Is it possible to flash P-601 Rom to P-602 after rooting - Galaxy Note 10.1 (2014 Edition) Q&A, Help & Troubl

Hi,
Here in Turkey an 3G data only variant note 10.1 is available on the market. I think there is a software limitation on gsm calling. What is the safe way to try 3g calling enabled roms on our variant.
If i try to flash p605 or p601 roms with odin, will it bricks my device ?
What if custom recoveries and modified roms ?
I'am a newbei in android development and devices but excerienced in IT so any help welcome

macrostr said:
Hi,
Here in Turkey an 3G data only variant note 10.1 is available on the market. I think there is a software limitation on gsm calling. What is the safe way to try 3g calling enabled roms on our variant.
If i try to flash p605 or p601 roms with odin, will it bricks my device ?
What if custom recoveries and modified roms ?
I'am a newbei in android development and devices but excerienced in IT so any help welcome
Click to expand...
Click to collapse
I am working on same issue too my friend. If u need help feel free to contact me. (Im from Turkey too so feel free to pm in turkish.. )
Anyway for now i flashed sm-p601 firmware to my p602 but have some problems. Device seems working booting and can enter settings menu but have problems to install applications. I believe the problem is knox or smtg like that now i am searching for a pit file of sm-p601 16gb so i will try to convert my device totally.

I installed TWRP 2.6.3.3 to sm-p602 and rooted with the TWRP autoroot function. Then I try to install p601 aroma custom rom, device boots without a problem but application installer stops just before home screen. I made a call to the gsm line of the tablet, tablet rings but it loses the signal in two seconds.
biohazardious>I can't send PM over XDA forums, please contact me over [email protected] replace "3" chars with "a" chars

I'am also in Ankara

Succesfully flashed the Modem.bin. (601*****MJ8) it did't break any think. When i call my device it shows missing call, when i click call back it only shows the number. There is no call buttons on the contact detail.
There is radio.img and cmda-radio.img parts on the emmc. are they need to be replaced ? Or may be CSC configuration is responsible for this ? Is there any ideas ? please...

macrostr said:
Succesfully flashed the Modem.bin. (601*****MJ8) it did't break any think. When i call my device it shows missing call, when i click call back it only shows the number. There is no call buttons on the contact detail.
There is radio.img and cmda-radio.img parts on the emmc. are they need to be replaced ? Or may be CSC configuration is responsible for this ? Is there any ideas ? please...
Click to expand...
Click to collapse
Is it successfully installed ? No stoped after booting?

Yes it worked, I am not experienced on samsung firmwares, I'll try step by step, First i'll add missing keys on CSC configuration, If it don't works , i'll try to flash only the kernel part of p601,if still don't will try to replace phone related parts of the system folder and apps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I make the phone function work ? make some calls and it was perfect. But lost the wifi connectivity ?. I only take the app, lib,framework and the etc folders of the p601 firmware. I am just trying as a newbee need ideas of experts....
SM-P602 cihazımdan Tapatalk kullanılarak gönderildi

Creating recovery zips and flashing it is really slowing my tryout, is there any safe way to push files to system folder ? i think i can do it with adb, Do i need to reboot tablet after that or do i need to wipe cache or something after pushing files ? I am writing to fill my 10 post quota

macrostr said:
I installed TWRP 2.6.3.3 to sm-p602 and rooted with the TWRP autoroot function. Then I try to install p601 aroma custom rom, device boots without a problem but application installer stops just before home screen. I made a call to the gsm line of the tablet, tablet rings but it loses the signal in two seconds.
biohazardious>I can't send PM over XDA forums, please contact me over [email protected] replace "3" chars with "a" chars
Click to expand...
Click to collapse
Hi
Did u fine any solution for this problem " device boots without a problem but application installer stops just before home screen"
I have the same problem on my p601
Sent from my SM-P601 using Tapatalk

Yes i just did but it is for p602. Flashing kernel + modem + system/lib+system/etc+system/framework and it works. I also delete wifi related files from that folders...
SM-P602 cihazımdan Tapatalk kullanılarak gönderildi

macrostr said:
Yes i just did but it is for p602. Flashing kernel + modem + system/lib+system/etc+system/framework and it works. I also delete wifi related files from that folders...
SM-P602 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Every time device restarts "application optimization" process takes about 2 minutes to complete. My system folder was containin apk and odex files but the p601 custom rom have only the apk files, is it related with that ?

here it is link to the development thread

Can we permanently p601? Do you need to install all the software mode? p601 is not sufficient load bootloader?
thanks
kalıcı olarak p601 yapabilirmiyiz ? hep modlu yazılım mı yüklemeliyiz?
p601 bootloaderi yüklesek yeterli olmazmı ?
teşekkürler

Related

Convert F240 To E988 UniversaL Version Easy Wey

Convert F240 To E988 UniversaL Version Easy Wey
This Method will work And Must be USed on Android 4.4 Kikat stock Rom only
I Had Flashed This Build .prop on F240L20G
JUST DOWNLOAD BUILD PRO FILE FROM ATTACHMENT AND COPY TEXT AND REPLACE WITH ANY TOOL ,
I HAVE USED
Jurassic_UniAndroid_TooL
http://www.4shared.com/rar/cggdenigba/Jurassic_UniAndroid_Setup_502_.html
BUILD.PROP UPDATED MODEL IS ALSO CHANGED TO E988
AND ACCESS POINT ALSO CAN BE ADD ABLE
FIRST ROOT YOUR MOBILE
use ioroot
download from here
http://downloads.codefi.re/autoprime/LG/ioroot/ioroot25r1.zip
http://downloads.codefi.re/autoprime/LG/ioroot/ioroot.zip
OPEN Jurassic_UniAndroid_TooL
GO TO BUILD.PROP TAB
CLICK ON DUMP
COPY ALL TEXT FROM F240L TO E988 -MOD.txt
THEN CLICK IN LOG WINDOW THEN PRESS CTRL+A
THEN CTRL+V
AFTER THIS ALL TEXT IN LOG WINDOW WILL BE REPLACED
THEN CLICK SAVE CHANGES
THEN CLICK FLASH
WAIT FOR PHONE REBOOT AND SUCCESS FULL MASSAGE .
after this no Korean in Dialpad
call to 111 and ussd code problem is also solved like *0# (for Pakistan Telenor Mobilink Operaters ) And All other operaters with these kinds of codes and numbers
no dual time on screen
no Roaming Dialogue prompt at dialing number
no more Sms Limit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is this okay if i use my LG G Pro F240L which has the stock kitkat rom?
Sent from my LG-F240L using XDA Free mobile app
@Akhtar Ali Jatt. Thanks bro.. Worked great... @chinodavis19 yes you can use it on 240l stock kitkat just replace the build.prop in root/system to the given one...
yasirchattha said:
@Akhtar Ali Jatt. Thanks bro.. Worked great... @chinodavis19 yes you can use it on 240l stock kitkat just replace the build.prop in root/system to the given one...
Click to expand...
Click to collapse
How did you do it?. Unable to replace build.prop file. Kindly provide the steps involved. My phone is rooted on stock kitkat. Thanks
@drajgvs your phone must be rooted..use any file explorer app that show root files
Thanx a lot.
Done and saved myself from flashing a custom rom due to mmi code imcompetency. Bro u r awesom. JazhakAllahu khairan.
:laugh:
so if i do this i can flash cm11 rom without having to flash cm11 kernel for f240l right ?
and many other roms for e988 ?
Having Problems
Salam Bro. I just replace the build.prop file but when I reboot the device It became unstable and some of the processes just stopped. e.g, com.android.phone and google services. And I was unable to use the Phone.
Thank God I had nandroid backup.
F240L (Rooted)
Jelly bean stock
SU + Busybox Installed
Recovery; TWRP
a-KNOW-nymous said:
Salam Bro. I just replace the build.prop file but when I reboot the device It became unstable and some of the processes just stopped. e.g, com.android.phone and google services. And I was unable to use the Phone.
Thank God I had nandroid backup.
F240L (Rooted)
Jelly bean stock
SU + Busybox Installed
Recovery; TWRP
Click to expand...
Click to collapse
you need to hardreset for once if you see those messages on startup , processes stopped working.
Unable to Boot After This
androidlabs said:
you need to hardreset for once if you see those messages on startup , processes stopped working.
Click to expand...
Click to collapse
I just replaced and now i am unable to start the phone. I did factory reset but no success. I am unable to boot in to recovery too .
i think it was JB 4.1.2 not Kitkat, so i made the mistake i guess .
How to restore build.prop ?
don't replace build.prop jus follow whole procedure ,
don't replace manually from sd card to root directory just flash with above procedure .
So, after converting it into international version, will I be able to flash custom ROM from development section?
hi.. after doing this procedure, my network provider service disable. It wont connect my carrier anymore
I Tried to flash back my backup build.prop but no luck
I tried factory reset and no luck
help please.
masjai said:
hi.. after doing this procedure, my network provider service disable. It wont connect my carrier anymore
I Tried to flash back my backup build.prop but no luck
I tried factory reset and no luck
help please.
Click to expand...
Click to collapse
Hello,
I am also getting this problem "Service Disabled" :crying:. Did you get any solution?
khawarshzd said:
Hello,
I am also getting this problem "Service Disabled" :crying:. Did you get any solution?
Click to expand...
Click to collapse
I have had same problem..this does not work for me too.
asingha94 said:
I have had same problem..this does not work for me too.
Click to expand...
Click to collapse
Anyone solved "Service Disabled" ?
Did you try this: service menu:
5457#*240#
hidden menu:
3845#*240#
It is not working with Kit Kat F240L20h version.
help me please
hey bro,
after doing this, my video calling option has gone from contacts and dialer. how do i add this option. please give me a solution.
i thought that after doing this conversion, i can make local video call from my sim. but no luck. please keep an eye on this.
help me asap
same problem for me also please send me bulid prop for 240k urgently.my email id is [email protected]
People who get No Service after editing build.prop Please Flash "Special Edition Lollipop" Rom and choose your respective model (240K,S,L). Your signals will be back.

[Q] Stock 4.4.2 on i9192: mobile signature not working

Hello,
I have a Samsung S4 mini duos. I am not sure where it was purchased, probably UK or DE.
I updated it to stock 4.4.2 from sammobile. Tried several firmwares, but WiFi was not working. These are not working: Sri lanka, Russia, New zealand. The only one I managed to support Wifi was this Panama ROM:
http://www.sammobile.com/firmwares/download/40033/I9192UBUCNG2_I9192UUBCNG2_TPA.zip/
I have also used CSC to set it to SEB (baltics).
Now everything is working fine more or less (battery life is bad on 3G, good on 2G), however I am unable to get mobile signature working. It was working fine on stock rooted 4.2.2. The card is inserted to SIM2, it is working properly: sending messages, calling, receiving calls. However, whenever I try to use mobile signature, I am asked by SMS toolkit (I guess) to check my data. When I click OK, it says ERROR DF 19 00.
My operator says this error is related to phone's software (I have tried it on other phone and it works). Anyone knows what is happening and how do I fix this?
Also are there any other stock roms available, closer to baltic states or UK/DE at least? Maybe Panama has some weird GSM settings.
And why does WiFi not work with other roms, like Russian?
Current version information is attached bellow.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fix
elektrinis said:
Hello,
I have a Samsung S4 mini duos. I am not sure where it was purchased, probably UK or DE.
I updated it to stock 4.4.2 from sammobile. Tried several firmwares, but WiFi was not working. These are not working: Sri lanka, Russia, New zealand. The only one I managed to support Wifi was this Panama ROM:
http://www.sammobile.com/firmwares/download/40033/I9192UBUCNG2_I9192UUBCNG2_TPA.zip/
I have also used CSC to set it to SEB (baltics).
Now everything is working fine more or less (battery life is bad on 3G, good on 2G), however I am unable to get mobile signature working. It was working fine on stock rooted 4.2.2. The card is inserted to SIM2, it is working properly: sending messages, calling, receiving calls. However, whenever I try to use mobile signature, I am asked by SMS toolkit (I guess) to check my data. When I click OK, it says ERROR DF 19 00.
My operator says this error is related to phone's software (I have tried it on other phone and it works). Anyone knows what is happening and how do I fix this?
Also are there any other stock roms available, closer to baltic states or UK/DE at least? Maybe Panama has some weird GSM settings.
And why does WiFi not work with other roms, like Russian?
Current version information is attached bellow.
Click to expand...
Click to collapse
Hi dude i pass for the same problem and the only you have to do is reflash the rom throu odin, for example i flash once the russian one and i did not have wifi working the first time, so i reflash it again and "voila" wifi start working,
look you can flash this rom http://forum.xda-developers.com/galaxy-s4-mini/development/s5-s4-mini-t2987500 via recovery and see if its work for you, use philz recovery to flash it, and in the installation process there will be a part where your select you CSC, and of course this rom have a very good battery improves Gl mate!
Flash rusian firmware until the baseband change
Power off phone using power key a menu
Restart in Odin mode using combo keys power home vol down
Flash firmware in ap
Let it boot and check if has changed
it is strange, but shutting down before flashing actually helped right away.
So now I am running stock russian (EN menu) firmware, however mobile signature is still not working.
Anyone familiar with SIM toolkit errors? Error DF 02 00 or DF 19 00.
Is there a log somewhere?

S4 mini GTI9192 no signal no wifi no network (unknown IMEI) no bluetooth

Dears ..
Please I appreciated your help to resolve this issue , I bought old S4 Mini dual sim i9192 , I tried to upgrade it manually from KitkaT to lollipop but when upgrading finished the device come up with no wifi no network no sound no IMEI no Bluetooth . please your support regards this ..
thanks
AP:I9192XXUCNG2
CSC:I9192SERCNG2
Ghazwan Salih said:
Dears ..
Please I appreciated your help to resolve this issue , I bought old S4 Mini dual sim i9192 , I tried to upgrade it manually from KitkaT to lollipop but when upgrading finished the device come up with no wifi no network no sound no IMEI no Bluetooth . please your support regards this ..
thanks
AP:I9192XXUCNG2
CSC:I9192SERCNG2
Click to expand...
Click to collapse
uppp please need your help
Ghazwan Salih said:
Dears ..
Please I appreciated your help to resolve this issue , I bought old S4 Mini dual sim i9192 , I tried to upgrade it manually from KitkaT to lollipop but when upgrading finished the device come up with no wifi no network no sound no IMEI no Bluetooth . please your support regards this ..
thanks
AP:I9192XXUCNG2
CSC:I9192SERCNG2
Click to expand...
Click to collapse
Flash stock firmware
Edit - even after flashing stock rom if you don't got your imei & network flash modem http://forum.xda-developers.com/showthread.php?t=2768593 Must work
Sureshtuty said:
Flash stock firmware
Edit - even after flashing stock rom if you don't got your imei & network flash modem http://forum.xda-developers.com/showthread.php?t=2768593 Must work
Click to expand...
Click to collapse
same problem
Ghazwan Salih said:
same problem
Click to expand...
Click to collapse
Did you flash modem?
Ghazwan Salih said:
same problem
Click to expand...
Click to collapse
Sureshtuty said:
Did you flash modem?
Click to expand...
Click to collapse
If you do flash modern, try flashing 3 times over because sometimes it takes a couple of flashes to stick for some people. Can't hurt.
RuffBuster said:
If you do flash modern, try flashing 3 times over because sometimes it takes a couple of flashes to stick for some people. Can't hurt.
Click to expand...
Click to collapse
Thank you all for your reply .. even trying many times to flash modem always my phone come up with no wifi no network no sound no IMEI . gonna cry :crying:
Ghazwan Salih said:
Thank you all for your reply .. even trying many times to flash modem always my phone come up with no wifi no network no sound no IMEI . gonna cry :crying:
Click to expand...
Click to collapse
Looks like you don't flash the stock firmware.
at first flash stock rom then flash modem
another problem
Sureshtuty said:
Looks like you don't flash the stock firmware.
at first flash stock rom then flash modem
Click to expand...
Click to collapse
Dears ..Please I had flashed a stock rom but now my phone dose not bring up may be boot-loader ?? see the attached image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
screeen
can some one tell me how i can choose the best modem to my phone
ODIN MODE
PRODUCT NAME : GT-I9192
CURRENT BINARY : CUSTOM
SYSTEM STATUS: OXO
KNOX WARRANTY VOID: 0X1
CSB-CONF16-LSB:0X30
BOOTLADER AP SWAEV: 2
WRITE PROTECTION ENABLE
Ghazwan Salih said:
Dears ..Please I had flashed a stock rom but now my phone dose not bring up may be boot-loader ?? see the attached image
Click to expand...
Click to collapse
looks like the downloaded file was corrupted. download it again & try
remove the battery & wait for 1 min then insert. Hold press vol down + home + power button at the same time download mode will appeare. Flash stock rom. Don't use the pc while flashing stock rom.

[Q] GT-N7105 Stuck on Samsung LOGO

Hello,
When i boot my phone, i cannot go further... :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can go into the ODIN MODE [VOLUME DOWN key and then press and hold the POWER button]
but when i try to go in recovery mode... [VOLUME DOWN key and then press and hold the POWER button]
I tried to flash a new rom with ODIN, downloaded on sam mobile, but it miserably failed...
I tried to fix it with kies, “Firmware Upgrade and Initialization" , it downloads something but doesnt do anything else..
What could i do to fix my phone?
I really appreciate any help you can provide. :good:
What error messages did you get in Odin?
@ Audit13
This is the error...
Looks like the phone is running a newer version of 4.4.2 than the firmware you are trying to flash. Download a version of 4.4.2 that is newer than nd3.
This is the only 4.4.2 available for my country sammobile.com
Maybe i should look, and download from another country, what do you think?
I'm experiencing the same issue as you with a N7100 tough.
I tried on a Windows VM with Odin, then on a physical Windows with Odin, then on a Linux machine with Heimdall, and it failed like you.
This is the log I have using heimdall: https://gist.github.com/wget/c898258625a076d07324385ada238572
And I was able to get the PIT file, but I don't know if the RECOVERY, SYSTEM and USERDATA partition are stil working https://gist.github.com/wget/695adc3aff04876a837b39f9fbbf53ab
My purpose is to be able to boot again to that device and recover its data.
You have tried different USB cables and USB ports?
Yes i did with various Samsung cable ,i also changed pc to try it, same error occured.
Can you flash a new recovery on it?
How do i flash a new recovery? Can you tell me what can i do with a new recovery ? (i ve read some informations about flashing recovery / custom recovery , but i dont really know how to proceed.)
andrewKode said:
Can you flash a new recovery on it?
Click to expand...
Click to collapse
How does this work?
Funland said:
How does this work?
Click to expand...
Click to collapse
Using Odin you can flash TWRP recovery and wipe everything on your phone. After that you can try to flash Stock again or a custom ROM. Maybe a CyanogenMod based. Good luck!
Trimis de pe al meu GT-N7100 folosind Tapatalk
Hello,
Using Odin you can flash TWRP recovery and wipe everything on your phone. After that you can try to flash Stock again or a custom ROM. Maybe a CyanogenMod based. Good luck!
Trimis de pe al meu GT-N7100 folosind Tapatalk
Click to expand...
Click to collapse
I tried this method, and this is what i get , maybe i'am doing something bad, what could be wrong?
I should wipe whole phone first in order to try this method?
i have the same with my N7100
was working great and suddenly stuck on Samsung logo.
all my screenshots are the same like above
one more is that when i go in download mode and connect to a pc i get the unknown device status
looks like everything is erased
if anyone can help please do
My i317 did the same thing all of a sudden....was running stock, no root. everything was fine and then poof, samsung logo.... now the phone won't even turn on anymore. Heard it's SDS so I got a hold of an old n7105 and switched the motherboard. Now looking for a ROM to flash since I'm starting from scratch again
I tried to install the recovery but it didnt work ( look my previous post)
What could i do to save my phone?
Hello , I'am still stuck with my phone. I don't really know what to do. I hope i can do something with this mobile phone , i dont want to throw it away.
If someone could help me
Funland said:
Hello , I'am still stuck with my phone. I don't really know what to do. I hope i can do something with this mobile phone , i dont want to throw it away.
If someone could help me
Click to expand...
Click to collapse
I also experience the same... Have you solve this problem? Thank you...

Unable to make calls: "Selected Network (Digi.Mobil) not available" + changed imei

Unable to make calls: "Selected Network (Digi.Mobil) not available" + changed imei
Hi,
I have a GT-n7100, last morning when tried to use my phone I couldn't make any calls, the dialer returns:
Not registered on network
Click to expand...
Click to collapse
And have a notification as well:
Selected Network (Digi.Mobil) not available
Click to expand...
Click to collapse
- Tried to select my carrier manually, change network mode to GSM/3G/WCDMA, no luck
- Tried doing a ping test, "IP address not reachable"
- tried to Turn on SMS over IMS and reboot, still nothing
Device information displays the following:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My imei now shows: 004999010640000/01 - it may be not relevant.
I would really appreciate your opinion on what could be wrong and how to fix this.
Thanks!!
Have you tried flashing or re-flashing the phone with the latest stock ROM from sammobile.com?
audit13 said:
Have you tried flashing or re-flashing the phone with the latest stock ROM from sammobile.com?
Click to expand...
Click to collapse
Not yet, I thought there is something I can do about the modem before flashing the whole thing, the problem is I'm kinda noob when it comes to fleshing, I did it once while almost bricking my phone
Could you please point me to some resources on how to do it?
audit13 said:
Have you tried flashing or re-flashing the phone with the latest stock ROM from sammobile.com?
Click to expand...
Click to collapse
Btw, I am using a mac, so odin isn't easy and secure to use on this computer (trough emulator, maybe). I was browsing the forum for an SD card install but no luck.
Is the phone running a stock or custom ROM?
This thread may help to flash a stock ROM: https://forum.xda-developers.com/showthread.php?t=1896696
audit13 said:
Is the phone running a stock or custom ROM?
This thread may help to flash a stock ROM: https://forum.xda-developers.com/showthread.php?t=1896696
Click to expand...
Click to collapse
Its stock 4.3. Thanks for the link, I've tried downloading the original rom from samobile, but it keeps getting interrupted after 10-20 minutes gonna keep trying. Is there eventually another custom mod worth trying if I fail to download the original rom?
Thanks!
You are sure that gt-n7100 is the model # shown in download mode too?
These links may be faster: https://samsung-firmware.org/model/GT-N7100/
audit13 said:
You are sure that gt-n7100 is the model # shown in download mode too?
These links may be faster: https://samsung-firmware.org/model/GT-N7100/
Click to expand...
Click to collapse
Thanks for the link!! Downloading already...
To your question, if I understand right, my model #:
The model number can be faked in the ROM which is why I always boot into download mode to confirm the model number.
audit13 said:
The model number can be faked in the ROM which is why I always boot into download mode to confirm the model number.
Click to expand...
Click to collapse
Wow, thanks for the suggestion, download screen shows the following:
Product name: GT-n7100
Custom binary download: Yes (2 counts)
Current binary: Custom
System Status: Custom
Knox Warranty: VOID: 1
AP SWREV: A2
This means its custom?
Any luck? I see that the phone is running a custom ROM or is rooted?
audit13 said:
Any luck? I see that the phone is running a custom ROM or is rooted?
Click to expand...
Click to collapse
Hi mate,
Just managed to flash it using the latest rom available, thankfully it went quite smooth.
Unfortunatelly I still face the: "Selected Network (Digi.Mobil) not available" I'm wondering what else could I do? Btw my imei is: 004999010640000/01, found a post on xda that this is some kind of a generic imei. Do you have any idea?
Thanks!
Do you have a back up of the efs folder? Do you know the original IMEI?
audit13 said:
Do you have a back up of the efs folder? Do you know the original IMEI?
Click to expand...
Click to collapse
Unfortunately no backup and my original motherboard was replaced about a year ago, and from then on I don't know the exact IMEI.
If you had the original IMEI, you could take it to a cell repair shop to change back to the original imei.
Not sure how to fix the issue since you don't have a EFS backup.
audit13 said:
If you had the original IMEI, you could take it to a cell repair shop to change back to the original imei.
Not sure how to fix the issue since you don't have a EFS backup.
Click to expand...
Click to collapse
Oh wait, I still have the original IMEI on the box that came with my note 2 when I bought it. Is it possible to use that IMEI for the refurbished mainboard?
Thanks!
I was referring to the imei for the refurbished motherboard.
audit13 said:
I was referring to the imei for the refurbished motherboard.
Click to expand...
Click to collapse
That one unfortunately I don't know... Thanks for your support anyway.

Categories

Resources