I was on DN3 v 3.1.1, I decided to try kitkat so I installed omnirom 4.4.2 but when I tried to Go back to DN3 v3.1 gohan rom I faced one problem, no matter what I did wifi was not working, tried every BL patch but no success, Pls anybody help me:crying:
Did you flash devil2 kernel?
Sent from my GT-N7105 using xda app-developers app
thedadio said:
Did you flash devil2 kernel?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
No I didn't flash any kernal, should I?
Related
I have cooked my own ROM yesterday, everythings working awsome until i found that i have Wifi problem
I have tried to flash the module again and again but it can help
I NEED A SOLUTION FOR THIS PROBLEM
I flashed boot.img from a little different ROM. It helped.. only wifi problem
Sent from my Xperia Pro using xda app-developers app
Drupry said:
I flashed boot.img from a little different ROM. It helped.. only wifi problem
Sent from my Xperia Pro using xda app-developers app
Click to expand...
Click to collapse
I have try it but didn't help
Sent from my LT18i using Tapatalk 2
CarrotAk23 said:
I have try it but didn't help
Click to expand...
Click to collapse
You have to install modules(drivers) for kernel you are using.
Or if you are using Stock kernel,and using Costum ROM,then you will find on ROM's site modules for wifi fix.Good luck
Sent from my LT18i using Tapatalk 2
Sr problem solved
Just use my own custom kernel )
Sent from my LT18i using Tapatalk 2
Hi to everyone,
I've recently installed the nightly CM 10.2 on my Galaxy Note 2 LTE (N7105 - t0lte) but I have a couple questions about the kernels.
I'm thinking about flashing a custom kernel like the NEAK on my device and here my doubs:
-) I found 2 version of the NEAK kernel pakage; the 2.1x CM10.1 & Derivates Zip and Tar. So which one is the appropriete for my device?
-) And the "CM10.1" means that is not yet compatible with the new 10.2 version of the CynogenMod?
-) Last but not the least, if I flash this or any other custom kernel how can I go back to the STOCK Kernel? I cannot find any backup stock kernel package to flash it back so the stock kernel is only inside the stock ROM?
Thanks a lot for all the help and for the amazing board
Nobody can help me with those noob question?
Please
Sent from my GT-N7105 using xda app-developers app
I'm sorry to keep repeating but I really need some advice to this kernel stuff.
Anyone?
Sent from my GT-N7105 using xda app-developers app
Nobody yet know where I can find the stock kernel of my device?
Sent from my GT-N7105 using xda app-developers app
Use tar I'd you are flashing with Odin/mobile Odin . .zip is for cwm/twrp etc
Sent from my GT-N7105 using xda app-developers app
thedadio said:
Use tar I'd you are flashing with Odin/mobile Odin . .zip is for cwm/twrp etc
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
OK thank you. But if I want to revert back to the stock kernel I have to flash the stock ROM or I can flash even a custom ROM?
Sent from my GT-N7105 using xda app-developers app
Hi guys,
I have problem with my touchscreen. It stopped work after i flashed my phone with THIS kernel. (D-kernel).
I had this stock rom: I8160XXMB2_932015_REV00.
I tryed to reflash it again with this stock rom but it didn't help. Any solutions? Please Help me
Did you flash stock mb2 kernel?
Sent from my GT-I8160 using xda app-developers app
Gakupo said:
Did you flash stock mg2 kernel?
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Sorry, I don't know what you mean now
No he flashed D-Kernel. I would guess that that problem is caused of you outdated stock rom you have mb2 right? That was the first JB leak with many bugs etc. I prefer you to flash a newer stock rom for exemple MG2 or MF1 they are more stable and have fewer bugs.
PepekT said:
Sorry, I don't know what you mean now
Click to expand...
Click to collapse
have you tried to flash stock mb2 kernel?
---------- Post added at 05:04 PM ---------- Previous post was at 04:59 PM ----------
Shadowcareful said:
No he flashed D-Kernel. I would guess that that problem is caused of you outdated stock rom you have mb2 right? That was the first JB leak with many bugs etc. I prefer you to flash a newer stock rom for exemple MG2 or MF1 they are more stable and have fewer bugs.
Click to expand...
Click to collapse
I wrote wrong i asked him if he tried flash back mb2 kernel, but thanks to pointing it out
Sent from my GT-I8160 using xda app-developers app
Shadowcareful said:
No he flashed D-Kernel. I would guess that that problem is caused of you outdated stock rom you have mb2 right? That was the first JB leak with many bugs etc. I prefer you to flash a newer stock rom for exemple MG2 or MF1 they are more stable and have fewer bugs.
Click to expand...
Click to collapse
Yes, I flashed D-kernel and then phone started to be slow and touchscreen stoped working. Then i tryed to flash it again with rom mb2 but it didn't help. Now i tryed it with mg1 and it didn't help again. I also tryed flash these kernels: Kernel_XXMF1.tar Kernel_XXMC8.tar
So, I'll try roms what you told me. Thanks for advice. BTW: Where i can find them please?
Here is all jb firmwares
http://forum.xda-developers.com/showthread.php?t=2340849
Sent from my GT-I8160 using xda app-developers app
Gakupo said:
Here is all jb firmwares
http://forum.xda-developers.com/showthread.php?t=2340849
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Thank you.. I tried MG2 but didn't helped again. Any ideas please?
Did you flash mg2 and still have no touch?
Sent from my GT-I8160 using xda app-developers app
Gakupo said:
Did you flash mg2 and still have no touch?
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Yes, I did. And touchscreen still don't work x(
Have you tried to wipe cache and dalvik cache
Sent from my GT-I8160 using xda app-developers app
Gakupo said:
Have you tried to wipe cache and dalvik cache
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Sure.
Does it still not work?
Sent from my GT-I8160 using xda app-developers app
so when you fresh install mg2 firmware touch screen is not working ? or just on d-kernel?
Yes, I tried all these roms/lkernels.. But nothing work. Finaly i found solution.
Cynogen mod .. now my touchscreen work.. I didn't tried flash other rom yet but important is that touchscreen is finaly working! thanks for every advice. I hope that this thread can help some people.
Seems like cyanogenmod is the solution for many problems yay
Good that it worked out for you!
Sent from my GT-I8160 using xda app-developers app
Same problem
Im having the same problem!
Which kernel did you used for the CM mode that you posted? You just installed the ROM and then it worked?
Thanks in advance
Yes, I just flashed ROM from cwm. Yesterday I flashed new CM mode and touchscreen still working.
Sent from my GT-I8160 using xda app-developers app
stock 4.3 , dr ketans custom rom v6.1 or ditto dn3 rom i when i flash devils kernel i get unknow baseband , even when i reflash the modem plz what to do
Any help????
Sent from my GT-N7100 using xda app-developers app
flash stock rom
Whos thay supposed to help me ?
Sent from my GT-N7100 using xda app-developers app
I reflashed stock kernel and it worked i just wanna know why i cant install custom kernel on 4.3 TW based roms
Sent from my GT-N7100 using xda app-developers app
Every time I flash a ROM to my galaxy note 2 Sgh-t889 . For example cm11 and omni ROM it keeps staying in bootloop so I tried other Roms and its the same problem. I have the new cwm and I wipe/cache/data and it still stays on bootloop so I'm wondering why can't no Roms work on my galaxy note 2? HELP PLEASE
Build number is- cm_toltetmo-userdebug 4.2.2 jdq39e eng-jenkins.20130923.201142 test-keys
Sent from my SGH-T889 using XDA Premium mobile app
Consider giving out some more detail: exact version and build numbers would be a good start.
Does your phone work on stock?
Have you tried using logcat/monitor.bat to get additional information?
Yes it works on stock and works on cyanogenmod 10.1.3, but eveytime I try a new ROM like any ROM it stays stuck on boot loop and I don't know where to check logcat/monitor.bat @Darkshado
Sent from my SGH-T889 using XDA Premium 4 mobile app
Stock, which one? (Exact build) same for CM10, nightly? RC? stable?
What recovery are you using to flash? I've had baseband unknown issues with the 2.6.3.7 t0lte TWRP while flashing OmniROM nightlies (yet CM and PACman 4.2 ROMs were OK) whereas it worked just fine with non-touch CWM 6.0.4.1.
What baseband are you using? It may be a matter of updating that. (I have an "unusual" T889V, so I can't give you much specifics on this topic.)
Logcat and monitor.bat are part of the Android SDK, as is ADB.
I had that once,
I solved by going to recovery mode and doing a "factory data reset".
After that, the rom stopped bootloop.
Did you try to install a different recovery?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Thank you everyone I found the problem ,
Sent from my GT-N7105 using XDA Premium 4 mobile app
JustCreateYou said:
Thank you everyone I found the problem ,
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Care to share so maybe the next person won't have to suffer too
Sent from my SGH-T889 using xda app-developers app
All I did was use Odin again to factory set it again and get the stock ROM and then I rooted it but this time I added ext4 then it worked perfect
Sent from my GT-N7105 using XDA Premium 4 mobile app
I am willing to try this, can you please explain in detail about this ext4?