Develop Bugs

how to upgrade cm?

SGH-T999L with CM_10.1.2.
I received ROM update notification for 10.2.1. What's the correct way to upgrade the ROM?
Thanks.

Either download the Rom and Gapps zips to sd card or use the built in app. Typically clicking on the Notification will launch the update process.

Perseus71 said:
Either download the Rom and Gapps zips to sd card or use the built in app. Typically clicking on the Notification will launch the update process.
Click to expand...
Click to collapse
Thank you!

Perseus71 said:
Either download the Rom and Gapps zips to sd card or use the built in app. Typically clicking on the Notification will launch the update process.
Click to expand...
Click to collapse
Searched and read a few articles regarding flashing ROMs, most seem mentioning 'wipe data/factory reset' and 'wipe cache partition'. Does those wipe operation wipe off my apps and data?
Do I need do those wipes if I am upgrading from cm10.2 to cm11? Or only needed when flashing different ROMs?

Yes you need to wipe Dalvik and Cache. If you wipe only those 2, your data is safe.

Perseus71 said:
Yes you need to wipe Dalvik and Cache. If you wipe only those 2, your data is safe.
Click to expand...
Click to collapse
Thanks.
Seems TWRP v2.6.3.0 doesn't work for cm11? Tried install cm-11-20140210-SNAPSHOT-M3-d2tmo.zip but always failed.
I had to install CWM_6.0.4.3 and then install cm-11-20140210-SNAPSHOT-M3-d2tmo.zip

Try some other Rom before ruling out the recovery.

Perseus71 said:
Try some other Rom before ruling out the recovery.
Click to expand...
Click to collapse
It might be.
Is there a dedicated thread to discuss/ask question for CM11 for Tmobile GS3? Or just here?
Have noticed following:
the clock app doesn't work, try to run it and immediate stopped
the wifi icon in top right corner used to show blue when it is connected, now it is always white.

Running M3 and ROM itself is great. Noticed a few things:
* clock and camera app didn't work, I download stock clock and camera app and install again, they works but stop working again after reboot.
* using tasker to turn on wifi hotspot via secure settings, received secure settings crashed message. turn on/off wifi hotspot via system setting works fine.
* on 3/26, the phone only has 5% battery usage over night. However last night the phone has 80% of battery around 11pm, but down to 1% at 2:30am and the phone shut down. (I was woke due to the vibration from the phone when it shut down). wasn't sure what's going on. BetterBatteryStats didn't capture stats since the phone powered off and it only has reference "since boot" now.
anyone now has similar issue? and how to solve it?
which one is the most stable CM11 release?
Thanks.

This is not the right place to post questions on the Rom. You will have to do a little search and you will find the right thread.

^^^ this ^^^
No need to start a new thread when members should be asking and reading from the actual ROM/build thread.

Reboot loop [SOLVED]

So my sister recently bought a used phone running 4.1.2 and it started rebooting on its own for some reason or another. I am able to get into twrp 2.3.1.1 recovery and do a factory reset but the reboot loop problem still remains. I tried the other options in the wipe menu like wiping the internal storage but it says its unable to mount /data. Even in the Mount Menu i am unable to check the Mount data box.
I've also got the hurricane v4 rom downloaded but i am unable to install it for some reason. Is it because i am unable to mount the /data? Would a Format data work to install the hurricane rom? I've tried to download the 4.3 stock rom but not successful due to such a crappy internet connection. Luckily the hurricane v4 rom that i got from here supported the resume download function.

Ktulu89 said:
So my sister recently bought a used phone running 4.1.2 and it started rebooting on its own for some reason or another. I am able to get into twrp 2.3.1.1 recovery and do a factory reset but the reboot loop problem still remains. I tried the other options in the wipe menu like wiping the internal storage but it says its unable to mount /data. Even in the Mount Menu i am unable to check the Mount data box.
I've also got the hurricane v4 rom downloaded but i am unable to install it for some reason. Is it because i am unable to mount the /data? Would a Format data work to install the hurricane rom? I've tried to download the 4.3 stock rom but not successful due to such a crappy internet connection. Luckily the hurricane v4 rom that i got from here supported the resume download function.
Click to expand...
Click to collapse
I also have note 2 with this strange reboot problem.
The OS doesn't matter at all for me (check that also).
If the problem will still remain, then I must say that it's a hardware malfunction.
Mine has it too, and does some random reboots at any time, specially when it has been used for longer time.

Ktulu89 said:
So my sister recently bought a used phone running 4.1.2 and it started rebooting on its own for some reason or another. I am able to get into twrp 2.3.1.1 recovery and do a factory reset but the reboot loop problem still remains. I tried the other options in the wipe menu like wiping the internal storage but it says its unable to mount /data. Even in the Mount Menu i am unable to check the Mount data box.
I've also got the hurricane v4 rom downloaded but i am unable to install it for some reason. Is it because i am unable to mount the /data? Would a Format data work to install the hurricane rom? I've tried to download the 4.3 stock rom but not successful due to such a crappy internet connection. Luckily the hurricane v4 rom that i got from here supported the resume download function.
Click to expand...
Click to collapse
Try flashing the latest PhilzRecovery and give it a shot.

toulan said:
Try flashing the latest PhilzRecovery and give it a shot.
Click to expand...
Click to collapse
I have philz touch 6.26.6 clockworkmod v 6.0.4.8 installed. I go into the Wipe data/factory reset to do a factory reset but seems like it hangs and reboots. Seems like its unable to mount and format /data still. Can someone shed some light on this?

Ktulu89 said:
I have philz touch 6.26.6 clockworkmod v 6.0.4.8 installed. I go into the Wipe data/factory reset to do a factory reset but seems like it hangs and reboots. Seems like its unable to mount and format /data still. Can someone shed some light on this?
Click to expand...
Click to collapse
Go to mounts and storage and click on format/system, format/cache, format/preload , format/data and format/data and data/media (/sdcard)<--- this will format your internal storage,so back up if you have anything saved on it..NOTE: Do NOT format storage/sdcard1 cause this is your external sd card if you accidentally do format it you will lose all the contents on your sd card.If you still want to format your external sd card by this way make sure you have a card reader handy to be able to transfer the downloaded ROM and other contents on your sd card.
Now go back to main menu and click on advanced menu and wipe dalvik cache ,once again go back to main menu and click on wipe cache partition and go ahead and wipe it.At the very end go back to main menu and click on wipe data/factory reset and choose Clean to install a New ROM.Done.You have successfully performed all the wipes.Now you can go ahead and flash the ROM.

singhpratik87 said:
Go to mounts and storage and click on format/system, format/cache, format/preload , format/data and format/data and data/media (/sdcard)<--- this will format your internal storage,so back up if you have anything saved on it..NOTE: Do NOT format storage/sdcard1 cause this is your external sd card if you accidentally do format it you will lose all the contents on your sd card.If you still want to format your external sd card by this way make sure you have a card reader handy to be able to transfer the downloaded ROM and other contents on your sd card.
Now go back to main menu and click on advanced menu and wipe dalvik cache ,once again go back to main menu and click on wipe cache partition and go ahead and wipe it.At the very end go back to main menu and click on wipe data/factory reset and choose Clean to install a New ROM.Done.You have successfully performed all the wipes.Now you can go ahead and flash the ROM.
Click to expand...
Click to collapse
Installed the hurricane rom perfectly! Thanks!
One more thing, the phone is not getting service or recognizing the sim card. Is there anything i can do to get service again?

Ktulu89 said:
Installed the hurricane rom perfectly! Thanks!
One more thing, the phone is not getting service or recognizing the sim card. Is there anything i can do to get service again?
Click to expand...
Click to collapse
Go to settings and see if you see a baseband version is listed also check if imei is correct and doesn't start with 0049
Sent from my GT-N7100 using Tapatalk

singhpratik87 said:
Go to settings and see if you see a baseband version is listed also check if imei is correct and doesn't start with 0049
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
The baseband version says its unknown and imei says unknown too.

Ktulu89 said:
The baseband version says its unknown and imei says unknown too.
Click to expand...
Click to collapse
Okay you need to reflash modem I'm in phone so can't link you up with hurricane modem tool but in my signature it says JellyKat FAQ click on that and in there you'll see hurricane modem changer tool link , go visit that thread , download version 5, and flash it recovery , aroma install will open and choose one of the newer modems and see if that fixes your no sim card detected issue *fingers crossed *
Sent from my GT-N7100 using Tapatalk

singhpratik87 said:
Okay you need to reflash modem I'm in phone so can't link you up with hurricane modem tool but in my signature it says JellyKat FAQ click on that and in there you'll see hurricane modem changer tool link , go visit that thread , download version 5, and flash it recovery , aroma install will open and choose one of the newer modems and see if that fixes your no sim card detected issue *fingers crossed *
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Finally got it downloaded! I've tried one of the newer modems but no luck yet. I'm guessing keep trying until i get service right?

Ktulu89 said:
Finally got it downloaded! I've tried one of the newer modems but no luck yet. I'm guessing keep trying until i get service right?
Click to expand...
Click to collapse
Umm I had this issue once and flashing one of the modems solved my issue , you might have to restore efs backup look for Dr.Ketan thread on how to restore efs if modems don't work out
Sent from my GT-N7100 using Tapatalk

singhpratik87 said:
Umm I had this issue once and flashing one of the modems solved my issue , you might have to restore efs backup look for Dr.Ketan thread on how to restore efs if modems don't work out
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
None of the modems worked. I've deleted the /system and /data and all the steps you gave me and restored back to 4.1.2 with twrp and the darnedest thing happened. no reboot loop, only thing is that there still is no service. The GCI screen shows up when booting (my cell phone service) . i was pretty sure the efs was checked when i backed it up a few days ago. I think i dun goofed on this one.
EDIT: Looking at the 4.1.2 backed up rom on my computer, there is a efs.ext4.win.md5 and a efs.ext4.win file on there.

Ktulu89 said:
None of the modems worked. I've deleted the /system and /data and all the steps you gave me and restored back to 4.1.2 with twrp and the darnedest thing happened. no reboot loop, only thing is that there still is no service. The GCI screen shows up when booting (my cell phone service) . i was pretty sure the efs was checked when i backed it up a few days ago. I think i dun goofed on this one.
Click to expand...
Click to collapse
read this guide to restore imei if you have backed up efs http://forum.xda-developers.com/showthread.php?t=2420881 that's your last resort

singhpratik87 said:
read this guide to restore imei if you have backed up efs http://forum.xda-developers.com/showthread.php?t=2420881 that's your last resort
Click to expand...
Click to collapse
Flashing stock also reflashes the modem, does it not?
So there is still the 4.3 stock ROM which he was not able to download so far, unfortunately.

Yakobus said:
Flashing stock also reflashes the modem, does it not?
So there is still the 4.3 stock ROM which he was not able to download so far, unfortunately.
Click to expand...
Click to collapse
Yes it does so if he manages to download it ,things should be easier for him.

singhpratik87 said:
Yes it does so if he manages to download it ,things should be easier for him.
Click to expand...
Click to collapse
I would rather try to fix the download issues or to get the file from somebody else instead of wasting time on flashing modem after modem.

Yakobus said:
Flashing stock also reflashes the modem, does it not?
So there is still the 4.3 stock ROM which he was not able to download so far, unfortunately.
Click to expand...
Click to collapse
So i finally got a premium link download on rapidgator and am downloading this stock rom atm. so its resumable (hooray!).
When done, i use the "PHONE" option in odin right? Im guessing installing the stock rom also re installs the stock recovery? Crossing my fingers (and toes lol) hoping this download finishes. If her phone doesnt work after all this i talked her into letting me buy it. It seems like a really nice phone. If she lets me buy it im thinking to get the Moga controller afterwards and installing some emulators and games, it'll be a nice little portable system.

SOLVED
Finally got the stock 4.3 download and installed and now the phone is working. Thanks everyone who contributed to help.

Ktulu89 said:
Finally got the stock 4.3 download and installed and now the phone is working. Thanks everyone who contributed to help.
Click to expand...
Click to collapse
Great! Enjoy the phone
By the way, tags are usually put in front of a thread's title
Nevermind, the main point is to tag it as solved :good:

[Q] WiFi not working on cm 11?

I'm running cm 10.2.1 that I installed using cwm Recovery. I had to modify the update script using root explorer before the install but after doing that the install went smoothly and I haven't had any real issues with the ROM. I had almost given up trying to update to cm 11 but decided to try the install with philz recovery which actually worked. However, after the update to cm 11 my mobile data no longer works and I am not even able to connect to WiFi. At first I thought that this may have something to do with the APN settings since I am using the boost version of the sprint phone, but the APN settings on my cm 10.2.1 are set for sprint and work fine and they don't change once I install the update. Also, I don't know for sure but I don't even think that the APN being incorrectly set would effect my ability to connect to WiFi. Somebody please give me some advice on this. Thank you.

zomvam13 said:
I'm running cm 10.2.1 that I installed using cwm Recovery. I had to modify the update script using root explorer before the install but after doing that the install went smoothly and I haven't had any real issues with the ROM. I had almost given up trying to update to cm 11 but decided to try the install with philz recovery which actually worked. However, after the update to cm 11 my mobile data no longer works and I am not even able to connect to WiFi. At first I thought that this may have something to do with the APN settings since I am using the boost version of the sprint phone, but the APN settings on my cm 10.2.1 are set for sprint and work fine and they don't change once I install the update. Also, I don't know for sure but I don't even think that the APN being incorrectly set would effect my ability to connect to WiFi. Somebody please give me some advice on this. Thank you.
Click to expand...
Click to collapse
When you installed CM11, did you do clean install?
PhilZ has a setting where you can do a wipe solely for the purpose of installing a new ROM. (Philz is my one and only recovery.)
You cannot simply flash CM11 over CM10. You need to do a clean install, so you should use a backup utility to backup all your user apps. (You'll also want to download a GAPPs package that is compatible with CM11.)
APN configurations would not affect your WiFi connectivity. DIrty flashing CM11 over CM10 might, it could also be related to a custom kernel. Make sure if you're using a custom kernel, that it is compatible with whatever Android version you're using (e.g. 4.4.4)
Hope this helps.

Higgs_Boson said:
When you installed CM11, did you do clean install?
PhilZ has a setting where you can do a wipe solely for the purpose of installing a new ROM. (Philz is my one and only recovery.)
You cannot simply flash CM11 over CM10. You need to do a clean install, so you should use a backup utility to backup all your user apps. (You'll also want to download a GAPPs package that is compatible with CM11.)
APN configurations would not affect your WiFi connectivity. DIrty flashing CM11 over CM10 might, it could also be related to a custom kernel. Make sure if you're using a custom kernel, that it is compatible with whatever Android version you're using (e.g. 4.4.4)
Hope this helps.
Click to expand...
Click to collapse
Thank you. Yeah I tried this and it did help with my mobile data, but I am still unable to connect to WiFi. Before my WiFi icon in quick setting just stayed red and now the icon is normal but when I try to connect i get an authentication error. I know I have the password right. Not sure what to do.

zomvam13 said:
Thank you. Yeah I tried this and it did help with my mobile data, but I am still unable to connect to WiFi. Before my WiFi icon in quick setting just stayed red and now the icon is normal but when I try to connect i get an authentication error. I know I have the password right. Not sure what to do.
Click to expand...
Click to collapse
What does the authentication error say?
Also, what build of CM11 are you using?
Make sure you are using the CM11 builds for d2lte:
https://download.cyanogenmod.org/?device=d2lte
Also, use the Philz recovery found here:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Please help us help you. Be specific about exactly what steps you took to flash the ROM and any errors (with details) that you encounter.

Higgs_Boson said:
What does the authentication error say?
Also, what build of CM11 are you using?
Make sure you are using the CM11 builds for d2lte:
Also, use the Philz recovery found here:
Please help us help you. Be specific about exactly what steps you took to flash the ROM and any errors (with details) that you encounter.
Click to expand...
Click to collapse
In the WiFi menu I choose my network and then enter the password and first It tells me "authenticating" which is normal, but then instead of connecting it just says authentication problem. That's all it says. I have tried turning WiFi off then back on, rechecked the password, reboot the phone and everything else I can think of.
This was the same for the 08/13/14 and the 08/14/14 nightly builds for the d2lte which I downloaded from the cm updater in settings>about phone>CyanogenMod updates. I used the app root explorer to extract the zip and then went in to the update script and modified it so that I would not get a status 7 error. Then I zipped the files back up like they were only now with the modified update script, and booted into recovery. I am using philz touch 6.48.4 for the d2lte which I flashed with mobile Odin pro. I chose the clean for new ROM option and then installed the ROM and then flashed the gapps-kk-20140105-signed.zip. then I rebooted the phone and began the set up process. It seems that everything works fine other than that I am unable to connect to WiFi.
I also tried the same process, except after cleaning to install a new ROM I also wiped the dalvik cache. This had no effect.

zomvam13 said:
In the WiFi menu I choose my network and then enter the password and first It tells me "authenticating" which is normal, but then instead of connecting it just says authentication problem. That's all it says. I have tried turning WiFi off then back on, rechecked the password, reboot the phone and everything else I can think of.
This was the same for the 08/13/14 and the 08/14/14 nightly builds for the d2lte which I downloaded from the cm updater in settings>about phone>CyanogenMod updates. I used the app root explorer to extract the zip and then went in to the update script and modified it so that I would not get a status 7 error. Then I zipped the files back up like they were only now with the modified update script, and booted into recovery. I am using philz touch 6.48.4 for the d2lte which I flashed with mobile Odin pro. I chose the clean for new ROM option and then installed the ROM and then flashed the gapps-kk-20140105-signed.zip. then I rebooted the phone and began the set up process. It seems that everything works fine other than that I am unable to connect to WiFi.
I also tried the same process, except after cleaning to install a new ROM I also wiped the dalvik cache. This had no effect.
Click to expand...
Click to collapse
First and foremost, those nightlies you tested are Android 4.4.4. Here is a 4.4.4 GAPPs package: https://www.androidfilehost.com/?fid=23610159112653416
Why are you tweaking the updater script? This should not be necessary. I flash ROMs just fine with PhilZ. Also, you do not need to flash recoveries via ODIN. You can download the .zip (not .md5) file and flash it in recovery. The recovery will flash the recovery over the recovery.
When you reflash the ROM and you have a fresh clean slate on the phone, unplug the router for 30 seconds to power cycle the router, and plug back in. The router may be having an issue with the MAC Address to your network card in your phone.
You can show the password in the WiFi interface to ensure that you are typing the correct password. If you suspect that you are getting the password wrong, you can go into your router's settings and change the password. (e.g. http://192.168.0.1 --> Change the security settings).
Give it another shot. Do not edit the updater script. I've never had a status 7 error. If needed, reflash the recovery as a zip file in recovery.
I hope this helps.

Higgs_Boson said:
First and foremost, those nightlies you tested are Android 4.4.4. Here is a 4.4.4 GAPPs package: https://www.androidfilehost.com/?fid=23610159112653416
Why are you tweaking the updater script? This should not be necessary. I flash ROMs just fine with PhilZ. Also, you do not need to flash recoveries via ODIN. You can download the .zip (not .md5) file and flash it in recovery. The recovery will flash the recovery over the recovery.
When you reflash the ROM and you have a fresh clean slate on the phone, unplug the router for 30 seconds to power cycle the router, and plug back in. The router may be having an issue with the MAC Address to your network card in your phone.
You can show the password in the WiFi interface to ensure that you are typing the correct password. If you suspect that you are getting the password wrong, you can go into your router's settings and change the password. (e.g. http://192.168.0.1 --> Change the security settings).
Give it another shot. Do not edit the updater script. I've never had a status 7 error. If needed, reflash the recovery as a zip file in recovery.
I hope this helps.
Click to expand...
Click to collapse
So.... Even after my certainty that I had the WiFi password right, it turns out that I was leaving out one letter. Wow!
Although I am still having a little issue with my mobile data. For some reason when I turn off my WiFi my mobile data goes off too. Sometimes it comes back on and sometimes it doesn't. Thanks a lit for the help.

zomvam13 said:
So.... Even after my certainty that I had the WiFi password right, it turns out that I was leaving out one letter. Wow!
Although I am still having a little issue with my mobile data. For some reason when I turn off my WiFi my mobile data goes off too. Sometimes it comes back on and sometimes it doesn't. Thanks a lit for the help.
Click to expand...
Click to collapse
Are you sure your mobile data is, in fact, switching off? There could just be some latency between the WiFi switching off and mobile data coming on.
You might try clean flashing the ROM again, or clean flashing a newer nightly altogether.

CM12.1 WLAN can not be activated

Hi! I flashed the newest nighly and recovery (cm-12.1-20151019-NIGHTLY-amami.zip) and i can not activate WLAN!
In settings the switch ist light grey and if i touch it, nothing started. I can not move the button!
Then i go back to Stock ROM [XperiaZ1c_D5503_14.2.A.1.114_GenericDE(1279-6978)] to check the function of the WLAN modul and ... WLAN could be activated an i could use it. Then i flashed back to CM12.1, but the same problem! Could it be that i am the only person with this problem? What could i do? What should i do?
It takes me hours and nerves, but i can not find a solution. Anyone an idea?

Locomachine said:
Hi! I flashed the newest nighly and recovery (cm-12.1-20151019-NIGHTLY-amami.zip) and i can not activate WLAN!
In settings the switch ist light grey and if i touch it, nothing started. I can not move the button!
Then i go back to Stock ROM [XperiaZ1c_D5503_14.2.A.1.114_GenericDE(1279-6978)] to check the function of the WLAN modul and ... WLAN could be activated an i could use it. Then i flashed back to CM12.1, but the same problem! Could it be that i am the only person with this problem? What could i do? What should i do?
It takes me hours and nerves, but i can not find a solution. Anyone an idea?
Click to expand...
Click to collapse
I've gotten that w/ dirty flashes or mods before. Try full wipe, (system and data), and clean install. Should be OK.

levone1 said:
I've gotten that w/ dirty flashes or mods before. Try full wipe, (system and data), and clean install. Should be OK.
Click to expand...
Click to collapse
Clean install, what does it mean especially?
I take this steps:
1. Cyanogen Recovery
2. Wipe cache partition
3. Wipe data/factory reset
4. Apply update
5. Chose from SD Card (cm-12.1-20151019-NIGHTLY-amami.zip)
6. Installing
7. Wipe cache partition
8. Reboot system now
9. Language choice
10. Choose WLAN ... WLAN is activated .. the icon ist grey ... nothing!!!
11. Can only choose without (Ohne)
The same thing as everyday^^
First i thougt, the WLAN modul has a malfuntion, but with STOCK ROM 4.3 i can use it!
Special ideas someone? I would try CM12, but the files are down on cyanogenmod.org .. too old :/

Is wifi working on new releases of cm12? The issues list is referred to "cm-12.1-20150504-NIGHTLY"

Try running these commands at a command line shell:
Code:
su
/system/bin/mac-update
...and then reboot.
Reference:
http://forum.xda-developers.com/son...ipop-amami-t2957489/post63254336#post63254336

Locomachine said:
Clean install, what does it mean especially?
I take this steps:
1. Cyanogen Recovery
2. Wipe cache partition
3. Wipe data/factory reset
4. Apply update
5. Chose from SD Card (cm-12.1-20151019-NIGHTLY-amami.zip)
6. Installing
7. Wipe cache partition
8. Reboot system now
9. Language choice
10. Choose WLAN ... WLAN is activated .. the icon ist grey ... nothing!!!
11. Can only choose without (Ohne)
The same thing as everyday^^
First i thougt, the WLAN modul has a malfuntion, but with STOCK ROM 4.3 i can use it!
Special ideas someone? I would try CM12, but the files are down on cyanogenmod.org .. too old :/
Click to expand...
Click to collapse
Use different recovery. If you're booting CM, I guess you have unlocked bl, so you can flash twrp recovery - https://mega.nz/#!E4UQwIoZ!UFpur2wY3tIAU7SdjuEg5fUA6N4BAVwX_TeK_CFpTyo - with fastboot, or with Rashr, then boot to recovery, and choose wipe>advanced, and check system, data, cache, and dalvik. Then flash your ROM.

Starting from nightly October 20, wifi is now fixed on rhine platform. No manual mac-update needed

amnher said:
Starting from nightly October 20, wifi is now fixed on rhine platform. No manual mac-update needed
Click to expand...
Click to collapse
Thanks a lot amnher!! D you know other bugs? I can flash it for daily use?

amnher said:
Starting from nightly October 20, wifi is now fixed on rhine platform. No manual mac-update needed
Click to expand...
Click to collapse
:good: You are right! I take the cm-12.1-20151022-NIGHTLY-amami.zip Update for 5 minutes and ... it goes^^ Nice!
Thanks for this clean solution! Now i can use my Z1 Compact with CM12.1 (5.1.1) instead of my old Motorola Defy+ with CM11 (4.4.4)
Google free with Posteo Sync^^
THX!

Confirm, flashed on my device, no problems actually great work guys!!:good:

amnher said:
Starting from nightly October 20, wifi is now fixed on rhine platform. No manual mac-update needed
Click to expand...
Click to collapse
Nice. Here's a noteworthy message from the commit:
this WA should fix that but for this device the mac address may be wrong on first boot after wipe
Click to expand...
Click to collapse

No Wi-Fi after baseband update (Stock Rom)

no matter what baseband i flash via odin, wi-fi could not be enabled after rebooting.
baseband version changes successfully. anyone have a solution for this issue? thanks
in advance.

flash it twice!

lOtz1009 said:
flash it twice!
Click to expand...
Click to collapse
doesn`t work.
is it neccessary that kernel and baseband have to be the same version?

crxvti said:
doesn`t work.
is it neccessary that kernel and baseband have to be the same version?
Click to expand...
Click to collapse
nope, I actually found a fix for the same issue, root your phone then delete /data/misc/wifi/wpa_supplicant.conf then flash your rom again (not sure if you need to clean data and cache) with odin and it should work.

Levent2101 said:
nope, I actually found a fix for the same issue, root your phone then delete /data/misc/wifi/wpa_supplicant.conf then flash your rom again (not sure if you need to clean data and cache) with odin and it should work.
Click to expand...
Click to collapse
unfortunately, this does not work, wi-fi can only be enabled if i use the one from my rom

I was have same issue.
How did I fix it? (I have 9190)
I flashed 9195's stock rom via odin. Of course odin gave me error. I removed the battery and placed it again. Flashed latest 9190's stock rom and wifi issue solved.

i flashed a rom that fits for i9195, that is not my problem. i have no wi-fi after i update my modem. version number is correct but wi-fi can not be enabled, even if i flash it twice. my rom is the sc-stock rom
http://forum.xda-developers.com/galaxy-s4-mini/development/rom-stock-nk5-deodexed-debloated-4-4-2-t3104160

crxvti said:
no matter what baseband i flash via odin, wi-fi could not be enabled after rebooting.
baseband version changes successfully. anyone have a solution for this issue? thanks
in advance.
Click to expand...
Click to collapse
The ROM controls the wifi, not the modem. Strange that multiple ROMs can't even be enabled, I suspect data is left somewhere, do full wipe to install a new ROM so all old data etc is wiped and make sure you are not installing app data etc from a backup for this.
Else it might be the kernel.........

IronRoo said:
The ROM controls the wifi, not the modem. Strange that multiple ROMs can't even be enabled, I suspect data is left somewhere, do full wipe to install a new ROM so all old data etc is wiped and make sure you are not installing app data etc from a backup for this.
Else it might be the kernel.........
Click to expand...
Click to collapse
wi-fi is working with the baseband which is included in the rom (until i flash another baseband, then it stops)