Under construction
Haven't seen a post on it yet, apparently we've had a build since the 11th.
Just downloaded and flashing now.
Here is the link
http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/617-d2spr
Use pa gapps
Link later...
Sent from my SPH-L710 using xda app-developers app
Yup. I've been running beta 1.6 since the last few days. No problems at all.
Sent from my SPH-L710 using Tapatalk
ksmullins88 said:
Haven't seen a post on it yet, apparently we've had a build since the 11th.
Just downloaded and flashing now.
Here is the link
http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/617-d2spr
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Which Gapps did you use? Or are they in the Rom already?
88EVGAFTW said:
Which Gapps did you use? Or are they in the Rom already?
Click to expand...
Click to collapse
I use the pa slim module gapps. I'll link later.
I think slim also has a gapps package
Sent from my SPH-L710 using xda app-developers app
Kool! Any working and nonworking list?
Just installed the rom and slim Gapps. I'm liking the Kit Kat look and colors but I cannot for the life of me find the DPI setting anywhere. I usually like 280-300 but this is just too small for me right now. Any ideas?
Oh nice had no idea this was out. Thanks for posting ☺
Written from a Cyanfox
88EVGAFTW said:
Just installed the rom and slim Gapps. I'm liking the Kit Kat look and colors but I cannot for the life of me find the DPI setting anywhere. I usually like 280-300 but this is just too small for me right now. Any ideas?
Click to expand...
Click to collapse
Can edit DPI via buildprop. It's ro.sf.LCD_density=240. Stock for this ROM (I think). If you change number and save. Reboot phone. It'll change to what you want. Just make sure you open as writable so u can change.
Sent from my SPH-L710 using Tapatalk
Weekly 1.8 is out. Clean install recommended, too many changes they said.
Sent from my SPH-L710
Flashed this morn... 1.7... Says not rooted.
Sent from my SPH-L710 using Tapatalk
milky1112 said:
Flashed this morn... 1.7... Says not rooted.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Did you enabled it in Settings /Advanced Options?
Sent from my SPH-L710
csmasn said:
Did you enabled it in Settings /Advanced Options?
Sent from my SPH-L710
Click to expand...
Click to collapse
Indeed! Also had other issues with browser freezing phone.. But that was on 1.7 build. See that 1.9 is out.. So downloading it meow.
I am having a strange issue.
I don't seem to have 3G after installing this ROM. I am flashed to boost mobile. I flashed back to 4.2.2 and I got 3G back.
Anyway, I guess the question is does anyone know what is going on. Also I noticed that all the APN button in settings is greyed out. Is there a reason for this?
Related
In the gNex forums but I tried them . Working great so far w Paranoid 2.5
So here u go http://forum.xda-developers.com/showthread.php?t=1965895
[cwm] 4.2 gapps
Sent from my SPH-D710 using xda app-developers app
Working well over here. PA 2.53. Kinda liking the new Launcher like butter baby!
TheDudeAbides said:
Working well over here. PA 2.53. Kinda liking the new Launcher like butter baby!
Click to expand...
Click to collapse
Yeah it is smooth. Just not as configurable as apex.
Sent from my SPH-D710 using xda app-developers app
I downloaded all the goodies from 4.2 and played with them a few days. The only one that I didn't like was Gmail 4.2. It would not let me attach a file yet, only a pic.
File not found...
Sent from my SPH-D710 using Tapatalk 2
byrdcfmma said:
I downloaded all the goodies from 4.2 and played with them a few days. The only one that I didn't like was Gmail 4.2. It would not let me attach a file yet, only a pic.
Click to expand...
Click to collapse
I thought the same thing, but I browsed through my files and picked a pdf anyhow and it sent just fine. Maybe Google just missed something?
adamw1101 said:
File not found...
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, sorry I meant to update the link. Here's a working one. http://forum.xda-developers.com/showthread.php?t=1965895
themisterwilson said:
I thought the same thing, but I browsed through my files and picked a pdf anyhow and it sent just fine. Maybe Google just missed something?
Click to expand...
Click to collapse
I tried the same thing and it didn't send for me. I tried it both creating the email first and then going to the file and trying to send to there. I'm sure its a minor bug that will be fixed when the official gets released. I may have loaded a different version too. Anyway, I liked everything else on 4.2 release.
byrdcfmma said:
I downloaded all the goodies from 4.2 and played with them a few days. The only one that I didn't like was Gmail 4.2. It would not let me attach a file yet, only a pic.
Click to expand...
Click to collapse
I'm running the leaked Gmail 4.2 and couldn't send a file from my external SD card. I copied it to the internal SD and it sent.
JimSmith94 said:
I'm running the leaked Gmail 4.2 and couldn't send a file from my external SD card. I copied it to the internal SD and it sent.
Click to expand...
Click to collapse
Can I flash these on top of the previous gapps package I flashed or do I have remove them first?
mounting this *****
doing this ****
Rock out
vid recording is a no go.
http://www.androidpolice.com/2012/1...gallery-app-with-new-ui-editing-photo-sphere/
^^^^^^^^^^^^^^^^^^^^
working vers.
EDIT: apparently google took down the downloads :/ i am sofa king we ta did.
i have the file. if you want, pm me
baj24 said:
Can I flash these on top of the previous gapps package I flashed or do I have remove them first?
Click to expand...
Click to collapse
Yes, you want to flash after gapps. I would flash gapps first, reboot, put in Google accounts and make sure everything is running right, reboot to recovery, make a backup, then flash 4.2 goodies.
You can probably do it another way, but this worked for me.
byrdcfmma said:
Yes, you want to flash after gapps. I would flash gapps first, reboot, put in Google accounts and make sure everything is running right, reboot to recovery, make a backup, then flash 4.2 goodies.
You can probably do it another way, but this worked for me.
Click to expand...
Click to collapse
I just flashed my ROM and then these gapps. These gapps are complete. No need to flash any other gapps.
Sent from my SPH-D710 using xda app-developers app
qs504792 said:
mounting this *****
doing this ****
Rock out
vid recording is a no go.
http://www.androidpolice.com/2012/1...gallery-app-with-new-ui-editing-photo-sphere/
^^^^^^^^^^^^^^^^^^^^
working vers.
EDIT: apparently google took down the downloads :/ i am sofa king we ta did.
i have the file. if you want, pm me
Click to expand...
Click to collapse
Yeah video recording isn't working right. If you really need it 8would use jb camera + from the Play store. It's $1.99 but HD recording and everything else works.
PS. The link still works for me. The second link that is.
Sent from my SPH-D710 using xda app-developers app
themisterwilson said:
I just flashed my ROM and then these gapps. These gapps are complete. No need to flash any other gapps.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Sorry about that. The 4.2 gapps I flashed didn't have the keyboard, Gmail, and a couple of other items
byrdcfmma said:
Sorry about that. The 4.2 gapps I flashed didn't have the keyboard, Gmail, and a couple of other items
Click to expand...
Click to collapse
Or the new messaging I really wanted to try it.
hrffd said:
Or the new messaging I really wanted to try it.
Click to expand...
Click to collapse
What's this new messaging? And the only ones that I've flashed were by kill Hack droid or something like that.
Sent from my SPH-D710 using xda app-developers app
I'm actually having a problem sending mms over the new gApps. I'm on cm10 on the epic 4g touch. Anyone else with this issue?
jabbajac said:
I'm actually having a problem sending mms over the new gApps. I'm on cm10 on the epic 4g touch. Anyone else with this issue?
Click to expand...
Click to collapse
That wouldn't be an issue with Gapps but, just to check it out i tested it and it worked fine for me on Cm10 11/18 nightly.
Sent from my SPH-D710 using xda app-developers app
is there a way to pick out only the gmail app and pput it on the d2g?
Sent from my DROID2 Global using Tapatalk 2
Delete
Here is the wifi tether apk modded by TrevE and working on my Jellyblazed LJ7. All credit goes to Treve. I did nothing but share. Show some thanks if this helps. Enjoy!
I selected cdma nexus profile and left disable wakelock checked. Some have reported selecting Samsung S3 profile and it also works.
Here is TrevE's original post in the Verizon forum. ALL credit goes to him!
http://forum.xda-developers.com/showthread.php?t=1988735
Download apk
http://beta.androidfilehost.com/?fid=9390169635556426338
I started this thread with my tethered Asus Prime!
Not working on stock LJ7 TW
Sent from my SPH-L710 using xda app-developers app
sosikfabrications said:
Not working on stock LJ7 TW
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Try choosing the option to install Samsung binaries. That's what I did and works fine on stock rooted LJ7.
chewwy420 said:
Try choosing the option to install Samsung binaries. That's what I did and works fine on stock rooted LJ7.
Click to expand...
Click to collapse
What were your other settings
Sent from my SPH-L710 using xda app-developers app
sosikfabrications said:
Not working on stock LJ7 TW
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
If I'm not mistaken most custom roms have the binaries installed for this to work so the stock LJ7 might not. Install them like he said in the post above and it should work.
sosikfabrications said:
What were your other settings
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Just left everything the way it was when installed and installed Samsung binaries. Device type is set to auto.
chewwy420 said:
Just left everything the way it was when installed and installed Samsung binaries. Device type is set to auto.
Click to expand...
Click to collapse
This. Yes!
Sent from my A500 using xda premium
S3 profile works for me! Thanks for sharing!
Sent from my Galaxy SIII
Still did not work with those settings
Sent from my SPH-L710 using xda app-developers app
sosikfabrications said:
Still did not work with those settings
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Don't change ANYTHING after you install the apk, just install samsung binaries if need be, it is confirmed to work that way. Maybe you tried to put the password on for a secure network? At the moment it doesn't look like it has worked as encrypted for anyone yet.
Just installed and fired it up. Tethered my nexus 7 without changing any settings. I'm running on dazed jelly bean Rom btw.
Sent from my SPH-L710 using xda app-developers app
Anybody have this working on jellybomb 7.0?
*
Rooted Evo dead.
Rooted Evo shift dead.
Rooted Galaxy s3 alive and well!
Doesn't work on freegs3 jb Rom. Idk why it works for some people. I haven't modified Any settings. Then tried to change some stuff but no luck
skwon said:
Doesn't work on freegs3 jb Rom. Idk why it works for some people. I haven't modified Any settings. Then tried to change some stuff but no luck
Click to expand...
Click to collapse
Works for me on FreeGS3... Skwon... Uninstall, boot into recovery and clear both caches.. Reboot... And install the app, don't make any changes to app settings... Then try it...
Sent from my SPH-L710 using Tapatalk 2
Keeps asking for root I allow but congress backup again
Samsung Galaxy S III
---------- Post added at 11:22 AM ---------- Previous post was at 11:20 AM ----------
Ok after a while it just stopped asking thank God lol
Samsung Galaxy S III
Working on goodness 4.0 rom
Naddict said:
Works for me on FreeGS3... Skwon... Uninstall, boot into recovery and clear both caches.. Reboot... And install the app, don't make any changes to app settings... Then try it...
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Hey naddict, I've cleared both caches and installed but still giving me the error when trying to tether. While tethering, do you see the up and down speeds? Amy other ideas?
skwon said:
Hey naddict, I've cleared both caches and installed but still giving me the error when trying to tether. While tethering, do you see the up and down speeds? Amy other ideas?
Click to expand...
Click to collapse
Hmm, it worked for me. Also on Freegs3. Whats the error you're getting?
i get the same...unfortunately tether has stopped..dont know why.anyway to fix
has anyone found a way i can secure the network with password? if you have that enabled, the tether will not work.....
This thread is open for anyone to post a compiled build.
OK I figured we could start a new thread for the nightlys being built for the CM10.2. Anybody building can post
=================================
Scolis builds
Scolis said:
Build 8/31/13 Compiled!
Includes: CyanogenModAccount Integration :good:
Link: http://d-h.st/5LM
Click to expand...
Click to collapse
Scolis said:
Build 8/28/13 Compiled
Cherry-Picks:
Re-enable standalone power collapse on d2 and apex devices
Focal cherry-picks (i will post urls later)
MMS auto download and delay fixes.
Includes: CyanogenModAccount Integration :good:
Link: http://d-h.st/qW9
Click to expand...
Click to collapse
08/25
http://d-h.st/6nv
8/23
http://d-h.st/Kob
8/22
http://d-h.st/Pmw
Cherry-Picks:
Re-enable standalone power collapse on d2 and apex devices
Bluetooth: Fix for the l2cap layer crashes while turning OFF BT
support Samsung extended AGPS
Focal: Fix all the crashes!
Includes: CyanogenModAccount Integration :good:
New 8/20
http://d-h.st/eAJ
Includes Cherry-Pick:
Re-enable standalone power collapse on d2 and apex devices
Includes: CyanogenModAccount integration as requested! Please hit Thanks!!!!
08/19
http://d-h.st/Foh
08/16
http://d-h.st/re5
08/13
http://d-h.st/P0V
08/12
http://d-h.st/VNh
08/11
http://d-h.st/ELa
08/10
http://d-h.st/Wlu
=================================
Bthorne79 build
08/05/2013 build
http://d-h.st/QEd
MD5 Sum: 3eb704d3b341b77dcad66da5f2405482
08/02/2013
http://d-h.st/URr
https://github.com/CyanogenMod
If you don't know how and would like navbar&pie put this in your build prop save and reboot
qemu.hw.mainkeys=0
GAPPS AND STUFF
Goo gapps for cm10.2 (4.3)
http://goo.im/gapps/gapps-jb-20130813-signed.zip
http://goo.im/devs/BaNkS/GApps 4.3
http://db.tt/XtgpOV8v
Sent from my SPH-L710 using xda app-developers app
The best way to say you appreciate the time we put in to doing this is a thanks so don't forget to hit it.
Nice...looking forward to this!
bthorne79 said:
This thread is open for anyone to post a compiled build.
OK I figured we could start a new thread for the nightlys being built for the CM10.2. Anybody building can post hope we can get a nice build till they go official
08/02/2013
http://db.tt/SJuX9u2N
Same focal issues
Also there is no changelogs any one interested in what's changed check the github due to things changing all day
https://github.com/CyanogenMod
Useful files gapps and more(non of these are mine just brought them in to one place)
http://db.tt/XtgpOV8v
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
What about the 4.3 camera, no issues with that? Just the usual focal camera issues?
Sent from my SPH-L710 using Tapatalk 2
I know with CM10.1 LTE didn't ever performing as well as it did on TW. How's LTE on CM10.2? Any different?
Fire Ball said:
I know with CM10.1 LTE didn't ever performing as well as it did on TW. How's LTE on CM10.2? Any different?
Click to expand...
Click to collapse
I live in a non-4g area
CyberGmonster said:
What about the 4.3 camera, no issues with that? Just the usual focal camera issues? I use the photosphere camera and no issues
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Sent from my SPH-L710 using xda app-developers app
Trebuchet
Simple Trebuchet error FC just switched to Holo so far is all pretty quick movement
Yeah some launchers don't work like mihome and qq. I think apex and nova will work also
Framework issue I'm updating my repo and doing a clean build as I type with new merges and commits from earlier before 6pm
Sent from my SPH-L710 using xda app-developers app
wyllem said:
Simple Trebuchet error FC just switched to Holo so far is all pretty quick movement
Click to expand...
Click to collapse
I have not had trebuchet fc yet but thanks
Sent from my SPH-L710 using xda app-developers app
Very nice! 4.3 for the Galaxy S3. I'll try to do a video of this soon!
wwjoshdew said:
Very nice! 4.3 for the Galaxy S3. I'll try to do a video of this soon!
Click to expand...
Click to collapse
Pm me
Sent from my SPH-L710 using xda app-developers app
Lte works amazing on this built of cm 10.2 I am currently in the NYC area haven't done a speedtest but browsing and using Pandora have been snappy. Only issue I have is the WiFi and rapid battery drain with the android system running high I took my phone off the charger at 650 and till now its at 75% alrdy....... most of it standby time
Thought I'd try to flash this rom. Unfortunately I have the same result as 10.1 stable.
Stuck at the Samsung Galaxy SIII splash screen
I have a brand new S3, literally less than a week old...
nidpancho said:
Thought I'd try to flash this rom. Unfortunately I have the same result as 10.1 stable.
Stuck at the Samsung Galaxy SIII splash screen
I have a brand new S3, literally less than a week old...
Click to expand...
Click to collapse
OK what modem are you on?(bootloader) what did you use to root? What recovery?
Have you tried CM10.0.0 first
Sent from my SPH-L710 using xda app-developers app
bthorne79 said:
OK what modem are you on?(bootloader) what did you use to root? What recovery?
Have you tried CM10.0.0 first
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I flashed this to my Virgin Mobile phone to get root and be on MD4, http://rwilco12.com/downloads.php?d...H-L710)/Stock ROMs/JB/MD4/Full Restore/Rooted
I wasn't able to use a custom recovery until this was released yesterday, http://forum.xda-developers.com/showthread.php?t=2391616
The other recoveries would flash just fine (I could install them but they couldn't read any storage) but they wouldn't mount anything. This recovery works perfectly.
I tried all the stable versions up until 10.1.0, some other guy with my same issue tried 10.0 and no dice.
nidpancho said:
I flashed this to my Virgin Mobile phone to get root and be on MD4, http://rwilco12.com/downloads.php?d...H-L710)/Stock ROMs/JB/MD4/Full Restore/Rooted
I wasn't able to use a custom recovery until this was released yesterday, http://forum.xda-developers.com/showthread.php?t=2391616
The other recoveries would flash just fine (I could install them but they couldn't read any storage) but they wouldn't mount anything. This recovery works perfectly.
I tried all the stable versions up until 10.1.0, some other guy with my same issue tried 10.0 and no dice.
Click to expand...
Click to collapse
Have you tried the toolkit
Sent from my SPH-L710 using xda app-developers app
bthorne79 said:
Have you tried the toolkit
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
to ODIN md4?
To do your root and recovery that is what I used. And I use it to reroot&recovery when I wipe my phone back to stock unroot every once in a while I got my phone with the lj7 firmware
Sent from my SPH-L710 using xda app-developers app
nope I stick to odin one clicks mostly. We have tried several different baseband versions and the story remains the same...
only noobnl's build from december 2012 with the boot screen disabled "presumably" has allowed us to boot.
Strange this is new info to me, I've never ran into any issues like that before on any rom. I flash test builds, my own complies and other peoples. I'm on a new ROM just about every week or two.
Sent from my SPH-L710 using xda app-developers app
I had great battery life. Only issue is the known camera and no WiFi other than that great job dude :beer:
Sent from my SPH-L710 using xda premium
I have tried both Paranoid and CM and I can't even login because the phones keyboard won't pop up....I have updated my Gapps. Any suggestions?
Jess813 said:
I have tried both Paranoid and CM and I can't even login because the phones keyboard won't pop up....I have updated my Gapps. Any suggestions?
Click to expand...
Click to collapse
Did you try restoring to check if stock key board works? Also I would look into individual thread to see if anyone else encountered similar issue. I flashed quite a few AOSP ROMs but haven't had this issue.
Sent from my GT-I9505G using xda app-developers app
a103 said:
Did you try restoring to check if stock key board works? Also I would look into individual thread to see if anyone else encountered similar issue. I flashed quite a few AOSP ROMs but haven't had this issue.
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
What do u mean restoring ....
Sent from my SGH-M919 using Tapatalk 2
Jess813 said:
What do u mean restoring ....
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
I meant did you try restoring back to TW rom and installing Google keyboard to see it that works. Sorry if I wasn't clear earlier...
a103 said:
I meant did you try restoring back to TW rom and installing Google keyboard to see it that works. Sorry if I wasn't clear earlier...
Click to expand...
Click to collapse
Yes running TW right now... ciuld it be the recovery?
Jess813 said:
Yes running TW right now... ciuld it be the recovery?
Click to expand...
Click to collapse
Not sure... It could be. I always used CWM and never had an issue you mentioned.
Sent from my Nexus 10 using xda app-developers app
Hi. Thought I'd share this link I found on G+ with you guys. It's an unofficial build of cm11(KitKat) for T Mobile Galaxy Note 2. I own the Att I317 but I'm going to give this a try later. I believe this should work on my device also.
Link- https://plus.google.com/115116555187455487995/posts/H3RPRDD5grt
Sent from my SAMSUNG-SGH-I317 using Tapatalk
I just switched to TWRP ugh. =/
Sent from my SGH-T889 using Xparent Green Tapatalk 2
Lost baseband?
Sent from my SGH-T889 using xda app-developers app
Did you flash with clockwork mod recovery 6.0.4.3? Use Rom manager to flash Clockworkmod recovery. Twrp won't work until it's been updated for our devices.
Sent from my SGH-T889 using Tapatalk
Use newest version of normal non touch cwm. Also use full paranoid android gapps for KitKat to get everything working. You will not have cell service if you do not use cwm.
Can you get it back?
Sent from my Nexus 7 using Tapatalk 2
Could not get pa 4.4 gapps. Link please that works. Thanks
Sent from my SGH-T889 using xda app-developers app
I had switched to TWRP because my current ROM didn't flash right in CWM.
Guess if I want to try this, I'll have to go back. I haven't used a CM based ROM in a while. Anyone here using it?
Sent from my SGH-T889 using Xparent Green Tapatalk 2
Everything seems to work except Art. A few cm features built in. Seems stable and smooth.
Sent from my SGH-T889 using Tapatalk
is this a similar build to the one dw9906 posted? cause im running that and it almost perfect, however the camera FC sometimes, rotation is kinda sticky and flash isnt loading on my xscope browser.
everything else seems pretty solid so far.
EDIT: i guess it is the same build.
Camera hasn't fc on me yet. Rotation seems fine here. Haven't tried flash yet. Don't know if it's the same build. I tried looking for a Cm11 build before I posted this and didn't see one. I must of missed it.
Sent from my SGH-T889 using Tapatalk
I'm getting an invalid device type "t03g" on my SGH-T889 "a3lsght889. This is the correct device type from what I am reading, why am I getting an error?
Also saw a post that said something about the t03g being a clone? Now im worried about fraud on this device. Anyone have any info on this being a fraud or was that one post just misleading? Its labeled as a Samsung note 2 nd all software shows its a Samsung Note2 and all CWM and rotting images worked fine so far.
Do I need to do something special to get it to install? Any info is appreciated.
Edit: It seems the t03g was due to using that devices as a recovery my mistake from another thread. I used Rom manager to install the correct CWM and it was fine after that. Just FYI if people need it.
Thanks,
saridnour
darkchyldx101 said:
Everything seems to work except Art. A few cm features built in. Seems stable and smooth.
Here's a copy of my gapps if you can't find the PA.
Here- SPEC-Gapps-4.4-Alpha.zip - 163.85 MB
Sent from my SGH-T889 using Tapatalk
Click to expand...
Click to collapse
What does ART actually do or what is it for?
Sent from my Note2 W/4.4 KitKat™.
Installed runs smoothly autorotate didn't function at first a reboot after enabling it fixed it. Haven't seen any other problems as of yet. Not many extra cm features that I can see but still awesome. Not liking the zoom feature for the browser but still OK.
skater4690 said:
Installed runs smoothly autorotate didn't function at first a reboot after enabling it fixed it. Haven't seen any other problems as of yet. Not many extra cm features that I can see but still awesome. Not liking the zoom feature for the browser but still OK.
Click to expand...
Click to collapse
+1... pretty much the same experience. need flash working with xscope pro and im set!
Everything works? LTE? S Pen?
one80oneday said:
Everything works? LTE? S Pen?
Click to expand...
Click to collapse
Yes pretty much really stable. LTE also s pen like on TW ROMs no. But it still works to point here or there and also I guess like to write or do other things.
Sent from my Note2 W/4.4 KitKat™.
GRZLA said:
Use newest version of normal non touch cwm. Also use full paranoid android gapps for KitKat to get everything working. You will not have cell service if you do not use cwm.
Click to expand...
Click to collapse
I did everything by the book incl non touch CWM recovery - I get "installation aborted".
Can anyone post MD5 for main zip? Maybe for gapps, too. Thx
NVM Found it @ Dustin's original thread.
Sent from my SGH-T889 using xda app-developers app
Galaxysm said:
What does ART actually do or what is it for?
Sent from my Note2 W/4.4 KitKat™.
Click to expand...
Click to collapse
Art (android run time) is supposed to help speed up android apps and processes. Faster boot, app launching, tasks, scrolling, loading, etc. In the future it may replace dalvik. Right now its in developmental stage.
Sent from my SGH-T889 using Tapatalk
darkchyldx101 said:
Hi. Thought I'd share this link I found on G+ with you guys. It's an unofficial build of cm11(KitKat) for T Mobile Galaxy Note 2. I own the Att I317 but I'm going to give this a try later. I believe this should work on my device also.
Link- https://plus.google.com/115116555187455487995/posts/H3RPRDD5grt
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Dustin creates these personal builds. Not the guy who created the GOOGLE+ thread. Just putting that out there..
Find him here: http://www.twitter.com/slashdw