Hello !
Kernel-Build from source
Because I was able to build the Kernel from Huawei's source(3.0.8) for Huawei Ascend P6 ,
I want to open a Topic for Questions and Answers ! (like Surdu Petru did for his CM)
Post Questions and Ideas about this topic here :
Thanks !
regards,
raolleel
To build the kernel you need the source from huawei:
Chinese : http://download-c.huawei.com/download/downloadCenter?downloadId=16381&siteCode=cn (3.0.8) [B111]
International: http://download-c.huawei.com/download/downloadCenter?downloadId=17788&siteCode=worldwide) (3.08) [B111]
You also need the right toolchain : https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.6
Little Tutorial to compile the kernel (Linux):
extract your source-file and your toolchain (only the 4.6 toolchain works)
open a terminal and cd into the source
now type:
export ARCH=arm (select architecture of your phone)
export SUBARCH=arm (select architecture of your phone)
export CROSS_COMPILE=[path to your toolchain]/arm-linux-androideabi-4.6/prebuilt/linux-x86_64/bin/arm-linux-androideabi- (tell the Kernel, where your compiler is)
make clean && make mrproper (to clean the source)
make hisi_k3v2oem1_defconfig ARCH=arm (to load the default config of your phone)
make menuconfig (configue the Kernel [dont change settings you don't know, or your kernel will not work)
make -j[number of your cpu-cores+1] ARCH=arm (This will start the process .. will take some time)
make ARCH=arm zImage
Click to expand...
Click to collapse
now you have your zImage of the kernel
raolleel said:
To build the kernel you need the source from huawei:
Chinese : http://download-c.huawei.com/download/downloadCenter?downloadId=16381&siteCode=cn (3.0.8) [B112]
International: http://consumer.huawei.com/en/support/downloads/index.htm?id=7583(3.0.8) [sorry site is not awaliable (i think huawei has some problems with its website)]
You also need the right toolchain : https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.6 [B112]
Little Tutorial to compile the kernel (Linux):
extract your source-file and your toolchain (only the 4.6 toolchain works)
open a terminal and cd into the source
now type:
now you have your zImage of the kernel
Click to expand...
Click to collapse
International: http://download-c.huawei.com/download/downloadCenter?downloadId=17788&siteCode=worldwide
Kernel-Build-From-Source
Hi, I have compiled the International Kernel (3.0.8) and only added the compression to resize the Kernel a little bit.
Here is the zImage :
http://www.androidfilehost.com/?fid=23269279319201652
Btw. it is not tested (because my phone is in repair), only for devs
Its only a proof-of-concept
raolleel said:
Hello !
Kernel-Build from source
Because I was able to build the Kernel from Huawei's source(3.0.8) for Huawei Ascend P6 ,
I want to open a Topic for Questions and Answers ! (like Surdu Petru did for his CM)
Post Questions and Ideas about this topic here :
Thanks !
regards,
raolleel
Click to expand...
Click to collapse
So, can you build a custom kernel for this phone and we would get much better perfomance? Just asking.
BluntP6 said:
So, can you build a custom kernel for this phone and we would get much better perfomance? Just asking.
Click to expand...
Click to collapse
Much better .. not at this point ... but in the future ... maybee
I just started to get an idear how this phone really is ^^
At first, I was a little bit confused of the rom/kernel-history:
Code:
B107 International 4.2.2 -> 3.0.8-0769-g8cca155
B108 International 4.2.2 -> 3.0.8-0772-g83e47c3
B109SP02 International 4.2.2 -> 3.0.8-0779-g33784a0
B111 International 4.2.2 -> 3.0.8-0780-g62cb956
B112 International 4.2.2 -> 3.0.8-0780-g62cb956
B114 International 4.2.2 -> 3.0.8-0781-g88bfdc2
B118 International 4.2.2 -> 3.0.8-00788-g5d19ba2
B119 International 4.2.2 -> 3.0.8-00794-g8845b56
B125 International 4.2.2 -> 3.0.8-00795-g35bf84a
B109SP02 China 4.2.2 -> ?
B112SP01 China 4.2.2 -> ?
B115 China 4.2.2 -> 3.0.8-0802-g081004a
B116SP01 China 4.2.2 -> 3.0.8-00821-g6fd9b1d
B117SP01 China 4.2.2 -> 3.0.8-00829-gb6fffbf
B118 China 4.2.2 -> 3.0.8-00844
Everyone talks about that there are many different kernels, and that we only have the source of B111, but ... for me it sounds like there is only the kernel 3.0.8 (like we have the source) ... the code after the - is only a code to tell, when the kernel was builded/who builded the kernel
The Source is the Linux/Android-Kernel 3.0.8 (no subversion nothing added)
So a Kernel build with this source should work on every Firmware with the 3.0.8-kernel.
But we have another Problem.
To get the zImage working, you need the Boot.img ...
OK you can extract it via Huawei-Update-Extractor, but "abootimg" tells:
Code:
B111/BOOT.img: no Android Magic Value
B111/BOOT.img: not a valid Android Boot Image.
B118China/09.boot.img: no Android Magic Value
B118China/09.boot.img: not a valid Android Boot Image.
B125/09.boot.img: no Android Magic Value
B125/09.boot.img: not a valid Android Boot Image.
So at this point we can't put a zImage into boot.img because of wrong filesystem (I'll have a idear how to get out of this trouble, but I need some time)
Also there is a question, can't we simply flash 07.fastboot.img (from B118CH) over the B125International-Rom (to get the "bootloader unlocked")
We should be able to do this with dd, or am I wrong.
Some people told that they are able to flash the B125 without loosing the "unlocked-BL", so B125 must be able to boot.
Correct me if I'm wrong.
I'm only trying to get kernel-developing started ^^
I found a little Tool, by CNexus, which is able to extract and rebuild our boot.img
So I manged to make a boot.img (with slightly modified kernel) (B118CN)
My phone is in repair, so I need testers, but I want to say, this can brick your phone and I'm not responsible for this !
[DEV-ONLY] AOKP-Kernel 3.0.8 (International)
Untested AOSP-Kernel
Source:
Ascend P6 Open Source(P6-U06,JellyBean,kernel-3.0.8)
Click to expand...
Click to collapse
Features:
First Build
Only Added "Optimize for size" (so that the kernel should work without problems)
Click to expand...
Click to collapse
Credits:
m!k3 (for the right download-link ^^)
Huawei (for releasing this source)
CNexus (for his wonderful Boot.img tools)
worstenbrood (for his Huawei Update Extractor)
raolleel (Building the kernels)
Click to expand...
Click to collapse
Warning:
keep in mind : THIS IS NOT TESTED
tell me which bugs are there, or if this doesn't work
Only Works with Unlocked Bootloader, so you must have been on B118CN
Should work with B118CN
Should work with B125 if you were on B118Cn before
Could work with B111 if your Bootloader is not relocked when you flash B111 from B118CN
(only released because everyone said that the kernel is only for B111 [which I can't belive)
I am not responsible for bricking/destroying your phone. Custom kernels comes with no warranty.
Click to expand...
Click to collapse
Download (Testing-Build):
B111
B118CN
B125
Click to expand...
Click to collapse
A little Question/Conclusion
Huawei uses the same Kernel for CN and International Roms
So the orginal Kernel supports K3V2OEM1 Board and K3V2OEM2 Board
.. the kernel should be a little bit smaller if we remove one of this ...
so you get support for K3V2OEM1 (International ?)
or K3V2OEM2 (CN ?)
I tried Booting the B125 img, I'm on B118CN however the link for it leads to a 1.2MB file so based on previous kernel building experience I think the size is not right for a boot.img
Anyways, I tried with
Code:
fastboot boot boot.img
And failed to boot, the output was:
Code:
downloading 'boot.img'...
OKAY [ 0.233s]
booting...
FAILED (remote: invalid command)
finished. total time: 0.236s
I didn't want to flash it straight to the phone, might give it a try to build a test kernel later on today and see how it goes as well.
Regards,
Jimbo
jimbo77 said:
I tried Booting the B125 img, I'm on B118CN however the link for it leads to a 1.2MB file so based on previous kernel building experience I think the size is not right for a boot.img
Anyways, I tried with
Code:
fastboot boot boot.img
And failed to boot, the output was:
Code:
downloading 'boot.img'...
OKAY [ 0.233s]
booting...
FAILED (remote: invalid command)
finished. total time: 0.236s
I didn't want to flash it straight to the phone, might give it a try to build a test kernel later on today and see how it goes as well.
Regards,
Jimbo
Click to expand...
Click to collapse
Oh looks like androidfilehost is a ****ty hoster ^^
all boot.imgs are about 5MB
Yeap, the only one with a smaller size is the 118CN llink the other files are fine. Do you think it will make any difference to flash it to the phone (Using fastboot flash boot boot.img) instead of trying booting it from fastboot?
I uploaded all files to my Dropbox .. links are changed
It should work .. at least I hope it does
Its a testing-build .. and Huawei did many things with there source, which are ... not really intelligent ^^
Also the procedure to include the Kernel (zImage) to boot.img is untested, but I hope it will work
raolleel said:
I uploaded all files to my Dropbox .. links are changed
It should work .. at least I hope it does
Its a testing-build .. and Huawei did many things with there source, which are ... not really intelligent ^^
Also the procedure to include the Kernel (zImage) to boot.img is untested, but I hope it will work
Click to expand...
Click to collapse
Check your PM, i've sent you something we can try. Based on my experience with the S3, there was a script to generate the boot.img from within the phone using the existing ramdisk and a new Zimage. We might give it a try, also have you tried decompiling stock boot.img and see the contents of the ramdisk?
jimbo77 said:
Check your PM, i've sent you something we can try. Based on my experience with the S3, there was a script to generate the boot.img from within the phone using the existing ramdisk and a new Zimage. We might give it a try, also have you tried decompiling stock boot.img and see the contents of the ramdisk?
Click to expand...
Click to collapse
I extracted the Boot.img out of the three roms, unpacked it, and simply repacked it with the new zImage
.. But also, I can't work on my phone at this moment, its in repair .. (screen is not working like it should)
It works... I finally decided to use fastboot flash boot and it booted. Also the procedure I sent you via PM works too... I'll send you the zip file I used, probably it's a more user friendly way to update a kernel.
This is great, I'll soon start a kernel test as well. Been itching since I builded kernels for the 2011 Sony phones.
Good work!
Sent from my P6-U06 using Tapatalk
Cool .. that sounds nice .. then I can open a Tread in Orginal Android developing ^^
Again I am a little bit confused ..
the kernel-source of huawei has MHL-Support enabled by default ...
I thought the P6 doesn't have an MHL-option
I have no idea of kernels or github, but i see a huawei kernel 3.4 in there: https://github.com/Dazzozo/huawei-kernel-3.4
Dream come true ?
its not for k3v2....
Related
Advanced Stock ICS Kernel for Xperia SHere is a kernel based on the Stock ICS kernel with some features which come from DoomLord's GB kernel.
Features
autorooting
CWM recovery (with reboot recovery support)
init.d support (thanks DoomLord)
TUN/TAP driver
Download links
Build 17 (Fastboot)
Build 17 (CWM)
Build 16 (Fastboot)
Build 16 (CWM)
Prerequisites
An unlocked bootloader: Tuto here.
A stock ICS ROM (6.1.A.0.452 to 6.1.A.2.55). Don't expect this kernel to work with CM9/10.
How to flash
For elf files :
Read DoomLord's guide
You just have to replace kernel.elf by the name of the downloaded kernel in the flash command (eg : ics4.elf)
For zip files:
Flash the zip file from the recovery
Changelogs
Build 17 (08/12/12) :
Merge 6.1.A.2.55 kernel sources
Autodetect rom version in default.prop based on build.prop
Updated recovery, adbd and busybox (JB version)
Build 16 (01/11/12) :
Random reboot issue probably fixed (patch from CM10 kernel, thanks Kali)
Rom version increased to 6.1.A.2.50
Updated recovery, adbd and busybox (JB version)
SD card mounted by default in recovery
Vibration at boot removed, only led and backlight now
Build 15 (05/09/12) : Increase ROM version in default.prop from 6.1.A.0.452 to 6.1.A.2.45
Build 14 :
New MMC driver (from codeaurora) : it fixes issue while formatting partitions in CWM
Wifi module built from source (in the ramdisk)
Updated recovery
Disable again hardware clock
Build 13 :
Backup / Restore fixed with dedupe
Backlight enabled in CWM
Better "reboot recovery" handling in adbd / busybox and recovery
Build 12 :
Updated recovery
Hardware clock correctly saved (from CM9 kernel)
Build 11 : Go back to GCC 4.4 (fix artifacts with camera preview)
Build 10 :
Kernel built with GCC 4.6
Several autoroot fixes (Superuser app pushed just once and correctly removed in /data)
Working reboot recovery command (with adb too)
Updated su (3.1.1) and Superuser (3.1.3)
A bunch of new command included in the new busybox (ifconfig, wget, vi, and many more !)
Build 9 :
Kernel built from sources
TUN/TAP driver included (for VPN)
Build 8 : Fix mass storage in CWM
Build 7 : Fix MTP
Build 6 : Key mapping in CWM fixed
Build 5 :
New recovery built from latest CM9 sources
Fixed generation of md5sum with nandroid
Increased font size in CWM
Boot partition backup and restore
New adbd built from CM9 sources (fixed an issue with hardcoded sh path in /system)
Build 4 :
Correct su binary
Don't wait 3 sec if /cache/recovery/boot exists
Build 3 :
Leds and vibrator at startup fixed
Sources
Ramdisk sources
Kernel sources
Credits
DoomLord : many thanks to him for its kernel and all his scripts.
championswimmer and sminki for their help
FreeXperia team for their work on CM
makes it perfectly start does not make any errors
greetings and thanks
yes it boots!
(maybe you can help with my Question here )
Hey, I also have tested several times to include recovery, but withut succes, didn't get any further then a booting kernel without recovery or vibration and LED on to enter recovery but no entering recovery and kernel that doesn't boot.
Please pm me if you want to work together, I saw your kernel is from ICX team? I know nick very well so I'd would be a pleasure to work with you too
sminki said:
yes it boots!
(maybe you can help with my Question here )
Click to expand...
Click to collapse
for this question and any other other question similar to this
head here
http://forum.xda-developers.com/showthread.php?t=1659584
it has menu driven process to extract and repack kernel.elf (ramdisk also can be extracted and packed )
Welcome Champ, good to see you mate.
I will leave the thread here as knowing you, you will have a kernel ready for us in a few hours.:fingers-crossed:
thanks for the test guys... so now i'm diving into including recovery....
good to know i could pull off kernel.elf editing in my first attempt lol
@colossus if not in hours, then definitely within 1 or 2 days
EDIT :
can someone send me the kernel.elf from FXP122 cm9 ??
will save me the time to download the whole ROM
This is sweet, good job!!
john9 said:
This is sweet, good job!!
Click to expand...
Click to collapse
Only a few files to edit now
We'll keep you updated
Sent from my LT26i using XDA
championswimmer said:
btw if anyone wishes to do this before me,
this diffstats should help you
https://github.com/championswimmer/xps-ramdisk/commit/a61969aefca00ce3a6e4e112e97403fb6f0c79e9
it shows how doomlord added recovery to gb kernel..
Click to expand...
Click to collapse
cool.. well that's a hell of a lot easier than the manual route I was taking. This was my goal, but for personal rather than pseudo "xda glory" as I'm working with DooM's stuff I didn't feel right posting it without his permission, but he's probably too busy to care
go for it championswimmer :victory:
Excuse my noob-ish question, but... what's the difference between a 'stock' kernel with recovery and a completely custom kernel like DoomLord's? Is it to do with core frequencies/governors?
fNOOB said:
Excuse my noob-ish question, but... what's the difference between a 'stock' kernel with recovery and a completely custom kernel like DoomLord's? Is it to do with core frequencies/governors?
Click to expand...
Click to collapse
Frequencies and governors are one possible customicing for kernels, for the most users the most important thing. also Kernel modifing can allows you init.d support, undervoltscripts and also allows (or denies) MSC support... and, for shure, clean out some tings, make things more efficiently and and and... a dev is nearly totaly free to create a very customiced kernel with or without special Driver support or so
noob.fl said:
Frequencies and governors are one possible customicing for kernels, for the most users the most important thing. also Kernel modifing can allows you init.d support, undervoltscripts and also allows (or denies) MSC support... and, for shure, clean out some tings, make things more efficiently and and and... a dev is nearly totaly free to create a very customiced kernel with or without special Driver support or so
Click to expand...
Click to collapse
Cheers mate
sminki said:
cool.. well that's a hell of a lot easier than the manual route I was taking. This was my goal, but for personal rather than pseudo "xda glory" as I'm working with DooM's stuff I didn't feel right posting it without his permission, but he's probably too busy to care
go for it championswimmer :victory:
Click to expand...
Click to collapse
using someone's work just because 'he's too busy to care' is not the aim which we at xda strive for ...
i've already talked with Doomlord regarding using his recovery... and as long as I clearly mention it's his work and provide links back to his thread, he has no issues with anyone else using it...
(and i'll surely do that ^^ when i release a kernel containing his recovery, if i ever do that)
championswimmer said:
using someone's work just because 'he's too busy to care' is not the aim which we at xda strive for ...
i've already talked with Doomlord regarding using his recovery... and as long as I clearly mention it's his work and provide links back to his thread, he has no issues with anyone else using it...
(and i'll surely do that ^^ when i release a kernel containing his recovery, if i ever do that)
Click to expand...
Click to collapse
cool, i was only making a bad joke, we all know DooM cares
sminki said:
cool, i was only making a bad joke, we all know DooM cares
Click to expand...
Click to collapse
lol.. ok
and i'll bring you some unicorns soon
championswimmer said:
lol.. ok
and i'll bring you some unicorns soon
Click to expand...
Click to collapse
I can't wait! :victory:
so this kernel has the ro.secure property in default.prop set to 0??
Tnaks mate for your job!
tested right now the test version and the sony logo fades and reboots
can you plug it into a pc and run a logcat from command prompt and give me the output of any comes??
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Sony Xperia Z1 (honami)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
Big credits to @DooMLoRD for his help to rebase on stock kernel
XDA:DevDB Information
[honami][CWM Advanced Edition] PhilZ Touch, a Tool/Utility for the Sony Xperia Z1
Contributors
Phil3759, DooMLoRD, [NUT]
Version Information
Status: Testing
Created 2014-03-29
Last Updated 2014-03-29
hello and thank you.
I have found the file. img I can not find my method for installing or flashed to the files on my Z1.
sorry i use google translation I'm French
Français
bonjour et merci . j'ai bien trouvé le fichier .img mes je ne trouve pas la méthode pour l installer ni pour flashé le fichiers sur mon Z1
Bien cordialement
Xque_31
Envoyé de mon C6903 en utilisant Tapatalk
Phil3759 said:
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Click to expand...
Click to collapse
hi @Phil3759,
firstly welcome to the Z1 forums!
the kernel image you posted will not boot on any device as it misses the crucial device tree files... here are detailed instructions on how to build bootable kernels for many Xperia device since 2011:
http://forum.xda-developers.com/showthread.php?t=2447310
I have fixed this by integrating the ramdisk with stock FW 290 (android 4.3) so that people can test out this recovery..
download link for fixed image is:
http://d-h.st/Iz2
BTW me and my colleague @Napstar have worked on similar "Advanced recovery" before (it was released some time in late 2011/early 2012):
our sources have also been released quite some time back:
http://forum.xda-developers.com/showthread.php?t=1485829
but i discontinued work on it as i got busy with personal work
I would recommend getting in touch with @Napstar, may be we can collaborate for some bigger things
also another thing... since I have worked on multi-recoveries in my kernels, i had 4 recoveries in my X10 kernel way back in septmber 2011!!, and since you are actively developing this advanced recovery, do i have your permission to integrate this recovery in my DooMKernel? (I have made my DooMKernel for close to 21 devices from various vendors Sony, HTC, Samsung, Huawei, Kindle, etc; currently I actively support only 4 devices though: Xperia Z1, Z, SP & T)
note to users:
if you want to test out this recovery then you need to HOTBOOT this kernel:
Code:
fastboot boot kernel.img
regards,
DooMLoRD
DooMLoRD said:
hi @Phil3759,
firstly welcome to the Z1 forums!
the kernel image you posted will not boot on any device as it misses the crucial device tree files... here are detailed instructions on how to build bootable kernels for many Xperia device since 2011:
http://forum.xda-developers.com/showthread.php?t=2447310
I have fixed this by integrating the ramdisk with stock FW 290 (android 4.3) so that people can test out this recovery..
download link for fixed image is:
http://d-h.st/Iz2
BTW me and my colleague @Napstar have worked on similar "Advanced recovery" before (it was released some time in late 2011/early 2012):
our sources have also been released quite some time back:
http://forum.xda-developers.com/showthread.php?t=1485829
but i discontinued work on it as i got busy with personal work
I would recommend getting in touch with @Napstar, may be we can collaborate for some bigger things
also another thing... since I have worked on multi-recoveries in my kernels, i had 4 recoveries in my X10 kernel way back in septmber 2011!!, and since you are actively developing this advanced recovery, do i have your permission to integrate this recovery in my DooMKernel?
note to users:
if you want to test out this recovery then you need to HOTBOOT this kernel:
Code:
fastboot boot kernel.img
regards,
DooMLoRD
Click to expand...
Click to collapse
Many thanks for your support
Yes, I looked at your amazing work. TWRP-ifying CWM is just amazing
However, the codes we use diverge too much, but yes, why not, collaboration can be always welcome. It just take a big effort to start so that each one familiarizes with other's code
Obviously you can use and repack any of my files to your wish
I also should added a note that this is a sample for devs to use it at their wish, like I do for Xperia Z. I knew well that it won't boot any stock ROM. Thought it would boot cm-11.0 roms though...
Anything I have to do when compiling to make it at least boot cm-11.0?
If you agree, I will add your recovery.img to goo.im instead of actual one + add full credits in OP
Phil3759 said:
Many thanks for your support
Yes, I looked at your amazing work. TWRP-ifying CWM is just amazing
However, the codes we use diverge too much, but yes, why not, collaboration can be always welcome. It just take a big effort to start so that each one familiarizes with other's code
Obviously you can use and repack any of my files to your wish
I also should added a note that this is a sample for devs to use it at their wish, like I do for Xperia Z. I knew well that it won't boot any stock ROM. Thought it would boot cm-11.0 roms though...
Anything I have to do when compiling to make it at least boot cm-11.0?
If you agree, I will add your recovery.img to goo.im instead of actual one + add full credits in OP
Click to expand...
Click to collapse
well @Napstar is currently working on something new please get in touch with him, he is busy with his PhD work but I am sure he can find out some time
it wont even boot on any Z1 irrespective of ROM... actually the kernel formats for Sony devices vary A LOT! they are not using standard boot.img format... and anyways especially for the msm8974 board (and beyond) the new device tree format will be used... its a bit tricky to explain but Krab has a good tutorial here:
http://forum.xda-developers.com/showthread.php?t=2469421
sure go ahead... u can link the recovery.img where ever u want i just repacked ur ramdisk with the correct zImage & dt.img
Phil3759 said:
Many thanks for your support
Yes, I looked at your amazing work. TWRP-ifying CWM is just amazing
However, the codes we use diverge too much, but yes, why not, collaboration can be always welcome. It just take a big effort to start so that each one familiarizes with other's code
Obviously you can use and repack any of my files to your wish
I also should added a note that this is a sample for devs to use it at their wish, like I do for Xperia Z. I knew well that it won't boot any stock ROM. Thought it would boot cm-11.0 roms though...
Anything I have to do when compiling to make it at least boot cm-11.0?
If you agree, I will add your recovery.img to goo.im instead of actual one + add full credits in OP
Click to expand...
Click to collapse
here is a bonus for you...
build tools for honami...
http://d-h.st/Vk3
just extract the archive, replace the ramdisk.cpio.gz with new compressed ramdisk and run makeit.sh
that should build a bootable boot.img for Z1 (honami)
DooMLoRD said:
here is a bonus for you...
build tools for honami...
http://d-h.st/Vk3
just extract the archive, replace the ramdisk.cpio.gz with new compressed ramdisk and run makeit.sh
that should build a bootable boot.img for Z1 (honami)
Click to expand...
Click to collapse
That's a lot
I will take a look at it or maybe just provide recovery.zip installer so that interested devs can repack, or even the ramdisk
Huge thanks
I will get in touch with Napster :good:
DooMLoRD said:
here is a bonus for you...
build tools for honami...
http://d-h.st/Vk3
just extract the archive, replace the ramdisk.cpio.gz with new compressed ramdisk and run makeit.sh
that should build a bootable boot.img for Z1 (honami)
Click to expand...
Click to collapse
I took a look at your script
I was aware of the dt.img and already use it for Note 3 and Note 10.1 2014 from Samsung and on many of the new LG devices
Actually, cm-11.0 build tree is fixed to use a custom bootimg make file:
https://github.com/CyanogenMod/android_device_sony_rhine-common/blob/cm-11.0/custombootimg.mk#L56
The dt.img is kernel specific and is built along the zImage as you surely know. When compiling cm-11.0 boot.img, the zImage and matching dt.img are compiled and repacked using custombootimg.mk
Unpacking your fixed recovery.img I see the only changes are the dt.img and zImage to be able to use with stock ROMs. That's great and most people would prefer it that way
However, I am still unsure why you say that my original release won't boot a cm-11.0 ROM? Is it mandatory to have the kernel built along the ROM ? I do not think else your repack with zImage would work only on one specific ROM
Hope you can enlighten me on that
Phil3759 said:
I took a look at your script
I was aware of the dt.img and already use it for Note 3 and Note 10.1 2014 from Samsung and on many of the new LG devices
Actually, cm-11.0 build tree is fixed to use a custom bootimg make file:
https://github.com/CyanogenMod/android_device_sony_rhine-common/blob/cm-11.0/custombootimg.mk#L56
The dt.img is kernel specific and is built along the zImage as you surely know. When compiling cm-11.0 boot.img, the zImage and matching dt.img are compiled and repacked using custombootimg.mk
Unpacking your fixed recovery.img I see the only changes are the dt.img and zImage to be able to use with stock ROMs. That's great and most people would prefer it that way
However, I am still unsure why you say that my original release won't boot a cm-11.0 ROM? Is it mandatory to have the kernel built along the ROM ? I do not think else your repack with zImage would work only on one specific ROM
Hope you can enlighten me on that
Click to expand...
Click to collapse
the original boot.img didnt have a dt.img
DooMLoRD said:
the original boot.img didnt have a dt.img
Click to expand...
Click to collapse
really wired as I used the device tree with custom bootimg make file I linked above
I will look at it and thank you for your repack. I added to main goo.im repo
Afternoon chaps,
Just wanted to give this a whirl as i've used your recoveries before, so out of the two which are on the download section, which one should work on 4.2.2, with a locked bootloader?
Cheers m8 an glad you've made it onto the Z1
@Phil3759
For some reason on locked bootloader devices, while the texfat module has been loaded, I'm unable to get philz touch to mount any exFAT sdcard unless I change the extra.fstab line for it from 'auto' to 'texfat' ... any way to get this working normal again?
[NUT] said:
@Phil3759
For some reason on locked bootloader devices, while the texfat module has been loaded, I'm unable to get philz touch to mount any exFAT sdcard unless I change the extra.fstab line for it from 'auto' to 'texfat' ... any way to get this working normal again?
Click to expand...
Click to collapse
The honami version is compiled without minivold support for exfat modules. It will only work with fuse
https://github.com/PhilZ-cwm6/philz_touch_cwm6/blob/cm-11.0/boardconfig/BoardConfig.mk#L520
You can try to use the yuga minivold binary instead. If it is ok and you want to add support it officially with updates, I will do like yuga and enable the exfat flag
hey I have the Xperia T & SP can you create a touch version for them too?
i can be your guinea pig for testing
SP: https://github.com/CyanogenMod/android_device_sony_huashan
T: https://github.com/CyanogenMod/android_device_sony_mint
DooMLoRD said:
hey I have the Xperia T & SP can you create a touch version for them too?
i can be your guinea pig for testing
SP: https://github.com/CyanogenMod/android_device_sony_huashan
T: https://github.com/CyanogenMod/android_device_sony_mint
Click to expand...
Click to collapse
Compiled and opened dedicated threads
Feel free to put your magic if needed :angel:
@Phil3759: The backlight is really very dim on locked bootloader devices... setting that to the max setting doesn't change it all that much either.
Anything I can do to test if it's philz touch causing this?
[NUT] said:
@Phil3759: The backlight is really very dim on locked bootloader devices... setting that to the max setting doesn't change it all that much either.
Anything I can do to test if it's philz touch causing this?
Click to expand...
Click to collapse
I use this path:
Code:
/sys/class/leds/wled:backlight/brightness
Since the repack was done using a stock kernel, not sure if it still matches!
Phil3759 said:
I use this path:
Code:
/sys/class/leds/wled:backlight/brightness
Since the repack was done using a stock kernel, not sure if it still matches!
Click to expand...
Click to collapse
It does still match. It's like the value to it got cut in half...
[NUT] said:
It does still match. It's like the value to it got cut in half...
Click to expand...
Click to collapse
try to set brightness in recovery gui, then:
Code:
adb shell
cat "/sys/class/leds/wled:backlight/brightness"
Post the value here, maybe you're getting some crap because I did not properly escape those ":"
No idea why Sony have such genius ideas in naming their paths
Phil3759 said:
try to set brightness in recovery gui, then:
Code:
adb shell
cat "/sys/class/leds/wled:backlight/brightness"
Post the value here, maybe you're getting some crap because I did not properly escape those ":"
No idea why Sony have such genius ideas in naming their paths
Click to expand...
Click to collapse
Busy with making a system dump on my Z1 now, will do that soon though.
---------- Post added at 12:55 AM ---------- Previous post was at 12:36 AM ----------
Phil3759 said:
try to set brightness in recovery gui, then:
Code:
adb shell
cat "/sys/class/leds/wled:backlight/brightness"
Post the value here, maybe you're getting some crap because I did not properly escape those ":"
No idea why Sony have such genius ideas in naming their paths
Click to expand...
Click to collapse
[NUT] said:
Busy with making a system dump on my Z1 now, will do that soon though.
Click to expand...
Click to collapse
Done that:
Code:
~ # cat "/sys/class/leds/wled:backlight/brightness"
10
~ # cat "/sys/class/leds/wled:backlight/brightness"
255
First one is from the screen/power save mode, the second is when fully lit... but still the screen is only half as bright or maybe even less then half compared to using the XZ philz ...
This is an unofficial compiled from Xperia Z1 CoCore-Z Kernel sources. I like to share with you my modified version of CoCore-Z kernel r27. I'd like to credit @cocafe it wouldn't be possible without you. I'm not a developer so I cannot answer your question about any bugs for this kernel immediately.
If the kernel crashed (freezed and rebooted), please fetch last_kmsg file after the crash reboot and post in the thread. I will ask cocafe how to resolve bugs.
Code:
su -c cat /proc/last_kmsg > /sdcard/last_kmsg
2015/04/01
please visit http://forum.xda-developers.com/showpost.php?p=59827552&postcount=8 to see more information:
Changelog:
1.Compiled using Linaro GCC 4.9.3 2015.03 toolchain with Cortex-A15 optimizations
2.Ramdisk adjusted for the Z1C
3.Updated PhilZ Touch recovery v6.59.0 & CWM v6.0.5.0 & TWRP v2.8.5.0
Requirements:
1. Unlocked Bootloader
2. Stock Sony KK firmware .757/.108/.157 or any ROM based on it.
Features:
Visit the CoCore-Z Original thread in the Z1 forum, and make sure you read all the instructions and features.
http://forum.xda-developers.com/xperia-z1/orig-development/kernel-cocore-z-r12-t2892310
Download Links:
https://mega.co.nz/#F!ysRWkCQY!Hb9wssFCCpc9fCEhI4zFQQ
Kernel Source:
https://github.com/cocafe/c6902_kernel_CoCore-Z
Credits:
cocafe (for his kernel sources and letting me build this unofficial release)
[NUT] (for all recoveries & 14.4.A.0.157 kernel ramdisk & NDRUtils)
OmarEinea (for his great script of build tools letting me easy way to compile kernel)
Christopher83 (for Linaro cross compiler toolchains)
And for everyone who had a hand in making this kernel better
sharonliu said:
This is an unofficial compiled from Xperia Z1 CoCore-Z Kernel sources. I like to share with you my modified version of CoCore-Z kernel r25. I'd like to credit @cocafe it wouldn't be possible without you. I'm not a developer so I cannot answer your question about any bugs for this kernel immediately.
If the kernel crashed (freezed and rebooted), please fetch last_kmsg file after the crash reboot and post in the thread. I will ask cocafe how to resolve bugs.
Code:
su -c cat /proc/last_kmsg > /sdcard/last_kmsg
Changelog:
1.Compiled using Linaro GCC 4.9.3 2015.03 toolchain with Cortex-A15 optimizations
2.Ramdisk adjusted for the Z1C
3.Updated PhilZ Touch recovery v6.59.0 & CWM v6.0.5.0 & TWRP v2.8.5.0
Requirements:
1. Unlocked Bootloader
2. Stock Sony KK firmware .757/.108 or any ROM based on it
Features:
Visit the CoCore-Z Original thread in the Z1 forum, and make sure you read all the instructions and features.
http://forum.xda-developers.com/xperia-z1/orig-development/kernel-cocore-z-r12-t2892310
Download Links:
https://mega.co.nz/#F!ysRWkCQY!Hb9wssFCCpc9fCEhI4zFQQ
Kernel Source:
https://github.com/cocafe/c6902_kernel_CoCore-Z
Credits:
cocafe (for his kernel sources and letting me build this unofficial release)
[NUT] (for all recoveries & 14.4.A.0.157 kernel ramdisk & NDRUtils)
OmarEinea (for his great script of build tools letting me easy way to compile kernel)
Christopher83 (for Linaro cross compiler toolchains)
And for everyone who had a hand in making this kernel better
Click to expand...
Click to collapse
cocafe mentioned that the wifi modules has to be original from stock ROM, so i replaced them before flashing the kernel, but wifi does not turn on.
thank you for reporting this problem, it should be resolved next release.
Nice to see another stock based kernel around!
Only .108 or also .157?
Schlengge said:
Nice to see another stock based kernel around!
Only .108 or also .157?
Click to expand...
Click to collapse
from cocafe´s post:
ROM: Stock KitKat 4.4.4 14.4.A.0.108 +
Click to expand...
Click to collapse
so imho for .157 too
sharonliu said:
thank you for reporting this problem, it should be resolved next release.
Click to expand...
Click to collapse
i think this solves the problem: LINK
moonryder said:
i think this solves the problem: LINK
Click to expand...
Click to collapse
Thanks for the information. Just like DooMKernel, my goal is no need to compile wlan module. If I am not luck, I will build the wlan module in this weekend.
Changelog :
wlan is working
Download Links:
https://mega.co.nz/#F!ysRWkCQY!Hb9wssFCCpc9fCEhI4zFQQ
Insturaction:
If you want back to stock kernel, remember reboot to recovery and flash stock wife modules.
sharonliu said:
...flash stock wife modules.
Click to expand...
Click to collapse
funny...
btw will check this kernel
checked your stock wlan zip file, there is something wrong.
the wlan file is wrong named (the right name is pronto_wlan) and would be flashed into /system/lib/modules
but it has to be flashed into /system/lib/modules/pronto
p.s. i replaced all files in the zip with the original from my ROM
moonryder said:
funny...
btw will check this kernel
checked your stock wlan zip file, there is something wrong.
the wlan file is wrong named (the right name is pronto_wlan) and would be flashed into /system/lib/modules
but it has to be flashed into /system/lib/modules/pronto
p.s. i replaced all files in the zip with the original from my ROM
Click to expand...
Click to collapse
In CoCore-Z-r27-wlan-modul, pronto_wlan is not included in the zip file, only customize prima's wlan.ko. So my stock wlan zip file, no need to re-flash pronto_wlan. cocafe will try to port new pronto_wlan in the next time.
sharonliu said:
In CoCore-Z-r27-wlan-modul, pronto_wlan is not included in the zip file, only customize prima's wlan.ko. So my stock wlan zip file, no need to re-flash pronto_wlan. cocafe will try to port new pronto_wlan in the next time.
Click to expand...
Click to collapse
ok
btw flashed new build from today and wifi works like a charm.
thx
Thanks for this kernel
The only thing I noticed is that the notification light turns white when the battery is full
Normal it's green
Don't know if it's I bug but I noticed it
It's not a bug. Cocafe made it so the led will notify you of the real eoc. You can change the led color though here I believe "/sys/kernel/qpnp-charger/eoc_led"
i tried some scripts from cocafes original post HERE.
But none of the scripts work using SManager. Why?
always error: "No such file or directory ...."
but these files / directories are there (checked it with RootExporer) -DAMN
And if the scripts don´t work, there is no profit compared to DoomKernel...
moonryder said:
i tried some scripts from cocafes original post HERE.
But none of the scripts work using SManager. Why?
always error: "No such file or directory ...."
but these files / directories are there (checked it with RootExporer) -DAMN
And if the scripts don´t work, there is no profit compared to DoomKernel...
Click to expand...
Click to collapse
get terminal emulator from the play store and type it in there
or use adb shell
adb shell
su
Click to expand...
Click to collapse
it should work if you type these scripts. In my opinion, DoomKernel is the best custom kernel, bu nice to see another stock based kernel around.
sharonliu said:
...DoomKernel is the best custom kernel....
Click to expand...
Click to collapse
you are so right bro
I found this kernel seems not to support exFAT. May you fix that?
btw, thx for modifying this kernel for Z1C. It's amazing !!
a1b2c3901 said:
I found this kernel seems not to support exFAT. May you fix that?
btw, thx for modifying this kernel for Z1C. It's amazing !!
Click to expand...
Click to collapse
why do you use exFAT format?
Do you have files > 4GB in use?
moonryder said:
why do you use exFAT format?
Do you have files > 4GB in use?
Click to expand...
Click to collapse
Sometimes I will watch movie in the journeys, and that files may be oversize.
a1b2c3901 said:
Sometimes I will watch movie in the journeys, and that files may be oversize.
Click to expand...
Click to collapse
get "MLUSB Mounter" from the play store, you can use the USB hard drive (formatted NTFS, exFAT).
Due to several reasons I have stopped the deployment of the "monthly Update.Zip packages" !
Thanks for your understanding.
This thread will be used for the unified tegra-3.18 kernel only.
Twelve:
tegra-3.18_unified_dragon_kernel_12_v211213.zip
Eleven:
tegra-3.18_unified_dragon_kernel_11_v201218.zip
Ten:
tegra-3.18_unified_dragon_kernel_10_v201010.zip
Pie:
tegra-3.18_unified_dragon_kernel_p_v200310.zip
Oreo:
tegra-3.18_unified_dragon_kernel_o_v200310.zip
Changes/Features:
- Upstream to kernel version 3.18.140
- Various patches and security updates
- Added Wireguard support
- Added/Enabled various file systems (exFat, NTFS, Network Filesystems .. etc.)
- Changed kernel config to enable/improve support for varioius services (tethering .. etc.)
- Added "fix cpu frequency limitation"
- etc.
Installation:
1. Boot into TWRP
2. Install the Kernel Update.Zip file
3. Reboot into system .. no need for SuperSU / Magisk !
The package contains an Image.fit kernel binary only - and no ramdisk part !
This way the kernel should run on all available Android Oreo/Pie/Ten ROMs for the dragon device.
And there is no need for a new SuperSu/Magisk installation afterwards, unlike to "full boot.img" installation.
Sources:
https://github.com/followmsi/android_kernel_tegra
https://github.com/followmsi/lazyflasher/tree/followmsi-dragon
https://github.com/followmsi/AnyKernel2/tree/dragon
Download:
https://drive.google.com/drive/folders/18cqluw7lp1S720QdV0p-OtHfY9MNpSwn
Big thanks to @NYCHitman1 (Dirty Unicorn), @cheep5k8 (xceed), @Vartom and updateing from Team Mokee for the nice kernel sources !
Big thanks to @osm0sis (Anykernel2) and @jcadduono (lazyflasher) for the nice tools !
Enjoy
flashed your system image
devices does not boot
flashed back to stock
boots
edit: further details
every boot just dumps me into recovery.
dmitrygr said:
flashed your system image
devices does not boot
flashed back to stock
boots
edit: further details
every boot just dumps me into recovery.
Click to expand...
Click to collapse
Thanks for feedback .. no good news.
Sorry, I can not reproduce your problem.
Tested the system_vendor udapte.zip several times on my Pixel C.
No problem so far ...
You flashed the complete .zip via TWRP ?
What was your previous firmware level ?
Did you upgrade bootloader as well ?
What kernel do you have in use ?
EDIT:
Which Version of TWRP ?
Pls use xceed version for now.
The NYChitman1 version seems to have problems.
http://forum.xda-developers.com/pix...ock-bootloader-install-custom-t3307183/page14
followmsi said:
The NYChitman1 version seems to have problems.
http://forum.xda-developers.com/pix...ock-bootloader-install-custom-t3307183/page14
Click to expand...
Click to collapse
Only the latest one I released because I didn't put the proper flag in place -- the previous one works perfectly fine as indicated by myself and others.
Also, I find it interesting that you've created a development thread while you aren't actually developing anything.
Thanks for the update.
Still like to test your version.
Ok, the version from here is recommended .. http://forum.xda-developers.com/showpost.php?p=66557703&postcount=101
In the one from yesterday you fixed vendor image flashing via TWRP.. sounds nice.
When do you re-release this version ?
You may open a new thread for your TWRP releases ..
Thanks a lot for all your work!
New kernel released ... pls test
Update.ZIP_Nexus_Ryu_chromeos-3.18-kernel_v160519_followmsi.zip
There are lot of changes in compare to latest stock kernel .. https://chromium.googlesource.com/chromiumos/third_party/kernel/+log/chromeos-3.18/
Cheers
followmsi said:
New kernel released ... pls test
Update.ZIP_Nexus_Ryu_chromeos-3.18-kernel_v160519_followmsi.zip
There are lot of changes in compare to latest stock kernel .. https://chromium.googlesource.com/chromiumos/third_party/kernel/+log/chromeos-3.18/
Cheers
Click to expand...
Click to collapse
Many thanks for your work The kernel is for stock / AOSP roms? Running Dirty Unicorns and I think it´s not compatible :/
redukt said:
Many thanks for your work The kernel is for stock / AOSP roms? Running Dirty Unicorns and I think it´s not compatible :/
Click to expand...
Click to collapse
There are so many fixes since MXC89F kernel .. which was commited on Arpil 5th .. even it's the May release. Ok, was tagged on May, 4th.
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/MXC89F
Last changes .. 6 weeks ..
https://chromium.googlesource.com/c...+log/9c052efad6e651d33334b84c8f1feaf8945e8e7a
I am running the new kernel on latest M stock release .. MXC89F.
No problems so far .. really stable.
The kernel should run on all stock M releases for PixelC.
Used latest stock ramdisk to build the kernel .. maybe the dirty unicorn ramdisk is different.
But the actual kernel should work as well ..it's a dragon kernel.
Repack DU ramdisk with my kernel and it will most probably work as well .. maybe even with the same ramdisk, without repacking. Needs to be tested ..
Give it a try .. it will not hurt.
Cheers
Any chance of getting a port of multirom? Let me know if there's any interest, and what I can do to help.
nic. said:
Any chance of getting a port of multirom? Let me know if there's any interest, and what I can do to help.
Click to expand...
Click to collapse
Sounds good .. have it running on Nexus 7 flo .. really like it.
MultiROM for PixelC would be really nice .. the chromeos is part is maybe tricky.
But like SuperSU .. automatic chromeos image unpack and repack, if required at all.
It seems Tassadar is not around anymore .. not sure if he will come back.
Some new guys have taken over .. they just made a new update release for TWRP and MultiROM..
Works fine
Are you able to port it to Pixel C ?
Thanks
followmsi said:
Give it a try .. it will not hurt.
Cheers
Click to expand...
Click to collapse
Bootloop
Restored my Nandroid and device is up
DU is CM based and unfortunately incompatible :/
followmsi said:
Sounds good .. have it running on Nexus 7 flo .. really like it.
MultiROM for PixelC would be really nice .. the chromeos is part is maybe tricky.
But like SuperSU .. automatic chromeos image unpack and repack, if required at all.
It seems Tassadar is not around anymore .. not sure if he will come back.
Some new guys have taken over .. they just made a new update release for TWRP and MultiROM..
Works fine
Are you able to port it to Pixel C ?
Thanks
Click to expand...
Click to collapse
I am wanting to dig into the Linux4Tegra side of this, and was hoping that some of the work for multirom could or had been done. I don't know anything about the chromeos bootloader. Looking into it, Chrubuntu might be a viable path for this. I feel like this device is gimped with Android.
redukt said:
Bootloop
Restored my Nandroid and device is up
DU is CM based and unfortunately incompatible :/
Click to expand...
Click to collapse
Thanks for the test ..
Restore DU boot.img and you are back to normal ..yep
I will unpack the DU boot.img and have short look .. just to check it.
nic. said:
I am wanting to dig into the Linux4Tegra side of this, and was hoping that some of the work for multirom could or had been done. I don't know anything about the chromeos bootloader. Looking into it, Chrubuntu might be a viable path for this. I feel like this device is gimped with Android.
Click to expand...
Click to collapse
Sounds like a lot of work .. but if you have the right people involved ..
Maybe xceed or nychitman will know better how to "manage" the bootloader ..
As I know, until today, "nobody" knows how to remove the 30 second warning time beep sound ****.
Right now I am happy to "manage" the layer above .. boot.img and recovery.img
redukt said:
DU is CM based and unfortunately incompatible :/
Click to expand...
Click to collapse
What are you talking about? We're not CM based.
followmsi said:
There are so many fixes since MXC89F kernel .. which was commited on Arpil 5th .. even it's the May release. Ok, was tagged on May, 4th.
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/MXC89F
Last changes .. 6 weeks ..
https://chromium.googlesource.com/c...+log/9c052efad6e651d33334b84c8f1feaf8945e8e7a
I am running the new kernel on latest M stock release .. MXC89F.
No problems so far .. really stable.
The kernel should run on all stock M releases for PixelC.
Used latest stock ramdisk to build the kernel .. maybe the dirty unicorn ramdisk is different.
But the actual kernel should work as well ..it's a dragon kernel.
Repack DU ramdisk with my kernel and it will most probably work as well .. maybe even with the same ramdisk, without repacking. Needs to be tested ..
Give it a try .. it will not hurt.
Cheers
Click to expand...
Click to collapse
I had been keeping up with the chromeos-3.18 branch upstream, but I realized that a majority of the commits do not even apply to Dragon -- so it wasn't all that worthwhile to have in the majority of cases. With that said, I decided to go back to the MXC89F source until the next batch of source is released in June.
NYCHitman1 said:
What are you talking about? We're not CM based.
Click to expand...
Click to collapse
Well my bad...DU is AOSP based. I get mixed up with all several custom roms on my devices :silly:
NYCHitman1 said:
What are you talking about? We're not CM based.
I had been keeping up with the chromeos-3.18 branch upstream, but I realized that a majority of the commits do not even apply to Dragon -- so it wasn't all that worthwhile to have in the majority of cases. With that said, I decided to go back to the MXC89F source until the next batch of source is released in June.
Click to expand...
Click to collapse
You are right .. there also many fixed not relevant for dragon at all.
But it´s a fresh kernel .. upstream
I was so free .. and made a new DU kernel now .. used your ramdisk and my fresh chomeos-3.18 build from today.
@redukt, please test this kernel again .. on DU
Update.ZIP_PixelC_Ryu_chromeos-3.18-kernel_DU_v160519_followmsi.zip
https://onedrive.live.com/?authkey=!ABLdSOKIeXgg_XU&id=479EB75F5DD9DA59!117&cid=479EB75F5DD9DA59
Thanks .. still bootloop ?
redukt said:
Well my bad...DU is AOSP based. I get mixed up with all several custom roms on my devices :silly:
Click to expand...
Click to collapse
Please test this one ... Update.ZIP_PixelC_Ryu_chromeos-3.18-kernel_DU_v160519_followmsi.zip
https://onedrive.live.com/?authkey=!ABLdSOKIeXgg_XU&id=479EB75F5DD9DA59!117&cid=479EB75F5DD9DA59
Thanks !
followmsi said:
Please test this one ... Update.ZIP_PixelC_Ryu_chromeos-3.18-kernel_DU_v160519_followmsi.zip
https://onedrive.live.com/?authkey=!ABLdSOKIeXgg_XU&id=479EB75F5DD9DA59!117&cid=479EB75F5DD9DA59
Thanks !
Click to expand...
Click to collapse
!!! Device is booting!!!
Meh... forget to install SU lol.... Will have a look in kernel auditor
Many thanks
edit: I have to flash the latest supersu (beta v2.74-2) to get root again. Will test your kernel til the next DU weeklie as dd. I´ll have a look at the frequency overview and kept stock settings / governor. System runs fluid with no hickups or so. Great work!
Looks also very interessting ..stabilize-smaug-7897.B-chromeos-3.18
https://chromium.googlesource.com/c...kernel/+/stabilize-smaug-7897.B-chromeos-3.18
Will see .. today they released the 3rd N preview ... maybe it´s time for some N testing.
As I understand correct .. using N ramdisk and the same kernel from today should work on N as well.
We will see ...
Cheers
Hi all !
After many years of "xda looting", i'm trying to contribute a little.
I'm a begginer, just learned 3 days ago how to use github ! So be cool guys, not a dev here.
Now i successfully compiled a Kernel, with addition of KCAL for now, but...
I got the Image.gz-dtb and i don't succeed in repacking it in a boot.img, if someone want to try, be my guest. (It's untested obviously, but compilation was without errors/warnings (we are close to stock for now.).
I tried mkboot, anykernel2, lazyflasher.... Always flash error, and i don't have time for the next few days, so if we could put a team together...
Here is the link to my compiled files (arch/arm64/boot) except dto folder. //Update to my Dev folder
Theorically you just have to rename, put it in a stock boot.img, "fastboot boot newboot.img" and test if Kcal is working with ex kernel manager, then more to come (governors, maybe OC, etc.)
Poke @d1ngh, you could help here after your work on twrp ?
Cheers guys, we could have our first custom kernel soon !
----------------------------------------
Source : [url]https://github.com/WiwiWillou/Xiaomi_Kernel_OpenSource.git[/URL]
Defconfig used = defconfig daisy-perf_defconfig (with the kcal=Y addition not commited for now) // branch daisy-o-oss
Thank you very much! That´s what I waited for. Unfortunately 7zip says error: unknown compression method... Perhaps you can repack? Thx.
That is all we need ! A custom kernel thant can handle GSI !
Voodoojonny said:
Thank you very much! That´s what I waited for. Unfortunately 7zip says error: unknown compression method... Perhaps you can repack? Thx.
Click to expand...
Click to collapse
I've updated the link, you should see the uncompressed file in folder !
Or direct link : https://drive.google.com/file/d/1TvihsIa_XbtC66yaWRZ1EPY5UR6LLD5g/view?usp=drivesdk
Thanks
WiwiPouPou said:
Hi all !
After many years of "xda looting", i'm trying to contribute a little.
I'm a begginer, just learned 3 days ago how to use github ! So be cool guys, not a dev here.
Now i successfully compiled a Kernel, with addition of KCAL for now, but...
I got the Image.gz-dtb and i don't succeed in repacking it in a boot.img, if someone want to try, be my guest. (It's untested obviously, but compilation was without errors/warnings (we are close to stock for now.).
I tried mkboot, anykernel2, lazyflasher.... Always flash error, and i don't have time for the next few days, so if we could put a team together...
Here is the link to my compiled files (arch/arm64/boot) except dto folder. //Update to my Dev folder
Theorically you just have to rename, put it in a stock boot.img, "fastboot boot newboot.img" and test if Kcal is working with ex kernel manager, then more to come (governors, maybe OC, etc.)
Poke @d1ngh, you could help here after your work on twrp ?
Cheers guys, we could have our first custom kernel soon !
----------------------------------------
Source : [url]https://github.com/WiwiWillou/Xiaomi_Kernel_OpenSource.git[/URL]
Defconfig used = defconfig daisy-perf_defconfig (with the kcal=Y addition not commited for now) // branch daisy-o-oss
Click to expand...
Click to collapse
Try it with android image kitchen (you first have to get the original bootimage from vendor/factory image, unpack it, exchange your kernel and repack it). recompiled official sources (with UBERTC) and it worked fine like that.
wertus33333 said:
Try it with android image kitchen (you first have to get the original bootimage from vendor/factory image, unpack it, exchange your kernel and repack it). recompiled official sources (with UBERTC) and it worked fine like that.
Click to expand...
Click to collapse
I've tried, maybe my image is bad, strange (I originally tried my stock source too, Google 4.9 toolchain, no luck). Can you test with the one in the link please ?
I will have access to my PC only next week...
Thanks a lot for your feedback !
wertus33333 said:
Try it with android image kitchen (you first have to get the original bootimage from vendor/factory image, unpack it, exchange your kernel and repack it). recompiled official sources (with UBERTC) and it worked fine like that.
Click to expand...
Click to collapse
Could you please share your build script ? Did you use an alternate defconfig ?
Learning here
EDIT : Which UberTC did you use ?
WiwiPouPou said:
Could you please share your build script ? Did you use an alternate defconfig ?
Learning here
EDIT : Which UberTC did you use ?
Click to expand...
Click to collapse
I used the original source code with some small changes (which are now included in official source) to make it compile.
Don't mind about the toolchain for the moment, gcc4.9 is most stable.
I don't have time trying this out atm, busy compiling los 15.1 but if you share exactly how you did it, (terminal log in pastebin and most importantly the exact errors, "doesn't work" doesn't help ) me or someone else might be able to help you (and you don't have to ask next time you get the error.
If you want you can start adjusting the lineage kernel, so i could build with los kernel which could save time towards working custom roms.
I successfully repack. But phone don't boot. (9.11 ROM)
Hello , can you help me with conpiling kernel source code? I tryed a lot of time but same issues , that could find same files.
I successfully repack image of kernel that you publish, but phone don't boot , they reboot in stock kernel(if i write fastboot boot boot.img) and I trying flashing image. They dont boot.
I vary want to create collection of custom kernel's on my device. And of course becouse i vary interested in this sphere, but new this.
Can you describe how you fix issues, or your compiling go without issues.
With best regards. Please help.
artyom5613 said:
Hello , can you help me with conpiling kernel source code? I tryed a lot of time but same issues , that could find same files.
I successfully repack image of kernel that you publish, but phone don't boot , they reboot in stock kernel(if i write fastboot boot boot.img) and I trying flashing image. They dont boot.
I vary want to create collection of custom kernel's on my device. And of course becouse i vary interested in this sphere, but new this.
Can you describe how you fix issues, or your compiling go without issues.
With best regards. Please help.
Click to expand...
Click to collapse
On which roms did you test your kernel?
Voodoojonny said:
On which roms did you test your kernel?
Click to expand...
Click to collapse
8.1 stock. 9.11
I compile stock kernel , repack him , ans this work fine. Now i need help to add kcal support. Author, can you help?
artyom5613 said:
I compile stock kernel , repack him , ans this work fine. Now i need help to add kcal support. Author, can you help?
Click to expand...
Click to collapse
I will, I'm very far from my PC for a few weeks again, I've used some commits :
https://github.com/rama982/android_kernel_xiaomi_msm8953/search?q=kcal&type=Commits
Source for pie is not pushed ?
WiwiPouPou said:
I will, I'm very far from my PC for a few weeks again, I've used some commits :
https://github.com/rama982/android_kernel_xiaomi_msm8953/search?q=kcal&type=Commits
Source for pie is not pushed ?
Click to expand...
Click to collapse
Thanks! O try to add kcal with this commits.
Yea, source for pie is not pushed. Xiaomi cant fix 8.1 kernel... Stock compiled kernel issue: wifi don't work...
WiwiPouPou said:
I will, I'm very far from my PC for a few weeks again, I've used some commits :
https://github.com/rama982/android_kernel_xiaomi_msm8953/search?q=kcal&type=Commits
Source for pie is not pushed ?
Click to expand...
Click to collapse
Can you tell me what version of kernel you use whyle compile kernel? I tryed on new 9.11, but phone dont boot.
Maybe when you compile version be 9.10 or ealier.
becouse ramdisk and kernel image can conflict
I hope this can support settings for "display temperature" so that we dont need app for calibrating warmth or coolness of display
Current state:
Kernel builded.
Kcal included.
Wifi don't work , searching fix
artyom5613 said:
Current state:
Kernel builded.
Kcal included.
Wifi don't work , searching fix
Click to expand...
Click to collapse
Kcal is working ?
Strange for WiFi, module not compiled ?