Related
I cannot wait for the official galaxy S3 wireless charging kit to come out.
I got inspired by the Galaxy mod that was done by using parts from a Palm Touchstone cover.
ww.qianqin.de/2011/09/28/high-waf-inductive-charging-mod/
I am pretty sure, that I don't need to do an intrusive operation as the one in the link - I believe that Samsung made pins ready for it under the cover.
Does anyone know what the two 'pins' that are exposed to the left of the battery are for?
Thanks!
There are countless threads regarding the "pins", wireless charging kits, and that mod.
I have a touchstone. And a back, and would like to see if anyone has applied this to the S3 and made it work
Sent from my GT-I9300 using xda premium
I have a feeling the wireless charging module will interact somehow with the two pins next to the battery. I was planning on attempting this mod using these pins but without a multimeter i am unable to tell whether these pins can be used and which way round to wire them up. If anyone can assist i would be grateful.
BungeBash said:
There are countless threads regarding the "pins", wireless charging kits, and that mod.
Click to expand...
Click to collapse
Yes. Countless threads about the mod for the Galaxy S, but I haven't been able to find anything about pins on the Galaxy SIII.
- Maybe I'm just bad at searching, believe me I have tried!
I also would love to know if and how someone gets their sgs3 working with the palm touchstone! Hope it is not too difficult!
pcyyijb said:
I have a feeling the wireless charging module will interact somehow with the two pins next to the battery. I was planning on attempting this mod using these pins but without a multimeter i am unable to tell whether these pins can be used and which way round to wire them up. If anyone can assist i would be grateful.
Click to expand...
Click to collapse
I have finally managed to find a page that claimt that the two pins next to the battery indeed are for wireless charging.
ww.trustedreviews.com/samsung-galaxy-s3_Mobile-Phone_review
Only problem is, I don't know Trusted Reviews - so I don't know how 'Trusted' they are?
All I need now is to find out which pin is 0V and which is +5V. (I'm pretty sure that the current is the same as the Palm cover provides.
Every accessories are always made for on pin, hdmi,wireless kit etc. Always Samsung market tactics.
I wish you'll do it.
Upper pin is plus, lower minus - and it has also be done!
http://www.android-hilfe.de/zubehoe...-samsung-galaxy-s3-ohne-kabel-aufladen-6.html
I'm also trying to do that, hopefully it works
N23 said:
Upper pin is plus, lower minus - and it has also be done!
http://www.android-hilfe.de/zubehoe...-samsung-galaxy-s3-ohne-kabel-aufladen-6.html
I'm also trying to do that, hopefully it works
Click to expand...
Click to collapse
Yes it works, it will be a little slower, im only seeing 450mah going in as opposed to about 1000mah
But that doesnt matter in the slightest as i mostly charge overnight
that is great news! That does not look too difficult and it looks as NFC is not touched. Just the translation is difficult and not knowing what samsung wireless charging is about.
I also wonder how snug the fit is after adding the magnets from the touchstone back cover?
I will post details soon when i am back home
Sent from my GT-I9300 using xda premium
I'm still waiting for my touchstone and palm battery cover to arrive...
I found this! He looks like he did a great job. I am just curious if he had to solder anything to the phone?
http://www.youtube.com/watch?v=uAqP3T_Mbzg
yes he did, i'm gonna try it with just tape - his solder blobs seems to be huge and because of the the cover makes this bulge... maybe then it will fit perfectly
the samsung wireless charger looks nice but i like the idea with the magnets of the touchstone!
please post pictures and a possible video. This is so interesting!
i'll do as soon i get the touchstone kit and have some spare time to do this (hopefully on sunday...)
what happens when you place an induction charging compatible device on an induction cooking range? Will it charge the battery, or will it overload the circuitry and destroy the phone\battery?
I wonder what happens when you plug in the phone with usb while it's inductively charging.
Zabalba said:
I wonder what happens when you plug in the phone with usb while it's inductively charging.
Click to expand...
Click to collapse
I would think they would work together or one would be disabled by the other. Don't think they would allow both if it could cause damage.
Sent from my SPH-D710 using Tapatalk 2
In your opinion, how hard would it be to modify a case/back panel for the Glide, so that it has inductive charging support? I just saw a video online of someone internalizing an iPhone 4/4S charger, with only slight structural modifications (it had the appearance of no case on the outside), and was thinking that I might be able to do it to my Glide. At the moment, I am using a Body Glove case, made of rubber-coated plastic (the only one AT&T sells/sold for the Glide), and my best guess is that the case is about 3mm in thickness. I am looking for no actual phone modifications here (except for wiring the case to the battery, and maybe a modified back cover), so does anyone have any thoughts/ideas/suggestions?
Interesting. There is a company selling those inductive charging mats. I believe there is a connector that plugs to our phone (micro USB) to work with it. You could buy that and try to modify the phone back panel and a case to add the necessary hardware.
Sent from my SGH-I927 using xda app-developers app
---------- Post added at 07:30 PM ---------- Previous post was at 07:25 PM ----------
The companies name is Duracell powermatt.
Sent from my SGH-I927 using xda app-developers app
I saw this, and figured that's what I was going to use. However, It looks as if the case for most phones adds quite a bit of thickness. I looked at another guide, which involved ripping up a Palm Pre back, soldering some things together, and using the Touchstone mat. As for whether or not that would work with a Powermat, I am not sure.
a_p3rson said:
I saw this, and figured that's what I was going to use. However, It looks as if the case for most phones adds quite a bit of thickness. I looked at another guide, which involved ripping up a Palm Pre back, soldering some things together, and using the Touchstone mat. As for whether or not that would work with a Powermat, I am not sure.
Click to expand...
Click to collapse
I've seen that guide, it was for the galaxy s3.
It looks like that phone has the two charging pins below the back cover; looking at the glide, I can't see them.
I fear we would need circuitry or at least more complicated wiring to make it work.
The one I saw was for the original Galaxy S. You may have seen a different one. The video I saw showed him wiring some things directly to the battery, if I remember correctly.
any progress
Hey there!
I found this thread as THE only one where someone imagining about the glide having the possibility to charge inductively.
any new info about it?
@a_p3rson: did you find a way to do it?
I would love to see it becoming true..
best regards
jay
So far, the best chance I've seen was using the induction sticker on the back for the Palm (pre I believe), and wiring it to the USB port. I think that would work pretty well, though I am worried with how it would affect the normal function of the USB port. If anyone wants to try it (and share the results), by all means, please do so!
EDIT: It wouldn't be possible to wire the sticker directly to the battery, right? Of course, without causing overcharging/overheating/general harm/etc. to the battery or any part of it?
just throw it out there i have a extended battery from amazon it is about twice as thick as stock batter new back cover has large empty space between camera and batter pack i mean could put flash drive with room to spare in there would be easy to add some new hardware in there if need be for you power matt bought mine of amaxon for 11.00
og anarchy said:
just throw it out there i have a extended battery from amazon it is about twice as thick as stock batter new back cover has large empty space between camera and batter pack i mean could put flash drive with room to spare in there would be easy to add some new hardware in there if need be for you power matt bought mine of amaxon for 11.00
Click to expand...
Click to collapse
I seem to remember the sticker on the Pre being really thin - like paper thin. Plus, I really am against cosmetic things like that (e.g. large back, extended battery), so an extended back shouldn't be needed.
However, I do know that the guide that I found (for the Galaxy S) said that it was possible by just wiring the sticker to the charging ports in the USB connector. The only worry I have is if the phone's USB communication would be affected at all.
If it is possible to just directly wire into the charging ports, there appears to be an easily removable panel directly above the microusb port that would presumably give access to it. I'm at work right now, so I can't exactly check, just puttin it out there.
Sent from my SGH-I927 using xda premium
Tyfighter said:
If it is possible to just directly wire into the charging ports, there appears to be an easily removable panel directly above the microusb port that would presumably give access to it. I'm at work right now, so I can't exactly check, just puttin it out there.
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
Did you ever see if it was possible to hook the induction sticker to the USB port from here? I just looked at the panel, and it actually looks like there is a sticker that contains some wires going to the main board on that plate, makes me think that it could be an antenna of some sort, and that it might be kind of hard to deal with.
Hi guys!
I'm new to XDA (at least as an active user) and this is my first post. As probably most of you I like my Moto 360 not only, but also because it just looks elegant. And so I thought I need an appropriate docking station for it (dock, holder, stand - call it whatever you like) So I made my first "prototype" today and this is what it looks like (pictures attatched).
Right now it is just a modern holder made out of leather, wood and some metal parts.
In the next step I want to include wireless charging (already ordered electronic parts) and see if I can charge my moto 360 on it. What do you guys think? I manly did it because there simply is no other holder than the one from Motorola on the market right now.
Thanks for reading and have a great day!
That looks great! What got you thinking to make your own holder?
Sent from my SM-N900V using XDA Free mobile app
Parker Iverson said:
That looks great! What got you thinking to make your own holder?
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
Thank you!
Well I mean the one from Motorola is also not bad, I like it! But I think this holder matches better to my phone (and its wristband). Also I have a lot of free time recently so I wanted to do something
Pretty cool! I'd been thinking about doing something like that myself, also out of wood and/or leather, because I love both materials.
In any case, it would be really nice if the Moto 360 was completely compatible with all Qi chargers, so that it would be an easy job to gut an existing Qi charger and stuff it into your own enclosure. The only problem is, I've found that the Moto 360 doesn't charge very well using any of the other chargers I've tried. It appears that the stock Motorola dock has some type of overheat protection and can more or less continuously charge the Moto 360 to full. With all the other Qi chargers I've tried, the Moto 360 seems to overheat and stop charging until it cools down. The result is that the watch will tend to stop charging, then continue charging, then stop, then start, and it takes much longer to charge to full. Sometimes, the charging doesn't continue until you take the watch off the charger and let it cool for a bit, even though the watch may show the charging screen.
Your best bet for now is to gut a standard Motorola dock, unless a third-party has managed to make a decent replacement. Good luck!
EDIT: Might be worth checking out this thread to see what Qi chargers would be a good idea to harvest for parts for your project: http://forum.xda-developers.com/moto-360/accessories/compatible-qi-chargers-t2874675
new charger
Look for "moto 360 charger" on etsy.com
What do you think of this?
The one in the zebrawood? Looks nice, but again, I'd be concerned about the actual charging components, unless they used parts from the Motorola dock.
Yes, the one with Zebra wood (I'm new here so they don't let me post external links yet).
I built this charger. I used a QI modul I found on the internet (not a finished product, just the electronic part) and a nice piece of wood from the wood store. As an adapter I first tried the one that comes with the original charger but that one seemed to be too weak so I used the one my Moto X came with. And I have to say it works pretty good. Since that I haven't had any issues yet. The watch charges in about 90 minutes from 0 to 100%. Yes, it does get warm, but not hot. And I think it also gets warm with the motorola charger.
If you have any other questions, let me know!
And thanks for the link to the other thread, I will post my charger there as well. :good:
So I'm looking into the possibility of making a wireless charging solution on my own. I have lots of wireless chargers at home, work, in the car, and I would really benefit from getting wireless charging working.
I took a USB Qi charging coil and soldered wires, which I then attached (well, just touched ) to either end of the magnetic connector, and it worked.
The difficulty I'm facing is, how can I keep these wires touching the magnetic charging port semi-permanently without doing anything dangerous like attempting to solder it directly.
So I'm wondering if anyone has any neat ideas of how I might rig this up. Any ideas would help a lot! If I come up with something good, I'll make a guide so others can do it.
You could try to get someone to 3D print a side piece similar to the one on the Z3 wireless charging case from sony: http://www.sonymobile.com/us/products/accessories/wireless-charging-cover-wcr14/
Have them leave chambers to run the wire through.
JCBomb said:
You could try to get someone to 3D print a side piece similar to the one on the Z3 wireless charging case from sony: http://www.sonymobile.com/us/products/accessories/wireless-charging-cover-wcr14/
Have them leave chambers to run the wire through.
Click to expand...
Click to collapse
I've been thinking about making my own wireless charging case similar to the sony branded case but using high quality leather, and an oem qi charging circuit with a 3d printed base clip with the circuit connectors integrated into the clip, just to ensure constant connectivity.
just looking into prices for scrap leather now.
duraaraa said:
So I'm looking into the possibility of making a wireless charging solution on my own. I have lots of wireless chargers at home, work, in the car, and I would really benefit from getting wireless charging working.
I took a USB Qi charging coil and soldered wires, which I then attached (well, just touched ) to either end of the magnetic connector, and it worked.
The difficulty I'm facing is, how can I keep these wires touching the magnetic charging port semi-permanently without doing anything dangerous like attempting to solder it directly.
So I'm wondering if anyone has any neat ideas of how I might rig this up. Any ideas would help a lot! If I come up with something good, I'll make a guide so others can do it.
Click to expand...
Click to collapse
Have you tried tape? It would be covered up by your case anyway, right?
PuffDaddy_d said:
Have you tried tape? It would be covered up by your case anyway, right?
Click to expand...
Click to collapse
I've thought of tape but I've yet to figure out a way to tape it where it will definitely stay in place.
I might be able to get a case that would cover it, but my current cases have holes so that magnetic chargers could be plugged in.
I've decided to try using copper tape to connect a Qi coil to the magnetic dock port. I'll see how it goes. Hopefully it will be as easy as I'm hoping it will be.
So I finally managed to make it work. Unfortunately, I had to solder.
I gave up with trying to line things up just right and keep it in place, so I just soldered a Qi receiver to the magnetic charging port, wrapped it around to the back of the phone, and fit in a case. It charges wirelessly now, so I'm happy. Unfortunately, I don't know if I'll ever be able to clean it up in the future if I want to sell the phone. But to me, wireless charging was super important. I was also able to continue using my Z1C battery case which uses the magnetic port, so I'm pretty happy with the end result.
Pics?
it's ugly, but I'll put up pics when I get a chance.
Pictures as promised. I had been concerned adding this might block NFC, but NFC works just fine. Obviously, magnetic charging cables don't work (but a Z1C charging case I have does.)
It adds some thickness behind it so the case doesn't fit quite perfectly, but well enough to stay on. I didn't have thinner cables, but having some might have been able to decrease the thickness. Also, I'm not necessarily good at soldering, so I just did what I could.
But I can charge it on my bedside table and in my iOttie Qi dock in my car, so I'm cool with it.
hmm not pretty, but i guess it works. how is the charging speed?
you should be able to clean it up fine if you use some solder wick.
Awesome job!
Can you please give us a link for the receiver?
All I can find are with usb
ugly doesn't even start describing it... seriously, you ruined that phone. You could've cannibalized a 3rd party docking station instead
duraaraa,
Thanks for blazing this trail for us, mighty brave to solder to your phone like that! Now that you've had this set up for a few weeks, is it holding up ok? I'd just about give my left nut for an actual phone case that simply has a wireless receiver built in and taps into the magnetic charger pins, but I doubt anyone will ever make one since (I believe) the Z3C is discontinued. I mean, they make those giant external battery packs for the Z3C that use the pins, so why not a qi-compatible one??? Anyway, no way I'm soldering to my pins so I'm basically trying to mold a connector out of epoxy that I can squeeze between the side of the case and the pins. (Basically I pushed one of my magnetic cable connectors into a clay bar and filled w/epoxy.) It's still drying so I have no idea if it's feasible at all, but wanted to pop in and say thanks for the inspiration.
mralexsays said:
duraaraa,
Thanks for blazing this trail for us, mighty brave to solder to your phone like that! Now that you've had this set up for a few weeks, is it holding up ok? I'd just about give my left nut for an actual phone case that simply has a wireless receiver built in and taps into the magnetic charger pins, but I doubt anyone will ever make one since (I believe) the Z3C is discontinued. I mean, they make those giant external battery packs for the Z3C that use the pins, so why not a qi-compatible one??? Anyway, no way I'm soldering to my pins so I'm basically trying to mold a connector out of epoxy that I can squeeze between the side of the case and the pins. (Basically I pushed one of my magnetic cable connectors into a clay bar and filled w/epoxy.) It's still drying so I have no idea if it's feasible at all, but wanted to pop in and say thanks for the inspiration.
Click to expand...
Click to collapse
hows your build coming along mate I'd love to see how it looks.
kstanley7 said:
hows your build coming along mate I'd love to see how it looks.
Click to expand...
Click to collapse
Not good I'm afraid my friend... My first attempt (trying to mold a connector out of epoxy using a clay mold) failed, the thing came out looking like a chewed up piece of gum and just wouldn't work. My next attempt involved slicing up a couple of cheap magnetic adapters and cables to try to trim down the connectors to something reasonably sized, but they become really brittle when you cut them that thin... Unfortunately, I think it'd take someone with some type of plastic molding equipment or maybe a 3d printer (that is capable of making really small, fine-detail parts) to make this thing. I'm still disappointed that Sony makes a wireless case for the Z3, but not the Z3C, but I've also come to realize that the Z3C has such good battery life that maybe I don't really need such a case. (I come from a long line of Nexus, HTC, and Samsung devices so I've become somewhat of a charging addict!)
tl;dr: Just enjoy the Z3C and use the handy magnetic dock for overnight charging.
just looking at the magnetic connectors on the z3c I think there might be a way but it'll add a couple more mm to the height, would need to get someone with a 3d printer, but if the wallet is made of leather and is inserted underneath, with the qi wireless pad, and two wires made into connection terminals which would then clip onto the phone so a solid connection is made between those terminals.
Just to answer some questions, it's held up. I think it's fine -- anyone desperate for Qi should just bite the bullet and solder. Charging speed is similar to really any other Qi-charged device.
apis10 said:
Awesome job!
Can you please give us a link for the receiver?
All I can find are with usb
Click to expand...
Click to collapse
Sorry my response is so late!
It's the USB type. I un-soldered the USB ribbon and soldered a wire for the two connections.
So you would want to buy the USB version, I think.
Look into copper tape. I attempted this a little while back but I think my charging pad wasn't powerful enough. What charging pad are you using?
I've been on Youtube for the last hour reviewing magnetic qi car chargers.
Obviously, they all differ considerably for each phone.
I'm looking for one that just has a flat front surface with no arms or clamps, so this means that a magnet of some kind has to go on the phone cover that I have on my P5.
There are vent and windscreen mount versions, I'm looking for one that is as unnoticeable as possible, so forget the windscreen mount type.
Has anyone got any experience with one of these. Whatever I get must not interfere when charging my P5 on the Google Pixel Stand.
Thanks
How is your phone going to stick to a magnetic mount?
With a metal plate inside the phone cover, placed carefully so it does not interfere with the wireless charging on my Pixel Stand and whatever I get for the car. I've had a normal magnetic mount in the car before using this method and it did not interfere with the wireless charging, as long as its placed properly.
The problem with the Pixel 5, and, to some extent, all phones with wireless charging, is that the location of the space for positioning the metal plate is either at the very top or the very bottom of the phone, thus making the phone either very bottom heavy or top heavy and prone to sliding and slippage.
Apple's MagSafe gets around this because their magnetic mounting system is built around the charging coil so as to not interfere with charging and provide a multipoint magnetic connection that is centered, more secure, and stays in alignment.
The only alternative that I've found that works for Android phones and works well is a system like the Mous Limitless system of cases and accessories. I've been using their case, card wallet, and charger mount for about a month now and they are great. If you want more info on them you can just read my post in the thread below this one where I detail my experience with their products. They also have their own info and explainers on their site at mous.co.
jallenhayslett said:
The problem with the Pixel 5, and, to some extent, all phones with wireless charging, is that the location of the space for positioning the metal plate is either at the very top or the very bottom of the phone, thus making the phone either very bottom heavy or top heavy and prone to sliding and slippage.
Apple's MagSafe gets around this because their magnetic mounting system is built around the charging coil so as to not interfere with charging and provide a multipoint magnetic connection that is centered, more secure, and stays in alignment.
The only alternative that I've found that works for Android phones and works well is a system like the Mous Limitless system of cases and accessories. I've been using their case, card wallet, and charger mount for about a month now and they are great. If you want more info on them you can just read my post in the thread below this one where I detail my experience with their products. They also have their own info and explainers on their site at mous.co.
Click to expand...
Click to collapse
Thanks for that and the mous info, funny, I was looking at their products online just last night. I think I'll have a closer look.
Cheers
152bobby said:
Thanks for that and the mous info, funny, I was looking at their products online just last night. I think I'll have a closer look.
Cheers
Click to expand...
Click to collapse
Actually, just one other question, does the Mous cases work perfectly with the Pixel stand ? If I go down the Mous route, I have to do my research thoroughly, because a case and a car qi charging pad is not cheap !!
I would imagine there would be no magnetic attachment compatibility if the phone attaches to the Pixel Stand magnetically, but, as far as wireless charging, to the best of my knowledge it does not interfere with any other wireless charging devices.
I have two Anker wireless chargers, one pad and one stand, and I haven't had any trouble with either one.
Is there a preferred cigar/cigarette adapter to use with the Mous wireless chargers . If I'm going to cough up this amount of money to accompany a already expensive phone purchase, why skimp on the adapter
They supply a USB-C lighter port adapter as well as a braided USB-C cable with the charger mount, but I also have an Anker port adapter with USB-C and USB-A and it works as well.
Also, just for good measure, I thought I'd also attach a front and rear photo from my mount, to give you an idea of what it would look like.
Just remember, as per my post in the other thread, if you don't want to use the supplied vent clip, which I advise against as it's not very secure, you'll need a mount from another device with a 17mm ball joint. I previously had an iOttie One Touch CD slot mount and it worked perfectly.
Excellent information, much appreciated, thanks. I'll update you with my progress.
152bobby said:
Excellent information, much appreciated, thanks. I'll update you with my progress.
Click to expand...
Click to collapse
Thanks. I have placed my order for the P5 case and the vent mount adapter (my intentions is to try the vent mount, if no good, I'm sure I can detach the mount part at the rear and attached it to my car dash with double sided tape). I did manage to contact Mous and they kindly gave me a 20% code for my first order
152bobby said:
Thanks. I have placed my order for the P5 case and the vent mount adapter (my intentions is to try the vent mount, if no good, I'm sure I can detach the mount part at the rear and attached it to my car dash with double sided tape). I did manage to contact Mous and they kindly gave me a 20% code for my first order
Click to expand...
Click to collapse
If the tape method doesn't work, some of these options might. Just make sure the ball is 17mm. They all seem to be around $10, so not terrible, and cheaper than buying an entirely separate mounting system just for the ball joint.
Thanks, I've been looking at these, should I need one. However, I don't see these with the part that would go on the rear of the Mous charging pad for the ball part to click in to ?
152bobby said:
Thanks, I've been looking at these, should I need one. However, I don't see these with the part that would go on the rear of the Mous charging pad for the ball part to click in to ?
Click to expand...
Click to collapse
The ball cup and threaded nut are on the back of the charging pad.
Of course it is, I've just looked at the Mous air vent mount....I knew I shouldn't have had another beer !
Thanks, I'll see how it goes when it arrives.
152bobby said:
Of course it is, I've just looked at the Mous air vent mount....I knew I shouldn't have had another beer !
Thanks, I'll see how it goes when it arrives.
Click to expand...
Click to collapse
My Mous items arrived today. The case fits nicely, the car air vent actually works well in my car, but I can see it pulling off the vent eventually when removing the phone, but it's not where I want my phone. So I have ordered a 17mm ball joint from Amazon, so I can have it exactly where I want my phone to sit in the car. I've tested the wireless charging and magnetic strength and all is good. I have also tested the wireless charging on my two Pixel stands and my Anker stand also and they all charge fine through the case. So all good for a while . Looking at the case in more detail and feeling it, I have high confidence in this case protecting my phone should I drop it. Thanks for the help I've had in making a decision for this purchase.
**UPDATE**
So I have had both the car wireless charger and the Mous case for my P5 for nearly a week now and I have come across a charging issue. I emailed Mous customer support about it and got a reply today, which to be honest, does not really help me and I think they almost admit that the Mous products are not all they are cracked up to be. They refer to iphone (which certainly does not help me).They have offered a full refund, but I am going to do some more testing myself, as I have a 2 hour drive to do tomorrow and I "think" the issue I am having is to do with me using Android Auto (Google Maps) wirelessly in the car whilst charging, I'm not exactly sure yet, but I am not replying to them until I have done this final test. I am going to use wireless Google Maps for half of my journey with the P5 on the charger and the other half with the phone just sitting on the charger charging with no Google Maps on.I have copied and pasted their reply below, my original message to them, is at the end of their reply, so read this first before reading their reply and possibly give me your thoughts ?
Hi Bobby,
Thanks for reaching out to us and I’m so sorry to hear that you’ve had some issues with your Wireless Charger.
I've had a word with our tech wizards, and they have suggested that you please see possible troubleshooting advice for your phone not charging correctly below:
1. For Apple users: Apple is frequently updating their firmware, which affects the wireless charging system. Therefore some of Apple's own updates could make wireless charging worse or better while they are tuning the software.
2. Wireless charging works by transmitting power from one coil of wire to another, however, the alignment of these coils is very important to transmit the power efficiently. Please make sure that your phone (even without a case) is positioned correctly and centrally, as this will improve charging time and efficiency.
3. Please ensure the voltage is set to the highest possible output to ensure your charger has the best chance of functioning through our case. Some wireless chargers will not have enough power to transmit power to the phone with a case on so make sure you are using a wireless charger that has power from the mains or uses a high-quality USB adaptor supplying more than 1.2 Amps.
4. We will soon be launching Mous wireless charging accessories which are designed to work seamlessly with our cases and will perfectly auto-align the receiver and transmitter coils in the phone and charger.
However, I can appreciate that this is not relevant for everyone, so you are welcome to return your Car Mount if you still wish.
We look forward to hearing from you.
Best regards,
Richard
Customer Experience Advisor
Mous Products Ltd.
On Mon, 24 May at 1:28 AM , Bobby McLeish
Click to expand...
Click to collapse
wrote:
Hello, I have only had my Mous items for a few days. I think there is a issue with my charging pad. It seems to only charge my phone for about 5% and then stops, if I leave the phone attached to the charging pad, it starts to charge again after about 10 minutes and then repeats this. The charging pad itself is quite hot, I think the charging pad is turning itself off when it gets too hot, so I suspect the charging pad is faulty ? I am using the official Mous Pixel 5 case and also the cable and car charger plug which came with the charger. I have ensured that there is no hot air coming from the cars air vent (it is completely off). I think this needs to be replaced, can you get back to me on what to do about this ? Thanks, Bobby.
Click to expand...
Click to collapse
152bobby said:
**UPDATE**
So I have had both the car wireless charger and the Mous case for my P5 for nearly a week now and I have come across a charging issue. I emailed Mous customer support about it and got a reply today, which to be honest, does not really help me and I think they almost admit that the Mous products are not all they are cracked up to be. They refer to iphone (which certainly does not help me).They have offered a full refund, but I am going to do some more testing myself, as I have a 2 hour drive to do tomorrow and I "think" the issue I am having is to do with me using Android Auto (Google Maps) wirelessly in the car whilst charging, I'm not exactly sure yet, but I am not replying to them until I have done this final test. I am going to use wireless Google Maps for half of my journey with the P5 on the charger and the other half with the phone just sitting on the charger charging with no Google Maps on.I have copied and pasted their reply below, my original message to them, is at the end of their reply, so read this first before reading their reply and possibly give me your thoughts ?
Hi Bobby,
Thanks for reaching out to us and I’m so sorry to hear that you’ve had some issues with your Wireless Charger.
I've had a word with our tech wizards, and they have suggested that you please see possible troubleshooting advice for your phone not charging correctly below:
1. For Apple users: Apple is frequently updating their firmware, which affects the wireless charging system. Therefore some of Apple's own updates could make wireless charging worse or better while they are tuning the software.
2. Wireless charging works by transmitting power from one coil of wire to another, however, the alignment of these coils is very important to transmit the power efficiently. Please make sure that your phone (even without a case) is positioned correctly and centrally, as this will improve charging time and efficiency.
3. Please ensure the voltage is set to the highest possible output to ensure your charger has the best chance of functioning through our case. Some wireless chargers will not have enough power to transmit power to the phone with a case on so make sure you are using a wireless charger that has power from the mains or uses a high-quality USB adaptor supplying more than 1.2 Amps.
4. We will soon be launching Mous wireless charging accessories which are designed to work seamlessly with our cases and will perfectly auto-align the receiver and transmitter coils in the phone and charger.
However, I can appreciate that this is not relevant for everyone, so you are welcome to return your Car Mount if you still wish.
We look forward to hearing from you.
Best regards,
Richard
Customer Experience Advisor
Mous Products Ltd.
Click to expand...
Click to collapse
Is it a slow charging issue? One thing I've noticed with wireless car chargers is that, even when they are getting full power, they can't keep up with the power drain from using maps and other apps. I can't say if this applies to iPhone as well, since my last iPhone was the 4s, and I only have experience with the wireless on the Pixel 5, but whenever I run Google Maps and listen to Spotify at the same time, the power draw and charging hit a sort of break-even.
The Mous charger is a little bit better since it uses USB-C, but my previous charger that used Micro-USB couldn't keep up. I also think heat plays a role in it as well. Hot, sunny days on the dashboard seem to keep the phone hot. Add that to the heat produced from the wireless charging and you've got a recipe for faster battery drain. That's just speculation, though, so don't quote me on that.
All that said, I have noticed it stopped charging a couple times recently on particularly hot days, but once I got moving and the AC had time to cool the inside temperature down it started charging again. I also have both of the vents on the left and right side of the charger aimed directly at the mount to help get more airflow around it.
I haven't seen it happen enough to show cause for concern, but if yours is cutting out that often then it may actually be faulty. If you haven't already, try a different USB-C car adapter. If it does the same thing, take it inside your home and plug it into a USB-C wall charger. My guess is, if it's not a faulty pad, that it's either a car adapter or heat issue, and trying those two things will eliminate one or the other, or maybe both. Finally, just for good measure, if it's still an issue, try a different USB-C cable. Sometimes it's just that simple.
Just a sidebar, if you use Discord on your phone, consider closing it when not in use. I've noticed since their latest update that it burns through my battery to the tune of about 20%/hr when I'm on 5g.
I've been researching this one. It has a heafty price but, reviews have been majorally positive.
I have the Mous Limitless 3.0 case and the wireless charging vent mount with my pixel 5. Had them for about 4 months. The case and mount work very good. Magnets are strong. I've never had the phone fall while driving and it charges at 15w reliably for me. Both vertically and horizontally. I think it's important that you use the included cable and cigarette lighter adapter.
I have an Anker Qi desktop charger and it charges at 15w through the Mous case. Not magnetic, though.
Downside for the Mous is the whopping price tag. I also think the case is a bit bulky but I'm used to it now.