Develop Bugs

Highest output car charger

Is this the highest?
http://www.seidioonline.com/product-p/pmc.htm
Post links if you know of higher ones, thank you.
Sent from my ADR6400L using XDA App

There are 2.1A usb adapters, but I don't think microUSB can take advantage of it. The one you linked is a 1A, which is the same as the wall charger HTC gave with the phone. I'm currently using a 1A usb adapter in my truck.

Ok that's probably what I'm looking for then. Are there wall chargers greater than what came with the phone that I can take advantage of?

Your best bet would be to try the USB adapters made for iPads. The Apple products can utilize the 2.1A chargers with their sync cables, but I'm not sure if a microUSB cable can though. I have some 2.1A wallchargers from some of my Apple products, I'll test them later and let you know what I find out.

http://www.verizonwireless.com/b2c/...ryDetails&archetypeId=12299&accessoryId=46370

I just got an Enercell from Radio Shack with dual usbs. Max output is 2.5A divided between the two ports.
http://www.radioshack.com/product/index.jsp?productId=11329448
on sale now for only $14.99. Seems to be of good quality.

The Motorola rapid chargers rock.

Guys, unless you mod the usb adapter 5V spec, you aren't doing squat with a "high power" adapter. The device has an input impedence that will draw a certain amount of current at 5v., and that's it.
Standard battery: 1400 mAh
Time to charge: 4 hrs (according to manual)
That's 1400/4 = 350 mA.
Most adapters on the market spec more than that, they're usually 500 mA or above. And again, unless you boost the volts, you're not going to be able to push more than 350 mA or so.
So don't waste you're money.
On the other hand, if your going to share a car outlet with another device like mp3 or ipod, then yeah, you'll need a higher output, two port, adapter.
Edit: It just occurred to me that if you're using the phone heavily while charging, then yeah you may need more than 500 mA. My currrent widget shows the phone can draw another 250 mA or so during use. That plus the charge totals to around 600 mA. But depending upon design, the phone may not be able to pull in all 600 mA. A test with a current meter would be real interesting.

The charger shipped with the Thunderbolt is a 1 Amp charger.
If I use a 500 mA charger the Current Widget shows a +450mA charge current. However if I use the 1A charger, I get a charge current of about +850mA.
Given that the google navigation gobbles over 400mA when running, you need a car charger with greater than 500mA capacity of you want the phone to charge at the same time.
Sent from my ADR6400L using XDA App

boingboingbilly said:
The Motorola rapid chargers rock.
Click to expand...
Click to collapse
Good to hear, I ordered one today for $11 on ebay. I had heard other people say they liked that one too.

Ecomaniac said:
Guys, unless you mod the usb adapter 5V spec, you aren't doing squat with a "high power" adapter. The device has an input impedence that will draw a certain amount of current at 5v., and that's it.
Standard battery: 1400 mAh
Time to charge: 4 hrs (according to manual)
That's 1400/4 = 350 mA.
Click to expand...
Click to collapse
You're making the incorrect assumptions that the charging rate is constant, and charging is 100% efficient. Li-ion batteries can be charged at up to a 1C rate (i.e. 1.4A for a 1400 mA cell). Add the power drawn by the phone itself, and a 1.8 Amp charger might not be unreasonable (1.8 A is the specified limit for micro USB connectors). Whether the phone will actually do a maximum rate charge, I don't know.
This, from a TI Application Note (Google for SLAA287, board won't let me post links):
A Li-Ion battery charging process consists of three stages:
· Slow Charge: Pre-charging stage using current of 0.1C
· Fast Charge: Constant current charging stage using current of 1C
· Constant voltage charging stage
During the slow charge stage, the battery is charged with a constant low charge current of 0.1C, if the battery voltage is below 2.5V. The slow charge stage is rarely used during the charging process of a Li-Ion battery.
The fast charge (constant current) and constant voltage charging are the most important stages during a recharge process. Most Li-Ion batteries have a fully charged voltage of 4.1 or 4.2V.
The battery is first charged with a constant current of 1C until a battery voltage reaches 4.1 or 4.2V. The firmware continuously checks the charging current by sensing the voltage at the current sense resistor (Rsense) and
adjusts the duty cycle of PWM output from the MCU. The battery's voltage is checked frequently.
Whenever found the battery's voltage reaches 4.1 or 4.2V, the charger will switch to constant voltage charging mode. The battery is then charged with a constant voltage source at a fixed battery voltage of 4.1 or 4.2 V...When the charging current falls below 0.1C, the charging process must stop.
Click to expand...
Click to collapse

Monoprice has Cig to USB(1A) chargers and the USB to Micro cables in multiple lengths(I ordered 6' ones) for far cheaper than you will find anywhere else

mike.s said:
You're making the incorrect assumptions that the charging rate is constant, and charging is 100% efficient. Li-ion batteries can be charged at up to a 1C rate (i.e. 1.4A for a 1400 mA cell). Add the power drawn by the phone itself, and a 1.8 Amp charger might not be unreasonable (1.8 A is the specified limit for micro USB connectors). Whether the phone will actually do a maximum rate charge, I don't know.
This, from a TI Application Note (Google for SLAA287, board won't let me post links):
Click to expand...
Click to collapse
very useful, thanks!

walbuls said:
Monoprice has Cig to USB(1A) chargers and the USB to Micro cables in multiple lengths(I ordered 6' ones) for far cheaper than you will find anywhere else
Click to expand...
Click to collapse
I second monoprice.

I tried bunch of cig to usb car charger and none matched advertised output... They all showed Charging (USB). I now use AC inverter and it charges just like a wall charger.

eccenpix said:
I tried bunch of cig to usb car charger and none matched advertised output... They all showed Charging (USB). I now use AC inverter and it charges just like a wall charger.
Click to expand...
Click to collapse
I suspect you need to find one which properly follows the USB Battery Charging Specification. That link is to the most recent version, which came out on 7Dec2010 (remember Pearl Harbor!). Version 1.1 is easier - a Dedicated Charging Port is indicated by shorting together the data lines (the two middle conductors on a full sized USB connector. By doing so, it indicates the device may try to draw up to 1.8 A of current (although a dedicated charging port is allowed to limit the current to less than that, it must provide at least 1.5 A).
I bought a cheap USB hub with 5 ports, used an exacto knife to cut the traces going to the data lines (the middle two) on all the ports, and then shorted them together on each port. It's now no longer a USB hub, but a USB charger with 5 ports I can used to charge stuff (phone and Bluetooth, quite often). The AC adapter which it came with does 2 Amps. My Thunderbolt says "Charging (AC)" when plugged into it.
So, if you can open up one of your adapters, just solder a jumper between the middle two contacts (make sure they're not connected to anything else).

Just got the Rocketfish premium microUSB at Best Buy and it has a captive coiled cord and a USB port. TBolt says "AC plugged" and reads +670 mA.

Good choice on the Motorola Rapid Charge - I've burned through 3 other cheap car chargers trying to keep my phone alive while using Google Nav and this is the first one to work!

i have the rapid motorola one on amazon

lippstuh said:
i have the rapid motorola one on amazon
Click to expand...
Click to collapse
+1 Works great! Battery widget usually shows about +800mA while only charging. Real close to the wall charger

High current car charger

Anybody come across a car charger that is high current like the HTC wall charger?

Most car chargers are classified as "rapid".

Anything designed to charge an iPad (2.1A versus the typical 1A) will give you plenty of juice. I use the Scosche reVIVE II with Pandora, Bluetooth, and GPS Navigation all on and still have enough power to positively charge my battery.
Fair warning, though, this will cause the phone to get real hot (I've had the overheating warning lights flash twice so far), so make sure you have plenty of ventilation around the phone, keep it out of the sun, etc etc.

Any charger that is at least 1 amp. will do. The phone 'pulls' a max of around 0.85 amps. No need for more then 1 amp.
If it has a replaceable cable, it must be the heaviest gauge, shortest cable, that you can use. I have seen long cheap thin cables that drop over a volt, and the Thunderbolt charges really slowly.
The charger or cable have to state that they for rapid charging. To rapid charge, you need to have the USB D- and D+ lines shorted. If that are not shorted, the Thunderbolt limits the charge current to around 0.35 amps. thinking it is connected to a PC. If they are shorted, letting the Thunderbolt know it can be rapid charged, you get up there around 0.85. You can easily modify the charger for high rate if it is good for at least an amp.
And in the end is heat. Heat and lots of it. It will damage the battery. So put it out of the sun and in cool air like near a vent.

Motorola Rapid Charger on Amazon is the best. I bought two.
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1309959388&sr=8-1
Review off Amazon
Genuine Motorola charger in retail packaging. 4.75-5.25V 950mA output, works w/ most micro-USB phones like Incredible, etc., June 11, 2010
By
David Pearlman "sound fanatic" (Arlington, MA) - See all my reviews
(TOP 500 REVIEWER) (VINE VOICE) (REAL NAME)
Amazon Verified Purchase(What's this?)
There are so many sketchy sellers selling phone chargers out there, that it can be a bit scary. The problem is that if the charger is poorly made, the output of the charger can be out of spec and can, in some cases, fry the phone you connect to it.
For that reason, when it comes to phone chargers, you should stick to name brands. (They are all made in China, but the name brand ones are usually subject to stricter QA).
When I found this charger on Amazon, SOLD BY AMAZON, I jumped on it. It's a MICRO USB car charger, made for Motorola and sold under the Motorola name, in retail packaging. The rated output is 4.75-5.25V and 950mA.
This charger should work fine with most any phone that uses the MICRO USB connector. The key number to pay attention to is the second one, the rated amperage. This is the MAXIMUM amount of current that the phone can request from the charger. A typical USB port on a PC provides as little as 100mA, and few provide more than 500mA. So this charger should charge your phone faster than when it's connected to a PC. A few phones out now can use up to 1000mA. But that just means they CAN use that amount. If 950mA is provided, they'll still charge, just a bit more slowly.
Note that the amperage (second number) merely tells you how much the charger CAN supply, if requested. The phone itself is responsible for asking for the current. That is to say, if this charger can provide 950mA, but your phone can only use 300mA--no problem. Your phone asks for 300mA and the charger provides all of what is requested. If, on the other hand, your phone can use 1000mA, this charger will provide all it can, which is 950mA--a wee bit less than the max asked for. That's also not a problem; it just means your phone will charge a little bit (not much in this case) more slowly. The rated voltage for this charger is presented in a range of 4.75-5.25V. The "ideal" voltage for a USB charger of any type if 5V. And most chargers for home use are rated right at 5V. But car chargers work in a noisier environment and thus you have the range. This is where a cheapo charger can really do damage, as some of them are poorly regulated and can provide voltages that are WAY out of spec. Again, when you can get a name brand charger from a seller you can trust (Amazon) for such a reasonable price, it's very foolish to consider the cheapo no-names.
This is an excellent quality name brand travel micro USB charger at a price that beats the no-name junk from third party sellers. What's not to like?
BE SURE TO ORDER IT FROM AMAZON AND NOT ONE OF THE THIRD PARTY SELLERS, as some of those have been known to make mistakes with respect to what they ship relative to the listing. I can confirm that Amazon is shipping the P513 /89143N charger, as pictured.
Click to expand...
Click to collapse

ddgarcia05 said:
Motorola Rapid Charger on Amazon is the best. I bought two.
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1309959388&sr=8-1
Review off Amazon
Click to expand...
Click to collapse
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.

kr0n1c said:
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.
Click to expand...
Click to collapse
From what I've read in the past here on XDA and on the reviews for the charger (on amazon) you shouldn't have a problem. The second review for the charger on amazon states that the reviewer was looking for a charger which actually charged his phone will using GPS and that he found it. It's a very well built charger and cheap. It's made my Motorola and sold by Amazon so buy with confidence.

kr0n1c said:
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.
Click to expand...
Click to collapse
It does indeed charge. I've had it since my original Droid and was concerned when I updated to the TB but it will charge the TB no matter what you're doing (I've had Nav running while on a phone call with BT and searching the internet and it still showed it was charging). Just be prepared for your phone to get HOT!! Great charger.

worwig said:
Any charger that is at least 1 amp. will do. The phone 'pulls' a max of around 0.85 amps. No need for more then 1 amp.
Click to expand...
Click to collapse
Actually, the phone will pull more than 850 mA. You're probably basing that on using a battery monitor, which only shows the flow of current into/out of the battery. I've seen 800 mA into the battery at the same time I have display, GPS and a phone call going, which is definitely more than an additional 50 mA. It wouldn't surprise me if the phone can take advantage of something more than 1A, since I see a battery drain of more than 200 mA with all of that going when not on the charger.

kr0n1c said:
I've been contemplating buying this one, but I'd like to ask you if it charges your battery with navigation+music going? I have a usb charger in my truck, and with both of those going it just manages to keep my battery level where its at, sometimes losing a % or two.
Click to expand...
Click to collapse
I have that Motorola charger and am a heavy GPS user. It charges the battery as if it were plugged into the wall. You'll be very satisfied.

mike.s said:
Actually, the phone will pull more than 850 mA. You're probably basing that on using a battery monitor, which only shows the flow of current into/out of the battery. I've seen 800 mA into the battery at the same time I have display, GPS and a phone call going, which is definitely more than an additional 50 mA. It wouldn't surprise me if the phone can take advantage of something more than 1A, since I see a battery drain of more than 200 mA with all of that going when not on the charger.
Click to expand...
Click to collapse
No, that was measured at the 5 volt power supply, based upon a lab power supply. I did a lot of experimenting when I developed the charger and phone mount for my motorcycle. And to get the 850ma from the power supply, I used a very short, maybe 8 inch, USB cable, and a charge voltage close to 5.3 volts. With 5 volts at the power supply, it would only pull about 650ma from the power supply. That was due to the voltage drop in the USB cable. With the 5.3 volts at the power supply, I was getting close to an actual 5 volts at the Thunderbolt. I never measured the current at the battery, but I could see it being a bit more then the 850ma in, if there were a switch mode supply in there.
Though I like the Battery Monitor widget as a rough guide, I never tested to see if the battery current and the battery monitor are accurate.

Does anyone know if the included HTC ac adapter and cable will charge faster than using your pc with the included USB cable?

happimeal said:
Does anyone know if the included HTC ac adapter and cable will charge faster than using your pc with the included USB cable?
Click to expand...
Click to collapse
Absolutely.
A PC USB port is limited to under 500ma. The Thunderbolt appears to to limit PC USB draw to about 350ma. I haven't measured the actual current in the HTC charger, but it is a high current charger, and charges my Thunderbolt very quickly. Battery Monitor widget shows high battery charge rates. I suspect it is getting near the max rate up near 1 amp.

worwig said:
Absolutely.
A PC USB port is limited to under 500ma. The Thunderbolt appears to to limit PC USB draw to about 350ma. I haven't measured the actual current in the HTC charger, but it is a high current charger, and charges my Thunderbolt very quickly. Battery Monitor widget shows high battery charge rates. I suspect it is getting near the max rate up near 1 amp.
Click to expand...
Click to collapse
HTC charger states 5V/1A on the charger itself.

You can use the Palm car charger for $3.75+tax, free shipping. it is 5V/1A, same rating as the HTC wall charger.
Go here for 25% off
http://www.wireless.att.com/cell-ph...otion/accessories.jsp?source=EC0A0011600jtl10
Add product here, must add to cart to see 25% discount.
http://www.wireless.att.com/cell-ph...027&q_sku=sku4720234&q_manufacturer=&q_model=
Also, if so inclined, you can lop the top off of the charger so that you can use any usb cable (ipod, iphone, anything)

dpham00 said:
HTC charger states 5V/1A on the charger itself.
Click to expand...
Click to collapse
That doesn't mean much. That is the MAX the charger can output. The amount that the Thunderbolt will pull varies. If it thinks it is plugged into a USB, it will be less then 500ma. even if the charger is capable of 10 amps.

worwig said:
That doesn't mean much. That is the MAX the charger can output. The amount that the Thunderbolt will pull varies. If it thinks it is plugged into a USB, it will be less then 500ma. even if the charger is capable of 10 amps.
Click to expand...
Click to collapse
i have used the Palm car charger, checking with bmw, it shows around 850ma, same as on my htc charger.

worwig said:
Any charger that is at least 1 amp. will do. The phone 'pulls' a max of around 0.85 amps. No need for more then 1 amp.
If it has a replaceable cable, it must be the heaviest gauge, shortest cable, that you can use. I have seen long cheap thin cables that drop over a volt, and the Thunderbolt charges really slowly.
The charger or cable have to state that they for rapid charging. To rapid charge, you need to have the USB D- and D+ lines shorted. If that are not shorted, the Thunderbolt limits the charge current to around 0.35 amps. thinking it is connected to a PC. If they are shorted, letting the Thunderbolt know it can be rapid charged, you get up there around 0.85. You can easily modify the charger for high rate if it is good for at least an amp.
And in the end is heat. Heat and lots of it. It will damage the battery. So put it out of the sun and in cool air like near a vent.
Click to expand...
Click to collapse
um, i am aware that any charger that will do 1A will do. that was my question, what car charger will do 1A. Alot of times, they dont have that info listed on pages that are selling them.
and the whole thing about the D- and D+ shorted together, i do not believe. the HTC cable that came with the phone does rapid charging and i use it for data all the time too. if they D- and D+ was shorted, i would not be able to use it for data transfer. not unless the HTC charger shorts them internally inside the charger.

leoingle said:
unless the HTC charger shorts them internally inside the charger.
Click to expand...
Click to collapse
Bingo!!

leoingle said:
um, i am aware that any charger that will do 1A will do. that was my question, what car charger will do 1A. Alot of times, they dont have that info listed on pages that are selling them.
and the whole thing about the D- and D+ shorted together, i do not believe. the HTC cable that came with the phone does rapid charging and i use it for data all the time too. if they D- and D+ was shorted, i would not be able to use it for data transfer. not unless the HTC charger shorts them internally inside the charger.
Click to expand...
Click to collapse
Yes, it is hard to find the current info online or even on the package sometimes.
Yes, it is shorted in the charger. I have seen it done in the cable and the cable can't be used for data of course. Not sure why anyone would do that, but they do.

Using a HP touchpad Charger bad?

is there any potential damage to my GS2?
the touchpad charger is rated at 2A max output and it charges the phone FAST.
around 5% in 10 minutes. so full charge in 3 hr and 15 minutes.
I have been using this for a few weeks now. No apparent issues, however could i be frying the battery?
I don't know the Amps of the OEM charger cuz my phone didn't come with one 9
(eBay) I'll assume its around 550 mAh-650 mAh.
I was using an Apple iPhone 4 charger (1A) before on my Nexus S as it was faster than the oem as well.
I picked up the HP chargers at Staples on clearance (obviously) for like $8.

I use the same time charger, and I see no negative effects. Your better off using it rather than some ebay knockoff.
Sent from my SGH-T989 using xda premium

3hrs 15 minutes means it is charging the phone at a rate of approximately 600ma/hr (1875mah battery /600 mah charge rate = 3.13 hrs) which is exactly as it should be. Phone will not charge at more than 600-700mah no matter what the charger outputs so you have "power to spare" (but not power to use). So it is perfecly fine. You could use a 100AMP charger if you wanted since the phone will only "take" what it was designed to take. Charge rate is current limited by the chipset in the phone + the kernel for protection. If it were using the full 2amps it would fully charge from ZERO to FULL in around 50 minutes then probably explode.
http://www.youtube.com/watch?v=n0M-ZX2DBxY

so how does that explain the OEM chargers being so ridiculously slow?
are they not in the 500-600 mAh range? when i first got my phone the battery was dead drained. too more than 8 hrs to get full. this was with my Nexus S charger.
I'm not saying the phone is drawing a full 2A of current, but im sure the higher rating doesn't hurt. realistically that's the MAX peak this charger can pump out. Real world, usage, it probably barely breaks 1A on any given day.
on a related note, i KNOW USB cable quality and length play a big role in charging speed.
using an extension USB cable, or cheap one, can easily DOUBLE the charging time.

madman604 said:
so how does that explain the OEM chargers being so ridiculously slow?
are they not in the 500-600 mAh range? when i first got my phone the battery was dead drained. too more than 8 hrs to get full. this was with my Nexus S charger.
Click to expand...
Click to collapse
Good question. The output rating of a charger is rated when it is NOT UNDER LOAD. When you put it under load output drops. A 2amp (2000mah) charger under load will drop as well but maybe to 1500 or even 1000mills. The 1000mills is still above the max charge rate of the device and will of course charge it faster than the 500mill charger when it drops to maybe 400mills.
If it took 8hrs either the charger was defective (low output) or way over rated or something else was at play. Also manufacturers will want to charge as slow as possible to avoid overheating or even fires or explosions.
I have a 120amp 12vdc power supply that I used to use for a 300 watt ham radio amplifier which is hooked up to a multiple cig lighter adapter socket which I use to charge my various multiple devices (iPad 2, 2 cellphones and a couple BT earpieces). I use 3 Scoche 2.5amp output USB cig adapters and the most the phone draws is around 600mah (again, not accurate but reference).
The only way to test is to put a meter across it while charging and see how much current is being pulled. The ATT Galaxy S2 was tested that way and was pulling less than 650mills with a high output rated charger.

Wired and wireless charging speed

Hello all,
I am trying to figure out which is the fastest charger, wired or wireless for the Nexus 5. To do this, I suggest we gather measurements about the charging speed for the phone charging when it has less than 75% charge.
My results are the following so far:
T-Mobile dual usb wall charger 700-800 mA
this ebay Qi charger [1] 200-300 mA
[1] http://www.ebay.com/itm/Wireless-Qi...l_Phone_PDA_Chargers&var=&hash=item51b121c146
Note that the T-mobile dual USB charger was the power source when using the Qi charger and the same microUSB cable was used in both cases.
Does anybody have a wired or wireless charger that can charge faster?
Also, I am using the Elixir 2 app to measure the mA, is there an alternative that does not require the screen on (I feel that it may affect the measurements)?

The one that outputs more mah will charge faster.
Sent from my Nexus 5 using Tapatalk

They're both awful outputs u need at least 1000 mA / 1A output. You can damage the battery with underpowered charge rates
Also that eBay link states 1A output in the description
Sent from my Nexus 5 using Tapatalk

Guys, for the wired chargers, we are not talking about the STATED MAXIMUM OUTPUT here, we are talking about the output IN PRACTICE. Most chargers are rated for instantaneous output (it can output 1A or 2A or whatever is listed on the charger, but only for a millisecond, then the rate will fall off).
Please use the app and let me know what your rates for wired charging are (not that the rates fall off when the device is charged more than 75%, so try to test when the charge is lower than that). I bet the rate you find will be lower than 800mA, but if this is not the case, I am curous on the charger and cable that you use.
As for the wireless charger, I know it is very very bad, am trying to return it.

A poor/cheap usb cable will make a massive difference too. I once had a cable that wouldn't let more than 384mA through it!
Sent from my Nexus 5 using Tapatalk

Exactly! This is why I picked the cable I am using now, but I could not get over 900mA with this combination of cable + charger. The Charger is a T-mobile dual USB 3A charger and in my opinion it is very good.

The stock wired charger is rated for 1.2A and actually charges at just over 1 A. The charging chipset in the phone limits charging to 1.5 A max.
The nexus wireless charger charges at 750 mA max. Bad positioning and cases will reduce wireless charging efficiency though.
http://www.anandtech.com/show/7517/google-nexus-5-review/3

I've noticed that during wireless charging my phone will charge at 500-600mA up until 85-87% and after that it will charge at 300mA to 100%, so make sure when you are testing to test at lower battery capacity. Also, try wireless charging from a USB port of a computer, I've noticed that I got better performance form USB port than from 2A touchpad charger.
Sent from my Nexus 5 using XDA Premium 4 mobile app

Wired charging is always going to be faster than wireless charging. Wireless charging on the Nexus 4 Orb takes about twice as long as charging via the supplied wired charger with the Nexus 5. Technology is going to have to advance quite a bit before wireless charging eclipses wired charging. There is an inherent inefficiency with wireless charging that wired charging does not have.

i bough one of those white, skewed ones off ebay for 10€ shipped and am pretty happy with it!

Any indication that Quick Charge 2.0 is active?

Is there any kind of indication on the phone that Qualcomm quick charge 2. 0 is active when it is connected to a certified charger?
I bought both in AC and DC certified charger. both were very highly rated on Amazon. The AC charger for example is made by Anker.
The app Ampere reports a low milliamp rating of around 250mA when I am using either of these two chargers.
When I connect two different chargers that are not quick charge 2.0 certified then Ampere reports a charging current of upwards of 1800mA.
I suppose the issue could be Ampere, that it doesn't know how to measure when the quick charge technology is present. Does anyone have any direct experience with this to know what the issue is?

When I use my 2.0 Charger I can go from dead to full in about an hour. So yeah i'd say it's active!

Even with a QC 2 charger, you won't see high charge rates unless the battery is low. All chargers will slow down as the battery charges. That's just how they work. I have also seen cables make a difference. I have some right and left angle cables from Star tech that will only charge at one amp. Samsung and HTC OEM cables will allow charge rates above one amp. Finally, most programs display the charge rate after subtracting the power that the phone is actively using.
Ex, your charger is 1.5 amp, the phone is awake and playing a game taking 800 milliamps, at full power you phone can only charge at 700 milliamps as that is the charger's maximum output.

Deleted, issue sorted.

The charger supplied with phone is not quick charge compatible.
(At least in UK )
HTC do sell a quick charge 2.0 compatible charger as an accessory.
Sent from my HTC One M9 using XDA Free mobile app