Develop Bugs

[Q] Kindle Fire Bricked: exec "system/bin/sh": No such file or directory

I've looked everywhere for an answer to my question and have yet to find an answer. Probably because my Kindle Fire is truly bricked for good. But here is the series of events that lead to my current predicament.
1. I used Kindle Fire Utility 0.9.1 to root and install TWRP.
2. I was ignorant of the uses of TWRP so when I wanted to restore the Kindle to factory settings I did it within the kindle.
3. I ended up in TWRP so I looked up how to force the amazon update to the kindle. I cleared both caches and factory restore and then installed update.zip.
4. When I rebooted I am now stuck on the boot up screen with no access to TWRP. My computer still recognizes the kindle fire, but I can't access the directory of the kindle.
5. I've tried to use fastboot, Kindle Fire Utility, and anything else to knock it out of the boot logo, but I always am stopped by the error: exec "system/bin/sh": No such file or directory

i think you should try to reinstall twrp eighter with kfu or manually
kfu is the easier way - if you will try it manually this would be a good point to start: http://forum.xda-developers.com/showthread.php?t=1414832
then flash one of the prerooted stock images or cm7

b63 said:
i think you should try to reinstall twrp eighter with kfu or manually
kfu is the easier way - if you will try it manually this would be a good point to start: http://forum.xda-developers.com/showthread.php?t=1414832
then flash one of the prerooted stock images or cm7
Click to expand...
Click to collapse
I´m in the same situation. We can´t use kfu because everyrthing it does needs adb shell, wich isn´t working.
I´d love to be wrong, but the only solution we have is getting a factory cable.

adb is'nt working in fastboot - could you give this a try?
fastboot -i 0x1949 getvar product
it should return "kindle"
btw. twrp installation of kfu don't use adb - it works with fastboot

b63 said:
adb is'nt working in fastboot - could you give this a try?
fastboot -i 0x1949 getvar product
it should return "kindle"
btw. twrp installation of kfu don't use adb - it works with fastboot
Click to expand...
Click to collapse
The problem is we are not in fastboot mode. We have normal boot enabled.

your in normal boot and don't have adb available ?
sounds bad - maybe your only solution is really the factory cable !
would you try my last idea ?
do
fastboot -i 0x1949 getvar product
should say <waiting for device>
and power off (hold ~20sec) and power back on before the command times out (~1min)
if we are lucky we should get a response
try it more than one times

b63 said:
your in normal boot and don't have adb available ?
sounds bad - maybe your only solution is really the factory cable !
would you try my last idea ?
do
fastboot -i 0x1949 getvar product
should say <waiting for device>
and power off (hold ~20sec) and power back on before the command times out (~1min)
if we are lucky we should get a response
try it more than one times
Click to expand...
Click to collapse
Thanks, but it doesn´t work. Factory cable is the last hope.

Its not bricked, only missing the .sh in the bin directory. Try these commands from the bootloop screen.
./ adb devices
If device is listed
./ adb reboot recovery

qv775219 said:
Its not bricked, only missing the .sh in the bin directory. Try these commands from the bootloop screen.
./ adb devices
If device is listed
./ adb reboot recovery
Click to expand...
Click to collapse
It reboots the device but not to recovery.
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
osozraz said:
It reboots the device but not to recovery.
Click to expand...
Click to collapse
It looks like flashing the stock rom erases FireFireFire and recovery

osozraz said:
It reboots the device but not to recovery.
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
It looks like flashing the stock rom erases FireFireFire and recovery
Click to expand...
Click to collapse
OK, what you need is a recovery .img file. Once you have the .Ingram file type these commands.
From bootloop screen
./adb reboot bootloader
From bootloader screen
./fastboot flash recovery recovery.img
(Recovery image needs to be named recovery.img)
After flash is done
./fastboot reboot recovery
If have issues from fastboot, reboot the device and from bootloop screen
./adb reboot recovery

qv775219 said:
OK, what you need is a recovery .img file. Once you have the .Ingram file type these commands.
From bootloop screen
./adb reboot bootloader
From bootloader screen
./fastboot flash recovery recovery.img
Click to expand...
Click to collapse
First of all, thank you very much for your help.
I type
adb reboot bootloader
and the device reboots, but
fastboot flash recovery recovery.img
gives the same result as before
< waiting for device >

just a suggestion:
fastboot -i 0x1949 flash recovery recovery.img
or
fastboot -i 0x18d1 flash recovery recovery.img

b63 said:
just a suggestion:
fastboot -i 0x1949 flash recovery recovery.img
or
fastboot -i 0x18d1 flash recovery recovery.img
Click to expand...
Click to collapse
If I am not mistaken, to execute fastboot you have to boot in fastboot mode. My fire is always booting in Normal mode so all fastboot commands i execute have the same result:
< waiting for device >

the adb command suceeded
maybe this helps to get to fastboot:http://forum.xda-developers.com/showthread.php?t=1414832
allthrough i doubt
edit: i saw - we have allready tried - but adb was'nt working before - now it's working ?
edit2: just for info: kfu uses this to switch to fastboot:
adb shell "idme bootmode 4002"
adb shell "reboot"
don't think that this works

b63 said:
the adb command suceeded
maybe this helps to get to fastboot:http://forum.xda-developers.com/showthread.php?t=1414832
allthrough i doubt
edit: i saw - we have allready tried - but adb was'nt working before - now it's working ?
Click to expand...
Click to collapse
Adb works. If I type adb devices it shows my Kindle is connected. BUT when executing adb shell or commands that use the sh like adb logcat it fails with the message from the topic title.
If adb shell were working i could use pokey9000´s program to boot in fastboot.

would need a command like "adb reboot bootloader" but never saw such one
could be creative and try "adb reboot fastboot" but it's a shot in the blue ...
sorry

I think we have the same problem
I think we have the same problem @osozraz. I'll share my experience and add more information that I feel is relevant.
1. I also used Kindle Fire Utility to root my Kindle and install TWRP 2.0.
2. I tried installing CM7, it worked, but figured I'd like to get back to stock firmware.
3. In TWRP, I too cleared both caches, factory restored and then proceeded to install update.zip.
4. When the Kindle rebooted it was stuck on the Kindle Fire boot screen.
Now, I researched and tried a couple of unbricking/debricking methods and failed. Here is what I've observed:
a. My device drivers are fine. If I do 'adb devices' it's recognized by the PC. However if I try 'fastboot devices' it returns nothing at all. I assume
b. I also tried the Kindle Fire Utility. Any command I try to do gets stuck on <waiting for device>. I figured that while KFU commands work on the PC's end, it doesn't work on the Kindle Fire. It's basically as if the Kindle is not connected to the computer (try running some of the commands in KFU with the Kindle disconnected, such as changing the bootmode. It'll still say <waiting for device>).
c. I can't to 'adb root' as it will say I don't have permission. Same with adb 'remount' or even 'adb shell', which from what I've gathered is crucial to this process. I can do 'adb reboot' though. I haven't tried rebooting into restore mode but I will try when I get a new MicroUSB B cable.
d. I can't change the bootmode, it gets stuck on <waiting for device> as I've said in point b. Is there a way to actually know what bootmode your device is in? I'm just assuming it's in normal bootmode because I can get fastboot.exe to detect it on the PC. In addition, KFU returns 'unknown'.
Factory Cable
Of course, there's the method of using a factory cable. I'm trying to create one and from what I've gathered there are two ways to do so: 1) use a breakout board (this one I think is the safest way to go) or 2) hack together one using your existing cable: http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable.html. I'm also still scouring the forums for additional information that may help debrick/unbrick my device without the use of the cable. I'm afraid that I might end up damaging my PC or Kindle if I create the cable incorrectly. I've been following this thread though http://forum.xda-developers.com/showthread.php?t=1392693 because I'm thinking of actually just buying one.
Hopes these all help.

You are probably out of luck and need a factory cable at the moment.
You wiped /system/ or killed its permissions, and thus it is unable to load shell.

@osozraz and @jkspn looks like we all have the same problem. Thanks for all the suggestions. I've tried everything. Looks like the only option left is the factory wire. Only problem is that I have 0 skills with smoldering. I guess I could buy one but the site doesn't look like it will be restocking anytime soon. I'll see if I can't return it to Best Buy.
shop.teamblackhat.info/Factory-style-programming-cable-for-Motorola-FactCable.htm

When it says waiting for device, what happens when you unplug and plug in the device?

[Q]Bricked my Kindle during root, no custom bootloader installed, need help.

I'm stuck on the Kindle File logo boot screen.
I used this client to attempt to root my Kindle. I am rather inexperienced, and tried to apply a permanent root with superuser before installing a custom bootloader. In the process, i think it tried to install FFF, but would take an unusually long time to download and install it. So naturally, as any frustrated noob would do, i tried to X out of the window and unplug my Kindle. Bad idea. Turned it on, and it was stuck on the boot screen.
I've tried using a MOTO factory cable to start it in fastboot, but it would not work. In the Kindle Fire general section, there is a sticky that has instructions on how to unroot it, but the link to download important files just leads to some internet propaganda thing multiupload is hosting or something; I can not download the files.
Any help and instruction would be great. I must warn, I'm rather new to the whole rooting and device modding thing, so I may need some additional instruction. Thanks in advance.

Your just stuck in fastboot shift +right click on kfu tools folder select open command window here power off your device leave it unplugged type fastboot -i 0x1949 getvar product when it says waiting for device plug it in it will power on in the terminal if you get a response product: kindle type fastboot -i 0x1949 oem idme bootmode 4000 hit enter then type fastboot -i 0x1949 reboot it should then boot normal use a standard cable for this not your moto factory cable

[Q] I've bricked my KF, no custom bootloader, Factory cable didn't work. Need help.

I'm stuck on the Kindle File logo boot screen.
I used this client to attempt to root my Kindle. I am rather inexperienced, and tried to apply a permanent root with superuser before installing a custom bootloader. In the process, i think it tried to install FFF, but would take an unusually long time to download and install it. So naturally, as any frustrated noob would do, i tried to X out of the window and unplug my Kindle. Bad idea. Turned it on, and it was stuck on the boot screen.
I've tried using a MOTO factory cable to start it in fastboot, but it would not work. There is a sticky at the top of this section that has instructions on how to unroot it, but the link to download important files just leads to some internet propaganda thing multiupload is hosting or something; I can not download the files.
SOLUTION:
shift +right click on Kindle Fire Utilities tools folder, select open command window here. power off your device leave it unplugged, type "fastboot -i 0x1949 getvar product" (no quotations). when it says waiting for device, plug it in it will power on in the terminal. if you get a response "product: kindle" type "fastboot -i 0x1949 oem idme bootmode 4000", hit enter then type "fastboot -i 0x1949 reboot" it should then boot normal use a standard cable for this, not your moto factory cable

USB_boot with pokey9000's firekit

64_hit_combo said:
I'm stuck on the Kindle File logo boot screen.
I used this client to attempt to root my Kindle. I am rather inexperienced, and tried to apply a permanent root with superuser before installing a custom bootloader. In the process, i think it tried to install FFF, but would take an unusually long time to download and install it. So naturally, as any frustrated noob would do, i tried to X out of the window and unplug my Kindle. Bad idea. Turned it on, and it was stuck on the boot screen.
I've tried using a MOTO factory cable to start it in fastboot, but it would not work. There is a sticky at the top of this section that has instructions on how to unroot it, but the link to download important files just leads to some internet propaganda thing multiupload is hosting or something; I can not download the files.
Click to expand...
Click to collapse
Sounds like your booting to fastboot mode you need to download the drivers so you can set your bootmode back to system
Sent from my Galaxy Nexus using xda premium

Your KF is OK and you need to change the boot mode to normal by following the below commands
fastboot -i 0x1949 oem idme bootmode 4000
or
fastboot oem idme bootmode 4000
then fastboot reboot
from my Amazon Kindle Fire using Tapatalk 2

ammubarak said:
Your KF is OK and you need to change the boot mode to normal by following the below commands
fastboot -i 0x1949 oem idme bootmode 4000
or
fastboot oem idme bootmode 4000
then fastboot reboot
from my Amazon Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
Okay, I'm assuming i can do this through cmd.exe, but what commands do i need to type in to get to the point where i can type these in?

I've fixed it. Thanks to someone over in the Q&A section.
Turns out i was stuck in fastboot.
For anyone who discovers this thread in the future, here was the solution:
shift +right click on kfu tools folder, select open command window here. power off your device leave it unplugged, type "fastboot -i 0x1949 getvar product" (no quotations). when it says waiting for device, plug it in it will power on in the terminal. if you get a response "product: kindle" type "fastboot -i 0x1949 oem idme bootmode 4000", hit enter then type "fastboot -i 0x1949 reboot" it should then boot normal use a standard cable for this, not your moto factory cable

This worked for me, thank you very much.

I have this same problem, but I cannot get my computer to recognize that the Kindle Fire is plugged in. I have tried installing the KFU driver but that doesn't seemed to have worked.

Try the iso I made post 7 http://forum.xda-developers.com/showthread.php?t=1413358 or just run your own http://forum.xda-developers.com/showthread.php?t=1850038

[Q] Newbie trying to make sense of my 1st gen kindle stuck in bootloop?

I read the guide and have been browsing the forums for similar situations.
First of all, many months ago I tried to root my KF with something named "doomlord"? I basically googled how to root, picked one, went at it. It ran fine, though I don't recall trying to do anything with the root. Most recently every time I powered it on, I was in the CWMR menu. I tried to install the latest kindle update from amazon (changed it to .zip, placed it in the folder, tried to install from cwmr menu), to get it back to stock. Didn't work, and the only way I was able to use my kindle was wiping everything and rebooting. I became frustrated and started to try anything I hadn't, I clicked fastboot mode. Now it's been stuck at the yellow triangle, does nothing when power is pressed, isn't recognized by my mac.
Many users had my similar situation but I truly am a newbie and went at this with no knowledge, though I do know some terms through the guide. It seems I'm stuck in a bootloop, and my kindle isn't truly broken for good.
What I want to know, in basic terms:
What do I need to download?
To send commands.. do I use terminal? Seems like I need to get 'fastboot' and 'adb'
I've also seen references to getting kindle fire utility- can I use this even though I used some random doomlord program and it's using CWMR?
How to 'flash' something?
Simple, step by step instructions would be SO APPRECIATED! I apologize for having a question everyone else has asked, but I feel so frustrated at this point.

Anybody?
So far, I have downloaded KFU, adb, fastboot, and FFF 1.2.
I've tried many commands to see if my kindle is in fastboot, it does not seem to be. All commands come back with "-bash: fastboot: command not found". I also am going into the directory of "android" where I put adb and fastboot. I think that is correct.
Not sure what to do with KFU, or FFF that I've downloaded.
Should I wait for the battery to drain? Though I don't think that will fix the problem at all.
Kindle still not being recognized by my mac.
At this point I will just pay somebody to help me successfully fix this or send it out. But if it's as easy as the solutions make it seem, I'd love to just do it myself. I think I'm just confused about what exact steps I need to make, whether that is flashing FFF or TWRP?

Whatever you do, don't let the battery drain.
Make sure you have your driver installed and configured correctly:
Code:
cat ~/.android/adb_usb.ini
The only acceptable output is "0x1949".
Next, try to take advantage of the temporary fastboot mode that comes with FireFireFire (yellow triangle).
Hold the power button to shut the device down and enter the following:
Code:
fastboot getvar product
Restart the KF when you see "waiting for device".
Give it a second to boot and you should get an output of "kindle" in the terminal. If you do, repeat the previous step with the following commands:
Code:
fastboot oem idme bootmode 5001
fastboot reboot
That should boot you into recovery again. (but you're not quite finished yet, we'll see if you can get this far first)
If that doesn't work, you should get a Linux LiveUSB (if you have a PC to use) or a VM (only Parallels will work with fastboot) to run Linux, and install and run Firekit. Depending on your Mac, it is possible, albeit very tricky, to get it to boot to a LiveUSB...but I wouldn't count on it. You might need to use the shorting trick to temporarily put the device in USBboot so Firekit can install a new bootloader (see Firekit thread).

soupmagnet said:
Whatever you do, don't let the battery drain.
Make sure you have your driver installed and configured correctly:
Code:
cat ~/.android/adb_usb.ini
The only acceptable output is "0x1949".
Next, try to take advantage of the temporary fastboot mode that comes with FireFireFire (yellow triangle).
Hold the power button to shut the device down and enter the following:
Code:
fastboot getvar product
Restart the KF when you see "waiting for device".
Give it a second to boot and you should get an output of "kindle" in the terminal. If you do, repeat the previous step with the following commands:
Code:
fastboot oem idme bootmode 5001
fastboot reboot
That should boot you into recovery again. (but you're not quite finished yet, we'll see if you can get this far first)
If that doesn't work, you should get a Linux LiveUSB (if you have a PC to use) or a VM (only Parallels will work with fastboot) to run Linux, and install and run Firekit. Depending on your Mac, it is possible, albeit very tricky, to get it to boot to a LiveUSB...but I wouldn't count on it. You might need to use the shorting trick to temporarily put the device in USBboot so Firekit can install a new bootloader (see Firekit thread).
Click to expand...
Click to collapse
Thanks so much for trying to help out. No dice, though. Your directions seem fairly simple and straightforward. I'll tell you what I did step by step-
First I connected KF to my mac, the yellow triangle appears. I go into the directory where adb is. I'm not sure what you meant by which drivers should be installed properly, but I put in the following into terminal:
Code:
cat ~/.android/adb_usb.ini
As a result I got:
Code:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x1949
This seems about right. I shut it down, and tried to input "fastboot getvar product". That is when I get the "-bash: fastboot: command not found". I feel really dumb right now. It really seems so simple but I'm just not getting it. I added a screenshot if that would give you any clue as to why even the first step isn't working. Thank you

2hellwu said:
Thanks so much for trying to help out. No dice, though. Your directions seem fairly simple and straightforward. I'll tell you what I did step by step-
First I connected KF to my mac, the yellow triangle appears. I go into the directory where adb is. I'm not sure what you meant by which drivers should be installed properly, but I put in the following into terminal:
Code:
cat ~/.android/adb_usb.ini
As a result I got:
Code:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x1949
This seems about right. I shut it down, and tried to input "fastboot getvar product". That is when I get the "-bash: fastboot: command not found". I feel really dumb right now. It really seems so simple but I'm just not getting it. I added a screenshot if that would give you any clue as to why even the first step isn't working. Thank you
Click to expand...
Click to collapse
Put the fastboot binary in your home folder and enter 'cd' (without quotes). Then run the commands.

soupmagnet said:
Put the fastboot binary in your home folder and enter 'cd' (without quotes). Then run the commands.
Click to expand...
Click to collapse
I am probably making this harder than it really is. Alright, both adb and fastboot now exist inside my home folder "/user/Lianna/"
Started with kindle on and plugged in, entered "cd" into terminal. Didn't do anything. Continued with "cat ~/.android/adb_usb.ini" got same response as before. Other commands were unrecognized/"not found".

2hellwu said:
I am probably making this harder than it really is. Alright, both adb and fastboot now exist inside my home folder "/user/Lianna/"
Started with kindle on and plugged in, entered "cd" into terminal. Didn't do anything. Continued with "cat ~/.android/adb_usb.ini" got same response as before. Other commands were unrecognized/"not found".
Click to expand...
Click to collapse
Ok try this:
Instead of typing the word "fastboot" into the terminal, drag fastboot into the terminal window and then type in the rest of the command.
[EDIT:] I almost forgot...you're not using fastboot from KFU are you? You need fastboot for Mac.

soupmagnet said:
Ok try this:
Instead of typing the word "fastboot" into the terminal, drag fastboot into the terminal window and then type in the rest of the command.
[EDIT:] I almost forgot...you're not using fastboot from KFU are you? You need fastboot for Mac.
Click to expand...
Click to collapse
Again, command not found. Does the first step indicate that my fastboot is indeed functional?

2hellwu said:
Again, command not found. Does the first step indicate that my fastboot is indeed functional?
Click to expand...
Click to collapse
Are you using the fastboot.exe from the KFU folder or a Mac specific fastboot binary?

soupmagnet said:
Are you using the fastboot.exe from the KFU folder or a Mac specific fastboot binary?
Click to expand...
Click to collapse
I used the two individual downloads for adb and fastboot from here: http://forum.xda-developers.com/showthread.php?t=1917237
I do have KFU in my downloads but I'm not using the fastboot.exe that comes with it. I am using the ones downloaded from above, which seems to be a "unix executable file". I'll show what happens when I open it.

2hellwu said:
I used the two individual downloads for adb and fastboot from here: http://forum.xda-developers.com/showthread.php?t=1917237
I do have KFU in my downloads but I'm not using the fastboot.exe that comes with it. I am using the ones downloaded from above, which seems to be a "unix executable file". I'll show what happens when I open it.
Click to expand...
Click to collapse
Ok let's simplify this. Put fastboot on your desktop and enter the following:
Code:
~/Desktop/fastboot getvar product

soupmagnet said:
Ok let's simplify this. Put fastboot on your desktop and enter the following:
Code:
~/Desktop/fastboot getvar product
Click to expand...
Click to collapse
That did get me the <waiting for device> product:kindle! I then restarted and tried to input
Code:
fastboot oem idme bootmode 5001
fastboot reboot
which again, got "-bash: fastboot: command not found"

2hellwu said:
That did get me the <waiting for device> product:kindle! I then restarted and tried to input
Code:
fastboot oem idme bootmode 5001
fastboot reboot
which again, got "-bash: fastboot: command not found"
Click to expand...
Click to collapse
LOL, pay attention now...
Code:
~/Desktop/fastboot oem idme bootmode 5001
~/Desktop/fastboot reboot
OR
Code:
cd ~/Desktop
fastboot oem idme bootmode 5001
fastboot reboot
...you follow?

soupmagnet said:
LOL, pay attention now...
Code:
~/Desktop/fastboot oem idme bootmode 5001
~/Desktop/fastboot reboot
OR
Code:
cd ~/Desktop
fastboot oem idme bootmode 5001
fastboot reboot
...you follow?
Click to expand...
Click to collapse
ah yes. so, that worked. now at:
Code:
< waiting for device >
~/Desktop/fastboot reboot
at this point KF is still off. power on or no?

Ok, KF is on and back in recovery mode. "CWM-based recovery v5.0.2.7" I have the menu of reboot, install zip from sdcard, etc

2hellwu said:
Ok, KF is on and back in recovery mode. "CWM-based recovery v5.0.2.7" I have the menu of reboot, install zip from sdcard, etc
Click to expand...
Click to collapse
Okay, first you need to find and download the ROM of your choice. You'll also need to download recovery flashable versions of TWRP and FFF, found HERE and HERE.
With those three things downloaded, boot into recovery and find the "Mount" or "Mount to USB" option. I haven't used CWM in quite a while so I couldn't tell you exactly how to get to it. Look around and you will find it. What that does is mounts your sdcard to USB as if it were a USB flash drive. Do that and transfer the three files you downloaded earlier to your sdcard.
With them on your sdcard, install both FFF and TWRP. CWM is way outdated and will not work anymore...Use TWRP instead. You can update to COTR later if you choose as it has a nearly identical look and feel as CWM. The new version of FFF will give you an option at the boot logo to change bootmodes on the fly (makes entering recovery much easier).
With FFF and TWRP installed reboot the device. As the device is booting you will see the Kindle Fire logo in blue instead of orange. When you see it, hold the power button until the boot options appear at the bottom of the screen. Select Recovery.
When TWRP boots up, select "Wipe" then wipe system and factory reset (this step is very important).
Afterwards, select Install, navigate to your sdcard and select the ROM you downloaded then swipe the arrow at the bottom. Select reboot system and you should be all set.
One more thing to note: If the device keeps booting into recovery after subsequent reboots, select "reset boot mode" in the FFF boot options.
Good luck.

soupmagnet said:
Okay, first you need to find and download the ROM of your choice. You'll also need to download recovery flashable versions of TWRP and FFF, found HERE and HERE.
With those three things downloaded, boot into recovery and find the "Mount" or "Mount to USB" option. I haven't used CWM in quite a while so I couldn't tell you exactly how to get to it. Look around and you will find it. What that does is mounts your sdcard to USB as if it were a USB flash drive. Do that and transfer the three files you downloaded earlier to your sdcard.
With them on your sdcard, install both FFF and TWRP. CWM is way outdated and will not work anymore...Use TWRP instead. You can update to COTR later if you choose as it has a nearly identical look and feel as CWM. The new version of FFF will give you an option at the boot logo to change bootmodes on the fly (makes entering recovery much easier).
With FFF and TWRP installed reboot the device. As the device is booting you will see the Kindle Fire logo in blue instead of orange. When you see it, hold the power button until the boot options appear at the bottom of the screen. Select Recovery.
When TWRP boots up, select "Wipe" then wipe system and factory reset (this step is very important).
Afterwards, select Install, navigate to your sdcard and select the ROM you downloaded then swipe the arrow at the bottom. Select reboot system and you should be all set.
One more thing to note: If the device keeps booting into recovery after subsequent reboots, select "reset boot mode" in the FFF boot options.
Good luck.
Click to expand...
Click to collapse
Before I start this- I should have clarified my main goal is to get my kindle back to stock. I don't have a need for anything extra, I really just use it to read books. From other guides, maybe it seems that my next steps should be to download the kindle update from amazon, and flash that?

In that case, download the update from Amazon, change the ".bin" to ".zip" and use that in place of your ROM. All other instructions will be the same...especially when it comes to wiping
"That's a special kind of stupid. The kind that makes me laugh"

soupmagnet said:
In that case, download the update from Amazon, change the ".bin" to ".zip" and use that in place of your ROM. All other instructions will be the same...especially when it comes to wiping
"That's a special kind of stupid. The kind that makes me laugh"
Click to expand...
Click to collapse
Ok I feel stupid, but how do I find where the sdcard folder is? Is it simply just dragging the update to "Kindle" or should I be putting it into a specific folder

2hellwu said:
Ok I feel stupid, but how do I find where the sdcard folder is? Is it simply just dragging the update to "Kindle" or should I be putting it into a specific folder
Click to expand...
Click to collapse
Yes, the mounted volume "Kindle" is your sdcard. Just drag and drop everything into that folder. Be sure to eject the volume from your computer (right-click on it and select eject) before you unmount it in TWRP.
"That's a special kind of stupid. The kind that makes me laugh."

[Q] Device Skips Fastboot Stage

Hello, I'm currently trying to install CyanogenMod on my Kindle Fire (otter2), but when I put "fastboot -i 0x1949 getvar product" into the command prompt, the Kindle boots into system instead of going into fastboot. fastboot also doesn't recognize my device, and thus waits for the device forever until I close the command prompt.
Any ideas?
EDIT: I have used this cable to successfully root and flash a rom on an HTC EVO 4G before if that means anything.

Aethereum said:
Hello, I'm currently trying to install CyanogenMod on my Kindle Fire (otter2), but when I put "fastboot -i 0x1949 getvar product" into the command prompt, the Kindle boots into system instead of going into fastboot. fastboot also doesn't recognize my device, and thus waits for the device forever until I close the command prompt.
Any ideas?
EDIT: I have used this cable to successfully root and flash a rom on an HTC EVO 4G before if that means anything.
Click to expand...
Click to collapse
You'll need to root or get a fastboot adapter to boot into fastboot.