April 2 2015 - NEW VERSION 5.1! Ready for Lollipop 5.1!!!!!
Quick list of features:
Overclock up to 1.8GHZ
Voltage control
Custom GPU overclock
Dynamic Fsync Control
Interactive and ROW tweaks
I/O and MMC tweaks for better performance
Auto detects whether you are using data2sd, f2fs or EXT4 - meaning you don't need an f2fs version anymore. At boot time the kernel detects your file system and boots based on what YOU have. Also works with data2sd.
Extra governors and I/O Schedulers
Chanegelog
2015-04-02 - Version 5.1
- Updated the Wifi modules to work with CM12 and Omnirom
2014-10-01 - Version 5.0
- Updated to work with Lollipop.
2014-10-01 - Version 4.0
- Fixed the Bluetooth not turning on issue
- Fixed a few of the dock keys not working (such as disabling the touchpad)
- Added Pegasusq Governor
- Added SIO, VR and BFQ I/O Schedulers
- Made BFQ the default
- Created a separate build based on Linaro 4.8.3 Toolchains
2014-09-12 - Version 3.0
- I don't remember now LOL!
Everything should work fine, but this kernel has only been extensively tested on Omnirom and Zombi-Pop.
*NOTE - If you are running this kernel on Katkiss, Version 5.1 likely will not work. You will need 5.0 as 5.0 still uses the wifi modules that katkiss needs.
Also at the end of this post is an app called Performance Profiles. I would suggest anyone who uses this kernel on OMNIROM to install this app, as it will allow you to change the CPU frequency so you aren't always stuck at 1.7GHZ. In CM this feature can be added to the quick settings panel so it is not necessary. It will allow you to toggle between 1GHZ(power save) 1.3GHZ(normal mode) or 1.7GHZ(performance mode). I apologize for the hideous UI, but I'm not a app creater or designer. - NOTE - NOW OBSOLETE
[/HIDE]
A huge thanks to krash1256 and uga_boy for your very kind donations!
XDA:DevDB Information
[Kernel][5.1.x][GRIMLOCK KERNEL], Kernel for the Asus Transformer TF300T
Contributors
hardslog, lj50036
Source Code: https://github.com/Hardslog
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 5.1
Stable Release Date: 2015-04-02
Created 2014-03-26
Last Updated 2015-04-06
Download Links!
FLASHING THE KERNEL FROM RECOVERY
Steps
1. Download the Kernel below and save to your internal or external SD Card. Do not unzip the file.
GRIMLOCK KERNEL DOWNLOAD
GRIMLOCK KERNEL Full Mirror 1
GRIMLOCK KERNEL Full Mirror 2 Courtesy of the LEGEN..... wait for it.........
DARY @lj50036 :laugh:
Thank you!! Already excited and flashing!
Here's a benchmark:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sweet!! Your awesome and TY very much for your hard work.
Sent from my TF300T using xda app-developers app
post deleted
Yay! Installing after work tonight.
Installed, looking good.
I have a feeling like core0 is stuck at 1,7GHz on SmartassV2, so I switched back to interactive. Third pic is first half SmartassV2 and second half Interactive.
I hope we can expect NTFS support in the future? Not tomorrow but someday?
Really good work, man! :highfive:
Running well on cm11 for me right now.
Sent from my TF300T using Tapatalk
My previous post was on Omnirom. Now I flashed CBM and it is working too.
Awesome! A cm11 kernel has been at the top of my "Things I want/need for my tf300t" list, since cm11 Roms started showing up. lol
Thanks so much bro! You rock.
Sent from my TF300T using XDA Premium 4 mobile app
stenc55 said:
Installed, looking good.
I have a feeling like core0 is stuck at 1,7GHz on SmartassV2, so I switched back to interactive. Third pic is first half SmartassV2 and second half Interactive.
I hope we can expect NTFS support in the future? Not tomorrow but someday?
Really good work, man! :highfive:
Click to expand...
Click to collapse
What App is that?
CPU_Governors
cmendonc2 said:
What App is that?
Click to expand...
Click to collapse
If you are referring to smartassV2... Refer to the rootwiki here....CPU_Governors
lj50036 said:
If you are referring to smartassV2... Refer to the rootwiki here....CPU_Governors
Click to expand...
Click to collapse
No, I'm talking about the CPU information app. I've been looking around so i don't need to go into settings.
Is ART compatible on this kernel?
cmendonc2 said:
What App is that?
Click to expand...
Click to collapse
Android tuner
tmoulder said:
Is ART compatible on this kernel?
Click to expand...
Click to collapse
My CM11 is running ART and with this new kernel CPU 1.7GHz also working very good.
adyjob said:
My CM11 is running ART and with this new kernel CPU 1.7GHz also working very good.
Click to expand...
Click to collapse
I went ahead and tried it as well, running ART, and it purrs like a kitten so far.
Seems good so far,been running since yesterday and none of my Gameloft games are laggy.Thanks for this
Does someone know the answer at this question: what the ratio between overclock and battery drain? I mean, if I overclock to 1.7Ghz, what %% i will lost on battery? Stock, with a normal use, i'm charging at 2-3 days. Overclock to 1.7, what can I expect of battery life?
Rambytes said:
Does someone know the answer at this question: what the ratio between overclock and battery drain? I mean, if I overclock to 1.7Ghz, what %% i will lost on battery? Stock, with a normal use, i'm charging at 2-3 days. Overclock to 1.7, what can I expect of battery life?
Click to expand...
Click to collapse
No one can answer that accurately, since battery life is solely dependant on individual usage/configuration/added battery savings tweaks or lack thereof/etc...
Sent from my TF300T using Xparent Skyblue Tapatalk 2
Related
IAP present Samurai Kernel For Jelly Bean
Samurai Kernel Control app now on google play,
please search google play with a search term such as Samurai Kernel Control to find this. Thank you all for your support.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOURCE: Samurai Git
DOWNLOAD: SAMURAI.AKIRA.G.NEX.10.10.20.10.GPU.512.zip Updated 10/10/2012 GPU 512
(compiled with Linaro toolchain 4.7 2012.09)
DOWNLOAD: SAMURAI.AKIRA.G.NEX.10.10.20.12.GPU.384.zip Updated 10/10/2012 GPU 384
(compiled with Linaro toolchain 4.7 2012.09)
DOWNLOAD: SAMURAI.AKIRA.G.NEX.10.07.07.45.GPU.512.zip Updated 10/07/2012 GPU 512
(compiled with Linaro toolchain 4.7 2012.09)
DOWNLOAD: SAMURAI.AKIRA.G.NEX.10.07.07.49.GPU.384.zip Updated 10/07/2012 GPU 384
(compiled with Linaro toolchain 4.7 2012.09)
DOWNLOAD: SAMURAI.AKIRA.G.NEX.10.01.16.56.GPU.512.zip Updated 10/01/2012 GPU 512
(compiled with Linaro toolchain 4.7 2012.09)
DOWNLOAD: SAMURAI.AKIRA.G.NEX.10.01.16.57.GPU.384.zip Updated 10/01/2012 GPU 384
(compiled with Linaro toolchain 4.7 2012.09)
DOWNLOAD: SAMURAI.AKIRA.G.NEX.10.01.05.41.zip Updated 10/01/2012
(compiled with Linaro toolchain 4.7 2012.09)
DOWNLOAD: SAMURAI.AKIRA.G.NEX.09.30.10.27.zip Updated 9/30/2012
DOWNLOAD: SAMURAI.AKIRA.G.NEX.07.18.16.4.zip <-- (BETTER TEMP CONTROL)
DOWNLOAD: SAMURAI.AKIRA.G.NEX.07.02.16.28 <-- (FIXED SLEEP FREQ RESET)
DOWNLOAD: SAMURAI.AKIRA.G.NEX.07.01.18.56
.:CHANGE LOG:.
~ Added in charging animation from samurai aokp rom when power is off...
~ Imoseyon fix for sleep freq reset....
~ misc fixes....
All the Ezekeel tweaks included including:
~ Sound Control
~ Color Control
~ FSYNC <-- (removed due to bricking)
~ Vibrator Control
Trinity Contrast Control Support to correct purple tint (trinity app only)
230mhz-1.8GHz
Pegasus, Samurai Governors included
VR I/O scheduler included
.:WARNING:.
You all know the risks I don't think we have to go through this once again but just in case, I am in no way responsible for any damage to your device that you may cause with this kernel. I in no way recommend overclocking, undervolting, or overvolting in any way, but it is fun isn't it ? ? ?
First
Thank you sir
Again Reserved for Future Use....
Awesome
Sent from my Galaxy Nexus using Tapatalk 2
Been running this beast since last nite. Not a problem to be found! Colors are great and the battery life seems to be really good so far running @1500 mhz. Thanks for another masterpiece EB!!
No problem as usual, I would like one thing from everyone around here that undervolts... I need some good voltage settings that don't reboot... I would like to lower the voltages but I'm always to busy working on stuff to mess with the voltages to find the sweet spot... I want it to run, no reboots, and still maintain it's overall freq integrity... ANY HELP IN THIS AREA IS GREATLY APPRECIATED.
Told you mine already they are pretty darn low... and work great
Sent from my Galaxy Nexus using xda premium
ÜBER™ said:
Told you mine already they are pretty darn low... and work great
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
did you send them to me ? and I'm also trying to get a general area of the sweet spot on a bunch of g-nex's not just yours, then I will make the call on what to change the stock samurai voltage to.
earthbound[iap] said:
did you send them to me ? and I'm also trying to get a general area of the sweet spot on a bunch of g-nex's not just yours, then I will make the call on what to change the stock samurai voltage to.
Click to expand...
Click to collapse
From 230 up to 1500...750,850,1050,1125,1150,1200,1300 been running these with no problems. I will start lowering from here since you want some feedback, and let you know.
Low enough ?
Running it right now
Nice been waiting for this one
Sent from my Galaxy Nexus using Tapatalk 2
iSaint said:
Low enough ?
Running it right now
Click to expand...
Click to collapse
Damn! I dont think I can beat that!
Coycaine said:
Damn! I dont think I can beat that!
Click to expand...
Click to collapse
Neither can I
What's a good app to control the screen colors? I have nst tools but that doesn't do color settings
Gnex 4.1
Very nice
Sent from my Galaxy Nexus using Tapatalk 2
Super smooth and stable. Appreciate the hard work :thumbup:
†††
Dammit I need to buy the trinity apk. The gladdos is not friendly. Why did I buy it.
I use them both and they both work well for me cept trinity always fc's when leaving the app
WARNING DO NOT USE THE FSYNC, JUST BRICKED THE **** OUT OF MY PHONE WITH IT(RECOVERED FROM IT THOUGH)...
I will remove fsync and post a new link to the kernel asap, for now just don't touch that button....
So to flash this I just flash rom then this over it?
Sent from my Galaxy Nexus using xda premium
UPDATE: New Kernel Link Up In The OP... Removed fsync due to a bricking issue...
THIS IS FOR UNLOCKED BOOTLOADER ONLY!!!
Credits
@FXP @Kali- @codeworkx @binary for all the work on the hardware bringup for yuga
@cdesai @Entropy512 @championswimmer for their work on the device tree
FreeXperia team
CyanogenMod team
TWRP team
@faux123 for using a lot of his features
@DooMLoRD for using some of his sources.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES:
All the functionality of the great CM/FXP kernel! Thanks a lot to them, who made this all possible!
Includes TWRP 2.6.3.0 recovery
Underclock to 192MHz for better battery life
Undervolt for better battery life
Intelli thermal module to prevent heat of device
Extra CPU governors: wheatly and intellidemand
Extra GPU governor: simple
Extra I/O scheduler: row
Fast charging
Fast charging for unkown (cheaper) chargers
Faux Sound 3.0 support
More smoothness by misc. tweaks
UPCOMING FEATURES:
Proper Overclocking upto 1952 MHz
GPU Overclocking
Sweep2Wake
Dual Recovery
..........
BOOTLOGO:
COMPATIBILITY:
This kernel is currently compatible with the following ROMS
PAC-rom (recommended, confirmed)
CM 10.2 (confirmed)
Carbon (confirmed)
All ROM's that are based on CM10.2
Not working on
My AOSP 4.3 rom
DOWNLOAD:
HERE
INSTALLATION:
1. Download the .zip and save it to your sdcard
2. Reboot phone to recovery
3. Flash the .zip from your sdcard
4. Laugh because of the installation images
5. Make loud MEOW sounds
6. Calm down your neighbourhood
4. Reboot and enjoy
if you like my stuff, you are welcome to Donate a beer or a coffee via PayPal
SOURCES:
HERE
XDA:DevDB Information
MEOW-kernel, a Kernel for the Sony Xperia ZL
Contributors
mithun46
Kernel Special Features:
Version Information
Status: Testing
Created 2013-09-19
Last Updated 2013-09-20
Changelog
0917:
- First release of MEOW-kernel
FAQ
Frequently Asked Questions will be added here soon.
Nice to finally see a proper supported kernel for Odin. Thank you, Mithun.
devilsshadow said:
Nice to finally see a proper supported kernel for Odin. Thank you, Mithun.
Click to expand...
Click to collapse
If you are happy, I am happy
Sent from my C6503 using Tapatalk 4
sweet... gonna try tomorrow..
Woohoo! Installed it this morning as soon as I saw it. I hadn't even gotten out of bed. Will be using it every day.
Is the Faux Sound included or just supported? Do I need to install anything? First time I've ever looked into that.
Already modified the CPU settings to run all four cores all the time, and underclocked a little.
havanahjoe said:
Woohoo! Installed it this morning as soon as I saw it. I hadn't even gotten out of bed. Will be using it every day.
Is the Faux Sound included or just supported? Do I need to install anything? First time I've ever looked into that.
Already modified the CPU settings to run all four cores all the time, and underclocked a little.
Click to expand...
Click to collapse
I suggest using kernel tuner from play store for over clocking etc etc
As for the faux sound. You need to buy the premium app for flux sound by faux123 from play store
Sent from my C6503 using Tapatalk 4
mithun46 said:
I suggest using kernel tuner from play store for over clocking etc etc
As for the faux sound. You need to buy the premium app for flux sound by faux123 from play store
Sent from my C6503 using Tapatalk 4
Click to expand...
Click to collapse
Already got a tuner app that I wasn't too fond of. I'll get Kernel Tuner instead.
Thanks mithun!
havanahjoe said:
Already got a tuner app that I wasn't too fond of. I'll get Kernel Tuner instead.
Thanks mithun!
Click to expand...
Click to collapse
Now get out of bed and start fixing my AOSP
Sent from my C6503 using Tapatalk 4
mithun46 said:
Now get out of bed and start fixing my AOSP
Sent from my C6503 using Tapatalk 4
Click to expand...
Click to collapse
LMAO I'm already at work. I haven't spent any time with AOSP for a while, I'll dive in again soon.
Dammit, I just finished switching back to stock, now this comes out. Time for yet another nandroid...
Edit: So I installed this with the latest PAC nightly and when I go into recovery I'm not able to see any of my storage, I can only browse through root folders, no files show up at all, I go to Mount and there's nothing listed...
TheTofu said:
Dammit, I just finished switching back to stock, now this comes out. Time for yet another nandroid...
Edit: So I installed this with the latest PAC nightly and when I go into recovery I'm not able to see any of my storage, I can only browse through root folders, no files show up at all, I go to Mount and there's nothing listed...
Click to expand...
Click to collapse
Building Fix.
Will be uploaded in a hour also doubletap2wake is also added
New version v1.09.20 uploaded:
Changelog:
DoubleTap 2 Wake (huge thanks to @alnikki25k)
Merge of Sony release 10.3.1.A.2.67
Several small fixes
Downloadlinks:
Check the Downloads TAB on top of this thread
or
HERE
If you download and like this, please give a review, press thanks and/or consider a donation! Thanks!
Awesome! TWRP is fixed.
I am loving DoubleTap 2 Wake! Thanks!
Wow, is there a way to disable double touch 2 unlock? If I had my device in my bag, it wake up unlock and do crazy things. And it kills battery life for me when display always on in bag.
Regards
Ported from my Xperia ZL with wireless data (it's magic)
SafiXS said:
Wow, is there a way to disable double touch 2 unlock? If I had my device in my bag, it wake up unlock and do crazy things. And it kills battery life for me when display always on in bag.
Regards
Ported from my Xperia ZL with wireless data (it's magic)
Click to expand...
Click to collapse
Look at zx kernel thread on yuga forums
Sent from my C6503 using Tapatalk 4
mithun46 said:
Look at zx kernel thread on yuga forums
Sent from my C6503 using Tapatalk 4
Click to expand...
Click to collapse
I guess you mean the XZ-Kernel
Is there any way to set the doubletap speed?
Like @SafiXS said, we don't want the phone wake in pocket or bag so I guess it is better to set the doubletap sensitivity.
This DoubleTap2Wake is awesome, reduce the use of power button to keep it living longer
Glad you guys like it . I meant xz kernel. No methods to adjust sensitivity as far as I know
Sent from my C6503 using Tapatalk 4
Tell me, please, how can I return to PAC kernel after flashing MEOW? Only using back-up or there is some other way?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi guys! Here comes the first custom kernel in xda for L-preview
I'm presenting my personal kernel Code_Blue, that started as an addon for Purity ROM, called Purified Kernel.
Some of you that know me from other Nexus devices asked me to bring back the project, so I (finally) did.
My releases are Dragon_Shield powered and I'm going to share them with you.
All I want is full smoothness, performance and battery on my hammerhead, so I build always with Linaro optimized Cortex A15 toolchains.
This time I aim for a "stockish" feel lean build and for stability purposes I will stay with GCC 4.9.2 for now.
Code is based of android-msm-hammerhead-3.4-l-preview, forked from android/kernel_msm.
Useful and powerful picks are mandatory
Be sure to join Code_Blue users G+ community
You keep the spirit alive!
Kernel features:
Build on Ubuntu 14.04.1 x86_64 (Dragon_Shield VPS @ www.servercore.com.br - thanks @ChristianLetti)
Build with toolchains 2014.09 Linaro Cortex-A15 GCC 4.9.2 by @Christopher83
Full -Ofast+graphite support with device and target flags enhanced, linaro build improvements, etc
Based on android-msm-hammerhead-3.4-l-preview + own commits & cherry-picks on demand from several top devs, code aurora, linaro...
Kernel compressed with LZ4-r123, custom tweaked RAMdisk with GZIP (faster boot times)
Removed some debug and logging options
Enhanced performance and battery patches
Several CPU Governors (blu_active own governor is default)
Voltage Control UV_mV_table by @franciscofranco (UV down to 700mV possible)
Enhanced TCP methods (westwood is default)
Network and Wifi tweaks
Several I/O control (FIOPS is default)
Removed stock mpdecision and thermald
blu_plug: Dynamic hotplug for hammerhead (based in dyn_hotplug from @stratosk), with screenoff battery saving (max_freq 1190400 @ max dual core)
powersaver_mode available (switch usefull on light tasks, set max_freq 1728 MHz @ single core)
L msm_thermal by @franciscofranco
Optimized RWSEM, AES and SHA1 routines
Vibrator Strength tunable (60% default)
KGSL fixes and reworked GPU driver (removed doubled freqs, goes to idle @ 27MHz)
Gamma Control by @myfluxi, Piereligio_TrueRGBv7 profile by default)
LCD_KCAL driver added (RGB calibration by @savoca)
Tuned min manual brightness
OTG USB flash drives support FAT32, ExFAT and NTFS: use stickmount
CDROM emulation added to mass_storage (Drive Droid compatible)
Kexec (multirom) full support by @Tasssadar
Faux Sound Control, with In-call and headphone volume controls by @faux123 (must use FauxSound beta app v1.2.3 and up)
doubletap2wake available (0:disabled, 1:enabled, 2:enabled fullscreen), option to disable with power button or after wake_timeout (based on @flar2 and @showp1984 work)
USB Fast Charge (USB mode up to 900mA with MTP, by @flar2), Increase battery charging current to use higher input current (on AC mode by @faux123), proprietary charger detection
init.d support (busybox run-parts required)
Kernel cleaner script by @neobuddy89
Compatible with Kernel Manager, Kernel Tweaker, TricksterMOD, Franco Display Control and FauxSound Control
Featured on Rom Directory by @tFrost
Download latest Code_Blue Kernel zip on Test folder, flash in recovery and profit :highfive:
No mirrors allowed. Don't post hardlinks, use original links.
Changelog is available @ website also.
Builds are coded as follows:
test only for now on tests folder, no changelog, build with Linaro Cortex-A15 4.9.2 to minimize issues in troubleshoot.
Warning: If you come from other kernel, you should dirty flash your ROM before flashing Code_Blue zip to avoid problems.
Reflash ROM -> flash SuperSU -> Boot device -> flash Code_Blue.
Also uninstall or clean data of any kernel control app you're using.
If you like my work and wish to donate, just hit one of the buttons:
In €
In $
Thanks to @franciscofranco, @faux123, @LaboDJ @show-p1984, @flar2, @anarkia1976, @stratosk, @neobuddy89, @myfluxi, @Christopher83, @Cl3Kener
Special thanks to @DariosF and @ciprianruse88, for the friendship, initial push, knowledge and art.
Awesome graphics and design by @ciprianruse88
git source
COOL!!!!!
This is going be epic. Right on. Thanks
Sent from my Nexus 5 using XDA Premium 4 mobile app
Awesome
Sent from my Nexus 5 using XDA Premium 4 mobile app
So who's going to be the brave user and try this? I'm surprised to see a custom kernel already for Preview L! Kernel source has already been released? i haven't been following
1024 here to stay! Thank you for the L release. :thumbup:
Sent from my Nexus 5 using XDA Premium 4 mobile app
will try this ofc
thank you sir
trying this as soon as i get off work
Glad there's a kernel out! So thanks! . but Max CPU is stuck at 1574400. If i change to Max it just goes back down after hitting apply?
Sent from my Nexus 5 using XDA Premium HD app
striped121 said:
Glad there's a kernel out! So thanks! . but Max CPU is stuck at 1574400. If i change to Max it just goes back down after hitting apply?
Sent from my Nexus 5 using XDA Premium HD app
Click to expand...
Click to collapse
What app are you using to control the frequencies?
DonSolo said:
What app are you using to control the frequencies?
Click to expand...
Click to collapse
Trickstermod.
---------- Post added at 05:20 PM ---------- Previous post was at 05:19 PM ----------
striped121 said:
Glad there's a kernel out! So thanks! . but Max CPU is stuck at 1574400. If i change to Max it just goes back down after hitting apply?
Sent from my Nexus 5 using XDA Premium HD app
Click to expand...
Click to collapse
same problem here in trickstermod.
beaverhead said:
Trickstermod.
---------- Post added at 05:20 PM ---------- Previous post was at 05:19 PM ----------
same problem here in trickstermod.
Click to expand...
Click to collapse
"set on boot" is selected? Also you might have to copy some cpu.sh files if nothing else works
DonSolo said:
"set on boot" is selected? Also you might have to copy some cpu.sh files if nothing else works
Click to expand...
Click to collapse
trickstermod CLEAR
DonSolo said:
"set on boot" is selected? Also you might have to copy some cpu.sh files if nothing else works
Click to expand...
Click to collapse
now it just right .sheduler row en governor ondemand and cpufrequentie is on.
beaverhead said:
now it just right .sheduler row en governor ondemand and cpufrequentie is on.
Click to expand...
Click to collapse
Great! I think every Kernel management app isn't going to be compatible with every kernel and vice versa without messing around with a couple of options
I don't know if it is just me, but faux sound doesn't seem to be working. App starts up and says that the kernel is supported, but messing around with the toggles doesn't cause anything to happen. I'm assuming that the app or patch needs to be updated to work with L, or I'm just stupid and an not doing something right.
Well done Rui, good Job as ever [emoji106]
Tapatalk Team SlimRoms
Holy ****! Running just as nice as on KitKat. Great job again my fav dev!
DonSolo said:
So who's going to be the brave user and try this? I'm surprised to see a custom kernel already for Preview L! Kernel source has already been released? i haven't been following
Click to expand...
Click to collapse
I didn't think it was.
jsgraphicart said:
I didn't think it was.
Click to expand...
Click to collapse
That's what I thought. When it comes to XDA and the developers of the Open Source world, anything is possible! .. Just flashed it and its running nice so far.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Elite Lollipop Kernels. Custom kernels for the Verizon HTC One, built for Android 5.0 - Lollipop. Currently have an AOSP and GPE versions.
Additional Features are as follows:
- CPU OC and UC 162-2106
- ROW, SIO, ZEN, FIOPS io schedulers
- OnDemand, Performance, Power Save, Intellidemand, Intelliactive, Intellimm, Smartmax, Lionheart, and Optimax Governors
- Max Screen Off CPU Frequency
- Advanced TCP Congestion controls
- Fast Charge
- GPU OC/UC with steps of 128, 200, 320, 400, 450, and 487
- Simple GPU governor
- Faux Sound Control
- User Space Voltage control
- Intelliplug HotPlug alternative & intellithermal
- Screen Wake options: Sweep2Wake, DoubleTap2Wake, Logo2wake, pocket detection, flick2wake, pick2wake, and Logo2Menu
- Thermal control by crpalmer
- ZRAM/ZCACHE/SWAP
- Neon drivers
- Linaro 4.9.2 - cortex a15 toolchain
- 02 Optimazations
- Kexec Hardboot
- LZ4 Compression
Downloads
Elite L GPE
Stock Clocks: eLite_GPE_Kernel-12_30_2014-stockclk
OC/UC: eLite_GPE_Kernel-12_30_2014
Elite L AOSP
Elite_m7_AOSP_Kernel-01_06_2015
GPE Source
AOSP Source
XDA:DevDB Information
Elite L Kernels, Kernel for the Verizon HTC One
Contributors
brymaster5000
Source Code: https://github.com/brymaster5000
Kernel Special Features: S2W, L2M,DT2W,OC,UC, Fast Charge, Custom Voltage, Performance Tweaks
Version Information
Status: Stable
Created 2014-11-18
Last Updated 2014-12-13
Questions & Answers
Q: How do I set or change the kernel settings?
A: Use an app like Trickster to control the kernel settings.
Q: Why do some developers use an install script to set the kernel features and others use a control app?
A: To each his own. I personally like the flexibility of a control app so I can change settings on the fly and monitor the cpu frequencies/temperature etc. in lieu of changing the script and rebooting each time.
Q: Will you add this feature?
A: Maybe if you provide me with a good reason and research backing up why it's good to add. I like to keep my kernels somewhat clean to maintain optimization on battery and performance without going overboard.
Okay might have to start from scratch. Tried simply to merge in latest changes that bring it up to cm12 and won't boot. So I'll change my tactic tomorrow and will have something soon. FYI - my cm11 version works, just borks data.
Sent from my One.
Looking forward to giving this a run !! I can test if you need someine
Thanks for giving this a shot. I'm looking forward most to fast charge, because although Santod's beta ROM is 99% greatness, it seems to cause the phone to charge glacially slow for some reason. I miss DT2W also but the slow charging is killing me.
Very excited to get this and santod's beta running. You guys are awesome!
Will you post links on how to install a kernel? That is one thing I've never done before... I don't think... >.>
Youngtusk said:
Very excited to get this and santod's beta running. You guys are awesome!
Will you post links on how to install a kernel? That is one thing I've never done before... I don't think... >.>
Click to expand...
Click to collapse
Assuming your device is rooted, probably the easiest way is with an app called Flashify in the Play Store.
Will work on sprint?
Cj719 said:
Will work on sprint?
Click to expand...
Click to collapse
2nd for Sprint kernel.
major_works said:
Thanks for giving this a shot. I'm looking forward most to fast charge, because although Santod's beta ROM is 99% greatness, it seems to cause the phone to charge glacially slow for some reason. I miss DT2W also but the slow charging is killing me.
Click to expand...
Click to collapse
DT2W is a MUST!!! Thank you for attempting the first kernel for Lollipop with these crucial features!!!!
Excited to see where this goes
OKAY - download links are live. Test it out, let me know what doesn't work. Seems wake gestures aren't working properly...
Youngtusk said:
Very excited to get this and santod's beta running. You guys are awesome!
Will you post links on how to install a kernel? That is one thing I've never done before... I don't think... >.>
Click to expand...
Click to collapse
These are set up to flash in recovery the same way you do a ROM.
Cj719 said:
Will work on sprint?
Click to expand...
Click to collapse
kansasboy001 said:
2nd for Sprint kernel.
Click to expand...
Click to collapse
I added a link to a sprint one...as I don't have the device it is up to you guys to test, and if its good, I will post there...or you can send them here.
brymaster5000 said:
OKAY - download links are live. Test it out, let me know what doesn't work. Seems wake gestures aren't working properly...
These are set up to flash in recovery the same way you do a ROM.
I added a link to a sprint one...as I don't have the device it is up to you guys to test, and if its good, I will post there...or you can send them here.
Click to expand...
Click to collapse
I will be more than happy to test!
Quick update...this seems better than the one I just posted. Links are redone.
Now that everything seems to be at least going okay...I will start by fixing the hiccups with the wake gestures and then add things back in. Camera seems messed up, but I had to revert a large commit by CM for camera....that caused bootloops...so I might have to hit @santod040 up for what he has in his build.
brymaster5000 said:
Quick update...this seems better than the one I just posted. Links are redone.
Now that everything seems to be at least going okay...I will start by fixing the hiccups with the wake gestures and then add things back in. Camera seems messed up, but I had to revert a large commit by CM for camera....that caused bootloops...so I might have to hit @santod040 up for what he has in his build.
Click to expand...
Click to collapse
Maybe get a hold of the maker of the AGK kernel in the One Android Development thread. I'm running his AOSP kernel right now without issue.
Bootloop on Sprint kernel
Just curious if there was progress on this!! If it has the same features as the aosp 4.4.4 kernal then I'm stoked
inexplicability said:
Just curious if there was progress on this!! If it has the same features as the aosp 4.4.4 kernal then I'm stoked
Click to expand...
Click to collapse
Life's a little busy for me at the moment and with santod having released his, I figured progress on this is not crucial. I'm not abandoning it, just lie is taking prescience right now.
Sent from my One.
Clean Build
Anybody want to try a clean build? I am starting from scratch and my testers are MIA...lol. Just an FYI - nothing added for features, just need to know a base point. Should I test this on my own...yes...but I really don't have the time to flash stuff lately. But working on a build in the background while the wife uses the computer seems to be working out for me lol.
brymaster5000 said:
Clean Build
Anybody want to try a clean build? I am starting from scratch and my testers are MIA...lol. Just an FYI - nothing added for features, just need to know a base point. Should I test this on my own...yes...but I really don't have the time to flash stuff lately. But working on a build in the background while the wife uses the computer seems to be working out for me lol.
Click to expand...
Click to collapse
I'll test my man
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Elite Lollipop Kernel, a custom kernel for the Verizon HTC One, built for Android 5.0.2 - Lollipop and GPE 5.1. This version is for Lollipop Sense and GPE.
Additional Features are as follows:
- CPU OC and UC 162-2106
- ROW, SIO, FIOPS io schedulers
- Smartmax, Optimax, and Ragingmolasses Governors
- Max Screen Off CPU Frequency
- Advanced TCP Congestion controls
- Fast Charge
- GPU OC/UC with steps of 128, 200, 320, 400, 450, and 487
- Simple GPU governor
- Faux Sound Control
- User Space Voltage control
- Screen Wake options: Sweep2Wake, DoubleTap2Wake, Logo2wake, pocket detection, and Logo2Menu
- Thermal control by crpalmer
- Neon drivers
- Linaro 4.9.4 - cortex a15 toolchain
- 02 Optimazations
- LZ4 Compression
Downloads
Elite L GPE 5.1 - untested but should work on Sense just fine
Stock Clocks: eLite_kernel-09_20_2015_stkclock
OC/UC: eLite_kernel-09_20_2015
Elite L Sense 5.0.2
Stock Clocks: eLite_kernel-03_11_2015-stockclk-NEW
OC/UC: eLite_kernel-03_11_2015-NEW
Source
XDA:DevDB Information
Elite Kernel, Kernel for the Verizon HTC One
Contributors
brymaster5000
Source Code: https://github.com/brymaster5000/m7-501/tree/eLite
Kernel Special Features: CPU & GPU OC/UC, wake gestures, thermal, voltage control
Version Information
Status: Stable
Created 2015-03-06
Last Updated 2015-09-21
Reserved
Thanks as always for the work and help Bry
thanks a lot bry !
will flash this tonight and report after playing with it for sometime
Nice! Works perfectly. Just what I was wanting to make my phone perfect.
Thanks guys. I cleaned this version up compared to the 443 version. I wanted a fresh start on this while maintaining the necessary goodies but not going overboard. Most of the additions to this version are under the hood.
Tried it and had problems.
1st boot up stuck at the HTC screen, I had to restart it, then it booted.
BT connected but had no voice, nor audio.
That's as far as I got before restoring.
It did work I just don't have the Free time at this moment to fiddle with the BT.
I have a concern y are u including gov like optimax in ur kernel when our board doesn't support thread migration?
which app would be best to control this kernel ?
i need to change wake gestures and disable logo2menu
thanks.
aaki_rocker said:
which app would be best to control this kernel ?
i need to change wake gestures and disable logo2menu
thanks.
Click to expand...
Click to collapse
trickster
aaki_rocker said:
which app would be best to control this kernel ?
i need to change wake gestures and disable logo2menu
thanks.
Click to expand...
Click to collapse
Or you could change the init.d file and reboot.
peteangi said:
trickster
Click to expand...
Click to collapse
i must admit its a pretty neat kernel.
phone doesn't heat up much.
the charging time is definitely lower than other kernels I've used so far.
can't comment on battery life now. will use it for a couple of days more and report later.
thank you for your awesome contribution to the m7 community bry.
the battery readings are unstable. 56% since the morning.
i have been playing parking simulator games, using whatsapp, hike and still the battery % wont change. rebooted the phone and the battery was like 47%. rebooted again and it went back to 55%.
Not sure if that's the kernel. I would imagine that the battery drivers would be in the ROM no?
aaki_rocker said:
the battery readings are unstable. 56% since the morning.
i have been playing parking simulator games, using whatsapp, hike and still the battery % wont change. rebooted the phone and the battery was like 47%. rebooted again and it went back to 55%.
Click to expand...
Click to collapse
It probably has to do with a battery mod. As there are a few to choose from in nusense, something might not have flashed correctly. I had similar issues on bonestock when I tried flashing my ecliptic battery mod. Because he had a mod in there too show better history stats, the battery mod would hang in percentages....so just my experience and it is probably something similar.
brymaster5000 said:
It probably has to do with a battery mod. As there are a few to choose from in nusense, something might not have flashed correctly. I had similar issues on bonestock when I tried flashing my ecliptic battery mod. Because he had a mod in there too show better history stats, the battery mod would hang in percentages....so just my experience and it is probably something similar.
Click to expand...
Click to collapse
I don't think that is the case since the same thing would be happening with the default kernel.
Been running g the stock clock for days now, before release even and my battery hasn't done that.
disconnecktie said:
I don't think that is the case since the same thing would be happening with the default kernel.
Click to expand...
Click to collapse
I was attributing it to having an abundant amount of options, he may have had a bad install. That is all.
brymaster5000 said:
I was attributing it to having an abundant amount of options, he may have had a bad install. That is all.
Click to expand...
Click to collapse
yep could be !
i just clean flashed the rom though !
just to test the kernel.
eriknors said:
I have a concern y are u including gov like optimax in ur kernel when our board doesn't support thread migration?
Click to expand...
Click to collapse
The snapdragon s4 processor has IMT - interlaced multi thread architecture.