Hi all,
Anyone have the problem when flashing the CM11 rom?
I get the latest rom which is "20140106" and when the in CWM, i would get an error (Status 7).
I view the log function and it print out "failed to open /sys/class/android_usb/android0/state: No such file or directory"
Is that mean the zip file i download has a missing class file?
Need some advice from expert.
Thanks and Regards,
Sam
sampeng6623 said:
Hi all,
Anyone have the problem when flashing the CM11 rom?
I get the latest rom which is "20140106" and when the in CWM, i would get an error (Status 7).
I view the log function and it print out "failed to open /sys/class/android_usb/android0/state: No such file or directory"
Is that mean the zip file i download has a missing class file?
Need some advice from expert.
Thanks and Regards,
Sam
Click to expand...
Click to collapse
Which CWM are you using?
Sent from my GT-I8150 using Tapatalk
FelixMG said:
Which CWM are you using?
Sent from my GT-I8150 using Tapatalk
Click to expand...
Click to collapse
I am using CWM- v5.5.0.4
Any idea?
Thanks in advance!
sampeng6623 said:
I am using CWM- v5.5.0.4
Any idea?
Thanks in advance!
Click to expand...
Click to collapse
You should use a 6.0.4.5 recovery to flash CM11.
Sent from my GT-I8150 using Tapatalk
FelixMG said:
You should use a 6.0.4.5 recovery to flash CM11.
Sent from my GT-I8150 using Tapatalk
Click to expand...
Click to collapse
First of all, thanks for the reply and help.
I see.. So that's the problem. I have search over the forum on how to change recovery but don't understand how to do it.
I have download Odin 4.43 and downloaded (recovery-clockwork-6.0.4.5-ancora.tar & Ancora.ops ) from the thread of the rom by acro but how to do next?
According to the tutorial, Long press Volume Up + Menu + Power and release Power to get into the Download Mode but when I do so, it booted to my current recovery which is CWM 5.5.0.4.
Is there any link or tutorial that can guide me to could help me success change the CWM of my galaxy w?
Need more advice on this issue and hope to be able to get the KK rom..
Thanks in advance!
I have successfully installed the KK rom and changed the way CWM
Finally figure it out
Thanks
Glad you have found it. The same happen with me yesterday but now it's OK. Now i can taste KK 4.2.2 in my SGW
Related
Any one knows where to get stock SystemUI.apk.. Because, i have changed the softkeys, and my OTA wont install now.. I didnt back up with nandroid.. So i need stock 4.0.4 SystemUI.apk..
Any one can help me ?
Thanks in advance
Btw i have stock System.img file.. Does that helps in any way ?
Sorry for doublepost and thanks in advance again.
Laynee1 said:
Btw i have stock System.img file.. Does that helps in any way ?
Sorry for doublepost and thanks in advance again.
Click to expand...
Click to collapse
Read the update link in my signature. It tells you how to extract it from the system.img
Sent from my Galaxy Nexus using Tapatalk 2
Thanks for your respond mate
But i cant find out why is my ota install failing .. I copied systemui.apk.. And it failed again.. I dont know what else i have changed that can affect ota install.. Can you help me maybe ? Or should i transfer all of extracted files from system.img?
Thanks mate..
Laynee1 said:
Thanks for your respond mate
But i cant find out why is my ota install failing .. I copied systemui.apk.. And it failed again.. I dont know what else i have changed that can affect ota install.. Can you help me maybe ? Or should i transfer all of extracted files from system.img?
Thanks mate..
Click to expand...
Click to collapse
I would need to know what the error is and any details of where it fails.
Sent from my Galaxy Nexus using Tapatalk 2
But how to know that ? It just loads the android robot with multiangle thing inside his belly and all of the sudden, yellow exclamation mark appears.. Where to get that error log or smt like that ?
Laynee1 said:
But how to know that ? It just loads the android robot with multiangle thing inside his belly and all of the sudden, yellow exclamation mark appears.. Where to get that error log or smt like that ?
Click to expand...
Click to collapse
If you are seeing that then you have the wrong recovery installed. Either flash the IMM76D recovery, or flash CWM. Follow the instructions in the update link in my signature.
Sent from my Galaxy Nexus using Tapatalk 2
Are you aware that im trying to flash ota ? Will flash of IMM76D recovery wipe my device ?
Laynee1 said:
Are you aware that im trying to flash ota ? Will flash of IMM76D recovery wipe my device ?
Click to expand...
Click to collapse
Do not flash the IMM76D rom. Flash the recovery from the IMM76D version. Look at the update link in my signature, not the flash link.
Sent from my Galaxy Nexus using Tapatalk 2
efrant said:
Do not flash the IMM76D rom. Flash the recovery from the IMM76D version. Look at the update link in my signature, not the flash link.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
It helped ! I did it I have IMM76I now.. THANKS DUDE !
Congrats dude
Sent from my Galaxy Nexus using the XDA mobile application powered by Tapatalk
really need for help people ,my phone note2 and when i get rom in my phone to install it by cwm suddenly stop completely working so I have to rest it by power button.................
ALI-2013 said:
really need for help people ,my phone note2 and when i get rom in my phone to install it by cwm suddenly stop completely working so I have to rest it by power button.................
Click to expand...
Click to collapse
have u tried download mode and use odin to flash stock rom? then u can root again and problem should be gone...
diegomtoscano said:
have u tried download mode and use odin to flash stock rom? then u can root again and problem should be gone...
Click to expand...
Click to collapse
I know odin is better than cmw but some rom's like omega it coms on zip only what can i do??
Try to install the latest CWM.
Sent from my GT-N7100 using xda app-developers app
ALI-2013 said:
I know odin is better than cmw but some rom's like omega it coms on zip only what can i do??
Click to expand...
Click to collapse
hi ALI would suggest you to flash TWRP recovery and using this you can flash the zip files easily.
bayones said:
Try to install the latest CWM.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I will try it,but what is the last version for CMW??
ALI-2013 said:
I will try it,but what is the last version for CMW??
Click to expand...
Click to collapse
v6.0.3.0 or 6.0.1.5 for Chenglu's version
aukhan said:
hi ALI would suggest you to flash TWRP recovery and using this you can flash the zip files easily.
Click to expand...
Click to collapse
dude, i dont know what the TWRP is,so i will cheek it in Google and hopping working..thanks
Dear all,
I think, I softbricked my international e975 after installing psx rom. Now I have only TWRP, but it is not recovering my cwm backup, also, my phone is recognised as nexus4...I have only cwm back on my phone and the psx rom.zip file on my phone....I'm able to boot into twrp recovery. Can anyone please help me on how to adb push any rom zip file for installing? also, I'm downloading the .kdz file for my e975 indian version... any help please!!!!!!!
cooljay5 said:
Dear all,
I think, I softbricked my international e975 after installing psx rom. Now I have only TWRP, but it is not recovering my cwm backup, also, my phone is recognised as nexus4...I have only cwm back on my phone and the psx rom.zip file on my phone....I'm able to boot into twrp recovery. Can anyone please help me on how to adb push any rom zip file for installing? also, I'm downloading the .kdz file for my e975 indian version... any help please!!!!!!!
Click to expand...
Click to collapse
Use "adb push" to push cwm.zip (link on development forum) and then flash it
I tried it.... but adb command shows as device offline.... any other method will work???
Sent from my Dream_D1 using xda app-developers app
cooljay5 said:
I tried it.... but adb command shows as device offline.... any other method will work???
Sent from my Dream_D1 using xda app-developers app
Click to expand...
Click to collapse
I think there no is another method.
Maybe flash KDZ back, root, unlock bootloader, install CWM and restore backup.
ok. thank u.... but when im connected in recovery mode(twrp) my device is shown as nexus4, so will i be able to flash kdz still???
Sent from my Dream_D1 using xda app-developers app
cooljay5 said:
I tried it.... but adb command shows as device offline.... any other method will work???
Sent from my Dream_D1 using xda app-developers app
Click to expand...
Click to collapse
fix the driver is that so hard?
use latest ver of adb.
yes you can kdz just read the post i have already did here.
cooljay5 said:
ok. thank u.... but when im connected in recovery mode(twrp) my device is shown as nexus4, so will i be able to flash kdz still???
Sent from my Dream_D1 using xda app-developers app
Click to expand...
Click to collapse
Yes. Is just that for KK we need the lastets TWRP, which is not for Optimus G and we use the Nexus 4 TWRP. Or at least i think so. You can flash kdz.
nch26 said:
Yes. Is just that for KK we need the lastets TWRP, which is not for Optimus G and we use the Nexus 4 TWRP. Or at least i think so. You can flash kdz.
Click to expand...
Click to collapse
nope it was before the cm11, use the official cwm (posted in general for easy flash) and its all fine.
ok.. I would like to try to kdz method, but the link, given in OP is given an "uncatchable exception" error, both in firefox and chrome. Can anyone pls give me a working link for e975 indian version please.. this would be very helpfull...
cooljay5 said:
ok.. I would like to try to kdz method, but the link, given in OP is given an "uncatchable exception" error, both in firefox and chrome. Can anyone pls give me a working link for e975 indian version please.. this would be very helpfull...
Click to expand...
Click to collapse
http://lg-phone-firmware.com/index.php?id_mod=20
root than use the freegee i have posted and cwm update that i have posted and you are all set to try cm11
Thank you atfish, but when i clik on this link, all i get is a tny screen with some ads.. do i have to wait for the link to be loaded???
cooljay5 said:
Thank you atfish, but when i clik on this link, all i get is a tny screen with some ads.. do i have to wait for the link to be loaded???
Click to expand...
Click to collapse
Check your browser settings... This link goes to a long list of KDZs for LGOG.
sorry for asking too many questions.. can i get a full working link??
Sent from my Dream_D1 using xda app-developers app
cooljay5 said:
Thank you atfish, but when i clik on this link, all i get is a tny screen with some ads.. do i have to wait for the link to be loaded???
Click to expand...
Click to collapse
Hope you don't want me to come to your place and flash it for you.?
You have to press skip add top right
Sent from my Nexus 7 using Tapatalk
atfish mate,
Sorry for the trouble and noobish questions... Thank you verymuch to all of you, who helped me.... I have downloaded the kdz.. I will try to flash this and will post the results...
Thank you once again.....
What? U should have replaced ur recovery with a cwm to restore ur cwm backup.. Very easy in fastboot mode via adb.. Why go all in this trouble
Sent from my Optimus G using Tapatalk
---------- Post added at 10:09 PM ---------- Previous post was at 10:07 PM ----------
Also i use cwm philz edition for installibg KK ROMs.. U dont have to use twrp, u just have to delete some assert lines in the script if u use cwm
Sent from my Optimus G using Tapatalk
davevinci said:
u just have to delete some assert lines in the script if u use cwm
Sent from my Optimus G using Tapatalk
Click to expand...
Click to collapse
Not with CM11 and official recovery that I have posted.
Sent from my GT-P3100 using Tapatalk
Thank you atfish, davevinci and all other helpfull members, who guided me through this entire nightmare.., after 4 to 5 hours of googling, i did an adb sideload push savvyrom v3 to my phone, now everything is up and running... Thank you so much...
Just one quick question: I have my old freegee backup untouched in my internal memory. Now, to install the cwm recovery, do I have to use the old version of freegee apk again or just flashing the cwm zip through twrp will work??? Please advice and thanks a lot once again...
cooljay5 said:
Thank you atfish, davevinci and all other helpfull members, who guided me through this entire nightmare.., after 4 to 5 hours of googling, i did an adb sideload push savvyrom v3 to my phone, now everything is up and running... Thank you so much...
Just one quick question: I have my old freegee backup untouched in my internal memory. Now, to install the cwm recovery, do I have to use the old version of freegee apk again or just flashing the cwm zip through twrp will work??? Please advice and thanks a lot once again...
Click to expand...
Click to collapse
The freegee backup is not nessesary for anything. If your phone is running stock firmware, i recommend root it using framaroot, and unlock bootloader with freegee. This will install a recovery.
If you already have TWRP, delete script lines of CWM recovery and install it. If you dont know how to do it tell me.
cooljay5 said:
Just one quick question: I have my old freegee backup untouched in my internal memory. Now, to install the cwm recovery, do I have to use the old version of freegee apk again or just flashing the cwm zip through twrp will work??? Please advice and thanks a lot once again...
Click to expand...
Click to collapse
Freegee backup is your efs and boot files for later use if required. Save them in dropbox or something they are very handy in bad times.
If you are already unlocked with freegee than you have a custom recovery just boot into recovery and update the recovery using zip. Like the cwm one I have posted.
Yes if you are not unlocked, use the old freegee.apk
Sent from my LG-E975 using Tapatalk
Can't update to CM11 coming from CM10.2.
It says something like "this is for gt N5100, kona-3g?(not sure), N5100, This is kona-wifi(not sure again)"
but I'm sure my phone is N5100
I had this problem to... Flash a recovery that is for N5100 only like twrp or you can try to remove the first 4 lines in the updater scrip in the meta-inf\google\android but I'm not to sure about the folders though, open the updater script using notepad
Sent from my GT-N5100 using xda app-developers app
superng888 said:
I had this problem to... Flash a recovery that is for N5100 only like twrp or you can try to remove the first 4 lines in the updater scrip in the meta-inf\google\android but I'm not to sure about the folders though, open the updater script using notepad
Sent from my GT-N5100 using xda app-developers app
Click to expand...
Click to collapse
I already tried removing the assert line. It still failed. I'll try the Twrp. Thank you very much.
superng888 said:
I had this problem to... Flash a recovery that is for N5100 only like twrp or you can try to remove the first 4 lines in the updater scrip in the meta-inf\google\android but I'm not to sure about the folders though, open the updater script using notepad
Sent from my GT-N5100 using xda app-developers app
Click to expand...
Click to collapse
Tried twrp and deleting assert line in updater script. And it didn't work.
Hwoarang04 said:
Tried twrp and deleting assert line in updater script. And it didn't work.
Click to expand...
Click to collapse
May I know what error are you getting and which recovery you are using now?
superng888 said:
May I know what error are you getting and which recovery you are using now?
Click to expand...
Click to collapse
Problem already solved. I used philz touch. Thanks anyway. :highfive:
EDIT:
Okay that was fixed with using the latest PhilZ advanced CWM ver 6
hi there
i have exactly the same problem
im using PhilZ CWM and tried to flash the OMNIROM for GT-N5100
My Galaxy is all new and this is my first time to flash an android device
flashing the root pack and the PhilZ CWM worked like a charm, but if i try to flash the ROM for my GT-5100 it rants about "this for for kona-3g, this is device kona-wifi"
I triple-checked the build-info in the device settings, and it says everywhere "GT-N5100" - even at bootup
The ROM im trying to use is named like :
omniß4.4.20131224ßn5100-homemade.zip
im using Philz Touch 5 CWM 6 version CivZ 1.1
error is :
THis package is for "GT-N5100,kona3g..." device this is a "konawifi" (status 7)
Any ideas ??
same problem
Hwoarang04 said:
Problem already solved. I used philz touch. Thanks anyway. :highfive:
Click to expand...
Click to collapse
I have the same problem can you tell us how you fix this?? TKS
UP
wyassuda said:
I have the same problem can you tell us how you fix this?? TKS
Click to expand...
Click to collapse
Same here, it is not really helpfull to just say "Okay, problem solved" without giving a detailed explanation. Could you give us some feedback please ?
---------- Post added at 11:27 PM ---------- Previous post was at 11:16 PM ----------
wyassuda said:
I have the same problem can you tell us how you fix this?? TKS
Click to expand...
Click to collapse
I finally got the last zip of PhilZ Touch recovery, extracted it to get the recovery.img file and launched the following command: sudo heimdall flash --RECOVERY recovery.img
Because I am undr Mac osX and do not have Odin, so I use heimdall instead. Hope it will help
Back Online
I had the same issue too. I am back with CM11 nightly with some messing around.
1. Used Oden3 v3.07 and installed CivZ-Touch-6.0.4.4-Odin-5110_5100-REV1.1.tar
2. From recovery I installed philz_touch_6.41.6-n5110.
3. Rebooted, wiped, and installed my CM nightly from the main CM site (& gapps)
I used info and downloaded from Droid Views website. (cant post links yet)
Hope this helps!
oppossuminabag said:
I had the same issue too. I am back with CM11 nightly with some messing around.
1. Used Oden3 v3.07 and installed CivZ-Touch-6.0.4.4-Odin-5110_5100-REV1.1.tar
2. From recovery I installed philz_touch_6.41.6-n5110.
3. Rebooted, wiped, and installed my CM nightly from the main CM site (& gapps)
I used info and downloaded from Droid Views website. (cant post links yet)
Hope this helps!
Click to expand...
Click to collapse
Hi,
I tried the above and still get the Status 7 error. Have even tried a new version of 6.48.4-n5110 and no avail. I'm on the verge of throwing away this phablet into the dustbin.
First of all I am a noob and dont know much.
My tab is rooted and has cwm
I wiped the data and factory reset
Then I cleaned the rom to add a custom rom
while trying to install zip. It said
expects 5 args, got 4
Installation aborted.
Now my tab only opens and shows the logo Samsung Galaxy Tab 3
And freezes. Please help im really a noob and i dont have a backup.
is there a way i can still connect my tab to pc even though its only in download mode or recovery?
I need to access my files. Pls help
And i need to fix my tablet asap.
Hoping for any help. thanks
palagpalags said:
First of all I am a noob and dont know much.
My tab is rooted and has cwm
I wiped the data and factory reset
Then I cleaned the rom to add a custom rom
while trying to install zip. It said
expects 5 args, got 4
Installation aborted.
Now my tab only opens and shows the logo Samsung Galaxy Tab 3
And freezes. Please help im really a noob and i dont have a backup.
is there a way i can still connect my tab to pc even though its only in download mode or recovery?
I need to access my files. Pls help
And i need to fix my tablet asap.
Hoping for any help. thanks
Click to expand...
Click to collapse
The rom you are trying to flash must have an old update binary/script.
Download CWM 6.0.4.5 and flash it, then you can install the rom.
Sent from my SCH-I605
gr8nole said:
The rom you are trying to flash must have an old update binary/script.
Download CWM 6.0.4.5 and flash it, then you can install the rom.
Sent from my SCH-I605
Click to expand...
Click to collapse
I can't seem to find a 6.0.4.5 for Samsung Galaxy Tab 3 7.0 , what should I use ?
palagpalags said:
I can't seem to find a 6.0.4.5 for Samsung Galaxy Tab 3 7.0 , what should I use ?
Click to expand...
Click to collapse
Same link as 6.0.4.7
Sent from my SCH-I605
Try to flash stock rom, download it from sammobile.com
If it won't works then try to find pre rooted rom for it
I rooted mine with pre rooted file, it's about 1.3gb but I think it's last option for you
And can you give me link to cwm recovery for sm-t211?
Sent from my SM-T211 using xda app-developers app
gr8nole said:
Same link as 6.0.4.7
Sent from my SCH-I605
Click to expand...
Click to collapse
I am already using 6.0.4.7. But it still didn't work
palagpalags said:
I am already using 6.0.4.7. But it still didn't work
Click to expand...
Click to collapse
That's why I said to use 6.0.4.5. It is available at the same link.
Sent from my SCH-I605
gr8nole said:
That's why I said to use 6.0.4.5. It is available at the same link.
Sent from my SCH-I605
Click to expand...
Click to collapse
I can't seem to find the link. Can you please tell me where? I would appreciate it. Thanks
palagpalags said:
I can't seem to find the link. Can you please tell me where? I would appreciate it. Thanks
Click to expand...
Click to collapse
Perhaps, you could try this:
www .androidfilehost. com / ?fid = 23329332407567959
just remove spaces
but personally i'd recommend Philz Touch Recovery for Tab 3 (there's unofficial mod)