Hello, I am new here.
So I flashed this psx rom 4.4.2 geehrc. Its good, but my issue is that the rear camera cannot connect for some reason. Only the front camera works. I have googled and searched alot, but I have only found answers for s3 users with the same issue. I have tried all of those fixes, but none of them have worked for me.
Thanks for the help!
Tried clean reflash ?
TheGripper said:
Tried clean reflash ?
Click to expand...
Click to collapse
Yes I tried that too, and flashing other kernel doesn't work either. I think that it is not about perimissions, because I have also fixed permissions in recovery.
Thanks for the help
Okay, so now I just flashed the vanir kitkat rom and the camera works again. It might be the google camera I flashed to psx that broke it
Related
This isn't my first time messing with ROMs and ROOT stuff. On my HTC EVO 4G I messed with everything.
Anyway, my question. Does anyone have a good 4.4.2 ROM that is fairly stable? I tried CM11 but the camera kept crashing and I use my camera daily. I also tried Gummy but it would hang on the first time boot activation attempt. I tried skipping the activation and my 3G worked for a little while then quit working completely. If there are any ideas how to get those two ROMs to work I'm all ears.
I am coming from this 4.3 ROM
Thanks,
shawnc022
shawnc022 said:
This isn't my first time messing with ROMs and ROOT stuff. On my HTC EVO 4G I messed with everything.
Anyway, my question. Does anyone have a good 4.4.2 ROM that is fairly stable? I tried CM11 but the camera kept crashing and I use my camera daily. I also tried Gummy but it would hang on the first time boot activation attempt. I tried skipping the activation and my 3G worked for a little while then quit working completely. If there are any ideas how to get those two ROMs to work I'm all ears.
I am coming from this 4.3 ROM
Thanks,
shawnc022
Click to expand...
Click to collapse
same here, just stay on cm11 and go to my little guide I made for my fix on the camera crashes, all I ask is post in that guide when done to thank me and verify it works...which it will lol
http://forum.xda-developers.com/showthread.php?t=2611870
I decided to just flash CM 10.2. So far its working good and everything I use daily is working as it should. Thanks though for you're links and suggestion.
shawnc022 said:
I decided to just flash CM 10.2. So far its working good and everything I use daily is working as it should. Thanks though for you're links and suggestion.
Click to expand...
Click to collapse
i tried that rom too, i had the same issues with that camera lol but not everyone had that issue...all good, whatever works best for you! I did just update that thread though, added a camera apk file I ripped out of hellfires cm based 4.4.2 kitkat that works really well on my cm11 setup :good:
i tried Cyanogenmod 11 nightly, , CM11 Linaro and SlimKat 4.4, and everywhere i have the same problem, only the front camera works. in stock roms like LRS, everything is fine, as expected. i tried different camera apps, but the problem remains the same, the camera doesn't work, only the front camera does. there isn't even a button in the camera app to switch between back and front camera, as if i only have one.
is there a fix or a workaround for this? not having a camera is a dealbraker for me, but i really don't want to stay stock. i flashed multiple times, used different gapps versions, did factory resets and reboots, nothing seems to help, the stock version was 4.4.2 v50020. anyone else experiencing such problems?
WEIRD!!!!
I'm having the same problem. My Gpad came from the factory with 4.4.2 installed. and when I try to put any custon rom, this problem is with the camera. any solution? :crying:
Yes. The same problem. Maybe cyanogen team (Bug: CYAN-4444) can find solution.
same problem here, tryied every rom and kernel and nothing. only stock firmware back camera works.. can anyone help us?
read in one SlimKat thread that using the Google Camera from play store would work with all the custom roms, since it uses a different API than other apps.
Haven't tried myself, but you can give it a try
Google camera doesn't work better for me. This is very annoying
effraie said:
Google camera doesn't work better for me. This is very annoying
Click to expand...
Click to collapse
For me neither. Also in the latest builds where infected said the back camera should be fixed, it doesn't work for me.
The problem with camera is present on not only custom roms. It exists on official v50010a firmwares after downgrade. Possibly it's driver\kernel problem, which is caused distinction in camera's modules. Maybe new revisions of the G Pad use some other modules, than older ones.
Any directions to fix it ?
IMHO, they need to get out driver for camera from official 20a. But how it function with kernel, this is the big question that must be solved.
So, there is nothing i can do, except waiting somebody solving that issue ? No mistake on my side ?
Having no back camera is really not a problem to me, but i can't stand having something misconfigured...
Both cameras working for me slimkat 6.2
Not for me....
Some have problem... most don't, something different about your gpads ?
Sent from my Kin[G]_Pad ™
Rear camera not working too
Hi
For me the rear camera won't work too.
My G Pad is a V50020d with stock 4.4.2. I installed the Cyanogenmod 11 via CWM Philz Touch.
Same problem here
tried cm11, paranoid e now um on mahdi, no back camera on any of 3 roms
I haven't tested other custom roms, but Infected's CM11 M9 won't fix the back camera for me.
My G Pad (stock V50020a) is made in Brazil, there might be something to do with this driver or component-wise.
There is a source codes of the last firmware and kernel for the g pad on the lge site.
Maybe, it will help developers to add support for our camera module in the cyan kernel.
Same problem here... Spanish lg g pad 1 month of use
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
zohaibkhan143 said:
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
Click to expand...
Click to collapse
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
help
culot said:
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
Click to expand...
Click to collapse
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
zohaibkhan143 said:
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
Click to expand...
Click to collapse
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
help
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
Ok bro thanks for helping me
zohaibkhan143 said:
Ok bro thanks for helping me
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
zohaibkhan143 said:
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
Click to expand...
Click to collapse
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Thanks I will try it soon..!
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
zohaibkhan143 said:
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
Click to expand...
Click to collapse
Oh, no, you misunderstood: you don't use the CWM, you only install it and then quickly install *over* it with one of Freegee's recoveries. Never use the Sphinx CWM, as you'll get errors when you go to flash roms. You only insatll the Sphinx CWM so that Freegee will recognize your device and function, it's only a stepping stone to Freegee, not a recovery you should use on its own.
And, in light of recent developments on the TWRP 2.8 front, I'd say give that a try instead. It mounts your external SD just fine. THe only things I've flashed with it are BlissPop builds and Gapps, but all without an issue yet. Go for the one with the Play theme and enjoy its gorgeous colors.
Thanks buddy.. Freegee recognized my device and installed cwm succesfully
Sent from my LG-E980 using XDA Free mobile app
help
after kitkat update now I m installed those custom roms again but still there is a same wifi problem sick off totally !
Hi I don't know if this is the appropriate place to post this but I was wondering if anyone had a known fix for the camera for my t-mobile galaxy S3. It used to work before the last two snapshots of CM, now it just says Camera has stopped working on all Camera applications. Maybe I should go back to the last stable? That was a while now.. Thank you in advance! Also Have tried flashing Slimkat, seemed to work but I care for the ROM much. Maybe can someone point me in the direction of a good ROM to use?
Try Nexus Camera
I was on CM 11 M12 and was having a similar issue. Any time I would try to change the flash status the camera app would fail (Cannot Connect to Camera) and not come back until I rebooted the phone. I switched from CM11 M12 to Pac Rom 4.4.4 KTU84Q and had the exact same issue. Tried the CM Camera Fix App (CMFix) and that did nothing. I went and got the Nexus Camera App from the Play Store and haven't had any issues with the camera since. It's kind of weird because it appears to be the EXACT same camera but it worked for me.
Hi there, I've try many android 6.0 ROM on my LG F180 (Korean version Optimus G). Seems like everyone of them's rotation function is not working. If I flash back to 5.X rom or kitkat roms. Then it gets back to normal. Does anyone got the same problem? Does anyone know how to fix it? Or I did something stupid? Thanks!
Mine is working just fine with Nitrogen OS (E975)
Hi there!
I am having these issues ever since I flashed 5.1 unofficial CM12. The rotation and auto-brightness went broken. Here's what helped recently:
- did a backup of my ROM in TWRP
- plugged the phone to a PC and got all my data properly copied, including the TWRP backup (it turned out to be essential, but that's just my fault)
- downloaded original KK firmware for my phone edition, also downloaded LGFlashTool 2014
- went back to stock using instructions from XDA
- rooted again and got TWRP recovery up and running
- did a full wipe, yes, including internal storage (yet I don't know if you need this, I just went for it)
- flashed the ROM I chose (im my case it was the CM12 backup I had cause of gapps issues with 6.0)
Don't know why but the sensors worked perfectly for me at that moment. I have broken them again by flashing another custom ROM over the CM12 and today I am going to give it another go.
Also, while browsing XDA I came across various posts stating that when you downgrade to stock or actually even another ROM based on official KK and only then flash the custom ROM it should all work again. In my case it seems like a coincidence, or the internal storage wipe worked miracles.
Good luck!
Mine is working. Did you tried the XenonHD 5.11 or the XenonHD 6.0 rom?
got the same problem
rext3r said:
Mine is working. Did you tried the XenonHD 5.11 or the XenonHD 6.0 rom?
Click to expand...
Click to collapse
I did try on XenonHD 6.0 rom, but the rotation still doesn't work. All others Kit Kat or Lollipop ROM are fine for me. BTW, Are U having F180? or E975?
kitty_kitty said:
I did try on XenonHD 6.0 rom, but the rotation still doesn't work. All others Kit Kat or Lollipop ROM are fine for me. BTW, Are U having F180? or E975?
Click to expand...
Click to collapse
I've got the E975.
Did you do a full wipe?(dalvik cache , etc..)
I think you did , because you tried everything , but maybe not
I've got a massive battery drain issue with 6.0 Xenon HD. (50-70% overnight)
I've installed all the same apps as on my previous rom.(1-2% overnight)
Anyone else?
how about the camera? do you are able to do photosphere or panorama pictures with google camera app??