Related
i flashed the CyanogenMod 9.0.0-RC0-GT-S5660-GalaxyICS-KANG-beta5, everything seemed to work fine, then i noticed that i wasn't getting any service at all. i then tried cyanogen 7.2 and same story. 7.2 is letting me make 911 calls unlike the ics rom.
can anyone help me pin the problem down and fix it? please and many thanks
i'm now in an endless boot cycle...
is there a guide to just to back to stock?
Flash stock rom via Odin if u want
@wiwid_colgate
Galaxy Gio S5660
#GalaxyICS
it was a supposed stock oden flash that caused me the never ending boot cycle
Odin does not reformat the /data and /cache partitions. Which would cause bootloops on a stock kernel that doesn't know how to handle ext4.
Use an RFS compatible recovery. Otherwise dd back empty RFS partitions back into place.
i had some problems with setting other launcher than adw on default. next time i'd restart the phone it got stucked at samsung logo. So i didn't set my favorite launcher on default and problems were solved. maybe it'll help.
For me the same prob. no service with CyanogenMod 9.0.0-RC0-GT-S5660-GalaxyICS-KANG-beta5 and cyanogen 7.2.
After that i flash with "S5660XXKTI - SER" (One Package-Android 2.3.6 Gingerbread stock)with odin and it runs like a train....(not like the dutch trains)
Do a full whipe before and after flashing.
coolhof said:
with odin and it runs like a train....(not like the dutch trains)
Click to expand...
Click to collapse
lol. that sentence has to be explained for people outside of the netherlands...
our train service is well known because of not driving trains when it freezes, a bit. like -10 degrees and ''wissels'' the things that make sure a train can move from railroad to another railroad, something like this..
we know much about water and dikes, but not about trainrail.
lol
misfit41 said:
i flashed the CyanogenMod 9.0.0-RC0-GT-S5660-GalaxyICS-KANG-beta5, everything seemed to work fine, then i noticed that i wasn't getting any service at all. i then tried cyanogen 7.2 and same story. 7.2 is letting me make 911 calls unlike the ics rom.
can anyone help me pin the problem down and fix it? please and many thanks
Click to expand...
Click to collapse
Wait.. you tested it by calling 911?
Sent from my GT-S5660 using xda premium
sim card problem
hey collholf , i have same problem with my gio, it say no service i have fully wiped and then flashed S5660XXKTI - SER" (One Package-Android 2.3.6 Gingerbread stock) after flashing i have wiped again , but i m still having same problem , plz help me out of this , my gio recognize the sim card for two hours or four hours then it says no service or no mobile network.
suhailaslam said:
hey collholf , i have same problem with my gio, it say no service i have fully wiped and then flashed S5660XXKTI - SER" (One Package-Android 2.3.6 Gingerbread stock) after flashing i have wiped again , but i m still having same problem , plz help me out of this , my gio recognize the sim card for two hours or four hours then it says no service or no mobile network.
Click to expand...
Click to collapse
You can try another stock firmware go back to 2.2.1 Froyo or 2.3.3. Gingerbread.
And don't forget to select Wipe data/factory reset before and after flashing.
Check if everything is working,if so than flash 3.3.6.
More i really don't no.
Maybe it has to do something about the "radio" you can found out by search here on xda.
Hi Guys!
Well, basically..
the problem I have is just like in the title.
My SGW I8150 keeps constantly prompting "Enter password to unlock" (phone is on, at lock screen) despite numerous hard resets,(got CWM 6 recovery) formatting,clearing cache,dalvik etc.
it all started when i set up a short password for the lock screen.. (rom was stock, rooted and cwm 6, if not 2.3.5 then 2.3.6)
googled a lot, read a lot, no avail.
later flashed ics and had a week of struggle. mainly because of battery draining fast.
AND now, since I wanted to return to stock, because I do, the reason is the same. battery lasts the longest on that stock rom. I do a lot of texting calling music, pics and occasionally internet. 2 days battery lasted.
So i downloaded bagux-project-v1.4, rom had mostly everything i needed and installed it and still the same problem. Of course the initial setup settings always were present but after i completed them and the second the phone locks, the problem still persists..
rebelrom 3.0 as well shows the same..
only cyanogenmod rom's like "ancora beta3" or ics or any other rom which doesn't have the baseband / kernel (correct me) something in common shows this problem.
Also, no "forgot password" (e-mail help) does not pop up at all. only "emergency call".
I flashed other roms; Cm7 & arco68 CM9 and some other ics roms. THIS PROBLEM DOES NOT HAPPEN ON EITHER ICS version..
I have no idea why is this happening only on the roms generally similar to stock. 2.3.5 , 2.3.6 , 2.3.7
Please try to help if You can
baldusiek said:
Hi Guys!
Well, basically..
the problem I have is just like in the title.
My SGW I8150 keeps constantly prompting "Enter password to unlock" (phone is on, at lock screen) despite numerous hard resets,(got CWM 6 recovery) formatting,clearing cache,dalvik etc.
it all started when i set up a short password for the lock screen.. (rom was stock, rooted and cwm 6, if not 2.3.5 then 2.3.6)
googled a lot, read a lot, no avail.
later flashed ics and had a week of struggle. mainly because of battery draining fast.
AND now, since I wanted to return to stock, because I do, the reason is the same. battery lasts the longest on that stock rom. I do a lot of texting calling music, pics and occasionally internet. 2 days battery lasted.
So i downloaded bagux-project-v1.4, rom had mostly everything i needed and installed it and still the same problem. Of course the initial setup settings always were present but after i completed them and the second the phone locks, the problem still persists..
rebelrom 3.0 as well shows the same..
only cyanogenmod rom's like "ancora beta3" or ics or any other rom which doesn't have the baseband / kernel (correct me) something in common shows this problem.
Also, no "forgot password" (e-mail help) does not pop up at all. only "emergency call".
I flashed other roms; Cm7 & arco68 CM9 and some other ics roms. THIS PROBLEM DOES NOT HAPPEN ON EITHER ICS version..
I have no idea why is this happening only on the roms generally similar to stock. 2.3.5 , 2.3.6 , 2.3.7
Please try to help if You can
Click to expand...
Click to collapse
Try formatting the system cia CWM before flashing. See if that fixes your problem.
bbmadzky said:
Try formatting the system cia CWM before flashing. See if that fixes your problem.
Click to expand...
Click to collapse
bbmadzky, I did that numerous of times.
aotm, I'm back on CM9 ics 4.0.4 ancora. Best I can have for now..
baldusiek said:
bbmadzky, I did that numerous of times.
aotm, I'm back on CM9 ics 4.0.4 ancora. Best I can have for now..
Click to expand...
Click to collapse
how many times?lol..
anyways, how about formating system and everything....then......
download a firmware from sammy and flash it via odin..
or, you could follow this link:
http://forum.xda-developers.com/showthread.php?t=1467128
-salute!
reinjoy said:
how many times?lol..
anyways, how about formating system and everything....then......
download a firmware from sammy and flash it via odin..
or, you could follow this link:
http://forum.xda-developers.com/showthread.php?t=1467128
-salute!
Click to expand...
Click to collapse
a lot..
I said that before.. i did factory wipe/reset ,2nd option cache as well from cwm6 as well formatted the system, cache, dalvik, sdcard,onboard storage. one by one. did factory reset by using code *2767*3855#, still password prompt. downloaded a stock rom from sammy, flashed it via odin, still password prompt exists.
In my opinion, some data (specifically that unlock thing, password prompt) is left over on some piece of memory in the phone even though wiping, flashing and clearing has happened..
Hello... Please..Could anyone help me? Show me a way to do a FULL, but I mean seriously a COMPLETE WIPE of Data from each memory part on the motherboard.. Or at least something like that ?
Like I said, this happens only When the base of the rom is gingerbread..
Custom rom's/stock based on gingerbread when installed and the lock/power button is pressed and then again to turn the screen on, right away shows the password prompt...and that's where it all ends..
I had to install ICS, which is buggy and drains battery fast and since t's a whole new base to start from, the problem with password prompt disappears..
I don't know what to do anymore.. I'm not a noob at this because I have rooted MYSELF and flashed roms and other stuff to Samsung Gio Samsung Galaxy S II and Htc Desire-Z (a7272) and now I have my wonder I8150 and this weird thing just happened..
Strange things happen to my i9195... suddenly out of the blue,wifi won't turn on neither from quick settings panel nor the settings itself...
Everything else works as it should(data,bluetooth,airplane,gps,sound etc) but the wifi setting tries to turn on but immediately turns of. anyone had this problem?
and more important... a solution??????????
Which rom are you on? You could try reflashing a rom to clear any possible software issues
yes try reflash rom
Whosat said:
Which rom are you on? You could try reflashing a rom to clear any possible software issues
Click to expand...
Click to collapse
citymen34 said:
yes try reflash rom
Click to expand...
Click to collapse
thanks guys for your replies...
i was on stock rooted xxuamf4, i flashed both xxuamh3 and xxuamg8 (these two i had already downloaded) but problem remained. just to eliminate software issue , as a last resort i flashed CM 10.1.3 and magically my device was fully functional again( by the way ..:good: to CM...).
So WTF? i 'll try later to flash a stock non rooted fw and see what will happen...
p.s : anyone know how to change baseband? in my sgs3 mini i used to flash different modem for that. what works for this device?
p.s 2 : thanks again for your time guys!:good:
flashing back stock firmware , problem reappeared! it seems something has to do with knox , because every time i try to open wifi a toasted notification appears "prevention information... the device as detected...bla...bla...bla"
the thing is that if i root my phone and completely delete knox,knox agent,store and container agent, the notification stops but the wifi setting still cannot be enable.
any ideas????
flashing back stock firmware , problem reappeared! it seems something has to do with knox , because every time i try to open wifi a toasted notification appears "prevention information... the device as detected...bla...bla...bla"
the thing is that if i root my phone and completely delete knox,knox agent,store and container agent, the notification stops but the wifi setting still cannot be enable.
any ideas????
Back to report that re-rooting with arco's method but with rootkit v2 (that includes kernel) seems to solve the issue! the steps i follow was :
1) gain root
2) install cwm recovery
3) with es explorer delete knox store,knox agent, container agent (both apk and odex files)
4) reboot to cwm recovery
5) clear cache and davlik cache
6) reboot and RESURRECTION!!!:good:
WiFi and Modem Issue
hi guys. i'm sorry for asking my question here,i have i9192 & my wifi do not turn on. i flash various version of official rom, but i cant solve this problem. I flash (MH2 ,MF7 ,MF9 and MJ2...) build number & CSC are change but Baseband version remain constant and don't change.
how can i flash modem( NON_HLOS.bin)...?
i root my phone so many time with Rootkit v2 and do all wipes for clean flash... but no successive achieve
how can i repair my WiFi and Bluetooth?
tighoory said:
hi guys. i'm sorry for asking my question here,i have i9192 & my wifi do not turn on. i flash various version of official rom, but i cant solve this problem. I flash (MH2 ,MF7 ,MF9 and MJ2...) build number & CSC are change but Baseband version remain constant and don't change.
how can i flash modem( NON_HLOS.bin)...?
i root my phone so many time with Rootkit v2 and do all wipes for clean flash... but no successive achieve
how can i repair my WiFi and Bluetooth?
Click to expand...
Click to collapse
i think it's a kernel related issue. But first in order to eliminated hardware problem possibility, try to flash a cm rom. If your wifi and bluetooth works then you can be sure it's not a hardware failure. in my case flashing a different kernel solved the issue.
p.s : if you find a way to change baseband version ,please share the way!!!
tighoory said:
hi guys. i'm sorry for asking my question here,i have i9192 & my wifi do not turn on. i flash various version of official rom, but i cant solve this problem. I flash (MH2 ,MF7 ,MF9 and MJ2...) build number & CSC are change but Baseband version remain constant and don't change.
how can i flash modem( NON_HLOS.bin)...?
i root my phone so many time with Rootkit v2 and do all wipes for clean flash... but no successive achieve
how can i repair my WiFi and Bluetooth?
Click to expand...
Click to collapse
you need flash same version Kernal file, example: when you finished flash MH2 stock firmware, if wifi shotdown, just flash MH2's Kernal file, file size around 7MB
hey hi
even i have the same error while turning on wi-fi prevention information blah blah
can you be brief how did you solved dat issue. it ll be very helpful
saiprasadap92 said:
hey hi
even i have the same error while turning on wi-fi prevention information blah blah
can you be brief how did you solved dat issue. it ll be very helpful
Click to expand...
Click to collapse
the solution for me was more or less "flashing rooted arco's kernel" . but my model is 9195. i honestly don't know if there is one for 9192 ,but if i were you i would search for one!
vriz27 said:
the solution for me was more or less "flashing rooted arco's kernel" . but my model is 9195. i honestly don't know if there is one for 9192 ,but if i were you i would search for one!
Click to expand...
Click to collapse
yeah thanks fa the reply . ill search for my phone and if you get the same for my phone do let me know
I have problem whith my s4 mini.. I9192 dual sim
Baseband : Nd1
When i want to connectt to wifi i enter password.. As soon as i hit the connectt button wifi signal will desappear... I updated the frameware but no sucsess...
How to solve?
Is it hardware issue?
Same problem for me (1st post): new i9195 with latest XXUCNK1, never flashed before,
install twrp and make a backup, install CM-12.1 and CM-13 without any issue,
After restore to KK using my twrp backup I can't turn on wifi,
solution was to flash Modem_I9195XXUCNK1.tar from modem thread.
I notice that twrp doesn't restore previous modem I update to XXUCOL1
Hi guys,
I have had the s2,s3,galaxy nexus,original note and i am used to flashing and modifying,but i have a serious issue with the note 2.
The problem is whenever i flash AOSP rom(cm,aokp,pa) my wifi would not connect.It shows the name of the network and when i click conenct nothing happens.Flashing back TW rom fixes it,wifi works like a charm. I've done full wipes but it doesn't seem to resolve the issue.I tried different kernels,but that doesn't help either.
So I am stuck at TW roms and i hate that.Anyone has any ideas?
You can try options 2 and 3 from this thread.
Thanks for your reply,but i tried this and it didn't solve my problem.
Anyone?
spookhc said:
Anyone?
Click to expand...
Click to collapse
I Have the same problem...
Not sure that it will help you but I read something yesterday about this issue.
The solution was to NOT restore your Google profile during first boot so you should full wipe and try again.
Primokorn said:
Not sure that it will help you but I read something yesterday about this issue.
The solution was to NOT restore your Google profile during first boot so you should full wipe and try again.
Click to expand...
Click to collapse
This actually has nothing to do with the problem.
After a few days I finally found the cause ,and therefore,a decision to the problem.
It is the bootloader from 4.3 sammy leaks.It seems that this new leaks(probably the reason being KNOX) cause malfunction of wifi in aosp roms.What i did was ODIN flash stock MG1 from sammobile .This brought back stock recovery so i had to flash TWRP again and it solved the issue for me.
Before that i had tried changing roms,kernels,recovery,modems and nothing worked so I am pretty sure it is the new 4.3 leaks bootloader.
Some people will say that it can\t be the issue because they are using 4.3 sammy and do not experience the same problem on aosp roms,but i think thats because they flash it through CMW ,which doesn't change bootloader,while flashing through ODIN does.
With my Note2 this is not the solution. I've tried everything. What you said, move file "pit" ..... but nothing. I can not connect wifi. The connection does not appear region Spain, and have opted to choose europe, but neither. I do not know to do. CM 10.1 also does not work WIFI. In Stock ROM or Custom ROM works fine fine, but in ROM CM 10.1, 10.2, AOKP don't work.
spookhc said:
This actually has nothing to do with the problem.
After a few days I finally found the cause ,and therefore,a decision to the problem.
It is the bootloader from 4.3 sammy leaks.It seems that this new leaks(probably the reason being KNOX) cause malfunction of wifi in aosp roms.What i did was ODIN flash stock MG1 from sammobile .This brought back stock recovery so i had to flash TWRP again and it solved the issue for me.
Before that i had tried changing roms,kernels,recovery,modems and nothing worked so I am pretty sure it is the new 4.3 leaks bootloader.
Some people will say that it can\t be the issue because they are using 4.3 sammy and do not experience the same problem on aosp roms,but i think thats because they flash it through CMW ,which doesn't change bootloader,while flashing through ODIN does.
Click to expand...
Click to collapse
Am so sorry mods if i didn't post this in the right section, I have limited sections i can paste owing to the fact that am still a junior member and my posts aren't up to 10. I have an sgh-t999 samsung galaxy s3, that is the snapdragon chipset type. I would love to update the whole firmware to 4.3 boatloader, baseband and so on just dat i've only succeeded in updating the baseband to the latest but not the boatloader cos it will involve downloading the whole firmware and am scared of this knox security stuff imbeded in 4.3 and another thing is that i have a slow network which might cause broken and corrupt downloads. My main problem is that when ever i flash any kitkat custom rom, that is all this weekly, nightlies and so on roms, am always having this persistent cannot connect to the camera error which i have searched for a fix to no avail. Ok look at how I have tried to fix it, i copied the camera data of a touchwhiz rom to replace the kitkat own but no changes, have tried restarting and wiping but still same problem. I happened to come across this beautiful rom ie [D2LTE]
~~AICP~~4.4.4----{5.0}---(RELEASE)-JUN-25 rom which i so much love and discovered that it has same problem. Seriously if it were just the bluetooth, i wouldn't have any problems but the camera is ab essential somethhing i can't stay with. Is this problem because am flashing a kitkat custom rom without an updated boatloader or is it particular to the rom? I need some help plz. How do i have a long standing solution to it?
dikachik1 said:
Am so sorry mods if i didn't post this in the right section, I have limited sections i can paste owing to the fact that am still a junior member and my posts aren't up to 10. I have an sgh-t999 samsung galaxy s3, that is the snapdragon chipset type. I would love to update the whole firmware to 4.3 boatloader, baseband and so on just dat i've only succeeded in updating the baseband to the latest but not the boatloader cos it will involve downloading the whole firmware and am scared of this knox security stuff imbeded in 4.3 and another thing is that i have a slow network which might cause broken and corrupt downloads. My main problem is that when ever i flash any kitkat custom rom, that is all this weekly, nightlies and so on roms, am always having this persistent cannot connect to the camera error which i have searched for a fix to no avail. Ok look at how I have tried to fix it, i copied the camera data of a touchwhiz rom to replace the kitkat own but no changes, have tried restarting and wiping but still same problem. I happened to come across this beautiful rom ie [D2LTE]
~~AICP~~4.4.4----{5.0}---(RELEASE)-JUN-25 rom which i so much love and discovered that it has same problem. Seriously if it were just the bluetooth, i wouldn't have any problems but the camera is ab essential somethhing i can't stay with. Is this problem because am flashing a kitkat custom rom without an updated boatloader or is it particular to the rom? I need some help plz. How do i have a long standing solution to it?
Click to expand...
Click to collapse
Are you getting force close?
Sent from my GT-I9100G using XDA Premium 4 mobile app
dikachik1 said:
Am so sorry mods if i didn't post this in the right section, I have limited sections i can paste owing to the fact that am still a junior member and my posts aren't up to 10. I have an sgh-t999 samsung galaxy s3, that is the snapdragon chipset type. I would love to update the whole firmware to 4.3 boatloader, baseband and so on just dat i've only succeeded in updating the baseband to the latest but not the boatloader cos it will involve downloading the whole firmware and am scared of this knox security stuff imbeded in 4.3 and another thing is that i have a slow network which might cause broken and corrupt downloads. My main problem is that when ever i flash any kitkat custom rom, that is all this weekly, nightlies and so on roms, am always having this persistent cannot connect to the camera error which i have searched for a fix to no avail. Ok look at how I have tried to fix it, i copied the camera data of a touchwhiz rom to replace the kitkat own but no changes, have tried restarting and wiping but still same problem. I happened to come across this beautiful rom ie [D2LTE]
~~AICP~~4.4.4----{5.0}---(RELEASE)-JUN-25 rom which i so much love and discovered that it has same problem. Seriously if it were just the bluetooth, i wouldn't have any problems but the camera is ab essential somethhing i can't stay with. Is this problem because am flashing a kitkat custom rom without an updated boatloader or is it particular to the rom? I need some help plz. How do i have a long standing solution to it?
Click to expand...
Click to collapse
As you have installed custom recovery so I feel it might have increased your warranty count and as far flashing 4.3 rom, I don't think if you flash root66 of latest NC2 build is going to harm as only thing that you will not be /should not flash older firmware in Odin as it will brick your device but you will be able to flash older custom Rom in recovery without any issues
With this you will be enjoying latest bootloader and modem and use all 4.4 Rom without issues.
For camera issue, you download other camera from play store and try as I used Google camera without issues on this Rom but I am on latest bootloader and modem.
Something like a force close
captaindeep said:
Are you getting force close?
Sent from my GT-I9100G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not exactly cos when i tap on the camera icon, the error message just appears ie cannot connect to the camera, restart camera or ok. When u click on restart, the camera just restarts but does same thing but if u click on ok, the camera just closes.