Develop Bugs

[Q] Error 140 when flashing RUU file

I am trying to install RUU_Marvel_HTC_Europe_1.30.401.0_Radio_47.10.35.30 29H_7.46.35.08_release_183799_signed.exe and am getting error140 something about wrong bootloader version.
Can anyone help?
My Current version is ARA_1.47.415.1 + HBOOT 0.90.0.0

Try checking this thread:
http://forum.xda-developers.com/showthread.php?t=835777
and let's know if it helps !!!!

I am a little confused. Do need to have s-off to be able to do this? i mean to install the Europe RUU.
Note that my phone is not locked (not branded) but has s-on

just run it but don't continue or anything then find rom.zip somewhere in windows temp files then rename to PG76IMG.zip then copy to root of memory card then flash by holding Vol down + power when completely off fast boot uncheck.
Also you have to make a goldcard for this to work if you are s-on

Thanks. Ill try that

Pls help.Have WildFire S, Relocked bootloader, modified Hboot by this guide.When i'm trying to update my ROM using RUU, i have 140 Error.When i'm trying to update ROM using PG76IMG.zip bootloader ignores Update.
Smartphone info:
HTC Wildfire S (Greece)
Android: 2.3.5
Sense 2.1
Software number: 2.14.124.1
What can i do to flash new ROM? OTA update is very buggy.
PS: Sorry, bad english =(

scandron said:
Pls help.Have WildFire S, Relocked bootloader, modified Hboot by this guide.When i'm trying to update my ROM using RUU, i have 140 Error.When i'm trying to update ROM using PG76IMG.zip bootloader ignores Update.
Smartphone info:
HTC Wildfire S (Greece)
Android: 2.3.5
Sense 2.1
Software number: 2.14.124.1
What can i do to flash new ROM? OTA update is very buggy.
PS: Sorry, bad english =(
Click to expand...
Click to collapse
Which ROM are you trying to update to? The method that works for sure is described here: http://forum.xda-developers.com/showthread.php?t=1467844
Just follow the instruction. Good luck

Tried to update 2.13.401.2 ROM.I haven't installed custom ROM, even recovery was stock.But i'll try.
I know about CID and GoldCard

[Q] HTC One X Hboot bricked, help please!

Please help me, I have misread that Maximus 8.0 is for all CID, hence I have did all the step to flash hboot as well, so I did "fastboot flash zip firmware.zip" and the cmd hang in the middle of sending the firmware.zip.
Then I reboot the phone and now the hboot is with Hboot security warning and my hboot remaind at 0.96 version.
Please help me how to return everything back to unlock states with functional recovery, because I cant even get to recovery right now. Please hlpe me with guides because really do not want to mess it up again.
Thank you all in advance! my CID is 044

hellcommando said:
Please help me, I have misread that Maximus 8.0 is for all CID, hence I have did all the step to flash hboot as well, so I did "fastboot flash zip firmware.zip" and the cmd hang in the middle of sending the firmware.zip.
Then I reboot the phone and now the hboot is with Hboot security warning and my hboot remaind at 0.96 version.
Please help me how to return everything back to unlock states with functional recovery, because I cant even get to recovery right now. Please hlpe me with guides because really do not want to mess it up again.
I am wondering will running RUU solve the problem because I believe my battery should have about 50% and above...
Thank you all in advance! my CID is 044
Click to expand...
Click to collapse
I am thinking will running RUU will solve this problem since my Hboot is in early version?

Dude you're not bricked, re-unlock your bootloader with 'fastboot flash unlocktoken unlock_code.bin'
then restore clockworkmod backup/flash ROM

OMG, it works! Seriously thank you a lot!!

Use the latest clockworkmod recovery from this thread http://forum.xda-developers.com/showthread.php?t=1594819
this way you will be able to mount the usb storage in cwm and to copy a different custom firmware.
Then you can flash a different custom firmware, i guess it should work.

Yes, I unlock my bootloader again and reflash the recovery. Lucky is I have all the files I need in phone storage, so after nandroid restore and now phone function as usual.
Seriously thank you guys for helping out
Sent from my HTC One X using Tapatalk 2

Returning to Stock from JB Maximus

Hi, I'm heading back to stock JB Sense from the original JB Maximus rom (which worked very well). I relocked in fastboot and went to flash original RUU (3.14.401.31) and I got the error message to use the correct RUU. My cid is HTC__001, it's from Clove UK. Do I need to change the HBOOT? It's from the first Maximus JB rom. It's just booting to the bootloader now. Thanks for any help!

Do this:
fastboot getvar version-main
and post the result here...

vin4yak said:
Do this:
fastboot getvar version-main
and post the result here...
Click to expand...
Click to collapse
3.09.401.100
Thanks very much!

Firs you need to update your firmware to 3.14.401.31 with Hboot 1.39..
Download (firmware): http://www.androidrevolution.nl/downloader/download.php?file=3.14.401.31.zip
And then run this RUU:
http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/

Hi, thanks very much, that was the RUU I used but I'll try with that firmware and report back. Cheers for the prompt help!!

Hi, I've downloaded the firmware a few times but when I try to flash it I'm getting "cannot determine image filename for 'firmware.zip'
I moved the firmware download to my fastboot folder and renamed it firmware.zip. Then I did "fastboot flash firmware.zip" < EDIT YEP THAT was the problem
Thanks again!

Honestly at this point I'd just even go back to Maximus 4.1 at this point, but those threads all disappeared.
EDIT: I got the firmware updated, now going for the RUU

Got the RUU installed, thanks very much vin4yak. Now the screen is flashing (flickering) on the sides once it booted, do you have any idea what I can do about that? I'm happy to install a different Sense rom if that helps.

Hey there,
similar problem: I have 3.09.401.100 as well, flashed the firmware successfully, relocked, tried to run the appropirate RUU but got a signature error (132) while it tries to send the it to the phone. I have the appropriate CID HTC___102 for the RUU etc. My HBOOT is 1.23.0000 - could that be a problem with the RUU? Any insights?
Thanks in advance
Froschfinger

Froschfinger said:
Hey there,
similar problem: I have 3.09.401.100 as well, flashed the firmware successfully, relocked, tried to run the appropirate RUU but got a signature error (132) while it tries to send the it to the phone. I have the appropriate CID HTC___102 for the RUU etc. My HBOOT is 1.23.0000 - could that be a problem with the RUU? Any insights?
Click to expand...
Click to collapse
That's what I got the first time I tried to run the RUU, before flashing the new firmware. You may need firmware with a higher HBOOT to use this JB RUU. Once I flashed the firmware above, the RUU in this thread worked fine. I'm having some flashing now but heck, I had that when my phone was stock when I first got it, heh. I remember that issue now!

otarinz said:
Got the RUU installed, thanks very much vin4yak. Now the screen is flashing (flickering) on the sides once it booted, do you have any idea what I can do about that? I'm happy to install a different Sense rom if that helps.
Click to expand...
Click to collapse
Glad you sorted it out mate!
if you had just gone to stock to update... Then I will recommend you to use a custom sense rom if your attached to sense that much!
Use ViperX... It needs Hboot 1.31 at least..
Steps for flashing are the same as any other rom...
1. Wipe Data..Wipe Cache...Wipe Dalvic Cache... Or use Super Wipe Script(Recommended) : https://www.dropbox.com/s/0y31poo1kiaif4y/Super wipe script.zip
2. Flash rom. Flash Patch. (Check ViperX Thread)
3. Reboot.
Froschfinger said:
Hey there,
similar problem: I have 3.09.401.100 as well, flashed the firmware successfully, relocked, tried to run the appropirate RUU but got a signature error (132) while it tries to send the it to the phone. I have the appropriate CID HTC___102 for the RUU etc. My HBOOT is 1.23.0000 - could that be a problem with the RUU? Any insights?
Thanks in advance
Froschfinger
Click to expand...
Click to collapse
You first have to update your firmware... Download this : http://goo.gl/M0hLq
and then run the ruu...

Hey there,
it sounds as if the HBOOT is in fact my problem. Quick question: How exactly did you flash the firmware, especially the HBOOT? I flashed the boot.img and recovery.img via command since I have no SD card access, but this doesn't seem to have changed the HBOOT.
Thanks again
Froschfinger

Relock the bootloader:
"fastboot oem lock"
Reboot RUU:
"fastboot oem rebootRUU"
Flash the firmware:
fastboot flash zip firmware.zip
You might get an error the first time you do it... try again until you get a successful message.
After successful flashing...
Go to fastboot again,,,
Now if you want to install a custom rom, you need to flash custom recovery by unlocking the bootloader... or if you want to go full stock then run the RUU...

Hey vin4yak,
that was the missing piece in the puzzle. Flashing the whole .zip file. Finally I got it working - thank you so much!!!!
All the best
Froscher

[Q] Can't flash the device to stock rom using RUU

Hi,
I'm trying to restore from custom rom to stock rom.
My phone is CID ORANG216 and I'm using xx.xx.65.xx RUU releases.
I have 2 relevant files:
The RUU exe - RUU_ENDEAVOR_U_ICS_40_S_Orange_CH-Generic_2.17.65.2_Radio_2.1204.135.20_release_275590_signed.exe
OTA UPDATE for the device - OTA_ENDEAVOR_U_JB_45_S_Orange_CH-Generic_3.16.65.2-2.17.65.2_release_296426gf2xgpisn8xs0fti
After flashing the stock recovery, boot_signed.img, rebootRUU, the RUU update fails because of version failure, I suspect that the HBOOT version is the trouble maker.
My phone is unlocked with S-ON with HBOOT 1.36 and the HBOOT in the RUU is 1.12 .
Due to S-ON I cant change the hboot.
I can't seem to find a workaround for it and install the RUU.
Any ideas??
I even thought about compiling the latest JB release from htcdev development center and flash it...

hanochg said:
Hi,
I'm trying to restore from custom rom to stock rom.
My phone is CID ORANG216 and I'm using xx.xx.65.xx RUU releases.
I have 2 relevant files:
The RUU exe - RUU_ENDEAVOR_U_ICS_40_S_Orange_CH-Generic_2.17.65.2_Radio_2.1204.135.20_release_275590_signed.exe
OTA UPDATE for the device - OTA_ENDEAVOR_U_JB_45_S_Orange_CH-Generic_3.16.65.2-2.17.65.2_release_296426gf2xgpisn8xs0fti
After flashing the stock recovery, boot_signed.img, rebootRUU, the RUU update fails because of version failure, I suspect that the HBOOT version is the trouble maker.
My phone is unlocked with S-ON with HBOOT 1.36 and the HBOOT in the RUU is 1.12 .
Due to S-ON I cant change the hboot.
I can't seem to find a workaround for it and install the RUU.
Any ideas??
I even thought about compiling the latest JB release from htcdev development center and flash it...
Click to expand...
Click to collapse
You need to relock the bootloader to use install RUU . It has nothing to do with hboot . Just take note that you have to use the RUU that is on the same build or higher .

chaun1308 said:
You need to relock the bootloader to use install RUU . It has nothing to do with hboot . Just take note that you have to use the RUU that is on the same build or higher .
Click to expand...
Click to collapse
doesn't work... I'm getting "Error [140]: BOOTLOADER VERSION ERROR"
The only RUU exe available is the one i mentioned and its old
I don't know how to use the OTA file without the original stock rom already installed...
if it helps anything the command "fastboot getvar version-main" on my device gives:
version-main: 3.16.65.2

hanochg said:
doesn't work... I'm getting "Error [140]: BOOTLOADER VERSION ERROR"
The only RUU exe available is the one i mentioned and its old
I don't know how to use the OTA file without the original stock rom already installed...
if it helps anything the command "fastboot getvar version-main" on my device gives:
version-main: 3.16.65.2
Click to expand...
Click to collapse
Like I mentioned . You have to look for the version that's the same with yours or higher to use the RUU . I guess you can't go back to stock until you find the RUU of your version or higher . Maybe you could try a stock ROM nand backup ?

Here are stock backups
http://forum.xda-developers.com/showthread.php?t=1975140

Thanks for the help
my version or CID is not there, any other resource for nands?

Just lock your bootloader using fastboot oem lock and run this RUU with admin privileges..
http://bugsylawson.com/files/file/4...2-radio-51204163r30-release-296363-signedexe/
What error do you get when you do this?

twelve cdrtutt
vin4yak said:
Just lock your bootloader using fastboot oem lock and run this RUU with admin privileges..
ht tp://bugsylawson.com/files/file/412-ruu-endeavor-u-jb-45-s-orange-ch-generic-316652-radio-51204163r30-release-296363-signedexe/
What error do you get when you do this?
Click to expand...
Click to collapse
OMG that's the file I've been looking for 2 days!!!!
worked like a charm, you're my hero for the day! :victory:

hanochg said:
OMG that's the file I've been looking for 2 days!!!!
worked like a charm, you're my hero for the day! :victory:
Click to expand...
Click to collapse
Great!!

can someone put a valid link for that ruu.the site is offline now and i can't finde a valid link to download.

only1 said:
can someone put a valid link for that ruu.the site is offline now and i can't finde a valid link to download.
Click to expand...
Click to collapse
uploaded it again:
h ttp://we.tl/Spg5YhElwV

hanochg said:
uploaded it again:
h ttp://we.tl/Spg5YhElwV
Click to expand...
Click to collapse
worked perfect.thx man you're the best!!!

so, people told me that i can get stock kernel within any custom roms, but where can i get the modules? and can any one tell me some kernels which feature the battery saver? im not asking which is the best since its against the rules, just give me some and ill try them myelf, thanks alot

SilverTattoo said:
so, people told me that i can get stock kernel within any custom roms, but where can i get the modules? and can any one tell me some kernels which feature the battery saver? im not asking which is the best since its against the rules, just give me some and ill try them myelf, thanks alot
Click to expand...
Click to collapse
I don't think your questions relate to the subject here.
Anyway, custom roms are based on the stock rom and most of the times include a file called firmware.zip, look it up in the costum_rom.zip file.
hboot updates are tricky on this device and for upgrading it (from ICS to JB supported hboot) you need a special firmware built for your specific htc one x model (look at the manuals for more instructions).
For the battery saving, I think it depends on the rom you install and not the kernel (or maybe both because they come together?), check out for old posts about that issue, I'm sure its not the first time someone asks about it.
hope it helps

Rooting without Revolutionary

Hi,
I want to increase my internal memory by using Link2SD, for which I need my phone rooted. I have spent 2 days already trying to figure this out, but I have made zero progress. I have tried everything I could google, but most guides refer to revolutionary.io website, which is down.
I found this guide - http://forum.xda-developers.com/showthread.php?t=1600904
Even though it's for Incredible, I though the steps would be similar, perhaps with different files. Anyway, I'm stuck on step one where I need to unlock bootloader using HTCdev.
fastboot oem get_identifier_token returns command error:
(bootloader) [ERR] Command error !!!
OKAY [ 0.010s]
finished. total time: 0.010s
Click to expand...
Click to collapse
I am sure I have all my drivers installed correctly, both adb and fastboot work just fine (both show device when connected).
From what I understand, it is because of my HBOOT version, right? I tried running different RUUs I could find, but it always ends up with an error - either model id error [130], or something saying my image is newer than the one I want to upload (maybe it's bootloader version error [140], I don't remember now).
How should I proceed now?
Thanks
Phone specs:
Unbranded
HBOOT 1.02.001
S-ON
Android version 2.3.3
Baseband 32.56.00.32U_5.17.05.23
Software number 3.14.405.1

I have the exact same problem, except my device is branded, but I guess it doesn't matter much.
My software and HBOOT versions match yours

same problem ))

the same problem
HBOOT 1.02.001
S-ON
Android version 2.3.3
Baseband 32.56.00.32U_5.17.05.23
Software number 3.14.405.1

Google rumrunner s-off. Dunno if it will work r not but its for htc devices

jmcclue said:
Google rumrunner s-off. Dunno if it will work r not but its for htc devices
Click to expand...
Click to collapse
It won't, because HTCDEV unlock is necessary for it. And we can't perform it because of the reasons explained in the first post.

try this http://forum.xda-developers.com/htc...-froyo-2-2-to-stock-2-1-t3187731/post62534573

installing pre-rooted update zip on S-ON - this method doesn't work, system goes to reboot on atempt to update

yep! but I got a root other way
I have already written tutorial but in russian. make sure to download attachments you need register https://translate.google.ru/transla...8&view=findpost&p=42658143&edit-text=&act=url
if in short , I received a temporary root with Zerg Rush , and then changed version of rom with this tut http://forum.xda-developers.com/showthread.php?t=1550397 and then flash the official RUU 2.29.405.5 then installed the update 2.29.405.14 , and then install another update from htcdev is updated hboot to 1.03 version , then you can get the official unlock well then flash custom recovery and from his custom rom. sorry for my bad English, almost everything Google translator

Desire Bravo said:
yep! but I got a root other way
I have already written tutorial but in russian. make sure to download attachments you need register https://translate.google.ru/transla...8&view=findpost&p=42658143&edit-text=&act=url
if in short , I received a temporary root with Zerg Rush , and then changed version of rom with this tut http://forum.xda-developers.com/showthread.php?t=1550397 and then flash the official RUU 2.29.405.5 then installed the update 2.29.405.14 , and then install another update from htcdev is updated hboot to 1.03 version , then you can get the official unlock well then flash custom recovery and from his custom rom. sorry for my bad English, almost everything Google translator
Click to expand...
Click to collapse
i can read russian, haha http://4pda.ru/forum/index.php?showtopic=247349

& !THE SOLUTION! - it really works, thanks! - see http://forum.xda-developers.com/showpost.php?p=62647076&postcount=1260

Hello guys! Will this method work with 2.2.2 and HBoot 0.93.0001? I was trying to find the downgrade utility to 2.1 so i could use unrevoked, but unfortunately all links are dead.

Hi! You can Root with unrevoked.com
then S-off with alpharev.nl
and then flash any firmware.
Or you can flash any RUU firmware, but you need downgrade your firmware version with this Tutorial http://forum.xda-developers.com/showthread.php?p=24039156#post24039156
make sure: do not download and flash 2.3 firmware in step 2, download and flash for example RUU_Bravo_HTC_WWE_1.21.405.2

Desire Bravo can you help me?
@Desire Bravo,
You can also root your Desire (After you get your bootloader unlocked, of course) with Super One Click, this will work if you press the "Root" button while the HTC logo is displayed.
Are you the author of this russian tutorial?
I need help with the "downgrade.zip" and the second "PB99IMG.zip" files, seems to be missing. On the other hand, I don't know when I should flash the first "PB99IMG.zip" file or how to overwrite the "misc" partition. Can you help me with this?
Thank you very much in advance. Best regards.

Hi! Yes i can help, what is your hboot version? write info from the bootloader (vol down + power)
Are you from usa? Downgrade your Firmware version nummer, then try flash RUU Telstra from http://shipped-roms.com/download.ph...8.00.32U_5.11.05.14_release_150162_signed.exe
and unlock with htc dev

@Desire Bravo
Hello again Desire Bravo.
HBOOT 1.02.0001 Bootloader Locked. S-ON
Firmware version 2.3.3 Gingerbread signed 3.14.405.1
No, I'm from Spain (GSM Phone, not CDMA).
So I will use RUU WWE 2.29.405.5 firmware, but I don't know in which one of those steps I should flash the first PB99IMG.zip file (the modified "rom.zip"), neither how to overwrite the misc partition
Thank you very much in advance. Best regards.

Soooo Have you downgrade firmware version? if yes, you have version 1.15.405.3 and now you can flash "any" RUU an firmware. Try flash .exe (boot too bootloader and run Ruu 2.29.405.5 . exe ) http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_159811_signed.exe
OR extract rom.zip rename to PB99IMG and flash with pB methode.
OR follow this guide and write 2.29.405.14 manuell http://forum.xda-developers.com/showthread.php?t=1550397
then run PB9920000_Bravo_Froyo_hboot_1.03.0003_R.exe

Desire Bravo said:
Soooo Have you downgrade firmware version? if yes, you have version 1.15.405.3 and now you can flash "any" RUU an firmware. Try flash .exe (boot too bootloader and run Ruu 2.29.405.5 . exe ) http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_159811_signed.exe
OR extract rom.zip rename to PB99IMG and flash with pB methode.
OR follow this guide and write 2.29.405.14 manuell http://forum.xda-developers.com/showthread.php?t=1550397
then run PB9920000_Bravo_Froyo_hboot_1.03.0003_R.exe
Click to expand...
Click to collapse
u cant just run "any" ruu otherwise why would there be so many? why not only one for each android version?
if his phone is branded, vodafone etc etc then a wwe ruu would not work, or atleast shouldnt, it would give id error. u should ask these questions first before telling people to run ruu's.

ok if you know more, tell but there isn't enough choice on the site htc dev.
At me too branded t-mobile desire, that to me didn't prevent to flash RUU_Bravo_Froyo_HTC_WWE_2.29.405.5 then to flash update OTA_2.29.405.14_ and then PB9920000_Bravo_Froyo_hboot_1.03.0003_R
I told as at me it turned out, at others it can not turn out, then it is necessary to try with other firmware therefore I also told "any"
I now will make experiment, it became interesting to me))
UPD: i have found simple way to update hboot 1.02 - to 1.03
I will write small tutorial soon

@Desire Bravo,
No, I didn't downgrade my firmware version yet, as I don't know when I have to flash the rom.zip file (renamed as PB99IMG.zip), that's what I'm asking to you.
On the other hand, I don't know how to overwrite the "misc" partition.
So, when I fully understand "how" and "when" to perform each one of those steps I will go ahead with the tutorial.
@jmcclue,
My original firmware was FR83G (Orange) Android Froyo, signed 2.29.405.14, I have found this firmware in a .tar.gz file but don't how to flash it as it's not a zip or a RUU file.
Can I decompress the .tar.gz and put its content in a .zip file? If it's not, please, can you tell me how to get a valid FR83G file?
Do you know how to overwrite the "misc" partition of the Desire?
Thank you very much in advance to both of you. Best regards.