Related
I called Tmo (USA) and told them that I was travelling to Canada and wanted my SIM unlock code for my Dash. I gave them my IMEI and they emailed me a 8 digit code to unlock the phone. Only problem is that I need the "foreign" SIM to initiate the code entry on the phone according to their instructions (see below). I am wondering if there is another way to do this without the "foreign" SIM because I want to unlock it prior to travelling in fear that I dont want to break/brick my Dash while travelling.
Here is their email to me:
T-Mobile Sim Unlock Request
Sim Unlock Reference: XXXXXXX
IMEI: XXXXXXXXXXXXXXXX
Unlock Code: XXXXXXXX
Thank you for taking the time to contact T-Mobile. Below you will see the Instructions for unlocking your HTC device.
1. Insert the foreign SIM card
2. Power on the device and the display should read "Please input unlock code"
3. Enter the unlock code and the device should display "Phone is unlocked."
4. Allow the phone to scan the network (or manually click on the antenna icon to do this)
It is very important that the instructions and SIM unlock code are entered correctly as listed. If you receive an error message while performing the instructions do not make any further attempts to unlock the handset. Please be aware that if an excessive amount of incorrect attempts are made, the phone will be permanently locked. You will need to verify the IMEI by pressing *#06# and contact Customer Care for support.
I saw this file (DASHv2Unlock.zip) from here. Anyone know if the code I got from Tmo will work with the DASH2Unlock program?
Thanks!
well im in states and i called tmo and told them i was going to london just to get a unlock code and all i did was put my moms cingular sim in and boom unlocked just like that foreign card just means a diffrent sim like one of cingulars ask a friend for theres if they have cingular
^^^What he said
neggie said:
well im in states and i called tmo and told them i was going to london just to get a unlock code and all i did was put my moms cingular sim in and boom unlocked just like that foreign card just means a diffrent sim like one of cingulars ask a friend for theres if they have cingular
Click to expand...
Click to collapse
Thanks, I try to go to a local Cingular retail store. MOst of my friends use Nextel or Sprint or Tmobile around here. Cingular has terrible coverage in Hawaii.
Sim
You shouldn't need a "foreign sim," but rather any sim that's not on your carrier, then the phone should give you the unlock code prompt. I always keep an old cingular sim around for this purpose.
^ Any SIM other than your carrier's SIM is a foreign one.
~Cheers~
Actually, to unlock the phones you do not even need a foreign sim. You can use your T-Mobile SIM. They just tell you that so you can make sure it's working
shiggins9 said:
You shouldn't need a "foreign sim," but rather any sim that's not on your carrier
Click to expand...
Click to collapse
Thanks for the laugh
Yep, fairly easy. As soon a TMo emailed me my unlock code, I borrowed a coworker's cingular sim card and took all of 30 seconds total.
PaisanNYC said:
Yep, fairly easy. As soon a TMo emailed me my unlock code, I borrowed a coworker's cingular sim card and took all of 30 seconds total.
Click to expand...
Click to collapse
Could have taken 15 seconds if you didn't swap SIMs
merwin said:
Could have taken 15 seconds if you didn't swap SIMs
Click to expand...
Click to collapse
How would you enter a code otherwise?When the Cingular sim was in it, it automatically prompted me for the unlock code.
Good question
im also curios as i dont have a foreign sim handy jsut been waiting for one to come my way to unlock.
When TMo unlocks??
When you have TMo unlock the phone for you is the SIM unlocked and the CID unlocked also? Or do I have to use the website everyone has mentioned to get both things unlocked?
randynchicago said:
When you have TMo unlock the phone for you is the SIM unlocked and the CID unlocked also? Or do I have to use the website everyone has mentioned to get both things unlocked?
Click to expand...
Click to collapse
Just a SIM unlock
unlocked now
Well finaly borrowed a cingular sim and got unlocked.
everything went well.
What now ?
Hop on a plane to London, make some calls...
yggdrasil said:
Well finaly borrowed a cingular sim and got unlocked.
everything went well.
What now ?
Click to expand...
Click to collapse
foriegn sim doesnt prompt to enter unlock code
Hello,
I just got my unlock code from TMO today. I put in a ATT sim but it does not prompt me to enter the code just says "Searching..." but never finds the signal.
Any help is appreciated.
currently running WM6.5 ROM V6.30EN By Lovebabyjing Build 23017[12/09/09]
tried to flash back to tmo official but kept getting errors at 3% of upgrade. "error 244 incorrect model id???"
Sorry for the Noobness of this question, but I tried searching and did not find a solution. I have obtained an unlock code from T-mobile and do not have a SIM card from another provider with me at the moment. Is there another way that I can get the Wing to ask me for the SIM Unlock code w/o having to enter another provider's SIM? I'm sure there is, but I need help finding it. Thanks ahead of time for anyone willing to help!
Entering Unlock SIM Code
djtrunxness said:
Sorry for the Noobness of this question, but I tried searching and did not find a solution. I have obtained an unlock code from T-mobile and do not have a SIM card from another provider with me at the moment. Is there another way that I can get the Wing to ask me for the SIM Unlock code w/o having to enter another provider's SIM? I'm sure there is, but I need help finding it. Thanks ahead of time for anyone willing to help!
Click to expand...
Click to collapse
NO!
Find someone that is on AT&T and borrow their SIM card for a few minutes! It's not that hard - I've done it twice in the last month (in the opposite direction)
I have a SaskTel Samsung Galaxy S3 (SGH-I747M, baseband version I747MVLLE8) that is locked, and I want to unlock it. But when I insert a foreign SIM (from AT&T) I get no prompt for an unlock code. Instead it just says "No SIM card. Emergency calls only." I've contacted several of the online unlock code suppliers and they say without this prompt I can't unlock the phone. I've also tried to enter variations of the *7465625* code, but they do nothing at all. SaskTel says they don't provide unlock code. This despite the fact that I purchased the phone outright, and have no contract with them. Am I totally hooped, or is there some way I can get this phone unlocked?
ddice said:
I have a SaskTel Samsung Galaxy S3 (SGH-I747M, baseband version I747MVLLE8) that is locked, and I want to unlock it. But when I insert a foreign SIM (from AT&T) I get no prompt for an unlock code. Instead it just says "No SIM card. Emergency calls only." I've contacted several of the online unlock code suppliers and they say without this prompt I can't unlock the phone. I've also tried to enter variations of the *7465625* code, but they do nothing at all. SaskTel says they don't provide unlock code. This despite the fact that I purchased the phone outright, and have no contract with them. Am I totally hooped, or is there some way I can get this phone unlocked?
Click to expand...
Click to collapse
try another SIM, maybe the one you're using is borked.
Try this
#7465625*638*# (Insert Network Lock Keycode)
Sent from my SGH-I747M using xda app-developers app
cue_32 said:
Try this
#7465625*638*# (Insert Network Lock Keycode)
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
I've already tried that, the phone doesn't respond to this keystroke sequence.
dLo GSR said:
try another SIM, maybe the one you're using is borked.
Click to expand...
Click to collapse
Possible, but I doubt it, since it works just fine in another phone. In any case I don't have another one to try.
Misread
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
lamsik said:
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
Click to expand...
Click to collapse
That and probably every variation of it I can think of! I am wondering though, is this code internal only to the phone, or does it go to the cellular network? When I do type it, it does nothing, though if I send it I get an "Invalid USSD" message returned from the network.
lamsik said:
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
Click to expand...
Click to collapse
this code doesn't work on the LTE variants of the SGS3. most of the multi-stage codes (####*###) don't work, you just end up with an error.
Correct as stated. Additionally, if you have a foreign micro sim, and you are not on a stock ROM, the unlock screen prompt will not show. I was running AOKP, and could not get the prompt to show, so I flashed back to stock, unlocked phone, then flashed back to AOKP, bc TW sucks!
Sent from my SAMSUNG-SGH-I747 using xda premium
Gerbowski said:
Correct as stated. Additionally, if you have a foreign micro sim, and you are not on a stock ROM, the unlock screen prompt will not show. I was running AOKP, and could not get the prompt to show, so I flashed back to stock, unlocked phone, then flashed back to AOKP, bc TW sucks!
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
This is what I was starting to suspect. Can you refer me to a good, really clear step by step procedure to do this? I've never done this with a phone, and since I live in a small town, I doubt I can find anyone to help me here. So a step by step would be nice. Thanks.
ddice said:
This is what I was starting to suspect. Can you refer me to a good, really clear step by step procedure to do this? I've never done this with a phone, and since I live in a small town, I doubt I can find anyone to help me here. So a step by step would be nice. Thanks.
Click to expand...
Click to collapse
are you on a stock ROM?
i have a i747M and unlocked it with the at&t micro sim, so i know it works,
did u cut ur at&t sim down to size ? maybe u did it wrong and it wont recognize, or ur sim slot is ****ed up ....
ur best bet right now is to try another micro sim
Ok, I've now got my phone rooted. Can someone suggest how I can get the ROM set so that it will allow me to enter the unlock code when I insert a foreign SIM.
There's a 3rd potential method that hasn't been mentioned on here that we see working for most Samsung handsets. In fact, for some Samsung handsets (usually older ones) it is the only unlocking method that will work.
It is:
1. Turn on the phone with a non accepted or accepted SIM card inserted
2. Type #0111*CODE# replacing CODE with your network unlock code
However, if your service provider lock is active, then you'll need to use the code #0133*CODE# instead.
All unlocking methods (once you have the unlock code) are available here: http://www.mobileunlocked.co.uk/samsung-instructions.asp
Hope that helps.
Did you manage to unlock?
I'm facing the exact same issue. My S3 doesn't show the network unlock prompt when I insert a foreign SIM. Mine is locked to AT&T. It's also SGH-I747 model
You could try and unlock your phone as per this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
Then try the SIM card after the phone is unlocked.
Oh, I believe this only works on Stock ROMS.
Tybalt said:
You could try and unlock your phone as per this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
Then try the SIM card after the phone is unlocked.
Oh, I believe this only works on Stock ROMS.
Click to expand...
Click to collapse
Follow the link Tybalt quoted, you will unlock your phone and the sim won't ask for an unlock code because well, it's unlocked.... Follow the instructions, you need to be on JB 4.11 for this to work, some have had success on custom roms but not many....you don't need to root to do this and make sure when you see the success code you have 40 at the end not 30... i did this a couple times... 30 I think basically means you have locked it again ... and in the instructions when it says wait 30 or 60 seconds... you really do have to wait.. don't be impatient....it's a huge thread with many many successes.....
Samsung Galaxy S3
I have the same issue but I have a sgh-i747 Samsung galaxy S3 i brought it to koodo and was told it was a compatible phone with the company when unlocked. The problem/question i have is When i insert my new simcard the screen will not display any prompt to input a unlock code. It just says emergency calls only or unregistered sim. I inserted my sim card into another s3 same model, software versions, different provider, and the phone asked for the unlock code right when powered on. So i tried and flashed a new firmware but its doing the same thing.
I called koodo and they gave me instructions to create a new apn of Koodo SP it did not make my phone prompt me for an unlock code.
When i send an email to any website about unlocking my phone they advice me not to purchase there product if my phones not prompting me for a unlock code that will it more then likely not work.
I've seen methods online of using these to input an unlock code "#0111*UNLOCKCODE#" or "#7465625*638*UNLOCKCODE#" but when i tell the unlock website this information this still tell me not to purchase there product and i mean many numerous websites. I do not want to buy an unlock code only to try to input it with these methods and have it not work. Which i highly dought it would because the normal 7465625 command doesnt work either.
I also tried this factory unlock and it did nothing
PLEASE HELP!?!?
mobileunlocked said:
There's a 3rd potential method that hasn't been mentioned on here that we see working for most Samsung handsets. In fact, for some Samsung handsets (usually older ones) it is the only unlocking method that will work.
It is:
1. Turn on the phone with a non accepted or accepted SIM card inserted
2. Type #0111*CODE# replacing CODE with your network unlock code[/URL]
Hope that helps.
Click to expand...
Click to collapse
Thank you so much for this!
Whenever I typed any variation of the #7465625 code I would get the "emergency calls only" message. #0111*CODE# did the trick!
The provider didn't even know this, the best they could come up with after numerous calls to their hotline is that the phone was broken and/or that the SIM card was badly inserted, thus I should mail them the phone to the other side of the country for unlocking. Would they even have known how to do it over there?
My grandma says thanks!
Is there a way to unlock the phone when running a custom ROM such as CM10? Is it permanent whether or not I flash other or upgraded ROMs in the future?
I am asking all of this knowing my unlock code. I got it from my carrier but when I use the secret GSIII codes along with my unlock code I get an error. I assume its because I am on CM10. Is there a way to do this without putting another SIM in my phone.
I am asking this because I want to verify my unlock before traveling and getting a foreign SIM inserted.
Thank you.
I've had this issue myself. You must unlock on stock rom or else it won't work.
sweetsimplistic said:
I've had this issue myself. You must unlock on stock rom or else it won't work.
Click to expand...
Click to collapse
Even if you're on the stock ROM, the code that you type in to get to the unlock prompt won't work. The only way to do it is to insert another carrier's SIM &turn on the phone. It will then prompt you for the unlock code. Type it in and voila.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Oops the previous poster added info I forgot to add! Stock rom + another carrier's SIM card and you're good to go! The other carrier's SIM doesn't even have to be active or if you don't have another SIM, you can easily pick up a prepaid SIM for about $5-$10.
sweetsimplistic said:
Oops the previous poster added info I forgot to add! Stock rom + another carrier's SIM card and you're good to go! The other carrier's SIM doesn't even have to be active or if you don't have another SIM, you can easily pick up a prepaid SIM for about $5-$10.
Click to expand...
Click to collapse
Thanks for adding that.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Thanks for the info.
So after unlock flashing ROMs will still have it unlocked right?
Also for my reference, for those in the US, will a T-mobile micro SIM prepaid card that I can buy can be used to verify my unlock on my AT&T Samsung GS3?
Thanks.
magistrateee said:
Thanks for the info.
So after unlock flashing ROMs will still have it unlocked right?
Also for my reference, for those in the US, will a T-mobile micro SIM prepaid card that I can buy can be used to verify my unlock on my AT&T Samsung GS3?
Thanks.
Click to expand...
Click to collapse
Yeah. Any SIM will verify it. And yes, when it's unlocked, it's unlocked. No matter what ROM you flash, it will be unlocked.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
third time is a charm! After two tries it finally worked for me. this time I made sure that I called at a time that it would be hard for me to get a US rep(2:00 AM EST).
This time I got a mexican rep, she was so nice and fast. no questions asked, just the IMEI and 3 minutes later she gave me the code. Also, I am on CM10.0.0 stable and it worked by just putting a alien SIM card and entering the code.
Unlocking ROM'd Captivate?!
So, with your note below you are saying that even with another ROM you can unlock a phone, say the Captivate(i897), by just getting a friendly non-US based AT&T help desk person!?
DJBBOX said:
third time is a charm! After two tries it finally worked for me. this time I made sure that I called at a time that it would be hard for me to get a US rep(2:00 AM EST).
This time I got a mexican rep, she was so nice and fast. no questions asked, just the IMEI and 3 minutes later she gave me the code. Also, I am on CM10.0.0 stable and it worked by just putting a alien SIM card and entering the code.
Click to expand...
Click to collapse
Hi can someone please help me.. So i am trying to network unlock my phone.. I have already obtained the unlock code. But i have no idea how to input the code that i have without a non-tmobile sim... My phone is t-mobile.. Is there any way i can input the unlock code without a non-tmobile sim card??
If someone could please let me kno hw to it would be great. Thanks in advance
I don't think so. When you put in the other SIM card it triggers a prompt for the code. Easiest thing to do is borrow a friend's sim, or you can buy sims on eBay for $.99. Or just keep the code until you have the other SIM card for the other network you plan to use it on. If your not using it on another network the unlocking is kinda pointless.
Sent from my GT-N7105 using Tapatalk 2
Here you go bro
I still have the email they sent me from almost a Year ago...lol
kraziex17 said:
Hi can someone please help me.. So i am trying to network unlock my phone.. I have already obtained the unlock code. But i have no idea how to input the code that i have without a non-tmobile sim... My phone is t-mobile.. Is there any way i can input the unlock code without a non-tmobile sim card??
If someone could please let me kno hw to it would be great. Thanks in advance
Click to expand...
Click to collapse
What's your T-mobile model?
There is no other way to unlock without a non-T-mobile SIM as far as i know.You may follow the below instructions:
1. Switch ON your mobile with a Not ACCEPTED SIM Card.
2. If your mobile asks for a PIN code, then enter your SIM card PIN and press OK.
3. T-Mobile Affinity will ask to enter an "unlock code".
4. Your mobile is now unlocked.
I also followed these steps to unlock my mobile. I got the unlock code from TheUnlockArena.com here they provided permanent unlock code.
guider said:
1) There is no other way to unlock without a non-T-mobile SIM as far as i know.
2) I got the unlock code from TheUnlockArena.com here they provided permanent unlock code.
Click to expand...
Click to collapse
1. Then you didn't read here:
http://forum.xda-developers.com/showthread.php?t=2176721
2. Why pay for something that you can have for free? (read the above #1)