Related
AT&T Galaxy SIII Bricked While Trying to Flash Back to Stock... Desperate For Help
Had my AT&T Galaxy S III rooted, stock ROM. Was having some issues after rooting so I decided to go back to bone stock, completely unroot so I flashed the I747UCALEM build from these forums on Odin 3.07. Needless to say the phone was held up mid flash, and I got a "FAIL" in Odin. When I tried to reboot the phone, I got a "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" When I reboot the phone this comes up and it's almost like a permanent download mode. I tried to reflash in Odin to unbrick the phone and it fails every single time.
Am I completely screwed? If I send it back to Samsung like this they'll see the that I rooted (didnt trip the flash counter) and void my warranty. Not sure what to do here. Thanks for any advice guys.
statusnone said:
Had my AT&T Galaxy S III rooted, stock ROM. Was having some issues after rooting so I decided to go back to bone stock, completely unroot so I flashed the I747UCALEM build from these forums on Odin 3.07. Needless to say the phone was held up mid flash, and I got a "FAIL" in Odin. When I tried to reboot the phone, I got a "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" When I reboot the phone this comes up and it's almost like a permanent download mode. I tried to reflash in Odin to unbrick the phone and it fails every single time.
Am I completely screwed? If I send it back to Samsung like this they'll see the that I rooted (didnt trip the flash counter) and void my warranty. Not sure what to do here. Thanks for any advice guys.
Click to expand...
Click to collapse
Sounds like you got a bad file re-download the AT&T software again from here http://forum.xda-developers.com/showthread.php?t=1737848 make sure you have Kies disabled i do think if its running in the background odin won't flash right don't hold me to it.and as long as you can get in download mode you should be able to fix it.also check here http://forum.xda-developers.com/showthread.php?t=1727443
statusnone said:
Had my AT&T Galaxy S III rooted, stock ROM. Was having some issues after rooting so I decided to go back to bone stock, completely unroot so I flashed the I747UCALEM build from these forums on Odin 3.07. Needless to say the phone was held up mid flash, and I got a "FAIL" in Odin. When I tried to reboot the phone, I got a "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" When I reboot the phone this comes up and it's almost like a permanent download mode. I tried to reflash in Odin to unbrick the phone and it fails every single time.
Am I completely screwed? If I send it back to Samsung like this they'll see the that I rooted (didnt trip the flash counter) and void my warranty. Not sure what to do here. Thanks for any advice guys.
Click to expand...
Click to collapse
Hmm this actually happened to me first time I tried to root (stupid computer fell asleep mid flash) however I was just able to reenter download mode and flash again, curious though , what did the screen say and where In the flash process did the Odin fail, for Me luckily it was 2/3 of the way through flashing system so I didn't have much to worry about. Though I imagine if it was writing something important like the sbl or somethimg and it failed you might be in trouble . All in all I would say try flashing again a few times maybe the file you downloaded is bad.
bec48 said:
Sounds like you got a bad file re-download the AT&T software again from here http://forum.xda-developers.com/showthread.php?t=1737848 make sure you have Kies disabled i do think if its running in the background odin won't flash right don't hold me to it.and as long as you can get in download mode you should be able to fix it.also check here http://forum.xda-developers.com/showthread.php?t=1727443
Click to expand...
Click to collapse
Downloading the UCALEM build from that link now on my laptop (my PC is notorious for connection issues with this phone, I should of known) and I'll pray for the best. Thank you very much for the help, I'll post back once I'm on my way.
I can't even download either firmwares. The direct downloads stop for some random reason at around 33 MB and there's 0 seeders for the torrent versions. Any other way to get these firmwares? Samsung updates isn't being nice tonight.
statusnone said:
I can't even download either firmwares. The direct downloads stop for some random reason at around 33 MB and there's 0 seeders for the torrent versions. Any other way to get these firmwares? Samsung updates isn't being nice tonight.
Click to expand...
Click to collapse
The update is in Kies as well.
Finally got the update to download, used a different browser. Flashed the new build through Odin and it worked, unbricked the phone. Apparently it is the connection through my regular PC. Thanks for everyones help!
Hi all. I'm in a real pickle here and hoping someone can tell me how to get out of this mess. It's a bit of a long story, but I'll summarise as best I can.
I've had my Galaxy Note 2 LTE (N7105) for a year and I rooted it pretty much the day after I got it. I'm not new to rooting at all (fourth Android device since 2010, all rooted), but I still feel like a noob at times. Over this 2014 Easter period I had time off so I decided to change ROMs.
I was previously using CM 11, which I had been using pretty much since I rooted. And I had updated CM at least once a month, sometimes more frequently. So I was looking for some new ROMs, downloaded about 5 and tried them out. The last two I tried was OmniROM (a 4.4.2 ROM) and CM 11 Remix (also a 4.4.2 ROM). I was using TWRP 2.7.0.2 to do the wipes, caches, flashes, etc. I had no issues flashing OmniROM, but when I flashed CM 11 Remix, I couldn't get in the first time. I was stuck in a boot loop. I pulled the battery, got back into recovery and tried flashing again. Still boot looping. I think the mistake I made was a Data Format. Either way, I finally got CM 11 Remix to load by first wiping, flashing the ROM, GApps, a sensor fix, a camera fix, Devil Kernel and then Super SU. However once in the ROM I was getting constant Google Play Store / Services FCs. Oh, and yes, I went through the typical brand new Android setups, entering my Google account and so on... I found that if I cleared data / caches on both Google Play Store app and Google Play Services app, it gave me temporary joy but as soon as I tried to download any app in Google Play I'd get the FC. Also, my signal was totally gone. I tried flashing back to OmniROM as it was my last known good and working ROM, but now that was boot looping. I even tried some of the other ROMs from that bunch I had, including AOKP. All would boot loop.
So after much trying different GApp packages, I decided to best thing to do would be restore it to stock, root again, then go for the custom ROM (hopefully CM 11 Remix) from a nice clean slate. So I did this. I downloaded the Android 4.3 stock ROM from SamMobile here. Installed Odin 3.07, then loaded it up and flashed the stock ROM. All seemed to go great, but when the ROM was done and phone rebooted, I get stuck in another boot loop! This time at the white "Samsung" logo with the glowing blue edges. Not the model number screen. Also my LED light is on blue, if that means anything.
So I found this thread (post at top of page) which suggests I need to flash the PIT file during the stock ROM installation with Odin. So I found the PIT file here, and I'm ready to flash this along with the stock ROM... HOWEVER, I read something somewhere (can't find it now) that implied if I'm on Android 4.3, flashing a PIT is a bad move. Can anyone comment on that? I guessing since the stock ROM is 4.3, I'm technically on 4.3 (even though I can't get into it).
Or if anything else I'm doing immediately stands out as a seriously stupid move, please let me know. I've been without normal use of my phone for a couple days now and ironically I'm at the point where I'm considering going without a phone for the rest of my life... LOL! AS IF I COULD!
Anyways, any help will be much appreciated!
EDIT: I just realised I should have posted in Troubleshooting, not General Questions... If mods want to move this, please do.
i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.
edan1979 said:
i just suggest that you flash the stock odin without the pit and see if its working out or not. sometimes playing with pit files can screw up your device even more...
btw... next time you play flashing... i'm suggesting you make a backup of your working custom. its will save you lots of time if this kind of problem happen.
Click to expand...
Click to collapse
I don't have any working ROM. All I have now is a boot loop.
invertedskull said:
I don't have any working ROM. All I have now is a boot loop.
Click to expand...
Click to collapse
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.
Banutu said:
I had a problem with my device where I was stuck at boot loader as well, but it was from the rar file of the rom(cm 11) cause I tried downloading it again and it worked.
I suggest you prepare Odin and the stock firmware, wipe factory/cache dalvik, system (advanced), then flash stock firmware, to bring everything back to normal.
Click to expand...
Click to collapse
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?
invertedskull said:
Hmmm, I'm not stuck at boot loader, just boot loop. Maybe you meant that?
To clarify, all I can do now is...
1. Boot normally and end up in a boot loop (at "Samsung" white logo with glowing blue edges).
2. Boot into Download mode and from there I can use Odin to flash / install.
3. Boot into stock recovery, which I've never used before (only ever used custom recovery).
I've prepped Odin again, ready to flash the stock firmware, but I've never done a wipe / factory reset with Odin. I don't see any Advanced settings? Did you mean I can do it elsewhere? Cos I see I can do wipes / factory reset from stock recovery.
So should I do that AND then go into Download mode and flash stock firmware with Odin?
Click to expand...
Click to collapse
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.
Banutu said:
ohhh my bad, I meant boot loop (stuck at samsung logo), mine was stuck there but then after it restarts and goes into recovery mode
do these following steps and you should be fine with your device.
1. Go into recovery mode
2. Wipe factory/reset
3. Wipe cache
4. Wipe dalvik
5. Advance > format/system
Now you have no rom or any OS to load,
1. Power off the device
2. Open Odin on your PC(right click run as administrator)
3. power on your note in Download Mode
4. Connect your device to your PC via USB
5. odin should recognize your device, something blue like " ID" or something there, you should be familiar with that.
6. click PDA, and find the official stock firmware zip you got it from samsung website, and make sure it fits your device(for example if you have your note from italy you should have ITV)
7. Hit Start and it should finish in 5-10 minutes.
Its the cleanest way with Odin, I did some crap on my device and that's how I return it to normal.
Click to expand...
Click to collapse
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!
invertedskull said:
All good! Cheers man!
I actually went ahead and booted into stock recovery and did the factory reset and partition wipe before I saw your post. And the stock firmware I'd flashed with Odin previously is now booting and I'm finally back in!!! WOOOOOOOOO!!!
Just need to root this bad boy and get back to a nice shiny custom ROM.
Thanks for the advice everyone!
Click to expand...
Click to collapse
I'm glad to hear that man, peace ^^
Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!
invertedskull said:
I have another hurdle... Some built in security is stopping SuperSU from running. It's not Knox, but something like it. I get this error message:
"Unauthorized access to a secured area has been blocked. Tap here for more info."
How can I disable this? I've searched on Google already but so far nothing is helping and I can mostly only find info about Knox...
EDIT: It was goddamn Knox all along... And I just disabled it by means of SuperSU. Finally!
Click to expand...
Click to collapse
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S
Banutu said:
Lolol, see your finding your way on your own ^_^, I was about to give you this link and suggest you to read the comments as well
http://www.w0lfdroid.com/2013/12/Fix-Root-Problem-on-Android-4.3-for-Galaxy-S3-S4-Note2-Note3.html
Unfortunately for me I don't have Note 2 =(, I have an S II Plus, I hope to get Note 2 next month can't wait =S
Click to expand...
Click to collapse
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.
invertedskull said:
Heh, yeah, all is well in my world once again!
The Note 2 is a great device man. I am sure you'll love it. The Note 3 looks great also, but I don't like the ribbed sides (I'm fussy) and last I read there's an eFuze that goes off once rooted or something along those lines. That's sh!t.
Click to expand...
Click to collapse
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk
Banutu said:
What do you think about the new oneplus one, do you think I should get that instead?
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
Hmmm, I haven't seen that one... Feel free to PM me a link.
Help Me!
Banutu said:
I'm glad to hear that man, peace ^^
Click to expand...
Click to collapse
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
If you have access to anything, and don't get JUST the boot loop, then you DO NOT have the same case I was in. You are probably able to recover from this. Try posting on the Tf Forums. The guys over there are "specialists" in Asus Tf tablets, and as you'll see on this thread (http://www.transformerforums.com/fo...-boot-loop-after-doing-routine-cm-update.html), they gave me a lot of help. Not that I was able to recover, but they were awesome dudes.
mroldman281 said:
My case is the same case of Invertedskull. I already did all steps as you instructed. I wiped data/cache/system and flash a stock room 4.4.2 of Nordic Rom on SamMobile website.
After flashed, the looping still happens. When I put the charger, the looping stops and goes to the main screen normally. Sometimes, it suddenly restarts but not frequently.
OMG! How to stop it. Pls help me.
My Note 2 is N7105 LTE - Optus (Australia)
Click to expand...
Click to collapse
mroldman281, You didn't post again, so I don't know, If You found solution, but since I had same simptoms, and after four days of reinstalling different stock roms, wiping and even messing with PIT via Odin etc..I can say, that in my case the reason for boot loop was faulty battery. The phone worked when it was plugged in and restarted soon after i unplugged USB cable, and just lopped afterwards. Replacement battery put everything back in order. And I am one happy Camper!
Hope this info helps someone else with boot loop problem
same problem stuck in bootloop
hey guys i have the same problem bootloop all the time i tryied stock firmware but nothing happend avec i rooted my note 2 and intalled a costom recovery and a many roms but stuck in bootloop i didn't chage baterry , by the way i wiped cache and reset factory and clear dalvick cache but the same always bootloop
what u suggest i do
ps : i can acces to bootloader or download mode it charge normally
woow get back my note 2 lte alone
hey guys i get back my note 2 i don't know how but it was a succes :victory:
first : i tried so many afficial firmware 4.4.2 and costom roms but didn't change the problem of bootloop
then i remembred what version i was in it was 4.1.1 so i download it from sammobiles thenks to them flash it and boooom the note 2 lte start like a charm
i want to thanks everyone for their help even if they didn't help directly but this past 3 days i read almost all the threads about note 2
well i thinks one of the selutions here is to revert back the the original stock firmware like i did so maybe will fix the bootloop
I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
baruchadi said:
I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
Click to expand...
Click to collapse
Downgrading your boot loader from 4.3 is a guaranteed brick. I'm not sure if the brick will get you to the Samsung screen.
If you're already assuming its bricked reboot into recovery and do a full wipe. Restore a nandroid of something if you have one or try flashing a custom ROM. Because Odin failed maybe it never flashed the boot loader.
Worth a try
Sent from my SGH-I747M using XDA Free mobile app
baruchadi said:
I was trying to carrier unlock my phone, and to do that i tried to downgrade it 4.3 to 4.1.1, and only after i had pressed the button, i had noticed that this might brick my phone in a comment in one of the forums, this is what i did:
http://forum.xda-developers.com/showthread.php?t=2625461
after following this and trying to run odin with it, odin returned "FAIL", and due to my high level of stupidity at the time, i tried to use the original 4.1.1 as my PDA in odin right after, i didnt reboot or anything, just pressed start again with the other tar.md5 file....
so now i cannot go past the samsung galaxy s3 logo when booting. I CAN go into download mode though, but i have no clue what i am supposed to do afterwards
i have the Galaxy S 3 i747 (was 4.3 before the whole mess) at&t carrier, i am trying to unlock it because i am travelling and need a phone.
please help me fix it, i do not care about the warranty since i dont have it anymore anyways, as long as the phone is working
also, if possible, i also need to unlock it afterwards, any help is HIGHLY appreciated, thanks!
Click to expand...
Click to collapse
Welcome to the forum! Wished you'd come in much earlier though as you would have found you CANNOT downgrade from 4.3 to 4.1.1 to free unlock. Sorry, but once you are on 4.3, the surest way to unlock is to obtain the unlock code from the carrier or purchase one online. Sounds like you do have a soft brick. If your phone is still booting to the Samsung logo, then it's only a soft brick. Attempting to downgrade the 4.3 bootloader usually results in a hard brick so you may be in luck.
To fix this first, try to see if you can boot to recovery mode and do a hard wipe/factory reset. If you are able to boot to recovery (or download) mode then you have little to worry about. If the reset does not work, you can flash custom recovery via Odin and follow the instructions in the thread below to restore stock 4.3. Afraid, you have to revert to full stock 4.3 to get the phone back in working order and don't even think about 4.1.1.
http://forum.xda-developers.com/showthread.php?t=2658486
If you are not able to get to recovery, then you can see if you can boot from a debrick image following the instructions (on the first page) of the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
Once your phone is working normally, you can request the unlock code from AT&T via the request form below. If eligible, they should provide this. Otherwise, you would have to buy one online ....
https://www.att.com/deviceunlock/client/en_US/
Let me know if you need any further help.
KorGuy123 said:
Downgrading your boot loader from 4.3 is a guaranteed brick. I'm not sure if the brick will get you to the Samsung screen.
If you're already assuming its bricked reboot into recovery and do a full wipe. Restore a nandroid of something if you have one or try flashing a custom ROM. Because Odin failed maybe it never flashed the boot loader.
Worth a try
Sent from my SGH-I747M using XDA Free mobile app
Click to expand...
Click to collapse
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
Larry2999 said:
Welcome to the forum! Wished you'd come in much earlier though as you would have found you CANNOT downgrade from 4.3 to 4.1.1 to free unlock. Sorry, but once you are on 4.3, the surest way to unlock is to obtain the unlock code from the carrier or purchase one online. Sounds like you do have a soft brick. If your phone is still booting to the Samsung logo, then it's only a soft brick. Attempting to downgrade the 4.3 bootloader usually results in a hard brick so you may be in luck.
To fix this first, try to see if you can boot to recovery mode and do a hard wipe/factory reset. If you are able to boot to recovery (or download) mode then you have little to worry about. If the reset does not work, you can flash custom recovery via Odin and follow the instructions in the thread below to restore stock 4.3. Afraid, you have to revert to full stock 4.3 to get the phone back in working order and don't even think about 4.1.1.
http://forum.xda-developers.com/showthread.php?t=2658486
If you are not able to get to recovery, then you can see if you can boot from a debrick image following the instructions (on the first page) of the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
Once your phone is working normally, you can request the unlock code from AT&T via the request form below. If eligible, they should provide this. Otherwise, you would have to buy one online ....
https://www.att.com/deviceunlock/client/en_US/
Let me know if you need any further help.
Click to expand...
Click to collapse
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
baruchadi said:
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
Click to expand...
Click to collapse
It's time to start reading. Before doing any flashing/modding, you should make sure you understand what you're doing and know the risks.
Now as for Odin, it's quite straight forward. Phone needs to be in download mode, you put the PDA file in Odin and flash (if it's a Odin one-click, just need to hit start). One thing is to not interrupt it! Especially if flashing bootloaders cause that will brick your phone. Also, don't downgrade bootloaders.
There are a few guides in the sticky, I suggest you take an hour or two reading them so things like that don't happen again (or that you know what to do if it does).
GL!
baruchadi said:
I tried wiping everything, i also wiped cache, still didn't boot, thanks though!
I am able to get to recovery, but the first link isn't very clear.... i am not really familiar with odin and all this other stuff... lol, i am now downloading the files it says to download in the first link though, can you maybe tell me in a quick list what exactly im supposed to do?
thanks!
Click to expand...
Click to collapse
Alright. If wipe/reset didn't work, you'll need to restore full stock 4.3 via custom recovery. Here's what we need to do....
1) Download the Odin flashable *.Tar file for custom recovery. I prefer TWRP because of the GUI so that's where I'm pointing you to ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
2) Download the stock restore file for 4.3 from the thread below... If you are using TWRP, then the first link is the one you need
http://forum.xda-developers.com/showthread.php?t=2658486
3) Copy the stock restore zip file to a good quality (micro) SD card
4) I presume you have Odin already so you will use this to flash custom recovery to your phone. Run Odin.exe on your PC. If you are using Odin v.3.09 then you need the AP tab. For all other versions, use the PDA tab. Navigate to the custom recovery *.Tar file you downloaded earlier and place this in the PDA (or AP tab). Leave the default settings as is and do not check/uncheck any boxes other than the default settings.
5) Boot the phone to download mode via the 3-button combo (Volume Down/Home/Power). When you get to Odin (Download) mode, press volume up to continue. Connect the phone to your PC with a good quality micro USB cable. Wait until Odin has recognized the device then click on the Start button to start firmware installation (flashing). Wait for the flashing to end and the <Pass> message. Disconnect the phone from the PC and pull the battery to stop auto reboot.
6) Place the micro SD card with the stock restore zip in your phone. Replace the battery and boot to recovery mode. If you were successful with the firmware flashing above, it should boot you to custom recovery.
7) Select install from external card and navigate to the stock restore zip file. Select this file and swipe the screen to start firmware installation. Wait for installation to complete. Then clear your cache/dalvik and reboot to system.
This will hopefully do it.
I have what's probably a unique situation, though I hope not. For background info, I bought two I747s, one white and one blue, each with issues, but I intended to put parts together to end up with one good one.
When I did a factory reset on the blue one via the recovery menu, it returned a bunch of errors along the lines of "failed to mount /data." Then when it rebooted it would hang on the Samsung logo. Back in recovery mode it returns more of the same errors just booting into recovery mode, and factory reset still returns more of the same errors and doesn't fix anything. I flashed 4.3 with Odin in an attempt to fix it, but I got the boards mixed up, and that one had 4.4 on it, not 4.1 like I thought. I'm pretty sure it's hard bricked now (that whole can't downgrade thing) because it's unresponsive to everything. Though my computer does recognize that it's plugged in, more on that later.
So I figured, fine, I screwed up, I'll just use the other board with 4.1 on it from the white phone. Except when I did a factory reset on that one, it did the exact same thing! Same errors, same problem stuck at the Samsung logo. Except this time I'm not flashing sh*t until I know exactly what I need to do to fix it. In another post where the guy had the same issue with 4.1.1, it was solved by flashing 4.3 with Odin. And another post where the guy had no idea what version he had, he just knew it was lower than 4.3, his problem was also solved by flashing 4.3, But since my last efforts failed miserably, I'm very reluctant to try it until I get some knowledgeable input. I don't remember exactly which version is on there, it's 4.1.something. I'd also prefer not to upgrade beyond 4.1 because I'd like to unlock it and from what I'm reading you can only do it for free if you're on 4.1. So I guess I need a link to an Odin flashable 4.1 package?
As for the poor blue phone that used to have 4.4.something, and was mistakenly flashed with 4.3, I've heard about JTAG but I don't quite understand it, and I'm not sure it would work in my case since a lot of what I'm reading says that bricking which occurs from downgrading is often unfixable. However, Windows recognizes that a device is plugged in when I attach it via USB. It shows up in the Device Manager as QHSUSB_DLOAD. I am currently researching more on this and the method of booting from an SD card, except I don't have an SD card reader at the moment.
Any assistance, advice, links, information, and plain ole encouragement are always welcome and appreciated.
For the phone running 4.1, flash any stock rom in Odin. After flashing, boot into recovery and perform a factory reset, then boot the phone and use the free method to sim unlock. The important thing is to have the stock 4.1.1 dialler in order to access the hidden menu options?
For home hard bricked phone, you will have to try the debrick image method. If it doesn't work, a jtag service should be able to force flash a rom to the phone.
Wow, that was like a crazy fast reply!
What if the phone is 4.1.2? Can I still flash 4.1.1? I'm on the hunt for a 4.1.1 stock rom now.
Yes, you can flash 4.1.1 from 4.1.2.
audit13 said:
Yes, you can flash 4.1.1 from 4.1.2.
Click to expand...
Click to collapse
Apparently not always. I downloaded and flashed 4.1.1 with Oden 3.07, it rebooted, showed the android image like it was updating, progress bar finished, and then it just went blank. Now both phones are in the same condition of being hard bricked and showing QHSUSB_DLOAD in the device manager.
This is strange. I have downgraded approximately 10 i747m phones from 4.1.2 to 4.1.1, unlocked using the free method, and re-flashed back to 4.1.2 after unlocking.
http://forum.xda-developers.com/showthread.php?t=2371897
What options did you check in Odin? Where did you get the 4.1.1 ROM? I ask because the stock ATT 4.1.1 rom was apparently removed from sammobile.com.
How did you confirm that the phone was running 4.1.2?
I checked only auto reboot in Odin.
I found this link sammobile.com/firmwares/database/SGH-I747/ in this thread http://forum.xda-developers.com/galaxy-s3-att/help/downgrade-att-running-stock-4-4-2-rom-t3170938 , 7th post
The download was going absurdly slow, so I googled the exact file name being downloaded which was, I747UCDLK3_I747ATTDLK3_ATT, and found a google drive link at https://drive.google.com/file/d/0B_UTWXKFnZoNVFdSVjJEZlMwZjA/edit which was the first result after searching for the file name if that link doesn't work. I'm downloading the slow one now to compare it to the one I got from google drive.
I'm unsure if the phone was 4.1.1 or 4.1.2, that's why I asked if it's possible to flash 4.1.1 on top of 4.1.2. I was only trying to do a factory reset originally and had no intentions of flashing anything. I just wanted to wipe out all the crap on it from the previous user so I had only glanced at the version out of curiosity to see if it was unlockable via the free method. I remember it was 4.1.something.
I have an SD card reader on order. Hopefully I'll be able to unbrick one of them.
Do you, or anyone else, have any idea why a simple factory reset would cause errors like I described and then hang on reboot? At that point both phones were 100% factory and I hadn't done anything to them except put a battery in them to power them on. I've done a factory reset on four other S3s and this didn't happen.
It is definitely possible to flash 4.1.1 over 4.1.2 because the bootloader could not be downgraded until the mjb version.
That's what I've been reading. So where did I go wrong? Any idea why a factory reset would screw up like that?
Did you confirm the bootloader before flashing?
audit13 said:
Did you confirm the bootloader before flashing?
Click to expand...
Click to collapse
No, because I had no intentions of flashing it when I tried to do a factory reset. Then after that went bad it wouldn't boot, and I don't know how to check the boatloader when a phone will only go into recovery mode.
Where did you see reference to 4.1? It's possible that the modem or baseband was 4.1 but the bootloader was 4.3.
Under about device and then Android version. The one where if you tap it a lot you get the jellybean android that pops up. It wasn't the baseband version because that's a much longer number with the model number in it.
That screen doesn't tell you the bootloader.
As I said, I didn't check for the bootloader version before I ran into trouble because I only wanted to do a factory reset and I didn't intend to flash anything. I wouldn't imagine that it would have a different bootloader than the OS version unless that can happen without any user intervention because the previous owner was only concerned with selfies and games. She certainly didn't modify anything.
I cant explain what happened. This has never happened to me after flashing about 10 phones.
I believe it has something to do with the errors that were produced while trying to do a factory reset. What bothers me is that both phones did the exact same thing. Normally I'd say it was something I did, except that I didn't do anything but put a battery in them, boot up, find lots of junk installed, and then attempt a factory reset. On the first phone, I rebooted into recovery and tried it from there. On the second phone I tried it from inside the OS. Same results on both. The phones ran fine before that.
Any advice on how to do the boot from an SD card, or how to do the JTAG thing? I've been reading a lot but the information jumps around a lot. I'm comfortable with soldering and have an IT background if that helps.
It's possible that the recovery was corrupt or the partitions were corrupt.
Whenever I factory reset a phone, I always boot into recovery to do that, not from within the ROM.
Sounds to me like you did nothing wrong.
Did the previous owner have the phone from the time it was new?
Edit: for the phone that you flashed with 4.1.1, Odin said "pass" in the status window and the it auto rebooted?
audit13 said:
Did the previous owner have the phone from the time it was new?
Edit: for the phone that you flashed with 4.1.1, Odin said "pass" in the status window and the it auto rebooted?
Click to expand...
Click to collapse
I don't know for sure if she had it from new. Yes, for both phones Odin said pass in the window and then it rebooted. I had walked away when Odin finished with the first phone. I came back and it was dead. The second one I watched and it showed the android with the wireframe in his guts and the progress bar which moved across, and then it just went blank.
There were error messages about the partitions when I did the factory reset IIRC. Perhaps the recovery or the partition was corrupted like you said. It's just odd that both had the exact same identical problem with the exact same results. That's why I think that it must have been something I did, except that I didn't DO anything other than initiate a factory reset.
I took an i747m and reflashed stock the Telus 4.4.2 ROM.
In download mode, you should see the green Android guy with the words "Downloading...Do not turn off target" and a blue progress bar moving from left to right.
I did not check reset in Odin. Once it finished flashing the ROM, I removed the USB cable, removed the battery, replaced the battery, and booted the phone. I the Android guy with the wire frame for a few seconds, the screen went blank, and the phone started up with the Samsung logo.
Since you were getting errors with mounting the different partitions, you may have needed to flash the PIT and PDA files but I can't really say for sure as I have never encountered this problem.
I normally verify everything before I use Odin because phones that I have been given to fix have had all sorts of weird configurations.
You'll have to try the debrick guide. of use a jtag service. You could also do what I did and that is to look for people with phones that have a damaged screen and buy they at a steep discount.
Before I get going - yes I know I messed up. I do have plenty of experience flashing ROMs etc, albeit I'm absolutely not an expert. This was purely a not thinking moment.
So I flashed my Samsung Tab S4 with Kali Nethunter a while back, not really used the tab since. Without a great deal of thought, I decided to put the device back to factory. I went back into the OS and flicked the OEM toggle - utter braindead move. Obviously the device now comes up with a warning, the exact wording is:
"Security Error: This device has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. Please note that repair / return for this issue may have additional cost"
I can still access download mode.
Right, now you've finished laughing/cussing me I did some digging and apparently I can still flash with Odin if its the official ROM? I went to SAMMobile and downloaded the latest ROM and Odin fails with a write error.
What I need to know is:
How bad have I messed up?
Is this recoverable?
Any help appreciated.
Hello there,
So yes, pretty bad mistake but these things happen but it should be recoverable. Just follow the link to get your device booted up! Hopefully the link is for your variant, if not look into installing twrp recovery for your device. Once installed you can back up your data and flash the rom compatible using twrp. Then set up the device and restore your data but make sure it's unlocked or your error may repeat itself! Also you have to find the right version of Odin, they do vary some are patched. Have fun!!
Recovery
Hi,
Thanks for the reply Jedi.
It already has TWRP on it, but recovery is inaccessible since I turned the OEM lock back on. The only thing I can now access is download mode but it can't seem to write to it, which I'm guessing is because the OEM lock is back on. I thought I might still be able to write the official Samsung ROMs even with the OEM lock but it doesnt seem like its the case. Obviously no access to ADB to do a Fastboot unlock either. Fresh out of ideas.
Any other solutions?
bump - anyone? lol, really not looking for an expensive door stop.
It seems you're at the dead end. However, there might be a solution for this, not sure though does it work. But go to OnePlus forum and you'll find how to recover from bricked device. You still got hope because of TWRP. good luck bro
OK, so for anyone wondering if this is fixable, the answer is YES!
You can flash the standard ROM even with the bootloader locked. Clearly what I downloaded from SAMMobile wasnt compatible, however when I used Frija, it found and downloaded the correct ROMs.
Another sticking point of this was the infamous USB 2.0 issue, I assumed the ROM was failing again, however when I finally could be arsed to try it on my old PC, its worked like a charm.
So there you have it:
Latest version of Odin
Latest Samsung USB drivers
Latest ROM downloaded from Frija
Put the tablet into download mode and flash away.