hi there all - bought a second hand note2 (UK sim free)
it has an issue with motion sensors not working so i want to take it to be repaired under warranty but need help clean the phone
have no idea what was attempted before on this phone in regard to roms - it seems to have stock uk 4.1.2 N7100XXDME6
i have rooted it to backup the efs and so will need to unroot it. i have run triangleaway but flash counter is stuck on '1' - cant tell if it has stock or custom recovery - how do i tell? and if it has custom recovery how do i flash stock recovery? is it by flashing stock rom?
everytime i reset the rom to factory default from setting or recovery it still has root - once i unroot how do i clean all root files from my device?
can someone please help me with a list of what i need to do to the phone to make sure it will get through the repair centre?
booting into download mode it says;
odin mode
product name: gt-n7100
custom binary download: no
system status: official
my kernel is
3.0.31-1071214
[email protected] #'1
smp preempt
mmoalem said:
hi there all - bought a second hand note2 (UK sim free)
it has an issue with motion sensors not working so i want to take it to be repaired under warranty but need help clean the phone
have no idea what was attempted before on this phone in regard to roms - it seems to have stock uk 4.1.2 N7100XXDME6
i have rooted it to backup the efs and so will need to unroot it. i have run triangleaway but flash counter is stuck on '1' - cant tell if it has stock or custom recovery - how do i tell? and if it has custom recovery how do i flash stock recovery? is it by flashing stock rom?
everytime i reset the rom to factory default from setting or recovery it still has root - once i unroot how do i clean all root files from my device?
can someone please help me with a list of what i need to do to the phone to make sure it will get through the repair centre?
booting into download mode it says;
odin mode
product name: gt-n7100
custom binary download: no
system status: official
my kernel is
3.0.31-1071214
[email protected] #'1
smp preempt
Click to expand...
Click to collapse
you said flash counter has 1 already but your download mode seems okay..no flash counter..
so just unroot and you are good to go.:good:
sora9009 said:
you said flash counter has 1 already but your download mode seems okay..no flash counter..
so just unroot and you are good to go.:good:
Click to expand...
Click to collapse
thank you
Related
Hello,
I’m looking for some guidance on getting my phone back to completely stock.
Steps I’ve done:
I have re-flashed back to the stock image using Odin. After doing so I wipe/reset. I then had a flash count of 8.
I then used Chainfires method and flashed with Odin to root device, which only installs super SU. I ran triangle away and still had a flash count as one. So I ran triangle away again and clicked the box that disables superSU for an amount of time. The rom went back to official with no flash counts.
Here is where I ran into problems. I ran super SU after seeing I had no flash counts to unroot the device. As soon as I opened superSU I got a flash count back to 1 again and could not update device from original firmware. I tried several different times including full wipe reset after I unrooted with superSU.
So what I did was re-rooted device using odin and install triangle away. I ran the exact same things as before by disabling SuperSU in triangle away and I was back to the official rom and no flash count. I then disabled superSU in manage applications and removed any notifications (force stop).
My phone was able to download the update as it recognized the stock rom, but then when I attempted to install it my phone it did its normal reboot for install and said install failed custom binary etc. Checked and again I had a 1 flash counter.
Possibly where I messed up?
Things I can gather or maybe I’m wrong. I downloaded stock image from Samsung. It was a TAR file. It is a 4.1 file. In addition I know it was for the T889 for T-mobile. Is there a possibility that this is the wrong file? Is there something else I should be flashing to phone with the PDA in any of other slots? Recovery file? Why when I attempt to run superSU unroot does it add a flash counter?
I do not have my original stock image. Phone T889 T-Mobile.
I’m usually pretty good at this stuff, but have run into a rut. I want to return my phone to completely stock and get OTA updates.
Any help would be greatly appreciated! Thank you in advance!!
RSVRMAN1 said:
...I’m usually pretty good at this stuff, but have run into a rut. I want to return my phone to completely stock and get OTA updates.
Any help would be greatly appreciated! Thank you in advance!!
Click to expand...
Click to collapse
If the main goal is to go back to stock to get official OTAs, I'm pretty sure the binary count bit doesn't need to be a worry. What has worked for me is to
- factory reset/wipe data (can do this using custom recovery or just the official stock recovery actually)
- ODIN factory image (I tend to DL them from sammobile)
At that point I had no issue grabbing OTAs - not sure if this helps but I hope it does
dwitherell said:
If the main goal is to go back to stock to get official OTAs, I'm pretty sure the binary count bit doesn't need to be a worry. What has worked for me is to
- factory reset/wipe data (can do this using custom recovery or just the official stock recovery actually)
- ODIN factory image (I tend to DL them from sammobile)
At that point I had no issue grabbing OTAs - not sure if this helps but I hope it does
Click to expand...
Click to collapse
Any response will help thank you!
I downloaded from sammobile as well. Do you download the factory image and install on phone or do you flash the factory image from ODIN.
I should probably clarify I'm trying to update phone by clicking software update. When I click that currently it states. Your device has been modified. Software updates are not available.
This is why I've been going the triangle away superSU route trying to just install the original stock firmware, click update and receive the latest version.
Here some additional info on my kernal and build. I'm not sure if this is possibly wrong?
Currently phone says android 4.1.1 baseband T889UVALL4 Kernel version 3.031-598701 [email protected]#1 SMP PREEMPT Sat Jan 5 19:34:13 KST 2013
Build number JR003C.T889UVALL4
Thanks again!
RSVRMAN1 said:
Any response will help thank you!
I downloaded from sammobile as well. Do you download the factory image and install on phone or do you flash the factory image from ODIN.
I should probably clarify I'm trying to update phone by clicking software update. When I click that currently it states. Your device has been modified. Software updates are not available.
This is why I've been going the triangle away superSU route trying to just install the original stock firmware, click update and receive the latest version.
Here some additional info on my kernal and build. I'm not sure if this is possibly wrong?
Currently phone says android 4.1.1 baseband T889UVALL4 Kernel version 3.031-598701 [email protected]#1 SMP PREEMPT Sat Jan 5 19:34:13 KST 2013
Build number JR003C.T889UVALL4
Thanks again!
Click to expand...
Click to collapse
I used ODIN - and the info looks fine. I had no issue getting the OTA from UVALK8 to UVALL4 using this approach, though is there a particular reason you want to go the click-update path? I ask because sammobile has a factory image of the most current version (UVBMD1) as well... might be a plan B at least.
dwitherell said:
I used ODIN - and the info looks fine. I had no issue getting the OTA from UVALK8 to UVALL4 using this approach, though is there a particular reason you want to go the click-update path? I ask because sammobile has a factory image of the most current version (UVBMD1) as well... might be a plan B at least.
Click to expand...
Click to collapse
I plan on giving the phone to my better half and buy new note 3 eventually. I feel that if I can click and have the phone update I know everything works and wont have to touch it again, while if I install the latest then on the next update I'm unsure if it will update having to flash the new stock rom again.
I love custom roms, but it requires lots of work keeping them up to date and can have various issues that I dont want her to deal with.
I'm wondering if I should try to flash a different stock recovery rom?
Here are 3 separate roms I could install do you have one you would suggest?
cant post the link but its from stockroms dot net
Do I need to install stock recovery on my phone? I guess I thought I just needed to install the factory image. Can you flash stock recovery on Odin or where do you put this into equation?
install stock image/install recovery/root/wipe/triangle away/superSU-unroot/wipe/update
Thanks again for the quick response.
RSVRMAN1 said:
I plan on giving the phone to my better half and buy new note 3 eventually. I feel that if I can click and have the phone update I know everything works and wont have to touch it again, while if I install the latest then on the next update I'm unsure if it will update having to flash the new stock rom again.
I love custom roms, but it requires lots of work keeping them up to date and can have various issues that I dont want her to deal with.
I'm wondering if I should try to flash a different stock recovery rom?
Here are 3 separate roms I could install do you have one you would suggest?
cant post the link but its from stockroms dot net
Do I need to install stock recovery on my phone? I guess I thought I just needed to install the factory image. Can you flash stock recovery on Odin or where do you put this into equation?
install stock image/install recovery/root/wipe/triangle away/superSU-unroot/wipe/update
Thanks again for the quick response.
Click to expand...
Click to collapse
I should clarify the factory images are from note2root DOT com
Going to keep trying to reflash: Just did it again and still keep getting a binary account right after I complete the Full unroot.
Why does it go from official to custom after this last step?
Following Chainfire
If you want to unroot for some reason :
From stock rom and root by Chainfire method all you need to do : Triangle Away app ,SuperSU / setting/ full unroot. Reboot into Recovery / Factory reset.
From custom rom : reflash stock image via Odin .reroot by CF auto root,reset counter with Triangle Away App,SuperSU/Setting/Full unroot . Recovery / Factory reset.
Can find stock firmware from here
Stock T889UVALJ1 & T889UVALK8 (Post 51) http://forum.xda-developers.com/show....php?t=1969551 ( Thank , TeshXX)
Stock + root http://forum.xda-developers.com/show....php?t=1975560 ( Thank , Mr.Robinson )
Tried a different stock firmware 4.1.2 T889 and now wont recognize T-mobile. Anyone have a link to the exact T889 stock firmware that I can just odin-install
Then triangle away/supersu reset and get OTA?
Really would like to get this working. Any help is greatly appreciated.
Try Mr Robinson,
http://forum.xda-developers.com/showthread.php?t=1975560
Sent from my SGH-T889 using xda app-developers app
Today I tried to root my AT&T (d2att) (SGH-i747) just upgraded to 4.3 yesterday. I am completley stock no root no custom recovery. I don't know what happened but it says "firmware upgrade encountered an issue. Please select recovery mode in kies & try again." I can't go into recovery,it won't let me. I ordered a jig (don't have it yet). It says this-
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: yes (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: official
QUALCOMM SECUREBOOT: ENABLE
warranty bit: 0
BOOTLOADER RP SWREV: 2
So can somebody please help? I have download mode but recovery is a no go
bump please help phones been bricked for more than a day now
There is no Odin package for 4.3 OTA so you will have to install an Odin packaged custom recovery such as twrp then install a 4.3 ROM or higher via recovery. 4.4 KiKKat will work too.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hey guys I had a similar problem when I flashed a cf auto root file to the new ota. (sorry if that's a little noobish ) the way I fixed it was in kies being that stated above it's hard to get a Odin flash able 4.3 firmware. So I went into kies>tools>firmware upgrade/installation, (or something along those lines) a heads up you'll need your serial number and model number. Put all that in and it will tell you to put it into recovery mode (they really mean download mode not sure why they call it recovery) then plug it in and it'll download 4.3 and flash it to your device and voila! Not sure if it applies to you but it put my phone into safe mode. A reboot fixed that! I hope I helped you guys! Also another warning you will loose all your data.
Cheers!
hello, I bought this i747 in its current condition. I know nothing about its history.
when I power it on it goes to the phone, !, comp screen saying firmware upgrade encounter an issue, select recovery mode in kies.
in the top corner it says:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: ENABLE
WARRANTY BITS: 0
BOOTLOADER RP SWREV: 2
Now when I connect to kies and run emergency firmware everything loads on kies, then gives an error, and
underneath BOOTLOADER RP SWREV: 2 it says: SW REV CHECK FAIL: Fused 2 > Binary 0 in red.
If this phone fixable? Any help would be appreciated.
mtsosie said:
hello, I bought this i747 in its current condition. I know nothing about its history.
when I power it on it goes to the phone, !, comp screen saying firmware upgrade encounter an issue, select recovery mode in kies.
in the top corner it says:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: ENABLE
WARRANTY BITS: 0
BOOTLOADER RP SWREV: 2
Now when I connect to kies and run emergency firmware everything loads on kies, then gives an error, and
underneath BOOTLOADER RP SWREV: 2 it says: SW REV CHECK FAIL: Fused 2 > Binary 0 in red.
If this phone fixable? Any help would be appreciated.
Click to expand...
Click to collapse
Did you say it was recognized in Kies but firmware recovery failed? If so, and you were using Kies (not Kies 3), we may assume the last system update was not older than Android 4.1.1. I'll suggest you try these steps (in that order),i.e. if one doesn't work, try the next step ..
1. Try booting into recovery mode and doing a hard wipe/reset
2. Download the correct stock image from the thread below and flash via Odin. If you need help with flashing via Odin, please let me know
http://forum.xda-developers.com/showthread.php?t=1739426 or visit Sammobile.com to download the correct stock image.
3. Open Kies. Do not connect the phone yet. Go to Tools => Firmware Upgrade and Initialization. Enter your phone model name (SGH-I747)=>OK and serial number. Check device information inside the battery compartment. Wait for firmware download to complete and you are prompted to connect the phone and follow the rest of the on-screen instructions.
4. Contact the vendor to find out what they did wrong and see what refund options you have
Ok, so I also wasn't able to get into recovery.
I decided to flash cwm via odin. After it flashed the phone rebooted and turned on normally. I have turned it on and off like 5 times and everytime it boots normal.....But, there is still a problem... baseband version is Unknown and there is no IMEI Number.
Larry2999 said:
Did you say it was recognized in Kies but firmware recovery failed? If so, and you were using Kies (not Kies 3), we may assume the last system update was not older than Android 4.1.1. I'll suggest you try these steps (in that order),i.e. if one doesn't work, try the next step ..
1. Try booting into recovery mode and doing a hard wipe/reset
2. Download the correct stock image from the thread below and flash via Odin. If you need help with flashing via Odin, please let me know
http://forum.xda-developers.com/showthread.php?t=1739426 or visit Sammobile.com to download the correct stock image.
3. Open Kies. Do not connect the phone yet. Go to Tools => Firmware Upgrade and Initialization. Enter your phone model name (SGH-I747)=>OK and serial number. Check device information inside the battery compartment. Wait for firmware download to complete and you are prompted to connect the phone and follow the rest of the on-screen instructions.
4. Contact the vendor to find out what they did wrong and see what refund options you have
Click to expand...
Click to collapse
hi, yes those were the steps I tried and the result was fail. Now that I can boot it, it shows its 4.3 but no baseband and no imei.
mtsosie said:
hi, yes those were the steps I tried and the result was fail. Now that I can boot it, it shows its 4.3 but no baseband and no imei.
Click to expand...
Click to collapse
Oh, it's 4.3. Perhaps even better because you may be able to flash the 4.3 restore image. Your baseband/modem is corrupt or missing which is why it's showing the no baseband message.
Please see the thread below for the complete 4.3 stock restore image. Download the stock restore image and flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=2658486
Or you may just flash the 4.3 JB modem via custom recovery since you have custom recovery working. The modem zip can be found here ...
http://www.androidfilehost.com/?fid=23212708291681456
Larry2999 said:
Oh, it's 4.3. Perhaps even better because you may be able to flash the 4.3 restore image. Your baseband/modem is corrupt or missing which is why it's showing the no baseband message.
Please see the thread below for the complete 4.3 stock restore image. Download the stock restore image and flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=2658486
Or you may just flash the 4.3 JB modem via custom recovery since you have custom recovery working. The modem zip can be found here ...
http://www.androidfilehost.com/?fid=23212708291681456
Click to expand...
Click to collapse
:good: right on. you rock man. I flashed the modem and it works great now. thanks again.
mtsosie said:
:good: right on. you rock man. I flashed the modem and it works great now. thanks again.
Click to expand...
Click to collapse
You are most welcome. Glad to know it's now working.
hey guys am in trouble
Odin Refuse to flash
I747 warranty bit :1
bootloader rp swrev 2
SW rev check fail fused 2
Phone stuck on kies firmware upgrade encounterd
I Cant get 4.3 back again or downgrade to any older version
plz help me :'(
here is two screen shot in download mode while odin error
and in normal mode when i try 2 open
dark_darkness said:
hey guys am in trouble
Odin Refuse to flash
I747 warranty bit :1
bootloader rp swrev 2
SW rev check fail fused 2
Phone stuck on kies firmware upgrade encounterd
I Cant get 4.3 back again or downgrade to any older version
plz help me :'(
here is two screen shot in download mode while odin error
and in normal mode when i try 2 open
Click to expand...
Click to collapse
Can you try flashing custom recovery via Odin and then using custom recovery to do a stock restore to 4.3 following the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
can u share a link?
Larry2999 said:
Can you try flashing custom recovery via Odin and then using custom recovery to do a stock restore to 4.3 following the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
i've tried many custom roms
start flashing will and end with bug error at the end coz of warranty
can u share me a link for firmware tested ?
dark_darkness said:
i've tried many custom roms
start flashing will and end with bug error at the end coz of warranty
can u share me a link for firmware tested ?
Click to expand...
Click to collapse
I suggested custom recovery and not custom ROM. The idea is to get your phone back in working order first. Flashing a complete stock restore image should do it. Please refer to the thread I forwarded earlier. You should be able to flash custom recovery (like CWM or TWRP) to your phone via Odin and then use the custom recovery to flash the stock restore image.
Guys,
I have not kept up with Samsung phones and am totally lost. A friend brought me an ATT Note ii that to their knowledge had been rooted. When they tried to do an OTA update, it screwed up and now when i go to download mode, here is what is says:
ODIN MODE
Product name: SGH-I317
Custom Binary Download: YES (10 Counts)
Current Binary: Samsung Official
System Status: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A2
When I try to load a stock rom via Odin, it will go all the way to the end before it errors and show in Red "unsupported"
I would appreciate any help you have on this. I am totally lost but if anyone can fix it, you guys can, Thanks in advance
after doing a little research, i was able to load TWRP recovery, a pre-rooted stock rom of 4.3 and the 4.3 bootloader all though ODIN and got the phone back up and running. My next question is, with my knox warranty showing 1, what are my options as far as roms go? Am i stuck with the stock 4.3 ?
rvdsabu said:
after doing a little research, i was able to load TWRP recovery, a pre-rooted stock rom of 4.3 and the 4.3 bootloader all though ODIN and got the phone back up and running. My next question is, with my knox warranty showing 1, what are my options as far as roms go? Am i stuck with the stock 4.3 ?
Click to expand...
Click to collapse
There are 4.4.2 ROMS in the Android Development threads. Remember to do backups before flashing
rvdsabu said:
after doing a little research, i was able to load TWRP recovery, a pre-rooted stock rom of 4.3 and the 4.3 bootloader all though ODIN and got the phone back up and running. My next question is, with my knox warranty showing 1, what are my options as far as roms go? Am i stuck with the stock 4.3 ?
Click to expand...
Click to collapse
I'm in the same boat here...would you mind telling me how you were able to do this, and specifically, where did you find the rom and bootloader downloads?
trivtrav said:
I'm in the same boat here...would you mind telling me how you were able to do this, and specifically, where did you find the rom and bootloader downloads?
Click to expand...
Click to collapse
If you can get into download mode, can flash 2.8.1.3 twrp via Odin.
Download the latest TWRP from here: http://techerrata.com/browse/twrp2/t0lte
Copy a custom ROM to your external SD card.
Flash TWRP via Odin. Boot into recovery, wipe cache, wipe dalvik, wipe system, flash ROM from external SD card, reboot.
Model Number: [[GT-N7100]]
Android v- 4.3 [[OTA updated]]
Baseband v- N7100DDENA1
Kernel v- 3.0.31-2401794 [email protected] #1 Tue Jan 7 23:01:56 KST 2014
Build no.- JSS15J.N7100DDUENA1
SE for Android Status- Enforcing SEPF_GT-N7100_4.3_0020
Followed-
Root: Achieved by "http://forum.xda-developers.com/showthread.php?t=2143479"
Custom Recovery: Achieved by Odin Flash "Philz Touch 5 CWM Base Version- 6.0.3.7"
Now,
Want to install Custom ROM: "http://forum.xda-developers.com/galaxy-note-2/development/rom-temasek-s-unofficial-cyanogenmod-13-t3294601" :crying:
But, Not sure about Bootloader thing whether it is locked or unlocked..? :crying:
Afraid from SOFT and HARD Brick Conditions.
Help me installing ROM safely..
Please, help this noob..
*Frustrated* :crying:
manpreetsingh16nov said:
Model Number: [[GT-N7100]]
Android v- 4.3 [[OTA updated]]
Baseband v- N7100DDENA1
Kernel v- 3.0.31-2401794 [email protected] #1 Tue Jan 7 23:01:56 KST 2014
Build no.- JSS15J.N7100DDUENA1
SE for Android Status- Enforcing SEPF_GT-N7100_4.3_0020
Followed-
Root: Achieved by "http://forum.xda-developers.com/showthread.php?t=2143479"
Custom Recovery: Achieved by Odin Flash "Philz Touch 5 CWM Base Version- 6.0.3.7"
Now,
Want to install Custom ROM: "http://forum.xda-developers.com/galaxy-note-2/development/rom-temasek-s-unofficial-cyanogenmod-13-t3294601" :crying:
But, Not sure about Bootloader thing whether it is locked or unlocked..? :crying:
Afraid from SOFT and HARD Brick Conditions.
Help me installing ROM safely..
Please, help this noob..
*Frustrated* :crying:
Click to expand...
Click to collapse
There is no such a thing like locked bootloader, you can only trip knox, but I believe it's out of the warranty. Update bootloader and modem with Odin, flash newest TWRP for N7100 and flash your ROM, 10 min and you good to go. Backup everything - nandroid, efs, data and then play with custom ROMs.
Read sticky guides and check everything 2 times before doing some changes
yaro666 said:
There is no such a thing like locked bootloader, you can only trip knox, but I believe it's out of the warranty. Update bootloader and modem with Odin, flash newest TWRP for N7100 and flash your ROM, 10 min and you good to go. Backup everything - nandroid, efs, data and then play with custom ROMs.
Read sticky guides and check everything 2 times before doing some changes
Click to expand...
Click to collapse
Yes, It's out of warranty + Knox- 0x1..
Can you guide me with this stuff "Update bootloader and modem with Odin"..? Please, if you are free..
I think i can do the next part "flash newest TWRP for N7100 " by installing DrKetan_MultiTool_AromaV11.zip in custom recovery..
There is an option to Flash TWRP..
Sorry if i asked/did something dumb and for my bad english too..
Download firmware from sammobile for your device i.e. N7100.
Install 7zip to extract it and copy SBOOT. and modem, then use 7zip again and pack (*.tar) those files separately, so you will have sboot.tar and modem.tar
sboot is the bootloader and modem is...modem.
Use Odin to flash modem and bootloader in download mode, then use also Odin to flash TWRP.
Then go to recovery mode and install your ROM using instructions in ROM thread (1st post).
You have to know that stock ROMs are identified by letters and numbers, the newest is probably OE1, I used bootloader and modem from French ROM.
yaro666 said:
Download firmware from sammobile for your device i.e. N7100.
Install 7zip to extract it and copy SBOOT. and modem, then use 7zip again and pack (*.tar) those files separately, so you will have sboot.tar and modem.tar
sboot is the bootloader and modem is...modem.
Use Odin to flash modem and bootloader in download mode, then use also Odin to flash TWRP.
Then go to recovery mode and install your ROM using instructions in ROM thread (1st post).
You have to know that stock ROMs are identified by letters and numbers, the newest is probably OE1, I used bootloader and modem from French ROM.
Click to expand...
Click to collapse
thank you so much for nice explanation..
i am going to download firmware..
after doing all, will notified you..