Develop Bugs

Impossible to connect to 3G or HSDPA, only EDGE

Hello guys!
I'm from Mexico and I just get a flat data plan for my Diamond but there's no way to get a 3G connection and neither HSDPA.
My carrier is Telcel.
I've already tested the following radios:
3, 5, 6, 8, 11, 14 and 18 with no succeed.
I also replaced the SIM Card for the latest version (v.4) and nothing.
I don't know what else I can do.
My brother have a Tilt and he connects to HSDPA easily; comparing the 2 devices the only difference I noticed is that when selecting the WCDMA band on the Tilt makes the connection with no trouble, but if I do the same on the Diamond, it never make the connection to the network.
Does anybody knows what can I do now?
Should I wait for a new Radio or there's no way to conect to HSDPA on my country with the Diamond?
Thanks.

Does your carrier supports 3G?

What 3G band do you carrier use, and which version if diamond did you get? It might be that your carrier use 850/1900mhz 3G band, and you got a Euro version diamond.

Is 3G actually switched on or are you camped to 2g? Check COMM MANAGER and make sure 3G is enabled?

joshyth said:
What 3G band do you carrier use, and which version if diamond did you get? It might be that your carrier use 850/1900mhz 3G band, and you got a Euro version diamond.
Click to expand...
Click to collapse
I think it is 850/1900mhz...

winwiz said:
Is 3G actually switched on or are you camped to 2g? Check COMM MANAGER and make sure 3G is enabled?
Click to expand...
Click to collapse
Enabled.
I refuse to believe my phone is not compatible with the local network

1. You havent told us which phone version you have. US or the original one?
2. If you "refuse to believe" anything, your'e not going to get accurate data, now are you?
jpdediego said:
Enabled.
I refuse to believe my phone is not compatible with the local network
Click to expand...
Click to collapse

DrewVS said:
1. You havent told us which phone version you have. US or the original one?
2. If you "refuse to believe" anything, your'e not going to get accurate data, now are you?
Click to expand...
Click to collapse
LOL
1. I don't know the version of my phone; I bought it in the US but this was before the release for US, so I'm not certain.
Is there any way to verify which version I have?
2. I said I refuse to believe that because of the great programmers that are loose in this forum; they can do practically everything they want if the device is capable; and I'm pretty sure the Diamond is compatible with this network; I'm hoping there will be a Radio version that will activate [email protected]
Thank you for all your post and interest; this is a great community

I forgot where to check this, but do check if your diamond is DIAM100 or DIAM110. If you got DIAM100, then it mean you got the Euro version, so no 3G for you.

Front Camera
More easy, if you have the front camera you have European Version, and not have 3G, the american version not have front camera.
Lamentablemente nos engañan permanentemente, si es cuatribanda en telefonía pero no en 3G- y según los que saben no tiene arreglo porque es un tema de hard.
Suerte
Carlos

calito said:
More easy, if you have the front camera you have European Version, and not have 3G, the american version not have front camera.
Lamentablemente nos engañan permanentemente, si es cuatribanda en telefonía pero no en 3G- y según los que saben no tiene arreglo porque es un tema de hard.
Suerte
Carlos
Click to expand...
Click to collapse
Well, thanks to everybody
Diamond European Version for sale!!!
Anyone???
LOL
Carlos: muchas muchas gracias!

i have Euro version... and 3G... although i am in Europe

3G illusion
Si quieren tener,al menos, la ilusion del 3G instalen en la version europea el ultimo rom NiAX Special Edition by vauss. Marca 3G y consume como si...Una rareza.

marioadrian said:
Si quieren tener,al menos, la ilusion del 3G instalen en la version europea el ultimo rom NiAX Special Edition by vauss. Marca 3G y consume como si...Una rareza.
Click to expand...
Click to collapse
Pero no te conecta a 3G cierto??? Creo que yo tambien voy a vender el mio, digo la verdad me encanta pero es europeo y por lo que veo de plano si es un tema de hardware o al menos no veo que alguien este haciendo un esfuerzo serio para ver como utilizar un Diamond Europen en 3G Americano.

No North America 3G in this version. It is not a software fixable issue. It is much easier to come to the facts when one believes...
jpdediego said:
Well, thanks to everybody
Diamond European Version for sale!!!
Anyone???
LOL
Carlos: muchas muchas gracias!
Click to expand...
Click to collapse

No, no me conecta; al menos no noto diferencia de velocidad.Por algun motivo consume una cantidad enorme de batería y se enciende el icono de 3G en lugar de la E que tengo en los otros roms.

Uno mas al club...
Hola paisano
Yo tambien ya cambie con todas las rom, y checando el foro esperando a que alguien haga el milagro, pero creo que ya valió...
Lo que si, es que de todos modos con el plan ilimitado me sirve bastante bien el cel, y checa mi correo cada 10 minutos, con un uso normal me dura entre uno y dos dias la bateria. Estoy utilizando la version elite 3.0 WWE y radio.05 con buena recepción.
Ahi si se enteran de que alguien hizo lo imposible y hace funcionar la version europea con 3G me chiflan...
Saludos!!!

Screen in american version
The american version have a yellow screen (cremita) and the european is snow white. If you have both in your hands for me the european is better.
http://forum.xda-developers.com/showthread.php?t=411487
Si no usan el 3G la eropea tiene una pantalla muy blanca y la americana es medio triste y le faltan contrastes (tuve las dos en mis manos), por lo tanto analicen bien que quieren, ya que está por salir a la venta la bateria de 1300 original y queda un maquinón. Si son 3g dependientes no tiene arreglo
Carlos

That is not correct; only a few NA units had poor color balance.
calito said:
The american version have a yellow screen (cremita) and the european is snow white. If you have both in your hands for me the european is better.
http://forum.xda-developers.com/showthread.php?t=411487
Si no usan el 3G la eropea tiene una pantalla muy blanca y la americana es medio triste y le faltan contrastes (tuve las dos en mis manos), por lo tanto analicen bien que quieren, ya que está por salir a la venta la bateria de 1300 original y queda un maquinón. Si son 3g dependientes no tiene arreglo
Carlos
Click to expand...
Click to collapse

According to HTC, they told me that the 3G Touch Diamond that has no front camera is the same as the European version. On my phone I show an H, most of the time and E all the other times. Every now and then I will see 3G, but just for a second then ..x...then it picks up E.

i need help I9000T with Claro P.R. no mobile Networl

Hi i am working with sgs I9000T bought and i check it's Root but in the lock screen shows the mobile company from the Sim card (Claro P.R.) when i try to make a call get message Data Network Not available and when i go to settings to search mobile operator show only T-mobile and AT&T NOT Claro P.R. (Puerto Rico) i get the stock Froyo and GB and Flash with Odin do everything and still with same problem can some one help .

harman2 said:
Hi i am working with sgs I9000T bought and i check it's Root but in the lock screen shows the mobile company from the Sim card (Claro P.R.) when i try to make a call get message Data Network Not available and when i go to settings to search mobile operator show only T-mobile and AT&T NOT Claro P.R. (Puerto Rico) i get the stock Froyo and GB and Flash with Odin do everything and still with same problem can some one help .
Click to expand...
Click to collapse
Check APN settings. post it in the Q&A for more answers.

De que compañia es el galaxy? Lo mas seguro no tienes la informacion que va en el efs folder.

Es de Claro pr
Sent from my HTC Vision using xda premium

Is from Claro P.R.
Sent from my Nexus S using XDA Premium App

Read the rules, only English, after that read the rules again.
POST IN THE RIGHT SECTION .
Sent from my GT-I9000 using XDA Premium App

siky_dude said:
Read the rules, only English, after that read the rules again.
POST IN THE RIGHT SECTION .
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Really dude? That wasn't neither helpful nor nice, he needs help and all you can do is bash the "only english" rule?
Yes I know I'm reviving a dead thread but at least I'll try to help.
harman2,There could be as much as infinite possibilities as to what could be wrong with the phone.
Things to check:
1) does it have an IMEI? to check type *#06# on the phone. Sometimes when someone tries to unlock the SGS they accidentally corrupt the file where the IMEI resides. IF it doesn't have an IMEI don't even try to look for a way around it, you have a pretty looking paperweight. So far I haven't found a way to fix this.
2) If the IMEI is there, it's possible the kernel you're using doesn't recognize the Claro signal. You'd have to try and install the STOCK ROM that Claro PR uses for you to get the signal.
3) If everything seems fine then most likely your missing the APN.
Go to: Settings > Wireless and Network > Mobile Networks > Access Point Names
If Claro isn't in the options then hit Menu > Newk APN.
Name: Claro
APN: internet.claropr.com
Menu > Save
This is all I could think off. Hope this helps in some way.
harman2, Aqui puede ser que hayan una infinita cantidad de cosas que pueden estar mal con tu celular.
Cosas a verificar:
1) Tiene IMEI? para verificar ve a telefono y marca *#06#. Si no tiene un IMEI, no trates de buscarle la vuelta, no tiene solucioin, tienes un lindo pisapapeles. Lo que pasa es cuando mucha gente trata de cambiarlos de compañia (desbloquearlos) corrompen un file que es donde se guarda el IMEI. Hasta ahora no he encontrado solucion al problema.
2) Tiene el kernel correcto? Si no tienes el kernel correcto no busques mucho q no va ni a reconocer la señal de Claro. Tendrias que buscar el STOCK ROM de Claro para que intentes reconocer la señal.
3) Tiene el APN? Para verificar ve a Configuracion > Conexiones Inalambricas > Redes Moviles > Nombres de punto de acceso
Si no esta la de claro, dale a menu > nuevo apn
Nombre: Claro
APN: internet.claropr.com
Menu> guardar
Esto es lo basico que se me ocurre que pueda ser. Epero que te haya ayudado en algo.

I don't think that he reads your post as it's an old thread. But maybe a forum moderator comes and moves/deletes the thread(You know there's a new sticky thread?.

I know this thread is old, but as long as it's still open, anyone can post a comment and anyone with the same problem can benefit from other people posts.
That said, Let's go to the topic.
1. Contrary to what most people could think, not having Claro's or any other carrier signal has nothing to do with APN's. APN's are for data/internet use.
2. I had that same problem when testing different Gingerbread Roms long time ago.
3. The no signal issue was caused by the rom's modem. Sometimes they have certain bands/frequencies turned off by default or even worse, not availabe at all. In my case, the phone was detecting T-Mobile only. I had to check the active bands with *#*#2263#*#* and turn on the 850 MHz band which was off. After that everything worked like a charm.
Wilfredo

[Q] Moden 747 vs Moden t999 or t999l

I have a samsung galaxy s3 ATT_I747_UCUEMJB what if I try to just get the modem of T999 s3?
ESPAÑOL: Tengo un galaxy s3 att i747 que pasaria si intento ponerle el moden del t999 tmobile?

The modem from a T-mobile s3 probably won't work with the MJB bootloader.

audit13 said:
The modem from a T-mobile s3 probably won't work with the MJB bootloader.
Click to expand...
Click to collapse
thanks
I want to know if you can break down the cell.
if I can test?
seme not want to damage the cell!!!!!!!
GRACIAS!:good:

No lo dañas sólo q no correría la data ni señal con tan solo instalar el q manda vuelve a funcionar , como único q pase algo es q tengas q flashier lo de nuevo por Odin

[Q] ZL C6506: Access to 4G lte

greetings to all.
Help, I have no access to the 4G LTE network in my country (chile) because my ZL 6506 does not support the 2600 MHz band.
I can flash the FTF 6503 if the band supports 2600 mhz on my 6506 zl?
sorry for my bad inglish
saludos a todos.
ayuda, no tengo acceso a la red 4G LTE en mi país (chile) debido a que mi Zl 6506 no soporta la banda de 2.600 MHz.
puedo flashear el FTF 6503 que si soporta la banda 2.600 mhz en mi zl 6506?

miloasis said:
greetings to all.
Help, I have no access to the 4G LTE network in my country (chile) because my ZL 6506 does not support the 2600 MHz band.
I can flash the FTF 6503 if the band supports 2600 mhz on my 6506 zl?
sorry for my bad inglish
saludos a todos.
ayuda, no tengo acceso a la red 4G LTE en mi país (chile) debido a que mi Zl 6506 no soporta la banda de 2.600 MHz.
puedo flashear el FTF 6503 que si soporta la banda 2.600 mhz en mi zl 6506?
Click to expand...
Click to collapse
I'm not sure, but i think not. Altough since i don't have a 4g plan yet, i haven't search it properly. What i was planning to do, was to wait until the 700 MHz band, and then try to make it works. The only problem is that, as far as i know, it isn't clear yet the exact band class where it will run, because in the 700 mhz spectrum, there are several bands, and the c6506 is not compatible with them all.
Someone correct me if i'm wrong xd.
Saludos!
(me da un poco de lata traducir xd, pero yo estoy esperando a la banda 700 a ver si esa es compatible con el c6506, porque creo que hacer eso no sirve por ser algo de hardware y no de software)

You can flash 6503 baseband. If it not work you can flash back the original baseband.
And in case it not work read this guide to enable LTE band 7
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
On Step 12
12. Go through those devices until you find MI_04 under the second drop down position.
Click to expand...
Click to collapse
Find MI_05 not MI_04
On step 23
23. Go to line 1877, click it and copy the decimal number on the right side of a programme. right click - copy
Click to expand...
Click to collapse
Go to line 6828 change value to 1904863
No need to do other step
Press on write NV and then press on file ->write changed NV to the phone.
Reboot and tada you unlock all LTE band that ZL support

zcop said:
You can flash 6503 baseband. If it not work you can flash back the original baseband.
And in case it not work read this guide to enable LTE band 7
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
On Step 12
Find MI_05 not MI_04
On step 23
Go to line 6828 change value to 1904863
No need to do other step
Press on write NV and then press on file ->write changed NV to the phone.
Reboot and tada you unlock all LTE band that ZL support
Click to expand...
Click to collapse
Thanks friend for the help.
I followed the steps, I choose MI_05 but I can not install the drivers that are in the folder HTC
that I can do?

Dannysbkn said:
I'm not sure, but i think not. Altough since i don't have a 4g plan yet, i haven't search it properly. What i was planning to do, was to wait until the 700 MHz band, and then try to make it works. The only problem is that, as far as i know, it isn't clear yet the exact band class where it will run, because in the 700 mhz spectrum, there are several bands, and the c6506 is not compatible with them all.
Someone correct me if i'm wrong xd.
Saludos!
(me da un poco de lata traducir xd, pero yo estoy esperando a la banda 700 a ver si esa es compatible con el c6506, porque creo que hacer eso no sirve por ser algo de hardware y no de software)
Click to expand...
Click to collapse
compañero, gracias por la respuesta.
tambien habia pensado esperar a que habiliten la banda de 700 mhz pero lei en algunos foros que esa banda se sub-divide en varias bandas, por lo que no es 100% seguro que nuestro c6506 funcione en 4G... esperemos que no sea asi. Estuve probando la liberacion de las bandas del posteo que dejo el otro amigo que me contesto pero no lo pude hacer, es bastante engorroso y no a todos les dio buen resultado.
saludos.

miloasis said:
Thanks friend for the help.
I followed the steps, I choose MI_05 but I can not install the drivers that are in the folder HTC
that I can do?
Click to expand...
Click to collapse
Do you know force install driver??
If not
Right click on MI_05 item > Properties > Update Driver Software > Browse My Computer > Pick driver folder > Next to the end )
If you use win 8 then disable driver signature enforcement before install driver

zcop said:
Do you know force install driver??
If not
Right click on MI_05 item > Properties > Update Driver Software > Browse My Computer > Pick driver folder > Next to the end )
If you use win 8 then disable driver signature enforcement before install driver
Click to expand...
Click to collapse
I could get to step 19 but can not find this anywhere.
19. Navigate to QPST/bin and open RV_NV_Manager.exe
in the ZIP file does not appear, either in the QPST program
WHY???

zcop said:
You can flash 6503 baseband. If it not work you can flash back the original baseband.
And in case it not work read this guide to enable LTE band 7
http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269
On Step 12
Find MI_05 not MI_04
On step 23
Go to line 6828 change value to 1904863
No need to do other step
Press on write NV and then press on file ->write changed NV to the phone.
Reboot and tada you unlock all LTE band that ZL support
Click to expand...
Click to collapse
friend, I was able to step 23, but now is not getting to the line 6828, the list only goes to line 5700.
sending a photo
that I can do?

The c6506 is compatible with the LTE Band Class XVII (700 MHz), and i did read in a forum a while ago, that the new 700 MHz band, wil be the LTE Band Class XLIV, so...maybe the only option we have is (as zcop said): flash the c6503 baseband or directly activate the Band Class VII (2600 MHz) as you are trying to do now.
If i'd have plan, i'd try it, but i don't xD (LTE is not available for prepaid costumers yet)
Bueno dado que no puedo ayudar mucho, solo me queda desearte suerte :V

miloasis said:
friend, I was able to step 23, but now is not getting to the line 6828, the list only goes to line 5700.
sending a photo
that I can do?
Click to expand...
Click to collapse
So that baseband doesnt include LTE configs or RV Manager cannot read all RV configs
Give QXDM a try, if it doesnt show then flash C6503 is only option )
Here QXDM in the middle of the post
http://forum.xda-developers.com/showpost.php?p=55394190&postcount=142

Thanks

[Request] MBN files from Note 10+ 5G

Can someone share the MBN files from a note 10+ 5G? They may be in /vendor/rfs/msm/mpss/readonly/vendor/mbn/mcfg_sw/ but I don’t have one to know for sure. If you’re rooted, you can get them with https://play.google.com/store/apps/details?id=ma.wanam.partitions and it should highlight them in yellow by default
I have a OnePlus 8 which has the same modem but isn’t able to access all features on ATT. A work around for previous OnePlus phones was to flash the MBN files from a phone with the same modem that ATT has approved for full access, so hopefully this will let that happen.

taurealis said:
Can someone share the MBN files from a note 10+ 5G? They may be in /vendor/rfs/msm/mpss/readonly/vendor/mbn/mcfg_sw/ but I don’t have one to know for sure. If you’re rooted, you can get them with https://play.google.com/store/apps/details?id=ma.wanam.partitions and it should highlight them in yellow by default
I have a OnePlus 8 which has the same modem but isn’t able to access all features on ATT. A work around for previous OnePlus phones was to flash the MBN files from a phone with the same modem that ATT has approved for full access, so hopefully this will let that happen.
Click to expand...
Click to collapse
Did you ever get the mbn files?

taurealis said:
Can someone share the MBN files from a note 10+ 5G? They may be in /vendor/rfs/msm/mpss/readonly/vendor/mbn/mcfg_sw/ but I don’t have one to know for sure. If you’re rooted, you can get them with https://play.google.com/store/apps/details?id=ma.wanam.partitions and it should highlight them in yellow by default
I have a OnePlus 8 which has the same modem but isn’t able to access all features on ATT. A work around for previous OnePlus phones was to flash the MBN files from a phone with the same modem that ATT has approved for full access, so hopefully this will let that happen.
Click to expand...
Click to collapse
Bro una consulta, al decir "modem" te refieres a que usan el modem x24 o te refieres a que usan el mismo mcfg_sw.mbn, porque yo tengo un LG g8x con modem SN855 x24, prueba a poner el MBN de un Xiaomi mi 9T pro, que usan el mismo módem, pero no funcionó. No se a que se debe la incompatibilidad, si deben ser el mismo modem, el mismo snapdragon o el mismo celular, o la misma version de android.
Translated by GT: Bro a query, when you say "modem" you mean that they use the x24 modem or you mean that they use the same mcfg_sw.mbn, because I have an LG g8x with SN855 x24 modem, try to put the MBN of a Xiaomi mi 9T pro, which use the same modem, but it didn't work. I don't know what the incompatibility is due to, if they must be the same modem, the same snapdragon or the same cell phone, or the same version of android.

DiegoKcrz said:
Bro una consulta, al decir "modem" te refieres a que usan el modem x24 o te refieres a que usan el mismo mcfg_sw.mbn, porque yo tengo un LG g8x con modem SN855 x24, prueba a poner el MBN de un Xiaomi mi 9T pro, que usan el mismo módem, pero no funcionó. No se a que se debe la incompatibilidad, si deben ser el mismo modem, el mismo snapdragon o el mismo celular, o la misma version de android.
Translated by GT: Bro a query, when you say "modem" you mean that they use the x24 modem or you mean that they use the same mcfg_sw.mbn, because I have an LG g8x with SN855 x24 modem, try to put the MBN of a Xiaomi mi 9T pro, which use the same modem, but it didn't work. I don't know what the incompatibility is due to, if they must be the same modem, the same snapdragon or the same cell phone, or the same version of android.
Click to expand...
Click to collapse
hehe bro with google translate is enough. Don't make a lot of drama, sometimes I have a hard time understanding slang in English