Reboot problem on AOSP!(fixed) - LG Optimus G Pro

Guys need help.
My device is E988 and I love AOSP ROMs. I have had reboot issue from past month, before that everything used to be fine. To my bad luck now every AOSP ROM I install reboots randomly. And specially sometimes when I text phone freezes and reboots causing text msg to fail and also sometimes on incoming calls. I have been using cm11 official builds n tried every other AOSP ROMs. Same problem. But everything is fine on stock and stock based ROMs. Flashed .kdz and then rooted and installed AOSP based rom and again kernel panics. Is this just me or any other e988 users experiencing this issue? I have flashed all kinds on e988 modems too. If anyone interested to look into this issue I'll be glad to provide logcat.
Edit: fixed by installing slimkat and flashing E988 modem thrice!

I too am having this issue. Everything I install is in reboot loop.

Fixed
Fixed.. See op for details.

Hey bro, can you provide the correct verion of e988 modem?
i need the modem but unfortunately i can't find this on the internet

Related

Wifi issue on AOSP Roms

Hi guys,
I have had the s2,s3,galaxy nexus,original note and i am used to flashing and modifying,but i have a serious issue with the note 2.
The problem is whenever i flash AOSP rom(cm,aokp,pa) my wifi would not connect.It shows the name of the network and when i click conenct nothing happens.Flashing back TW rom fixes it,wifi works like a charm. I've done full wipes but it doesn't seem to resolve the issue.I tried different kernels,but that doesn't help either.
So I am stuck at TW roms and i hate that.Anyone has any ideas?
You can try options 2 and 3 from this thread.
Thanks for your reply,but i tried this and it didn't solve my problem.
Anyone?
spookhc said:
Anyone?
Click to expand...
Click to collapse
I Have the same problem...
Not sure that it will help you but I read something yesterday about this issue.
The solution was to NOT restore your Google profile during first boot so you should full wipe and try again.
Primokorn said:
Not sure that it will help you but I read something yesterday about this issue.
The solution was to NOT restore your Google profile during first boot so you should full wipe and try again.
Click to expand...
Click to collapse
This actually has nothing to do with the problem.
After a few days I finally found the cause ,and therefore,a decision to the problem.
It is the bootloader from 4.3 sammy leaks.It seems that this new leaks(probably the reason being KNOX) cause malfunction of wifi in aosp roms.What i did was ODIN flash stock MG1 from sammobile .This brought back stock recovery so i had to flash TWRP again and it solved the issue for me.
Before that i had tried changing roms,kernels,recovery,modems and nothing worked so I am pretty sure it is the new 4.3 leaks bootloader.
Some people will say that it can\t be the issue because they are using 4.3 sammy and do not experience the same problem on aosp roms,but i think thats because they flash it through CMW ,which doesn't change bootloader,while flashing through ODIN does.
With my Note2 this is not the solution. I've tried everything. What you said, move file "pit" ..... but nothing. I can not connect wifi. The connection does not appear region Spain, and have opted to choose europe, but neither. I do not know to do. CM 10.1 also does not work WIFI. In Stock ROM or Custom ROM works fine fine, but in ROM CM 10.1, 10.2, AOKP don't work.
spookhc said:
This actually has nothing to do with the problem.
After a few days I finally found the cause ,and therefore,a decision to the problem.
It is the bootloader from 4.3 sammy leaks.It seems that this new leaks(probably the reason being KNOX) cause malfunction of wifi in aosp roms.What i did was ODIN flash stock MG1 from sammobile .This brought back stock recovery so i had to flash TWRP again and it solved the issue for me.
Before that i had tried changing roms,kernels,recovery,modems and nothing worked so I am pretty sure it is the new 4.3 leaks bootloader.
Some people will say that it can\t be the issue because they are using 4.3 sammy and do not experience the same problem on aosp roms,but i think thats because they flash it through CMW ,which doesn't change bootloader,while flashing through ODIN does.
Click to expand...
Click to collapse

MMS works a few times, then stops with each ROM I try

Every time I start a new ROM, my MMS starts working again. This lasts until I send and receive maybe 10 MMS's, at which point MMS becomes non-functional again. Sometimes reflashing the ROM gets me another 10 MMS's, and sometimes it doesn't. What could my problem be? I've most recently experienced this with Dirty Unicorn paired with the NH7 baseband, and am now having the issue with SlimROM 4.4.2 build 5 paired with NH7.
Thanks!
Flash NK2 stock firmware, run phone for a day, you should be able to MMS your ass off.
Firmware will fix or correct files and apk's that get borked by custom roms. Remember roms are not complete firmware.
All that flashing may have borked your system ui, flashing stock after a factory reset will/should fix it.
Give a day or so, make sure everything works, then choose your custom rom , hopefully a stable one.
Pp.

Problem with CM-Based Roms.

Hi everyone,
i have a problem with my rooted LG G3 855. After flashing Cloudy 2.5 i want go back to a cm based rom. After installing any CM based rom, my phone messed up. The "Uprade in Progress" message appears. After that my phone reboots and the initializing progess begin again. Anybody else faces this problem? Any solutions? I tried different roms. Nothing works. Only backups of older roms seems to be stable. Dont know what happened. I always did a clean install.

Need help on Flashing a recovery for sprint L520

Someone showed me the thread with the 12.1 cm rom and the .img for the recovery is it okay if I use flashify to put the recovery on my phone instead of using odin after rooting? Or does someone have a .tar recovery for the L520 in a drop box somewhere? also do I need to update my firmware before flashing a rom? I think I'm on firmware na7 on 4.2.2
it's fine, trust me use flashify. Odin doesn't flash .img files. No, you don't need to update your firmware, it's going to be flashed over anyways.
Seemed to work fine. That cm 12.1 rom still working okay for you?
There's a few little annoyances but it's working okay otherwise. I get an exclamation point by my bars sometimes and have to reset the apn to fix it. GPS has some issues so it's become more a roadmap than actual guidance and I can't send mms but that's not really an issue as I have unlimited data and can just facebook messenger as a workaround. I hope that these issues get fixed but I understand that alot of 5.1 roms have issues with the exclamation point thing and even some unrooted 5.1 phones have the problem. It would be nice to see a fix for these issues but I don't see anyone making any more roms for this phone and the guy that made this rom seems to have landed a job with cyanogenmod and is too busy to update this rom. What a shame but at least I have 5.1 now.
Hmm I suppose I'll stay at 4.2.2 till I feel like flashing 12.1 thanks for all the info. You don't have any overheating issues or random restarts right? Also how does the GPS not work well?
No overheating or random restarts. All things considered its a pretty smooth rom if just a little incomplete. I only tried using the GPS once and it came up with my location and the route for where I needed to go but when i was driving along the GLS was not updating my location. It may have been just a one time thing, idk, I havent needed to use GPS since.
Cool do you know a way to go back to stock if I don't like the cm 12.1 rom?

auto answer call issue

i have strange issue, i'm not sure it's from last update, when i back to pe2 stock with odin and then install twrp, after i installed many custom roms i had a common issue that never happen before, with every custom rom when someone call me mu N4 don't ring and answer automaticly, and those roms works before without this problem, any idea???
i tried with official bases and custom roms, same issue
installing cm12.1, cm13, aosp always same bug
please, if someone know how to fix that i'll be gratefull

Categories

Resources