[AIO] Micromax Canvas Juice A77 [Root, Recovery, Roms, Etc][MTK6572] - Micromax Canvas Juice Guides, News, & Discussion

[AIO] Micromax Canvas Juice A77 [Root, Recovery, Roms, Etc][MTK6572] - Micromax Canvas Juice Guides, News, & Discussion

MICROMAX CANVAS JUICE A77Root, Recovery, Rom, Tips, Etc
Specification
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to GSMARENA for specification
Click to expand...
Click to collapse
Overview Of The Thread
Click to expand...
Click to collapse
Post#2 - How to Root
Post#3 - Stock rom and its installation tutorial
Post#4 - Backup and its process & Driver and it installation process
Post#5 - Recoveries and its way of installtion
Post#6 - Some tips and trick that can power or make its efficient for some tasks.
Post#7 - Custom rom, ported and scratch developed.
Post#8 - Credit, Peoples that help me or guide me.

Rooting- Granting privileges access
Root
Click to expand...
Click to collapse
1. Download the Framaroot Application(here)
2. Open the application.
3. Click on SuperSU
4. Click on Boromir
5. Reboot!

Stock Rom(firmware)
Stock Rom
Click to expand...
Click to collapse
Download from here
Tutorial: How to install stock rom.
Click to expand...
Click to collapse
Unpack FlashTools, and Click on Flash_tool.exe
Select a the MT6572_Android_scatter_emmc.txt in ROM
Wait file to be added into Flash Tool
Choose Option->USB Model,click USB Model
Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
Turn off your phone, remove the battery.
"Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
And connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear after color purple, yellow.
And green circles display
Done

How for create Backup & Driver that your PC can recognize the device
BACKUP & DRIVERS
Click to expand...
Click to collapse
Mtk droid tool 2.5.2: https://www.mediafire.com/?49cblxn4o7ougph
mtk 65** drivers: http://ge.tt/7xA9h3a/v/0
How to install MTK USB driver manually on Windows
Click to expand...
Click to collapse
In Windows, go to Control Panel and open Device Manager
Click any of the device groups you see there
From Action menu, select Add legacy hardware
Add hardware wizard will be opened, click next
Select Install the hardware that I manually select from a list (Advanced)
Click next two times and click Have Disk button
Click browse and find where your driver .inf file is, then select it
Click Open and OK. You will see the drivers listed. Select your driver there and click next and finish installing.
BACKUP
Click to expand...
Click to collapse
Method 1(hard way):
Click to expand...
Click to collapse
1. Open Mtk Droid tool
make sure the indicator is green(as in image)
[/IMG]
2. click on root,backup,recovery
3.click on backup button
it will take some time the "MtkDroidTools\backups"
Method 2(easier way):
Click to expand...
Click to collapse
For this you have cwm installed in your device.
1. Boot into cwm.
2. Select Backup and restore
3. Select Backup
4. Wait it will take time.
5. Done, reboot your device by selecting reboot.
6. Your backup is now created to your sd card(sdcard/clockworkmod/Backup/*here*).

Recoveries
Recovery
Click to expand...
Click to collapse
CWM
Click to expand...
Click to collapse
Method 1(hard way):
Click to expand...
Click to collapse
For CWM Recovery install
1. choose the Radiobutton "To choose the boot.img file".
2. Click on Recovery and Boot button.
3. Select the boot.img (actually, u have to first backup the rom(which is in the #4 post) after backup. boot.img is present in the mtkdroidtool/backups/"your backup folder"/" here is the boot.img")
4. Wait when it will done....
Method 2(easier way):
Click to expand...
Click to collapse
1. Download this
2. Copy it to root of the sd card(directly to sd card, not in any folder)
3. rename it to "recovery" (with out quotes " )
4. install MOBILE UNCLE TOOLS
5. Open it(make sure you have rooted).
6. Click on "Recovery Update".
7. Select recovery.img
8. done reboot it.
Carliv Touch Recovery
Click to expand...
Click to collapse
↔Touch is not working in recovery↔
Click to expand...
Click to collapse
Download: http://fs1.d-h.st/download/00088/Zob/6044.7z
1. Download it.
2. Make sure your phone is connected and driver are installed on system.
3. Run the program which you have downloaded, press ok on every Dialog Box.
4. Phone will be automatically reboots
Done
Screen of Carliv Touch Recovery

Tips & Tricks
Tips And Tricks
Click to expand...
Click to collapse
1. Swap Internal storage to External Storage
Because this device have less internal storage and user can suffer "full storage error" and you can also install huge hd game with requires more than 600 mb of data and many storage for app installation too.
HTML:
Method 1:
1. Install Root Explorer(make sure you have rooted.
2. Open system/etc
3. Open vold.fstab as a text file
4. Change "sdcard0" to "sdcard1" and vice versa
5. save and reboot
HTML:
Method 2:
1. Download this file from attachment
2. Rename it to Vold.fstab(delete the ".txt")
3. Replace it with your Volt.fstab.(present in system/etc)
4. Set permission as:
PHP:
r w
r
r
4. Reboot
2. Pie Control
I know that you all have faced some problem with this 5" device that you can't effectively use this with your one hand(if you can then you really have a huge hands). So here is its resolving. You can setup it by using back, menu, home, notification down and much more app and utilities. Here you can go for the steps.
1. Make sure you have rooted your device.
2. Download this from play store
3. Set up it with your idea
3. Engineer Mode
ENGINEER MODE help in editing hardware configuration of device, like audio level, camera settings ,network settings, GPS setting , etc
1. Open Dialer
2. Dial *#*#3646633#*#*
3. done but beware for unwanted result after using this mode

Custom Roms
CUSTOM ROMS
Click to expand...
Click to collapse
1. LeWa OS v5 - By GeekShivam (4.2.2)
2. Galaxy S5 rom - By Siddhant NAik (4.4.2)
3. Galaxy S4 rom - By Siddhant NAik (4.2.2)

Credit
Credit
Click to expand...
Click to collapse
Deathviper
A N D Y
akashpillai

reserved here

Can i use a more reservation for future updates

Nice to see u Aamir A new Juice dev emerges!

wow! thanks for pure info and development of canvas juice i like your style man.... the way of thread is cool keep up also thanked on all your post

I did an Un-Boxing You Can include it in 1st post if you would like to

Nothing Custom ROM ?
nothing good idea to make awesome custom rom ???

no

custom roms ?
any possiblity of custom roms for juice a77?

vktisnow said:
any possiblity of custom roms for juice a77?
Click to expand...
Click to collapse
Ganxz said:
nothing good idea to make awesome custom rom ???
Click to expand...
Click to collapse
If you guys can give me a link to the stock ROM I'll see what I can do. I don't have the device so you guys well have to test
Sent from my Amazon Kindle Fire using XDA Premium 4 mobile app

androvista said:
If you guys can give me a link to the stock ROM I'll see what I can do. I don't have the device so you guys well have to test
Sent from my Amazon Kindle Fire using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=49018875&postcount=3

Will it work for Canvas A177 Juice
Guys i recently bought a Canvas A177 Juice for my father, will this same method work on my phone? It has almost the same specifications.

deathviper said:
1. Download the Framaroot Application(here)
2. Open the application.
3. Click on SuperSU
4. Click on Boromir
5. Reboot!
Click to expand...
Click to collapse
Please tell me how to unroot it. If possible give some similar screenshots of your tutorial.
Sent from my Micromax A77 using xda app-developers app
---------- Post added at 08:22 AM ---------- Previous post was at 08:02 AM ----------
deathviper said:
1. Swap Internal storage to External Storage
Because this device have less internal storage and user can suffer "full storage error" and you can also install huge hd game with requires more than 600 mb of data and many storage for app installation too.
HTML:
Method 1:
1. Install Root Explorer(make sure you have rooted.
2. Open system/etc
3. Open vold.fstab as a text file
4. Change "sdcard0" to "sdcard1" and vice versa
5. save and reboot
HTML:
Method 2:
1. Download this file from attachment
2. Rename it to Vold.fstab(delete the ".txt")
3. Replace it with your Volt.fstab.(present in system/etc)
4. Set permission as:
PHP:
r w
r
r
4. Reboot
2. Pie Control
I know that you all have faced some problem with this 5" device that you can't effectively use this with your one hand(if you can then you really have a huge hands). So here is its resolving. You can setup it by using back, menu, home, notification down and much more app and utilities. Here you can go for the steps.
1. Make sure you have rooted your device.
2. Download this from play store
3. Set up it with your idea
3. Engineer Mode
ENGINEER MODE help in editing hardware configuration of device, like audio level, camera settings ,network settings, GPS setting , etc
1. Open Dialer
2. Dial *#*#3646633#*#*
3. done but beware for unwanted result after using this mode
Click to expand...
Click to collapse
Well, I am confused in changing sdcard0 to sdcard1 ( there is 3 or 4 times sdcard is written) as it is a very sensitive place to make changes so i am requesting for some screenshots with underlined respective words that has to be changed.
Sent from my Micromax A77 using xda app-developers app

Related

[MOD][ICS][Development]Karbonn A18 4.0.3

Hello Guys i made this post for the karbonn a18 owners for some mods and upgrade any way till now i tried Google Now for this device.More would be coming,if you got an types of the mods just reply i will paste the link here
1.Google Now For Karbonn A18
You need about 60mb free space in your system folder.
Here is the full guide to install Google now for this device without having any custom rom or any recovery and its simple
First you would need root explore you can search it on google an get it for free or you can take any other root file manager and make sure superuser is installed. The file to be downloaded (Google Now) Link.http://www.mediafire.com/?5bpbla2pj260c3n
Ok after you install the files which i told to download follow these steps.
1.Unzip the .zip file which i given to you and copy paste it to your sdcard in an folder
2.Install and Open the root explore or any other root explore if you want.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3.After that click at Mount R/O which is written at up
4.Next go to the folder where you extracted the files.(for root explore guys mnt>select sdcard for internal or sdcard2 for extrenal) and then first go to usr>srec>and copy both config and en-US folder.(for root explorejust press menu and select multiselect)
5.Now just got to system>usr>srec and paste there these two folder.
It will be like this
6.now copy the lib folder from the sdcard and paste it into system it will promote just click merge.
7.IMPORTANT THING:After these step go to system>app and now search for GoogleOuickSearchBox.apk and rename it as GoogleOuickSearchBox.apk.bak you need to do this it is the main part.
7.Ok the last thing is left is velvet.apk and googletts.apk install them both.
8.After that Power Off your phone and then again power on and then try to run google now and enjoy !!!
If you got any question just reply here
the velvet.apk file is made by cajunflavoredbob and for updates of the apk please visit his post.
I am trying to make more mods for this device and the latest i am trying to build is clockworkmod recovery so be updated and reply if you got any thing new for this phones
Unknown Info Of This Device
1.This Phone is already rooted all you need is download superuser
2.You can take an screenshot without installing any software just press and hold power button + volume down button.
3.There is an Android Recovery System installed in this device to see that power off the phone and then hold power button and volume down button and then use the volume button to go up and down and home button to select and menu button to go back.
That's all i know on this phone just post reply and i add more unknown info here

you did it without deodexing?
google now op says rom must be deodexed!!

jainkashish96 said:
you did it without deodexing?
google now op says rom must be deodexed!!
Click to expand...
Click to collapse
No we can also do without that only stuff you need is ics rom and armv7 processor and it will work without flashing.Anyway i dont know about other phones but in karbonn a18 google now is working

battery icon changer
Mahesh90901 said:
No we can also do without that only stuff you need is ics rom and armv7 processor and it will work without flashing.Anyway i dont know about other phones but in karbonn a18 google now is working
Click to expand...
Click to collapse
i am trying to change the stock battery icon.
what will happen if i change it and if it doesnt work?
i have backup of systemui.apk
can you tell me?

just backup systemui.apk and framework-res.apk and then u can try!
if anything happens you can always replace with original files!!
btw you can try rom-toolbox pro as well

Velvet.apk does not install
Tried to install velvet.apk but it again and again asks me to replace system application. I guess after changing the name of the file this should not happen, right? Any idea what could be wrong?
Okay it asks me to use a different name when i try changing the name!

sahil kaul said:
Tried to install velvet.apk but it again and again asks me to replace system application. I guess after changing the name of the file this should not happen, right? Any idea what could be wrong?
Okay it asks me to use a different name when i try changing the name!
Click to expand...
Click to collapse
dont install it like any other apk!
paste it in system/app after renaming/deleting the original googlequicksearchbox.apk (which is also found in system/app)
then set permissions!

sahil kaul said:
Tried to install velvet.apk but it again and again asks me to replace system application. I guess after changing the name of the file this should not happen, right? Any idea what could be wrong?
Okay it asks me to use a different name when i try changing the name!
Click to expand...
Click to collapse
Please see the 7th step carefully first you need to change first google search.apk to.apk.bak then try to install the velvet.apk
Just See Seventh Step
Sent from my Karbonn_A18 using xda app-developers app

jainkashish96 said:
dont install it like any other apk!
paste it in system/app after renaming/deleting the original googlequicksearchbox.apk (which is also found in system/app)
then set permissions!
Click to expand...
Click to collapse
No you dont need to do that in this device just rename that googlequicksearchbox.apk with adding .bak at last of the .apk extension and it will work ^^
The steps u told is for armv6 device
Sent from my Karbonn_A18 using xda app-developers app

in recovery,i am getting this error.
E: signature veification failed
install aborted
@ mahesh, we need cwm as soon as possible bro.

Thank you Very Much
I Bought this set yesterday itself and got myself doing the same thing i used to do for a year or so! That is Fiddle with the Boys Toy...
Anyways i Followed this step by step, but somehow the permissions were not staying set.. Then i thought of restarting the phone and Voila the APK got installed! Thank you very much for giving a sneak peak of JB to me! I lost my Nexus s just before JB was announced and since then i was literally frustrated! But all is well for now and sorry for this long and meaning less post! http://forum.xda-developers.com/images/smilies/laugh.gif

Pritesh.mohan said:
in recovery,i am getting this error.
E: signature veification failed
install aborted
@ mahesh, we need cwm as soon as possible bro.
Click to expand...
Click to collapse
Follow the steps
dont install the zip file from recovery it wont work in this mobile.
About the cwm i need to find the drivers of this mobile and it will take time for me cause i need to study go to school and do homeworks any way i try to do my best
Sent from my Karbonn_A18 using xda app-developers app

@mahesh : I was trying to install Google Now following your method. Copied all the files in the specified location and also renamed search.apk to apk.bak, but was not able to install velvet.apk. So restarted the phone and now its directly opening the recovery mod. dont have any backup of the ROM. Can you please help me out???

Mahesh90901 said:
No you dont need to do that in this device just rename that googlequicksearchbox.apk with adding .bak at last of the .apk extension and it will work ^^
The steps u told is for armv6 device
Sent from my Karbonn_A18 using xda app-developers app
Click to expand...
Click to collapse
oops!
sorry!
but in my phone, i did like that only!
mayb it's not necessary in armv7 devices!

Mahesh90901 said:
Follow the steps
dont install the zip file from recovery it wont work in this mobile.
About the cwm i need to find the drivers of this mobile and it will take time for me cause i need to study go to school and do homeworks any way i try to do my best
Sent from my Karbonn_A18 using xda app-developers app
Click to expand...
Click to collapse
100% tested,won' brick the phone.
Pre Reqs-
Firstly install ADB Drivers with help of this post-(URL COPY AND PASTE)
thespicygadgematics.com/2012/05/easily-quickly-install-android-adb.html
After You have finished installing ADB move forward-
-Download the Zip(URL COPY AND PASTE)
doc-0o-b0-docs.googleusercontent.com/docs/securesc/ha0ro937gcuc7l7deffksulhg5h7mbp1/118qm601djttv0sdqau0i3eiqb5bb0dl/1348372800000/16034108961783736367/*/0B7ly9C0AiAYyWEhVQzEtdG9ZeDg?e=download
-Disconnect your phone if already connected to pc
- Download Karbonn A18 phone drivers + ROOTtool zip archive and unrarchive directory on your Computer desktop
- Take your phone and Set USB DEBUGING "ON" in parameters + Set SIM CARD PIN as "OFF" in the security parameters
- Shut down your phone + take out the battery
- Plug phone to computer with USB cable and put battery back
- Windows will find an "Android Phone Preload" and ask you if you want to automatically install drivers, select manual installation and find the drivers in the directory "Karbonn A18" on your desktop.
- When drivers installation succed, UNPLUG the phone and TURN IT ON
- Keep your phone ON and connect it again to your Computer
Run "TPSparkyRoot.bat" file from directory "ROOTtool"
- For every message wich ask you to "click to continue", LET THE PHONE COMPLETELY RESTART ,READ carefully LET THE PHONE COMPLETELY RESTART BEFORE PRESSING CONTINUE
-Process will ask you 3 TIMES and the phone will restart 3 TIMES
After 3rd restart phone is ucessfully rooted.Enjoy
You can check the root with help of Root Checker app from Play Store
this is for rooting, but you can have adb drivers..
modify it and use it.
hit thanx if i helped you...

Pritesh.mohan said:
100% tested,won' brick the phone.
Pre Reqs-
Firstly install ADB Drivers with help of this post-(URL COPY AND PASTE)
thespicygadgematics.com/2012/05/easily-quickly-install-android-adb.html
After You have finished installing ADB move forward-
-Download the Zip(URL COPY AND PASTE)
doc-0o-b0-docs.googleusercontent.com/docs/securesc/ha0ro937gcuc7l7deffksulhg5h7mbp1/118qm601djttv0sdqau0i3eiqb5bb0dl/1348372800000/16034108961783736367/*/0B7ly9C0AiAYyWEhVQzEtdG9ZeDg?e=download
-Disconnect your phone if already connected to pc
- Download Karbonn A18 phone drivers + ROOTtool zip archive and unrarchive directory on your Computer desktop
- Take your phone and Set USB DEBUGING "ON" in parameters + Set SIM CARD PIN as "OFF" in the security parameters
- Shut down your phone + take out the battery
- Plug phone to computer with USB cable and put battery back
- Windows will find an "Android Phone Preload" and ask you if you want to automatically install drivers, select manual installation and find the drivers in the directory "Karbonn A18" on your desktop.
- When drivers installation succed, UNPLUG the phone and TURN IT ON
- Keep your phone ON and connect it again to your Computer
Run "TPSparkyRoot.bat" file from directory "ROOTtool"
- For every message wich ask you to "click to continue", LET THE PHONE COMPLETELY RESTART ,READ carefully LET THE PHONE COMPLETELY RESTART BEFORE PRESSING CONTINUE
-Process will ask you 3 TIMES and the phone will restart 3 TIMES
After 3rd restart phone is ucessfully rooted.Enjoy
You can check the root with help of Root Checker app from Play Store
this is for rooting, but you can have adb drivers..
modify it and use it.
hit thanx if i helped you...
Click to expand...
Click to collapse
Karbonn A18 is already rooted from the factory pack so i dont think anyone will try thqr
Sent from my Karbonn_A18 using xda app-developers app

A18 is pre-rooted
Karbonn A18 is pre-rooted, you just need to install Super User from Google Play.

Mahesh90901 said:
Karbonn A18 is already rooted from the factory pack so i dont think anyone will try thqr
Sent from my Karbonn_A18 using xda app-developers app
Click to expand...
Click to collapse
i know that its for rooting.
you want adb,so this method will also install drivers for the device.
thats what i am trying to say.
i know that the phone is rooted.
i am not stupid.
try and read the whole post next time.

no face unlock?
i was just hanging around with my a18 and found that there was no face unlock option!!!
is it me only or you are also not finding the same?
any ideas??

hey guys...
hi.....i too own a karbonn a18...nd ill have to say that its a great device for such price........
one thing i want to share is that if you guys want to increase your battery life on ur phone.....install the app setcpu...nd then set profiles(eg. det processor at 500mhz when screen is off).....etc.....it does increase your battery life significantly......
any questions are welcomed......
Thakursaab......

Karbonn A15 (Android 4.0.4)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As the name goes this is a development and support thread for Karbonn A15
Which is a re-branded version of K-Touch W719 thanks to ntstatic update.
K-Touch W719
Click to expand...
Click to collapse
Official Page:
Link
Click to expand...
Click to collapse
GSM Arena
Click to expand...
Click to collapse
Review:
GOGI
Click to expand...
Click to collapse
Video Review
Link
Click to expand...
Click to collapse
Drivers (Credit: ntstatic)
Download
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Development
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note :Beyond this point at your own Risk
[Recovery] CWM RECOVERY 5.0.2.8 (Credit: Eklovya) (Special thx to ashishgamer for testing)
Download
Click to expand...
Click to collapse
Stock Boot.img (Credit: ntstatic)
Download
Click to expand...
Click to collapse
Stock Recovery.img (Credit: ntstatic)
Download
Click to expand...
Click to collapse
Wen Zixin 2.2 Recovery Easy Installer (w719)
Download
Click to expand...
Click to collapse
ROOT (Credit: ntstatic)
Link
Click to expand...
Click to collapse
Move Apps to USB Storage (2.5 GB) Partition (Credit : QBANIN)
Link
Click to expand...
Click to collapse
Unbrick Device / W719 Stock ROM / TOOL
Link
Click to expand...
Click to collapse
[ROM] Bee Extravagant 1.0.5
Download
Click to expand...
Click to collapse
[ROM] Tweaked w719 ROM
Download
Click to expand...
Click to collapse
[ROM] [Wen Zixin] card brush W719 ROM 2.53 1.11 Remastered
Download
Click to expand...
Click to collapse
[MOD] Transparent Status Bar
Download
Click to expand...
Click to collapse
[ROM] MIUI ROM
Download
Click to expand...
Click to collapse
[ROM] Stock Nandroid Backup (Credit: nabeeleinstein)
Download
Click to expand...
Click to collapse
[ROM] DarkBoid ROM (Credit: Santo_Rock)
Download
Click to expand...
Click to collapse
[ROM] DarkBoid ROM Tweaked (Credit: sharmad247)
Download
Click to expand...
Click to collapse
[ROM] MIUI (ported) [TEST]
Download
Click to expand...
Click to collapse
[ROM] Backstreet MOD v5.0 alpha [TEST - FAIL] (Credit: The Droid Master)
Download
Click to expand...
Click to collapse
[ROM] bee moving
Download
Click to expand...
Click to collapse
[ROM]STOCK ROM TWEAKED(Credits: sharmad247)
Download
Click to expand...
Click to collapse
[TIP] For Mobiles Stuck at Download / QPST Mode
LINK
Click to expand...
Click to collapse
[MOD] Settings (Credit: 0max)
Download
Click to expand...
Click to collapse
[MOD] Custom Font (Credit: 0max)
Download
Click to expand...
Click to collapse
[MOD] Xperia Z sysbar (Credit: ashishgamer)
Download
Click to expand...
Click to collapse
[TIP] MD 5 Mismatch here is solution (Credit: Kushan.modi)
Download
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thread Rules:
1. No Argument
2. No hate speech
3. No Abuse
4. Respect other members
5. New members to be helped and guided
6. Search before posting
7. Test before posting any ROM,Tweak,Patch,MOD,etc
8. For the rest of rules click HERE
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

[Recovery] CWM Easy Installer
Below is for A87
It should work for A15
But try at your own Risk
Credit: itzmiandy for creating CWM. I have just created an installer.
Created an easy Installer for CWM.
Those who find it difficult for flashing through fastboot.
Steps:
1 Load all drivers on ur pc which we call ADB drivers.
2 Setup fastboot mode on your handset
Setting up fastboot:
Turn Device off
Volume Up button + Power ON button for 10 Sec
This will show fastboot mode is on (Green Color) let go the keys
(If ADB Drivers not installed, kindly do so by checking device manager if it shows some yellow exclamation)
3 Download and install CWM
How to Install CWM?
Extract all files from zip
U will see file named Install CWM.bat.
Run that file and now plug A15 to usb cable (it must be in fastboot mode as we did before)
Follow instructions on the DOS screen to make it load CWM recovery.
Your Mobile will reboot after installation is finished
Download
Click to expand...
Click to collapse
Click to expand...
Click to collapse

prasad12ka4 said:
Below is for A87
It should work for A15
But try at your own Risk
Credit: itzmiandy for creating CWM. I have just created an installer.
Created an easy Installer for CWM.
Those who find it difficult for flashing through fastboot.
Steps:
1 Load all drivers on ur pc which we call ADB drivers.
2 Setup fastboot mode on your handset
Setting up fastboot:
Turn Device off
Volume Down button + Power ON button for 10 Sec
This will show fastboot mode is on.
(If ADB Drivers not installed, kindly do so by checking device manager if it shows some yellow exclamation)
3 Download and install CWM
How to Install CWM?
Extract all files from zip
U will see file named Install CWM.bat.
Run that file and now plug A15 to usb cable (it must be in fastboot mode as we did before)
Follow instructions on the DOS screen to make it load CWM recovery.
Your Mobile will reboot after installation is finished
Click to expand...
Click to collapse
Im so keen to install a CWM mod, but cant do that until i have a backup of stock recovery

ntstatic said:
Im so keen to install a CWM mod, but cant do that until i have a backup of stock recovery
Click to expand...
Click to collapse
Yup
First we need to have stock Recovery Image then only we can try this.
Well came across this strange issue.
When I installed MX player 720 p videos HD ones in .avi format played flawless with this HW+ codec of Mx player.
But it crashed my
settings>sound section
whenever I went there it force stopped.
Factory reset was only solution I had
Has anyone else experienced it?

help
Hey bro,
Saw ur work for micromax a87 ... I was also a a87 user before but got some problem in it so i bought new karbonn a11..
I m not developer (dont know anything bout developing) but some how i made a dump of my phone's rom..
Just wanna request u if u can help in developing my phone's rom..... No deceloper working for this phone :'( ..pls help if u can..
dropbox.com/sh/y3pe4nhhyo2teor/btCYQKxS-Q here's the link for dump rom....
Thanks in advance...

what problem you have with a87?

032145 said:
what problem you have with a87?
Click to expand...
Click to collapse
Low RAM is he biggest issue of A87

[UNROOT] Unverified Method using ADB
adb start-server
adb remount
adb shell chmod 0777 /system/xbin/su
adb shell chmod 0777 /system/bin/su
adb shell chmod 0777 /system/app/Superuser.apk
adb shell chmod 0777 /system/xbin/busybox
adb shell rm -r /system/app/Superuser.apk
adb shell rm -r /system/xbin/su
adb shell rm -r /system/bin/su
adb shell rm -r /system/xbin/busybox
adb reboot
exit
Or simple try the app in below link:
UNROOT

CWM installation
As A5 was w619
So is A15 w719
So we can try using the following method and recovery to install.
Link

Enter Recovery Mode (Stock)
1. Power off the device.
2. Press Vol Up + Power key
3. Keep pressed when green screen comes (fastboot)
4. Later Red screen (recovery)
5. Let go the keys.
Here you get various factory reset menu buttons.

prasad12ka4 said:
1. Power off the device.
2. Press Vol Up + Power key
3. Keep pressed when green screen comes (fastboot)
4. Later Red screen (recovery)
5. Let go the keys.
Here you get various factory reset menu buttons.
Click to expand...
Click to collapse
that is excellent
thank you so much. we are almost on the verge of completing the second step
1. root
2. recovery
3. roms - im not so keen on these unless they can provide something fantastic

ntstatic said:
that is excellent
thank you so much. we are almost on the verge of completing the second step
1. root
2. recovery
3. roms - im not so keen on these unless they can provide something fantastic
Click to expand...
Click to collapse
ICS that we have is Damn stable
If looking for CM9 its not impossible but doubtful
We must look for CM10 or JB ROM
BTW updated your links on 1st page 1st post for those willing to test stock recovery and boot

can we use mobile uncle tool to flash recovery or sp flash tool

nileshtambe said:
can we use mobile uncle tool to flash recovery or sp flash tool
Click to expand...
Click to collapse
Which tool exactly are you talking about friend?

prasad12ka4 said:
Which tool exactly are you talking about friend?
Click to expand...
Click to collapse
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5tb2JpbGV1bmNsZS50b29sYm94Il0.
all use this to flash recovery in mtk phones

nileshtambe said:
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5tb2JpbGV1bmNsZS50b29sYm94Il0.
all use this to flash recovery in mtk phones
Click to expand...
Click to collapse
This isnt an MTK based handset
This is using qualcomm processor

nileshtambe said:
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5tb2JpbGV1bmNsZS50b29sYm94Il0.
all use this to flash recovery in mtk phones
Click to expand...
Click to collapse
hi nilesh welcome - we do know each other from the spice 350 thread.
i had the same thought and i did try loading mobile uncle, and it does run but engineering mode is disabled
other functions may still work but i have not tried
to flash recovery you must start the phone in fastboot mode
download and extract the contents of this file to a directory (you may require jdk - if required download from the start of this thread)
fastboot erase recovery --------------------------to erase the recovery partition
fastboot flash recovery recovery.img --------------------------to flash the recovery image
fastboot reboot --------------------------to reboot the phone
remember we do not have a working clockwork mod recovery for this phone ...... yet

ntstatic said:
hi nilesh welcome - we do know each other from the spice 350 thread.
i had the same thought and i did try loading mobile uncle, and it does run but engineering mode is disabled
other functions may still work but i have not tried
to flash recovery you must start the phone in fastboot mode
download and extract the contents of this file to a directory (you may require jdk - if required download from the start of this thread)
fastboot erase recovery --------------------------to erase the recovery partition
fastboot flash recovery recovery.img --------------------------to flash the recovery image
fastboot reboot --------------------------to reboot the phone
remember we do not have a working clockwork mod recovery for this phone ...... yet
Click to expand...
Click to collapse
BTW our handset is not mTK based
This tool is for those mobiles only

add this please
prasad12ka4 said:
As the name goes this is a development and support thread for Karbonn A15
Which is a re-branded version of K-Touch W719 thanks to ntstatic update.
Official Page:
Review:
Video Review
Drivers (Credit: ntstatic)
Facebook Group
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Development
Note :Beyond this point at your own Risk
Stock Boot.img (Credit: ntstatic)
Stock Recovery.img (Credit: ntstatic)
ROOT
Move Apps to USB Storage (2.5 GB) Partition (Credit : QBANIN)
Click to expand...
Click to collapse
can you add my karbonn a15 group
facebook.com/groups/SmartA15

Check This:
Link

Symphony w25 / ktouch w650 / mobistar s01 / karbonn a7 ICS Upgrade tutorial.

Always remember to BACKUP your SYSTEMs NANDROID BACKUP with CWM. * I am really not responsible for any damage to your phone; it’s all upon your responsibility. *Let me know if any edit is recommended by you.
Full tutorial is also available on my blog : iamrainwalker
Ahh! I love my ICS rom and my symphony w25. I am a perfectionist, so I took my time to study and gone throw lots of trials and errors to finalize the ICS rom. Thanks to all those Brilliant senior developers from XDA for their numerous helps and tips. I will start by providing some screenshot of the ICS rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Beautiful isn’t it? Now let’s start. Just make sure you read and follow everything I say from now. Upgrading process is divided in 3 steps actually:
Updating Baseband
Flashing AP(Factory) ROM
Flashing Finalized NANDROID ROM.
YOU MUST FOLLOW ALL STEPS ONE BY ONE, DO NOT DO ANYTHING YOU DON’T KNOW, IF YOU ARE A TOTAL NEWBIE, THIS IS NOT FOR YOU KIDDO. DON’T BLAIM ME FOR YOUR MISTAKES.
ICS_Stable_sw25_rom Featurs :
Fully Rooted
Updated SU and Busybox binaries
Init.d Support, busybox runpart
App2SD enabled
Super Fast
All Sensors working
Better Battery Life
Better Network Reception
ALL new Jelly Bean keyboard
Cracked PowerAmp Music Player
Added
And many other tweaks I can’t remember right now.
* Points to be noted
You need to enable or disable Gsensor from Settings > Display by your self, Status ber shortcut don’t work.
You need to set APN manually from Settings > More > Mobile Networks > Select Subscription > Manage Card
System is already configured for Bangladeshi Users.
Download all Files Listed below :
AP_BP_FOR_ICS_S01
o (AP+BP)_ICS_S01.7z.001 – http://www.mediafire.com/?5v5qkcd4viag8vi
o (AP+BP)_ICS_S01.7z.002 – http://www.mediafire.com/?mahtazx3jrbprtr
ASDK_Files
o installer_r20.0.3-windows.exe – http://www.mediafire.com/?p57ix4v80c3yf8f
o jdk-7-windows-i586.exe – http://www.mediafire.com/?rejrjk6rjjbq5d9
Drivers
o S01_Drivers.7z – http://www.mediafire.com/?wjhalczqtg7k1c1
S01_Flash_tools
o S01_flash_tools.7z – http://www.mediafire.com/?6mzx0bqrd6oubo7
Symphony_ICS_stable_1
o clockworkmod_rainwalker.7z.001 – http://www.mediafire.com/?uzw25cq5bk1omn4
o clockworkmod_rainwalker.7z.002 – http://www.mediafire.com/?242vkhkfi3noekc
CWM for S01
o CWM-English.rar – http://www.mediafire.com/?y0e31h55qurp3y7
7zip
o http://www.7-zip.org/
File Extraction :
Download all files in a folder like this location “F:\sym_ics\SYMICS4\”
Select files like this photo and Use 7zip to Extract.
Make use you have folders Extracted like this
Updating Baseband :
This process is pretty nasty. I made a successful Update after trying a number of times and fails, after that I installed WINDOWS XP SP3 and successfully Updated Baseband. So I would recommend you guys to Start this Upgrading Process with a Freshly Installed Windows XP. I will try to give you as much as possible visual guide.
*It is not mandatory to install Android SDK and Java Runtime.
Install “jdk-7-windows-i586.exe”
Install “installer_r20.0.3-windows.exe” , make sure you have selected options red marked in this photo when Android SDK download files.
After download complete, Go to “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01” This folder.
Extract “NPRG7627A.zip” by right clicking it 7-zip > Extract Here
Copy “NPRG7627A.hex” to “591357_8376_WCDMA_V0005” folder.
Switch off your phone, remove battery, SIM cards, SD card.
Place battery on your phone, Hold POWER BUTTON+VOLUME DOWN BUTTON together, you will see “QPST Entry Download”.
Now, Connect your phone to your pc.
You will see a popup like this, cancel it.
Go to your device manager and follow the procedure below :
For you the driver location will be “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\HK11-VB717-27\HK11-VB717-27_1.0.56\Win32\x86\free”, Click Ok, and press Next. Driver will be installed. Close it. Go to device manager and you will see something like this :
In my case i got COM3, you may have diffrent port number. Now go to “F:\sym_ics\SYMICS4\S01_flash_tools\fast_boot” and Open “fastboot1.0.2.4.exe”. You will see something like this :
Click on “BP Browse” select folder “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\591357_8376_WCDMA_V0005″, Put the port number on “BP Port”, take a deep breath and press Download, download should start if everthing is allright, after download compleate “fastboot1.0.2.4.exe” will close by itself. and you need to pull your phone bettery to shut it down and disconnect the phone form your pc.
AP Upload :
Place your phone battery on the phone, press POWER BUTTON + VOLUME UP and wait untill you see a GREEN display on your phone.
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb_driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
Click on “SEL PATH” button and select “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\TBW591357_9999_V0001_2″ folder click ok. you will see :
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
Flashing Finalized Stable NANDROID ROM :
Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.
Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.
Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.
Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.
Helpful Links :
Driver Installation Video : https://vimeo.com/55837968
Another Baseband Update Guide : http://forum.xda-developers.com/showthread.php?t=2036053
XDA foram Thread : http://forum.xda-developers.com/showthread.php?t=1788936
Rooting Symphony w25 : http://forum.xda-developers.com/showthread.php?t=1818146
Thanks From the deepest corner of my heart to :
prasad12ka4 , ahmed.zunaid , vinodkbishnoi (for poviding stability of the rom) & all tose person who helped me for this achivement

rainwalker said:
Always remember to BACKUP your SYSTEMs NANDROID BACKUP with CWM. * I am really not responsible for any damage to your phone; it’s all upon your responsibility. *Let me know if any edit is recommended by you.
Full tutorial is also available on my blog : iamrainwalker
Ahh! I love my ICS rom and my symphony w25. I am a perfectionist, so I took my time to study and gone throw lots of trials and errors to finalize the ICS rom. Thanks to all those Brilliant senior developers from XDA for their numerous helps and tips. I will start by providing some screenshot of the ICS rom.
Beautiful isn’t it? Now let’s start. Just make sure you read and follow everything I say from now. Upgrading process is divided in 3 steps actually:
Updating Baseband
Flashing AP(Factory) ROM
Flashing Finalized NANDROID ROM.
YOU MUST FOLLOW ALL STEPS ONE BY ONE, DO NOT DO ANYTHING YOU DON’T KNOW, IF YOU ARE A TOTAL NEWBIE, THIS IS NOT FOR YOU KIDDO. DON’T BLAIM ME FOR YOUR MISTAKES.
ICS_Stable_sw25_rom Featurs :
Fully Rooted
Updated SU and Busybox binaries
Init.d Support, busybox runpart
App2SD enabled
Super Fast
All Sensors working
Better Battery Life
Better Network Reception
ALL new Jelly Bean keyboard
Cracked PowerAmp Music Player
Added
And many other tweaks I can’t remember right now.
* Points to be noted
You need to enable or disable Gsensor from Settings > Display by your self, Status ber shortcut don’t work.
You need to set APN manually from Settings > More > Mobile Networks > Select Subscription > Manage Card
System is already configured for Bangladeshi Users.
Download all Files Listed below :
AP_BP_FOR_ICS_S01
o (AP+BP)_ICS_S01.7z.001 – http://www.mediafire.com/?5v5qkcd4viag8vi
o (AP+BP)_ICS_S01.7z.002 – http://www.mediafire.com/?mahtazx3jrbprtr
ASDK_Files
o installer_r20.0.3-windows.exe – http://www.mediafire.com/?p57ix4v80c3yf8f
o jdk-7-windows-i586.exe – http://www.mediafire.com/?rejrjk6rjjbq5d9
Drivers
o S01_Drivers.7z – http://www.mediafire.com/?wjhalczqtg7k1c1
S01_Flash_tools
o S01_flash_tools.7z – http://www.mediafire.com/?6mzx0bqrd6oubo7
Symphony_ICS_stable_1
o clockworkmod_rainwalker.7z.001 – http://www.mediafire.com/?uzw25cq5bk1omn4
o clockworkmod_rainwalker.7z.002 – http://www.mediafire.com/?242vkhkfi3noekc
CWM for S01
o CWM-English.rar – http://www.mediafire.com/?y0e31h55qurp3y7
7zip
o http://www.7-zip.org/
File Extraction :
Download all files in a folder like this location “F:\sym_ics\SYMICS4\”
Select files like this photo and Use 7zip to Extract.
Make use you have folders Extracted like this
Updating Baseband :
This process is pretty nasty. I made a successful Update after trying a number of times and fails, after that I installed WINDOWS XP SP3 and successfully Updated Baseband. So I would recommend you guys to Start this Upgrading Process with a Freshly Installed Windows XP. I will try to give you as much as possible visual guide.
*It is not mandatory to install Android SDK and Java Runtime.
Install “jdk-7-windows-i586.exe”
Install “installer_r20.0.3-windows.exe” , make sure you have selected options red marked in this photo when Android SDK download files.
After download complete, Go to “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01” This folder.
Extract “NPRG7627A.zip” by right clicking it 7-zip > Extract Here
Copy “NPRG7627A.hex” to “591357_8376_WCDMA_V0005” folder.
Switch off your phone, remove battery, SIM cards, SD card.
Place battery on your phone, Hold POWER BUTTON+VOLUME DOWN BUTTON together, you will see “QPST Entry Download”.
Now, Connect your phone to your pc.
You will see a popup like this, cancel it.
Go to your device manager and follow the procedure below :
For you the driver location will be “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\HK11-VB717-27\HK11-VB717-27_1.0.56\Win32\x86\free”, Click Ok, and press Next. Driver will be installed. Close it. Go to device manager and you will see something like this :
In my case i got COM3, you may have diffrent port number. Now go to “F:\sym_ics\SYMICS4\S01_flash_tools\fast_boot” and Open “fastboot1.0.2.4.exe”. You will see something like this :
Click on “BP Browse” select folder “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\591357_8376_WCDMA_V0005″, Put the port number on “BP Port”, take a deep breath and press Download, download should start if everthing is allright, after download compleate “fastboot1.0.2.4.exe” will close by itself. and you need to pull your phone bettery to shut it down and disconnect the phone form your pc.
AP Upload :
Place your phone battery on the phone, press POWER BUTTON + VOLUME UP and wait untill you see a GREEN display on your phone.
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb_driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
Click on “SEL PATH” button and select “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\TBW591357_9999_V0001_2″ folder click ok. you will see :
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
Flashing Finalized Stable NANDROID ROM :
Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.
Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.
Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.
Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.
Helpful Links :
Driver Installation Video : https://vimeo.com/55837968
Another Baseband Update Guide : http://forum.xda-developers.com/showthread.php?t=2036053
XDA foram Thread : http://forum.xda-developers.com/showthread.php?t=1788936
Rooting Symphony w25 : http://forum.xda-developers.com/showthread.php?t=1818146
Thanks From the deepest corner of my heart to :
prasad12ka4 , ahmed.zunaid , vinodkbishnoi (for poviding stability of the rom) & all tose person who helped me for this achivement
Click to expand...
Click to collapse
Thx for your hardwork but plz remove power amp
Its a paid app and adding it into a rom is against forum rules.
You may banned for this if moderator would see.
Sent from my Spice Mi-355 using xda app-developers app

rjunraj said:
Thx for your hardwork but plz remove power amp
Its a paid app and adding it into a rom is against forum rules.
You may banned for this if moderator would see.
Sent from my Spice Mi-355 using xda app-developers app
Click to expand...
Click to collapse
Thank you for letting me know, i will remember this at my next releases.

splash.img - change
Hello Rainwalker, Thank you for this thread, I have updated ICS in my W25. But I want to know, Is there any chance to replace/change "Mobistar" boot splash image. if would please let us know. thanks again for you hard work.

raj_onu said:
Hello Rainwalker, Thank you for this thread, I have updated ICS in my W25. But I want to know, Is there any chance to replace/change "Mobistar" boot splash image. if would please let us know. thanks again for you hard work.
Click to expand...
Click to collapse
Yes, it is possible, my new rom will have a new splash image. i will post a procedure about changing spalsh image soon.

rainwalker said:
Yes, it is possible, my new rom will have a new splash image. i will post a procedure about changing spalsh image soon.
Click to expand...
Click to collapse
Thanks, I will be waiting for that..

I have a big problem in this part:
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
something go wrong and dont complete the action so the result is now even if a try start from dyhe begin dont work now give error im step to download....and can do anything more...
Can you help me please...
Thanks
I already try to get in bootloader green screen and after red to put a normal rom but broken in red dont go more than that....

sfmteixeira said:
I have a big problem in this part:
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.
something go wrong and dont complete the action so the result is now even if a try start from dyhe begin dont work now give error im step to download....and can do anything more...
Can you help me please...
Thanks
I already try to get in bootloader green screen and after red to put a normal rom but broken in red dont go more than that....
Click to expand...
Click to collapse
It would be great if you can send me a screenshot. i need to know what error exactly occurs? and what os do you use?

Problem starts here
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb _driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
The device says is not possible to install before i even put the drivers dont reconice any android device and than in the upload starts ok but in the firt step of getting device give error.
After that i try make all again but dont be able to make download and nothing more in the steps you said.
Sorry and thanks for help

sfmteixeira said:
Problem starts here
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb _driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
The device says is not possible to install before i even put the drivers dont reconice any android device and than in the upload starts ok but in the firt step of getting device give error.
After that i try make all again but dont be able to make download and nothing more in the steps you said.
Sorry and thanks for help
Click to expand...
Click to collapse
which operating system do you use? did your BP download was successful? try rebooting your computer the get into fastboot mod on your phone, connect your phone to computer, if you don't see anything then go and see in device manager, if you see there are some yellow unrecognized devices then install them.

I use seven! If i enter in fastboot (green) apear unkow device only and i already try the drivers you oput but nothing happen! I have another pc with 8 do you think if a do all steps can result?
---------- Post added at 05:15 AM ---------- Previous post was at 05:08 AM ----------
If a tur on my phone normaly apearce your logo and stay stock....but the pc recognice as Android as Android composite ADB Interface....

Finally i was able in other pc but there is a problem!
This part i cant do it
Flashing Finalized Stable NANDROID ROM :
Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.
Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.
Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.
Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.
How can i do for have root and make the recovery you said to have a stable ICS?
Because im not superuser, i dont have portuguese language and im not able to configure the apn for have internet in the phone!
Sorry again but if you can help!
Thanks a lot
Regards

you dont need to be a superuser to flah cwm. flash cwm by following the procedure i have wrote. then flash the clockworkmod file. u just need to flash cwm. i have already posted my new update on this rom. see my blogs latest post.
Sent from my Symphony W25

rainwalker said:
you dont need to be a superuser to flah cwm. flash cwm by following the procedure i have wrote. then flash the clockworkmod file. u just need to flash cwm. i have already posted my new update on this rom. see my blogs latest post.
Sent from my Symphony W25
Click to expand...
Click to collapse
I already try do step by step all you said...but the last i was not able so i do this:
Install room manager and make Select “Restore”
Select “ICS_W25_Stable and all ok!
But i still with same problems:
Only English language dont have portugese
And the CWM recovery i think is with problems:
Because dont have all the things
Apearce like this:
Android system recovery (3e)
rebbot system now
apply update from external store
wipe data/factory reset
wipe cache partition
apply update from cache
and no more funcions as you show in your images
I think some goes wrong in this part thats why i can put any more rom
Sorry again but please help me

sfmteixeira said:
I already try do step by step all you said...but the last i was not able so i do this:
Install room manager and make Select “Restore”
Select “ICS_W25_Stable and all ok!
But i still with same problems:
Only English language dont have portugese
And the CWM recovery i think is with problems:
Because dont have all the things
Apearce like this:
Android system recovery (3e)
rebbot system now
apply update from external store
wipe data/factory reset
wipe cache partition
apply update from cache
and no more funcions as you show in your images
I think some goes wrong in this part thats why i can put any more rom
Sorry again but please help me
Click to expand...
Click to collapse
CWM is Clockworkmod Recovery, it's a recovery replacement of stock recovery. the procedure is told is how to install CWM by replacing Stock recovery, if you have successfully flashed "ICS_W25_Stable" you already should have CWM on your system. try by pressing VOL UP + Power and hold untill Red display showes up. I am sorry i can't help you with Language support. But if you don't install CWM on your system then you wont be able to update new roms.

rainwalker said:
CWM is Clockworkmod Recovery, it's a recovery replacement of stock recovery. the procedure is told is how to install CWM by replacing Stock recovery, if you have successfully flashed "ICS_W25_Stable" you already should have CWM on your system. try by pressing VOL UP + Power and hold untill Red display showes up. I am sorry i can't help you with Language support. But if you don't install CWM on your system then you wont be able to update new roms.
Click to expand...
Click to collapse
I do all steps you said all goes ok! Only the step to make download in flash starts and then gives error, but after all steps ok! Bur the recovery stills the same the normal recovery with 5 option i said before!
The only way i put the "ICS_W25_Stable" it was from the rom manager i installed...
I dont understand what is happen...

Sd card space running out
hi,
i did everything like you posted.
using the rom since 3-4 days.
i have some issues.
1) internal memory is always low.i do not have anyrhing installed .(21 mb free)
2) when i try to download an app from play store,it says that sd cars apace running out and the download fails.
3) i have link2sd and 1gb ext2 partiotin in sd card. total sd size is 8 gb. 1.2 gb is empty at the moment.
pls give me a solution for this.
i really like the rom.
great battery performance.
if you could help me with the memory issue,then it will be awesome.
thanx

Pritesh.mohan said:
hi,
i did everything like you posted.
using the rom since 3-4 days.
i have some issues.
1) internal memory is always low.i do not have anyrhing installed .(21 mb free)
2) when i try to download an app from play store,it says that sd cars apace running out and the download fails.
3) i have link2sd and 1gb ext2 partiotin in sd card. total sd size is 8 gb. 1.2 gb is empty at the moment.
pls give me a solution for this.
i really like the rom.
great battery performance.
if you could help me with the memory issue,then it will be awesome.
thanx
Click to expand...
Click to collapse
Reset To factory settings, then start using link2sd. internal memory shows low because of preinstalled apps. you can use my 3rd updated rom "OPSHORA". this one is best. i personally use this rom. but you need to follow all procedures step by step. but you don't need to update Baseband again. OPSHORA rom has some Blue screen issue sometime, but removeing your battery will fix it.

Headphone Sound Problem
Hi Rainwalker, I have an problem with headphone sound. When I playing a song, normally it's ok but, after plugin headphone, headphone sound is too poor. Please help me out of this issue.

raj_onu said:
Hi Rainwalker, I have an problem with headphone sound. When I playing a song, normally it's ok but, after plugin headphone, headphone sound is too poor. Please help me out of this issue.
Click to expand...
Click to collapse
which music application do you use? chk sound settings, and equalizer settings.

[How To] Install CWM Recovery on A3000 [Noob Friendly]

Original work found in THIS very important thread [very powerful & useful app: MTK Droid Root & Tools] by xda developer rua1.
also this post by oscarblue48 is very helpful and it has detailed pictures of the steps
Follow these steps on your own responsibility...
How to install CWM Recovery on A3000:
00. Make sure your device is rooted... if not.. install [framroot] from Here and root.
01. Download MTK Droid Tools from Here and extract.
02. Download Drivers from Here [thanks to azam426] OR Here [thanks to rua1] and extract.
03. On your PC > Right click on my computer > Manage > Device Manager [from the list on the left ]
04. Run MTKdroidTools.exe
05. Connect your A3000 to your computer. (Powered ON)
06. Quickly double click the unidentified driver that pops in the Device Manager > update driver > and point to the extracted drivers from step 2
07. On MTKdroidTools > there is a color indicator in the bottom left corner > [if yellow > Press the root button] & [if green > go to the next step].
08. Now click on [root,backup,recovery] > select [to use boot from phone] > click [recovery and boot] the app will start reading your device's original recovery.
09. After a while it will ask you [make cwm recovery automatically] > click [yes]
10. After another while it will ask you [install created recovery to phone] > click [yes]
11. After a third while it will ask you [reboot into recovery] > click [yes]
Congratulations now you have CWM on your device..

Any idea what the bootpatch.IMG is for I said no to it as wasnt sure
Maybe you didn't get option after make cwm recovery. As I used kingoandroid root
I also tried the delete China option in recovery section. Only found three things to delete but rebooted fine
Sent from my GT-I9100 using XDA Premium HD app

I followed step by step the instruction, but strange my device always give a blue color in the left bottom, even after I rooted the device by Framaroot.

thank u for your tutorials

Do you know Flashify.apk?I think this is a simple methods to flash recovery to the pad~
I've tried~ it‘s can be successful~

:good::good::good::good::good: Thanx alot it works :good::good::good::good::good:

Ubuntu?
hosamn said:
Original work found in THIS very important thread [very powerful & useful app: MTK Droid Root & Tools] by xda developer rua1.
also this post by oscarblue48 is very helpful and it has detailed pictures of the steps
Follow these steps on your own responsibility...
How to install CWM Recovery on A3000:
00. Make sure your device is rooted... if not.. install [framroot] from Here and root.
01. Download MTK Droid Tools from Here and extract.
02. Download Drivers from Here [thanks to azam426] OR Here [thanks to rua1] and extract.
03. On your PC > Right click on my computer > Manage > Device Manager [from the list on the left ]
04. Run MTKdroidTools.exe
05. Connect your A3000 to your computer. (Powered ON)
06. Quickly double click the unidentified driver that pops in the Device Manager > update driver > and point to the extracted drivers from step 2
07. On MTKdroidTools > there is a color indicator in the bottom left corner > [if yellow > Press the root button] & [if green > go to the next step].
08. Now click on [root,backup,recovery] > select [to use boot from phone] > click [recovery and boot] the app will start reading your device's original recovery.
09. After a while it will ask you [make cwm recovery automatically] > click [yes]
10. After another while it will ask you [install created recovery to phone] > click [yes]
11. After a third while it will ask you [reboot into recovery] > click [yes]
Congratulations now you have CWM on your device..
Click to expand...
Click to collapse
Hi
I'm a noob
Kindly advise if I will be able to do all this using my Ubuntu laptop?
Thanks

Very good method...
Thanks
Sent from my Lenovo A3000-H using Tapatalk

thanks
but i have a question
which one is better?
CWM or TWRP

why did i got Fake Hardware in kernel or firmware doesn't correspond to phone! on my a3000?

thanks
Man ,
really really big thanks i was tired from searching for a CWM really you are awsome

My A3000 is not recognised by MTK Droid Tools ...
Downloaded drivers v1.2 zip file and extracted.
Downloaded MTK Droid Tools v2.5.3 zip file and extracted.
And, followed exactly, as given in the write up (page 1 of this topic).
A3000 sensed in Device Manager and displayed. 2 Drivers got updated.
However, MTK droid tools is NOT SENSING the device.
It still says "the device isn't revealed. Connect or reconnect a cable" on the bottom most line of the
MTK droid tools window and the small box is blank. The status continues, even after the A3000 is
rebooted or the USB cable is removed and reconnected.
What to do now ?
My A3000 is already a rooted device with Framaroot.
Any guidance ?

Just flash my CWM v6 (can be found in the original development section). It's easier to install and up-to-date. Use mobileuncle tools to flash it.
Gesendet von meinem Xperia S mit Tapatalk

Thanks a lot .... CWM installed ... But, lost ROOT ...
Thanks to this wonderful step-by-step guide, I have successfully
installed CWM on my new A3000. :laugh:
Taken a full backup by using CWM and saved it on SD Card.
But, the flip side is that the device is now NOT ROOTED.
When I run the Root Checker, it says `Sorry ! This deice does not
have proper root access.'
How to get the root back ?
I have tried Framaroot option (like I did it for the first time), but
still no luck in rooting it again.
Any ideas ?

ROOT restored ...
As I said earlier, after successful installation of CWM Recovery, my A3000 lost it's ROOT.
After a lot of experimentation and uninstalls/installs, I am able to get back the ROOT.
Uninstalled ROM Manager and Super User. Disabled Root Explorer, MobileuncleTools and
another Superuser. Also uninstalled new version of Framaroot and installed an old version.
And, separately installed SuperSU.

I follow the steps and I installed CWM and I backed up my device, after some days I wanted to restore my backup, but when it finished, nothing was recovered but original ROM and apps like factory reset !!! what the hell ?!?!

lenovo a3000
hosamn said:
Original work found in THIS very important thread [very powerful & useful app: MTK Droid Root & Tools] by xda developer rua1.
also this post by oscarblue48 is very helpful and it has detailed pictures of the steps
Follow these steps on your own responsibility...
How to install CWM Recovery on A3000:
00. Make sure your device is rooted... if not.. install [framroot] from Here and root.
01. Download MTK Droid Tools from Here and extract.
02. Download Drivers from Here [thanks to azam426] OR Here [thanks to rua1] and extract.
03. On your PC > Right click on my computer > Manage > Device Manager [from the list on the left ]
04. Run MTKdroidTools.exe
05. Connect your A3000 to your computer. (Powered ON)
06. Quickly double click the unidentified driver that pops in the Device Manager > update driver > and point to the extracted drivers from step 2
07. On MTKdroidTools > there is a color indicator in the bottom left corner > [if yellow > Press the root button] & [if green > go to the next step].
08. Now click on [root,backup,recovery] > select [to use boot from phone] > click [recovery and boot] the app will start reading your device's original recovery.
09. After a while it will ask you [make cwm recovery automatically] > click [yes]
10. After another while it will ask you [install created recovery to phone] > click [yes]
11. After a third while it will ask you [reboot into recovery] > click [yes]
Congratulations now you have CWM on your device..
Click to expand...
Click to collapse
good day sir's, i tried the following instruction but it cant update the drivers....how can i do sir..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Olivier said:
Just flash my CWM v6 (can be found in the original development section). It's easier to install and up-to-date. Use mobileuncle tools to flash it.
Gesendet von meinem Xperia S mit Tapatalk
Click to expand...
Click to collapse
where can i find mobile uncle tool english?

Is there a way to do it without computer?
Sent from my IdeaTab A3000-F using XDA Free mobile app

Hi, i have Vodafone Smart tab 3, which is based Lenovo A3000-H, only with different rom. I want to backup Vodafone rom so i can flash it and send to technical service if device have any fault.
So i tried this way to have a backup, i need a full backup on my computer to flash it later so i clicked "Backup" button, but i get a warning, title is: "ATTENTION THE SD card isn't found!" and below it there's a message says: "System and userdata won't backup! To continue?"
What's this, do i need an SD card? I can see system folder in my backup folder. And how can i understand my backup is working? In our local forum, somebody says backup needs to be around 1.3gb but mine is only 1.18gb.
What can i do for this? I'm waiting your opinions.

[REVIEW & GUIDE] Custom Firmware on Lumia 950XL V2

Hi,
I found a custom firmware for Lumia 950XL and it might be helpful for the users who still use Lumia 950XL
I will give you my review based on my test and the steps if you want to do the same.
Thanks to:
Fadil Fadz
gus33000
WojtasXda
If the topic already posted let me know I tried to search before posting.
Should you replace your firmware with this?
Yes, yes and yes..
The system is way better than the current firmware.
Pros:
Built-in updated apps like (Paint 3D, myTube, 8 Zip...etc)
Built-in CMD (Real CMD)
You can run (.bat) files
Updated original apps like (Video, Photos, Camera..etc)
I feel it lighter (maybe because I like it)
Unlocked by default
Boot menu contains developer options
File Explorer is updated and more advanced (you can access to the packages directly from it)
Display Scale option (You can control the display scale from the control panel)
Nice organize for Start menu (the way that Fadil organize the menu will give you an idea to build nice structure for the apps)
You can install advanced apps using CMD like (Powershell, XAP installer, DotNet Console..etc)
Nice icons for the default apps
Cons & Tips:
So far I didn't find anything bad
Some icons will appear smaller than before because of the default display scale 100% (for me it's was more than normal), but you can change it form the control panel
InteropTools is Beta (there is Legacy version so I prefer to replace it)
You have to be patience with edgeTile if you want to use it , it's too slow when loading for no reason
CMD with external keyboard is better for some functions and easier to use (use left arrow to remove).
Screenshots (100% display scale):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to install:
AS PER FADIL
DISCLAIMER:
I’m not responsible for any damage that occur on you device.
Do at your own risk.
WARNING ⚠:
Please don’t attempt to flash on other devices.
Please don’t flash without using thor2.
Flashing FFU will erase all your data.
Please ensure that you closed WPinternals before using thor2.
Videos always better and more clear (but read the Quick Guide below if this is your first time)
Features & Custom FFU: Click Here (Youtube)
Installing & Downloads: Click Here (Youtube)
Install Apps using CMD: Click Here (Youtube)
Tools Needed:
WPinternals 2.9 (2nd Video "Installing & Downloads")
WDRT ( Windows Device Recovery Tool) to use thor2 (2nd Video "Installing & Downloads")
Custom FFU (1st Video "Features & Custom FFU")
Quick Guide:
Download the requested tools
Connect your Phone using the USB cable
Phase 1 (Unlock bootloader):
Before start unlocking you have to download
FFU-file
Emergency-files
1- Open "WPinternals"
A- Download FFU + Emergency Files
Goto "Download"
Scroll down then click "Search"
After the results appear Click "Download All"
It will take some time to download
If you already have the files scroll to "Repository"
Click on "Add Existing FFU-file"
Select your file
B- Unlock bootloader
Goto "Unlock bootloader"
Click "OK" to switch to "Flash-mode"
When the phone in "Flash-mode", scroll down and click "Unlock" after reading the descriptions
Multiple reboots expected so you have to wait and don't interrupt the process
Wait until you see this message "You need to manually reset your phone now!"
Restart the phone
Wait until you see this message "Bootloader unlocked successfully"
If the phone already unlocked expected to boot to Mass storage instead of this message
Know Problems
if stuck into Multiple reboots for too long time or you got "Unlock failed", this could happen because of:
You didn't select FFU-file and Emergency-files
The FFU-file is different than the current system (maybe you flashed different one before)
If you bricked the system do the following:
Boot into Flash-Mode by pressing Power + Volume Down once the phone vibrate hold only Volume Down
Then open WDRT for possible restore
If WDRT didn't help check the post below for alternate restore option
https://forum.xda-developers.com/t/bricked-950xl.3990253/#post-83830313
C- Switch to Flash-mode
Goto "Manual mode"
Select "Switch to Flash-mode"
Wait until the phone get in the "Flash-mode"
Now close "WPinternals"
Phase 2 (Install the Custom Firmware)
Before flashing if you aware about your files and not sure about the process
Check "Backup Solution" at the end of this post
Open "WDRT" folder
Click on "File" at the top left of the window
Select Open PowerShell
Select Open As Administrator
Now run the following command:
.\thor2 -mode uefiflash -ffufile "D:\Microsoft.MSM8994.P6211_CITYMAN_10.0.15254.547_v2.ffu"
"D:\.." is an example, use your own location
Press Enter
Wait until the process complete
Now to restart run the following command:
.\thor2 -mode rnd -reboot
Note if you are using CMD remove the ".\" from the command at the beginning
After the restart, expected to see the boot menu
Press on the camera button to select
Done.
--------------------------------------------------
Backup Solution
Spoiler: Click to show the steps
Usually I use this solution to backup my phone.
Tool needed:
MiniTool ShadowMaker (Paid) or trial option for 30 days
I prefer MiniTool ShadowMaker for these reasons
Compressed Image
Faster than other softwares
You can backup the whole storage not only one partition
Steps:
Switch to "Mass Storage mode"
Close "WPinternals"
Open "ShadowMaker "
Click "Connect " Under "This Computer"
Select "Backup"
Select "Source"
Select "Disk and Partitions
From the "combo box" Select your device "It should be at the end or the space is ~29GB"
Now select all the partitions one by one (just click on the last one and it will move to the next)
Click "OK"
Select "Destination" and set your backup folder
Click on "Backup Now"
Wait until the backup finish
Now you have a mirror of your phone storage.
Restore
If your phone system is not bricked Switch to "Mass Storage mode"
Close "WPinternals"
Open "ShadowMaker"
Goto "Restore"
Select your "backup copy"
Click "Restore"
Click "Next"
Check if all partitions selected then Click "Next"
Select your "phone storage" (~29GB)
Be careful not to select another drive by mistake
Click "Next"
Then "Start"
Note if your system is bricked.. you need to restore the system using WDRT first then do the Restore steps
After the restore finish
Disconnect your phone
Restart manually
Done, you have restored your old system as it was exactly.

there is not download link ?!

mhajlo said:
there is not download link ?!
Click to expand...
Click to collapse
In the YouTube video descriptions
Features & Custom FFU: Click Here (Youtube)

astifan said:
In the YouTube video descriptions
Features & Custom FFU: Click Here (Youtube)
Click to expand...
Click to collapse
Can I use dual boot with windows 10 for ARM with this FFU?
If yes then how?
Thank you in advance

X_Wolverine said:
Can I use dual boot with windows 10 for ARM with this FFU?
If yes then how?
Thank you in advance
Click to expand...
Click to collapse
Sorry I'm not sure about this part (because I didn't test it), you can contact the original author (Fadil) directly and ask him about this
but what I'm sure from it that it's prepared with boot menu and can support WOA on SD card but for some technical matters the SD card boot (tool) link dropped and the feature now in progress by WOA team.

Hello, can this image deploy to an Lumia 950 or is there a version for 950?
Thanks

Rikku2000-Dev said:
Hello, can this image deploy to an Lumia 950 or is there a version for 950?
Thanks
Click to expand...
Click to collapse
Hi, as per the video descriptions.. it's made and tested on Lumia 950XL only

Okey, i still download it... DSL6000 :____(
i let you know if it works, thank you.

Rikku2000-Dev said:
Okey, i still download it... DSL6000 :____(
i let you know if it works, thank you.
Click to expand...
Click to collapse
Most welcome , Just to confirm, I asked the original Author of the video Fadel Fadz and he said it's only for 950XL

Oh, does he have a version for 950?

this rom hase many tools..but how i can install old camera apps for example..?

some bugs found after testing...
1 gps not working sometimes..
2 hello not work sometimes.
3 battery drain so fast and heat up near the usb port
4 hanging sometimes
5 proximity sensor not working...sometimes too

how i can relock the bootloader in this ROM? i have triad but its fail

hooooossamq said:
how i can relock the bootloader in this ROM? i have triad but its fail
Click to expand...
Click to collapse
Hi, I'm really sorry for the delay I was a bit busy
I would advice you to go to this group https://t.me/Windows10Phone/
the original author (Fadil Fadz) is available in this group always.. you can ask him directly.

astifan said:
Hi, I'm really sorry for the delay I was a bit busy
I would advice you to go to this group https://t.me/Windows10Phone/
the original author (Fadil Fadz) is available in this group always.. you can ask him directly.
Click to expand...
Click to collapse
thank you my friend

Develop Bugs

welcome