Develop Bugs

[SOLVED] Galaxy SIII recovery issue

Hello,
Let me start off by saying if this is the wrong place to post this please inform me of the right forum.
I just recently got a Samsung Galaxy SIII (on August 29) and everything was working really well, until today. Yes it is rooted. I plugged the phone into my computer and Kies said there was a firmware update for my phone. I began doing the upgrade and my beloved windows computer got the blue screen of death during the actual update process.
After restarting my computer, I began to do the update recovery to continue with my upgrade. Same blue screen. I spoke to a rogers tech rep and he requested I re-install my Kies software, which I did. Upon having no success from that I began to do more research, however most of them are saying to reflash the stock firmware (which I have) using ODIN. I have no success here as well. Every time i do get into download/recovery mode, ODIN recognizes my phone, but fails when i click start.
In my recovery mode the information i see is as follows:
ODIN MODE
PRODUCT NAME: SGH-1747M
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE
Is there anything at all I can do to fix this? Or am I one of those most unfortunate people who just got screwed lol.
ANY assistance is VERY MUCH appreciated!
Thanks in advance

If you have clockwork recovery, try formatting the system first then flash the ROM. Just dont reboot without flashing the ROM first.
Have you tried the emergency firmware load through KIES?
Sent from my SGH-I747M using xda app-developers app

cue_32 said:
If you have clockwork recovery, try formatting the system first then flash the ROM. Just dont reboot without flashing the ROM first.
Have you tried the emergency firmware load through KIES?
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
thank you for the quick reply! sorry for my late one, just got home from a family emergency...
no I don't have CWM.. I'm very familiar with it though I didn't put it on my SIII (i was planning to do so tonight)
I've tried the emergency firmware, however it asked for a code which I don't have :S
I'm new to Samsung's version of Android, previously I owned an Xperia X10

Try running Odin on a different computer

If you're using a desktop use the usb ports on the back Odin don't like the usb hub on front, or try different computers, I have one computer that Odin will never work on but I go right to my other one and works fine, try restarting pc or uninstall Odin and download a different version, also try downloading a few different roms try these below, I've been in that position then finally after trying and trying a Rom will finally take
http://forum.xda-developers.com/showthread.php?t=1739426
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

rob1216 said:
If you're using a desktop use the usb ports on the back Odin don't like the usb hub on front, or try different computers, I have one computer that Odin will never work on but I go right to my other one and works fine, try restarting pc or uninstall Odin and download a different version, also try downloading a few different roms try these below, I've been in that position then finally after trying and trying a Rom will finally take
http://forum.xda-developers.com/showthread.php?t=1739426
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
that worked!!!!!!!!! thank you, i just changed the USB port lol.. its always something so simple you wouldn't think to do it initially!
thanks so much!

ISSUES UPDATING TO Jelly bean

I have an ATT Galaxy S3 its been two days I've been trying to update from 2 different computers. I don't know what else to do. Someone please help me
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

GrapePopRocks said:
I have an ATT Galaxy S3 its been two days I've been trying to update from 2 different computers. I don't know what else to do. Someone please help me
Click to expand...
Click to collapse
Couple of questions before anyone can answer...
1 . How are you trying to update .. through KIES or ODIN ?
2 . How are you connecting it to your computer via USB .. Front or Rear ports ?

Using Kies and side ports on laptop
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Are you using the micro usb cable that came with the phone?
A lousy cable or as mentioned above a crummy usb port could be a source of problems. Also is the laptop plugged in and the s3 fully charged?
Kies uses Odin to flash the firmware update via the USB cable to the phone, so technically you are using Odin. You wouldn't really notice Odin was being used during the flash unless you look carefully at the small dialog in the upper left corner of the s3 screen during the update.

hi, what im trying to do is use odin to install root66 jb rom but before i do that i am running aokp 4.1.2 . do i first need to wipe phone before i use odin to flash rom or is it ok to just go head and install with odin? what i mean by wipeing phone is to wipe data /factory reset wipe cash wipe dav format system and what ever else there is in cwm to do. im just not sure havent done this before so some help would great.. thanks

ralphie1267 said:
hi, what im trying to do is use odin to install root66 jb rom but before i do that i am running aokp 4.1.2 . do i first need to wipe phone before i use odin to flash rom or is it ok to just go head and install with odin? what i mean by wipeing phone is to wipe data /factory reset wipe cash wipe dav format system and what ever else there is in cwm to do. im just not sure havent done this before so some help would great.. thanks
Click to expand...
Click to collapse
You'll need to do that wipe sooner or later (otherwise the stock ROM will fail to boot); you can either do it now or wait until after you've done the flash and use the stock recovery to do the wipe. I'd consider doing the wipe first to be easier.

Actually what I'm having issues with is Kies itself. I used a separate computer so that I could download Kies new but it's also a problem. Is there an easier way?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

GrapePopRocks said:
Actually what I'm having issues with is Kies itself. I used a separate computer so that I could download Kies new but it's also a problem. Is there an easier way?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Are you using the kies version from the support page on Samsung.com for YOUR phone? If you're trying to use kies instead of a mini version for a US phone, that hasn't worked for any of the other Galaxy line phones (at least in my experience).
Sent from my SGH-I747 using xda app-developers app

I don't know if this qualifies as easier (it would for me), but if Kies isn't working for you for whatever reason, you might try just using Odin directly. You can get Odin itself over in this thread, and completely stock images over in this thread; if you want the latest AT&T build, that would be this one.
(If you're slightly more ambitious, you could also try the rooted-but-otherwise-stock images found here, as a gateway to future customisation, but that's entirely up to you...)

Yes it's Kies from the support page. I will try with Odin directly see how that goes. If not I will be back LOL
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

To put it kindly, Kies is a steaming pile of cr4p. To be honest, upgrading via Odin with the official ROM is the best way to go. I spent days trying to get my phone to connect to Kies and it was a mess. I went to the AT&T store and they told me that there wasn't anything that they can do, this is an open issue. It works for some people, not others.
Finally I downloaded Kies on my wife's Mac and it worked. So maybe try a Mac?

My sister has a Mac I will try that
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

USB only works to charge/triangle away doesn't work/ can't revert to stock.

I'm currently running task650's current ROM and ktoonz newest kernel . I'm unable to connect my phone to my PC via USB. I've tried 3 different USB cables including the original one that came with the phone. I'm trying to revert to stock to swap out phone, but I can't flash through Odin(cant restore stock recovery) and triangle away won't let me reset flash counter. I'm at a loss for ideas, I've been looking through the forums for days and I can't find anything . I've tried flashing different ROMs/kernels with no luck.
Sent from my SGH-I747 using xda premium

is USB debugging mode on? did you make a nandroid when you first rooted? that would contain the original firmware you were using before flashing anything. are you connecting to your PC after putting the phone in download mode or recovery mode? just covering all the bases, buddy.

Yes I've done all the above, however during a flash of cm10 i soft bricked somehow...and lost all data on my internal.. So I no longer have my original nandroid I'm not new to flashing at all and never imagined that would happen I've learned to expect the unexpected now.
Sent from my SGH-I747 using xda premium

Uninstall Kies
Uninstall \ Reinstall Samsung drivers, reboot
Use Odin 3.07
Use an OEM Cable
Flash rooted stock
Triangle Away
Flash Unrooted Stock

-Psychosomatic- said:
Uninstall Kies
Uninstall \ Reinstall Samsung drivers, reboot
Use Odin 3.07
Use an OEM Cable
Flash rooted stock
Triangle Away
Flash Unrooted Stock
Click to expand...
Click to collapse
Only problem with that is my phone will go into download and is detected by Odin, but fails flash every time.
Sent from my SGH-I747 using xda premium

mtnichols04 said:
Only problem with that is my phone will go into download and is detected by Odin, but fails flash every time.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
where are you getting the stock firmware tar from? have you tried a different source location?

xBeerdroiDx said:
where are you getting the stock firmware tar from? have you tried a different source location?
Click to expand...
Click to collapse
I've tried root66_Att_I747uckl3.tar.md5
Only ROM I've tried. I'll try another. I've tried the Samsung toolkit and it doesn't work properly cause I'm not getting proper connection. I have a theory that my USB doesn't work properly because my file directories are messed up on phone and are in a folder emulated/0/...
Sent from my SGH-I747 using xda premium

here's the thread for the stock firmware tars. if you're still able to get into download mode AND your device is recognized in odin, flash the appropriate carrier firmware.

xBeerdroiDx said:
here's the thread for the stock firmware tars. if you're still able to get into download mode AND your device is recognized in odin, flash the appropriate carrier firmware.
Click to expand...
Click to collapse
thats where I downloaded from before, Everytime I get into Odin it gets stuck on Getting PIT for mapping..........sits there, then fails. phone is in download mode, USB cord that came with phone. ive tried reinstalling USB drivers a million times.

have you looked into Mobile Odin? and i would consider downloading the firmware again in the event the one you have is bad.

xBeerdroiDx said:
have you looked into Mobile Odin? and i would consider downloading the firmware again in the event the one you have is bad.
Click to expand...
Click to collapse
Tried mobile Odin, it soft bricked my phone, had to plug in to a full charge before I could even get it back into recovery. The first 24 hours it wouldn't even go back into download or recovery... I thought I was going to have to get a new phone. Weirdest thing ever. Downloaded and tried a new stock firmware. I feel like I'm running out of options.. Lol and every time I triangle away I reboot and my triangle is back..lol
Sent from my SGH-I747 using xda premium

Was really hoping you'd find a solution to this. Sometime ago my phone's USB stopped working as well. It can still charge but the computer does not recognize it. My Googlefu has led me to believe this has happened to a hand full of people with Samsung phones.
Was hoping to flash stock Rom on my phone but I can't connect via Odin.

USB Cord matters...
AverageCanadian said:
Was really hoping you'd find a solution to this. Sometime ago my phone's USB stopped working as well. It can still charge but the computer does not recognize it. My Googlefu has led me to believe this has happened to a hand full of people with Samsung phones.
Was hoping to flash stock Rom on my phone but I can't connect via Odin.
Click to expand...
Click to collapse
Are you using the stock USB cord. it is 11 pin and most others are 5. Makes a difference.

thegodsquirrel said:
Are you using the stock USB cord. it is 11 pin and most others are 5. Makes a difference.
Click to expand...
Click to collapse
Yes, Ive tried every USB plug under the sun. My phone sometimes gets detected by my computer, and I can browse files but if I try to copy something from it, it freezes half way through, then becomes undetechable. Ive tried to flash through odin but it never works....just get stuck then fails.

help please!!!! :"(((

I flashed a rom (yes it was for the proper device) and I followed everything step by step. My phone went into a bootloop where it vibrates and the samsung logo pops up then it turns off and starts over again. I turned off the phone and tried to go into recovery mode but it just shows the TWRP screen and then go into the bootloop again. I also tried going into download mode to odin back to stock but my device isn't even recognized even after installing kies. what can i do???

What model device do you have?
What rom did you flash?
What rom did you start with?
Did you recently flash anything else?
What steps did you follow when you flashed?
Sent from my SGH-T999L using xda premium

DocHoliday77 said:
What model device do you have?
What rom did you flash?
What rom did you start with?
Did you recently flash anything else?
What steps did you follow when you flashed?
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
I have the T-mobile SGH-T999. I was flashing the latest version of universe s4 for the sgh-t999 and i was coming from stockorama_v2, i had not recently flashed anything either. I went into recovery (TWRP), did a factory reset and then flashed universe s4 and got stuck in a bootloop. I've flashed a bunch of times before but never had this happen =/ now my device isn't even recognized even after installing the drivers....

marcoxx626 said:
I flashed a rom (yes it was for the proper device) and I followed everything step by step. My phone went into a bootloop where it vibrates and the samsung logo pops up then it turns off and starts over again. I turned off the phone and tried to go into recovery mode but it just shows the TWRP screen and then go into the bootloop again. I also tried going into download mode to odin back to stock but my device isn't even recognized even after installing kies. what can i do???
Click to expand...
Click to collapse
remove your battery and try to get into recovery, wipe everything, try to reflash, then wipe again. might help not sure. but if you can get into download mode for your device to be recognizable i think you have to uninstall the kies drivers

KingKostas said:
remove your battery and try to get into recovery, wipe everything, try to reflash, then wipe again. might help not sure. but if you can get into download mode for your device to be recognizable i think you have to uninstall the kies drivers
Click to expand...
Click to collapse
I can't even get into recovery mode, when I try it just goes into a bootloop. I'm trying to use odin but when i flash clockwork mod it said failed :/

Try to flash back to stock
Sent from my SGH-T999 using xda premium

Instead of trying to flash cwm, try flashing the root66 firmware.
Sent from my SGH-T999L using xda premium
---------- Post added at 08:03 AM ---------- Previous post was at 08:01 AM ----------
Also, uninstall kies and the drivers. Then try one of the driver versions in my sig.
If you have kies installed that may be causing odin problems.
Sent from my SGH-T999L using xda premium

Ok guys so after removing and reinstalling the drivers on my laptop for about 4 hours straight I finally got the device to be "recognized" and I was able to flash back to stock with Odin.
Sent from my SGH-T999 using xda app-developers app

marcoxx626 said:
Ok guys so after removing and reinstalling the drivers on my laptop for about 4 hours straight I finally got the device to be "recognized" and I was able to flash back to stock with Odin.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Reinstall the drivers for this device, a simple google can give you following information:
This is a Windows device driver error. As device drivers can be used anytime your computer is trying to use a hardware resource, it can be difficult to tell which process is causing the error. If you notice the error when trying to do a specific task, identifying the source of the problem may be easier. For detail, see error.info/windows/driver-18.html
LunShao

What's needed for backup

Hi. I have a new GS4 arriving in a few days and wanted to find out what needs to be done in order to use titanium backup and to do a nandroid.
I have read conflicting stories that it needs to be fully rooted, that it only needs the bootloader unlocked, and that the bootloader comes already unlocked on the T-Mobile version. Can someone please clarify for me? I don't need to flash a custom ROM or kernel or anything like that. The phone is for my son, so all I want is to be able to do full backups for him. Thanks.
Sent from my Nexus 7 using xda premium

You need to be rooted.
-Titanium BU will backup your app plus app data
-For a nandroid backup you'll need to have a custom recovery (ie CWM, TWRP)
I used this for root (it will install SU binary and app, plus stock recovery)
http://forum.xda-developers.com/showthread.php?t=2294005
To install custom recovery you can use Odin to flash the tar version or use ROM manager, GOO ect depending on the recovery you want.

Everything baseballfanz posted.
The M919 Bootloader comes Unlocked outta the box.
For years, I've used Titanium Backup with the Pro key. Excellentsand theGGold Standard. Does everything except pour your coffee
I also use My Backup Pro as a redundancy. I primarily use it to backup & restore my Call Logs, MMS, SMS, etc . It also backs up & restores Apps and Data. I set it to back on a schedule.
For a Custom Recovery, I use TWRP 2.5.0.2.
https://hotfile.com/dl/230303459/7ce1553/openrecovery-twrp-2.5.0.2-jfltexx.tar.html
If you decide to flash TWRP, don't flash with Goo Manager as it will install TWRP 2.6.0.0 of which known issues have been reported. TWRP 2.5.0.2 has very little issues if any. I've been using it for months without any issues. Working flawlessly. TWRP also gets installed with ODIN. If you need the steps, let me know and I'll post them.
For Rooting, I also use CF-AUTO-ROOT by Chainfire installed with ODIN. Easy as pie, or however that saying goes.
Any questions, post away

Thanks to both of you. I'm already familiar with Titanium as I use the pro version on my tmo MT4G, rooted with cwm and running cyanogen. At least for now. I'll be getting myself the GS4 as well soon. So I know the virtues of using TB.
However, my son wants to stick with stock and get ota updates and I want him to be able to remove bloatware, backup everything, and be able to tweak a few things like the whole YouTube link issue(if it's still an issue) so we're looking for a reasonable compromise.
I also currently use cwm ROM manager app, droidwall, and spare parts+ which I would like to put on his phone if they will work.
Biker1... When you say bootloader comes unlocked, that's for the tmo one we will be getting?
Sent from my Nexus 7 using xda premium

Yes the T-mobile version M919 come with an unlocked bootloader.

OK thx good to know. So what will be my first step when unboxing it in order to be able to use the aforementioned apps? I also have root explorer, mybackup root, s2e, and superuser on the MT4G if they will be useful on the GS4.
Sent from my Nexus 7 using xda premium

Sorraia3 said:
OK thx good to know. So what will be my first step when unboxing it in order to be able to use the aforementioned apps? I also have root explorer, mybackup root, s2e, and superuser on the MT4G if they will be useful on the GS4.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Charge the battery fully!
Make sure you have a good known working usb cable. You should as it will be a new one.
You wanna have enough juice to do your installations and if things run a little long, you don't wanna get stuck in the middle
You have those Rooted apps so you can root the S4 using:
CF-AUTO-ROOT by Chainfire using ODIN. I'll post a link soon.
http://forum.xda-developers.com/showthread.php?t=2294005
In addition, install a Custom Recovery. There are a few good ones.
Personally, I use TWRP 2.5.0.2
Don't use Goo Manager as that will install version 2.6.0.0 which has known issues. Been using 2.5.0.2 for months without issue, but you can use a custom recovery of your choice of course.
So:
Charge battery
Have a good usb cable
ODIN CF-AUTO-ROOT
Boot
ODIN Custom Recovery
Boot
Check you S4 to make sure you're good to go.
Make a Nandroid
Install your Apps
When ready, download and Flash a ROM and Enjoy

OK it seems he really wants a chance to play with it out of the box. So, once its charged, it's his for now. I'm wondering though, if the bootloader is unlocked already does that mean if we choose to root it at a later date it won't need to be wiped or will it still lose anything not on the sd card?
I already went through this with one son who got a new phone and ended up losing everything on the old one because he wouldn't let me root it from the start and back things up. But that phone would've required a full wipe when I unlocked the bootloader.
If this guy starts setting things up and installing apps and data and such, and then wants me to root it for TB, will he lose everything?
Sent from my Nexus 7 using xda premium

Sorraia3 said:
OK it seems he really wants a chance to play with it out of the box. So, once its charged, it's his for now. I'm wondering though, if the bootloader is unlocked already does that mean if we choose to root it at a later date it won't need to be wiped or will it still lose anything not on the sd card?
I already went through this with one son who got a new phone and ended up losing everything on the old one because he wouldn't let me root it from the start and back things up. But that phone would've required a full wipe when I unlocked the bootloader.
If this guy starts setting things up and installing apps and data and such, and then wants me to root it for TB, will he lose everything?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
No. You can Root ltr on and not lose anything.
Rooting via CF-AUTO-ROOT via ODIN will not cause you to have to Wipe anything.
He can always back up his files every once in a while to his pc, which you would do whether you're gonna Root or not, for that 'Just in case' moment. You know, Murphy's Law
I don't do that as often as I should.
If there's a time when you have to Wipe device memory, you'd just transfer the files to the pc and/or SD card.
If everything's good to go, and you're ready to Root, But things go wrong (Murphy's Law again) and you have to wipe Internal but you didn't save the files, you'll be outta luck, but that can happen anytime. So just back up once in a while. Better safe than sorry........
What will most likely happen:
- your son will dl files, games, etc.
- later on, days, weeks, months, he'll want to Root
- you'll ODIN CF-AUTO -ROOT by Chainfire and you'll be good to go.
- after installing Recovery and TiBu, you'll back up the data on the device,and that's it.

OK... That's exactly what I wanted to know. Thanks so much!
Alrighty so, Odin is the program I will use to access the adb commands on the pc, correct? And I get that from where?
And the cf root file? Is there a handy link? Steps to follow, a guide perhaps?
After that's done I assume I have to flash the recovery? I prefer cwm. Or is that part of the cf/odin process?
Sent from my Nexus 7 using XDA Premium 4 mobile app

Sorraia3 said:
OK... That's exactly what I wanted to know. Thanks so much!
Alrighty so, Odin is the program I will use to access the adb commands on the pc, correct? And I get that from where?
And the cf root file? Is there a handy link? Steps to follow, a guide perhaps?
After that's done I assume I have to flash the recovery? I prefer cwm. Or is that part of the cf/odin process?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The CF-AUTO-ROOT link is posted previously. You install with ODIN.
I'll get you a link to ODIN so you can see what it's about.
You dl ODIN on your pc. You need drivers installed on your pc to recognize your S4.
You put tar files in the appropriate ODIN boxes
Tar files can be extracted from zip files.
You have to follow ODIN instructions exactly.
I'm briefly going through the basics as you really need to read the associated threads so you get an idea how the process works, then you'll probably have some questions which we can answer.
I'm not sure if CWM Recovery is installed via ODIN.
TWRP is. I use Version 2.5.0.2. But you can use CWM. There's a thread to show you howttoiinstall.
Root with CF-AUTO-ROOT via ODIN 3.07
Install Recovery (method depends on choice of Recovery)
Make a Nandroid backup
Then you can install, flash, etc. etc.....

Ok so he decided it was easy and quick enough to let me do it now. I'm following the thread instructions. I have the cf root and odin files. I run odin, check pda and pick the cf root file. I turn off phone, go into download mode and get the green android that says downloading do not turn off target. Now what?
Sent from my Nexus 7 using XDA Premium 4 mobile app

Sorraia3 said:
Ok so he decided it was easy and quick enough to let me do it now. I'm following the thread instructions. I have the cf root and odin files. I run odin, check pda and pick the cf root file. I turn off phone, go into download mode and get the green android that says downloading do not turn off target. Now what?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Connect to pc usb port to:
- a known working port
- with a known working usb cable. Stock cable should be fine.
HOLD ON
WAIT!

Sorraia3 said:
Ok so he decided it was easy and quick enough to let me do it now. I'm following the thread instructions. I have the cf root and odin files. I run odin, check pda and pick the cf root file. I turn off phone, go into download mode and get the green android that says downloading do not turn off target. Now what?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
-Plug phone into USB cord attached to pc
-It might need to install drivers just wait till that's done
-Click on START button on Odin
Everything you need to know is posted in the CF, auto root post.
Post=2 http://forum.xda-developers.com/showthread.php?p=41797153

Nothing happens. Its just me and the little green android sitting here staring at each other.
Sent from my Nexus 7 using XDA Premium 4 mobile app

You're doing it backwards.
Open up ODIN
After you have s4 in dl mode
Plug into usb on pc
Wait for phone to be recognized via COM Port
THEN put tar files in PDA slot and check appropriate boxes
AsiI explained previously, learning the process is extremely important, and without being there, so to speak, things can go wrong, Fast....

It found the phone, said had the samsung drivers then nothing. It's not showing up under ID:COM and I still have my little green friend again.
Sent from my Nexus 7 using XDA Premium 4 mobile app

Sorraia3 said:
It found the phone, said had the samsung drivers then nothing. It's not showing up under ID:COM and I still have my little green friend again.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is the COM Port showing
COM 1 or another number and showing in Blue or Green

No
Its not the usb port, I don't think anyway. Mouse works in both.
Of course I am on a crappy vista laptop... Think I'd have better luck using the xp desktop?
Sent from my Nexus 7 using XDA Premium 4 mobile app

pm sent