I may have messed this one up big time.I have read other threads and they aren't helping. I attempted to root my kindle fire using the kindle fire utility. Something weren't wrong about the time it was installing firefirefire. Now it's not accepting fastboot commands or adb for that matter. It just says <waiting for device>. This is all rather sad to me. I'm like a child who has broken his favorite toy. If someone with a little more skill could help me, that would be wonderful.
Factory Cable
So a factory cable has failed to work as well, although that may be from bad build quality.
Provide more info please http://forum.xda-developers.com/showthread.php?t=1644970
Afterburner anonymous said:
I may have messed this one up big time.I have read other threads and they aren't helping. I attempted to root my kindle fire using the kindle fire utility. Something weren't wrong about the time it was installing firefirefire. Now it's not accepting fastboot commands or adb for that matter. It just says . This is all rather sad to me. I'm like a child who has broken his favorite toy. If someone with a little more skill could help me, that would be wonderful.
Click to expand...
Click to collapse
This is a typical problem with the way Windows handles
drivers. For some reason, when switching from normal to fastboot mode (necessary for firefirefire), the drivers stop working and need to be reinstalled. Sometimes it works smoothly, but most of the time, getting the drivers to work in fastboot mode seems impossible. Just keep working at it
Afterburner anonymous said:
So a factory cable has failed to work as well, although that may be from bad build quality.
Click to expand...
Click to collapse
A factory cable simply puts the device in fastboot mode, which it's already in.
josepho1997 said:
Do a hard reset on you kindle fire whiles its plugged in. Then update the drivers again. Now open up another KFU run.bat and select 1(bootmode) and 1(normal). Now your Kindle Fire should finish rooting.
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
TKS Man!
FFF now works in my kindle.
Hi. So the other day I installed TWRP on my Kindle Fire successfully. The KF was at 10.2.6, I'm not sure if that means it's a Kindle Fire 2 or not. Anyways, when I went to flash FFF, I stupidly flashed the .zip as a bootloader, thus making my Kindle Fire completely unusable. When I press the power button, nothing at all happens. Nothing I do will make the screen turn on or the power button to flash in any way. I've tried using Firekit with usbboot and the shorting trick, but that hasn't worked for me. (I just installed stock Ubuntu to a flash drive with the fk file on root, I'm fairly certain that's all that needed to be done?)
Anyways, my Kindle is unresponsove, and the usbboot trick has yet to work for me. I really want to save this guy. I've heard the KF cannot be completely bricked through software/flashing. I hope it's true! Any help would be greatly appreciated. Thank you.
if that is your software version then yes you have kindle fire 2, i'd wait for someone with more experience on here to post, but it sounds to me like you are going to need a factory cable
chris_m128 said:
if that is your software version then yes you have kindle fire 2, i'd wait for someone with more experience on here to post, but it sounds to me like you are going to need a factory cable
Click to expand...
Click to collapse
Thanks fro replying. I'm pretty sure a factory cable only puts it into fastboot if you have a working bootloader. I don't, so I don't think it would work.
I remember an instance where a friend of mine had a broken bootloader, and we used a factory cable to restore it, this was on the kindle fire. we had to first reflash the bootloader. I hope this is possible here.
---------- Post added at 11:59 AM ---------- Previous post was at 11:58 AM ----------
but you'll have to ask someone with more experience than me sorry.
jophish said:
Hi. So the other day I installed TWRP on my Kindle Fire successfully. The KF was at 10.2.6, I'm not sure if that means it's a Kindle Fire 2 or not. Anyways, when I went to flash FFF, I stupidly flashed the .zip as a bootloader, thus making my Kindle Fire completely unusable. When I press the power button, nothing at all happens. Nothing I do will make the screen turn on or the power button to flash in any way. I've tried using Firekit with usbboot and the shorting trick, but that hasn't worked for me.
Click to expand...
Click to collapse
I think you need a Factory cable to recover.
If you connect the Kindle to the PC and try adb devices in a terminal window, what do you see?
From the software version, you have KF2, as such you need to use the tools and ROMs from the KF2 threads. You could try to use the one click freedom boot and TWRP installer, to see if you can get that on.
From there you would probably have to push one of the 10.1 ROMs on, or the 10.2.6 recovery image, and then start again.
This seems to be happening a lot, and could be avoided if people read a bit more before using the wrong tools.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
chronicfathead said:
I think you need a Factory cable to recover.
If you connect the Kindle to the PC and try adb devices in a terminal window, what do you see?
From the software version, you have KF2, as such you need to use the tools and ROMs from the KF2 threads. You could try to use the one click freedom boot and TWRP installer, to see if you can get that on.
Click to expand...
Click to collapse
Howdy. I just fashioned a factory cable, just jumping +5V to pin 4, right? It seems to be doing absolutely nothing. No lights or anything are turning on. The freedom boot just spits out "error: device not found" and hangs on "Pushing Stack". Again, I was under the impression that the factory cable only made it boot in fastboot if you already have a working bootloader. I'll try loading into Ubuntu and see what it says in terminal. Thanks
EDIT: So, when I type adb devices into terminal, I get:
The program 'adb' is currently not installed. You can install it by typing:
sudo apt-get install android-tools-adb
You will have to enable the component called 'universe'
Could this have been my problem to begin with?
EDIT 2: Well, I installed ADB. There are no devices found when I enter that command, and the shorting trick with still doesn't work. Ugh.
jophish said:
Howdy. I just fashioned a factory cable, just jumping +5V to pin 4, right? It seems to be doing absolutely nothing. No lights or anything are turning on. The freedom boot just spits out "error: device not found" and hangs on "Pushing Stack". Again, I was under the impression that the factory cable only made it boot in fastboot if you already have a working bootloader. I'll try loading into Ubuntu and see what it says in terminal. Thanks
EDIT: So, when I type adb devices into terminal, I get:
The program 'adb' is currently not installed. You can install it by typing:
sudo apt-get install android-tools-adb
You will have to enable the component called 'universe'
Could this have been my problem to begin with?
EDIT 2: Well, I installed ADB. There are no devices found when I enter that command, and the shorting trick with still doesn't work. Ugh.
Click to expand...
Click to collapse
Leave your Kindle plugged in for an hour using the normal cable, as it may be totally flat.
The attached diagram shows what pins need joining. If you can, make sure none of the other pins are shorting.
Hold the power button for 20 seconds, plug in your fastboot cable, power on the Kindle.
You should see some traffic lights on the screen.
If you can get fastboot enabled, you should be able to push the correct partitions back on using the partitions from the factory restore image, your backup files or from the recovery thread. Hope you get it running.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
chronicfathead said:
Leave your Kindle plugged in for an hour using the normal cable, as it may be totally flat.
The attached diagram shows what pins need joining. If you can, make sure none of the other pins are shorting.
Hold the power button for 20 seconds, plug in your fastboot cable, power on the Kindle.
You should see some traffic lights on the screen.
If you can get fastboot enabled, you should be able to push the correct partitions back on using the partitions from the factory restore image, your backup files or from the recovery thread. Hope you get it running.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
Click to expand...
Click to collapse
I tried the fastboot cable out on a working Kindle Fire, and it worked correctly, so I did wire it right. I did as you said, holding the power button down and then plugging in the cable, and nothing happens still on the KF2. I have access to the insides, should I unplug the battery? It should be around 85% charged. Thanks again.
Edit: BIG NEWS~ Not really. When I plug the Kindle Fire with the fastboot cable into Windows, it appears under Device Manager as "Unknown Device" with a yellow triangle, but nothing shows up on the Kindle, no lights or anything. Hmph.
jophish said:
I tried the fastboot cable out on a working Kindle Fire, and it worked correctly, so I did wire it right. I did as you said, holding the power button down and then plugging in the cable, and nothing happens still on the KF2. I have access to the insides, should I unplug the battery? It should be around 85% charged. Thanks again.
Edit: BIG NEWS~ Not really. When I plug the Kindle Fire with the fastboot cable into Windows, it appears under Device Manager as "Unknown Device" with a yellow triangle, but nothing shows up on the Kindle, no lights or anything. Hmph.
Click to expand...
Click to collapse
You could have tried sending it back to Amazon, but you say you have opened it.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
chronicfathead said:
You could have tried sending it back to Amazon, but you say you have opened it.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
Click to expand...
Click to collapse
Urgh. I closed it up. Is there any way they'd know if I'd opened it?
I'm in exactly the same boat as you, also flashed FFF (by accident) on my device. Haven't been able to fix it yet but I do have a factory cable. Also did the USB trick, but that didn't have an effect either.
chronicfathead said:
I think you need a Factory cable to recover.
If you connect the Kindle to the PC and try adb devices in a terminal window, what do you see?
From the software version, you have KF2, as such you need to use the tools and ROMs from the KF2 threads. You could try to use the one click freedom boot and TWRP installer, to see if you can get that on.
From there you would probably have to push one of the 10.1 ROMs on, or the 10.2.6 recovery image, and then start again.
This seems to be happening a lot, and could be avoided if people read a bit more before using the wrong tools.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
Click to expand...
Click to collapse
In my case, I did by accident because it wasn't clear to me which KF generation I had (I've bricked mine just after christmas). These forums were not really clear either, I had a Kindle Fire so I just looked for a KF guide. After I bricked it I found out my device was a second generation Kindle Fire.
plinders said:
I'm in exactly the same boat as you, also flashed FFF (by accident) on my device. Haven't been able to fix it yet but I do have a factory cable. Also did the USB trick, but that didn't have an effect either.
In my case, I did by accident because it wasn't clear to me which KF generation I had (I've bricked mine just after christmas). These forums were not really clear either, I had a Kindle Fire so I just looked for a KF guide. After I bricked it I found out my device was a second generation Kindle Fire.
Click to expand...
Click to collapse
Hi, to clarify: you cannot boot into TWRP? No logos at boot at all? No boot?
I would send it back to Amazon...
Same Here..
I was thinking that all kindle fire are the same... installed fire fire fire using KFU and device got bricked....!
Hope someone here could help us get our devices up and running again...
yudanjah said:
Hi, to clarify: you cannot boot into TWRP? No logos at boot at all? No boot?
I would send it back to Amazon...
Click to expand...
Click to collapse
Nothing whatsoever.
I can't really send it back to Amazon, because of two reasons:
1) I already opened up the back
2) It was gifted to me from the US, and there is no Dutch Amazon, so I'd have to send the device back to the person who gifted to me, that person has to mail it to Amazon from there, and the replacement device has to come back the same way (via that person). That's not a situation I'd like to put that person in.
jophish said:
Urgh. I closed it up. Is there any way they'd know if I'd opened it?
Click to expand...
Click to collapse
I am sure they can figure it out. Can you boot into TWRP?
If so, you can still recover...
Dame problem
plinders said:
Nothing whatsoever.
I can't really send it back to Amazon, because of two reasons:
1) I already opened up the back
2) It was gifted to me from the US, and there is no Dutch Amazon, so I'd have to send the device back to the person who gifted to me, that person has to mail it to Amazon from there, and the replacement device has to come back the same way (via that person). That's not a situation I'd like to put that person in.
Click to expand...
Click to collapse
Same problem dude, did you fix it?
i.robert said:
Same problem dude, did you fix it?
Click to expand...
Click to collapse
Not yet I'm afraid. Everything I tried so far hasn't worked.
yudanjah said:
Hi, to clarify: you cannot boot into TWRP? No logos at boot at all? No boot?
I would send it back to Amazon...
Click to expand...
Click to collapse
No, Absolutely nothing. I really would like to get this working.
jophish said:
No, Absolutely nothing. I really would like to get this working.
Click to expand...
Click to collapse
same here we need a new firekit for the kf2
Help..
any updates on the fix? I hope someone out there could help us revive our bricked kindle fire 2... :angel:
kindle fire 2
flashed wrong bootloader (fff)
no power
no lights
no adb
shorting trick is not working for me :crying:
Well I've searched the forums and I can't find anything similar, which leads me to think I'm just missing something really obvious, but this is really frustrating me so I need help.
I'm trying to use the Kindle Fire Utility v0.9.6 to install TWRP and FireFireFire bootloader to my first-gen Kindle, so I can install Hashcode's Jelly Bean. I think I've got the normal drivers working as it shows up as ADB: online, although Boot mode: unknown is also reported. When enter "Install TWRP" it says it's putting the kindle into fastboot mode, but my Kindle seems to have other ideas. It just reboots normally and the utility is stuck on "waiting for device".
I've read one of your fastboot guides, which said that inserting the factory cable then inserting into a computer should activate fastboot mode. Well I tried that with what I think was the original cable, and it just booted normally.
I some small experience with rooting, but basically I'm a noob. I do have some Linux systems handy if they're required.
Any help would be appreciated!
Can't help much since i don't have a kf1..
But i CAN tell you that the ORIGINAL cable is not the same as a factory cable.
--
Sent from my Kindle Fire 2, CM 10.1
mindmajick said:
Can't help much since i don't have a kf1..
But i CAN tell you that the ORIGINAL cable is not the same as a factory cable.
--
Sent from my Kindle Fire 2, CM 10.1
Click to expand...
Click to collapse
OK thank you, I didn't know that.
However I think even if I did get hold of one of these factory cables, it wouldn't help much as I need to get this program to work primarily...
any ideas what might be causing adb to be online but boot status unknown?
Personally, KFU v0.9.5 worked better for me.
Exactly the same result with that version, I'm afraid. :crying:
Are you using a USB 3.0 port? Maybe that's why. USB 3.0 is high speed, so maybe the connection got messed up...
How old is your computer?
Sent from a bird... No, a plane... Wait, It's a Kindle Fire!
I'm afraid that's not it... It's a 4 year old mid-range Win7 64 bit laptop. I did root my phone using this computer... I think I'll try using one of the XPs that I have on hand to see if that makes a difference.
Well I've tried on two XP computers and I can't even get the drivers to install.
Oops...
OK thanks for your input guys, you've been really helpful.
I feel really stupid now - my kindle is actually a kindle fire 2. That makes sense. For some reason I thought that a second-gen kindle fire was the kindle fire HD, and therefore mine was a kindle fire.
Sorry for wasting your time.
ben08112 said:
OK thanks for your input guys, you've been really helpful.
I feel really stupid now - my kindle is actually a kindle fire 2. That makes sense. For some reason I thought that a second-gen kindle fire was the kindle fire HD, and therefore mine was a kindle fire.
Sorry for wasting your time.
Click to expand...
Click to collapse
How'd u figure that out?
Well I saw everyone talking about software version 6, and I thought it strange that mine had software version 10. I then did some research and found that there were two kindle fires that look identical. Apparently one way to distinguish is by looking at the software version.
I was given this by a friend who tried rooting it and flashed a zip file instead of the bin file. Now it will not power on, however I am able to press power and volume button and windows will detect omap4770 in the device manager however it will disappear and then reappear over and over. I've tried to install the omap4770 driver but that doesn't seem to get it to stop disappearing and reappearing. My friend stated the usb short trick should fix it, I did order the factory cable from Amazon to get it into Fastboot mode. Is anyone able to assist me, or has had this problem before?
Sent from my SPH-L710 using xda app-developers app
Its hard bricked, and fastboot cables don't work on 8.9" models, and the USB short trick is only for kindle fire 1's, ironically it basically makes the device show up how yours is already showing up, as a omap device, but unlike how we can use the omap device on the kf1, we can't on the newer models because the initial file we push has to be signed by amazon. If you can exchange it with amazon they might give you a free replacement, but since it was given to you I don't know. If amazon won't replace it there is a method in development for unbricking a hard bricked kf, it was initially meant for kf2, but should work on all kindles, but the person working on it needs a kindle fire 8.9 inch to try to make the fix for it, its kinda like a hardware mod, he's working on making a solderless version, anyways if amazon won't replace it he might be able to fix it and it would also possibly benefit the community in general. Read this thread to find out more if you are interested: http://forum.xda-developers.com/showthread.php?t=2391047
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
kindle fire logo come on but then it shuts off
Hi i think i flashed the wrong recovery or I'm not even sure what I did, however I now I'm able to turn the kindle fore HD 8.9 on the kindle fire logo does come on and the computer detects it but then it says device unplugged. I did install the drives that you posted still nothing. can you advice on any options that i may have if any and also should i buy the factory cable i keep reading that they dont work on the kindle fire HD 8.9. Thank you for any help that you may porovide
What exactly did did you try to do after installing the drivers, also was the device you installed the drivers to initially called something like jem before or after you installed the drivers?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
What exactly did did you try to do after installing the drivers, also was the device you installed the drivers to initially called something like jem before or after you installed the drivers?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
What I did was the following found in http://forum.xda-developers.com/showthread.php?t=2106463
Cordless (APK)
Instructions:
Download
Install on your KF2
Open Tweezermod Installer
Press install
What about the device you installed, was it called jem, if so you should be able to get into fastboot by running "fastboot -i 0x1949 getvar product" with the kindle off and unplugged, then plugging it in after the command prompt says waiting for device. From there you can just reflash it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app