[Q] I messed up my phone - Galaxy Note II Q&A, Help & Troubleshooting

Hi, everyone, I am new here and I am really in need of help...
My handset is n7100. My previous rom is AllianceROM 4.1.2. I tried to flash phoenix rom v16. After that I have a problem with external sd card space. I think that might be due to abnormally working Extsd2internalsd mod. Because I can see a folder named sdcard0.
After that, I restored to AllianceROM but the problem came up, the external sd card is always reset after I reboot my phone. Everytime I reboot my phone, my extsd card seems to be reset. That means no matter what files or folders I moved into extSD before reboot, I will lose them after reboot, what I will have on the card is always 6 folders: android, data, DCIM, LOST.DIR, Movie, and titanium backup files. All other zip files I tried to put in the card (I tried to re-flash a rom) will be lost after reboot, no matter nomal reboot or reboot into Philz recovery. It is quite strange to me and I really don't know how to do this because I cannot flash anything from external sd....I also tried format extsd and reset to factory, didnt work, I also tried to remove the mod according to thread about the mod(extsd2internalsd) and my etc/init.d folder is empty....
Any thoughts would be welcome and thank you all for helping me out

rikku1983 said:
Hi, everyone, I am new here and I am really in need of help...
My handset is n7100. My previous rom is AllianceROM 4.1.2. I tried to flash phoenix rom v16. After that I have a problem with external sd card space. I think that might be due to abnormally working Extsd2internalsd mod. Because I can see a folder named sdcard0.
After that, I restored to AllianceROM but the problem came up, the external sd card is always reset after I reboot my phone. Everytime I reboot my phone, my extsd card seems to be reset. That means no matter what files or folders I moved into extSD before reboot, I will lose them after reboot, what I will have on the card is always 6 folders: android, data, DCIM, LOST.DIR, Movie, and titanium backup files. All other zip files I tried to put in the card (I tried to re-flash a rom) will be lost after reboot, no matter nomal reboot or reboot into Philz recovery. It is quite strange to me and I really don't know how to do this because I cannot flash anything from external sd....I also tried format extsd and reset to factory, didnt work, I also tried to remove the mod according to thread about the mod(extsd2internalsd) and my etc/init.d folder is empty....
Any thoughts would be welcome and thank you all for helping me out
Click to expand...
Click to collapse
Well the first thing you should do is try a second sd card to see if the problem persists... maybe yours is somehow faulty... secondly ... are you sure you got the sd card path right? try going to the root folder through a file manager... then go into storage or sdcard...it varies...inside that folder youll see a number of storage folders...check to see if any one of them is your ext sd card folder? maybe it resets everything because it really didnt get copied...really hope it works...good luck

Related

PLEASE HELP...Can't get SD Card Swapped!!

I just got a 32GB Micro SD Card for my evo and I am trying to replace my current 8gb card. I was previously running MIUI 11.26 and using clockworkmod recovery. I followed these steps because I couldn't find anything Evo specific:
http://theunlockr.com/2009/10/15/ho...-android-when-using-swap-hero-and-or-apps2sd/
when trying to format and reapply the rom i was using i received this error msg:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory)
Now I don't know where to go from there. I previously had a 16GB card fry because apparently i didn't take the correct steps to get it working properly, i do not want that to happen again. Can ANYONE give me specific instructions for swapping my SD Card for my Evo?? If so I would GREATLY appreciate it!!!
And yes...this is probably rather "noob-ish" and I DID already search the forums for any help and couldn't find what i was looking for. Again any help is appreciated
Thanks!!
just copy all files from your 8g card to the 32g card pop it in the evn and you are good to go, nothing special required. Unless you are using apps to sd, then the easiest way s to put all apps back on the phone, then after switching to the new sd put them all back on the sd.
ifly4vamerica said:
just copy all files from your 8g card to the 32g card pop it in the evn and you are good to go, nothing special required. Unless you are using apps to sd, then the easiest way s to put all apps back on the phone, then after switching to the new sd put them all back on the sd.
Click to expand...
Click to collapse
Yea I tried that and kept getting an error msg. I think there are specific steps for partitioning etc I just don't know them.
Sent from my PC36100 using XDA App
sorry if i'm misinformed but the evo has 2.2/apps2sd built in and 2.2 partitions the sd card on reboot. The article u linked i believe is for devices with 2.1 or ealier and a modded apps2sd . I have swapped many different cards and have not had to do anything that special.
Here are my steps:
1. go into settings manage applications and pull all apps back to phone.
2. copy all files/pics/vids/whatever u want to keep to computer.
3. power off, swap out sd cards, power back on.
4. phone should boot and partition sd or whatever.
5. use astro file manager and if it shows directory for sd, asec, secure then everything is good and u can move apps back to sd.
6. hook phone to sd and move all your kept files from old sd to new sd
I have seen your problem happen with a bad sd card, where did you get the 32g card. You may want to test it and see if it is actually a 32g.
Supersonic Sent
flight01 said:
sorry if i'm misinformed but the evo has 2.2/apps2sd built in and 2.2 partitions the sd card on reboot. The article u linked i believe is for devices with 2.1 or ealier and a modded apps2sd . I have swapped many different cards and have not had to do anything that special.
Here are my steps:
1. go into settings manage applications and pull all apps back to phone.
2. copy all files/pics/vids/whatever u want to keep to computer.
3. power off, swap out sd cards, power back on.
4. phone should boot and partition sd or whatever.
5. use astro file manager and if it shows directory for sd, asec, secure then everything is good and u can move apps back to sd.
6. hook phone to sd and move all your kept files from old sd to new sd
Click to expand...
Click to collapse
Thanks for the response...just a question before i go forward with it, when i replace the card and reboot the phone, is it automatically going to boot up w/ the rom i was using before replacing the card?
Edit: Tried these steps and got stuck in bootloop for MIUI (rom i had flashed previously). Even tried to put the initial PC36IMG file on the sd card and flash it through recovery, nothing! It searched for it then says it directory cannot be found. I've put the 32gb card in my card reader on my computer and it comes up just fine, I can add files to it, format it etc and everything works, any other suggestions...this is becoming highly frustrating! Again any help is definitely welcomed!
So i still cannot seem to get this working, and I've tried doing a lot of different things and nothing is working for me, I have tried to install some sort of file manager program (astro) but it doesn't recognize my sd card, yet my phone shows it as mounted and with plenty of space available. I do not know what else to do...can ANYONE help me?
i had a similiar problem recently. For christmas I received a new sd card. At fist it didn't recognize my card. I tried to format it using my PC but I then went to my recovery (Amon RA) and clicked on the Partition SD card option.
After I partitioned, I turned on USB-MS toggle and put all my files back into the phone (including my rom zip).
I disabled USB-MS toggle, and then wiped data/factory reset, cache, dalvik-cache
Flashed zip from sdcard and violoa. It works!
try that one out.
kakashi_s1 said:
i had a similiar problem recently. For christmas I received a new sd card. At fist it didn't recognize my card. I tried to format it using my PC but I then went to my recovery (Amon RA) and clicked on the Partition SD card option.
After I partitioned, I turned on USB-MS toggle and put all my files back into the phone (including my rom zip).
I disabled USB-MS toggle, and then wiped data/factory reset, cache, dalvik-cache
Flashed zip from sdcard and violoa. It works!
try that one out.
Click to expand...
Click to collapse
I'm going to try that and see if it works, i just went back to Amon Ra today from clockwork. Thanks!
kakashi_s1 said:
i had a similiar problem recently. For christmas I received a new sd card. At fist it didn't recognize my card. I tried to format it using my PC but I then went to my recovery (Amon RA) and clicked on the Partition SD card option.
After I partitioned, I turned on USB-MS toggle and put all my files back into the phone (including my rom zip).
I disabled USB-MS toggle, and then wiped data/factory reset, cache, dalvik-cache
Flashed zip from sdcard and violoa. It works!
try that one out.
Click to expand...
Click to collapse
how would i partition a 8 GB micro sd card with AmonRA?

Safe SD format/Clockwork Update/reflash procedure?

I'm currently on CM7 which I flashed over Nightly #38. I'm liking it, but I get some reboots and stuff, so I want to do a fresh flash after wipe.
However, I'd also really like to format my SD card to clear any bad sections on it and hopefully prevent it from getting corrupt (just as a housecleaning item). I figure I also might as well update to the latest clockwork recovery at the same time.
Could someone put down some instructions on how to do these things safely, or post a link? I'm not sure if formatting the SD card will screw with Clockwork recovery, or what order I should do things in, how to do them, etc. REALLY don't want to brick my phone in trying to do the right things!
mobilemedic20 said:
I'm currently on CM7 which I flashed over Nightly #38. I'm liking it, but I get some reboots and stuff, so I want to do a fresh flash after wipe.
However, I'd also really like to format my SD card to clear any bad sections on it and hopefully prevent it from getting corrupt (just as a housecleaning item). I figure I also might as well update to the latest clockwork recovery at the same time.
Could someone put down some instructions on how to do these things safely, or post a link? I'm not sure if formatting the SD card will screw with Clockwork recovery, or what order I should do things in, how to do them, etc. REALLY don't want to brick my phone in trying to do the right things!
Click to expand...
Click to collapse
1 - Download ROM to SD Card.
2 - Copy the contents of your SD card to your computer, so you have a backup!! Very important!!
3 - Update to the latest CWM recovery.
4 - You can have your phone format your SD card, or if your computer has a SD card reader you can format it from your computer. I've done both, with no ill effects.
5 - After the format, boot up the phone and copy the SD card backup that you copied to your computer back to your SD card. Reboot into recovery, and flash the ROM you want to install.
Good luck!
EDIT: The one issue I did run into was when I formatted my new SD card with my computer. I copied my files over from my computer to my SD card, put the SD card into the phone, then booted it. The phone deleted (maybe reformatted...?) the contents of the SD card, and that is why making a back up is so important! I was able to just copy the files back over, and that issue was a one-and-done issue.
Thank you, but I should have been a little clearer in my OP...
I'd really like to just start from scratch with my SD card, i.e. clean it off and start from new. I will be sure to back up the current files that are on there, but there's a lot of crap I don't need and rather than sort through it all, I figure I'll just format and then add stuff back on that I find I need. How do I do that safely? Are things that MUST be present at all times for Clockwork to function, or whatever?
Also, why would I add the ROM on before formatting - won't the formatting just erase the file?
I probably was confusing here: I thought adding the ROM to the SD before formatting, you could then copy everything over off the SD card. You can certainly just d/l the ROM to your computer and copy it over that way too.
CWM needs the clockworkmod folder, which is where things live including any ROM backups you may have.
Depending on the apps you have installed, they may have created a folder. If you don't have those apps but have those folders, you can delete them if they don't contain anything you need. There are folders there that Android will create upon first boot with a freshly formatted SD card.
EDIT: I adjusted my prior post with *hopefully* steps that aren't confusing.

[Q] extSD card problem after flashing Pheonix Rom v16.7

Hi, I am new to XDA so I have to report a bug (if it is) here for Phoenix rom v16.
I flashed this rom according to original thread carefully. Everything works well so far but only the extSD card.
My phone is Galaxy note2 N7100
I flashed Phoenix rom from 4.1.3 (I wiped mannually several times using Philz 15)
I have a 64gb class 10 sdcard(fat32) inserted which worked fine under old systems
When I first get into the new Phoenix rom, I noticed in setting-storage, I can see a external card mounted, but the total space is not right (around 10gb). And I used ES file explorer, trying to check the content there, but I cannot see nor write anything. I went back to setting-storage and unmount SD card, and then mount again. The space became right. And I can access to the card using ES file explorer also. It looked good!
However, after I flash the update and reboot the system, the problem comes back. I can see the card under setting-storage but with wrong size, and I cannot read or write again. After I physically pull out the card and then put it back in, and mount it again, it works.
I tried to reboot the system again, and problem came back after rebooting.
I don't know why the system cannot recognize the external sd card correctly after reboot by itself, only after you remount the card, you can use it normally. This really bothers me and I don't know how to solve this problem.
I th
Any thoughts will be appreciated!
Thank you
rikku1983 said:
Hi, I am new to XDA so I have to report a bug (if it is) here for Phoenix rom v16.
I flashed this rom according to original thread carefully. Everything works well so far but only the extSD card.
My phone is Galaxy note2 N7100
I flashed Phoenix rom from 4.1.3 (I wiped mannually several times using Philz 15)
I have a 64gb class 10 sdcard(fat32) inserted which worked fine under old systems
When I first get into the new Phoenix rom, I noticed in setting-storage, I can see a external card mounted, but the total space is not right (around 10gb). And I used ES file explorer, trying to check the content there, but I cannot see nor write anything. I went back to setting-storage and unmount SD card, and then mount again. The space became right. And I can access to the card using ES file explorer also. It looked good!
However, after I flash the update and reboot the system, the problem comes back. I can see the card under setting-storage but with wrong size, and I cannot read or write again. After I physically pull out the card and then put it back in, and mount it again, it works.
I tried to reboot the system again, and problem came back after rebooting.
I don't know why the system cannot recognize the external sd card correctly after reboot by itself, only after you remount the card, you can use it normally. This really bothers me and I don't know how to solve this problem.
I th
Any thoughts will be appreciated!
Thank you
Click to expand...
Click to collapse
Are you sure you didn't tick option/mod to use external sdcard as internal in aroma installer? This switches the cards and sometimes it states sdcard size incorrectly (depends what mod you're using). With some kernels this mod might not work and weird stuff can happen. If you didn't touch this option then I don't know what could it be.
squicky said:
Are you sure you didn't tick option/mod to use external sdcard as internal in aroma installer? This switches the cards and sometimes it states sdcard size incorrectly (depends what mod you're using). With some kernels this mod might not work and weird stuff can happen. If you didn't touch this option then I don't know what could it be.
Click to expand...
Click to collapse
OK, this could be the reason, I didn't notice this option during installation. I noticed in the orginal thread of the 4.3 phoenix rom that the internal card would be external and external would be internal. I didn't know that I have to choose this. I will look into it again.
By the way, if this happened, that means I will have a note2 with 64gb internal space? That is awesome!

Funky SD Card Issue

I have a T-Mobile Note 3, running DomPop v4.3. A new version (v5) came out and i was like why not. So i downloaded the files to my phone, which gets downloaded to my internal SD Card by default. I then moved it to the external SD Card. Then i backed up everything using TWRP 2..8.5.0. to my external SD Card, and did a normal wipe (data, cache, storage). After that i proceed to install the file and i cannot find it in the folder. I kept looking for 5 mins but no luck. So then i think there might have been some mistake and i'll restore to the backup i just made and that's not there either. I rechecked to make sure i hadn't backed it up in the internal storage but its not there either. So i reverted back to an older backup, which was still in my external SD Card. Upon reboot, i used ES File explorer to check my external Storage and the file i copied and the backups that i made wasnt there. Another interesting thing i noticed was that my TitaniumBackup folder had 0 files. I always make backups before each install and i'm sure there was 200+ files in there. So then i do a titanium backup, download the file again, but this time i copy it to external SD Card. Then i reboot into recovery, trying to install the file but its missing again. What ?? I reboot system without doing anything further and check my external SD Card and i see that the file i copied isnt there. And the Titaniumbackup folder that i just populated like 2-3 mins ago is empty again. I've repeated the process again and again - copying the file, doing titanium backup, and only rebooting my phone, and the files keeps getting deleted. I dont think its a R/W issue because i can write to those folders in the external SD Card just fine without any issues . Its just that when i reboot its gone. So what gives?
You might be better off asking in the DomPop Q&A thread. Maybe someone has had the same issue or already solved your issue over there.
Titanium backup is funky, and can sometimes create more problems than it can solve.
If you have mismatched bootloader and reflash the backup will bork your phone, can't figure out why you would use TB, I tried it once during my Galaxy S2 days and never bothered with it.
Maybe there is a different app that works better on lollipop.
Or you could be having the internal SD card issue that some are having, there is a fix in one of the update threads try that.
Pp.
Thanks for your input guys. The issue was with my Transcend Premium 300X 64 GB external SD Card. I'm not sure what but something broke it, and broke it bad to the extent that i cannot write on it anymore. I can view the existing files in there, copy it but cannot delete it. I cannot format the SD card either. I tried using command prompt (disk part, format), softwares (SD Card Formatter, HDD Low Level Format Tool, etc) but no luck. Keeps saying its unable to format. I tried removing the write protection which was off to begin with, and scanned it multiple times with different Anti-Virus software but to no avail. And yes, i also removed the lock in the adapter. So yea, seems like i'll have to throw this one away. Unless someone knows a hard-core tool to format this sucker because i tried most of the conventional ways/tools i can find in the internet and it didnt work for me. Thanks.
Check out you tube with different search prompts, you never know, someone may have put out a video on it.
Good luck.
Pp. Cyclops

[Q] Why is my sdcard named M-^|PNG^M^J^Z^J?

When I get prompted to allow SD write permissions when accessing my newly formatted sdcard, the name of the sdcard appears as M-^|PNG^M^J^Z^J. This is on V20i of stock rom.
Why?
Just rename it.. How is this a problem for you?
Where do I rename it? I couldn't see.
Edit: Wipe in twrp made it appear as "sdcard" so I'm happy now
Rename using PC!
WastedJoker said:
Edit: Wipe in twrp made it appear as "sdcard" so I'm happy now
Click to expand...
Click to collapse
Hi, pal! I have the same problem: when sd maid request to allow SD write permissions, the name of the sdcard appears as M-^|PNG^M^J^Z^J. My phone is samsung sm-a300fu with 5.0.2 stock rom. Did you do full wipe (clear user data)?
I can't rmemeber exactly but I think I just wiped the sdcard in twrp after moving the files onto my pc.
Same on xperia e5.
This thing happens when you set up your phone the first time after flashing a ROM i.e M or N versions or inserting a newly formatted memory card, or just a card that hasn't been used before on the device . If you ignore the msg that pops up about setting up the new memory card detected. the android system names it in this way by default. (I don't know why they choose this name, it hasn't been clarified anywhere over the Internet) although it doesn't cause any error that I have encountered still it's an annoying thing.
formatting the memory card is not an option for me, and renaming the card doesn't work, I need a better solution to change this annoying default name. that data must be stored somewhere on the device itself where I can change it. anyone has any clue?

Categories

Resources