hello everyone,
i recently purchased this cute phone ascend p6 its nice good design and usage but i found some issues as follows...
-how to remove vibrations on unlocking the screen?
-facebook sync contacts not working...
-volume and music volum are not that good during highest level
-wifi drops even on standby... ( wifi suddenly drops 10-15sec. den it will comeback again.same rotation even on active or screen off standby)
-firmware, i tried to check the latest firmware....
(settings>about phone>software update>online update ) and it said new version is available b118 via 9/27/2013
is it safe to download that b118? coz my current version is b107 since i bought it week ago,
and would this update fix my issues,and updating from 107-b118 via same method (settings>about phone>software update>online update) is safe? coz im afraid it would make bigger problems and issues,or might break the phone..... im a long tme user of sony xperia's and galaxy s3 and s4 i update easly with same way just wana ask if huawei ascend p6 has the same way too... tnx...
i hope some one wil help me this... thanks everyone....
B118 is Chinese version of the firmware. My suggestion is to try B125. It is the international version of firmware and there lot of your issues are fixed.
alex.79 said:
B118 is Chinese version of the firmware. My suggestion is to try B125. It is the international version of firmware and there lot of your issues are fixed.
Click to expand...
Click to collapse
but sir.... i checked the method as i mentioned above, only b118 is availble coming...
its same way how i used to update before my sony and samsung phones.
settings>about phone>software update>online
is it good way too to my new ascend p6?
shodenskie said:
but sir.... i checked the method as i mentioned above, only b118 is availble coming...
its same way how i used to update before my sony and samsung phones.
settings>about phone>software update>online
is it good way too to my new ascend p6?
Click to expand...
Click to collapse
First, there is B118 CN version and B118 International version, and yes it is safe to update your phone if you have OTA update.
Second, you can download latest leaked B125 and update your phone via local update (search the forums how to do that).
All your problems are old firmware related.
IMPORTANT. Just don't update CHINESE firmwares like B118CN because you will have big chances to brick your phone.
shodenskie said:
-how to remove vibrations on unlocking the screen?
Click to expand...
Click to collapse
The option to disable unlock vibration is not available as of yet. It will be available on EMUI 2.0 update coming end of January.
icoadigh least
this how it shows....
how can i know sir if this is a chinise version or the international one?
sorry to ask to many question im so new to this huawei p6.......
shodenskie said:
this how it shows....
how can i know sir if this is a chinise version or the international one?
sorry to ask to many question im so new to this huawei p6.......
Click to expand...
Click to collapse
its the international version, chinese one is ...C17B118 instead of C00B118
Yes OTA update is possible. The one coming through OTA would be specific to your region and not all regions get it. You can update yours that way or alternatively download the leaked B125 and do a local update.
The B118 your getting is international version (not chinese) and this was available as leak a month ago. The B125 leak is a more newer firmware.
ok sir ill try this one with my new p6...
its just like im afraid that having this way or method of updating my p6 cause me more probs and issues more than i mentioned above...
my wifi is fast and updating is so slow....
tnx sir ill try hope this will not be a prob.
Sent from my GT-I9500 using xda app-developers app
wew.... is this normal?
249mb updating from b107-b118 package,
in 8hours of updating and with my fast internet only this p6 working just to finish its update but waaaaaaahhhh
out of 249 mb.... only 152mb just fnish in 8hours... so i need more time >_<
i downloaded android 4.4 b508 (P6-U06_EMUI2.0_Android 4.4_V100R001C17B508SP02) from huawei official site , and i see this is not good it's so slowly and have many bugs , so , i wanna downgrade it to jellybean 4.2.2 b118 Return to Stock , i tried many ways but it's not work , what should i do to Return to Stock plzzzzzzzzzzzz?
sorry for the bad english language
which methods did you try?
i did a downgrade from b512 in the easiest way i know: flashed b125 boot and recovery img with adb..then i created a folder dload on the root dir on the sdcard and put the b125 update.app in it..
and at the end i made a forced update by the three buttons method..
everything worked well for me..
i don't know if it's that easy on the cn firmwares..
Gesendet von meinem P6-U06
Sorry my english is bad.
I have a Huawei Ascend Mate 7 Chinese version (MT7-TL10), has unlocked bootloader and root. But I was not able to restore stock recovery update any public rom. How to return to its original status or how to get up international rom? Thanks
Hi
Current Device details:
Model : Note 10+ 5g N976B
AP: N976BXXU1BSLA
CP: N976BXXS1ASJA
CSC: N976BOBE1BSLA
Build Date:2019-12-18
Knox Status : 0x1 (tripped)
Android Version: 10
Latest Official ROM Details:
AP: N976BXXS4CTD1
CP: N976BXXS4CTD1
CSC: N976BOBE4CTD1
Build Date: 2020-04-28
IMEI of my device is already changed before i bought the handset due to which KNOX is now tripped and i am unable to use Samsung Apps and OTA updates currently device is not rooted.
Q1: if i update to latest official ROM using ODIN. will this restore the original IMEI? i dont want the IMEI to get Restored as the current IMEI is registered with my country Telecom Authority and if it gets replaced/restored then i have to repay the tax for Original/new IMEI which is ~250 USD.
Q2: Currently the Android version installed is Android 10 but the Baseband/modem/cp version is from Android 9 and works perfect. Is it safe to update it to latest version "N976BXXS4CTD1" also can i update the ROM to latest without updating CP version and will it still works fine with latest ROM?
Q3: the installed ROM is of Region GB EVR (EE) but the Basebased/CP version is of GB BTU? will updating the CP cause any problem?
Q4: if i root my device and replace the configuration values of KNOX/Reset KNOX counter will this solve my problem of using Samsung Apps and OTA? also there is a website knoxreset.com which claims to make all Samsung Apps work with OTA updates enabled by faking KNOX script. How true is that? have any one tried it?
plz help me in answering my queries.
mohsin1122 said:
IMEI of my device is already changed before i bought the handset due to which KNOX is now tripped and i am unable to use Samsung Apps and OTA updates currently device is not rooted.
Click to expand...
Click to collapse
When you root the phone it is understood that KNOX will be tripped, warranty will be void and any apps that depend on knox will no longer work. I am not sure about the OTA update thing, but it wouldn't surprise me.. Still you can perform the updates manually with Odin.
mohsin1122 said:
Q1: if i update to latest official ROM using ODIN. will this restore the original IMEI? i dont want the IMEI to get Restored as the current IMEI is registered with my country Telecom Authority and if it gets replaced/restored then i have to repay the tax for Original/new IMEI which is ~250 USD.
Click to expand...
Click to collapse
No it will not restore the original IMEI number. While I am not sure why the IMEI number was changed if the phone was rooted, once knox is tripped it is permanently tripped on the motherboard. No method exists that will fix that, outside of replacing the motherboard with a new one.
mohsin1122 said:
Q2: Currently the Android version installed is Android 10 but the Baseband/modem/cp version is from Android 9 and works perfect. Is it safe to update it to latest version "N976BXXS4CTD1" also can i update the ROM to latest without updating CP version and will it still works fine with latest ROM?
Click to expand...
Click to collapse
I am not sure if that will work being that the baseband is from Android 9 and what your wanting to flash is something from Android 10. IMHO I wouldn't do that... Perhaps someone else may have a better idea if this is possible or not.
mohsin1122 said:
Q3: the installed ROM is of Region GB EVR (EE) but the Basebased/CP version is of GB BTU? will updating the CP cause any problem?
Click to expand...
Click to collapse
I can't answer this one because I don't live in the region your in... You will have to wait for someone who does to post for answers.
mohsin1122 said:
Q4: if i root my device and replace the configuration values of KNOX/Reset KNOX counter will this solve my problem of using Samsung Apps and OTA? also there is a website knoxreset.com which claims to make all Samsung Apps work with OTA updates enabled by faking KNOX script. How true is that? have any one tried it?
Click to expand...
Click to collapse
The answer is no.
Knox warranty bit when tripped blows an E-Fuse. It is not repairable nor is it fixable in any way what so ever unless you change the motherboard with a different one that doesn't have knox tripped.
For further information and answers to your question please read the thread below:
https://forum.xda-developers.com/galaxy-note-10+/help/knoxreset-com-legit-t4093955
mohsin1122 said:
Hi
Current Device details:
Model : Note 10+ 5g N976B
AP: N976BXXU1BSLA
CP: N976BXXS1ASJA
CSC: N976BOBE1BSLA
Build Date:2019-12-18
Knox Status : 0x1 (tripped)
Android Version: 10
Latest Official ROM Details:
AP: N976BXXS4CTD1
CP: N976BXXS4CTD1
CSC: N976BOBE4CTD1
Build Date: 2020-04-28
IMEI of my device is already changed before i bought the handset due to which KNOX is now tripped and i am unable to use Samsung Apps and OTA updates currently device is not rooted.
Q1: if i update to latest official ROM using ODIN. will this restore the original IMEI? i dont want the IMEI to get Restored as the current IMEI is registered with my country Telecom Authority and if it gets replaced/restored then i have to repay the tax for Original/new IMEI which is ~250 USD.
Q2: Currently the Android version installed is Android 10 but the Baseband/modem/cp version is from Android 9 and works perfect. Is it safe to update it to latest version "N976BXXS4CTD1" also can i update the ROM to latest without updating CP version and will it still works fine with latest ROM?
Q3: the installed ROM is of Region GB EVR (EE) but the Basebased/CP version is of GB BTU? will updating the CP cause any problem?
Q4: if i root my device and replace the configuration values of KNOX/Reset KNOX counter will this solve my problem of using Samsung Apps and OTA? also there is a website knoxreset.com which claims to make all Samsung Apps work with OTA updates enabled by faking KNOX script. How true is that? have any one tried it?
plz help me in answering my queries.
Click to expand...
Click to collapse
Brother same same.. but unfortunately mine IMEI is get replaced with original one ..
Actually its 50/50 chances... I have done alot of flashing in it .. some times it won't change but some times it changes as currently i am using it without network.. i bought & after realized when i attempted to update that it's IMEI is changed, there are some solutions for that too like chimera etc i have also talked to Samsung & shown them my purchasing receipts but they said they are unable to serve the international model etc etc...
Hi All,
I just purchased a pre-owned Mate 20X with unlocked Bootloader and it currently has EMUI build 9.0.0.207 C636. As a precaution, I always flash my devices back to original stock ROM before using them.
Does anyone know where I can download the stock ROM from a GENUINE Huawei source or OTA?
Please correct me if I'm wrong but I understand that I cannot upgrade to EMUI 9.1 or higher because I will lose my unlocked Bootloader status which I absolutely need.
Thanks!
Anyone???