Develop Bugs

[Q] Need Assistance, I brick my Galaxy Nexus

Hi, I am afraid I brick my Galaxy Nexus (Rooted)
Cause:
I think I wrongly delete some system files in Clockworkmod.
Symptoms:
1. When the mobile is turn on, only shows 'Google' logo and the 'Unlock' logo, no responds then.
2. Press Volume + and - key, I can successfully enter recovery mode.
3.Press Volume - key, I can successfully enter Download mode.
4. I do not have any Stock Rom file (or other Rom file) in the mobile memory.
Urgently need your expertise and help.
Many Thanks
(I am not an expert, so would you mind teach me step by step if you got the solution)
Thanks!!!!

So you cannot boot the phone at all past the Google splash screen? LTE or GSM?
Or does the phone boot fine, but you just can't get into ClockworkMod Recovery?

cbs2002 said:
Hi, I am afraid I brick my Galaxy Nexus (Rooted)
Cause:
I think I wrongly delete some system files in Clockworkmod.
Symptoms:
1. When the mobile is turn on, only shows 'Google' logo and the 'Unlock' logo, no responds then.
2. Press Volume + and - key, I can successfully enter recovery mode.
3.Press Volume - key, I can successfully enter Download mode.
4. I do not have any Stock Rom file (or other Rom file) in the mobile memory.
Urgently need your expertise and help.
Many Thanks
(I am not an expert, so would you mind teach me step by step if you got the solution)
Thanks!!!!
Click to expand...
Click to collapse
The key piece of information for your symptom is in this line:
1. When the mobile is turn on, only shows 'Google' logo and the 'Unlock' logo, no responds then.
The other lines do help provide background as to the other modes such as recovery and download working properly, which indicates the issue is not *serious*.
The symptom you state, where the device does not boot past the boot logo, usually means the device is not able to boot the kernel or boot past the kernel. The boot logo appears while the kernel is being loaded on the device. Generally, after the boot logo and kernel finish loading a boot animation appears which indicates the kernel has usually handed off to the Android OS to continue booting.
My approach would be to load a completely stock ROM in order to restore a working kernel and ROM to the device. I generally perform this step as a baseline to get everything back in working order.
In many instances the ROM is dependent on the kernel. Your situation requires at least a kernel to be loaded and in order to prevent any further issues, it would be best to load a ROM dependent on the kernel being loaded.
A simple way would be to grab the stock factory images from Google's site and load those back onto the device.
Another simple way would be to grab a stock ROM and flash the .zip through CWM in recovery mode.
Hope that helps!

Since you're rooted I'm going to assume you have ADB and the necessary drivers installed.
1.) Download a ROM. It doesn't have to be stock, you can choose any of the ROMs from the development section for your device. Most of the ROMs are packaged with a kernel already.
2.) Save this ROM file to the same folder where you have ADB installed.
3.) Boot your phone into CWM recovery and plug it into your computer.
4.) Use ADB to push the ROM zip file to your phone (/data/media). For example:
Code:
c:\gnex\>adb push rom.zip /data/media/rom.zip
5.) Use CWM to wipe data, cache, and davlik-cache
6.) Install zip from sdcard and flash the rom.zip.

RMarkwald said:
So you cannot boot the phone at all past the Google splash screen? LTE or GSM?
Or does the phone boot fine, but you just can't get into ClockworkMod Recovery?
Click to expand...
Click to collapse
1. I am using GSM
2. Whenever I turn on my mobile, the 'Google' and 'Unlock' logo appears and then freeze, with no more respond at all
* I definitely mess up some system files, but don't know how to restore it because my PC do not recognize my mobile.
Thanks

I am seeing more and more of these threads about "bricked" nexus's is this an issue with how new the phone is or people not following instructions properly as they are too eager to root their phones?
All else fails flash back to stock and count yourself lucky.

To silow,
Thanks for your advice, but fail
1. I put adb.exe, adbwinapi.dll and fastboot.exe (3 files) under my PC C drive (i.e. C
2. I also put a stock Rom (rename as rom.zip) under C drive (i.e. C
3. Boot phone into CWM recovery and plug it into computer.
4. Use cmd command and type c:\gnex\>adb push rom.zip /data/media/rom.zip
5. It fails , It say "Access Denied" (in Chinese, but I translate it into English here)
6. How do I use ADB (it is a ADB.exe file, When I double click it, it only flash up a few page very fast and nothing happen)
Please assist!

To Joeykrim,
I agree that
"Another simple way would be to grab a stock ROM and flash the .zip through CWM in recovery mode."
But how? (according to my symptoms)

The command I gave you was just an example. I didn't spell out the exact details because I thought that you would know how to do it considering you rooted the phone.
If you put the adb.exe and AdbWinApi.dll file in your C: drive, make sure you copy the ROM file to your C: drive too. In the follow example I'm going to use "ROM.zip" but use the name of the ROM file that you downloaded. Also I am assuming you are on Windows XP.
1.) Boot your phone into CWM recovery and then plug it in.
2.) Go to your Start Menu and choose Run. Then type in "cmd" without quotes and hit enter to open a command prompt.
3.) Enter:
Code:
cd c:\
4.) Enter the following to make sure ADB can see your phone:
Code:
adb devices
You should see something similiar to this to confirm ADB can see your device:
List of devices attached
019B756F0C018012 device
5.) Enter the following command to copy the ROM file to your phone. Remember to replace ROM.zip with whatever the name of the ROM file is:
Code:
adb push ROM.zip /data/media/ROM.zip
6.) Use CWM to wipe data, cache, and davlik-cache
7.) Install zip from sdcard and flash the rom.zip.

To Silow,
You have been very helpful, but I fail.
"You should see something similiar to this to confirm ADB can see your device:
List of devices attached"
There is NO device number shown after the phrase 'List of devices attached'
To recap:
a) Phone is already plugged in my PC, under the Clockworkmod Recovery 5.5.0.2
b) adb.exe and AdbWinApi.dll file are under C: drive directly
c) Also type cmd in 'Run', a black Dos window shown C:\windows\system32\cmd.exe
d) c:\>adb devices
List of devices attached
(But no device number show up, it cannot recognize my mobile)
Pls don't give up on me!
: )

you can't use adb from CWM, you need to enter the bootloader, then try adb or fastboot (edit: wrong!)

Sounds like your ADB USB drivers are not correctly installed. While the phone is under CWM, when you plug it in is your computer attempting to install drivers for a new device?
Download these bare ADB Interface drivers.ADB USB Drivers
Go into Device Manager on your computer and check the device list for any unknown devices or "?" devices. If you need to update those drivers by pointing them to the drivers you downloaded and extracted from that link above.
When the ADB Interface drivers are correctly installed you should see Android Phone listed under under your Device Manager when it's plugged in with CWM recovery loaded.
---------- Post added at 02:36 PM ---------- Previous post was at 02:35 PM ----------
cancerouspete said:
you can't use adb from CWM, you need to enter the bootloader, then try adb or fastboot
Click to expand...
Click to collapse
You CAN use ADB with CWM. That's one of the reasons why CWM is so awesome.

silow said:
You CAN use ADB with CWM. That's one of the reasons why CWM is so awesome.
Click to expand...
Click to collapse
edit: i did appear to have one missing driver, my mistake. it was listed in device manager as "unknown - full"
its funny cause i never had to use adb from cwm before, never noticed

cbs2002 said:
d) c:\>adb devices
List of devices attached
(But no device number show up, it cannot recognize my mobile)
Click to expand...
Click to collapse
This symptom generally occurs from not having loaded the drivers for the hardware. As with the majority of hardware devices when being connected to a Windows machine, the drivers need to be loaded. Sometimes these are automatically loaded and other times they have to be manual loaded.
As an alternative and for future reference, the android-sdk package contains general USB drives which usually work for Google Nexus devices.
Generally, as this providers a *cleaner* install, best practice as recommended by Google is to download the whole android-sdk .zip and then from the installer download/install the pieces needed, such as platform-tools (containing adb) and USB drivers as opposed to extracting out the adb.exe and .dll file and installing manually.
cancerouspete said:
you can't use adb from CWM, you need to enter the bootloader, then try adb or fastboot
Click to expand...
Click to collapse
silow said:
You CAN use ADB with CWM. That's one of the reasons why CWM is so awesome.
Click to expand...
Click to collapse
Agreed. To add greater clarification so there is no confusion: adb can't be used from the bootloader.
The /sbin/adbd daemon on the device is only loaded while in normal android boot mode or in recovery mode as called by the init.rc (or on some older devices, recovery.rc) file in the boot process.
Bootloader mode will only work with fastboot while it is in fastboot usb mode.
On some devices, the bootloader has a separate menu for fastboot and on other devices, the fastboot mode is directly entered when entering the bootloader.
Hope that helps clarify!

To silow (and all other helpers)
1. I fail
2. The ADB USB drivers in my PC should be fine as in Device Manager , I can see Android Phone with Android Composite ADB Interface. (No exclamation mark)
3. On the other hand, whenever I plug my mobile into PC, I can see "Unknown-Full"
4. In DOS, when I first type "adb devices" it shows
* daemon not running. starting it now on port 5037*
*daemon started successfully *
List of devices attached
(but NO device number shown!)
5. When I enter adb devices second time, it shows
List of devices attached (No device number shown)
Thank you so much , but it is Hong Kong time (my place) at 0511 am , I didn't sleep all night and I am very tired.
If you don't mind (especially big helper Silow), please give me email so that I capture screen picture and show you in detail (hope it may help)
my email is
[email protected]
I need to sleep now, I will check my email and see you guys or come back this Forum later (several hours later, as I really need some sleep right now)
Pls don't give up on me as this is an expensive mobile. I think the hardware is fine, just need to figure out a way to unbrick it.
Thanks, and see you!

What you need to do is right click on "Unknown-Full" and click on "Update Driver...". Then choose "Install from a list or specific location". Make sure "Search for the best driver in these locations." is checked and "Include this location in the search:" is check. Click on the Browse button and browse to where you extracted the driver files from the link I posted above. Click Next and this should install the correct drivers for you. Afterwards try "adb devices" again to see if ADB now reconizes your device.

To Silow,
Fail.
1. Already installed the drivers you gave me (and there is no 'Exclamation' Mark) in Device manager
2. Situation is the same , Cannot recognize my mobile (i.e. no Device No. after entering adb devices)
3. "List of devices attached" shown in DOS video but without any number.
No other method?
My mobile is really 'bricked' to death?

To Silow and all,
Something important
1. When choose 'install zip from sd card' under CWM, a list of old folder names remains
(e..g gameloft, DCIM, Pictures, etc). That means almost all old files, folders are STILL in my mobile!
2. I have already use the funcion 'Wipe data/factory reset', 'wipe cache partition', ' Wipe Dalvik Cache'
Perhaps my CWM has problem?

What happens when you update drivers for Unknown-Full?
Boot into fastboot and see if your computer recognizes the phone by checking device manager. The key here is to get your computer to see the phone either in fastboot or CWM.
Perhaps try another cable, USB port, or new computer.
The goal is to get Android Phone ADB Composite Interface to show up in device manager either in Fastboot or CWM. Without that done you cannot use Fastboot to flash nor ADB to push a zip file to the phone.
Sent from my Galaxy Nexus using XDA App

[HOWTO]Unlock, Root, and install CWR Galaxy Nexus with Ubuntu Linux or Linux Mint 12

warnning: any damage you do to your phone following these directions is your responsibility. Assume you warranty is void if your are rooted.
I used the information koush provided here and info birdman provided here and adopted it in Ubutnu Linux 11.10. I hit some bumps along the way using my Linux box so I decided to write this for those of us not using OS's made by the darkside This should also work with Ubuntu 12.04 LTS just fine.
All this should work with Linux Mint 12 also.
1- Set up Android SDK, adb, and fastboot in Ubuntu Linux using the links in my signature. I can't stress how useful and easy it is to set adb and fastboot in your "path" so you can easily use it from any prompt. The links explain it. Take your time with that and it will payoff for all your devices. Here is the guide I wrote http://forum.xda-developers.com/showpost.php?p=19446284&postcount=62
STOP NOW! EVERYTHING INCLUDING YOUR PERSONAL FILES, PICTURES, AND VIDEOS WILL BE ERASED WHEN YOU UNLOCK/ROOT THIS DEVICE. It does not have a physical SD card. Very annoying. Use Dropbox or Google+ to backup everything.
2- on your phone, go to settings/Developer Options and check the box for USB Debugging
3-connect your phone, fire up a terminal, and type:
Code:
adb devices
You should get the serial number of your device appear. If not, unplug, reboot phone, re-attach the phone to your computer and try again. If you still do not get your device's serial number, go back to step 1 and make sure everything is setup correctly.
4- Now download Clockwork Recovery from here
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.5.0.4-toro.img
(make sure it's the CDMA one (toro). The GSM one is called maguro and steps should be the same)
and su.zip from here
http://download.clockworkmod.com/test/su.zip
5-Turn the phone off, hold both Volume up and Volume Down and press the power button. You should come to a screen that has a big arrow and some writings at the bottom (fastboot). Last line should say Locked state.
6- Connect your phone to your computer, fire up a terminal and type:
Code:
fastboot devices
your phone and its serial number should appear just as it did using adb above. adb will not work here of course. If you don't see your device, go to step one. I guess you can download the fastboot for linux and cd to that directory and do it but I like to have it setup on my computer.
STOP NOW! EVERYTHING INCLUDING YOUR PERSONAL FILES, PICTURES, AND VIDEOS WILL BE ERASED WHEN YOU UNLOCK/ROOT THIS DEVICE. It does not have a physical SD card. Very annoying. Use Dropbox or Google+ to backup everything.
7- Now for the stuff that voids your warranty: Type
Code:
fastboot oem unlock
and enter. Look at your phone now, use the Volume up to choose YES and press the power button to accept. It should say that you are unlocked and fastboot is in good state.
9-use the volume up to change the value appearing in the arrow to recovery and press the power button to accept. You are taken to laying down android with a red triangle. This is the stock recovery. Now carefully press the volume up, volume down, and the power button to get to a menu. Choose wipe data and factory reset. 2 things: I had a hard time getting to the menu. Do it a few times and try pressing the power button JUST a fraction of a second earlier than the 2 volume buttons. Also wiping and resetting takes a few minutes, be patient.
10-you are now unlocked. Turn the phone off ( I pulled battery), go to fastboot screen by holding volume up, down and power button. Connect your phone to your computer and make sure it is recognized by typing:
Code:
fastboot devices
If it is, change directory to where you downloaded clockwork recovery. If you didn't change it, it should be the Download directory (remember it's case sensitive):
Code:
cd Downloads
11- Time to re-write your recovery:
Code:
fastboot flash recovery recovery-clockwork-5.5.0.4-toro.img
Please make sure you use common sense here when it comes to file names. If the file you downloaded has a different name or version, change it in the code above. I guess you can put the fastboot file in that location also to be used if you do not have it setup as in step 1. I'm not positive how and if that would work. Downloading and installing the wrong file is a mistake that may cause harm to your phone.
12- Use the vol up/down to point the big arrow toward recovery, push the power button to get to Cloclwork Recovery. Once you confirm you have CWR, reboot the phone normally and let Android OS create all the folders it needs. Once at start up screen, pull the battery to turn phone off, and then get to bootloader by holding vol up/down and power button in. Use the vol up/down to point the big arrow on sceen toward recovery. While in recovery, make sure your terminal prompt still shows the Downloads directory (or where the su and recovery files were downloaded to). Now type: (note the space between zip and /data)
Code:
adb push su.zip /data/media
this will put the su.zip file in the root of your virtual sd card.
You are still in recovery, reboot into recovery to refresh the file list by typing this
Code:
adb reboot recovery
Now go ahead and install su.zip through clockwork recovery's menus. Pretty self explanatory (choose zip from sd card). The su.zip should be now in the root of your virtual sd card.
That's all. You are now unlocked and rooted. Reboot. Make sure you install the paid versions of rom manager, titanium backup, and update superuser app.
13- Download Rom Manager and flash the recovery again (top choice). This will erase the install-recovery.sh file and keeps your CWR at each boot. You do not have to do step 14 if you do this. I will leave step 14 here just in case someone needs it.
14-When you are back in the fastboot screen. DO NOT reboot the phone here. There maybe a file that re-writes the recovery to stock if the phone is rebooted. Your phone may or may not have this file. of the two GN I have, one did and one did not at this step(may have been erased). The file is reovery.sh and is located in /system/etc/ . You need to either rename it or delete it.
While in fastboot and after you flashed CWR, use the Volume up and Down to change the arrow's value to recovery and press the power button. You should now see the familiar Clockwork recovery. In recovery, you can use adb (you can't in fastboot of course). You need to rename that file, use these steps in terminal: (If you see no file/folder found message, you know you do not have this file)
Code:
adb shell
Code:
mount -o rw,remount /system
Code:
mv /system/etc/install-recovery.sh /system/etc/install-recovery.bak
step 1 fires up adb, step 2 allows you to change permissions and read and write, and step 3 renames it. You can now unplug the phone.
Again, you can also get rid of this file by flashing the clcokwork recovery in Rom Manager or using the paid app root explorer to rename the file.
Once again referrence links:
http://rootzwiki.com/topic/12013-welcome-to-rootzwiki-editionstep-by-step-oem-unlock-and-root/
https://plus.google.com/103583939320326217147/posts/1Jsh9xPwnQP

thank you so much this is exactly what i was looking for. cant believe im the only one to comment on this. it is very detailed even some one new to Ubuntu could figure this out.

I've been using it too for a while but never posted so THANK YOU! Very easy to follow. Great work.

you're welcome. I find it ironic that a Linux based OS such as Android has so many HOWTOs for Windows but not enough for Linux. #powerofmonoply

I find I need to run fastboot commands with sudo or su into root before it will work. Same for you, or misconfig on my side?
Sent from my Galaxy Nexus using XDA

ual4720 said:
I find I need to run fastboot commands with sudo or su into root before it will work. Same for you, or misconfig on my side?
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
I'm not sure. How did you setup your adb and fastboot? I did not have to sudo for fastboot commands. What OS are you running?

Hey loveubuntu, I have a question.
I'm at Step 12, and I'm in recovery and when I run adb push su.zip /data/media, it isn't finding any devices. When I run adb devices, the device isn't listed.
Any advice?

AndroidSparty said:
Hey loveubuntu, I have a question.
I'm at Step 12, and I'm in recovery and when I run adb push su.zip /data/media, it isn't finding any devices. When I run adb devices, the device isn't listed.
Any advice?
Click to expand...
Click to collapse
were you able to see the device in the previous steps 3, 6 and 10 and now you don't?
Things that come to mind is:
1- Do you have the usb debugging checked?
2- unplug and replug the device and see if it works.
3- don't forget the samsung recovery file install-recovery.sh. If the phone is rebooted you may have re-written your recovery and have to start over. Then reboot the phone and go to rom manager and reflash the recovery (first option). This will take care of the install-recovery.sh file.

loveubuntu said:
were you able to see the device in the previous steps 3, 6 and 10 and now you don't?
Things that come to mind is:
1- Do you have the usb debugging checked?
2- unplug and replug the device and see if it works.
3- don't forget the samsung recovery file install-recovery.sh. If the phone is rebooted you may have re-written your recovery and have to start over. Then reboot the phone and go to rom manager and reflash the recovery (first option). This will take care of the install-recovery.sh file.
Click to expand...
Click to collapse
3, 6, & 9...check.
I rebooted my phone by pulling the battery and I still can't get adb to see the device. The install-recovery.sh? I don't remember reading anything about that.
In step 12 it says to let the phone reboot into the Android OS, but it's now back at factory reset, as that's what we did earlier in the instructions. As soon as it boots into the Android OS, adb lists the device.
At that point, since I'm in the AOS, I downloaded Astro File Manager and tried to put su.zip in the /cache folder, I think that's the folder that the clockwork recovery mod folder sees, and I don't have permission. I was hoping I could cheat and just drag & drop instead of pushing it. BUT...I did try the command adb push su.zip /media/play and I get permission denied. I'm guessing I don't have permission, even as sudo, to move the file to /data/media.

Okay I finally got it!
I didn't wait long enough for the Android OS to boot up. I finally was able to move the .zip file, but I couldn't find where /data/media was. So I let the OS boot up, removed the battery, went back into recovery, moved the zip file, and it was finally listed.

Ordered a Galaxy Nexus too, will definitely be using this guide. Windows guides are confusing.

Forceflow said:
Ordered a Galaxy Nexus too, will definitely be using this guide. Windows guides are confusing.
Click to expand...
Click to collapse
>Windows guides are confusing
>Windows guides
>Windows
Root of the issue
But agreed, this was a good supplement to follow for Ubuntu.
Sent from my Galaxy Nexus using xda app-developers app

Thank you for this guide. Some how I like the Linux method better than the Windows ones.
12- Use the vol up/down to point the big arrow toward recovery, push the power button to get to Cloclwork Recovery. Once you confirm you have CWR, reboot the phone normally and let Android OS create all the folders it needs. Once at start up screen, pull the battery to turn phone off, and then get to bootloader by holding vol up/down and power button in. Use the vol up/down to point the big arrow on sceen toward recovery. While in recovery, make sure your terminal prompt still shows the Downloads directory (or where the su and recovery files were downloaded to). Now type: (note the space between zip and /data)
Click to expand...
Click to collapse
This step is confusing. While in recovery should be replaced by "Hit Power button to enter ClockworkMod Recovery"
Otherwise people may mis-interpret by "Stay in fastboot and position the big arrow on top to Recovery Mode"
In my case (GNex GSM stock JB 4.11):
adb push su.zip /data/media
or
adb push su.zip /sdcard
did copy su.zip successfully but could not be listed by ClockworkMod Recovery menu when selecting "choose zip from sd card". I had to do this:
Code:
adb push su.zip /sdcard/Alarms
And, within the ClockWorkMod Recevery menu, select "choose zip from sd card"
Land on another screen where I could navigate to Alarms folder and see the su.zip there.
Now go ahead and install su.zip through clockwork recovery's menus. Pretty self explanatory (choose zip from sd card). The su.zip should be now in the root of your virtual sd card.
Click to expand...
Click to collapse
Sorry for being picky but personally, it is NOT self explanatory for me. I was expecting a menu item in CWM Recovery menu to say "Install su.zip". Actually you must navigate in the file system and select the su.zip yourself. Ok, may be that seems obvious now that I know what to do. But on the moment, I was worried I screwed up something because I needed to do some extra manipulations while you said that should be "self explanatory".
4- Now download Clockwork Recovery from here
Click to expand...
Click to collapse
You may want to up date the link, ClockWorkMod now has a Recovery program which is touch sensitive:
GSM: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.1.0-maguro.img
Sprint: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.1.0-toroplus.img
VRZ: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.1.0-toro.img

Step 12 finishes with
That's all. You are now unlocked and rooted. Reboot. Make sure you install the paid versions of rom manager, titanium backup, and update superuser app.
Click to expand...
Click to collapse
Therefore what is the need of doing #13 and 14?
Furthermore, Step 13 starts by
13- Download Rom Manager and flash the recovery again (top choice)
Click to expand...
Click to collapse
What is that top choice? Do you mean restart from the top at step #1? If you need to reflash again CWN, would it be simpler to restart from Step 10 instead of going back to the top?
And BTW, what is the reason to reflash the CWM Recovery again just after you have successfully flashed it at Step 12? Could that be #13 and #14 are some steps of an older guide which no longer apply now but you forgot to remove?
Sorry for the silly question but I am rather lost. After all that hardwork, when I attempt to Update SuperUser, it failed on the line "Gaining root access ..." What is the reason and how to fix that? FOUND ANSWER: the su.zip given in the post is Superuser 3.07 which is outdated, It is probably buggy. Replaced it by SuperSU 0.94 and it works perfect: http://download.chainfire.eu/204/SuperSU/
Thanks

worked like a charm.. if you have problem using fastboot, just cd to the folder with fastboot and run it like this:
Code:
sudo ./fastboot "command"
it will require your password and then work normally, seems like it need super user permissions.
Also for new user: to avoid writing a command or a folder name manually just push the TAB button, it will autocomplete the word if it's unique in that folder

[Q] Trouble with flashing new recovery

Hey everyone,
Alright so I have been trying to root my phone for the past 4 hours. I have unlocked it and flashed a custom recovery using adb. Or at least I thought I did. I tried flashing the clockworks recovery and when I would reboot it into the recovery, I would get an icon of a phone and an exclimation point. I assumed a bricked the phone and freaked out. A minute later the phone rebooted out of recovery and works fine afterwards. So I assume that the problem is the recovery. Something went wrong and I am not sure what.
Here are the steps I followed:
I was fine up until step four when I was trying to flash superuser.
No idea what to do from here.
HTC Unlocked = Bootloader is unlocked?
Not to take away from the OP, but i created a guide for a guy here at work and thought others might benefit from it.
Unlock Bootloader and Root
Unlocking your bootloader will wipe all data from your phone. Meaning you will loose everything make a backup.
Step 1: ADB Installation Instructions. NOTE:You must have ADB installed on your PC even if you use method 2b to unlock the bootloader. You will need adb to install recovery in Step 4.
1. Go to http://developer.android.com/sdk/index.html and download the sdk.
2. Follow installation instructions found here. Note: This is not a forum for this device DO NOT do anything but the adb installation on your system.
Step 2a: Download software from HTC to allow your bootloader to be unlocked.
1. Go to http://www.htcdev.com/
2. Login to the website. NOTE: Register for an account if you haven’t already. You must provide a valid email address.
3. Select “All Other Supported Models” from the drop down list and click “Begin Unlock Bootloader”
4. Follow online instructions.
1. SuperUser http://androidfiles.org/securekey.ph.../superuser.zip - Copy this file you phone. Special thanks to jmztaylor his link.
2. Recovery of your choice TWRP Recovery http://forum.xda-developers.com/show....php?t=2161702 or CWM Recovery http://forum.xda-developers.com/show....php?t=2161706. Put this file in the ADB Tools folder. NOTE: You must type the name of this file perfectly when using adb to flash it in step 4.
Step 4: Using ADB to install recovery
1. Open command prompt ( shift + right click, then choose “Open command window here”) and type “ADB devices” you should see you phone listed, if you do not start over at Step 1. NOTE: Phone must be plugged in and USB Debugging must be checked in settings.
2. Type “ADB flash recovery recovery.img” without the quotes. NOTE: the red is actually the title of the recovery file that you copied in step 3. If it’s different substitute your files name instead.
3. Once complete type “ABD reboot recovery”.
4. You should at this point backup your device
5. Once you create a backup, Choose install and navigate to the SuperUser file you put on your phone in Step 3.
6. If all goes well you are now rooted. Select reboot system to restart phone.
There is some very good information here but its spread out pretty thin. Guides IMHO are very usefull to fill the gap between devs/powerusers and the newbs.Most people that come here have a hard time with the things we take for granted such as adb commands, or adb its self (most will be setting it up for the first time). I tried my best to put it in a knowledge base that everyone can understand if for some reason you do not understand what i was trying to say please ask. I don't own this phone, just helped a friend root his, but if you need to get ahold of me pm me. I'll get back to you as soon as possible.
Any help? Just trying to get rid of the bloatware -_-

Did you copy superuser to your phone? And are you sure you are using the correct file location for adb in the command prompt? You must make sure you are and that all files you want to flash are also in the same folder as adb. Please respond if you have superuser on your phone and if you are positive you are using the correct adb folder location for the command prompt. I'm not the best at this however, I read up a lot on it just to root my phone. Took me 4 hours about as well, but that was before the recoverys came out. I suggest trying to flash twrp recovery, it's a bit buggy (for me) but I find it easier to use.
Sent from my HTC One VX using xda app-developers app

Code:
ADB flash recovery recovery.img
that is your problem to start with its not "ADB flash"
boot your phone into bootloader with usb connected to PC, Phone should read "fastboot"
Go the your adb directory in command prompt.
ex.
Code:
C:\PcUser\Master\Androidsdk\adb\
Make sure all drivers are installed, from CMD prompt window type "fastboot devices" to check your phone is showing.
if you see your device then you can type
fastboot flash recovery [drag your recovery image into cmd window] and hit enter and it should flash
once recovery is flashed you can either "fastboot Reboot" or on the phone use the Vol rockers to navigate to menu and hit bootloader then from there choose recovery

Hi,
I have the same issue about 2 days, I install TWRP Recovery and all it's ok, and flash in fastboot mode with adb like ilostchild tolds You.

It seems that I met the same problem.
My issue is the phone only boot into CMW mode, although I tried to restart it many times. When connect to usb cable, lappy did not recognize the phone so I can use adb command.
Please help me.

I can't make ADB recognize the device, I already installed the SDK the HTC Sync program but the device appears either as "My HTC" or "Android 1.0" and won't appear under "adb devices", any help? I have been googling for 3 days for a solution but I haven't found anything so far.

zeratos said:
I can't make ADB recognize the device, I already installed the SDK the HTC Sync program but the device appears either as "My HTC" or "Android 1.0" and won't appear under "adb devices", any help? I have been googling for 3 days for a solution but I haven't found anything so far.
Click to expand...
Click to collapse
Try using another computer!!! Install all neded drivers, searxh google and let windows automaticly install some. Connect via fastboot and it should say
Fastboot usb.
Also....dont search for adb devices, just enter commands starting with fastboot like... Fastboot install recovery cwmrecovery.img

spooky_ghosty said:
Try using another computer!!! Install all neded drivers, searxh google and let windows automaticly install some. Connect via fastboot and it should say
Fastboot usb.
Also....dont search for adb devices, just enter commands starting with fastboot like... Fastboot install recovery cwmrecovery.img
Click to expand...
Click to collapse
I already tried all those things you mentioned, I have been looking for 3 days for a solution for this problem on google without any luck, the device doesn't recognize any command either and I already set up a virtual machine and tried on that machine as well. u_u

Uninstall HTC sync then try adb devices be possitive you are using the correct location for adb. Usb debugging MUST be on as well. Copy paste the commands into the prompt to make sure you are entering them right. Be sure you have the downloaded files in the same folder you are using with adb.

Johann12911 said:
Uninstall HTC sync then try adb devices be possitive you are using the correct location for adb. Usb debugging MUST be on as well. Copy paste the commands into the prompt to make sure you are entering them right. Be sure you have the downloaded files in the same folder you are using with adb.
Click to expand...
Click to collapse
Already tried uninstalling HTC Sync, after that I deleted every trace of it. USB Debugging WAS ON before the phone crashed but I can't activate it now because the phone keeps looping between reboots.

Try to flash it via htc sync. Download the update and rewrite everything!
Sent from my HTC One VX using xda app-developers app

[HOWTO] Complete guide stock 4.3, root and recovery - Samsung Gnx GSM (Linux/Win 7)

Hi All,
I have spent this afternoon rooting stock 4.3 yakju and thought that I'd share the latest on how to go about doing this manually for the maguro GT-I9250. This is a complete guide which brings all the information you will need under the one thread which doesn't seem to have been done before except as separate guides and scattered information all over the internet.
NOTE: Unlocking and Rooting your device will void your warranty and can in some instances if not performed properly brick the phone. This process will also wipe your phone back to factory defaults so any personal files and applications will be lost. You should backup the device using the backup options in the recovery environment or by saving any personal files off the device via the USB cable, prior to unlocking your device. You follow this procedure at your own risk!!
With that disclaimer out the way there, We can begin.
NB: I ran all linux commands in this tutorial as root, I am not able to say if running as a standard user may cause issues, although one forum suggested to run as root or sudo up if you have a bootloop issue so I did this to avoid problems. This tutorial assumes that you have some experience with using basic Linux commands including but not limited to copying and moving files, changing directories, listing files, running scripts and executables using './' and using the console
So Firstly I am running Fedora 19 x64 with the latest kernel. It's a lot easier than trying to muck around with Windows 7 drivers and there are tutorials for installing these. To update on that tutorial you can use the official samsung drivers to install the adb and mtp drivers (may already be noted in the thread, but I might as well state it here also.) and the best place to get the official samsung drivers is by installing the Samsung Kies application.
You need to enable 'USB debugging' in order for ADB to work, you do this from 'settings --> developer options' if you can't see 'developer options' you may need to enable them, to do this, select 'settings --> about phone' and tap 'build number' until it says 'you are now a developer' which takes around 7 taps. In 'developer options', you may need to turn them on by clicking the 'on' button at the top. Once you have turned them on, select 'usb debugging' and this will then tell you that 'this may make your device less secure', agree/accept this, and continue. You can always turn it off later if you need to. Once you enable this, within linux you may get prompted when running adb to authorize (e.g. you are not authorized, check the device screen). You need to authorise from the phone, so allow the connection and select 'remember this computer' to save having to do it again.
Now for the bootloader driver it's a bit trickier to install. You need to reboot into the bootloader, by powering off the device and then powering back on again while holding the volume + and volume - keys at the same time. You will then probably get a failed driver install for 'Android 1.0'. At this point, you will need the universal Naked driver from this thread. Download and extract it to your 'Downloads' folder. Now go to device manager, right click on the 'Android 1.0' device and select 'update driver...' and then select 'browse my computer for driver software' and then select 'let me pick from a list of drivers'. Click 'have disk' and you will be able to install from the folder you extracted the 'Universal Naked Driver' into. You will now be able to use the fastboot command in Windows.
Ok. Now we have the windows users covered. In Linux, All I needed to do was download the android sdk adt tools. I'm using the 64 bit version, so I downloaded the 64 bit version from the adt bundle section here. Once I had downloaded and extracted these into a folder in my Downloads folder under my user profile, I copied the adb and fastboot files to a separate folder as these are the only things I needed in the bundle. you do this by typing
Code:
cp /home/<your_username>/Downloads/Androidadt/adb /home/<your_username>/Downloads/Nexusroot/
cp /home/<your_username>/Downloads/Androidadt/fastboot /home/<your_username>/Downloads/Nexusroot/
From here on you will want to be working from the 'Nexusroot' folder, so type
Code:
cd /home/<your_username>/Downloads/Nexusroot
.
From here, you need to obtain the recovery you wish you use, I chose to use the CWM v6.0.4.3 touch recovery which can be obtained from here. Once it's saved to your downloads folder you should copy it to your previously created 'Nexusroot' folder where we saved adb and fastboot.
The next item on the list is something I did because I was running the yakjuxw firmware and is the reason I did everything in Linux for this tutorial, as the firmware files are tarballed and opening the tar in 7zip shows 'unix filesystem' as the base folder. I installed the stock 4.3 firmware from google. I used the extracted files for the firmware as my 'Nexusroot' folder and copied fastboot and adb into this folder as well as the recovery image. I then ran ./flash-all.sh with the device in fastboot mode (you will need to have unlocked the bootloader prior to doing this, instructions are below in the next paragraph. The script basically just flashes the firmware with the fastboot command, if you want to flash the CWM recovery at the same time, you will need to rename the recovery file to the same name as the recovery image in the tarball and replace or rename the one that came with the tar file from google), If you have setup your environment in Windows 7 as described above, there is also a batch file that will do the same thing ensure the device is in fastboot before running the batch file/script or it will sit there and say 'waiting for device' and make sure the fastboot application is in the same folder as the script. Once the flash is complete your device will be running the stock 4.3 firmware. (edit: I have since extracted the entire image out of the tar with 7zip from Windows 7, you will be able to flash the base once you extract it all to a folder but you need to open the secondary container file in 7zip separately)
The next step is to flash the recovery. To do this, put the device into fastboot mode and unlock the bootloader using the command
Code:
fastboot oem unlock
select 'Yes' at the prompt, your device will now reboot twice and perform a factory reset which will wipe all data, at this point you may need to re-enable 'usb debugging' from your settings (see above for instructions), re-enter fastboot mode by typing
Code:
adb reboot bootloader
next type in
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.4.3-maguro.img
Your device will now install the touch recovery we downloaded earlier. Once done, type the command
Code:
fastboot reboot-bootloader
.
Now to root the device, download the SuperSU zip file from the link and copy it to your 'Nexusroot' folder. Now boot into your recovery environment by using your 'Volume -' key to select 'boot recovery' and allow the device to boot into the recovery environment. This will allow you to use the adb command. Change directory into your 'Nexusroot' folder if not already in it, and type
Code:
adb push UPDATE-SuperSU-v1.43.zip /sdcard/0
This will copy the zip file to the internal memory card. From the recovery environment on the phone, select 'install file from sdcard' and then 'choose zip from sd card'. Select '0' and then select the 'UPDATE-SuperSU-v1.43.zip' file and select 'yes - install...' and the zip file will install the SuperSU application and binaries. Your device is now rooted, however you will need to run the SuperSU app to update the binary again. We will discuss this further after the next step.
Now we should lock the bootloader again to prevent tampering with our recovery and other firmware images however if you wish to flash other ROMS you will want to leave this unlocked, or you will need to unlock it again next time you want to flash a rom. To lock the bootloader, with the phone in fastboot mode, you simply type
Code:
fastboot oem lock
and this will re-lock the bootloader. Note you will not be able to flash any radios, kernels, or other .img files while this is locked. Now reboot your phone back into Android.
Now that you know how to unlock your phone, it's rooted, and has a recovery environment installed, you need to activate your SuperUser install. To do this, open the SuperSU app, and when prompted to update, click 'continue'. You will at this point be asked how you want to install it, select 'CWM/TWRP Recovery' and your phone will reboot, you will see an update occur on the screen and SuperSU will now be correctly installed.
You can now begin experiencing the freedom to use whatever ROM you want, customise your device how you want, and even change which applications you want installed regardless of whether they are system apps or otherwise.
I hope this guide is helpful.
References:
http://forum.xda-developers.com/showthread.php?t=1379875
http://forum.xda-developers.com/showthread.php?t=1830108
http://forum.xda-developers.com/showthread.php?t=2117822
http://forum.xda-developers.com/showthread.php?t=2065470
http://www.ibtimes.com/how-root-galaxy-nexus-i9250-nexus-4-android-43-jelly-bean-official-firmware-tutorial-1362063
http://www.clockworkmod.com/rommanager
https://developer.android.com/sdk/index.html
http://www.ubuntu.com/phone/install
https://developers.google.com/android/nexus/images
Thanks:
@1wayjonny
@TECK
@samersh72
Without your guides I wouldn't have been able to do this.

[Q] Unfortunately, Google Keyboard Has Stopped

A few months ago I decided to try and root my Nexus 7 (2013) tablet. At this time I simply cannot remember what process I used but all I know is that everytime I try to power it on the system start screen comes on where it asks what country you're in and so forth. But I also get the following Pop Up Error message "Unfortunately, Google Keyboard Has Stopped" and an "OK" button. When I click on OK the error message simply pops back up in a never ending loop. It stops at the SELECT WI-FI screen and won't let me input the access code because of the Pop Up Error message.
Does anyone have any idea how to completely wipe the system and bring it back to stock or just to the point I can do "anything"?
Thank you in advance for your assistance!

Boot into fastboot by holding volume down and power while the tablet is off. Scroll through the options with volume keys. When you see the option recovery mode at the top of the screen, press power. This will boot you into recovery. From there, there will be several option. One of which should be a hard reset. navigate using the volume keys. You should be OK from here.
sent from my nex7

Thank you for your reply but unfortunately this doesn't work. It puts me right back to where I always end up and still get the Error Message stated above.

I've been working on this for a few hours now and nothing! It basically says I don't have a Keyboard installed after I do anything. If I Factory reset it I get the same Error Message about no keyboard.
Any ideas? PLEASE HELP!

That is really weird. Do you have a custom recovery installed? Custom ROM? Does the computer find it? because flashing a stock image may be the way to go from here.
sent from my nex7

mugzylol said:
That is really weird. Do you have a custom recovery installed? Custom ROM? Does the computer find it? because flashing a stock image may be the way to go from here.
sent from my nex7
Click to expand...
Click to collapse
Thank you for your reply. I greatly appreciate you taking the time. I am at wits end at this point and simply need it to run again. Can you talk me through loading whatever to get it back to new? I'll take anything at this point. Everything is backed up so I have nothing to lose. How can I load the original image? (non rooted)
Thank you!

I AM NOT RESPONSIBLE FOR ANYTHING IF IT GOES WRONG (it should not go wrong though)
First you will need an image. Search for a stock 2013 nexus 7 image. Than you will need to download google USB drivers :
http://developer.android.com/sdk/win-usb.html
Than install them by opening the device manager program which is installed by default on any windows computer. Plug your tablet in, right click it in device manager and press update driver software and browse for the driver you downloaded. Than install it.
Now that that is done download the android SDK.
http://developer.android.com/sdk/index.html
Extract just the SDK folder (the other parts are not needed) and enter it once extracted. Click on the platform tools folder, hold shift and right click. Click on
"open new command window here"
Now put your tablet into fastboot mode. Type
"fastboot devices" in the command window. If there is something that shows up this means that your tablet is recognized.
Now type "fastboot OEM unlock" in the command window. Select yes on your tablet with volume keys and click power on your tablet. Than it will run through the unlock bootloader practice. This will erase all content on the tablet. It may take a bit.
Once that is done, put your image in the tablets internal storage.
Now download the latest twrp for your device.
http://teamw.in/project/twrp2/193
Press download latest .img
Now, put your twrp image in the platform tools folder and name it something easy to type. Now, in the command window type:
Fastboot boot (name of your twrp here).IMG
This will boot into twrp. It will not install it.
Now, in twrp press install and browse for your image (must be a .zip file) and flash it. If all goes well than reboot your system. If there is a problem try another image.
You do not need to unlock bootloader or install drivers again. Just boot back in to twrp and flash another image (if it goes wrong)

Stuck
mugzylol said:
I AM NOT RESPONSIBLE FOR ANYTHING IF IT GOES WRONG (it should not go wrong though)
First you will need an image. Search for a stock 2013 nexus 7 image. Than you will need to download google USB drivers :
http://developer.android.com/sdk/win-usb.html
Than install them by opening the device manager program which is installed by default on any windows computer. Plug your tablet in, right click it in device manager and press update driver software and browse for the driver you downloaded. Than install it.
Now that that is done download the android SDK.
http://developer.android.com/sdk/index.html
Extract just the SDK folder (the other parts are not needed) and enter it once extracted. Click on the platform tools folder, hold shift and right click. Click on
"open new command window here"
Now put your tablet into fastboot mode. Type
"fastboot devices" in the command window. If there is something that shows up this means that your tablet is recognized.
Now type "fastboot OEM unlock" in the command window. Select yes on your tablet with volume keys and click power on your tablet. Than it will run through the unlock bootloader practice. This will erase all content on the tablet. It may take a bit.
Once that is done, put your image in the tablets internal storage.
Now download the latest twrp for your device.
http://teamw.in/project/twrp2/193
Press download latest .img
Now, put your twrp image in the platform tools folder and name it something easy to type. Now, in the command window type:
Fastboot boot (name of your twrp here).IMG
This will boot into twrp. It will not install it.
Now, in twrp press install and browse for your image (must be a .zip file) and flash it. If all goes well than reboot your system. If there is a problem try another image.
You do not need to unlock bootloader or install drivers again. Just boot back in to twrp and flash another image (if it goes wrong)
Click to expand...
Click to collapse
OK, a couple of things;
1. I'm using a MacBook Pro. Does this make any difference? (It says I don't have to download any drivers using a Mac but other than that is there any differences?)
2. I'm stuck at ..... Extract just the SDK folder (the other parts are not needed) and enter it once extracted. Click on the platform tools folder, hold shift and right click. Click on "open new command window here". Now put your tablet into fastboot mode. Type "fastboot devices" in the command window. If there is something that shows up this means that your tablet is recognized.
Everything I do doesn't work. When I hold down Shift and Right-Click on the Platform Tools Folder I do not see "open new command window here". Is this the "platform-tools folder under the SDK folder?

Do you have any windows computers because this will not work without one
sent from my nex7
---------- Post added at 08:27 AM ---------- Previous post was at 08:25 AM ----------
This is because Mac computers do not execute batch scripts and the fastboot commands are made to execute through a command prompt rather than a Linux terminal
sent from my nex7

I honestly made this way too complicated. Just run through setup without using the keyboard. Find an unprotected network (like McDonald's) that works and find a way to get your hands on an apk of any keyboard and install it. I'm not quite sure how you can get a download link to a keyboard with no account (yet) and no keyboard but there must be a way. Its a simple issue that causes so many problems. So in a nutshell, if you can find a way to install an apk of any keyboard, your good
sent from my nex7