Develop Bugs

TouchWiz vulnerability?

i guess by now every SGS3 owner on att has heard about the touchwiz exploit.
I did the test you can find here :http://www.androidcentral.com/ussd-test
and my SGS3 stock rooted, build number IMM76D. I747UCALH9 dialer showed up blank.
central android forums says my phone is not vulnerable.
what about yours?

Stock rooted H9, also came up blank.

Using BlackCream ROM, and it came up with my IMEI. Is there anyway to patch this exploit, without re-installing a ROM?

Stock h9 rom, dialer came up blank here.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Ariel 2.08 with stock Kernel option comes up with blank dialer. Hurray Ariel

Stock, root H9 blank

Stock no root latest firmware.....blank
Sent from my SAMSUNG-SGH-I747

Rooted LI2c came up blank
Sent from my SGH-I747M using xda app-developers app

Stock, no root, Came up blank.
Can't say the same for my friend with a verizon SGSIII.
TROLOLOL

Tried it using stock dialer, no imei popped up. Tried it using ExDialer, imei popped up

Yea.... people should read Gizmodo a little more often, too.
http://gizmodo.com/5946334/samsung-security-bug-can-wipe-out-your-galaxy-phone-updating
Samsung has been aware of it for a few months, and the latest firmware fixed it. So any ROM at least based off of that wouldn't have the vulnerability either.

elementaldragon said:
Yea.... people should read Gizmodo a little more often, too.
Click to expand...
Click to collapse
Gizmodo is lame , wake up.

elementaldragon said:
Yea.... people should read Gizmodo a little more often, too.
http://gizmodo.com/5946334/samsung-security-bug-can-wipe-out-your-galaxy-phone-updating
Samsung has been aware of it for a few months, and the latest firmware fixed it. So any ROM at least based off of that wouldn't have the vulnerability either.
Click to expand...
Click to collapse
used to be gizmodo now its called Applemodo

I think its crazy and i dont buy it at all for some reason
Sent from my SGH-I747 using xda premium

From what I recall reading this pertained to more the Eclair/Froyo builds.
Sent from my SGH-I747M using xda premium

Im on original stock, rooted and got the #06 whatever reply, so guess these phones are safe and this was blown out of proportion as usual. How convenient this came out at the sametime the iphone 5 was released ...

On Triune II and my stock dialer came up blank. All good here.

Am I safe?

I have an S3 that's flashed to MetroPCS.
Will flashing custom roms remove my carrier settings?

I'm just curious how "am I safe" related to your question haha. But flashing a custom rom made for sprint phones and service is very risky and not a good idea.
Sent from my SPH-L710 using xda premium
---------- Post added at 03:54 AM ---------- Previous post was at 03:53 AM ----------
*if you flashed the phone to metro already
Sent from my SPH-L710 using xda premium

Yes, those ROMs are known to destroy lives, kill cats, start fire storms, and all that.
In short, stay away if you want to stay alive
Sent from my GT-I9100 using Tapatalk 2

neither of the above users are correct.
It doesn't matter what carrier it is made for, you can use it with MetroPCS. you might want to remove the Sprint specific apks from /system/app, but other than that, it will continue to work with MetroPCS.
I am running Jelly Bomb 7.0 and my wife is running Freeza's LJ7 leak. we both have 3g speeds, internet, mms in/out, voicemail notifications, etc.
If you are missing any of the above, check out my guide on how to get it done on the S3.

Max_Pain said:
neither of the above users are correct.
It doesn't matter what carrier it is made for, you can use it with MetroPCS. you might want to remove the Sprint specific apks from /system/app, but other than that, it will continue to work with MetroPCS.
I am running Jelly Bomb 7.0 and my wife is running Freeza's LJ7 leak. we both have 3g speeds, internet, mms in/out, voicemail notifications, etc.
If you are missing any of the above, check out my guide on how to get it done on the S3.
Click to expand...
Click to collapse
Thanks for the informative reply. What about the Sprint JellyBean update?
Sent from my SprintroPCS Samsung GS3.

You said custom roms. If you get the Sprint OTA you will lose root.
Understand that the settings that make your phone connect to MetroPCS,
Send and receive text messages and get 3g access can not be affected or overwritten by flashing any kind of rom or by receiving an ota.
However, mms requires modification to the APN, which requires root access.
Sent from my Samsung Galaxy SIII on MetroPCS!

Max_Pain said:
You said custom roms. If you get the Sprint OTA you will lose root.
Understand that the settings that make your phone connect to MetroPCS,
Send and receive text messages and get 3g access can not be affected or overwritten by flashing any kind of rom or by receiving an ota.
However, mms requires modification to the APN, which requires root access.
Sent from my Samsung Galaxy SIII on MetroPCS!
Click to expand...
Click to collapse
BUUUUT I can root Jellybean once I get it.
The reason I asked is because I had an Evo 3D before this, and for some reason, when I would flash an AOSP ROM, my phone would lose its carrier settings and go back to Sprint. I think the phone had a modified or repaired ESN.

I can not believe how mean you guys are. Would you feel good if your Cat got killed just because of a careless ROM flash?
Sent from my GT-I9100 using Tapatalk 2

AtmosFEAR4701 said:
BUUUUT I can root Jellybean once I get it.
The reason I asked is because I had an Evo 3D before this, and for some reason, when I would flash an AOSP ROM, my phone would lose its carrier settings and go back to Sprint. I think the phone had a modified or repaired ESN.
Click to expand...
Click to collapse
well, I guess I spoke too quickly. I have only ever used phones with clean ESN. I don't know how "repaired" or "modified" ESNs work.
FromiOSToAndroid said:
I can not believe how mean you guys are. Would you feel good if your Cat got killed just because of a careless ROM flash?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I really am lost here.

Nevermind I took a shot at it and I am happily on CM10 right now. Also, I did the update through ODIN and that worked.
Also on a side note to the rest of you, Don't give me smart ass replies to a simple question. I don't need that. Thanks.

Darthstalker ROM -- All things not development related--

I figured I would start this thread so that we can move all the non-development talk out of the development section. I hope people will use it so that when something that pertains to development is talked about it will be easier to find. We can discuss what kernels gives best battery life, which ones work and which one break things. We can post about our favorite apps, widgets, wallpapers, or how the weather is outside. Maybe someone will get help on an issue they are having. We can discuss anything within the guidelines of XDA, lets just try to help keep Jovy's thread clean.
I'll start, has anyone had an issue when coming out of sleep the screen is dim and you have to go into brightness and tap it to make it work? I think maybe I set my clock frequency to low or maybe I should be using a different governor. Another issue that bugs me is when I have ripple effect set and use a black background for my lockscreen the borders of the screen look slightly grey. I have read posts about this and by turning off ripple effect the color is like it should be. I like the ripple effect and I like black backgrounds, does anyone know about a fix for this, or does anyone notice this issue on their phone.
Here's the link to the Darthstalker ROM if you read this post and want to check out the actual ROM: http://forum.xda-developers.com/showthread.php?t=2014442
I am not the developer of this ROM, all credit for this great ROM goes to jovy23 and those he's listed in his OP.
~ Todd
Sent from my AT100 using xda premium

Good idea for a thread about the greatest rom! Here is a quick mod for all those interested, here is the stock boot animation and sound that work great!
http://forum.xda-developers.com/showthread.php?t=1706856
Sent from my SGH-T999 using Tapatalk 2

Thank you for this :victory:

tp2215 said:
Good idea for a thread about the greatest rom! Here is a quick mod for all those interested, here is the stock boot animation and sound that work great!
http://forum.xda-developers.com/showthread.php?t=1706856
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
This is a good example of what this thread is for. Thanks for posting.
Sent from my AT100 using xda premium

So to move my question to this thread. If I nand will it flash back my original kernel. Trying to remove kt747 and go back to stock kernel that came with this Rom.
Sent from my SGH-T999 using xda app-developers app

JohnnyNyQuil said:
So to move my question to this thread. If I nand will it flash back my original kernel. Trying to remove kt747 and go back to stock kernel that came with this Rom.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Your nand restore should bring you back to whichever kernel was active during the backup
Sent from my SGH-T999 using xda premium

Awesome! Wasn't sure.
Sent from my SGH-T999 using xda app-developers app

edit28 said:
Your nand restore should bring you back to whichever kernel was active during the backup
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I flash quite a few kernels, always making a backup prior so I can always restore. When restoring I always wipe like I'm installing a new ROM. Just to make sure nothing gets left behind.
Sent from my AT100 using xda premium

tmjohnsonfse said:
I flash quite a few kernels, always making a backup prior so I can always restore. When restoring I always wipe like I'm installing a new ROM. Just to make sure nothing gets left behind.
Sent from my AT100 using xda premium
Click to expand...
Click to collapse
Same here! I find 99.9% of ROM-related issues for us flashaholics stem from not performing a full wipe prior to a flash. I've been fully stable on every DaRTHSTALKER update, with LOTS of varying kernel testing, by using this method. Full data + cache + Dalvik wipe then flash than another cache/dalvik wipe before the boot is always a good strategy!
Sent from my SGH-T999 using xda premium

I always make backups for any change I flash too but the last phone I rommed was my g1. The vibrant was too much of a pain and there wasn't any good roms with Wi-Fi calling. I know these things are a different beast so I just wanted to make sure. Btw doesn't nand do all of the wiping process for you?
Sent from my SGH-T999 using xda app-developers app

JohnnyNyQuil said:
I always make backups for any change I flash too but the last phone I rommed was my g1. The vibrant was too much of a pain and there wasn't any good roms with Wi-Fi calling. I know these things are a different beast so I just wanted to make sure. Btw doesn't nand do all of the wiping process for you?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I believe it does, but it only takes a few seconds to be absolutely sure it's done correctly. I'm a creature of habit.
Sent from my AT100 using xda premium

Much better. I guess I didn't even try the Rom tweaks on this one in the first place. Gonna see tomorrow how much better it will be. On another note, has anyone successfully connected to allshare play with another gs3? My girlfriend got hers (completely stock 4.1.1 w/no root) and everything else interacts except for that. Would like to group cast with her and I've followed the videos online to do it but our phones don't show up in each other's network, connected to WiFi of course.
Sent from my SGH-T999 using xda app-developers app

tmjohnsonfse said:
I figured I would start this thread...
Click to expand...
Click to collapse
Thank you for this thread, this is an excellent idea!
I've been a fan of this ROM since the very day the version 9 was uploaded. I got my SGS3 late December (this is my first android device), tried a few ROMs and stopped on this one. (BTW: a suggestion to put a link to the DARTHSTALKER S3 ROM thread http://forum.xda-developers.com/showthread.php?t=2014442 on OP so everyone new to this knows what it is all about).
This being my first post on the entire forum I was not allowed to ask questions on the original ROM's threads (and there are at least two I am following).
Now, if you don't mind a newbie question, here it is:
I am a T-mo subscriber using an unlocked AT&T phone. Currently I am on DARTHSTALKER v9 port for AT&T (here's the thread: http://forum.xda-developers.com/showthread.php?t=2087164 ). As the most of you I am eagerly awaiting version X1 of the DaRTHSTALKER, but my question is: can I just flash the T-mobile version or should I wait for when an AT&T PORT is available?
Thnks.

Pr0phess0r said:
Thank you for this thread, this is an excellent idea!
I've been a fan of this ROM since the very day the version 9 was uploaded. I got my SGS3 late December (this is my first android device), tried a few ROMs and stopped on this one. (BTW: a suggestion to put a link to the DARTHSTALKER S3 ROM thread http://forum.xda-developers.com/showthread.php?t=2014442 on OP so everyone new to this knows what it is all about).
This being my first post on the entire forum I was not allowed to ask questions on the original ROM's threads (and there are at least two I am following).
Now, if you don't mind a newbie question, here it is:
I am a T-mo subscriber using an unlocked AT&T phone. Currently I am on DARTHSTALKER v9 port for AT&T (here's the thread: http://forum.xda-developers.com/showthread.php?t=2087164 ). As the most of you I am eagerly awaiting version X1 of the DaRTHSTALKER, but my question is: can I just flash the T-mobile version or should I wait for when an AT&T PORT is available?
Thnks.
Click to expand...
Click to collapse
I would pm Jovy as he would know best, but maybe someone may be able to answer the question for you. I am new to phones also and the S3 is my first smart phone. I too have tried most of the roms, but keep coming back to this one. I do know that most at&t kernels are compatible, I would want to be 100% sure of ROM compatibility before flashing, might end up in a bad way. Thanks for the suggestion about seeing if Jovy would put the link in his OP.
Sent from my AT100 using xda premium

I had something happen last night that I've never had happen before and maybe sometime can tell me what it was. I was restoring back after messing with a few mods that didn't work and when my phone booted up in the lower left corner it said "Safe Mode". I went back into recovery and wiped cache and dalvik cache, fixed permissions, and then rebooted and safe mode was gone. What is safe mode?
Thanks,
Todd
Edit: Should have used Google first. Safe mode is similar to computer safe mode. It only loads base os to allow for removal of files. Still don't understand why it happened, but atleast I know it wasn't something bad.
Sent from my AT100 using xda premium

Pr0phess0r said:
Thank you for this thread, this is an excellent idea!
I've been a fan of this ROM since the very day the version 9 was uploaded. I got my SGS3 late December (this is my first android device), tried a few ROMs and stopped on this one. (BTW: a suggestion to put a link to the DARTHSTALKER S3 ROM thread http://forum.xda-developers.com/showthread.php?t=2014442 on OP so everyone new to this knows what it is all about).
This being my first post on the entire forum I was not allowed to ask questions on the original ROM's threads (and there are at least two I am following).
Now, if you don't mind a newbie question, here it is:
I am a T-mo subscriber using an unlocked AT&T phone. Currently I am on DARTHSTALKER v9 port for AT&T (here's the thread: http://forum.xda-developers.com/showthread.php?t=2087164 ). As the most of you I am eagerly awaiting version X1 of the DaRTHSTALKER, but my question is: can I just flash the T-mobile version or should I wait for when an AT&T PORT is available?
Thnks.
Click to expand...
Click to collapse
tmjohnsonfse said:
I would pm Jovy as he would know best, but maybe someone may be able to answer the question for you. I am new to phones also and the S3 is my first smart phone. I too have tried most of the roms, but keep coming back to this one. I do know that most at&t kernels are compatible, I would want to be 100% sure of ROM compatibility before flashing, might end up in a bad way. Thanks for the suggestion about seeing if Jovy would put the link in his OP.
Sent from my AT100 using xda premium
Click to expand...
Click to collapse
I WOULD NOT DO THAT! Although I cannot answer the question directly, every carrier has modified there own Galaxy S3. They are all completely different. I know that if you flash a Universal galaxy S3 rom onto a T-Mobile device, it will completely hard brick it due to a change in the partition structure. If you have an At&t device, I would still stick to the Galaxy s3 at&t roms even though T-mobile is your carrier.

tp2215 said:
I WOULD NOT DO THAT! Although I cannot answer the question directly, every carrier has modified there own Galaxy S3. They are all completely different. I know that if you flash a Universal galaxy S3 rom onto a T-Mobile device, it will completely hard brick it due to a change in the partition structure. If you have an At&t device, I would still stick to the Galaxy s3 at&t roms even though T-mobile is your carrier.
Click to expand...
Click to collapse
+1. Unlocking your phone only allows it access to a different carriers sim card. It does not change the base of the phone itself. I have a Tmobile SG3 that's unlocked for my travels but any ROM I flash must be a tmo based ROM. In your case stick with the ATT ROMs so you don't end up with a brick, and enjoy this great rom
My s3 is stalking your s3....

Does anyone have a flashable (zip) stock kernel?
I have looked and looked with no luck, I mean I can always just re flash the rom, but wanted to explore other alternatives first.
Thanks for creating this thread btw.
Sent from my SGH-T999 using xda premium

Hey guys been using this ROM for awile. I recently flashed a 4.2 ROM and know my GPS won't lock on I had made a back up before flashing ROM and reverted back to backup after I decided to switch back to this rom. Any suggestions on how to fix?
Sent from my SGH-T999 using Tapatalk 2

I have noticed a while ago when I receive text notification or miss calls, when i slide on them it takes about 10 second to open. I have reflashed this ROM several times n others just to see what's up but the problem only occurs with version x...anyone else experience this? just my phone?
Sent from my SGH-T999 using xda premium

Q: MB1 root??

Can I root this as I would older builds such as LBJ & MA6??
Sent from my SPH-L710 using xda app-developers app

Picking up a new gs3 today. Might be updated to this build so I'd also like to know the answer to this.
Thanks.

Yes root abilty has not changed, just the build. Use the zip from teamepic and you're too to go.
Sent from my SPH-L710 using Tapatalk 2

pathtologos said:
Picking up a new gs3 today. Might be updated to this build so I'd also like to know the answer to this.
Thanks.
Click to expand...
Click to collapse
I'm unsure overall. And don't worry there's no chance it will already be mb1 lol. If new out of box, it will at a minimum be at LJ7. Ma6 and mb1 have been released in the last week. The phones in box left the factory months ago and haven't been updated since maybe in a few months the new in box phones will have the mb1 update so just get ready as if your LJ7 or a previous version.
Sent from my SPH-L710 using xda app-developers app

ReapersDeath said:
I'm unsure overall. And don't worry there's no chance it will already be mb1 lol. If new out of box, it will at a minimum be at LJ7. Ma6 and mb1 have been released in the last week. The phones in box left the factory months ago and haven't been updated since maybe in a few months the new in box phones will have the mb1 update so just get ready as if your LJ7 or a previous version.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Actually I'm buying it off a guy on craigslist (pray for me...lol). Not sure if sprint has pushed out the ota for mb1. Do u know,by chance?

pathtologos said:
Picking up a new gs3 today. Might be updated to this build so I'd also like to know the answer to this.
Thanks.
Click to expand...
Click to collapse
Take it to a sprint store. If the store is a corporate owned they should be able to update it for you.
Sent from my SPH-L710 using xda app-developers app

jhill110 said:
Take it to a sprint store. If the store is a corporate owned they should be able to update it for you.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Don't necessarily want to upgrade...lol. Especially if root methods won't work (although I'm hearing its not a problem). Thanks for the response though.

Used to be rooting was a pain. Now you just watch video and it's a piece of RIBEYE STEAK smothered in mushrooms and onions.
Sent from my SPH-L710 using xda app-developers app

Update to mb1 before rooting otherwise you will have to root all over again.
Root will work on mb1.
I used the team epic root process mentioned above.
In my case I was rooted with ma6. Got the ota update with stock recovery. Then had to re-root.
Sent from my SPH-L710 using xda app-developers app

ZionZR2 said:
Update to mb1 before rooting otherwise you will have to root all over again.
Root will work on mb1.
I used the team epic root process mentioned above.
In my case I was rooted with ma6. Got the ota update with stock recovery. Then had to re-root.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Is mb1 that much better?

pathtologos said:
Is mb1 that much better?
Click to expand...
Click to collapse
I really do not know. I went to MA6 from whatever was previous on my phone(4.1.1). then I rooted then next morning OTA MB1 and rerooted all in less than 48 hours. So i have really no way of knowing what changes were in between MA6 and MB1. There were some minor changes I noticed after updating to MA6.
Google Settings appeared in the App drawer. I think there were some keyboard modifications where there is a separate heptic feedback switch to turn on or off.
Other than that I think everything else was behind the scenes type stuff and bug fixes.

before buying on craigslist, request the ESN number and call up sprint to see if its clean. First thing you should do

ReapersDeath said:
before buying on craigslist, request the ESN number and call up sprint to see if its clean. First thing you should do
Click to expand...
Click to collapse
Thanks guys. I already picked it up and its great. Everything seems to be working and I can't find a single scratch on it. He gave me a nice case too. Anywho, now that I have it I see I'm on LJ7. How are you guys updating the baseband? I updated PRL, Profile, and I checked for a firmware update but there was none. I am on stock recovery (for now...lol).

pathtologos said:
Thanks guys. I already picked it up and its great. Everything seems to be working and I can't find a single scratch on it. He gave me a nice case too. Anywho, now that I have it I see I'm on LJ7. How are you guys updating the baseband? I updated PRL, Profile, and I checked for a firmware update but there was none. I am on stock recovery (for now...lol).
Click to expand...
Click to collapse
Ok, Settings /manage apps /all.
Scroll down to Google services framework. Force stop. Clear data.
Back out to settings. System update, update samsung software. Try a couple of times if necessary.
Sent from my SPH-L710 VIA Subspace

Just wanna make sure. Regardless of which baseband I'm on, any rom should work, right? Sprint roms of course. It's just that on the Note 2, some baseband versions wouldn't play nice with certain roms (cause errors, etc.). I'm seeing some roms in dev section saying, "based on ma5" or "based on ljc." Does that mean I HAVE to be on that baseband to flash that rom? Sorry for all the noobish questions but when you bounce around devices, you get confused

pathtologos said:
Just wanna make sure. Regardless of which baseband I'm on, any rom should work, right? Sprint roms of course. It's just that on the Note 2, some baseband versions wouldn't play nice with certain roms (cause errors, etc.). I'm seeing some roms in dev section saying, "based on ma5" or "based on ljc." Does that mean I HAVE to be on that baseband to flash that rom? Sorry for all the noobish questions but when you bounce around devices, you get confused
Click to expand...
Click to collapse
Samsung devices act the same. I suggest you read a whole lot more since your question reveals that you really have no idea what you are doing and a brick is in the future... I realize you're excited to play around, but the results of fapping with tissue paper and fapping with sand paper stem from more than just a simple word.

The Root said:
Samsung devices act the same. I suggest you read a whole lot more since your question reveals that you really have no idea what you are doing and a brick is in the future... I realize you're excited to play around, but the results of fapping with tissue paper and fapping with sand paper stem from more than just a simple word.
Click to expand...
Click to collapse
*snicker* That was funny stuff...

root
Where is the root method from team epic? Can someone post the link.

capadon said:
Where is the root method from team epic? Can someone post the link.
Click to expand...
Click to collapse
Search. Team epic root from recovery.

The Root said:
Samsung devices act the same. I suggest you read a whole lot more since your question reveals that you really have no idea what you are doing and a brick is in the future... I realize you're excited to play around, but the results of fapping with tissue paper and fapping with sand paper stem from more than just a simple word.
Click to expand...
Click to collapse
A brick is NOT in my future. Look I respect the fact that you've been around a while and have helped many out but just because I ask a noobish question doesn't mean I'm a noob. I've owned an OG Evo, a EVO 3d, the EVO 4g LTE, the galaxy nexus, the sg2, the gnote 2, and sg3 and many more I probably can't remember right now. I have been a "flashoholic" for quite a while, flashing roms, radios, mods, etc. I've even helped devs build flashable zips to install mods. I HAVE NEVER BRICKED A DEVICE. Maybe my question wasn't clear but it doesn't matter cuz I already updated my baseband to mb 1 and I've flashed several roms, all without incident. It seems to me that all roms work regardless of what baseband your on (as long as they are for the right device). I respect you and others on this forum and I just didn't appreciate the tone with which this came across.

[ROM][STOCK][CWM][ROOTED][DEODEXED]Galaxy S III(SPH-L710)(Boost) MD7

This is a stock MD7 for the Boost Variant of the Samsung Galaxy S III, with SuperSU andBusybox installed. Apks are also zipaligned. This will not install a modem and should not wipe your device. This was built from the Samsung Official MD7 build.
Thanks to Smith058 for the find, and for letting me use it to cook with.Link to his OPhttp://androidforums.com/boost-mobile-galaxy-s3-all-things-root/753772-odin-backup-sph-l710_md7-stock.html
Thanks also to Google and XDA, for obvious reasons
Kennyglass123 - For posting guidance and all the awesome moderating he does around town
Stryke_the_Orc - For believing in me, for being a great friend and mentor, and always pushing me to do more
Garwynn - For teaching me something new almost daily, and for helping me bring more Boost support to this phone
If I have forgotten someone, please, please, let me know. I am all for giving credit where it is due.
Disclaimer: I am not responsible for whatever you do with your phone. Please flash at your own risk
Download Link:
Stock Rooted
http://www.androidfilehost.com/?fid=23159073880935958
Stock Rooted Deodexed
http://www.androidfilehost.com/?fid=23212708291678188
Flashing Instructions:
This will NOT flash a modem. If you are coming from stock MD7, you will keep MD7. Same goes for whatever baseband you have right now!
1. Download zip to your sdcard
2. Reboot into CWM, TWRP, or other compatible recovery(I used CWM 6.0.3.1 Touch)
3. Wipe Data, Cache, Dalvik
4. Flash zip
5. Reboot
6. Profit
Issues:
I do not claim to be the expert on anything, especially development issues. If you notice issues, please let me know. And if you have a solution to one of the issues I've found, please, by all means, post it and you'll get the credit. Enjoy
Note: It seems when rebuilding this to fix the issues above, I've lost the "rising orange Bs" boot animation. There's still boot-up sound, and the blue Samsung animation, but no Boost-specific. If you want it, you can get it from the previous build If I get time, I'll add it back in manually, but frankly, I like not having it there, it seems to boot a little faster
XDA:DevDB Information
Galaxy SIII(Boost) Stock ROMS, a ROM for the Sprint Samsung Galaxy S III
Contributors
jdsingle76
ROM OS Version: 4.1.x Jelly Bean
Based On: Official Kies
Version Information
Status: Stable
Created 2013-10-11
Last Updated 2013-11-17

Reserved for OP

NIce! Thanks for getting some straight up Boost files posted over here. I hope this is just the beginning.

wetbiker7 said:
NIce! Thanks for getting some straight up Boost files posted over here. I hope this is just the beginning.
Click to expand...
Click to collapse
Definitely just the beginning. More to come my friend
Sent from my SPH-L710 using xda premium

OP updated :thumbup:
Sent from my SPH-L710 using xda premium

A little confused.
Is this for Boost or Sprint? Will Sprint users see Boost logos and such? Or is this for people who are trying to use a Boost phone on Sprint service or vice versa?

Trident said:
A little confused.
Is this for Boost or Sprint? Will Sprint users see Boost logos and such? Or is this for people who are trying to use a Boost phone on Sprint service or vice versa?
Click to expand...
Click to collapse
It's for the Boost Mobile Galaxy s3. Boost has their own variant of the s3 like other carriers now.
Sent from my SPH-L710 using xda app-developers app

Trident said:
A little confused.
Is this for Boost or Sprint? Will Sprint users see Boost logos and such? Or is this for people who are trying to use a Boost phone on Sprint service or vice versa?
Click to expand...
Click to collapse
Notorious is correct. It's for the Boost variant of the S3. And to answer your second question, yes, it will flash Boost logo, mmsc url, etc.
Sent from my SPH-L710 using xda premium

Notorious said:
It's for the Boost Mobile Galaxy s3. Boost has their own variant of the s3 like other carriers now.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Glad I asked.
I'd guess that it wouldn't work well on my Sprint phone.

Trident said:
Glad I asked.
I'd guess that it wouldn't work well on my Sprint phone.
Click to expand...
Click to collapse
Actually, it'll work just fine. It'll just have Boost signature and mmsc url. Just like Boost and VM users have to change mmsc url, you would have to as well, I think. I say that, because if you check mmsc urlv on this rom, it actually reads "not set." I would be interested to see if mms would send and receive on other carriers with it saying "not set."
Sent from my SPH-L710 using Tapatalk now Free

Quick ? JD, does my Sprint S3 will have to be on the same MD7(since it was base on that one) or can it be on a different one...i.e newer/older version.

Trident said:
Glad I asked.
I'd guess that it wouldn't work well on my Sprint phone.
Click to expand...
Click to collapse
yes it work a few files need some Modification .... Modify the boost rom MG2 working on Sprint GS3

SilverTigre2010 said:
Quick ? JD, does my Sprint S3 will have to be on the same MD7(since it was base on that one) or can it be on a different one...i.e newer/older version.
Click to expand...
Click to collapse
I'm not sure I understand your question. If you're referring to your modem, then no, it doesn't have to be MD7. This is a Boost build, so you may have to change your mmsc url to get mms
Sent from my SPH-L710 using XDA Premium 4 mobile app

jdsingle76 said:
This will not install a modem and should not wipe your device.
Click to expand...
Click to collapse
So I will not lose any apps or anything if of course I don't do a total wipe I mean?
I did a nandroid just encase but wondered if it would just do the "android is updating" after installing thus all apps would be untouched.

I flashed it once I had some time it kept nagging about wanting to upgrade and was very laggy and slow compared to blazer I was running not ready to be a daily for me at least not till I have some time to remove all the bloat.

Carfanatic said:
I flashed it once I had some time it kept nagging about wanting to upgrade and was very laggy and slow compared to blazer I was running not ready to be a daily for me at least not till I have some time to remove all the bloat.
Click to expand...
Click to collapse
Hmmm, that's the first I've heard of that. This rom is completely stock, but yes, not debloated. I just installed es file explorer and deleted all the crap it comes with. And for the other poster, this will not wipe everything if you do a dirty flash. And I'm using it as my dd with zero issues.
Sent from my SPH-L710 using XDA Premium 4 mobile app

jdsingle76 said:
I'm not sure I understand your question...
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You got it, thanks. Working great, flashed 3 already.

SilverTigre2010 said:
You got it, thanks. Working great, flashed 3 already.
Click to expand...
Click to collapse
Glad to hear it. I have the MG2 tar as well. Anyone interested in a deodex/debloat of that? And silver, how's the build working for you?
Sent from my SPH-L710 using XDA Premium 4 mobile app

Status
Over 300 downloads, thanks everyone! I haven't heard any feedback, so I'm assuming it is working ok. Let me know!

I'm wondering is this ROM a daily driver or are there any kinks that anyone can report on.
Sent from my SPH-L710 using XDA Premium 4 mobile app