Develop Bugs

[Q] Return to Stock Rom 4.3 After CyanogenMod

im in a bit of a pickle here.
so i had android 4.3 stock rom but then switched to cyanogemod 10.2.. today i decided i wanted to go back to stock rom so i tried using odin 3.07 and flashing I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 (i cant find 4.3 firmware anywhere). i go into download mode, put that file in PDA, and odin tells me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone is says SV REV Check Fail : Fused 2 > Binary 0
i was trying to find stuff out online and they said something about a bootloader and i have no clue what that means. also, cyanogenmod is no longer even going to the home screen so my phone is not functioning at all. and since it isnt loading, my computer isnt detecting a device so i cant add any files to my phone.
can someone please help me? using english please, not computer hacker language. im not that advanced in this kind of stuff.

camerondobbs said:
im in a bit of a pickle here.
so i had android 4.3 stock rom but then switched to cyanogemod 10.2.. today i decided i wanted to go back to stock rom so i tried using odin 3.07 and flashing I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 (i cant find 4.3 firmware anywhere). i go into download mode, put that file in PDA, and odin tells me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone is says SV REV Check Fail : Fused 2 > Binary 0
i was trying to find stuff out online and they said something about a bootloader and i have no clue what that means. also, cyanogenmod is no longer even going to the home screen so my phone is not functioning at all. and since it isnt loading, my computer isnt detecting a device so i cant add any files to my phone.
can someone please help me? using english please, not computer hacker language. im not that advanced in this kind of stuff.
Click to expand...
Click to collapse
Unfortunately my friend, Odin will not work to return back to stock. By chance did you make a nandroid backup before you switched from 4.3 to CyanogenMod? If not I'd suggest finding a TW based rom from one of the devs on here under the Android Development thread and flash it manually via CWM or TWRP. I'm looking myself for a 4.3 TW Odin tar but nothing has surfaced to my knowledge. You're trying to flash a 4.0 rom in Odin it looks like which won't work since 4.3 updates the baseband and bootloader which will cause Odin to fail every time you try flashing a rom that isn't 4.3

camerondobbs said:
im in a bit of a pickle here.
so i had android 4.3 stock rom but then switched to cyanogemod 10.2.. today i decided i wanted to go back to stock rom so i tried using odin 3.07 and flashing I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 (i cant find 4.3 firmware anywhere). i go into download mode, put that file in PDA, and odin tells me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone is says SV REV Check Fail : Fused 2 > Binary 0
i was trying to find stuff out online and they said something about a bootloader and i have no clue what that means. also, cyanogenmod is no longer even going to the home screen so my phone is not functioning at all. and since it isnt loading, my computer isnt detecting a device so i cant add any files to my phone.
can someone please help me? using english please, not computer hacker language. im not that advanced in this kind of stuff.
Click to expand...
Click to collapse
if you still can go into downloadmode, you can unroot your device and put it back to stock with Kies 3.
Download Kies 3 from samsung web site and download Samsung USB Drivers too
Unplug your phone from the PC
After on Kies 3 click on tools>emergency firmware update and inisialitazion.
Now they will ask for your phone model so if you are on at&t its : SGH-I747 (Rogers bell .. tis : SGH-I747M
After, Kies 3 will ask you your S/N (this can be found under your battery the sticker) so remove your battery and write it down
Know if it work they gonna tell you to put your phone into download mode
To go into download mode hold : Volume Down + Home Button + Power button
After on your phone you should see a Yellow triangle with some warning (jUst ignore that and press the volume up button)
And Kies 3 will automaticly unroot your phone, flash the new 4.3 update and flash the new bootloader too.
!!!***WATCH OUT! DO A BACK UP OF YOUR INTERNAL MEMORY BECAUSE YOU ARE GOING TO LOSE EVERYTHING***!!!
And after you just have to wait.... Kies 3 will download automaticly 4.3 Firmware and flash it on your phone.
Make shure that your battery is charged at least at 30% before doing that.
And after enjoy your phone unrooted and on stock rom and after you will be still able to update your phone for futurer update availble.
Tell me if it worked for you after!

[Q] Sprint Galaxy S3, Trying to flash Stock ROM, ODIN 3.07, Stuck on sbl2.mbn

I attempted to update my rooted Sprint Galaxy S3 via Kies to 4.3, although it did not finish. My phone was on during the initial running of Kies, the phone went into Download(ing... Do not turn off target) mode (Odin)
ODIN MODE
PRODUCT NAME: SPH-L710
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warrenty Bit: 0
BOOTLOADER AP SWREV: 1
After sitting for a substantial amount of time Kies states that it needs to do a Emergency Firmware Recovery, I attempt, but isn't able to do so. Assuming it has a problem working with ODIN MODE, I run the alternative method of flashing the Stock ROM to my phone using ODIN 3.07 (in administrative mode/ Windows 8)
I download the ROM: KIES_HOME_L710VPBLJ7_L710SPRBLJ7_329968_REV03_user_low_ship.tar.md5
I follow the guide for putting the ROM into the PDA spot,
when I select the ROM from my folder it shows this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBLJ7_L710SPRBLJ7_329968_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
I then Start ODIN:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
This is as far as it will go.
I've restarted the system and ran it again just as described.
I've reinstalled Samsung USB Drivers
I've looked for another Stock ROM, but the Sammobile.com/firmware downloads aren't available due to the hosting site.
Please, if anyone has had this problem and has fixed it, or anyone that knows why it is stopping at sbl2.mbn contact me here or at [email protected].

dcbstudios said:
I attempted to update my rooted Sprint Galaxy S3 via Kies to 4.3, although it did not finish. My phone was on during the initial running of Kies, the phone went into Download(ing... Do not turn off target) mode (Odin)
ODIN MODE
PRODUCT NAME: SPH-L710
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warrenty Bit: 0
BOOTLOADER AP SWREV: 1
After sitting for a substantial amount of time Kies states that it needs to do a Emergency Firmware Recovery, I attempt, but isn't able to do so. Assuming it has a problem working with ODIN MODE, I run the alternative method of flashing the Stock ROM to my phone using ODIN 3.07 (in administrative mode/ Windows 8)
I download the ROM: KIES_HOME_L710VPBLJ7_L710SPRBLJ7_329968_REV03_user_low_ship.tar.md5
I follow the guide for putting the ROM into the PDA spot,
when I select the ROM from my folder it shows this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBLJ7_L710SPRBLJ7_329968_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
I then Start ODIN:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
This is as far as it will go.
I've restarted the system and ran it again just as described.
I've reinstalled Samsung USB Drivers
I've looked for another Stock ROM, but the Sammobile.com/firmware downloads aren't available due to the hosting site.
Please, if anyone has had this problem and has fixed it, or anyone that knows why it is stopping at sbl2.mbn contact me here or at [email protected].
Click to expand...
Click to collapse
I would assume its because you're attempting to downgrade. Try this in Odin instead
http://rwilco12.com/Files/Devices/S...0VPUCMK3_L710SPRCMK3_L710VPUCMK3_HOME.tar.exe

At this point, DO NOT reboot the phone. If you had read the Knox faq, you would know that attempting to flash a < MK3 stock tar will while on the Knox bootloader will immediately brick your phone because the older firmware will not get written. Right now, you need to immediately flash an MK3 full stock tar if you don't want a fancy paperweight.

CNexus said:
At this point, DO NOT reboot the phone. If you had read the Knox faq, you would know that attempting to flash a < MK3 stock tar will while on the Knox bootloader will immediately brick your phone because the older firmware will not get written. Right now, you need to immediately flash an MK3 full stock tar if you don't want a fancy paperweight.
Click to expand...
Click to collapse
The previous gentleman sent me a link to the MK3 update. I tried to run it through ODIN but it just hangs at
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L710VPUCMK3_L710SPRCMK3_L710VPUCMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn

Jessooca said:
Don't use a pit file and don't check repartition.
Use Odin 1.87 it hasn't given me an issue flashing the latest tar file
Sent from my SPH-L710 using xda app-developers app
---------- Post added at 04:51 PM ---------- Previous post was at 04:49 PM ----------
Also use a download manager to download the stock tar, that way you won't have a wonky download which sounds like is your case possibly
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
What would you recommend as a download manager? If you don't mind me asking.
After running the tar I got from a previous post, a MK3 tar, it gives me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L710VPUCMK3_L710SPRCMK3_L710VPUCMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This time passing sbl2.mbn.....but shouldn't it also load sbl1.mbn and sbl3.mbn....i've seen it listed in so many other posts.

Thank you for the tar file. I'm also curious on the the topic...are there more than one Odin? I have Odin3, (some sites refer to it as Odin3, ODIN, or just Odin) versions 1.87 (the one you told me to try), 3.07, and 3.09. I wasn't under the impression that certain versions of Odin worked better for some than others. Do they? And, is Odin and Odin3 different? I appreciate your help on this subject.

Uninstalled the USB drivers then reinstalled them with SGS3 tool kit, swapped to original cable from Samsung galaxy s4,, as well as USB port... It has a status bar on Odin first time .... Hold tight.

IT PASSED!
To be clear for people that have this same problem in the future...
Uninstall Kies, if you have it
Run a registry cleaner, I used CCleaner
Install Samsung Galaxy USB Drivers through SGS3 Toolkit
Use Odin 1.87 in Admin
Use MK3 tar in PDA section, leave auto reboot and reset time
Use original or I'm assuming Samsung USB cable
If one port doesnt work, try another USB port
Thank you everyone for your input and help, folks like you make this site worth using. :good:

Still having the same problem!!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L710VPUCMK3_L710SPRCMK3_L710VPUCMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Did you follow the instructions two posts before yours?
Sent from my Sprint Samsung Galaxy SIII with M.O.A.R. v9.0, dkp kernel dated 3/20/2014 and TWRP v2.7.0.0.

FUNNY!!!!
someone tell me im using the wrong Soft because my phone is "BLUE"...??? i so i tried this one
L710VPUDND8_L710SPRDND8_SPR.zip
and it works...:laugh::laugh::laugh::laugh::laugh:

Trying to get to stock from CM 11 with no luck

Hello!
So i've been failing at getting this SGS4 SCH-M919 back to stock firmware. I have CM11 nightly installed. (This is my bosses phone that i'm trying to get back to stock) So far, I've downloaded two stock firmware images (just in case firs was corrupt) and they both haven't worked.
My process goes like:
-Download drivers (or Kies, i've tried both)
-Set into recovery mode
-Start Odin (i've tried in a few versions)
-Plug phone in
-Odin recognizes
-choose file to flash
-Start the flash then I'll always get this error
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
After that, i'm in a little brick mode that I can easily get out of my flashing CWM Recovery on there, and it'll boot me back into CM11.
So, any ideas? I've tried two computers, restarted...idk what to do anymore.
Thank you to anyone who tries to help me!

Looks like you're trying to flash older firmware which will never work if the device has been updated to 4.3 and up.. You need to flash either 4.3 or 4.4.2. 4.3 will work if that was the firmware they had before flashing cm11.. Otherwise you need to flash 4.4.2
Sent from my SGH-M919 using Tapatalk

can't flash stock rom on Odin, stacked !! help!!!

Hi all, so I installed the cyanogenmod's new update, I used its in the system update, thought it will be pretty safe just like a stock android update, but then my phone stuck at boot screen. and I really don't have time to mingle with the system right now. I need the phone like 3 hours ago!! i downloaded the stock rom and try to use odin to flash it. then it gives me this error message.
I tried, change the cable, change usb port, change odin version, but nothing works so far. (((
Please help !!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

You have the 4.3 bootloader on your phone? If you do, you can't use Odin to flash a stock ROM because it may brick your phone. You can only use Odin to flash a 4.3 stock ROM that had specifically been compiled for use with Odin.

audit13 said:
You have the 4.3 bootloader on your phone? If you do, you can't use Odin to flash a stock ROM because it may brick your phone. You can only use Odin to flash a 4.3 stock ROM that had specifically been compiled for use with Odin.
Click to expand...
Click to collapse
Is there a 4.3 rom we can flash with odin? I attempted (stupidly) to flash stock after a CM11 nightly caused a bootloop and would not allow me to enter recovery. All I can do for the moment is enter download mode. Every rom I try to flash I get the same error along with the error on my phone reading:
SW REV CHECK FAIL : Fused 2 > Binary 0
Is there anything I can do?
EDIT: Finally found a fix. I flashed a rom from this thread.
http://forum.xda-developers.com/showthread.php?t=1980683
Just go to their website and download the file for your specific model. After flashing my phone booted up in CM11 (what I previously had installed) but it crashed upon loading the lockscreen. Luckily I could enter recovery mode and do a factory reset. This fixed everything!

[Q] Stuck in Bootloop and ODIN isn't working

I'm on 4.4.4 AOKP and I accidentally formatted something in recovery and got stuck in bootloop. Downloaded stock TW for S3 but everytime ODIN keeps giving me an error.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Also, can't seem to be able to get CWM or TWRP back on but I can get the stock recovery. Tried Kies but that didn't work. Been looking for stuff for a couple hours and can't seem to find an answer. Any help is appreciated, thanks.

I'm in a similar situation but in my case I have cwm but can't switch recovery or even upgrade it, and flashing roms doesn't stick.
Sent from my SM-N900T using XDA Premium 4 mobile app

TheAccomplisher said:
I'm on 4.4.4 AOKP and I accidentally formatted something in recovery and got stuck in bootloop. Downloaded stock TW for S3 but everytime ODIN keeps giving me an error.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Also, can't seem to be able to get CWM or TWRP back on but I can get the stock recovery. Tried Kies but that didn't work. Been looking for stuff for a couple hours and can't seem to find an answer. Any help is appreciated, thanks.
Click to expand...
Click to collapse
Are you able to boot in recovery? (home + vol up + power) - You could just reflash from there.
Do you know what you formatted in recovery?

I can get to recovery and download mode but I'm on stock recovery and can't flash anything. I must have formatted /system or /data

TheAccomplisher said:
I can get to recovery and download mode but I'm on stock recovery and can't flash anything. I must have formatted /system or /data
Click to expand...
Click to collapse
Have you tried flashing a custom recovery through Odin?
Also, if you're on 4.4.4, chances are that your bootloaders are on 4.3+. You'll need the MJB (4.3) or NE4 (4.4.2) stock to flash through Odin.
Downgrading bootloaders will result in a brick, therefore it's a good thing it's not going through!

I flashed TWRP and got a pass but every time I get into recovery mode I just get a black screen.
Where can I get NE4?
Thanks

TheAccomplisher said:
I flashed TWRP and got a pass but every time I get into recovery mode I just get a black screen.
Where can I get NE4?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2789917
If already on the MJB bootloaders/modem: http://forum.xda-developers.com/galaxy-s3-att/general/ucuemjb-to-ucufne4-firmware-update-t2808654

Since I'm on 4.4.4 I already have the MJB right?

TheAccomplisher said:
Since I'm on 4.4.4 I already have the MJB right?
Click to expand...
Click to collapse
I think so but you only can be sure if you updated your bootloaders to 4.3 (or up to the new NE4 4.4.2).

All right thanks I'll have to try it in a couple hours

TheAccomplisher said:
Since I'm on 4.4.4 I already have the MJB right?
Click to expand...
Click to collapse
The error at aboot.mbn tells me you have the 4.3 bootloader on your phone. By trying to flash a stock Samsung ROM in Odin means Odin will try and downgrade the bootloader to an older version which cannot be done once you are on a stock 4.3 bootloader. Don't keep using Odin to flash a stock Samsung ROM as it may brick your phone.

TheAccomplisher said:
I'm on 4.4.4 AOKP and I accidentally formatted something in recovery and got stuck in bootloop. Downloaded stock TW for S3 but everytime ODIN keeps giving me an error.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Also, can't seem to be able to get CWM or TWRP back on but I can get the stock recovery. Tried Kies but that didn't work. Been looking for stuff for a couple hours and can't seem to find an answer. Any help is appreciated, thanks.
Click to expand...
Click to collapse
Any update on this?
Sent from my SM-N900T using XDA Premium 4 mobile app

Everything is working perfect now and I'm on 4.4.2

TheAccomplisher said:
Everything is working perfect now and I'm on 4.4.2
Click to expand...
Click to collapse
What did you do to fix your problem?
Sent from my SM-N900T using XDA Premium 4 mobile app