So I bought the expensive official Google folio case without doing my research. It doesn't auto wake/sleep which is pretty annoying, I take it there is just a magnet somewhere that does this. Anyone heard of anyone modifying it or putting a magnet in? Anyone know where the magnet is located so I can experiment?
are you sure you have the Folio case? because the Folio case is the 1 that has the wake/sleep function, which on mine works fine...
junkinmytrunk426 said:
are you sure you have the Folio case? because the Folio case is the 1 that has the wake/sleep function, which on mine works fine...
Click to expand...
Click to collapse
I'm sorry, I don't have the folio case. I have the regular case that looks like a book. Its really not worth the hefty price tag.
Fixed the title.
Just get some magnets and experiment, the sensor is on the bottom near the usb port. You could glue a few magnets on the outside of the case. Most folio's have 3 to 4 magnets...Get some nice chrome magnets at harbor freight tools or micheals or joann etc. Just avoid the neodymium, I hear those are too strong. theres also the plastic strip type magnets, but I haven't tested those. But it should be as easy as walking over to your frig and trying it out...
Bradlees said:
So I bought the expensive official Google folio case without doing my research. It doesn't auto wake/sleep which is pretty annoying, I take it there is just a magnet somewhere that does this. Anyone heard of anyone modifying it or putting a magnet in? Anyone know where the magnet is located so I can experiment?
Click to expand...
Click to collapse
When held in portrait orientation, the sensor is on the left bezel near the bottom. I added a magnet to one of my Verso cases and it works perfectly.
what brand case? or is this official nexus 7 case?
Agreed - not worth $49.99
I bought one at Best Buy. It is Google Branded and stamped and says Nexus 7 2013 on the box.
I'm returning mine because once you fold it to watch the screen, it no longer lays flat and there is no way to close it. Plus, you can get what appear to be much better ones on Amazon for under $20. :fingers-crossed:
Related
for about $16.. pretty nice
http://www.ctcstore.com/Acase-Samsung-GALAXY-Tab-10.1-High/M/B0057I6ZVI.htm
radiohead14 said:
for about $16.. pretty nice
http://www.ctcstore.com/Acase-Samsung-GALAXY-Tab-10.1-High/M/B0057I6ZVI.htm
Click to expand...
Click to collapse
Looks nice, but could we fold the cover flap fully to the back, in case we want to hold the tab in book reading mode
I just ordered one of those from amazon.
Bad thing is that for me, shipping was even more expensive (15$) than the cover itself (14$)...
I think you can fold the cover flap fully to the back, in case you want to hold the tab in book reading mode. Take a look at a video on youtube about this case, but ipad version. Search for "Review: Acase Slim Leather Folio Case with Stand for iPad 2".
doesn't look like it. there's no crease on the front cover like the ipad case i have.
i bought one earlier and it should be here next week. now i'll have a matching set for my ipad, gt7 and gt10.1.
madsquabbles said:
doesn't look like it. there's no crease on the front cover like the ipad case i have.
i bought one earlier and it should be here next week. now i'll have a matching set for my ipad, gt7 and gt10.1.
Click to expand...
Click to collapse
Aw man, didn't see that. If only it is a mistake with the pictures and the cover we receive is OK... I think that crease helps you type on the best position. Well, you know better that you have the I pad version.
you can rest the bottom on the "latch" and put in a slightly upraised position. i just find it a little too bouncy when doing that while typing.
I have the same case for my 7" Galaxy Tab and am very happy with it. The quality is that of a much more expensive case. If I had not already bought another case I would be picking one of these up.
Unless I am seeing it wrong in the photos the problem with this case is that you have to constantly detach it from the BOTTOM HALF of the TAB to use it in a tilted position. This is how that $90 Zenus brand carbon fiber case I bought and returned worked. It was a real PITA plus it will eventually wear the paint off the tab.
i prefer that than the extra thickness (like belkin folio case). i haven't had any chipping or scratching on either of my other tablet's yet, but i did bend all those tabs a bit after getting them to make it easier to pull out. i even loosened the cover latches a bit too.
Im looking for a flip case where you can detach the 'flip' part of the case. At the moment im using the Samsung Flip case (instead of a screen protector) within a cheap TPU case that has a kickstand. Im finding the camera tricky to use with the flip part of the case getting in the way, so it would be good if i could take it off when needed, then reattach it. :good:
I've done a DIY mod on the flip case - cut off the 'flip' part and stuck it to the TPU with velcro - as you could imagine its far from perfect...
I've been searching for a while but nothing so far.....
Well here's something the case makers seriously have to do.
Imagine something as convenient as the Microsoft tablet detachable keyboard?! But a detachable flip.
I would buy one without thinking twice.
Sent from my GT-N7000 using Tapatalk 2
Check this out...
http://www.ebay.com/itm/New-OEM-Pro...Accessories&hash=item3cc828af01#ht_3059wt_724
Jrob2k said:
Check this out...
http://www.ebay.com/itm/New-OEM-Pro...Accessories&hash=item3cc828af01#ht_3059wt_724
Click to expand...
Click to collapse
that's a normal flip case......he's looking for a flip case where the cover is detachable.
Sent From My Paranoid Powered Note Baby!
http://www.ebay.com/itm/Samsung-Gal...034417?pt=PDA_Accessories&hash=item3f159520b1
Hope this helps.
s4sixty said:
http://www.ebay.com/itm/Samsung-Gal...034417?pt=PDA_Accessories&hash=item3f159520b1
Hope this helps.
Click to expand...
Click to collapse
Looks like a practical solution.
However it has a magnetic clasp. If I understood correctly, this is bad for the Note, because it interacts with the digitiser ?
peseta said:
Looks like a practical solution.
However it has a magnetic clasp. If I understood correctly, this is bad for the Note, because it interacts with the digitiser ?
Click to expand...
Click to collapse
U didn't indicate u want one without a magnetic clasp. :silly:
I have a normal wallet style flip case and it has a magnet, doesn't interfere my GNote's digitizer or wacom sensor.
Sent from my GT-N7000 using Tapatalk 2
Is there any flip cover that only the front one like apple ipad one? So could use any hardcase...
Thanks for the input.
The Mercury colour case looks good, i'll bear it in mind. There a couple of youtube vids knocking about so i'll do some more research.
As usual, you need a woolly coat to get the things you want...
Detachable front cover case for the iPhone A larger case for the Note would work well.
----
There must be a demand for such a case? I can't be the only one who prefers not to use screen protectors, but finds a flip case gets in the way of using the phone, especially the camera!?
The search continues....
Edit; Found another one;
Luxury window flip case- not sure where the 'luxury' element of the case comes in as to be fair, it looks cheap and nasty!
maybe you can try modding one using valcro
akromatic said:
maybe you can try modding one using valcro
Click to expand...
Click to collapse
I did, it looked naff! Ive gone back to using screen protectors without a flip case until i find what im looking for.
kbm said:
Im looking for a flip case where you can detach the 'flip' part of the case. At the moment im using the Samsung Flip case (instead of a screen protector) within a cheap TPU case that has a kickstand. Im finding the camera tricky to use with the flip part of the case getting in the way, so it would be good if i could take it off when needed, then reattach it. :good:
I've done a DIY mod on the flip case - cut off the 'flip' part and stuck it to the TPU with velcro - as you could imagine its far from perfect...
I've been searching for a while but nothing so far.....
Click to expand...
Click to collapse
I have one of these : http://www.ebay.co.uk/itm/AIO-BLACK..._MobilePhonesCasesPouches&hash=item2570d08d2f
You can remove the phone relatively easy when you need to use the camera, is a bit fiddly to get to the stylus (but I have large fingers)
the magnetic clasp locks around the rear of the case/phone so does not affect the digitizer.
Hope this helps
I was also looking for a detachable flip casing .....the normal flip casing is uncomfortable feels weird when capturing pictures & recording videos
I bought a blue flip case says official from amazon, it was fine for the first month, but after that, I just took it off, its so uncomfortable to use. any suggestions for some others
I've got one of these - Amazon Link and it's just the job.
Easy to detach and the corners have save my note a couple of times now.
hey u guys ever try buying from http://list.qoo10.sg/item/Q100/406210991?sellerview=on?
pretty cheap...i bought a so call Korean brand flip case..for sgd$9? will be waiting for it..
here is a detachable flipcase on ebay here is the link for a youtube video i know it is for iphone but still http://www.youtube.com/watch?v=8CVG4czXcIs
here is the link for the case for the note it is a tpu case with detachable flip http://www.ebay.com/itm/Samsung-Gal...919296?pt=PDA_Accessories&hash=item4d03b8b880
it has a magnet but it doesn't damage the screen it is a very nice case
Only want to protect the front, something like the iPad smart cover that hook onto the side. I have a skin behind so i don't want to block it with a case
self-deleted
i don't drop stuff . nvm i got my answer somewhere else
/close
Did you find one?
Sent from my Nexus 7 using Tapatalk 2
unciviilized said:
Did you find one?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I would also like to know!
Me too!
Sent from my Nexus 7 using Tapatalk 4
bump..
I'm also looking for something similar. Either something just for the front or something thin/clear on the back. What is the slimmest case/cover available for decently cheap? Not really worried about dropping it; just want something to protect it inside of a coat pocket and looks decent
I don't think he's gonna tell us lol
Sent from my Nexus 7 using Tapatalk 4
mixalot2008 said:
I don't think he's gonna tell us lol
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
sharing is caring :good:
i have been looking for this type of case but all i see is leather ones
The official Premium Case or Poetic Slimline case are probably the closest you'll get. The latter is my preference.
I'm surprised no manufacturer has worked out a way to adhesively attach a screen cover like the Slimline's onto the edge of the tablet, you'd just need a moulded plastic strip to run down the left edge of the machine covered with some non-permanent adhesive a la the Dodocase that the actual cover was attached to. Then you'd have something that works a bit like the iPad smartcase without the magnets.
hyperspacey said:
The official Premium Case or Poetic Slimline case are probably the closest you'll get. The latter is my preference.
I'm surprised no manufacturer has worked out a way to adhesively attach a screen cover like the Slimline's onto the edge of the tablet, you'd just need a moulded plastic strip to run down the left edge of the machine covered with some non-permanent adhesive a la the Dodocase that the actual cover was attached to. Then you'd have something that works a bit like the iPad smartcase without the magnets.
Click to expand...
Click to collapse
The poetic slimline is still too bulky for me. It essentially triples the thickness with that extra back layer plus it hides skins.
I too am surprised; it seems fairly straightforward to make...
hyperspacey said:
I'm surprised no manufacturer has worked out a way to adhesively attach a screen cover like the Slimline's onto the edge of the tablet, you'd just need a moulded plastic strip to run down the left edge of the machine covered with some non-permanent adhesive a la the Dodocase that the actual cover was attached to. Then you'd have something that works a bit like the iPad smartcase without the magnets.
Click to expand...
Click to collapse
Thats a pretty good idea. The only thing could be tricky is the magnets hold the cover down on the iPad.
This is the only case I've seen which has a "transparent" back.
I've not seen it in the flesh, so I don't how how good they are, or if they can be shipped overseas.
endlesstrail said:
This is the only case I've seen which has a "transparent" back.
I've not seen it in the flesh, so I don't how how good they are, or if they can be shipped overseas.
Click to expand...
Click to collapse
It seems more white or translucent than clear. Are there any cases out there that just cover the front? (Like a keyboard case just without the keyboard so it's essentially just a plastic cover) Or maybe something like what Logitech has for their keyboards where it covers the device but when removed can act as a stand.
Mokocase is nice
Johnny_Fever said:
Mokocase is nice
Click to expand...
Click to collapse
Got that one as well. Like it very much
sen-cha said:
Thats a pretty good idea. The only thing could be tricky is the magnets hold the cover down on the iPad.
Click to expand...
Click to collapse
Not to mention that Apple patented the magnetic latching mechanism that holds the cover on, so any other cover like that (with no back) would need to either find an alternative method (like the adhesive mentioned above) or license the technology from Apple. Or just do it and wait to get sued...
I bought the rooCASE Origami case from Amazon - http://www.amazon.com/rooCASE-Google-Tablet-Origami-SlimShell/dp/B00ET9H588
It's thin enough and functions very much like the iPad Smart Cover, with the additional benefit of allowing the N7 to stand on portrait mode.
The biggest problem: for landscape mode, where you fold the front cover just like the iPad, the magnet in the front cover WILL turn OFF the Nexus 7. I asked for a replacment form the seller (she said it's defective), but the replacement did the same thing.
I was wondering if anyone had thoughts or has even tried these types of car mounts.
http://www.ebay.com/itm/Nexcon-Magn...lde-/221655676812?hash=item339bb5378c&vxp=mtr
Its magnetic so I was wondering if people thought our Nexus 5 would work with it without the metal plate they supply. Seeing as the Nexus 5 has magnets in it's back I would think the only question is if the magnets used are attracted to the ones in the Nexus 5 and the placement of the magnets. I may get one to try out but I wanted to see people's thoughts anyway.
Well as far as I am informed and seen, inside your nexus 5 are metal discs not magnets, the magnets comes in the original nexus 5 wireless charger. Hope this make it more clear, and I think they made it a bit vague so you would get it then they would simply tells you to get their magmatic cover !!!
ahmad shishani said:
Well as far as I am informed and seen, inside your nexus 5 are metal discs not magnets, the magnets comes in the original nexus 5 wireless charger. Hope this make it more clear, and I think they made it a bit vague so you would get it then they would simply tells you to get their magmatic cover !!!
Click to expand...
Click to collapse
I wasn't sure if inside the Nexus 5 are magnets or, as you say, metal disks. I know my old Palm Pre had magnets in the back of the phone for it's TouchStone charger. I actually have two of those. And the Nexus 5 actually connects with that really well. Almost like it was made for it. If these docks are similar to what the TouchStone charger is as far as magnet placement, it should work really well without that metal plate they give you. But the plate does come with it to use with a phone case just in case. So I may just put down the 10 bucks or so and see how it goes.
Cool let me know what turns out, I may kick one too off ebay
I have this one in my car http://www.amazon.com/InfiniApps-Smartphones-Cradle-less-Quick-snap-technology/dp/B00DPMNNUO/ref=sr_1_38?ie=UTF8&qid=1427845784&sr=8-38&keywords=magnetic+car+mount
It works very well, and the phone stays locked in place. It attaches to the 4 metal plates in the back cover of the Nexus 5 meant for the official Qi charger. You can't use a case though, or the magnets won't be strong enough to hold. If you do use a case (thin TPU or thin hard case only) then you will need the metal plate insert for it to work. But even still, the phone sticks way better without a case. It sticks best in vertical position, if you do landscape it needs to be centered perfectly or it will start to twist back to vertical over big bumps, it won't come off, but it will turn.
I use an nGroove Snap (http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00HMDYH2U) and it works just fine even without the metal plate.
DosNexus said:
I have this one in my car http://www.amazon.com/InfiniApps-Smartphones-Cradle-less-Quick-snap-technology/dp/B00DPMNNUO/ref=sr_1_38?ie=UTF8&qid=1427845784&sr=8-38&keywords=magnetic+car+mount
It works very well, and the phone stays locked in place. It attaches to the 4 metal plates in the back cover of the Nexus 5 meant for the official Qi charger. You can't use a case though, or the magnets won't be strong enough to hold. If you do use a case (thin TPU or thin hard case only) then you will need the metal plate insert for it to work. But even still, the phone sticks way better without a case. It sticks best in vertical position, if you do landscape it needs to be centered perfectly or it will start to twist back to vertical over big bumps, it won't come off, but it will turn.
Click to expand...
Click to collapse
rpr69 said:
I use an nGroove Snap (http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00HMDYH2U) and it works just fine even without the metal plate.
Click to expand...
Click to collapse
Good to know that these do in fact work without those metal plates. I thought they'd might but thanks for confirming it. I don't use a case so it should be perfect for me. I'll definitely be getting one now.
Made my own car charger. Too bad my Spigen case is too thick, so can't use it. Or I just have to risk breaking my phone by not using the case..... Dilemma...
I use kenu airframe + google Nexus qi charger = perfect solution.
I ended up buying this one and it works perfectly.
http://www.ebay.com/itm/381075023900?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Do you need to use the included magnetic stickers? Or will it lock to the magnets inside the phone?
JaymzTA said:
Do you need to use the included magnetic stickers? Or will it lock to the magnets inside the phone?
Click to expand...
Click to collapse
Nope. It works as is. And it works nicely too. If the next Nexus doesn't have magnets, I'm going to be sad.
I have another mount, I believe it's called "iMagnet" which is almost identical. After using it for the past year with my nexus 5, I have some gripes about it. It's not an incredibly solid grip, which means every bump is going to make your phone start rotating one way or the other. I like to place my phone in landscape mode but since it's in landscape mode, the phone will twist on the mount until it's touching the dash. I'll periodically move the phone back to the center of the mount while I'm driving which probably isn't safe. Ive used my phone with cases, without cases, with dbrand skins, without. The official Google "bumper" and my spigen neo hybrid are both too thick for the mount to have a good hold, so it really slides all over the place. Using a skin, doesn't affect it too much though. If I were to get another car mount I wouldn't get one of these. It's not horrible, but it just gets annoying.
Sent from my Nexus 5 using XDA Free mobile app
jsgraphicart said:
Nope. It works as is. And it works nicely too. If the next Nexus doesn't have magnets, I'm going to be sad.
Click to expand...
Click to collapse
On your recommendation I just ordered one from amazon
JaymzTA said:
On your recommendation I just ordered one from amazon
Click to expand...
Click to collapse
I think you'll be happy with it
I have one, and I love it. I've got one of the slim Spigen cases and I put one of the metal plates between the phone and the case. I had to play with the position to make sure I could still use NFC, Qi charging, and GPS worked fine.
Now I feel super confident in my purchase. Thanks guys!
I've been happy with this one from amazon http://www.amazon.com/gp/product/B00V54LQO4?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00 only $10.99.
jsgraphicart said:
I think you'll be happy with it
Click to expand...
Click to collapse
I just received it in the mail, and the build quality seems pretty good. I just had neck surgery the other day, so I won't be able to use it for at least a few weeks. I can't wait to try it out!
Hey, i bought an aftermarket flip cover from ebay. The opening circle, doesn't have a glass but i am fine with it, since i have a glass protector on.
The issue is, when i flip it all the way so i can hold it, the magnet sensor activates and puts the phone to whatever it is, when the cover is closed.
Any issues with the official flip cases?
And i hope someone creates a stock rom for this, because the battery even on standby, sucks.
Cheers!
I bought a knock-off case from a local store that states it's for the ZE551ML - Goospery WOW Series Flip Case cover.
No issues for me when flipping the case all the way back, but the magnet inside the flip is definitely misaligned. The smartview/Asus Cover only works if I hold the flip-cover down and to the left. Does yours work correctly when closed? I can't speak to the functionality of the official case or other knockoffs, but I'm curious. There are so many on eBay that are cheaper than what I paid locally, but I'm wondering if they also have magnet issues.
Been using the Asus case for a couple of days I never had an issue
Kittys said:
I bought a knock-off case from a local store that states it's for the ZE551ML - Goospery WOW Series Flip Case cover.
No issues for me when flipping the case all the way back, but the magnet inside the flip is definitely misaligned. The smartview/Asus Cover only works if I hold the flip-cover down and to the left. Does yours work correctly when closed? I can't speak to the functionality of the official case or other knockoffs, but I'm curious. There are so many on eBay that are cheaper than what I paid locally, but I'm wondering if they also have magnet issues.
Click to expand...
Click to collapse
I bought the same case now with new update misalinged magnet is creating automatic wakeup. Adding extra magnet helps bt wont it cause any harm
I also had random wake ups and that affected my battery.
And yes all the functions worked correctly.
I want to know the effect of extra magnet .?? Do they harm the device?
Can you please tell me where your magnets are located? I asked a question in the QA forum about my aftermarket case not triggering the screen.
Sent from my SPH-L710 using Tapatalk
It is in left side near the back button
Thanks. That's where my magnet is. I will try a stronger one.