 using xda premium
Samsung and SanDisk ultra disk 32gb don't go well together. .... IT will fail after a few days
happens on s3, note 2 and note 8
I got Samsung 32gb class 6 cards for my note 2 and 8... No issues .
Sent from my GT-N5100 using Tapatalk 2
same thing
same this is my second card in 11 months.the first a 32 gig sandist and the 2nd a 64 gig Samsung class 10.both dead,they are unreadable.i beleave its the phone
Here the same
Galaxy Note II i317m Telcel
MicroSD 16 GB Kingston Class 10
Actually, 2 MicroSD, the first time I Check the Warranty of the Card with the dealer, this time the card is out of warranty.
And is the same problem, the card is unmounted, check on PC and is Dead