Related
Review of the Invisible Gadget Guard | Screen Protector Shield for HTC Aria
Better then the one from at&t...
Size
...still just a little too big. The need to take a millimeter off the top. Also, the hole for the track button is a little to big... or I could have just stretched it while applying, but I'll get to that. Otherwise I am happy with the fit of the protector.
Application
Be afraid. If placing a near dripping wet "vinyl" sheet on your phone doesn't sound like a good idea, then this protector is not for you. This application method dose provide with a wide margin of error, if your like me and fail at applying screen protectors 50% of the time. The downside to this is as the protector will bend and wrinkle making smooth application difficult. Application tip: take the back off your aria and place the phone on a washcloth. That will allow the water that is forced out to run away from the phone and be caught by the washcloth.
Look
After application your display will appear off for a few min, but as the water evaporates, that will go away. The next day the display will be fairly clear, and not much worse then the hard plastic sticker screen protector. In my case the protector was not quite smooth, but that could be my 5 failed application attempts. While this is slightly annoying, is not a major issue.
Overall
This is not a bad screen protector, but has quirks that you may not like. It is better then the default at&t protector, but as new "hard" protectors come on the market, it will fall to you confidence and personal likes and dislikes as to if you choose this protector.
I tried this and totally ruined it. It looked like crap when it was on, with lots of gray areas, and the bubbles wouldn't all come out.
I tossed it in the trash and just chocked it up to more money wasted, because I read on the web that they will fight you tooth and nail if you try to get a refund.
When I did it I had that problem, but I pulled it off before it stuck, added more water and tried again. It really did take like 5 tries to more or less correctly apply the stupid thing.
Just installed mine. It seems a bit cloudy. I didn't think application was difficult, but the necessary use of water is unnerving. Hopefully it clears up as it dries.
Sent from my HTC Aria using XDA App
Just got mine in the mail and applied it today. A bit difficult but it's pretty good. Just got that cloudiness like others have mentioned. I'm guessing these are fine,tiny bubbles. I read in a few places the cloudiness will take sometime to dry up (about a week to cure completely). Apparently this material is tough stuff and if the cloudiness disappears, it'll all be worth it xD
Hope it clears up. Keep us posted. Still trying to decide which screen protector to buy.
Great review. You almost have to install these things in a clean room with robotic surgical devices to get them perfect.
I ended up going to bestbuy the other day and getting a zagg for an incredible. It was just a smidge bigger but came out damn near perfect. It is almost the exact size in width and the speaker is perfect, but the bottom is just about a 1/2 too long, so I had to trim and use a hole punch. Super disappointed in zag for not releasing the right cover. Jessica from zagg tells me that they have a cover the they are not releasing it yet and have no release date in sight. grrrrrr. I know the hd mini zagg is supposed be a good fit to, but bb did not stock that cover.
A few days on, and the cloudiness persists...anyone seeing any improvement?
Sent from my HTC Aria using XDA App
stickbo said:
Super disappointed in zag for not releasing the right cover. Jessica from zagg tells me that they have a cover the they are not releasing it yet and have no release date in sight. grrrrrr. I know the hd mini zagg is supposed be a good fit to, but bb did not stock that cover.
Click to expand...
Click to collapse
That's interesting, given that it's on their web site and I didn't see anything that said it was not yet available. Of course, they might tell you that AFTER they take your money. But I could just be cynical.
Post Script: I've got the Invisible Gadget Guard, and it's ok. What's perfectly applied is fantastic. But there are some places where it looks like there are small air bubbles underneath. Reapplying simply changed the pattern. They were originally annoying but, 2 days later, are decidedly less so. However, positioning is a pain.
stickbo said:
Jessica from zagg tells me that they have a cover the they are not releasing it yet and have no release date in sight. grrrrrr. I know the hd mini zagg is supposed be a good fit to, but bb did not stock that cover.
Click to expand...
Click to collapse
Apparently Jessica from Zagg is a dirty liar.
http://www.zagg.com/invisibleshield/htc-aria-cases-screen-protectors-covers-skins-shields.php
A quick check in here.
I purchased mine on Ebay from a seller called jusage. I paid a cool $7.67 for the Invisible Gadget Guard film PLUS car charger (generic 12v cigarette lighter adapter to micro-USB), and FREE shipping. A pretty good deal, in my view.
Unlike Zagg's, the kit includes neither a vial of "Apple sauce", nor a swath of chamois, not a squeegee. But I installed Zagg's films many time before and am quite comfortable with just a sauce of water (with one 1 tiny drop of dishsoap), a credit card, and a microfiber towel.
The fit is ideal. All cutouts are perfect. The film went on without any issues. After having dried overnight, the film is invisible now.
Same here I got the Gadget guard from ebay with the charger.. Only took 5 mins and let it dry good to go. And the charger is not a to much of a POS!!
cranked said:
A few days on, and the cloudiness persists...anyone seeing any improvement?
Click to expand...
Click to collapse
9 days since I first installed, and all the cloudiness is gone...in fact, I had forgotten about it all week, and actually thought of it this morning and had to look for edges to see if it was even on there! Patience is key, but I have to say after a week, you can't even tell I have it on there.
Fit = perfect, no bubbles, no cloudiness...
Definitely giving the Gadget Guard 5 stars...highly recommend.
cranked said:
9 days since I first installed, and all the cloudiness is gone...in fact, I had forgotten about it all week, and actually thought of it this morning and had to look for edges to see if it was even on there! Patience is key, but I have to say after a week, you can't even tell I have it on there.
Fit = perfect, no bubbles, no cloudiness...
Definitely giving the Gadget Guard 5 stars...highly recommend.
Click to expand...
Click to collapse
Ditto. I put mine on about a week ago. Application was easy. It is certainly not "invisible" as I can still tell it's there. The cloudiness is gone, it did take a while. There are no air bubbles like you would see with cheap protectors. It was easy to install, I ordered it from amazon and paid a few bucks more than most people, but I'm happy with it. Now, if only my amzer argyle case would ship...
I put the invisible gadget guard on about a week ago, I wouldn't say I'm having issues with cloudiness, as much as little pin sized dots all over the place, in clumps (which could be the so called "cloudiness"). its definitely not air bubbles as air bubbles would be bigger. Its causing a little pixel distortion on a plain white screen.
As I said, it has been almost a week and no real improvement.could anyone tell me if this is the same issue they are having or had? Or when these god forsaken dots will go away?!?
This was the first experience I've ever had with invisible gadget guard. I have however, applied three invisible shields (on other devices) with no such issue.
Thanks in advance for any input!
Sent from my HTC Liberty using XDA App (with swype, which is freaking AMAZING!) LOL
Overall I like it. Cloudiness disappeared but there's like two specks of dust under the guard. Just as long as it does the job, I'm not complaining.
Got the free car charger too. Hehe
I also purchased the Aria protector combo (screen + back + car charger) from jusage on eBay. Best-offered him $12 shipped which he promptly accepted. I ordered it the same day I ordered my phone from AT&T, hoping it would arrive at the same time or before the phone did. The phone arrive first, 2 days before the Gadget Guard.
Having read and viewed the installation instructions and video online (I was also sketchy about the water application), I decided to keep my phone untouched in the box until the protectors arrived. When they did, I washed my hands thoroughly before opening the box and removing the plastic from the phone. I washed my hands again before beginning the install of the protectors.
The fit of the film for the screen is dead-on. The fit for the back is okay, with cut-outs for the camera and htc logo. Make no mistake, due to the rubberized material, it's tricky to install the back film. I decided not to use water on the back (did on the screen though) because I wasn't sure the rubber wouldn't absorb the water or allow it to dry once the film was applied. I was meticulous with the application, using a credit card to slowly ease on the film from top to bottom before using a microfiber cloth (microfiber = no lint) to wrap the edges. When all was said and done, it looked pretty good. I had to peel back and re-install one edge of the screen to get rid of a pesky air bubble, but the back was pretty solid on my first try.
The next day, one of the top edges was peeling back. I pressed it back down and it re-adhered itself, but about 20 minutes later, it began peeling again...just enough to catch some lint. I tried 3 more times to clean it with water and reapply, but each time it would peel up. Finally I decided to just cut it off.
Today, two days later, the opposite corner started to peel up.
I emailed jusage through eBay and explained the situation to him. He replied the same day, apologizing for the trouble and saying he was sending me a replacement back film at no cost.
I'll update when I've received the replacement back film, but overall, I like this product. You can't beat the combo deal of a front and back protector film AND a car charger, all for $12 or less shipped to your door.
Well I actually like this phone being carried in my pocket, never liked a phone in my pocket before, so it only needs scratch protection.
I ordered a custom ZAGGskin yesterday after looking for cases and skins I finally went with ZAGG. If you register for their iPad giveaway they email you a discount coupon up to 50%, I got 30%. I didn't like any of their designs, so I used their customer designer and the copyright free image I found online, attached, as the template for the skin.
I also ordered the maximum protection ZAGGshield since I'm going overboard and wanted to put the protective strips on the side and the skin doesn't come with those.
All in all, maybe pricey for some, but about $32 with free shipping, and it could be done with any image of your choice as the back shield, and it would be less if I didn't order the seperate max protection invisibleshield.
I will update when it arrives with pictures from installation
It Arrived
It arrived yesterday, and I installed it last night and took some pictures.
Attached are downsized versions, follow link click here for hi-res versions.
It went on pretty smooth, the side pieces were a little hard to place even with the installation fluid they don't slide after placing like they do on the glass. You can see I got a fingerprint under it and its not as smooth around the curve by the mic but is hardly noticeable unless examining up close.
Fingerprints are greatly reduced, I have a firm feel for the phone in my hand and no longer worried about it sliding out of my hand or sliding on an unlevel surface.
The problem with the Zagg skin is if it starts to peel like my iPhone case did, it does not have the lifetime warranty like the screen protector. If I remember correctly the skin warranty was 30 or 90 days, and after that you are sol.
Hi all-
Waited until I got a chance to apply this thing before I wrote a review. This is a full-body skin like skinomi or invisible shield. It's a wet application, so if that scares you, don't read further. It was my first wet application, and I'll say I probably won't ever go back...
I used this only on the back; for the front I wanted a matte skin (to reduce glare and fingerprints). It comes in 5 pieces; 1 for the front and 4 for the back. Again, I only used the ones for the back. Here's my review:
1) This was the best screen protector experience I've ever had; also my first on a tablet and my first wet application, so that's saying something.
2) Wet application took about half an hour; most of that was spent holding down the edges as it dried. If you don't hold down the edges, the protector doesn't go around the edges. The wet application required only a bowl of soapy water, no solutions. I turned on a daily show and watched it while I worked.
3) During the application, I got several bubbles. This is one of the reasons why wet application is so much better: every bubble was worked out in just a few seconds. Also, unlike a dry application, the thing isn't covered in static, so you aren't attracting every bit of dust in the area to your skin. I think I ended up with one imperfection: a bit of cat hair. I'm pretty sure my cat planned that. The small bubbles from the soap were gone after an hour or two.
4) The other major advantage of wet application: you can readjust the protector once it's on. My protector is so perfectly aligned that you can't tell there's anything there if you didn't know that the original back cover is brushed aluminum.
5) Once applied and drying, I let the whole thing sit for a few hours before touching it again, to avoid accidentally shifting the skin. Instead of the brushed aluminum, now I have nice, grippy plastic on the back. It gets fingerprints but no more so than the unprotected back, and with this thing on I have no problem using a regular cloth to wipe it.
6) Like I said, I didn't put it on the front because I wanted a matte cover, but I'm considering it now... The matte cover is far better for fingerprints but it does affect the usability of the screen (less responsive, requires a heavier touch). Since it means throwing it away, I'll leave the matte skin on for a bit...
Overall, I'd say this was a great purchase. Oh, and I almost forgot: I got it for half off! Normal price is $36 for the full-body protector or $25 for the screen; this code will get you half off plus free shipping (code works for everything on the site):
http://www.clearprotector.com/catalogsearch/result/?q=xoom&x=0&y=0
and the code is: iwantultra
(just for clarity--I am not affiliated with this company in any way)
Give thanks if this helps you!
Thanks!
Just brought full body protectors for the Xoom and Galaxy Tab for only $33 with free shipping.
The only thing missing seems to be the spay to apply the cover, but this is a minor issue.
EDIT: Also thanks to OP for the excellent guide. I'd just like to add that I normally leave the device powered off for 12 hrs after using any liquid method, to prevent any possibility of water damage.
You can apply the cover in the evening and leave it to dry through the night.
Bigmille said:
Just brought full body protectors for the Xoom and Galaxy Tab for only $33 with free shipping.
The only thing missing seems to be the spay to apply the cover, but this is a minor issue.
EDIT: Also thanks to OP for the excellent guide. I'd just like to add that I normally leave the device powered off for 12 hrs after using any liquid method, to prevent any possibility of water damage.
You can apply the cover in the evening and leave it to dry through the night.
Click to expand...
Click to collapse
Should have added this to the original post:
http://www.youtube.com/watch?v=n-hN4PHDfsg
Use lots of water, make sure the whole surface is covered, but then let it drip until theres not much left. I didn't use enough water to have any worries of water damage to my xoom (almost nothing comes out from the edges), but you need to get complete coverage or you could get a bubble that wouldn't come out.
Do exactly like the video; make sure your workspace is open and clean! (like, really clean!) Wipe it down first, then lay out a clean dish towel. Use the dish towel to wipe the little bit of water from the edges. You can use the dish towel to hold the plastic to the curved edges too.
ZAGG sells a similar kit that includes a solution in a spray bottle. As well, you can also order the kit with a graphic pattern on it either from the shop or your own custom work, thereby giving you protection with a good grippy surface AND cool graphics to customize your tablet. Ill post a picture of mine later.
Kokanee483 said:
ZAGG sells a similar kit that includes a solution in a spray bottle. As well, you can also order the kit with a graphic pattern on it either from the shop or your own custom work, thereby giving you protection with a good grippy surface AND cool graphics to customize your tablet. Ill post a picture of mine later.
Click to expand...
Click to collapse
That's great. I had no idea there were other options. Maybe you should write a review...
BestSkinsEver Samsung Galaxy S2 T989 Total Body Skin Review
I know our phone is more than a year old now, I am writing this review as there doesn't appear to be any particular review of the skin for our phone (in this case, it's better late than not at all). The review is based after two weeks of usage so that I can provide as accurate information possible.
*to view a larger image just click on the thumbnail*
Delivery and Packaging |10/10| :
The skin was ordered from the BestSkinsEver website so it was shipped directly from their main facilities. Living outside of the US I had to choose the 'First Class Mail' shipping method which was $3.00CDN. The delivery arrived in my mailbox exactly 7 days after ordering just as advertised, no complaint. The skin came packaged in a white #10 sized envelope, nothing fancy, this is beneficial to the shipping cost and is eco-friendly (the skin is what matters the most). There were no damages (folds/tears) on the envelope which was great. Included inside the envelope is a packing slip with your shipping information, order info, etc... and most importantly the skin which is protected on some sort of vellum paper (protects adhesive side).
Pricing and support |10/10| :
Depending on the time you see this review, the price and availability of the skin may be different. I purchased the skin during a 30% off sale, however, even without the discount the total body skin is affordable (less than $10) compared to similar skins from other companies.
As for the BestSkinsEver support, they have provided outstanding customer service from my experience with them. I had an issue where I found a small gash right in the center on the adhesive side of the screen protector during installation. I had contacted the company with the issue and provided them with several pictures and they were able to quickly send me a replacement screen protector free of charge.
Application |8/10| :
It is a wet application, so I had to prepare a homemade solution of liquid soap and water inside an empty Monster ScreenClean spray bottle. I prefer the idea of making the solution myself rather than having the company charge an extra cost for their own solution. Instructions for the application is given on the website and after following the video applying the skin was a breeze. The overall procedure took me more than half an hour (could be quicker) but I was trying to be a perfectionist. Since it is a wet install, it made aligning the skin easy as long as you sprayed enough of the solution (don't be afraid to be generous adding solution, just make sure you wipe off any excess that come to the edges). Also, it is important to keep your hands moist with the solution at all times during application so that there is no friction between your fingers and the skin.
The only difficulty that I came across during the application was getting the side skins installed, particularly around the corners. Patience is key, I held the corners down in place with my fingers and I used the heat of my breath to help the adhesive stick. After doing so the side skins were flush with one another perfectly around the sides, top and bottom of the phone as shown in the provided pictures. I would also like to mention, the skin for the back of the phone leaves some sort of texture in certain areas due to the grid pattern on the back cover (this is metioned on the website). However, after some trial and error I was able to remove most of the texture and even with a bit of it left it looks pretty cool, almost like a camouflage pattern.
After applying the skins I used a gift card double-wrapped with a microfiber cloth to push away air bubbles and wipe off any leftover solution. At first it will still look like some of the solution is still under the skin no matter how much you try to squeegee it out, but after using the phone for 24-48 hours the solution disappeared/evaporated and the skin protector looked flawless (as if it weren't there at all).
Screen Protector Quality |9/10| :
First off, the screen protector is cut perfectly to fit edge to edge of the glass which is quite amazing. The cut-outs for the camera and earpiece are placed appropriately and are close to accurate. The cut-out for the earpiece however could have been cut closer/smaller so that the top part would adhere properly and not move as easily (not that great of an issue).
The feel/texture of the screen protector after the application felt somewhat rubbery, but after more than a weeks use with the phone any friction by the screen protector began to smooth out (even after wiping any oil marks off the screen). Speaking of oil marks, the protector does not easily attract fingerprints unless your fingers are extremely oily and when there are fingerprints, it's hardly noticeable at all (almost as if there is an oleophobic coating). Any fingerprints on the protector literally comes off with a single wipe of a cloth. When it comes to scratches the screen protector is more than decent enough to prevent everyday scratches from loose change and keys, but definitely isn't a guarantee. Any minor scratches disappear due to the self-healing properties of the skin.
The best attribute with this screen protector is that it retains the clarity of the screen while it's on. There are no issues with any brightness loss, rainbow affect, color tint, grainy look... nothing! The screen protector is crystal clear... the only flaw is that at certain angles where harsh light is hitting the screen there is a noticeable orange peel effect/texture, although it doesn't really degrade the clarity and is not visible with the screen on.
Body Skin Quality |8/10| :
The body skin for the phone is perfect for anyone who does not want the housing of the phone to get scratched. The cut-outs for the headphone jack, usb, buttons, camera and microphones are cut extremely precise. The back cover is cut edge to edge, it's only the speaker cut-out that is ever so slightly off center. Also, the side protectors are cut perfectly to not leave any space between... downside, there is about a millimeter of vulnerable space between the side and the back due to the curvature of the sides. The feeling/texture of the body skin has the same slickness as the screen protector, although it provides a better grip compared to the raw feel of the phone, particularly the sides. As for protection goes, the body skin will definitely hold up against any scratches from everyday items as it has the same self-healing properties as the screen protector. The body skin is thin enough to maintain the sleekness of the phone. The trade off is if you are looking for any drop protection, the skin is not thick enough to absorb any impact.
Overall |9/10| :
The BestSkinsEver total body skin in my opinion is the "best skin" in respect to it's notable quality over it's affordable price. The skin is easy to apply and for everyday use, it's more than enough protection while keeping the phone's sleek form factor. The skin in particular is made extremely well with all the precision cut-outs and the screen protector definitely keeps the quality of the screen. Overall, it works great for what it's designed to do and I definitely recommend this for anyone looking for an affordable option to protect their Samsung GS2 T989.
There's a possibility that I get complaints such as the review being rather long for some people... if it's a lot to read, just read the "overall" or just don't read it all. Since it's a review, I believe it's better to give any necessary information.
Additionally, I bought myself a Diztronic case and a Sandisk 64 GB Micro SD card. I can write a review for them as well if anyone would like me to and if anyone knows any other products you would recommend I get, let me know. Thanks!
thanks man im thinking of ordering tomorrow or ill just use this with my d3o case
Great review, FineTalent! You might not be an All-Star Dev yet but you're definitely an All-Star reviewer lol.
Great review, this product is exactly what I've been looking for. Thanks a bunch!
Posted from my Galaxy S II X.
FineTalent said:
There's a possibility that I get complaints such as the review being rather long for some people... if it's a lot to read, just read the "overall" or just don't read it all. Since it's a review, I believe it's better to give any necessary information.
Additionally, I bought myself a Diztronic case and a Sandisk 64 GB Micro SD card. I can write a review for them as well if anyone would like me to and if anyone knows any other products you would recommend I get, let me know. Thanks!
Click to expand...
Click to collapse
nice review!! I got my phone yesterday and I'm planning on buying the same case as you. do you mind making a review for the other stufff you mentioned??
I'm so glad you posted this review. I actually purchased this skin a few weeks ago. I had planned on putting a review up myself, but I got lazy .
My initial attempt to do this ended in a blaze of anger, resulting in my crumbling up all the pieces, and tossing them in the trash. The next morning, I saw one of the side pieces on the floor, and thought I'd give it another shot. Unfortunately, all the pieces were kinda stuck together. I figured out that the soap I was using to apply the films was a moisturizing soap, with kind of a waxy feel...pretty foolish on my part. Anyway, I carefully pulled the films apart (whilst watching a movie, because it was a looooong process), and used a different soap for the mixture. End result: glossy white protection film all around. Great product, great price.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I have to have it perfect, but i always end up with dust/dirt bubbles, or it`s not aligned correctly.
I would pay to mine fitted perfect, why does somebody not set up a business fitting them.
Phone shop`s should offer the service for a small fee.
I usually buy a cheap pack or 6-10 as i throw a lot away, or still end up not having one fitted.
John.
Tinderbox (UK) said:
I have to have it perfect, but i always end up with dust/dirt bubbles, or it`s not aligned correctly.
I would pay to mine fitted perfect, why does somebody not set up a business fitting them.
Phone shop`s should offer the service for a small fee.
I usually buy a cheap pack or 6-10 as i throw a lot away, or still end up not having one fitted.
John.
Click to expand...
Click to collapse
For dry applies, look up the hinge method on Youtube, it makes applying screen protectors a breeze, and gets things perfect every time the first time. As far as dust goes, I recommend shining a LED flashlight around the screen, and using a piece of tape to spot remove every last bit of dust just prior to peeling the screen protector's 1st side up.
For wet applies, I find that I get better results by not using any soap, and just using water by itself. Less chance of it appearing cloudy or hazy after it dries. The key is to use liberal amounts of water to keep the protector sliding.
Every time I install one I screw it up so I finally gave up and just started picking them up at the AT&T store and let them do it. Ordered a mime ghost glass a while back and was heading down to the AT&T store to see if they would install it, but stopped at Radio Shack on the way there and those guys were more than willing to install it for me also. The guy said the mime is much easier to install because its more solid and not like those flimsy cheap ones you buy elsewhere. Seems most places that sell them aint got no problem installing them if they aint all tied up with other stuff.
Thats the problem. the cheap ones do not stick as well as the ones from good companies such as Spigen, MediaDevil, martin fields
glass protectors are the thing now, MIME feather glass from the USA is the best
Tinderbox (UK) said:
I have to have it perfect, but i always end up with dust/dirt bubbles, or it`s not aligned correctly.
I would pay to mine fitted perfect, why does somebody not set up a business fitting them.
Phone shop`s should offer the service for a small fee.
I usually buy a cheap pack or 6-10 as i throw a lot away, or still end up not having one fitted.
John.
Click to expand...
Click to collapse
I would use the hinge method for placement, as far as the dust/dirt try the shower method. Run the shower for five minutes with the door closed on hot (allows steam to form). Turn off shower and allow the steam to settle (2-3) minutes, this pulls the dust and dander out of the air. Then apply the screen protector to the handset.DO NOT leave the handset in the bathroom while the rooms fills with steam or when it is settling. I did not believe this method would work but I have used it on my Rezound, Droid X, Nexus 7 tablet and my HTC One with dust/hair free installs.
I used to be clumsy at it, but now I fit mine flawlessly. I have done it with 3 phones and 2 tablets and all of them were bubble free. My rule, keep the device under a light so you can see the dust particles or anything else clearly. Wipe it with micro fiber (or use alcohol wipes if the surface is smudgy). Use a scotch tape to remove the dust particles, small strokes, even in the areas which look clean. It takes 2 minutes to cover the whole device. Align the screen protector across the edges and work your way down, making sure the sides align and are in straight line. You will get bubbles which you can then remove using a credit card by wiping them towards the edges. Works for me everytime.
I work at a cellphone store and whenever someone buys a screen protector we install them for free glass or plastic:laugh:
what I find is the easiest method of applying a film screen protector and worked for me for 2 years whilst working in a vodafone store is the following:
1) ensure the screen is clean of dust, a good cloth in a relatively clean environment does the job, if not do it near a boiling kettle.
2) before peeling off the first layer line the screen protector up along the top of the handset, where you would like it begin. (for the htc one, it would be just below the top speaker grill),
3) peel back the first layer only slightly, line and up press down adhesive side with the top of the handset, easiest done with the top of the handset facing away from you. (benefit of this is, you've pulled the whole thing off and it's less likely to catch dust if only a small part of the protector is visible to wilderness.
4) with the top of the protector adhered to your screen, swivel the phone around so the top is closest to you without letting the protector move from it's position,
5) from here, it is a simple task of taking a piece of cardboard or hard paper and gently push forward from the top, whilst slowing peeling back the bottom plastic until you're at the bottom.
6) you may have some small bubbles right on the bottom edge of your protector, just use your thumb or the paper to gently squeeze them out.
Works for me 90% of the time. Also depends somewhat on the quality of the protector. But I would recommend a Glas.Tr or MIME type protector.
I love that dust remover that came with the mime. I covered the whole screen, ripped it off and put the glass one on in less than a second.
I bought mine from mobilefun.com. Don't remember exactly which, but it was one of the "premium" ones (not cheapest). From a 5-pack I got it perfect on the 4th try! Be patient and read the insructions carefully (which I didn't before the 3rd try) hehe ...
OK, i read no instructions apart from which tab to pull of first on the protector, i cleaned the screen with the included cloth, no steamy room or anything, it took me five attempt's to get the protector in the right place and there were bubbles galore, but i managed to get them all out, no dust underneath that i can see so i wasted no screen protectors i still have two left.
John.
Three things are recommended, dust removing sticker, microfiber cloth and a room with heated vapor such as a bathroom, after you have showered(dont take device in during shower).
I got some cheap matte ones from eBay... They are truly awsome and fit the whole screen(you must be pro master on fittin screen protectors)
http://www.ebay.com/itm/35084675949...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
My secret for fitting perfectly is to hold your screen down after wipin all the dust while getting the protector ready itself... Once I put it on without any dust under ir, I press it very hard and move it in direction where I need if not correctly positioned... When its just sticked on, you can still move it slighty - thats all it takes to get those 0,1mm right