Related
This is my gf's kindle fire and she wanted it rooted to have the google play store. This is completely untouched Kindle and on windows 7 pc. So I downloaded the KFU latest release 0.9.6 and proceeded w/ option 2 to install permanent root. Let it sit for about an hour with the please wait and waiting for device messages at the bottom of the screen. I wasnt sure how much longer this would be so i just let it sit. Couple minutes later my gf comes and let me know that she unplugged it accidentally while vacuuming. Im now stuck on the TWRP screen and will not reboot at all. If it try to reboot i get a message saying " E: System in not installed - preventing reboot! " which makes me think that the OS got wiped somehow. All I can do is let it run out of battery. Now in the KFU abd status: Offline and boot status: Unknown. Although that Windows will recognize the device as its showing up in device manager under Adroid Phone: Android ADB interface. What can I do?
not showing up.
Letting your battery run out would be one of the worst things you can do. I don't know where people get the idea that running the battery out of a device is a miracle cure, but it's ridiculous.
First, use the "Mount" function that comes with TWRP and mount your sdcard. Choose a ROM and transfer it to your sdcard to be flashed in TWRP. Once you have a ROM installed, select Reboot > Reboot System.
If you want the stock based software, install MoDaCo. No need to root or install Google Play Store.
soupmagnet said:
Letting your battery run out would be one of the worst things you can do. I don't know where people get the idea that running the battery out of a device is a miracle cure, but it's ridiculous.
First, use the "Mount" function that comes with TWRP and mount your sdcard. Choose a ROM and transfer it to your sdcard to be flashed in TWRP. Once you have a ROM installed, select Reboot > Reboot System.
If you want the stock based software, install MoDaCo. No need to root or install Google Play Store.
Click to expand...
Click to collapse
Mount function not working either. I hit the button and never shows up on my comp as a storage device.
Yep, that's a problem. In order to fix it, you'll need the command line. To use the command line, you can either fix the Windows driver problem that is causing the "adb offline" error, which could be a very painful process, or set up a LiveUSB to run Linux (recommended).
soupmagnet said:
Yep, that's a problem. In order to fix it, you'll need the command line. To use the command line, you can either fix the Windows driver problem that is causing the "adb offline" error, which could be a very painful process, or set up a LiveUSB to run Linux (recommended).
Click to expand...
Click to collapse
Could I just remove and reinstall the driver? Weird thing is that its still showing up on the device manager Adroid ADB interface.
In a perfect world, yes, that would work every single time.
soupmagnet said:
In a perfect world, yes, that would work every single time.
Click to expand...
Click to collapse
Well i managed to get the driver working and got to flash the latest update from amazon on and renamed it update.zip to get it to flash. Now it seems like its in a bootloop just showing kindle fire in the orange letters. Connecting it to KFU it shows ADB status: online , but still showing bootstatus as unknown.
You need to fix your drivers again.
Now i cant get into anything other than the kindle fire screen. I just made a Factory cable but not sure as to what that is supposed to do as i dont notice anything different when i plug it in other than it powers up by itself instead of having to press the power button. I cant get into twrp anymore. Trying a few other things i keep getting a - exec '/system/bin/sh' failed: No such file or directory (2) error message.
neemo6 said:
Now i cant get into anything other than the kindle fire screen. I just made a Factory cable but not sure as to what that is supposed to do as i dont notice anything different when i plug it in other than it powers up by itself instead of having to press the power button. I cant get into twrp anymore. Trying a few other things i keep getting a - exec '/system/bin/sh' failed: No such file or directory (2) error message.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1668159
kinfauns said:
http://forum.xda-developers.com/showthread.php?t=1668159
Click to expand...
Click to collapse
Thanks kinfauns great info!
Well even though im in fastboot im still getting nowhere. Im trying to use this adb command
fastboot -i 0x1949 flash recovery C:\kfu\software\openrecovery-twrp-2.2.2.1-blaze.img
To try and flash twrp and get an error cannot load C:\kfu\software ' message.
Also when trying this command
adb shell su -c 'idme bootmode 4002'
I get device cannot be found message even though Device manager showing up w/ Android Phone ADB Interface
neemo6 said:
Well even though im in fastboot im still getting nowhere. Im trying to use this adb command
fastboot -i 0x1949 flash recovery C:\kfu\software\openrecovery-twrp-2.2.2.1-blaze.img
To try and flash twrp and get an error cannot load C:\kfu\software ' message.
Also when trying this command
adb shell su -c 'idme bootmode 4002'
I get device cannot be found message even though Device manager showing up w/ Android Phone ADB Interface
Click to expand...
Click to collapse
You're in fastboot so adb commands won't work. You can only use fastboot commands in fastboot mode. As for installing TWRP, go to the TWRP website and download the actual TWRP.img file. The file that comes with KFU is nothing more than a broken link (2kb I think?) and it doesn't work. Put the file you downloaded into your KFU folder and rename it twrp.img, just to make things easier. Then "Shift" + "right-click" on the folder containing the newly downloaded twrp.img and select "Open command window here". In the window that opens up enter the following commands:
fastboot -i 0x1949 flash recovery twrp.img
fastboot -i 0x1949 oem idme bootmode 5001
then hold the power button until the device shuts off and start it up again. It will then boot into recovery.
soupmagnet said:
You're in fastboot so adb commands won't work. You can only use fastboot commands in fastboot mode. As for installing TWRP, go to the TWRP website and download the actual TWRP.img file. The file that comes with KFU is nothing more than a broken link (2kb I think?) and it doesn't work. Put the file you downloaded into your KFU folder and rename it twrp.img, just to make things easier. Then "Shift" + "right-click" on the folder containing the newly downloaded twrp.img and select "Open command window here". In the window that opens up enter the following commands:
fastboot -i 0x1949 flash recovery twrp.img
fastboot -i 0x1949 oem idme bootmode 5001
then hold the power button until the device shuts off and start it up again. It will then boot into recovery.
Click to expand...
Click to collapse
Awesome thanks for the help Soupmangnet!! I got it in twrp recovery now. I would like to just have it back to stock at this point and have the latest update downloaded from amazon on the sd card. Im just worried that this will put me back into the same problem as before. Do need to download or fix something else?
Make sure you change the file's extension to .zip as before, and above all else, wipe System and "Factory Reset". Everything should go well for you.
You sir are awesome! Everything works great! Now to get play store.
You could have simply just flashed modaco instead of going through all he hassle of flashing update.zip and wiping out fff and twrp...
Hi! I want to update my girlfriend's GNex by pushing update via recovery. I have adb working and recognizing device when it's turned on (with debugging mode). But when I go to recovery (adb reboot recovery), I can't get my device recognized again - "adb devices" shows nothing. I figured it can't be problem with drivers (since the device is recognized when turned on?), I must be doing something else wrong? But I have no idea where to look.
Sorry for the (probably) common question, but all I've found (using search) is adb not recognizing devices at all. I've been only using "fastboot" commands so far, and I never had problems with recognizing.
Joplisan said:
Hi! I want to update my girlfriend's GNex by pushing update via recovery. I have adb working and recognizing device when it's turned on (with debugging mode). But when I go to recovery (adb reboot recovery), I can't get my device recognized again - "adb devices" shows nothing. I figured it can't be problem with drivers (since the device is recognized when turned on?), I must be doing something else wrong? But I have no idea where to look.
Sorry for the (probably) common question, but all I've found (using search) is adb not recognizing devices at all. I've been only using "fastboot" commands so far, and I never had problems with recognizing.
Click to expand...
Click to collapse
what recovery are you using? in twrp, in advanced menu, theres a adb sideload option.
The problem is that her phone is locked, everything is stock. The only option is adb sideload (as far as I know). Any suggestions? I really don't have a clue.
Sent from my Galaxy Nexus using my thumbs.
Stock recovery does not offer the ADB interface, so adb commands will not work. You need to flash a custom recovery such as CWM or TWRP.
Ahhh, I didn't know that. I guess I have to wait for the ota, then, since I can't flash or use custom recovery. Thank you for your help!
Sent from my Galaxy Nexus using my thumbs.
Actually you can use adb commands in stock recovery - this works on build number JRN84D and newer only (JRN84D corresponds to 4.1, the first Jelly Bean build).
1) Reboot your device into the stock recovery (i.e., the screen with the Android on its back with the "!");
2) Access the stock recovery menu by pressing power and volume up;
3) Select "Apply update from ADB";
4) Download the correct update for your build and place it in the same directory as your ADB binary;
5) Open a command prompt in the same directory as your ADB binary;
6) Type adb devices to make sure that your device is recognized;
7) Type adb sideload name-of-file.zip
8) Reboot. Done.
Click to expand...
Click to collapse
This is from Method 4 in http://forum.xda-developers.com/showthread.php?t=1419170
Hope this helped
I read the guide and have been browsing the forums for similar situations.
First of all, many months ago I tried to root my KF with something named "doomlord"? I basically googled how to root, picked one, went at it. It ran fine, though I don't recall trying to do anything with the root. Most recently every time I powered it on, I was in the CWMR menu. I tried to install the latest kindle update from amazon (changed it to .zip, placed it in the folder, tried to install from cwmr menu), to get it back to stock. Didn't work, and the only way I was able to use my kindle was wiping everything and rebooting. I became frustrated and started to try anything I hadn't, I clicked fastboot mode. Now it's been stuck at the yellow triangle, does nothing when power is pressed, isn't recognized by my mac.
Many users had my similar situation but I truly am a newbie and went at this with no knowledge, though I do know some terms through the guide. It seems I'm stuck in a bootloop, and my kindle isn't truly broken for good.
What I want to know, in basic terms:
What do I need to download?
To send commands.. do I use terminal? Seems like I need to get 'fastboot' and 'adb'
I've also seen references to getting kindle fire utility- can I use this even though I used some random doomlord program and it's using CWMR?
How to 'flash' something?
Simple, step by step instructions would be SO APPRECIATED! I apologize for having a question everyone else has asked, but I feel so frustrated at this point.
Anybody?
So far, I have downloaded KFU, adb, fastboot, and FFF 1.2.
I've tried many commands to see if my kindle is in fastboot, it does not seem to be. All commands come back with "-bash: fastboot: command not found". I also am going into the directory of "android" where I put adb and fastboot. I think that is correct.
Not sure what to do with KFU, or FFF that I've downloaded.
Should I wait for the battery to drain? Though I don't think that will fix the problem at all.
Kindle still not being recognized by my mac.
At this point I will just pay somebody to help me successfully fix this or send it out. But if it's as easy as the solutions make it seem, I'd love to just do it myself. I think I'm just confused about what exact steps I need to make, whether that is flashing FFF or TWRP?
Whatever you do, don't let the battery drain.
Make sure you have your driver installed and configured correctly:
Code:
cat ~/.android/adb_usb.ini
The only acceptable output is "0x1949".
Next, try to take advantage of the temporary fastboot mode that comes with FireFireFire (yellow triangle).
Hold the power button to shut the device down and enter the following:
Code:
fastboot getvar product
Restart the KF when you see "waiting for device".
Give it a second to boot and you should get an output of "kindle" in the terminal. If you do, repeat the previous step with the following commands:
Code:
fastboot oem idme bootmode 5001
fastboot reboot
That should boot you into recovery again. (but you're not quite finished yet, we'll see if you can get this far first)
If that doesn't work, you should get a Linux LiveUSB (if you have a PC to use) or a VM (only Parallels will work with fastboot) to run Linux, and install and run Firekit. Depending on your Mac, it is possible, albeit very tricky, to get it to boot to a LiveUSB...but I wouldn't count on it. You might need to use the shorting trick to temporarily put the device in USBboot so Firekit can install a new bootloader (see Firekit thread).
soupmagnet said:
Whatever you do, don't let the battery drain.
Make sure you have your driver installed and configured correctly:
Code:
cat ~/.android/adb_usb.ini
The only acceptable output is "0x1949".
Next, try to take advantage of the temporary fastboot mode that comes with FireFireFire (yellow triangle).
Hold the power button to shut the device down and enter the following:
Code:
fastboot getvar product
Restart the KF when you see "waiting for device".
Give it a second to boot and you should get an output of "kindle" in the terminal. If you do, repeat the previous step with the following commands:
Code:
fastboot oem idme bootmode 5001
fastboot reboot
That should boot you into recovery again. (but you're not quite finished yet, we'll see if you can get this far first)
If that doesn't work, you should get a Linux LiveUSB (if you have a PC to use) or a VM (only Parallels will work with fastboot) to run Linux, and install and run Firekit. Depending on your Mac, it is possible, albeit very tricky, to get it to boot to a LiveUSB...but I wouldn't count on it. You might need to use the shorting trick to temporarily put the device in USBboot so Firekit can install a new bootloader (see Firekit thread).
Click to expand...
Click to collapse
Thanks so much for trying to help out. No dice, though. Your directions seem fairly simple and straightforward. I'll tell you what I did step by step-
First I connected KF to my mac, the yellow triangle appears. I go into the directory where adb is. I'm not sure what you meant by which drivers should be installed properly, but I put in the following into terminal:
Code:
cat ~/.android/adb_usb.ini
As a result I got:
Code:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x1949
This seems about right. I shut it down, and tried to input "fastboot getvar product". That is when I get the "-bash: fastboot: command not found". I feel really dumb right now. It really seems so simple but I'm just not getting it. I added a screenshot if that would give you any clue as to why even the first step isn't working. Thank you
2hellwu said:
Thanks so much for trying to help out. No dice, though. Your directions seem fairly simple and straightforward. I'll tell you what I did step by step-
First I connected KF to my mac, the yellow triangle appears. I go into the directory where adb is. I'm not sure what you meant by which drivers should be installed properly, but I put in the following into terminal:
Code:
cat ~/.android/adb_usb.ini
As a result I got:
Code:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x1949
This seems about right. I shut it down, and tried to input "fastboot getvar product". That is when I get the "-bash: fastboot: command not found". I feel really dumb right now. It really seems so simple but I'm just not getting it. I added a screenshot if that would give you any clue as to why even the first step isn't working. Thank you
Click to expand...
Click to collapse
Put the fastboot binary in your home folder and enter 'cd' (without quotes). Then run the commands.
soupmagnet said:
Put the fastboot binary in your home folder and enter 'cd' (without quotes). Then run the commands.
Click to expand...
Click to collapse
I am probably making this harder than it really is. Alright, both adb and fastboot now exist inside my home folder "/user/Lianna/"
Started with kindle on and plugged in, entered "cd" into terminal. Didn't do anything. Continued with "cat ~/.android/adb_usb.ini" got same response as before. Other commands were unrecognized/"not found".
2hellwu said:
I am probably making this harder than it really is. Alright, both adb and fastboot now exist inside my home folder "/user/Lianna/"
Started with kindle on and plugged in, entered "cd" into terminal. Didn't do anything. Continued with "cat ~/.android/adb_usb.ini" got same response as before. Other commands were unrecognized/"not found".
Click to expand...
Click to collapse
Ok try this:
Instead of typing the word "fastboot" into the terminal, drag fastboot into the terminal window and then type in the rest of the command.
[EDIT:] I almost forgot...you're not using fastboot from KFU are you? You need fastboot for Mac.
soupmagnet said:
Ok try this:
Instead of typing the word "fastboot" into the terminal, drag fastboot into the terminal window and then type in the rest of the command.
[EDIT:] I almost forgot...you're not using fastboot from KFU are you? You need fastboot for Mac.
Click to expand...
Click to collapse
Again, command not found. Does the first step indicate that my fastboot is indeed functional?
2hellwu said:
Again, command not found. Does the first step indicate that my fastboot is indeed functional?
Click to expand...
Click to collapse
Are you using the fastboot.exe from the KFU folder or a Mac specific fastboot binary?
soupmagnet said:
Are you using the fastboot.exe from the KFU folder or a Mac specific fastboot binary?
Click to expand...
Click to collapse
I used the two individual downloads for adb and fastboot from here: http://forum.xda-developers.com/showthread.php?t=1917237
I do have KFU in my downloads but I'm not using the fastboot.exe that comes with it. I am using the ones downloaded from above, which seems to be a "unix executable file". I'll show what happens when I open it.
2hellwu said:
I used the two individual downloads for adb and fastboot from here: http://forum.xda-developers.com/showthread.php?t=1917237
I do have KFU in my downloads but I'm not using the fastboot.exe that comes with it. I am using the ones downloaded from above, which seems to be a "unix executable file". I'll show what happens when I open it.
Click to expand...
Click to collapse
Ok let's simplify this. Put fastboot on your desktop and enter the following:
Code:
~/Desktop/fastboot getvar product
soupmagnet said:
Ok let's simplify this. Put fastboot on your desktop and enter the following:
Code:
~/Desktop/fastboot getvar product
Click to expand...
Click to collapse
That did get me the <waiting for device> product:kindle! I then restarted and tried to input
Code:
fastboot oem idme bootmode 5001
fastboot reboot
which again, got "-bash: fastboot: command not found"
2hellwu said:
That did get me the <waiting for device> product:kindle! I then restarted and tried to input
Code:
fastboot oem idme bootmode 5001
fastboot reboot
which again, got "-bash: fastboot: command not found"
Click to expand...
Click to collapse
LOL, pay attention now...
Code:
~/Desktop/fastboot oem idme bootmode 5001
~/Desktop/fastboot reboot
OR
Code:
cd ~/Desktop
fastboot oem idme bootmode 5001
fastboot reboot
...you follow?
soupmagnet said:
LOL, pay attention now...
Code:
~/Desktop/fastboot oem idme bootmode 5001
~/Desktop/fastboot reboot
OR
Code:
cd ~/Desktop
fastboot oem idme bootmode 5001
fastboot reboot
...you follow?
Click to expand...
Click to collapse
ah yes. so, that worked. now at:
Code:
< waiting for device >
~/Desktop/fastboot reboot
at this point KF is still off. power on or no?
Ok, KF is on and back in recovery mode. "CWM-based recovery v5.0.2.7" I have the menu of reboot, install zip from sdcard, etc
2hellwu said:
Ok, KF is on and back in recovery mode. "CWM-based recovery v5.0.2.7" I have the menu of reboot, install zip from sdcard, etc
Click to expand...
Click to collapse
Okay, first you need to find and download the ROM of your choice. You'll also need to download recovery flashable versions of TWRP and FFF, found HERE and HERE.
With those three things downloaded, boot into recovery and find the "Mount" or "Mount to USB" option. I haven't used CWM in quite a while so I couldn't tell you exactly how to get to it. Look around and you will find it. What that does is mounts your sdcard to USB as if it were a USB flash drive. Do that and transfer the three files you downloaded earlier to your sdcard.
With them on your sdcard, install both FFF and TWRP. CWM is way outdated and will not work anymore...Use TWRP instead. You can update to COTR later if you choose as it has a nearly identical look and feel as CWM. The new version of FFF will give you an option at the boot logo to change bootmodes on the fly (makes entering recovery much easier).
With FFF and TWRP installed reboot the device. As the device is booting you will see the Kindle Fire logo in blue instead of orange. When you see it, hold the power button until the boot options appear at the bottom of the screen. Select Recovery.
When TWRP boots up, select "Wipe" then wipe system and factory reset (this step is very important).
Afterwards, select Install, navigate to your sdcard and select the ROM you downloaded then swipe the arrow at the bottom. Select reboot system and you should be all set.
One more thing to note: If the device keeps booting into recovery after subsequent reboots, select "reset boot mode" in the FFF boot options.
Good luck.
soupmagnet said:
Okay, first you need to find and download the ROM of your choice. You'll also need to download recovery flashable versions of TWRP and FFF, found HERE and HERE.
With those three things downloaded, boot into recovery and find the "Mount" or "Mount to USB" option. I haven't used CWM in quite a while so I couldn't tell you exactly how to get to it. Look around and you will find it. What that does is mounts your sdcard to USB as if it were a USB flash drive. Do that and transfer the three files you downloaded earlier to your sdcard.
With them on your sdcard, install both FFF and TWRP. CWM is way outdated and will not work anymore...Use TWRP instead. You can update to COTR later if you choose as it has a nearly identical look and feel as CWM. The new version of FFF will give you an option at the boot logo to change bootmodes on the fly (makes entering recovery much easier).
With FFF and TWRP installed reboot the device. As the device is booting you will see the Kindle Fire logo in blue instead of orange. When you see it, hold the power button until the boot options appear at the bottom of the screen. Select Recovery.
When TWRP boots up, select "Wipe" then wipe system and factory reset (this step is very important).
Afterwards, select Install, navigate to your sdcard and select the ROM you downloaded then swipe the arrow at the bottom. Select reboot system and you should be all set.
One more thing to note: If the device keeps booting into recovery after subsequent reboots, select "reset boot mode" in the FFF boot options.
Good luck.
Click to expand...
Click to collapse
Before I start this- I should have clarified my main goal is to get my kindle back to stock. I don't have a need for anything extra, I really just use it to read books. From other guides, maybe it seems that my next steps should be to download the kindle update from amazon, and flash that?
In that case, download the update from Amazon, change the ".bin" to ".zip" and use that in place of your ROM. All other instructions will be the same...especially when it comes to wiping
"That's a special kind of stupid. The kind that makes me laugh"
soupmagnet said:
In that case, download the update from Amazon, change the ".bin" to ".zip" and use that in place of your ROM. All other instructions will be the same...especially when it comes to wiping
"That's a special kind of stupid. The kind that makes me laugh"
Click to expand...
Click to collapse
Ok I feel stupid, but how do I find where the sdcard folder is? Is it simply just dragging the update to "Kindle" or should I be putting it into a specific folder
2hellwu said:
Ok I feel stupid, but how do I find where the sdcard folder is? Is it simply just dragging the update to "Kindle" or should I be putting it into a specific folder
Click to expand...
Click to collapse
Yes, the mounted volume "Kindle" is your sdcard. Just drag and drop everything into that folder. Be sure to eject the volume from your computer (right-click on it and select eject) before you unmount it in TWRP.
"That's a special kind of stupid. The kind that makes me laugh."
I accidently erased everything from the KF2, all I have on it now is the recovery.
How can I get a rom back on the device?
When I plugged it in the computer under Device Manager it says Portable Devices >> F:/
When I go to my computer to try to enter f:/ its inaccessible.
How can I fix this?
Thanks!
Same issue here. Understood the instruction to wipe everything before installing ROM to mean "System" and "Internal Storage" as well. Now the downloaded ROM and "gapps" zip files are gone...
Found something called "ADB Sideload" in TWRP, could that help?
Like the OP, would appreciate some help. Kindle is a brick for now...
chipsndukes
Back Up & Running
First You need a Fastboot Cable.
Run The Recovery Tool. (Options 1 then 2)
When its completed unplug the Fastboot Cable and press and hold the power button until the KF2 turns off.
Turn it back on and you are all set to Root it!
Rooting
[ONE-CLICK] Automated Freedom-Boot and TWRP installer
OK, thanks LEGEND94, that helped !
Only difference to above: did not use a Fastboot cable to get into fastboot mode, rather fmkilo's technique here: http://forum.xda-developers.com/showthread.php?t=2117224
Held off button to shut down and restarted without having to do anything else, did not have to type any command to get out of fastboot mode.
Am restarting root and ROM flashing, hopefully will work this time.
Thanks again,
chipsndukes
chipsndukes said:
OK, thanks LEGEND94, that helped !
Only difference to above: did not use a Fastboot cable to get into fastboot mode, rather fmkilo's technique here: http://forum.xda-developers.com/showthread.php?t=2117224
Held off button to shut down and restarted without having to do anything else, did not have to type any command to get out of fastboot mode.
Am restarting root and ROM flashing, hopefully will work this time.
Thanks again,
chipsndukes
Click to expand...
Click to collapse
even though legend was OP, his method was a bit overkill, but totally fine.
Once you have recovery, or even the bootloader, you should NEVER need to restore. From the bootloader you can get into fastboot now, and from fastboot you can get the recovery.
As for putting files on, I'm not sure. I could look it up but you both got your issues solved. If someone coming here does need the help, PM me and I can look it up, but from what i remember on other android devices, usually the recovery somewhere has an option to mount USB like a storage device (probably bad wording there) but basically just like when you "turn on usb storage" in the android OS.
I am ASSUMING TWRP has something similar, and if I'm wrong, I'm sure you can always ADB to push the files onto the device from your PC in fastboot mode.
iytrix said:
even though legend was OP, his method was a bit overkill, but totally fine.
Once you have recovery, or even the bootloader, you should NEVER need to restore. From the bootloader you can get into fastboot now, and from fastboot you can get the recovery.
As for putting files on, I'm not sure. I could look it up but you both got your issues solved. If someone coming here does need the help, PM me and I can look it up, but from what i remember on other android devices, usually the recovery somewhere has an option to mount USB like a storage device (probably bad wording there) but basically just like when you "turn on usb storage" in the android OS.
I am ASSUMING TWRP has something similar, and if I'm wrong, I'm sure you can always ADB to push the files onto the device from your PC in fastboot mode.
Click to expand...
Click to collapse
Unfortunately usb Mount doesn't work in the kf2 twrp. I would love the option.
You CAN adb sideload from twrp though.
--
Sent from my Kindle Fire 2, CM 10.1
What I did above is the easiest way, the sideload didn't even work!
chipsndukes said:
Held off button to shut down and restarted without having to do anything else, did not have to type any command to get out of fastboot mode.
Click to expand...
Click to collapse
One change to the above statement. I did have to get out of fastboot mode, but it was confusing how because the terminal emulator was now gone.
I did this instead via a command window with the Fire plugged into the computer. I sent the "fastboot -i0x1949 oem idme bootmode 1" command while in the root directory for the KF2_SRT_10.2.3 restore package, there is a fastboot.exe file there.
Hope that helps.
chipsndukes
Oh dear, am a noob, please forgive me!!
I have a Kindle Fire HD 8.9, rooted it OK, then followed "Installing Kindle Fire HD 8.9" 2nd-Bootloader + TWRP Complete Tutorial" to install TWRP.
Everything seemed ok, then got stuck on blue/white logo, so got into TWRP hoping somehow I could move a rom on there to flash it. Now I'm in TWRP , the Kindle won't show up on My Computer, so how do I do this? I did try pressing "mount" but nothing happened.
I've searched forums but am just getting more confused!!
Maybe the drivers are wrong, but I don't know how to fix that.
Tried looking at "[HOW-TO] ADB Push a ROM to your phone"http://forum.xda-developers.com/showthread.php?t=1667929, it tells me to find where my ADB is on my PC's hard drive, but I can't find anything that says AndroidSDK on my c:drive.
Oh God!! Am I doomed???
Please can someone kind help me??
Thanks guys
6. Wiped /sdcard, can't reboot from recovery: You thought you had the ROM file on the sdcard, but you didn't, and wiped everything, so without a ROM image, you can't boot into system.
Solution: Put the ROM file where your ADB binary is (usually inside platform-tools folder in Android SDK directory) and rename it rom.zip. On the device, boot into TWRP, select Advanced, then ADB Sideload. Connect device to PC. From here, run "adb" and hit Enter to check for your binary version, if it's anything lower than 1.0.3.0, you need to update the binaries by re-installing the latest Android SDK. Once the device is in sideloading mode and is connected to the PC, type "adb sideload rom.zip" and hit Enter. Now you'll find the ROM on the sdcard, flash, and you're done.
http://forum.xda-developers.com/showthread.php?t=2277105
mfg
German JPL
Thank you German JPL,
I did try to follow this trobleshooting bit at the end, but I'm kinda stumped by the fact I don't know where this "ADB binary is (usually inside platform-tools folder in Android SDK directory)"
I'm on Windows 7 and there's no such thing on my c:drive. Under User, there is an ".android" folder, but I don't think that's it.
Hi pixie67,
sorry for my bad english, I'm a German speaking English writer.
in what way do you have adb drivers and fastboot drivers installed?
when did you proceed to the manual, you would still have a folder with android sdk?
===== 5. What is Android SDK, ADB, and Fastboot? =====
Android SDK is a package with the tools for an Android developer to modify devices and collect data to help them create builds and maintain a device. Included in the package is what we commonly use around here in the development world, called ADB (Android Debug Bridge) and Fastboot. ADB allows a computer to communicate with a device by means of a USB cable, allowing a developer to push and pull data between the two devices, and this is the way some root methods are discovered.
Fastboot is the term we use to refer to a diagnostic tool built into Android. This is because fastboot is the first thing a developer turns to when their device is bricked. Factory cables are designed to power the devices into fastboot, and that's all they're really good for. While ADB is for communication between two devices, pushing and pulling data, fastboot is all about writing data into the partitions on a device. We call this process "flashing". This is only for the 7 version of the device, the 8.9 version does not require the factory cable.
Generally, ADB commands in command prompts start with "adb" (i.e. "adb reboot bootloader" which commands a typical Android device to boot into bootloader mode, another name for fastboot mode). ADB commands can only be used when both devices are fully booted up, and ADB debugging is selected on the Android device. After the device boots into fastboot, the device no longer recognizes ADB commands, only fastboot commands. Likewise, in fastboot mode, commands begin with "fastboot" (i.e. "fastboot oem unlock" which unlocks the bootloader on many Android devices). While in fastboot mode, the only safe way to exit is by typing "fastboot reboot" although the usual power button will be fine for most cases.
On the Kindle Fire HD 7" and 8.9", you will notice that the fastboot commands look something like this: "fastboot -i 0x1949 flash boot boot.img" ("flash" is the command to flash a file, "boot" is the partition to flash the file into, and "boot.img" is the image file containing the booting information). The reason why there's a "-i 0x1949" is simply because of the locked-down bootloader. After we install the 2nd-bootloader, this part commands the device to flash the files into the stock bootloader, because the 2nd-bootloader doesn't accept fastboot commands.
To install the Android SDK and be able to use ADB + fastboot, go to this link: Android SDK. After you hit download, just be patient, and you will need a video reference to help set up the package properly, so click here: Video on Installation of Android SDK. To check if it installed properly, once you're done with the video, open up a command prompt (for Windows, hold the Windows key + R, and type cmd, then hit Enter), and type either "adb" or "fastboot" and hit Enter. For both cases, you should get a block of text that tells you what each command does.
To check if your device can work with ADB, enable ADB on the device (may be called USB debugging), and connect it to the computer. If there are any drivers installing, let them finish. Then, on the command prompt, type "adb devices" and hit Enter. If your ADB drivers work, you should see a line of letters and characters. Same thing with fastboot. Always do this check before you start messing around to make sure your devices are receiving the commands.
Click to expand...
Click to collapse
I have windows 7 and when I enter in the search window windows sdk, I find the folder.
mfg
GermanJPL
Hello,
I installed KindleADB.exe for the drivers. That seemed successful. I managed to root it ok,
My Kindle, in TWRP shows up in device manager as Android Phone/Android ADB interface.
I can boot into fastboot from the options in TWRP.
I've updated the android SDK package and rebooted my computer.
I can't use ADB sideload, it just sticks on "starting ADB sideload feature...."
If I reboot to system, I just end up on the white/blue logo.
I don't know what to do next
I do not understand ... have you thought you were the instructions?
you've got installed 2nd Boot Loader & TRWP after manual with ADB and fastboot .... ? why are you not looking adb.exe, then you have your folder
or you install you Andrid sdk subsequently follow the instructions, then you've got everything you need.
German JPL
I don't really understand your answer German, I've followed the instructions, but I'm still stuck on the boot screen, or in TWRP with no way to flash a ROM as there is no ROM on the device and I can't transfer a rom onto the device because mounting doesn't work and Adb sideload doesn't work.
So I'm stuck.
Help!
You have written the sideload does not work because the can not find the sdk folder. Did you find it now and sideload does not work?
Before you experiment still around for hours, start your Kindle in fastboot and play the 3 img a backup folder.
After that you start from scratch and copy before the Rome and gapps on the Kindle.
German JPL
GermanJPL said:
You have written the sideload does not work because the can not find the sdk folder. Did you find it now and sideload does not work?
Before you experiment still around for hours, start your Kindle in fastboot and play the 3 img a backup folder.
After that you start from scratch and copy before the Rome and gapps on the Kindle.
German JPL
Click to expand...
Click to collapse
I can't find a SDK folder anywhere, I've searched, I've enabled hidden folders. I don't know if this is why the ADB sideload option doesn't work, but it doesn't, it just hangs there.
I can start the Kindle in fastboot, there is a message saying "installing device driver software", then another, confirming the ADB driver software has been successfully installed. In device manager I now see
Kindle Fire listed with android adb interface.
I don't know what "play the 3 img a backup folder." means. I'm sorry. While I'm in fastboot mode, I'm not sure what to do. Can you tell me?
And I don't know how to start from scratch as I can't copy anything anywhere. Although I can see the Kindle in device manager, I can't get to it in windows explorer.
The problem is, I didn't copy the ROM and GAPPS onto the Kindle before installing TWRP and now I can't.
Oh dear, I'm sorry to be so frustrating!! Thank you for trying to help though xx
Step 2: Grabbing Files and Backing Up
Once you're rooted successfully, you need to grab the files we'll need for the installation. Go to Hashcode's thread: Kindle Fire 2nd-bootloader + TWRP for the Kindle Fire HD 8.9. Download ONLY two files: the TWRP recovery image, and the freedom-boot image. That's all, and transfer both of those to the root of the sdcard, now you can move on to Step 3: Installation if you wish to skip backing up.
I will go through the steps to backup. Remember that it is not mandatory that you do this; should you follow the guide very closely, you do not require backing up whatsoever. This just serves as an extraneous step for those who feel comfortable working with ADB and would like to participate in modding the device, in which case these files would come in handy in case the device is bricked. Again, it is NOT mandatory.
Connect the device to the computer through a normal USB cable, turn on ADB through settings. Open up the command prompt (CMD) on your computer: hold down the Windows key, and press R. This will open up Run, type "cmd" and hit Enter. Now, enter the following lines of code one-by-one, wait for a line to finish before going to the next one.
Code:
adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/boot of=/sdcard/stock-boot.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/recovery of=/sdcard/stock-recovery.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/system of=/sdcard/stock-system.img"
mkdir C:\KFHD8Backup
adb pull /sdcard/stock-boot.img/ [C:\KFHD8Backup]
adb pull /sdcard/stock-recovery.img/ [C:\KFHD8Backup]
adb pull /sdcard/stock-system.img/ [C:\KFHD8Backup]
Now open up the Computer folder, and in the C: drive you will find a folder called "KFHD8Backup" with all of those files that you just pulled in there. Once you're at this stage, you have finished backing up. Take that folder and put it somewhere safe, on a USB drive, or an external flash drive.
If you need to flash these to restore the device in case you have bricked it, boot into fastboot mode. Place the folder and the files in it back to the C: drive before attempting to restore (if you know how to use the cd command, feel free to change the location of the files). Once you're in fastboot, start with the first line of code to command CMD to locate the backups folder, then proceed with the second, one-at-a-time:
Code:
cd C:/KFHD8Backup
fastboot -i 0x1949 flash boot stock-boot.img
fastboot -i 0x1949 flash recovery stock-recovery.img
fastboot -i 0x1949 flash system stock-system.img
fastboot -i 0x1949 reboot
+Note: Be patient, as some of the codes take a while due to the amount of data being transferred between the device and your computer. If nothing happens after you hit Enter on a line of code or it just hangs at nothing, close the command prompt, open it up again, and retry. It might seem scary, but if there are no codes being executed in the command prompt (you'll see data transfers with kB/s and such if there's communication), it's safe to unplug the cable or close the command prompt. Feel free to reboot your computer, then plug the cable in and try again.
Also, know that these files, when flashed through fastboot, will revert your device back to the state of when these backups were made, so once you have TWRP, these files are no longer important. The backups you make in TWRP will be just as useful, and can save you both time and patience. If, however, you want to revert to a completely stock Amazon OS software for warranty purposes, or to redo this process for any reason, they will come into play because these backups retain your apps and your settings. Otherwise, use the KFHD System Restore Tool to go completely stock.
After you have backed-up (optional), and you have the two needed files on the sdcard (TWRP image and freedom-boot image, ignore the Amazon OS and the stack override files), you can move on to step three.
Recap:
1. Go to Hashcode's 2nd-bootloader thread
2. Download both the required files and move them to sdcard
3. Use ADB to make backups (optional)
4. Use fastboot to restore the images you backed up if there are issues
Click to expand...
Click to collapse
German JPL
Thank you for helping me.
I can't transfer the 2 files as I can't access the sdcard, but I did do this initially.
Also, do I use the command prompt just from the desktop and will it work while I'm in fastboot mode as I can only get into fastboot or recovery. I can't boot normally.
I will give it a go anyway, I really am very grateful for your help
Well, I've done it!!
I made sure ADB was properly installed, following the video link German helped with. Had to make my own android-sdk folder on the C:\ drive. Put KFFirstAide100 and KFHD_SRT_v2.1 downloaded from here in the "platform-tools" folder, ran KFHD_SRT_v2.1 tool to get into fastboot (turn Kindle off first, press option 1, then n, then connect kindle to computer via cable. It will go into fastboot.
Then Go to Firstaide in fastboot mode and restore kindle via one of the options on there.
Now I'm up and running again. Yey!!
Thank you German for all your help!!:highfive:
HELP
pixie67 said:
Well, I've done it!!
I made sure ADB was properly installed, following the video link German helped with. Had to make my own android-sdk folder on the C:\ drive. Put KFFirstAide100 and KFHD_SRT_v2.1 downloaded from here in the "platform-tools" folder, ran KFHD_SRT_v2.1 tool to get into fastboot (turn Kindle off first, press option 1, then n, then connect kindle to computer via cable. It will go into fastboot.
Then Go to Firstaide in fastboot mode and restore kindle via one of the options on there.
Now I'm up and running again. Yey!!
Thank you German for all your help!!:highfive:
Click to expand...
Click to collapse
I dont get how you fixed it i am a noob can you please send me everything i need to download and how to do it? I really need to get my kindle back so i can put my cm rom on it please!
OhhRey said:
I dont get how you fixed it i am a noob can you please send me everything i need to download and how to do it? I really need to get my kindle back so i can put my cm rom on it please!
Click to expand...
Click to collapse
This should do the trick(assuming you just want to push a rom onto your device), drivers are always in my signature, adb is in the zip on the tutorial i wrote a while back. Here ya go!
HELP
stunts513 said:
This should do the trick(assuming you just want to push a rom onto your device), drivers are always in my signature, adb is in the zip on the tutorial i wrote a while back. Here ya go!
Click to expand...
Click to collapse
Good news and bad news, i installed the gapps and cm but it is stuck on the cyanogenmod screen and keeps looping. Please help! I thought i was done so close to a new android device! HELP!
OhhRey said:
Good news and bad news, i installed the gapps and cm but it is stuck on the cyanogenmod screen and keeps looping. Please help! I thought i was done so close to a new android device! HELP!
Click to expand...
Click to collapse
Do a factory reset from twrp and see if it fixes the problem.