Develop Bugs

[HELP] HTC Diamond bricked - new piece of furniture

I used a program DiamondUnlocker and I think was for the CMDA version!
It doesn't start anymore, no boot loader, no hard reset! I can't find anything like my problem!
What can I do?

mushufasas said:
What can I do?
Click to expand...
Click to collapse
Send it to the repair center.

how will they fix it??
dont tell me that they will change the motherboard with all its components

fatso485 said:
how will they fix it??
dont tell me that they will change the motherboard with all its components
Click to expand...
Click to collapse
Yes, they´ll change them all.

there's not any other solution ?

is anybody working on finding the jtag points of the diamond??
that should allaw for external flashing on a bricked phone right?

no new ideas?

mushufasas said:
no new ideas?
Click to expand...
Click to collapse
Short of JTAG, there's nothing you can do. But unless you're an engineer, I doubt figuring out JTAG interface will be simple.
JTAG has been done but its still in testing.
I am sorry to hear about your diamond, may it rip. You could use it as a hockey puck...
I think sending to service is your best bet. I am not sure if they will do the work under warranty, but it's worth a shot.

No one has solution for jtag for this model
we made the same mistake ==> phone killed forever.???
this is the first time that i kill a htc ??

hbstun said:
No one has solution for jtag for this model
we made the same mistake ==> phone killed forever.???
this is the first time that i kill a htc ??
Click to expand...
Click to collapse
Try sending it to HTC. They likely won't know what's wrong either as nobody in their right mind would do what you did .

someone have the JTAG cable config?

mushufasas said:
someone have the JTAG cable config?
Click to expand...
Click to collapse
yes i also need this cable (jtag)
thx

Me too, by using DiamondUnlocker for CDMA version(h**p://forum.ppcgeeks.com/showthread.php?t=36062), I killed my diamond (gsm?)
Also I thought that there's only one HTC Diamond model, I was wrong &"#?!!!
So others users watch out!! Do not use it!

JTAG config cable setting
Here the one your looking for...
You can run from desktop.. It worked for me..
MOD EDIT.....ITEM REMOVED

Errr are you sure it's jtag config cable setting? It looks like more another SPL to me?
The device is not recognized by windows as connected(usb), so it's not working at all...
Error[260] : connection

Its a joke man.. dont you like jokes muhahahahahah

JOKE??????
garuda50 said:
its a joke man.. Dont you like jokes muhahahahahah
Click to expand...
Click to collapse
please explain what part of your post is a joke????
if someone damages there phone because of your "joke" please explain yourself

well i bricked my phone flashing my phone.... sooooo I just took it to the Sprint Repair Center and they gave me another one for the free.....Idk if the got the CDMA TD tho soooo... if you got insurance on ya phone go head and do that.
P.S. Just tell em ya phone stopped working and you don't know why.

liamhere said:
please explain what part of your post is a joke????
if someone damages there phone because of your "joke" please explain yourself
Click to expand...
Click to collapse
No comment.. I'm going to sleep right now.. I'm tired

tired
garuda50 said:
No comment.. I'm going to sleep right now.. I'm tired
Click to expand...
Click to collapse
tired.....from all the laughin from your great joke i bet.....
please think before you post a "joke" again.
thank you

[Q] in need of help for Cracking lexi comp medical software for Android

hi to all, plz can anybody help me in finding cracked lexi comp software for android or help me in how to crack it. it comes with 1 month full trial version.
i need to know, how to crack it by extending the 1month time period. since i cant buy it online plz help me

You are asking on the wrong forum.... sorry...

dr.purple said:
hi to all, plz can anybody help me in finding cracked lexi comp software for android or help me in how to crack it. it comes with 1 month full trial version.
i need to know, how to crack it by extending the 1month time period. since i cant buy it online plz help me
Click to expand...
Click to collapse
This site (xda dev) does not do anything illegal. What you're asking is illegal. You wont get any help here at all.

dr.purple said:
hi to all, plz can anybody help me in finding cracked lexi comp software for android or help me in how to crack it. it comes with 1 month full trial version.
i need to know, how to crack it by extending the 1month time period. since i cant buy it online plz help me
Click to expand...
Click to collapse
your asking for a ban posting this

[HELP] My Note 2 just died ! by it's self ....

I've searched and read about this SDS thing ,and i think my phone just had one :crying:
basically it was lying on the table for a few minutes , then i picked it up and tried to start the screen, but nothing happens !
battery removed , charging , sim/sdcard removed ,recovery/download mode didtn show up neither , ALL DID NOT WORK !!!!
its just stuck and wont start up. and it shows that blinking red light near proximity sensor.....
it was perfectly fine a few moments ago but now its just dead.. i am non rooted on stock 4.1.1.
any suggestions please, really in need of the community help now ? :crying:
i've read that in 4.1.2 they fixed it , so is there a way to flash thru Odin while its dead already??
thx

If it IS an SDS, then it's dead and gone. No way to recover. You'll have to send it back to Samsung and they're replace the motherboard. Take your SD card out before you send it.

How do i know it is an SDS ? is there any other specific symptoms that i missed out ?
so far ,nothing worked trying to revive it , black screen with that flashing red (proximity sensor) when i press power or plug it in :crying: .

Did you root it? If not, you can send it back to Samsung for repairs.

Which custom ROM / Kernel were u using before it died ?
Did the kernel has fix for SDS ? like Perseus kernel ?
The recovery your using has SDS fix too ? tell us these details with versions included.

Goodm7sn said:
How do i know it is an SDS ? is there any other specific symptoms that i missed out ?
so far ,nothing worked trying to revive it , black screen with that flashing red (proximity sensor) when i press power or plug it in :crying: .
Click to expand...
Click to collapse
Yup, that's an SDS alright. All of them have the same symptom once dead. Time to call Sammy.

n4naveen said:
Which custom ROM / Kernel were u using before it died ?
Did the kernel has fix for SDS ? like Perseus kernel ?
The recovery your using has SDS fix too ? tell us these details with versions included.
Click to expand...
Click to collapse
He already said he was running stock 4.1.1
Sent from the mighty Note II.

Goodm7sn said:
I've searched and read about this SDS thing ,and i think my phone just had one :crying:
basically it was lying on the table for a few minutes , then i picked it up and tried to start the screen, but nothing happens !
battery removed , charging , sim/sdcard removed ,recovery/download mode didtn show up neither , ALL DID NOT WORK !!!!
its just stuck and wont start up. and it shows that blinking red light near proximity sensor.....
it was perfectly fine a few moments ago but now its just dead.. i am non rooted on stock 4.1.1.
any suggestions please, really in need of the community help now ? :crying:
i've read that in 4.1.2 they fixed it , so is there a way to flash thru Odin while its dead already??
thx
Click to expand...
Click to collapse
i mean this SDS warning was all over the place, im surprised you werent aware that it was highly recommended you upgrade to 4.2.1 or above to avoid this very issue since you seem like an active xda participant.

Goodm7sn said:
I've searched and read about this SDS thing ,and i think my phone just had one :crying:
basically it was lying on the table for a few minutes , then i picked it up and tried to start the screen, but nothing happens !
battery removed , charging , sim/sdcard removed ,recovery/download mode didtn show up neither , ALL DID NOT WORK !!!!
its just stuck and wont start up. and it shows that blinking red light near proximity sensor.....
it was perfectly fine a few moments ago but now its just dead.. i am non rooted on stock 4.1.1.
any suggestions please, really in need of the community help now ? :crying:
i've read that in 4.1.2 they fixed it , so is there a way to flash thru Odin while its dead already??
thx
Click to expand...
Click to collapse
I'm afraid I am on the same boat as you and bad news is they will boot it in download mode and find that the firmware will read 'custom' which means they think you might have rooted the phone and won't repair it free of charge. I am currently looking for ways to deal with them. My case happened in Hong Kong though.....Good Luck to you.

bushako said:
i mean this SDS warning was all over the place, im surprised you werent aware that it was highly recommended you upgrade to 4.2.1 or above to avoid this very issue since you seem like an active xda participant.
Click to expand...
Click to collapse
yeah i am an active participant. but unfortunately, for the past 3 months i was off xda and didnt read or check anything , only if i knew , i truly regret it. bcos updating it wont even take 5 minutes....
the problem is , i made 5 other friends of mine buy Notes 2 !!! now im too scared to tell them all about this ,
very frustrated from Samsung and their stupid software department , cant believe the user have to look after his device bcos they cant get it right. had my Note 1 on the bricking risk due to that emmc bug as well but i took care of it thanks to xda.
jzjman said:
I'm afraid I am on the same boat as you and bad news is they will boot it in download mode and find that the firmware will read 'custom' which means they think you might have rooted the phone and won't repair it free of charge. I am currently looking for ways to deal with them. My case happened in Hong Kong though.....Good Luck to you.
Click to expand...
Click to collapse
how will they find it on "custom"? i've never rooted the device , never felt the need for it, and did that on purpose to keep the warranty.

Goodm7sn said:
yeah i am an active participant. but unfortunately, for the past 3 months i was off xda and didnt read or check anything , only if i knew , i truly regret it. bcos updating it wont even take 5 minutes....
the problem is , i made 5 other friends of mine buy Notes 2 !!! now im too scared to tell them all about this ,
very frustrated from Samsung and their stupid software department , cant believe the user have to look after his device bcos they cant get it right. had my Note 1 on the bricking risk due to that emmc bug as well but i took care of it thanks to xda.
how will they find it on "custom"? i've never rooted the device , never felt the need for it, and did that on purpose to keep the warranty.
Click to expand...
Click to collapse
I think instead of blaming each other for not updating and what not we should be pointing fingers at samsung for their ignorance in this matter. The least you'd expect from them is their acknowledgement of this serious flaw and compensate the customers by offering recalls and updating the phones at the nearest service centers coz not everyone has time or knowledge to do updates and not to mention this is a mandatory update. So many people get turned away from the service center simply because their phones were rooted which has absolutely nothing to do with the cause of SDS to top it up they're still selling the phones off with the old 4.1.1 rom in most places. Just frustrating. Good luck with you getting your issue resolved.
Sent from my GT-N7100 using xda premium

Update :
i got the phone back today from the service center :victory: :laugh: , they repaired it for almost 300$ , fortunately it went under warranty, so i payed nothing (ive never rooted).
they replaced the chip or the motherboard , i dunno what exactly, but still with the emmc checker app i still have that buggy chip !!!!!
i guess im on the safe side now since samsung pushed DMB2 update here in switzerland (4.1.2.) and it came already installed on my repaired phone. however i cant explain the relief (and frustration at Samsung continuous stupidity with high-end devices), since ive been really struggling without my Note 2 (used a cool but very slow nexus one).
thx for the help guys , cheers.

flashing wrong kernel sgs3 t999

by mistake i flashed the kernel of internacional version on my sgs3 t999...so now is hard brick dont do anything only without the baterry conected to the pc a red ligh comes on..and with or without baterry it seems to reconice by the pc ..is there a way to fix it via jtag??? or is really dead??:crying:... some say it can work some say it doesnt im not sure..can somebody now for sure ..please and thank you for ur help ..:fingers-crossed:

vampyro said:
by mistake i flashed the kernel of internacional version on my sgs3 t999...so now is hard brick dont do anything only without the baterry conected to the pc a red ligh comes on..and with or without baterry it seems to reconice by the pc ..is there a way to fix it via jtag??? or is really dead??:crying:... some say it can work some say it doesnt im not sure..can somebody now for sure ..please and thank you for ur help ..:fingers-crossed:
Click to expand...
Click to collapse
From what I have read around here, jtag should save it

mgbotoe said:
From what I have read around here, jtag should save it
Click to expand...
Click to collapse
so its like 100% they can fix it bc it was only the wrong kernel and dont even load bc wasnt compatible and i did the wipe cache and dalvik then flash the original kernel so when i fired it up it try to reboot the went dead..lol damm its really expensive plus im in mexico so its mooooore expensive ..i sent it to the shop today but they said maybe works maybe not.. bc it was all dead... all that for a kernel..man .:crying:

That's why reading is more important than not rushing. It should be fixed from them though. I've yet to read JTAG not fixing a hard brick.
Sent from my SGH-T999 using xda premium

mt3g said:
That's why reading is more important than not rushing. It should be fixed from them though. I've yet to read JTAG not fixing a hard brick.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
thank you guys that keep me a little more confident that ill work..and yes i didnt read it was for an internacional version plus it didnt say that it was for the inter.. version only said it was for sgs3 ..but its true this is a good example why we need to read first...just pray they know what they doing with the phone bc here in mexico people is really crazy u leave ur phone to be repair and the change the inside of the phone sometimes they said ur phone didnt make it but they already change parts from ur phone an dur ill never know ....tomorrow well see :fingers-crossed: thank you for ur help and have a good nite ..:highfive:

wow i didnt expect this but they told me they cant fix my phone with their box..they didnt say wich box they have but they told it my phone wasnt supported by their box that only with RIFF box can do it.. and it seems down here in Mexico only have medusa box and other boxes rare they have RIFF box.. i dont now what to do my Mom is returning to Chicago this thursday maybe only option is to give her my phone so my brother can see if in chicago can fix it.. thats a LOT of trouble just for not reading ..man:crying::crying::crying::crying::crying::crying:

[Q] plz plz plz help me my htc one x soft keys/capacitive keys are not working

Guys i bought a htc one x recently its not even a full month and its soft keys are not working. I have bought it from a shop in second hand condition it was working fine first but one day i was viewing pics and the keys started pressing themselves automatically. I turned off the device and rebooted it again. Still the same thing then i rebooted it again and the buttons stopped working. Guys i have no warranty i visited repair mobile shops and they are saying the whole digitizer would be replaced which costs alot.plz plz plz hellppp me plz. Every thing is working fine. Even im typing this thread with it. But it really really hard to use it now plz any body d the same thing happened plz tell me is there any other i could deal with the situation or i would have to get it repaired the expensive way plz plz plz lemme know what happened with you guys and what should i be doing now.
Thanks in advance

haxanshabbir said:
Guys i bought a htc one x recently its not even a full month and its soft keys are not working. I have bought it from a shop in second hand condition it was working fine first but one day i was viewing pics and the keys started pressing themselves automatically. I turned off the device and rebooted it again. Still the same thing then i rebooted it again and the buttons stopped working. Guys i have no warranty i visited repair mobile shops and they are saying the whole digitizer would be replaced which costs alot.plz plz plz hellppp me plz. Every thing is working fine. Even im typing this thread with it. But it really really hard to use it now plz any body d the same thing happened plz tell me is there any other i could deal with the situation or i would have to get it repaired the expensive way plz plz plz lemme know what happened with you guys and what should i be doing now.
Thanks in advance
Click to expand...
Click to collapse
Hi,
I'm not sure how much help this is but… If the phone is not rooted then you can contact htc and they will help you, if the phone is rooted they will still help but with a price tag
Itai.
Sent from my HTC One X using XDA Premium 4 mobile app

haxanshabbir said:
Guys i bought a htc one x recently its not even a full month and its soft keys are not working. I have bought it from a shop in second hand condition it was working fine first but one day i was viewing pics and the keys started pressing themselves automatically. I turned off the device and rebooted it again. Still the same thing then i rebooted it again and the buttons stopped working. Guys i have no warranty i visited repair mobile shops and they are saying the whole digitizer would be replaced which costs alot.plz plz plz hellppp me plz. Every thing is working fine. Even im typing this thread with it. But it really really hard to use it now plz any body d the same thing happened plz tell me is there any other i could deal with the situation or i would have to get it repaired the expensive way plz plz plz lemme know what happened with you guys and what should i be doing now.
Thanks in advance
Click to expand...
Click to collapse
Had the same problem recently. Probably the only solution is to replace the whole assembly (cant change the digitizer only) which cost me ~50usd from ebay. I have seen some ppl suggesting to "press" all 3 buttons at the same time for 5-10 seconds( this resets them ) tho didnt help my case.
Good luck :good:

didnt work for me
peshko69 said:
Had the same problem recently. Probably the only solution is to replace the whole assembly (cant change the digitizer only) which cost me ~50usd from ebay. I have seen some ppl suggesting to "press" all 3 buttons at the same time for 5-10 seconds( this resets them ) tho didnt help my case.
Good luck :good:
Click to expand...
Click to collapse
i tried that but didnt work i dont want to get it repaired some folks say that try rooting the phone that could help ya installing custom roms etc

haxanshabbir said:
i tried that but didnt work i dont want to get it repaired some folks say that try rooting the phone that could help ya installing custom roms etc
Click to expand...
Click to collapse
If you root warranty is VOID so if you are still covered by the warranty just return it to the shop.