Related
Hey everyone, I had just flashed cyanogen 10 kang with twrp and everything was fine until I decided to try and get the nexus s 4g modem which I had failed at every time before that. I would flash the rom, then gapps, Then the nexus modem patch before the shadow kernel. This time I flashed the shadow kernel before the nexus modem patch and it had apparentally powered itself off (I had left the room) so I tried to boot back into twrp, but it popped up with cwm 5.0 something instead. And the only backups I have are for twrp. . After I looked around in it for a little I tried flashing the rom and gapps again, booted up fine except I don't believe I had any signal. At all.
I tried to find something that would put twrp back onto my phone but haven't had any luck. And for some reason when I booted back into recovery it had changed to cwm 6.0 something. I don't know what to make of any of it. Right now I'm on cm9 snapshot beta 4 i think. I thought it was the one with twrp already in it so I thought I could try and restore my stuff.
Anyone have a remedy for this? I'd really appreciate it. Thank you in advance for your time.
swiftstrike763 said:
Hey everyone, I had just flashed cyanogen 10 kang with twrp and everything was fine until I decided to try and get the nexus s 4g modem which I had failed at every time before that. I would flash the rom, then gapps, Then the nexus modem patch before the shadow kernel. This time I flashed the shadow kernel before the nexus modem patch and it had apparentally powered itself off (I had left the room) so I tried to boot back into twrp, but it popped up with cwm 5.0 something instead. And the only backups I have are for twrp. . After I looked around in it for a little I tried flashing the rom and gapps again, booted up fine except I don't believe I had any signal. At all.
I tried to find something that would put twrp back onto my phone but haven't had any luck. And for some reason when I booted back into recovery it had changed to cwm 6.0 something. I don't know what to make of any of it. Right now I'm on cm9 snapshot beta 4 i think. I thought it was the one with twrp already in it so I thought I could try and restore my stuff.
Anyone have a remedy for this? I'd really appreciate it. Thank you in advance for your time.
Click to expand...
Click to collapse
You have to flash nyankernel or just the twrp zip. And next time when you flash from twrp, you need to pick inject twrp if you don't want cwm.
Sent from my SPH-D700 using Tapatalk 2
not trying to "thread-jack" - but I have a really similar problem (minus the twrp - which i'm not familiar with). Throughout my update to the crespo modem, during the mtd/bml check the phone would reboot into cwm - and I noticed that just like OP, the cwm would change to some 5.0version (not the usual 6 version)....
Here's what I have:
I was on CM Kang 7/30 with shadow kernel
I updated to CM Kang 8/08 (no problems)
I flashed the http://darkierawr.com/Android/Users/...atchcm7AIO.zip and I kept on getting Status 7 errors... I downloaded it a few times with the same result.
Then I saw someone say they flashed the kernel first and then the modem update... so I flashed the http://dl.dropbox.com/u/820341/Shadow-2_CM10_MdmCrp.zip (successful) and then tried flashing the modem update. Got stuck in a boot loop - so I did a battery pull.
Did a cold boot (pressing power) and now the phone "doesn't have a modem" no radio, no signal etc...
Tried it all over again - mounted system - formatted system - flashed 8/08 kang, gapps, then the modem update, and kernel.
my phone boots but no signal. is there a odin version of the modem that I can flash? or does anyone have any ideas?!?!?!
thanks!!
altimuh said:
not trying to "thread-jack" - but I have a really similar problem (minus the twrp - which i'm not familiar with). Throughout my update to the crespo modem, during the mtd/bml check the phone would reboot into cwm - and I noticed that just like OP, the cwm would change to some 5.0version (not the usual 6 version)....
Here's what I have:
I was on CM Kang 7/30 with shadow kernel
I updated to CM Kang 8/08 (no problems)
I flashed the http://darkierawr.com/Android/Users/...atchcm7AIO.zip and I kept on getting Status 7 errors... I downloaded it a few times with the same result.
Then I saw someone say they flashed the kernel first and then the modem update... so I flashed the http://dl.dropbox.com/u/820341/Shadow-2_CM10_MdmCrp.zip (successful) and then tried flashing the modem update. Got stuck in a boot loop - so I did a battery pull.
Did a cold boot (pressing power) and now the phone "doesn't have a modem" no radio, no signal etc...
Tried it all over again - mounted system - formatted system - flashed 8/08 kang, gapps, then the modem update, and kernel.
my phone boots but no signal. is there a odin version of the modem that I can flash? or does anyone have any ideas?!?!?!
thanks!!
Click to expand...
Click to collapse
Try http://marcusant.com/android/epic/modem.bin
Sent from my SPH-D700 using Tapatalk 2
Hey guys, got a problem here.
Today i wanted to try out the cyangenmod 10.1. I currently was on the icecoldjelly 421 2.0. After flashing the boot img and installing the cyanogen rom, after the reboot the rom keeps hanging on the load screen!
Tried erase cache but nothing worked. Flashed the boot.img from the rom(installer).
So that didnt worked. Brought back my phone to stock with a RUU. Everything works fine.
So again after this i installed cyanogen again... still the same problem, it hangs in the loading screen...
I thought maby the rom is faulty, so i installed the newest version of icecoldjelly 2.1, flashed the boot from the rom..... also with this rom it hangs on the loading screen.
Im no restoring my backup because i dont know what to do?
Im on hboot 1.36
pervious version of icecoldjelly 2.0 worked just fine.
So guys do you know what the problem could be? Never had thisbefore
tarreltje said:
Hey guys, got a problem here.
Today i wanted to try out the cyangenmod 10.1. I currently was on the icecoldjelly 421 2.0. After flashing the boot img and installing the cyanogen rom, after the reboot the rom keeps hanging on the load screen!
Tried erase cache but nothing worked. Flashed the boot.img from the rom(installer).
So that didnt worked. Brought back my phone to stock with a RUU. Everything works fine.
So again after this i installed cyanogen again... still the same problem, it hangs in the loading screen...
I thought maby the rom is faulty, so i installed the newest version of icecoldjelly 2.1, flashed the boot from the rom..... also with this rom it hangs on the loading screen.
Im no restoring my backup because i dont know what to do?
Im on hboot 1.36
pervious version of icecoldjelly 2.0 worked just fine.
So guys do you know what the problem could be? Never had thisbefore
Click to expand...
Click to collapse
After putting back my backup i tryed to install icecoldjelly 2.1 instead of cyanogen first.
What ive read and think i was forgotten was the full wipe of data before installing the rom. I now did this after reading again on the ICJ forum, and now the rom is working fine!!
CM should work too after a full wipe.
TToivanen said:
CM should work too after a full wipe.
Click to expand...
Click to collapse
I will try that out tomorrow , im done for today :laugh:
Just tried the cM10.1 rom with a full wipe and it worked!
Ofcourse it works........when TT says it works .... It works
this is just weird, as i have been installing custom ROM like crazy...
but for some time i was on CM 10.1.2 and didnt install any custom ROM, but i felt like coming back to TW based ROMs, so tried installing DeTmobilized 1.5, but phone stuck at boot screen, i tried to restart by pulling battery out but phone displayed "encryption failed" and kept on showing phone.apk stopped working (something similar). so i decided to ODIN to stock and start fresh, this time i tried installed Dandroid 3.8.1 and it worked, so i thought of giving DeTmobilized one more try, but again it got stuck at samsung letters at the boot.
so i decided to stick with Dandroid for a while, but now i cannot install that too. it gets stuck while booting. but if i ODIN to stock everything works fine on stock firmware, its only the custom ROMs that are not working.
i also tried repartitioning using PIT file along with stock md5 hoping that would solve this issue, but it hasnt.
i need help, i cannot stay on stock ROM.
thank you.
chirantan.f said:
this is just weird, as i have been installing custom ROM like crazy...
but for some time i was on CM 10.1.2 and didnt install any custom ROM, but i felt like coming back to TW based ROMs, so tried installing DeTmobilized 1.5, but phone stuck at boot screen, i tried to restart by pulling battery out but phone displayed "encryption failed" and kept on showing phone.apk stopped working (something similar). so i decided to ODIN to stock and start fresh, this time i tried installed Dandroid 3.8.1 and it worked, so i thought of giving DeTmobilized one more try, but again it got stuck at samsung letters at the boot.
so i decided to stick with Dandroid for a while, but now i cannot install that too. it gets stuck while booting. but if i ODIN to stock everything works fine on stock firmware, its only the custom ROMs that are not working.
i also tried repartitioning using PIT file along with stock md5 hoping that would solve this issue, but it hasnt.
i need help, i cannot stay on stock ROM.
thank you.
Click to expand...
Click to collapse
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
also make sure you're using the latest custom recovery (either twrp or cwm)
i would also like to note here that i tried installing AOSP based ROMs also, and AOKP didnt work, got stuck at nexus like boot animation forever, but when i tried installing CM10.1.2 (which is what i was running when i tried to get back to TW based ROM) it worked perfectly, so for now i am back to CM, but i would really get back to flashing different ROMs and trying them out. just makes me wonder if CM is the reason i am not able to install anything else, just a thought...
has anybody else tried going to any other ROMs from CM 10.1.2?
your help is appreciated!
pcshano said:
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
Click to expand...
Click to collapse
thanks for your reply, but i have tried doing that, i also wipe data and system along with cache and dalvik before installing any new ROM.
pcshano said:
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
also make sure you're using the latest custom recovery (either twrp or cwm)
Click to expand...
Click to collapse
i have latest recovery , TWRP 2.6.0.0 and i have given more than an hour to boot up and still nothing. i have been flashing ROMs like an addict since i got this phone last year, but when CM 10.1 stable was released i stayed on it till today, but now i cannot install any other ROM, i can odin to stock 4.1.1 ROM or install cm 10.1.2 which i did just now, but no other ROM, either TW based on AOSP based is working...which is very weird for me.
Were you able to fix this issue at all? I am facing the same issue, in my case, the phone was encrypted on stock TW. I roooted and put in CM 10.1.2 and now when I try installing Dandroid, the install itself would work but I am struck at the "type password to unlock the screen". If I reflash CM10.1.2, I can login fine. Any pointers?
I got this phone form my brother, but camera is not working, when I asked him how did it happened he said either upgrading from 4.0 to 4.1 or 4.1 to 4.2 camera always have error, it said 'unfortunately gallery has stopped '. After the 4.3 OTA the camera remains faulty. When I got this phone I thought to flash it with factory one of 4.3 using fast boot, I did... But no user, camera still not fixed. So I thought to return to 4.0 or 4.1, so I downloaded both from Google site.
1- I flashed 4.0 (imm76i) image, when the phone booted, it was running 4.2.2 ....Idk how. so I fastbooted again and flashed 4.0.4 again when phone booted version was 4.2.2. (This time noticed that when the phone booted it showed splash screen 'Google', then boot animation 'nexus cross' then immediately phone switches off and boot up again with splash screen.)
2- I flashed 4.1, again same headache... It booted to 4.2.2.....same story....
3- I flashed 4.3...then it booted to 4.3 only. why is this happening.
Plz help me to downgrade the phone.
_______________________________________________
-----------------------------------------------------------------------------
Different issue than above- Right now I'm running slim rom build 2.2.
And yeah one more thing, on slim rom I get all calls normal, and when I flashed PAC or Carbon or crDroid rom...I get no calls. Can't place any calls and can't pick any calls. Always 'com.android.phone stopped'...
sent from a phone running on SLIM ROM
Re: I need some help to fix my Galaxy Nexus
Have you been clean or dirty flashing?? It sounds like you need to completely wipe your phone (factory restore) and start over from scratch. I'd download the latest SlimBean 4.3 build 2.2 Official (based on Android 4.3.1) and the associated GAPPS (AIO). Boot into recovery, wipe data, cache, dalvik cache, and then flash SlimBean. You can go to the Slimroms website to download these.
This is what i'm running and having no issues...very stable.
Let me know if this works.
atishey23 said:
I got this phone form my brother, but camera is not working, when I asked him how did it happened he said either upgrading from 4.0 to 4.1 or 4.1 to 4.2 camera always have error, it said 'unfortunately gallery has stopped '. After the 4.3 OTA the camera remains faulty. When I got this phone I thought to flash it with factory one of 4.3 using fast boot, I did... But no user, camera still not fixed. So I thought to return to 4.0 or 4.1, so I downloaded both from Google site.
1- I flashed 4.0 (imm76i) image, when the phone booted, it was running 4.2.2 ....Idk how. so I fastbooted again and flashed 4.0.4 again when phone booted version was 4.2.2. (This time noticed that when the phone booted it showed splash screen 'Google', then boot animation 'nexus cross' then immediately phone switches off and boot up again with splash screen.)
2- I flashed 4.1, again same headache... It booted to 4.2.2.....same story....
3- I flashed 4.3...then it booted to 4.3 only. why is this happening.
Plz help me to degrade the phone.
Right now I'm running slim rom build 2.2.
And yeah one more thing, on slim rom I get all calls normal, and when I flashed PAC or Carbon or crDroid rom...I get no calls. Can't place any calls and can't pick any calls. Always 'com.android.phone stopped'...
sent from a phone running on SLIM ROM
Click to expand...
Click to collapse
dwoods1983 said:
Have you been clean or dirty flashing?? It sounds like you need to completely wipe your phone (factory restore) and start over from scratch. I'd download the latest SlimBean 4.3 build 2.2 Official (based on Android 4.3.1) and the associated GAPPS (AIO). Boot into recovery, wipe data, cache, dalvik cache, and then flash SlimBean. You can go to the Slimroms website to download these.
This is what i'm running and having no issues...very stable.
Let me know if this works.
Click to expand...
Click to collapse
Yes I have clean flashed 4.0.4 & 4.1... Formatted sdcard too.Then also I get 4.2.2 when I flash 4.0 & 4.1
And I never said I have problems with slim rom. It works fine for me.This is a different thing not related to stock image issue. That I can make calls in slim rom but can't make any calls in PAC or Carbon or crDroid rom.
sent from a phone running on SLIM ROM
#delete# wrong post
Hello guys i'm very new to SGS2 T-989 ...and recently got this 2 year old t-mobile sgh t989 ...and it worked fine for few day..till i trid cm11 as first custom rom on it..it too worked well until i used camera...it rebooted itself ...i thought it was because cm11 is nightly ..so i tried carbon rom ...it worked quit fine for a while......for some reson it to started rebooting after a while ..lastly i tried cm10.2 stable ...it worked quite good i updated with cm updater then after it worked good and affter a while it too strted rebooting ...i thaught of power button failure and replaced it too....and finally flashed stock JB 4.1.2 rom ...it works quite well even till now..but the problem is that i cant install custom roms on it ...any help would be honey in my throught...does any one have the issue...???.....................finally got to tell i'm new to this mobile not for customization of roms ..i tried every thing wipe/data/F.Reset/Delvik/System...and even trie super/dark wipe script too.....hmm the matter is unable to install custom roms/////
What recovery are you using? (latest is 2.8.1.0) get it here! Flashable .zip HereWich Gapps? . . . Stock 4.1.2 have some firmware upgrades so maybe you're good to go now if not you might want to try installing stock via Odin (kill any Kies process before using Odin). Find stock rom Here! You will need to register to dwl. Ooh and dont use darkside wipes scripts as they are outdated, you can/will brick your phone. Just wipe system, data, cache, dalvik and .android_secure
I'm using cwm 6.0.4.3 ...and I flashed stock rom the latest ...I have root and cwm backup too...stock rom works completely perfect ....prblm is with custom roms..
Keep a copy of cmw and your backups just in case and try flashing using twrp. Also read this thread , "Have you ever used odin to flash the factory 4.1.2 UVMC6 rom? Some driver stuff was updated in that version and can only be installed with odin."
I've used odin 3.0.7 to falsh stock t989 latest jb 4.1 ...stock rom works 100%....problem is with 4.2+ roms
Ok was just to be sure its not that.. did you try flashing with twrp??
Also what scheduler/governor are you using? I use sio/samsung (personnal choice) (stable, decent battery life, good performance) found out that some combinaisons crash the phone (reboot)
Just now installed twrp that u mentioned and took a backup....now I will try the cus rom process and tell u the result ...hoping this eleminates my problem...and one more thing...im just using stock rooted rom..had not done any changes with cpu governence...and have a decent battery..
Only problem is with KK and 4.3 Roms
I've changed the rrecovery to twrp latest and tried installing from CM9 worked ,
CM 10.1 even worked [4.2.2] :good: [camera crashes while using flash]
Tried 10.2 had bootloops.....whats wrong with 4.3+...help :crying:
Glad to hear that
Camera is known to crash when using the flash and battery is low.
About 10.2 idk .. maybe it has to do with CM itself (search in CM threads). Try some other roms/kernels combinaison. as long as you have a backup of a working setup you should be good. Personnaly i really liked hellkat w/diablo kernel (4.4.2) and Beanstalk w/wildkernel (4.4.4) but as they say , your mileage may vary.
K that's very helpful and ..tnx for ur sugession