Develop Bugs

Htc One X temperatures

Hey guys I have installed Battery Monitor and my phone is reporting too high temperatures when browsing internet - 42° C.
I played Qosmos on charger and temperature was 47°C. I am really disappointed with battery solution of HOX.
so, what are dangerous temperatures for our phone? I saw someone reported 55.. doest it damage battery?
Odesláno z mého HTC One X pomocí Tapatalk 2

No worry, mine went up to 63.8 °C. It is still working now...
More info @ HTC One X overheat up to 63.8 °C

JayceOoi said:
No worry, mine went up to 63.8 °C. It is still working now...
More info @ HTC One X overheat up to 63.8 °C
Click to expand...
Click to collapse
do u have screen flex?

hamdir said:
do u have screen flex?
Click to expand...
Click to collapse
Do you mean this?
HTC One X screen flex flaw

JayceOoi said:
Do you mean this?
HTC One X screen flex flaw
Click to expand...
Click to collapse
yep most likely caused by overheat

50 and the clocks go down, 70 and the phone shuts itself off. My temps are basicly always +50 if im playing something or the phone is charging. Playing and charging rises the temps anywhere between 50 and 70... Just recovered from overheating shutdown, so yeah, overheating is indeed present with the ONE X...

Even browsing it gets hot, seems that stock browser heats more than dolphin, but I have to test it further. Temp+CPU shows 40C.

CPUzer0 said:
50 and the clocks go down, 70 and the phone shuts itself off. My temps are basicly always +50 if im playing something or the phone is charging. Playing and charging rises the temps anywhere between 50 and 70... Just recovered from overheating shutdown, so yeah, overheating is indeed present with the ONE X...
Click to expand...
Click to collapse
did you notice any gap between screen and metal lining on left side? some people said overheat may cause gap on it..

myself11 said:
Even browsing it gets hot, seems that stock browser heats more than dolphin, but I have to test it further. Temp+CPU shows 40C.
Click to expand...
Click to collapse
yup definitely the stock browser run hotter than other browsers, for some reason

dawnfighter said:
did you notice any gap between screen and metal lining on left side? some people said overheat may cause gap on it..
Click to expand...
Click to collapse
Now that you should mention it, i can definitely fit my fingernail between the body and the screen glass without any forcing or anything, resulting the case bending and it feels quite as i could just snap the glass off anytime i wanted. The glass also makes creaking noises, especially the bottom part. Scary stuff. Both sides of the screen and bottom corners show some flexing (disortion on the screen when medium pressure is applied) as well.
Beginning to reconsider whether my HOX is pristine or not, or could even the design of the model be flawed.
Good thing there is such thing as warranty.

CPUzer0 said:
Now that you should mention it, i can definitely fit my fingernail between the body and the screen glass without any forcing or anything, resulting the case bending and it feels quite as i could just snap the glass off anytime i wanted. The glass also makes creaking noises, especially the bottom part. Scary stuff. Both sides of the screen and bottom corners show some flexing (disortion on the screen when medium pressure is applied) as well.
Beginning to reconsider whether my HOX is pristine or not, or could even the design of the model be flawed.
Good thing there is such thing as warranty.
Click to expand...
Click to collapse
yes it will be hard to put our hands on this
screen flex is associated with temps, its just not happening to all people depending on their usage and the state it come with out of box
if its hardware trait i can live with it but i prefer to have the flex on top of the screen rather than the sides lol
ill order HOX with screen flex on top lol

I was playing two flash videos yesterday on 3G and some surfing which was about 20 mins my battery before surfing was 40% by the time I realise how hot my phone was it dropped to 11%!!!!
I began to feel the phone get hot on both screen and back was so hot it almost burnt my finger. I understand T3 can get hot but not to the point of temperate of a hot kettle.

Setting the governor to Powersave only uses 2 CPU and save heat by alot even playing games. I use conservative, only uses 2 CPU mostly and its similar to on demand

CPUzer0 said:
Now that you should mention it, i can definitely fit my fingernail between the body and the screen glass without any forcing or anything, resulting the case bending and it feels quite as i could just snap the glass off anytime i wanted. The glass also makes creaking noises, especially the bottom part. Scary stuff. Both sides of the screen and bottom corners show some flexing (disortion on the screen when medium pressure is applied) as well.
Beginning to reconsider whether my HOX is pristine or not, or could even the design of the model be flawed.
Good thing there is such thing as warranty.
Click to expand...
Click to collapse
i guess this is most scary comment i ever heard.. i will never let my phone get over 55 anymore..

dawnfighter said:
i guess this is most scary comment i ever heard.. i will never let my phone get over 55 anymore..
Click to expand...
Click to collapse
i had this defect out of box on my first HOX never knew if it was caused by overheat but definitely it was imperfect out of box then screen was so loose you feel you want to pull it out
now ill test the new one which has no lamination imperfections so far
slowly though ill let the glue settle for a week first before starting the heavy stuff

hamdir said:
i had this defect out of box on my first HOX never knew if it was caused by overheat but definitely it was imperfect out of box then screen was so loose you feel you want to pull it out
now ill test the new one which has no lamination imperfections so far
slowly though ill let the glue settle for a week first before starting the heavy stuff
Click to expand...
Click to collapse
good luck hamdir.. i read some of your post/comment regarding build quality and all this issue.. personally i think it take a lot of hope and belief that you'll get exactly what you want.. mine has gap as well but not so serious.. i think i can live with that and as long as it not getting widen.. except for this and some screen flex, my HOX has no problem..

My HOX is running around 38C on ARHD 3.1

listentochaos said:
My HOX is running around 38C on ARHD 3.1
Click to expand...
Click to collapse
is it downclockable yet?
anyway i'm definitely rooting this time
not taking any risks

CPU temperatuur
Is it also possible to measure the cpu temperature? I can only find the battery temperature. The highest temperature I measured was around 45* degrees. Sometimes the phone gets very hot in the right top corner. I have noticed at the left side of the phone there's a little gap, not so big that I could put my finger nail into it, but big enough for dust. At the top the gap between and the body is big enough for me to put my fingernail between the body and the screen, as far as I know that gap was there when I get the phone.
Anyway, I'll stick to this phone, if no dust gets underneath the screen I'm happy the way it is! I love this phone very much!! can't live without it!

My phone seems to get hot. The highest has been over 50C but it gets to over 45C when just browsing the internet with stock browser and not plugged in. This is with the newest 1.29.402.11 firmware
Is this normal for this phone?

Bended phone

Does anyone has a problem with the phone not being perfectly straight?
Now, when i let it on a flat surface, the phone does not sit perfectly on its back. Upper left corner and bottom right corner are a bit (2-3mm) up from the flat surface...
I tried to straighten it (by applying some force to bend it in the other way) but it comes back to it's original bend..,

It seems like you might have gotten a faulty device. Mine is as flat as it should be. Is it really that big of a deal? These kind of manufacturing errors tend to happen, but not very often.

To be honest, that would drive me mad! The 2 phones we have are perfectly flat. For me, the whole point of buying the phone was for the design. I've got rif of my Galaxy S4 and I'm happy to accept the downgrade in performance because the P6 has a nice design/feel. I'd be taking the phone back to wherever you bought it as it's obviously defective....

Mine isnt too. Theres maybe 1mm space between table and phone when i push it from one side. But this is not a big problem, im dealing with it

Maybe your battery bulged? You had over heating problems?

warea said:
Maybe your battery bulged? You had over heating problems?
Click to expand...
Click to collapse
Does Lithium-Polymer even bulge?

warea said:
Maybe your battery bulged? You had over heating problems?
Click to expand...
Click to collapse
It does overheat, but i understood is a general problem given the design of this phone. But i don't see any bump or something different on the back, just that it gets a little bent from time to time.
BluntP6 said:
Mine isnt too. Theres maybe 1mm space between table and phone when i push it from one side. But this is not a big problem, im dealing with it
Click to expand...
Click to collapse
1mm should be ok for me too

etoo_cta said:
Does anyone has a problem with the phone not being perfectly straight?
Now, when i let it on a flat surface, the phone does not sit perfectly on its back. Upper left corner and bottom right corner are a bit (2-3mm) up from the flat surface...
I tried to straighten it (by applying some force to bend it in the other way) but it comes back to it's original bend..,
Click to expand...
Click to collapse
Mine is perfectly flat. Return to seller for a new phone.

tonyw111 said:
Mine is perfectly flat. Return to seller for a new phone.
Click to expand...
Click to collapse
Not quite possible, was bought from China, before it went on sale international.

[Q] weird stripe by the edge of the screen - please help:)

Hi!
So I have quite new nexus 7 2013 (bought it 2 weeks ago) and yesterday I recognized that it has weird stripe by the edge of the screen, just left side, its not all the way also and its also visible when tablet is booting. Picture is attached
And its only visible when you look on it with an angle. Im 90% sure that it wasnt there before... ( its really visible on black background , in dark room, Im sure I could see it..) . But is it kind of light bleeding? Of course its not a big problem for me but just wondering if it wasnt there before and just happend can be connected to some heating problem or so and be worse in the future. And tablet wasnt dropped on the floor of course.
Anyone has the same?
With cheaper tablets - I dont care ..but its fresh and not so cheap (especially here in Norway) and when Im laying on bed during the night and have my head a bit on the side ..then its pretty annoying
And of course I have guaranty but.. there was small accident and top right corner was slided through the wall which is like sand paper..nothing big,few small scratches on the plastic cover and it wasnt like dropping on the floor ..but it can looks like a bit, its visible. And my question is if it can cause problems during eventual reclamation process. Thanx in advance for any help

pgolowacz said:
Hi!
So I have quite new nexus 7 2013 (bought it 2 weeks ago) and yesterday I recognized that it has weird stripe by the edge of the screen, just left side, its not all the way also and its also visible when tablet is booting. Picture is attached
And its only visible when you look on it with an angle. Im 90% sure that it wasnt there before... ( its really visible on black background , in dark room, Im sure I could see it..) . But is it kind of light bleeding? Of course its not a big problem for me but just wondering if it wasnt there before and just happend can be connected to some heating problem or so and be worse in the future. And tablet wasnt dropped on the floor of course.
Anyone has the same?
With cheaper tablets - I dont care ..but its fresh and not so cheap (especially here in Norway) and when Im laying on bed during the night and have my head a bit on the side ..then its pretty annoying
And of course I have guaranty but.. there was small accident and top right corner was slided through the wall which is like sand paper..nothing big,few small scratches on the plastic cover and it wasnt like dropping on the floor ..but it can looks like a bit, its visible. And my question is if it can cause problems during eventual reclamation process. Thanx in advance for any help
Click to expand...
Click to collapse
I would RMA if possible. I don't forsee any issues with the return.

People have had experiences where they had to pay for repairs because of apparent "physical damage"
Sent from my Nexus 7 using XDA Premium 4 mobile app

is this normal?

Hi, please see the picture and tell me if it's happened to you, the back glass not fitting correctly after only 3 months of normal use, no drop, and what do you suggest a solution? thank you.

I was just noticing this on mine a few days ago. But I cant remember if it was always this way. I noticed it after my phone got super hot from charging, at 1st I though it was the battery swelling. Device cares app says my battery is healthy. So idk but the seams seem to be consistent all around just wider than I thought they were.

denism81 said:
I was just noticing this on mine a few days ago. But I cant remember if it was always this way. I noticed it after my phone got super hot from charging, at 1st I though it was the battery swelling. Device cares app says my battery is healthy. So idk but the seams seem to be consistent all around just wider than I thought they were.
Click to expand...
Click to collapse
i bought it brand-new before only 3 months and i am very careful about the battery, i am not charging it above 80% and no heating.

alsartawi said:
i bought it brand-new before only 3 months and i am very careful about the battery, i am not charging it above 80% and no heating.
Click to expand...
Click to collapse
I have a slight wobble when phone is placed screen down from right side top corner. Does yours do that?

denism81 said:
I have a slight wobble when phone is placed screen down from right side top corner. Does yours do that?
Click to expand...
Click to collapse
no it doesn't.

alsartawi said:
Hi, please see the picture and tell me if it's happened to you, the back glass not fitting correctly after only 3 months of normal use, no drop, and what do you suggest a solution? thank you.
Click to expand...
Click to collapse
Probably an adhesive failure/improper assembly. May or may not effect it's water/dust resistance.
Needs to be disassembled to be examined/ repaired.
Extreme heat weakens the adhesive bond of the strips used to secure the back panel. It's possible that careful heating and then pressing down could reseat it, but given the cost of the phone probably best to leave it to an experienced tech. Also the adhesive surface may have by now become contaminated with dust making simple attachment impossible without replacing the strip.

Question Question about unfolding completely flat

Hi!
I have the phone for about a month, it works perfectly and I love it. But in the first few weeks, whenever I unfolded the phone it snapped right to a 180 angle, but in the last few days it seems like there's sometimes a missing few degrees before it's completely flat.
If I unfold it a bit more with a little bit of force (but not much at all) it unfolds completely flat again. Is that normal? Should I show it to Samsung?

Dust.
You should give it a bath

[Deleted]

Nat.smith26 said:
Dust.
You should give it a bath
Click to expand...
Click to collapse
Been doing that to mine since day one. I work in construction so a bath is required to keep it clean.

AgentItay said:
Hi!
I have the phone for about a month, it works perfectly and I love it. But in the first few weeks, whenever I unfolded the phone it snapped right to a 180 angle, but in the last few days it seems like there's sometimes a missing few degrees before it's completely flat.
If I unfold it a bit more with a little bit of force (but not much at all) it unfolds completely flat again. Is that normal? Should I show it to Samsung?
Click to expand...
Click to collapse
It could possibly be the bristles inside the hinge that keeps dust from getting inside the device. If those bristles come loose (it's a strip that's apparently glued on across the entire length of the phone inside the hinge) they could possibly hinder the phone from opening all the way flat. That's a wild guess but I read somewhere about the bristles coming loose and creating problems. Anyway, you probably should make Samsung or your carrier (if you bought the device through a carrier) aware of it. The hinge is under warranty so if it fails, Samsung should fix or replace it for free or your carrier can issue you a warranty replacement.

u0xpsec said:
Been doing that to mine since day one. I work in construction so a bath is required to keep it clean.
Click to expand...
Click to collapse
At first I thought this was a joke, but it actually makes a lot of sense. Just to confirm - You really do this? Legit? haha. I also work in a veryyy dusty environment.. Might have to start doing the same!

Tim-2.0 said:
At first I thought this was a joke, but it actually makes a lot of sense. Just to confirm - You really do this? Legit? haha. I also work in a veryyy dusty environment.. Might have to start doing the same!
Click to expand...
Click to collapse
I wasn't joking either.
I really wash my phone on a daily basis, with soap.

Nat.smith26 said:
I wasn't joking either.
I really wash my phone on a daily basis, with soap.
Click to expand...
Click to collapse
Isn't it amazing how far technology has come

Mine has always needed an extra push to open fully from new.

Tim-2.0 said:
Isn't it amazing how far technology has come
Click to expand...
Click to collapse
Now I can take a bath with my phone ! and watch a movie !

Mine is the same not flat

New hinge contruction (without gears like F2 or F3) and old problems...

AgentItay said:
Hi!
I have the phone for about a month, it works perfectly and I love it. But in the first few weeks, whenever I unfolded the phone it snapped right to a 180 angle, but in the last few days it seems like there's sometimes a missing few degrees before it's completely flat.
If I unfold it a bit more with a little bit of force (but not much at all) it unfolds completely flat again. Is that normal? Should I show it to Samsung?
Click to expand...
Click to collapse
Mine does exactly the same thing. Sometimes it snaps right open 180 and sometimes it does not. You should not worry about it!

sunking101 said:
Mine has always needed an extra push to open fully from new.
Click to expand...
Click to collapse
Me too, out of the box I needed to push a little to get it perfectly flat. It has improved slightly after a few weeks but I still need to do it. My Z Fold 3 snapped open flat by itself. It annoys me quite a bit.

Latoc said:
Me too, out of the box I needed to push a little to get it perfectly flat. It has improved slightly after a few weeks but I still need to do it. My Z Fold 3 snapped open flat by itself. It annoys me quite a bit.
Click to expand...
Click to collapse
I never had the previous Folds to compare but the geared hinge sounds better quality to me. However, I think that as long as our phones snap shut properly and need a bit of force to open then all is well.
Basically once I pull mine open for the rest of the way I'm doing all the work to get it to open fully. I don't feel any kind of 'spring action' assisting me.

This is normal. My Fold 4 has done this since new. It opens like normal to like 175 degrees then the remaining 5 is a bit loose/soft. If I push further to 180 and let go it will kinda push itself back to 175. Not a big deal to me. I feel like the fewer degrees the glass bends the less likely the crease will crack

I had this problem with my Fold 1 and Fold 2. A couple of months after purchase I noticed the phone wouldn't open all the way. Its dust! Push a sticky tape into the hinge and run it along the edge on both sides. It is a tedious process but it should help.

What clothes are you Wear with a lot of dust?
Ok but seriously I have fold 2 above 1,5 years, carry in pocket of trousers and I don't have aby problems with full fold

I had a Fold 2 and Fold 3(x2). Also I had a Fold 4 in burgundy. All of them was completely 180 flat. Now I have a Black 1 Tb fold 4 and have the same "Non flat" issue. For complete flat opening I must push the sides. But it is so since day 1 out of the box. I think it depends on how the screen protector is glued and stretched.